Loading...
1/*
2 * Linux ARCnet driver - COM20020 chipset support
3 *
4 * Written 1997 by David Woodhouse.
5 * Written 1994-1999 by Avery Pennarun.
6 * Written 1999 by Martin Mares <mj@ucw.cz>.
7 * Derived from skeleton.c by Donald Becker.
8 *
9 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
10 * for sponsoring the further development of this driver.
11 *
12 * **********************
13 *
14 * The original copyright of skeleton.c was as follows:
15 *
16 * skeleton.c Written 1993 by Donald Becker.
17 * Copyright 1993 United States Government as represented by the
18 * Director, National Security Agency. This software may only be used
19 * and distributed according to the terms of the GNU General Public License as
20 * modified by SRC, incorporated herein by reference.
21 *
22 * **********************
23 *
24 * For more details, see drivers/net/arcnet.c
25 *
26 * **********************
27 */
28
29#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
30
31#include <linux/module.h>
32#include <linux/kernel.h>
33#include <linux/types.h>
34#include <linux/ioport.h>
35#include <linux/errno.h>
36#include <linux/delay.h>
37#include <linux/netdevice.h>
38#include <linux/init.h>
39#include <linux/interrupt.h>
40#include <linux/io.h>
41
42#include "arcdevice.h"
43#include "com20020.h"
44
45static const char * const clockrates[] = {
46 "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s",
47 "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s",
48 "Reserved", "Reserved", "Reserved"
49};
50
51static void com20020_command(struct net_device *dev, int command);
52static int com20020_status(struct net_device *dev);
53static void com20020_setmask(struct net_device *dev, int mask);
54static int com20020_reset(struct net_device *dev, int really_reset);
55static void com20020_copy_to_card(struct net_device *dev, int bufnum,
56 int offset, void *buf, int count);
57static void com20020_copy_from_card(struct net_device *dev, int bufnum,
58 int offset, void *buf, int count);
59static void com20020_set_mc_list(struct net_device *dev);
60static void com20020_close(struct net_device *);
61
62static void com20020_copy_from_card(struct net_device *dev, int bufnum,
63 int offset, void *buf, int count)
64{
65 int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
66
67 /* set up the address register */
68 arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag,
69 ioaddr, COM20020_REG_W_ADDR_HI);
70 arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
71
72 /* copy the data */
73 TIME(dev, "insb", count,
74 arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
75}
76
77static void com20020_copy_to_card(struct net_device *dev, int bufnum,
78 int offset, void *buf, int count)
79{
80 int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
81
82 /* set up the address register */
83 arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI);
84 arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
85
86 /* copy the data */
87 TIME(dev, "outsb", count,
88 arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
89}
90
91/* Reset the card and check some basic stuff during the detection stage. */
92int com20020_check(struct net_device *dev)
93{
94 int ioaddr = dev->base_addr, status;
95 struct arcnet_local *lp = netdev_priv(dev);
96
97 arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
98 udelay(5);
99 arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG);
100 mdelay(RESETtime);
101
102 lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
103 lp->setup2 = (lp->clockm << 4) | 8;
104
105 /* CHECK: should we do this for SOHARD cards ? */
106 /* Enable P1Mode for backplane mode */
107 lp->setup = lp->setup | P1MODE;
108
109 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
110 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
111
112 if (lp->clockm != 0) {
113 com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
114 arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
115
116 /* must now write the magic "restart operation" command */
117 mdelay(1);
118 arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
119 }
120
121 lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
122 /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
123 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
124 arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG);
125
126 status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
127
128 if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
129 arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status);
130 return -ENODEV;
131 }
132 arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status);
133
134 arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
135 ioaddr, COM20020_REG_W_COMMAND);
136 status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
137 arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n",
138 status);
139
140 /* Read first location of memory */
141 arcnet_outb(0 | RDDATAflag | AUTOINCflag,
142 ioaddr, COM20020_REG_W_ADDR_HI);
143 arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO);
144
145 status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA);
146 if (status != TESTvalue) {
147 arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n",
148 status);
149 return -ENODEV;
150 }
151 return 0;
152}
153
154static int com20020_set_hwaddr(struct net_device *dev, void *addr)
155{
156 int ioaddr = dev->base_addr;
157 struct arcnet_local *lp = netdev_priv(dev);
158 struct sockaddr *hwaddr = addr;
159
160 dev_addr_set(dev, hwaddr->sa_data);
161 com20020_set_subaddress(lp, ioaddr, SUB_NODE);
162 arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
163
164 return 0;
165}
166
167static int com20020_netdev_open(struct net_device *dev)
168{
169 int ioaddr = dev->base_addr;
170 struct arcnet_local *lp = netdev_priv(dev);
171
172 lp->config |= TXENcfg;
173 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
174
175 return arcnet_open(dev);
176}
177
178static int com20020_netdev_close(struct net_device *dev)
179{
180 int ioaddr = dev->base_addr;
181 struct arcnet_local *lp = netdev_priv(dev);
182
183 arcnet_close(dev);
184
185 /* disable transmitter */
186 lp->config &= ~TXENcfg;
187 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
188 return 0;
189}
190
191const struct net_device_ops com20020_netdev_ops = {
192 .ndo_open = com20020_netdev_open,
193 .ndo_stop = com20020_netdev_close,
194 .ndo_start_xmit = arcnet_send_packet,
195 .ndo_tx_timeout = arcnet_timeout,
196 .ndo_set_mac_address = com20020_set_hwaddr,
197 .ndo_set_rx_mode = com20020_set_mc_list,
198};
199
200/* Set up the struct net_device associated with this card. Called after
201 * probing succeeds.
202 */
203int com20020_found(struct net_device *dev, int shared)
204{
205 struct arcnet_local *lp;
206 int ioaddr = dev->base_addr;
207
208 /* Initialize the rest of the device structure. */
209
210 lp = netdev_priv(dev);
211
212 lp->hw.owner = THIS_MODULE;
213 lp->hw.command = com20020_command;
214 lp->hw.status = com20020_status;
215 lp->hw.intmask = com20020_setmask;
216 lp->hw.reset = com20020_reset;
217 lp->hw.copy_to_card = com20020_copy_to_card;
218 lp->hw.copy_from_card = com20020_copy_from_card;
219 lp->hw.close = com20020_close;
220
221 /* FIXME: do this some other way! */
222 if (!dev->dev_addr[0])
223 arcnet_set_addr(dev, arcnet_inb(ioaddr, 8));
224
225 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
226 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
227
228 if (lp->card_flags & ARC_CAN_10MBIT) {
229 com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
230 arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
231
232 /* must now write the magic "restart operation" command */
233 mdelay(1);
234 arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
235 }
236
237 lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
238 /* Default 0x38 + register: Node ID */
239 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
240 arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
241
242 /* reserve the irq */
243 if (request_irq(dev->irq, arcnet_interrupt, shared,
244 "arcnet (COM20020)", dev)) {
245 arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
246 return -ENODEV;
247 }
248
249 arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
250 lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
251
252 if (lp->backplane)
253 arc_printk(D_NORMAL, dev, "Using backplane mode.\n");
254
255 if (lp->timeout != 3)
256 arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n",
257 lp->timeout);
258
259 arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n",
260 lp->setup >> 1,
261 clockrates[3 -
262 ((lp->setup2 & 0xF0) >> 4) +
263 ((lp->setup & 0x0F) >> 1)]);
264 /* The clockrates array index looks very fragile.
265 * It seems like it could have negative indexing.
266 */
267
268 if (register_netdev(dev)) {
269 free_irq(dev->irq, dev);
270 return -EIO;
271 }
272 return 0;
273}
274
275/* Do a hardware reset on the card, and set up necessary registers.
276 *
277 * This should be called as little as possible, because it disrupts the
278 * token on the network (causes a RECON) and requires a significant delay.
279 *
280 * However, it does make sure the card is in a defined state.
281 */
282static int com20020_reset(struct net_device *dev, int really_reset)
283{
284 struct arcnet_local *lp = netdev_priv(dev);
285 u_int ioaddr = dev->base_addr;
286 u_char inbyte;
287
288 arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
289 __FILE__, __LINE__, __func__, dev, lp, dev->name);
290 arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
291 dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS));
292
293 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
294 lp->config |= (lp->timeout << 3) | (lp->backplane << 2);
295 /* power-up defaults */
296 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
297 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
298
299 if (really_reset) {
300 /* reset the card */
301 arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
302 udelay(5);
303 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
304 mdelay(RESETtime * 2);
305 /* COM20020 seems to be slower sometimes */
306 }
307 /* clear flags & end reset */
308 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
309 arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
310 ioaddr, COM20020_REG_W_COMMAND);
311
312 /* verify that the ARCnet signature byte is present */
313 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
314
315 com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
316 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
317 if (inbyte != TESTvalue) {
318 arc_printk(D_DEBUG, dev, "%s: %d: %s\n",
319 __FILE__, __LINE__, __func__);
320 arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
321 return 1;
322 }
323 /* enable extended (512-byte) packets */
324 arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND);
325
326 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
327
328 /* done! return success. */
329 return 0;
330}
331
332static void com20020_setmask(struct net_device *dev, int mask)
333{
334 u_int ioaddr = dev->base_addr;
335
336 arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr);
337 arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK);
338}
339
340static void com20020_command(struct net_device *dev, int cmd)
341{
342 u_int ioaddr = dev->base_addr;
343
344 arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND);
345}
346
347static int com20020_status(struct net_device *dev)
348{
349 u_int ioaddr = dev->base_addr;
350
351 return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) +
352 (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8);
353}
354
355static void com20020_close(struct net_device *dev)
356{
357 struct arcnet_local *lp = netdev_priv(dev);
358 int ioaddr = dev->base_addr;
359
360 /* disable transmitter */
361 lp->config &= ~TXENcfg;
362 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
363}
364
365/* Set or clear the multicast filter for this adaptor.
366 * num_addrs == -1 Promiscuous mode, receive all packets
367 * num_addrs == 0 Normal mode, clear multicast list
368 * num_addrs > 0 Multicast mode, receive normal and MC packets, and do
369 * best-effort filtering.
370 * FIXME - do multicast stuff, not just promiscuous.
371 */
372static void com20020_set_mc_list(struct net_device *dev)
373{
374 struct arcnet_local *lp = netdev_priv(dev);
375 int ioaddr = dev->base_addr;
376
377 if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {
378 /* Enable promiscuous mode */
379 if (!(lp->setup & PROMISCset))
380 arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n");
381 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
382 lp->setup |= PROMISCset;
383 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
384 } else {
385 /* Disable promiscuous mode, use normal mode */
386 if ((lp->setup & PROMISCset))
387 arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n");
388 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
389 lp->setup &= ~PROMISCset;
390 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
391 }
392}
393
394#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \
395 defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \
396 defined(CONFIG_ARCNET_COM20020_CS_MODULE)
397EXPORT_SYMBOL(com20020_check);
398EXPORT_SYMBOL(com20020_found);
399EXPORT_SYMBOL(com20020_netdev_ops);
400#endif
401
402MODULE_DESCRIPTION("ARCnet COM20020 chipset core driver");
403MODULE_LICENSE("GPL");
404
405#ifdef MODULE
406
407static int __init com20020_module_init(void)
408{
409 if (BUGLVL(D_NORMAL))
410 pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)");
411 return 0;
412}
413
414static void __exit com20020_module_exit(void)
415{
416}
417module_init(com20020_module_init);
418module_exit(com20020_module_exit);
419#endif /* MODULE */
1/*
2 * Linux ARCnet driver - COM20020 chipset support
3 *
4 * Written 1997 by David Woodhouse.
5 * Written 1994-1999 by Avery Pennarun.
6 * Written 1999 by Martin Mares <mj@ucw.cz>.
7 * Derived from skeleton.c by Donald Becker.
8 *
9 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
10 * for sponsoring the further development of this driver.
11 *
12 * **********************
13 *
14 * The original copyright of skeleton.c was as follows:
15 *
16 * skeleton.c Written 1993 by Donald Becker.
17 * Copyright 1993 United States Government as represented by the
18 * Director, National Security Agency. This software may only be used
19 * and distributed according to the terms of the GNU General Public License as
20 * modified by SRC, incorporated herein by reference.
21 *
22 * **********************
23 *
24 * For more details, see drivers/net/arcnet.c
25 *
26 * **********************
27 */
28
29#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
30
31#include <linux/module.h>
32#include <linux/kernel.h>
33#include <linux/types.h>
34#include <linux/ioport.h>
35#include <linux/errno.h>
36#include <linux/delay.h>
37#include <linux/netdevice.h>
38#include <linux/init.h>
39#include <linux/interrupt.h>
40#include <linux/io.h>
41
42#include "arcdevice.h"
43#include "com20020.h"
44
45static const char * const clockrates[] = {
46 "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s",
47 "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s",
48 "Reserved", "Reserved", "Reserved"
49};
50
51static void com20020_command(struct net_device *dev, int command);
52static int com20020_status(struct net_device *dev);
53static void com20020_setmask(struct net_device *dev, int mask);
54static int com20020_reset(struct net_device *dev, int really_reset);
55static void com20020_copy_to_card(struct net_device *dev, int bufnum,
56 int offset, void *buf, int count);
57static void com20020_copy_from_card(struct net_device *dev, int bufnum,
58 int offset, void *buf, int count);
59static void com20020_set_mc_list(struct net_device *dev);
60static void com20020_close(struct net_device *);
61
62static void com20020_copy_from_card(struct net_device *dev, int bufnum,
63 int offset, void *buf, int count)
64{
65 int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
66
67 /* set up the address register */
68 arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag,
69 ioaddr, COM20020_REG_W_ADDR_HI);
70 arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
71
72 /* copy the data */
73 TIME(dev, "insb", count,
74 arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
75}
76
77static void com20020_copy_to_card(struct net_device *dev, int bufnum,
78 int offset, void *buf, int count)
79{
80 int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
81
82 /* set up the address register */
83 arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI);
84 arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
85
86 /* copy the data */
87 TIME(dev, "outsb", count,
88 arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
89}
90
91/* Reset the card and check some basic stuff during the detection stage. */
92int com20020_check(struct net_device *dev)
93{
94 int ioaddr = dev->base_addr, status;
95 struct arcnet_local *lp = netdev_priv(dev);
96
97 arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
98 udelay(5);
99 arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG);
100 mdelay(RESETtime);
101
102 lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
103 lp->setup2 = (lp->clockm << 4) | 8;
104
105 /* CHECK: should we do this for SOHARD cards ? */
106 /* Enable P1Mode for backplane mode */
107 lp->setup = lp->setup | P1MODE;
108
109 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
110 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
111
112 if (lp->clockm != 0) {
113 com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
114 arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
115
116 /* must now write the magic "restart operation" command */
117 mdelay(1);
118 arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
119 }
120
121 lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
122 /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
123 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
124 arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG);
125
126 status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
127
128 if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
129 arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status);
130 return -ENODEV;
131 }
132 arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status);
133
134 arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
135 ioaddr, COM20020_REG_W_COMMAND);
136 status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
137 arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n",
138 status);
139
140 /* Read first location of memory */
141 arcnet_outb(0 | RDDATAflag | AUTOINCflag,
142 ioaddr, COM20020_REG_W_ADDR_HI);
143 arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO);
144
145 status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA);
146 if (status != TESTvalue) {
147 arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n",
148 status);
149 return -ENODEV;
150 }
151 return 0;
152}
153
154static int com20020_set_hwaddr(struct net_device *dev, void *addr)
155{
156 int ioaddr = dev->base_addr;
157 struct arcnet_local *lp = netdev_priv(dev);
158 struct sockaddr *hwaddr = addr;
159
160 dev_addr_set(dev, hwaddr->sa_data);
161 com20020_set_subaddress(lp, ioaddr, SUB_NODE);
162 arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
163
164 return 0;
165}
166
167static int com20020_netdev_open(struct net_device *dev)
168{
169 int ioaddr = dev->base_addr;
170 struct arcnet_local *lp = netdev_priv(dev);
171
172 lp->config |= TXENcfg;
173 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
174
175 return arcnet_open(dev);
176}
177
178static int com20020_netdev_close(struct net_device *dev)
179{
180 int ioaddr = dev->base_addr;
181 struct arcnet_local *lp = netdev_priv(dev);
182
183 arcnet_close(dev);
184
185 /* disable transmitter */
186 lp->config &= ~TXENcfg;
187 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
188 return 0;
189}
190
191const struct net_device_ops com20020_netdev_ops = {
192 .ndo_open = com20020_netdev_open,
193 .ndo_stop = com20020_netdev_close,
194 .ndo_start_xmit = arcnet_send_packet,
195 .ndo_tx_timeout = arcnet_timeout,
196 .ndo_set_mac_address = com20020_set_hwaddr,
197 .ndo_set_rx_mode = com20020_set_mc_list,
198};
199
200/* Set up the struct net_device associated with this card. Called after
201 * probing succeeds.
202 */
203int com20020_found(struct net_device *dev, int shared)
204{
205 struct arcnet_local *lp;
206 int ioaddr = dev->base_addr;
207
208 /* Initialize the rest of the device structure. */
209
210 lp = netdev_priv(dev);
211
212 lp->hw.owner = THIS_MODULE;
213 lp->hw.command = com20020_command;
214 lp->hw.status = com20020_status;
215 lp->hw.intmask = com20020_setmask;
216 lp->hw.reset = com20020_reset;
217 lp->hw.copy_to_card = com20020_copy_to_card;
218 lp->hw.copy_from_card = com20020_copy_from_card;
219 lp->hw.close = com20020_close;
220
221 /* FIXME: do this some other way! */
222 if (!dev->dev_addr[0])
223 arcnet_set_addr(dev, arcnet_inb(ioaddr, 8));
224
225 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
226 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
227
228 if (lp->card_flags & ARC_CAN_10MBIT) {
229 com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
230 arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
231
232 /* must now write the magic "restart operation" command */
233 mdelay(1);
234 arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
235 }
236
237 lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
238 /* Default 0x38 + register: Node ID */
239 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
240 arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
241
242 /* reserve the irq */
243 if (request_irq(dev->irq, arcnet_interrupt, shared,
244 "arcnet (COM20020)", dev)) {
245 arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
246 return -ENODEV;
247 }
248
249 arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
250 lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
251
252 if (lp->backplane)
253 arc_printk(D_NORMAL, dev, "Using backplane mode.\n");
254
255 if (lp->timeout != 3)
256 arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n",
257 lp->timeout);
258
259 arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n",
260 lp->setup >> 1,
261 clockrates[3 -
262 ((lp->setup2 & 0xF0) >> 4) +
263 ((lp->setup & 0x0F) >> 1)]);
264 /* The clockrates array index looks very fragile.
265 * It seems like it could have negative indexing.
266 */
267
268 if (register_netdev(dev)) {
269 free_irq(dev->irq, dev);
270 return -EIO;
271 }
272 return 0;
273}
274
275/* Do a hardware reset on the card, and set up necessary registers.
276 *
277 * This should be called as little as possible, because it disrupts the
278 * token on the network (causes a RECON) and requires a significant delay.
279 *
280 * However, it does make sure the card is in a defined state.
281 */
282static int com20020_reset(struct net_device *dev, int really_reset)
283{
284 struct arcnet_local *lp = netdev_priv(dev);
285 u_int ioaddr = dev->base_addr;
286 u_char inbyte;
287
288 arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
289 __FILE__, __LINE__, __func__, dev, lp, dev->name);
290 arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
291 dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS));
292
293 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
294 lp->config |= (lp->timeout << 3) | (lp->backplane << 2);
295 /* power-up defaults */
296 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
297 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
298
299 if (really_reset) {
300 /* reset the card */
301 arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
302 udelay(5);
303 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
304 mdelay(RESETtime * 2);
305 /* COM20020 seems to be slower sometimes */
306 }
307 /* clear flags & end reset */
308 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
309 arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
310 ioaddr, COM20020_REG_W_COMMAND);
311
312 /* verify that the ARCnet signature byte is present */
313 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
314
315 com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
316 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
317 if (inbyte != TESTvalue) {
318 arc_printk(D_DEBUG, dev, "%s: %d: %s\n",
319 __FILE__, __LINE__, __func__);
320 arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
321 return 1;
322 }
323 /* enable extended (512-byte) packets */
324 arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND);
325
326 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
327
328 /* done! return success. */
329 return 0;
330}
331
332static void com20020_setmask(struct net_device *dev, int mask)
333{
334 u_int ioaddr = dev->base_addr;
335
336 arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr);
337 arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK);
338}
339
340static void com20020_command(struct net_device *dev, int cmd)
341{
342 u_int ioaddr = dev->base_addr;
343
344 arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND);
345}
346
347static int com20020_status(struct net_device *dev)
348{
349 u_int ioaddr = dev->base_addr;
350
351 return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) +
352 (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8);
353}
354
355static void com20020_close(struct net_device *dev)
356{
357 struct arcnet_local *lp = netdev_priv(dev);
358 int ioaddr = dev->base_addr;
359
360 /* disable transmitter */
361 lp->config &= ~TXENcfg;
362 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
363}
364
365/* Set or clear the multicast filter for this adaptor.
366 * num_addrs == -1 Promiscuous mode, receive all packets
367 * num_addrs == 0 Normal mode, clear multicast list
368 * num_addrs > 0 Multicast mode, receive normal and MC packets, and do
369 * best-effort filtering.
370 * FIXME - do multicast stuff, not just promiscuous.
371 */
372static void com20020_set_mc_list(struct net_device *dev)
373{
374 struct arcnet_local *lp = netdev_priv(dev);
375 int ioaddr = dev->base_addr;
376
377 if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {
378 /* Enable promiscuous mode */
379 if (!(lp->setup & PROMISCset))
380 arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n");
381 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
382 lp->setup |= PROMISCset;
383 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
384 } else {
385 /* Disable promiscuous mode, use normal mode */
386 if ((lp->setup & PROMISCset))
387 arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n");
388 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
389 lp->setup &= ~PROMISCset;
390 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
391 }
392}
393
394#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \
395 defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \
396 defined(CONFIG_ARCNET_COM20020_CS_MODULE)
397EXPORT_SYMBOL(com20020_check);
398EXPORT_SYMBOL(com20020_found);
399EXPORT_SYMBOL(com20020_netdev_ops);
400#endif
401
402MODULE_LICENSE("GPL");
403
404#ifdef MODULE
405
406static int __init com20020_module_init(void)
407{
408 if (BUGLVL(D_NORMAL))
409 pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)");
410 return 0;
411}
412
413static void __exit com20020_module_exit(void)
414{
415}
416module_init(com20020_module_init);
417module_exit(com20020_module_exit);
418#endif /* MODULE */