Linux Audio

Check our new training course

Loading...
v6.13.7
  1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Arcnet configuration
  4#
  5
  6menuconfig ARCNET
  7	depends on NETDEVICES && (ISA || PCI || PCMCIA) && HAS_IOPORT
  8	tristate "ARCnet support"
  9	help
 10	  If you have a network card of this type, say Y and check out the
 11	  (arguably) beautiful poetry in
 12	  <file:Documentation/networking/arcnet.rst>.
 13
 14	  You need both this driver, and the driver for the particular ARCnet
 15	  chipset of your card. If you don't know, then it's probably a
 16	  COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
 17	  support" below.
 18
 19	  To compile this driver as a module, choose M here. The module will
 20	  be called arcnet.
 21
 22if ARCNET
 23
 24config ARCNET_1201
 25	tristate "Enable standard ARCNet packet format (RFC 1201)"
 26	help
 27	  This allows you to use RFC1201 with your ARCnet card via the virtual
 28	  arc0 device.  You need to say Y here to communicate with
 29	  industry-standard RFC1201 implementations, like the arcether.com
 30	  packet driver or most DOS/Windows ODI drivers.  Please read the
 31	  ARCnet documentation in <file:Documentation/networking/arcnet.rst>
 32	  for more information about using arc0.
 33
 34config ARCNET_1051
 35	tristate "Enable old ARCNet packet format (RFC 1051)"
 36	help
 37	  This allows you to use RFC1051 with your ARCnet card via the virtual
 38	  arc0s device. You only need arc0s if you want to talk to ARCnet
 39	  software complying with the "old" standard, specifically, the DOS
 40	  arcnet.com packet driver, Amigas running AmiTCP, and some variants
 41	  of NetBSD. You do not need to say Y here to communicate with
 42	  industry-standard RFC1201 implementations, like the arcether.com
 43	  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
 44	  automatically as the arc0 device. Please read the ARCnet
 45	  documentation in <file:Documentation/networking/arcnet.rst> for more
 46	  information about using arc0e and arc0s.
 47
 48config ARCNET_RAW
 49	tristate "Enable raw mode packet interface"
 50	help
 51	  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
 52	  to work unless talking to a copy of the same Linux arcnet driver,
 53	  but perhaps marginally faster in that case.
 54
 55config ARCNET_CAP
 56	tristate "Enable CAP mode packet interface"
 57	help
 58	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
 59	  acknowledge back to userspace. After the initial protocol byte every
 60	  packet is stuffed with an extra 4 byte "cookie" which doesn't
 61	  actually appear on the network. After transmit the driver will send
 62	  back a packet with protocol byte 0 containing the status of the
 63	  transmission:
 64	     0=no hardware acknowledge
 65	     1=excessive nak
 66	     2=transmission accepted by the receiver hardware
 67
 68	  Received packets are also stuffed with the extra 4 bytes but it will
 69	  be random data.
 70
 71	  Cap only listens to protocol 1-8.
 72
 73config ARCNET_COM90xx
 74	tristate "ARCnet COM90xx (normal) chipset driver"
 75	help
 76	  This is the chipset driver for the standard COM90xx cards. If you
 77	  have always used the old ARCnet driver without knowing what type of
 78	  card you had, this is probably the one for you.
 79
 80	  To compile this driver as a module, choose M here. The module will
 81	  be called com90xx.
 82
 83config ARCNET_COM90xxIO
 84	tristate "ARCnet COM90xx (IO mapped) chipset driver"
 85	help
 86	  This is the chipset driver for the COM90xx cards, using them in
 87	  IO-mapped mode instead of memory-mapped mode. This is slower than
 88	  the normal driver. Only use it if your card doesn't support shared
 89	  memory.
 90
 91	  To compile this driver as a module, choose M here. The module will
 92	  be called com90io.
 93
 94config ARCNET_RIM_I
 95	tristate "ARCnet COM90xx (RIM I) chipset driver"
 96	help
 97	  This is yet another chipset driver for the COM90xx cards, but this
 98	  time only using memory-mapped mode, and no IO ports at all. This
 99	  driver is completely untested, so if you have one of these cards,
100	  please mail <dwmw2@infradead.org>, especially if it works!
101
102	  To compile this driver as a module, choose M here. The module will
103	  be called arc-rimi.
104
105config ARCNET_COM20020
106	tristate "ARCnet COM20020 chipset driver"
107	depends on LEDS_CLASS
108	help
109	  This is the driver for the new COM20020 chipset. It supports such
110	  things as promiscuous mode, so packet sniffing is possible, and
111	  extra diagnostic information.
112
113	  To compile this driver as a module, choose M here. The module will
114	  be called com20020.
115
116config ARCNET_COM20020_ISA
117	tristate "Support for COM20020 on ISA"
118	depends on ARCNET_COM20020 && ISA
119
120config ARCNET_COM20020_PCI
121	tristate "Support for COM20020 on PCI"
122	depends on ARCNET_COM20020 && PCI
123
124config ARCNET_COM20020_CS
125	tristate "COM20020 ARCnet PCMCIA support"
126	depends on ARCNET_COM20020 && PCMCIA
127	help
128	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
129	  to your computer.
130
131	  To compile this driver as a module, choose M here: the module will be
132	  called com20020_cs.  If unsure, say N.
133
134endif # ARCNET
v6.2
  1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Arcnet configuration
  4#
  5
  6menuconfig ARCNET
  7	depends on NETDEVICES && (ISA || PCI || PCMCIA)
  8	tristate "ARCnet support"
  9	help
 10	  If you have a network card of this type, say Y and check out the
 11	  (arguably) beautiful poetry in
 12	  <file:Documentation/networking/arcnet.rst>.
 13
 14	  You need both this driver, and the driver for the particular ARCnet
 15	  chipset of your card. If you don't know, then it's probably a
 16	  COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
 17	  support" below.
 18
 19	  To compile this driver as a module, choose M here. The module will
 20	  be called arcnet.
 21
 22if ARCNET
 23
 24config ARCNET_1201
 25	tristate "Enable standard ARCNet packet format (RFC 1201)"
 26	help
 27	  This allows you to use RFC1201 with your ARCnet card via the virtual
 28	  arc0 device.  You need to say Y here to communicate with
 29	  industry-standard RFC1201 implementations, like the arcether.com
 30	  packet driver or most DOS/Windows ODI drivers.  Please read the
 31	  ARCnet documentation in <file:Documentation/networking/arcnet.rst>
 32	  for more information about using arc0.
 33
 34config ARCNET_1051
 35	tristate "Enable old ARCNet packet format (RFC 1051)"
 36	help
 37	  This allows you to use RFC1051 with your ARCnet card via the virtual
 38	  arc0s device. You only need arc0s if you want to talk to ARCnet
 39	  software complying with the "old" standard, specifically, the DOS
 40	  arcnet.com packet driver, Amigas running AmiTCP, and some variants
 41	  of NetBSD. You do not need to say Y here to communicate with
 42	  industry-standard RFC1201 implementations, like the arcether.com
 43	  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
 44	  automatically as the arc0 device. Please read the ARCnet
 45	  documentation in <file:Documentation/networking/arcnet.rst> for more
 46	  information about using arc0e and arc0s.
 47
 48config ARCNET_RAW
 49	tristate "Enable raw mode packet interface"
 50	help
 51	  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
 52	  to work unless talking to a copy of the same Linux arcnet driver,
 53	  but perhaps marginally faster in that case.
 54
 55config ARCNET_CAP
 56	tristate "Enable CAP mode packet interface"
 57	help
 58	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
 59	  acknowledge back to userspace. After the initial protocol byte every
 60	  packet is stuffed with an extra 4 byte "cookie" which doesn't
 61	  actually appear on the network. After transmit the driver will send
 62	  back a packet with protocol byte 0 containing the status of the
 63	  transmission:
 64	     0=no hardware acknowledge
 65	     1=excessive nak
 66	     2=transmission accepted by the receiver hardware
 67
 68	  Received packets are also stuffed with the extra 4 bytes but it will
 69	  be random data.
 70
 71	  Cap only listens to protocol 1-8.
 72
 73config ARCNET_COM90xx
 74	tristate "ARCnet COM90xx (normal) chipset driver"
 75	help
 76	  This is the chipset driver for the standard COM90xx cards. If you
 77	  have always used the old ARCnet driver without knowing what type of
 78	  card you had, this is probably the one for you.
 79
 80	  To compile this driver as a module, choose M here. The module will
 81	  be called com90xx.
 82
 83config ARCNET_COM90xxIO
 84	tristate "ARCnet COM90xx (IO mapped) chipset driver"
 85	help
 86	  This is the chipset driver for the COM90xx cards, using them in
 87	  IO-mapped mode instead of memory-mapped mode. This is slower than
 88	  the normal driver. Only use it if your card doesn't support shared
 89	  memory.
 90
 91	  To compile this driver as a module, choose M here. The module will
 92	  be called com90io.
 93
 94config ARCNET_RIM_I
 95	tristate "ARCnet COM90xx (RIM I) chipset driver"
 96	help
 97	  This is yet another chipset driver for the COM90xx cards, but this
 98	  time only using memory-mapped mode, and no IO ports at all. This
 99	  driver is completely untested, so if you have one of these cards,
100	  please mail <dwmw2@infradead.org>, especially if it works!
101
102	  To compile this driver as a module, choose M here. The module will
103	  be called arc-rimi.
104
105config ARCNET_COM20020
106	tristate "ARCnet COM20020 chipset driver"
107	depends on LEDS_CLASS
108	help
109	  This is the driver for the new COM20020 chipset. It supports such
110	  things as promiscuous mode, so packet sniffing is possible, and
111	  extra diagnostic information.
112
113	  To compile this driver as a module, choose M here. The module will
114	  be called com20020.
115
116config ARCNET_COM20020_ISA
117	tristate "Support for COM20020 on ISA"
118	depends on ARCNET_COM20020 && ISA
119
120config ARCNET_COM20020_PCI
121	tristate "Support for COM20020 on PCI"
122	depends on ARCNET_COM20020 && PCI
123
124config ARCNET_COM20020_CS
125	tristate "COM20020 ARCnet PCMCIA support"
126	depends on ARCNET_COM20020 && PCMCIA
127	help
128	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
129	  to your computer.
130
131	  To compile this driver as a module, choose M here: the module will be
132	  called com20020_cs.  If unsure, say N.
133
134endif # ARCNET