Linux Audio

Check our new training course

Loading...
Note: File does not exist in v6.13.7.
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 *  Support for Cogent CSB726
  4 *
  5 *  Copyright (c) 2008 Dmitry Eremin-Solenikov
  6 */
  7#include <linux/kernel.h>
  8#include <linux/init.h>
  9#include <linux/io.h>
 10#include <linux/gpio/machine.h>
 11#include <linux/platform_device.h>
 12#include <linux/mtd/physmap.h>
 13#include <linux/mtd/partitions.h>
 14#include <linux/sm501.h>
 15#include <linux/smsc911x.h>
 16#include <linux/platform_data/i2c-pxa.h>
 17
 18#include <asm/mach-types.h>
 19#include <asm/mach/arch.h>
 20
 21#include "csb726.h"
 22#include "pxa27x.h"
 23#include <linux/platform_data/mmc-pxamci.h>
 24#include <linux/platform_data/usb-ohci-pxa27x.h>
 25#include <linux/platform_data/asoc-pxa.h>
 26#include "smemc.h"
 27
 28#include "generic.h"
 29#include "devices.h"
 30
 31/*
 32 * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
 33 * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
 34 * XXX: 21,
 35 * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
 36 * XXX: 33 CS_5 for LAN9215 on R1
 37 */
 38
 39static unsigned long csb726_pin_config[] = {
 40	GPIO78_nCS_2, /* EXP_CS */
 41	GPIO79_nCS_3, /* SMSC9215 */
 42	GPIO80_nCS_4, /* SM501 */
 43
 44	GPIO52_GPIO, /* #SMSC9251 int */
 45	GPIO53_GPIO, /* SM501 int */
 46
 47	GPIO1_GPIO, /* GPIO0 */
 48	GPIO11_GPIO, /* GPIO1 */
 49	GPIO9_GPIO, /* GPIO2 */
 50	GPIO10_GPIO, /* GPIO3 */
 51	GPIO16_PWM0_OUT, /* or GPIO4 */
 52	GPIO17_PWM1_OUT, /* or GPIO5 */
 53	GPIO94_GPIO, /* GPIO6 */
 54	GPIO95_GPIO, /* GPIO7 */
 55	GPIO96_GPIO, /* GPIO8 */
 56	GPIO97_GPIO, /* GPIO9 */
 57	GPIO15_GPIO, /* EXP_IRQ */
 58	GPIO18_RDY, /* EXP_WAIT */
 59
 60	GPIO0_GPIO, /* PWR_INT */
 61	GPIO104_GPIO, /* PWR_OFF */
 62
 63	GPIO12_GPIO, /* touch irq */
 64
 65	GPIO13_SSP2_TXD,
 66	GPIO14_SSP2_SFRM,
 67	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
 68	GPIO22_SSP2_SCLK,
 69
 70	GPIO81_SSP3_TXD,
 71	GPIO82_SSP3_RXD,
 72	GPIO83_SSP3_SFRM,
 73	GPIO84_SSP3_SCLK,
 74
 75	GPIO20_GPIO, /* SDIO int */
 76	GPIO32_MMC_CLK,
 77	GPIO92_MMC_DAT_0,
 78	GPIO109_MMC_DAT_1,
 79	GPIO110_MMC_DAT_2,
 80	GPIO111_MMC_DAT_3,
 81	GPIO112_MMC_CMD,
 82	GPIO100_GPIO, /* SD CD */
 83	GPIO101_GPIO, /* SD WP */
 84
 85	GPIO28_AC97_BITCLK,
 86	GPIO29_AC97_SDATA_IN_0,
 87	GPIO30_AC97_SDATA_OUT,
 88	GPIO31_AC97_SYNC,
 89	GPIO113_AC97_nRESET,
 90
 91	GPIO34_FFUART_RXD,
 92	GPIO35_FFUART_CTS,
 93	GPIO36_FFUART_DCD,
 94	GPIO37_FFUART_DSR,
 95	GPIO38_FFUART_RI,
 96	GPIO39_FFUART_TXD,
 97	GPIO40_FFUART_DTR,
 98	GPIO41_FFUART_RTS,
 99
100	GPIO42_BTUART_RXD,
101	GPIO43_BTUART_TXD,
102	GPIO44_BTUART_CTS,
103	GPIO45_BTUART_RTS,
104
105	GPIO46_STUART_RXD,
106	GPIO47_STUART_TXD,
107
108	GPIO48_nPOE,
109	GPIO49_nPWE,
110	GPIO50_nPIOR,
111	GPIO51_nPIOW,
112	GPIO54_nPCE_2,
113	GPIO55_nPREG,
114	GPIO56_nPWAIT,
115	GPIO57_nIOIS16, /* maybe unused */
116	GPIO85_nPCE_1,
117	GPIO98_GPIO, /* CF IRQ */
118	GPIO99_GPIO, /* CF CD */
119	GPIO103_GPIO, /* Reset */
120
121	GPIO117_I2C_SCL,
122	GPIO118_I2C_SDA,
123};
124
125static struct pxamci_platform_data csb726_mci = {
126	.detect_delay_ms	= 500,
127	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
128	/* FIXME setpower */
129};
130
131static struct gpiod_lookup_table csb726_mci_gpio_table = {
132	.dev_id = "pxa2xx-mci.0",
133	.table = {
134		/* Card detect on GPIO 100 */
135		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
136			    "cd", GPIO_ACTIVE_LOW),
137		/* Write protect on GPIO 101 */
138		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
139			    "wp", GPIO_ACTIVE_LOW),
140		{ },
141	},
142};
143
144static struct pxaohci_platform_data csb726_ohci_platform_data = {
145	.port_mode	= PMM_NPS_MODE,
146	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
147};
148
149static struct mtd_partition csb726_flash_partitions[] = {
150	{
151		.name		= "Bootloader",
152		.offset		= 0,
153		.size		= CSB726_FLASH_uMON,
154		.mask_flags	= MTD_WRITEABLE  /* force read-only */
155	},
156	{
157		.name		= "root",
158		.offset		= MTDPART_OFS_APPEND,
159		.size		= MTDPART_SIZ_FULL,
160	}
161};
162
163static struct physmap_flash_data csb726_flash_data = {
164	.width		= 2,
165	.parts		= csb726_flash_partitions,
166	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
167};
168
169static struct resource csb726_flash_resources[] = {
170	{
171		.start          = PXA_CS0_PHYS,
172		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
173		.flags          = IORESOURCE_MEM,
174	}
175};
176
177static struct platform_device csb726_flash = {
178	.name           = "physmap-flash",
179	.dev            = {
180		.platform_data  = &csb726_flash_data,
181	},
182	.resource       = csb726_flash_resources,
183	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
184};
185
186static struct resource csb726_sm501_resources[] = {
187	{
188		.start          = PXA_CS4_PHYS,
189		.end            = PXA_CS4_PHYS + SZ_8M - 1,
190		.flags          = IORESOURCE_MEM,
191		.name		= "sm501-localmem",
192	},
193	{
194		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
195		.end            = PXA_CS4_PHYS + SZ_64M - 1,
196		.flags          = IORESOURCE_MEM,
197		.name		= "sm501-regs",
198	},
199	{
200		.start		= CSB726_IRQ_SM501,
201		.end		= CSB726_IRQ_SM501,
202		.flags		= IORESOURCE_IRQ,
203	},
204};
205
206static struct sm501_initdata csb726_sm501_initdata = {
207/*	.devices	= SM501_USE_USB_HOST, */
208	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
209};
210
211static struct sm501_platdata csb726_sm501_platdata = {
212	.init		= &csb726_sm501_initdata,
213};
214
215static struct platform_device csb726_sm501 = {
216	.name		= "sm501",
217	.id		= 0,
218	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
219	.resource	= csb726_sm501_resources,
220	.dev		= {
221		.platform_data = &csb726_sm501_platdata,
222	},
223};
224
225static struct resource csb726_lan_resources[] = {
226	{
227		.start	= PXA_CS3_PHYS,
228		.end	= PXA_CS3_PHYS + SZ_64K - 1,
229		.flags	= IORESOURCE_MEM,
230	},
231	{
232		.start	= CSB726_IRQ_LAN,
233		.end	= CSB726_IRQ_LAN,
234		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
235	},
236};
237
238struct smsc911x_platform_config csb726_lan_config = {
239	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
240	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
241	.flags		= SMSC911X_USE_32BIT,
242	.phy_interface	= PHY_INTERFACE_MODE_MII,
243};
244
245
246static struct platform_device csb726_lan = {
247	.name		= "smsc911x",
248	.id		= -1,
249	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
250	.resource	= csb726_lan_resources,
251	.dev		= {
252		.platform_data	= &csb726_lan_config,
253	},
254};
255
256static struct platform_device *devices[] __initdata = {
257	&csb726_flash,
258	&csb726_sm501,
259	&csb726_lan,
260};
261
262static void __init csb726_init(void)
263{
264	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
265/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
266/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
267	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
268
269	pxa_set_ffuart_info(NULL);
270	pxa_set_btuart_info(NULL);
271	pxa_set_stuart_info(NULL);
272	pxa_set_i2c_info(NULL);
273	pxa27x_set_i2c_power_info(NULL);
274	gpiod_add_lookup_table(&csb726_mci_gpio_table);
275	pxa_set_mci_info(&csb726_mci);
276	pxa_set_ohci_info(&csb726_ohci_platform_data);
277	pxa_set_ac97_info(NULL);
278
279	platform_add_devices(devices, ARRAY_SIZE(devices));
280}
281
282MACHINE_START(CSB726, "Cogent CSB726")
283	.atag_offset	= 0x100,
284	.map_io         = pxa27x_map_io,
285	.nr_irqs	= PXA_NR_IRQS,
286	.init_irq       = pxa27x_init_irq,
287	.handle_irq       = pxa27x_handle_irq,
288	.init_machine   = csb726_init,
289	.init_time	= pxa_timer_init,
290	.restart	= pxa_restart,
291MACHINE_END