1// SPDX-License-Identifier: GPL-2.0+ OR MIT
  2/*
  3 * Copyright 2014-2020 Toradex
  4 */
  5
  6/ {
  7	chosen {
  8		stdout-path = "serial0:115200n8";
  9	};
 10
 11	clk16m: clk16m {
 12		compatible = "fixed-clock";
 13		#clock-cells = <0>;
 14		clock-frequency = <16000000>;
 15	};
 16
 17	panel: panel {
 18		compatible = "edt,et057090dhu";
 19		backlight = <&bl>;
 20
 21		port {
 22			panel_in: endpoint {
 23				remote-endpoint = <&dcu_out>;
 24			};
 25		};
 26	};
 27
 28	reg_3v3: regulator-3v3 {
 29		compatible = "regulator-fixed";
 30		regulator-name = "3.3V";
 31		regulator-min-microvolt = <3300000>;
 32		regulator-max-microvolt = <3300000>;
 33	};
 34
 35	reg_5v0: regulator-5v0 {
 36		compatible = "regulator-fixed";
 37		regulator-name = "5V";
 38		regulator-min-microvolt = <5000000>;
 39		regulator-max-microvolt = <5000000>;
 40	};
 41
 42	reg_usbh_vbus: regulator-usbh-vbus {
 43		compatible = "regulator-fixed";
 44		pinctrl-names = "default";
 45		pinctrl-0 = <&pinctrl_usbh1_reg>;
 46		regulator-name = "VCC_USB[1-4]";
 47		regulator-min-microvolt = <5000000>;
 48		regulator-max-microvolt = <5000000>;
 49		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
 50		vin-supply = <&reg_5v0>;
 51	};
 52};
 53
 54&bl {
 55	brightness-levels = <0 4 8 16 32 64 128 255>;
 56	default-brightness-level = <6>;
 57	power-supply = <&reg_3v3>;
 58	status  = "okay";
 59};
 60
 61&dcu0 {
 62	pinctrl-names = "default";
 63	pinctrl-0 = <&pinctrl_dcu0_1>;
 64	status = "okay";
 65
 66	port {
 67		dcu_out: endpoint {
 68			remote-endpoint = <&panel_in>;
 69		};
 70	};
 71};
 72
 73&dspi1 {
 74	status = "okay";
 75
 76	mcp2515can: can@0 {
 77		compatible = "microchip,mcp2515";
 78		pinctrl-names = "default";
 79		pinctrl-0 = <&pinctrl_can_int>;
 80		reg = <0>;
 81		clocks = <&clk16m>;
 82		spi-max-frequency = <10000000>;
 83		interrupt-parent = <&gpio1>;
 84		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
 85	};
 86};
 87
 88&esdhc1 {
 89	pinctrl-names = "default";
 90	pinctrl-0 = <&pinctrl_esdhc1>;
 91	bus-width = <4>;
 92	status = "okay";
 93};
 94
 95&fec1 {
 96	phy-mode = "rmii";
 97	pinctrl-names = "default";
 98	pinctrl-0 = <&pinctrl_fec1>;
 99	status = "okay";
100};
101
102&i2c0 {
103	status = "okay";
104
105	/* M41T0M6 real time clock on carrier board */
106	rtc: rtc@68 {
107		compatible = "st,m41t0";
108		reg = <0x68>;
109	};
110};
111
112&pwm0 {
113	status = "okay";
114};
115
116&pwm1 {
117	status = "okay";
118};
119
120&reg_module_3v3 {
121	vin-supply = <&reg_3v3>;
122};
123
124&tcon0 {
125	status = "okay";
126};
127
128&uart0 {
129	status = "okay";
130};
131
132&uart1 {
133	status = "okay";
134};
135
136&uart2 {
137	status = "okay";
138};
139
140&usbh1 {
141	vbus-supply = <&reg_usbh_vbus>;
142};
143
144&iomuxc {
145	vf610-colibri {
146		pinctrl_can_int: can_int {
147			fsl,pins = <
148				VF610_PAD_PTB21__GPIO_43	0x22ed
149			>;
150		};
151	};
152};