Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/input/input.h>
5#include "tegra20-colibri.dtsi"
6
7/ {
8 model = "Toradex Colibri T20 on Iris";
9 compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20",
10 "nvidia,tegra20";
11
12 aliases {
13 rtc0 = "/i2c@7000c000/rtc@68";
14 rtc1 = "/i2c@7000d000/pmic@34";
15 rtc2 = "/rtc@7000e000";
16 serial0 = &uarta;
17 serial1 = &uartd;
18 serial2 = &uartb;
19 };
20
21 chosen {
22 stdout-path = "serial0:115200n8";
23 };
24
25 host1x@50000000 {
26 dc@54200000 {
27 rgb {
28 status = "okay";
29 nvidia,panel = <&panel>;
30 };
31 };
32
33 hdmi@54280000 {
34 status = "okay";
35 hdmi-supply = <®_5v0>;
36 };
37 };
38
39 pinmux@70000014 {
40 state_default: pinmux {
41 bl-on {
42 nvidia,tristate = <TEGRA_PIN_DISABLE>;
43 };
44
45 ddc {
46 nvidia,tristate = <TEGRA_PIN_DISABLE>;
47 };
48
49 hotplug-detect {
50 nvidia,tristate = <TEGRA_PIN_DISABLE>;
51 };
52
53 i2c {
54 nvidia,tristate = <TEGRA_PIN_DISABLE>;
55 };
56
57 lcd {
58 nvidia,tristate = <TEGRA_PIN_DISABLE>;
59 };
60
61 lm1 {
62 nvidia,tristate = <TEGRA_PIN_DISABLE>;
63 };
64
65 mmc {
66 nvidia,tristate = <TEGRA_PIN_DISABLE>;
67 };
68
69 mmccd {
70 nvidia,tristate = <TEGRA_PIN_DISABLE>;
71 };
72
73 sdc {
74 nvidia,tristate = <TEGRA_PIN_DISABLE>;
75 };
76
77 sdb_sdd {
78 nvidia,tristate = <TEGRA_PIN_DISABLE>;
79 };
80
81 ssp {
82 nvidia,tristate = <TEGRA_PIN_DISABLE>;
83 };
84
85 uart-a {
86 nvidia,tristate = <TEGRA_PIN_DISABLE>;
87 };
88
89 uart-b {
90 nvidia,tristate = <TEGRA_PIN_DISABLE>;
91 };
92
93 uart-c {
94 nvidia,tristate = <TEGRA_PIN_DISABLE>;
95 };
96
97 usbh-pen {
98 nvidia,tristate = <TEGRA_PIN_DISABLE>;
99 };
100 };
101 };
102
103 /* Colibri UART-A */
104 serial@70006000 {
105 status = "okay";
106 };
107
108 /* Colibri UART-C */
109 serial@70006040 {
110 status = "okay";
111 };
112
113 /* Colibri UART-B */
114 serial@70006300 {
115 status = "okay";
116 };
117
118 pwm@7000a000 {
119 status = "okay";
120 };
121
122 /*
123 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
124 * board)
125 */
126 i2c@7000c000 {
127 status = "okay";
128 clock-frequency = <400000>;
129
130 /* M41T0M6 real time clock on carrier board */
131 rtc@68 {
132 compatible = "st,m41t0";
133 reg = <0x68>;
134 };
135 };
136
137 /* GEN2_I2C: unused */
138
139 /* CAM_I2C (I2C3): unused */
140
141 /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
142 i2c@7000c400 {
143 status = "okay";
144 };
145
146 /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
147 usb@c5000000 {
148 status = "okay";
149 dr_mode = "otg";
150 };
151
152 usb-phy@c5000000 {
153 status = "okay";
154 vbus-supply = <®_usbc_vbus>;
155 };
156
157 /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
158 usb@c5008000 {
159 status = "okay";
160 };
161
162 usb-phy@c5008000 {
163 status = "okay";
164 vbus-supply = <®_usbh_vbus>;
165 };
166
167 /* SPI4: Colibri SSP */
168 spi@7000da00 {
169 status = "okay";
170 spi-max-frequency = <25000000>;
171 };
172
173 /* SD/MMC */
174 mmc@c8000600 {
175 status = "okay";
176 bus-width = <4>;
177 cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
178 no-1-8-v;
179 };
180
181 backlight: backlight {
182 compatible = "pwm-backlight";
183 brightness-levels = <255 128 64 32 16 8 4 0>;
184 default-brightness-level = <6>;
185 /* BL_ON */
186 enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
187 power-supply = <®_3v3>;
188 pwms = <&pwm 0 5000000>; /* PWM<A> */
189 };
190
191 gpio-keys {
192 compatible = "gpio-keys";
193
194 key-wakeup {
195 label = "SODIMM pin 45 wakeup";
196 gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
197 linux,code = <KEY_WAKEUP>;
198 debounce-interval = <10>;
199 wakeup-source;
200 };
201 };
202
203 panel: panel {
204 /*
205 * edt,et057090dhu: EDT 5.7" LCD TFT
206 * edt,et070080dh6: EDT 7.0" LCD TFT
207 */
208 compatible = "edt,et057090dhu";
209 backlight = <&backlight>;
210 power-supply = <®_3v3>;
211 };
212
213 reg_3v3: regulator-3v3 {
214 compatible = "regulator-fixed";
215 regulator-name = "3.3V";
216 regulator-min-microvolt = <3300000>;
217 regulator-max-microvolt = <3300000>;
218 };
219
220 reg_5v0: regulator-5v0 {
221 compatible = "regulator-fixed";
222 regulator-name = "5V";
223 regulator-min-microvolt = <5000000>;
224 regulator-max-microvolt = <5000000>;
225 };
226
227 reg_usbc_vbus: regulator-usbc-vbus {
228 compatible = "regulator-fixed";
229 regulator-name = "VCC_USB2";
230 regulator-min-microvolt = <5000000>;
231 regulator-max-microvolt = <5000000>;
232 vin-supply = <®_5v0>;
233 };
234
235 /* USBH_PEN resp. USB_P_EN */
236 reg_usbh_vbus: regulator-usbh-vbus {
237 compatible = "regulator-fixed";
238 regulator-name = "VCC_USB1";
239 regulator-min-microvolt = <5000000>;
240 regulator-max-microvolt = <5000000>;
241 gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
242 vin-supply = <®_5v0>;
243 };
244};