1// SPDX-License-Identifier: GPL-2.0
  2/dts-v1/;
  3
  4#include "kirkwood.dtsi"
  5#include "kirkwood-6281.dtsi"
  6
  7/ {
  8	model = "MPL CEC4";
  9	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 10
 11	memory {
 12		device_type = "memory";
 13		reg = <0x00000000 0x20000000>;
 14	};
 15
 16	chosen {
 17		bootargs = "console=ttyS0,115200n8 earlyprintk";
 18		stdout-path = &uart0;
 19	};
 20
 21	ocp@f1000000 {
 22		pinctrl: pin-controller@10000 {
 23			pmx_led_health: pmx-led-health {
 24				marvell,pins = "mpp7";
 25				marvell,function = "gpo";
 26			};
 27
 28			pmx_sata1: pmx-sata1 {
 29				marvell,pins = "mpp34";
 30				marvell,function = "sata1";
 31			};
 32
 33			pmx_sata0: pmx-sata0 {
 34				marvell,pins = "mpp35";
 35				marvell,function = "sata0";
 36			};
 37
 38			pmx_led_user1o: pmx-led-user1o {
 39				marvell,pins = "mpp40";
 40				marvell,function = "gpio";
 41			};
 42
 43			pmx_led_user1g: pmx-led-user1g {
 44				marvell,pins = "mpp41";
 45				marvell,function = "gpio";
 46			};
 47
 48			pmx_led_user0o: pmx-led-user0o {
 49				marvell,pins = "mpp44";
 50				marvell,function = "gpio";
 51			};
 52
 53			pmx_led_user0g: pmx-led-user0g {
 54				marvell,pins = "mpp45";
 55				marvell,function = "gpio";
 56			};
 57
 58			pmx_led_misc: pmx-led-misc {
 59				marvell,pins = "mpp46";
 60				marvell,function = "gpio";
 61			};
 62
 63			pmx_sdio_cd: pmx-sdio-cd {
 64				marvell,pins = "mpp47";
 65				marvell,function = "gpio";
 66			};
 67		};
 68
 69		i2c@11000 {
 70			status = "okay";
 71
 72			rtc@51 {
 73				compatible = "nxp,pcf8563";
 74				reg = <0x51>;
 75			};
 76
 77			eeprom@57 {
 78				compatible = "atmel,24c02";
 79				reg = <0x57>;
 80			};
 81
 82		};
 83
 84		serial@12000 {
 85			status = "okay";
 86		};
 87
 88		rtc@10300 {
 89			status = "disabled";
 90		};
 91
 92		sata@80000 {
 93			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
 94			pinctrl-names = "default";
 95			nr-ports = <2>;
 96			status = "okay";
 97		};
 98
 99		mvsdio@90000 {
100			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
101			pinctrl-names = "default";
102			status = "okay";
103			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
104			/* No WP GPIO */
105		};
106	};
107
108	gpio-leds {
109		compatible = "gpio-leds";
110		pinctrl-0 = < &pmx_led_health
111			      &pmx_led_user1o
112			      &pmx_led_user1g &pmx_led_user0o
113			      &pmx_led_user0g &pmx_led_misc
114			    >;
115		pinctrl-names = "default";
116
117		health {
118			label = "status:green:health";
119			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
120		};
121
122		user1o {
123			label = "user1:orange";
124			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
125			default-state = "on";
126		};
127
128		user1g {
129			label = "user1:green";
130			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
131			default-state = "on";
132		};
133
134		user0o {
135			label = "user0:orange";
136			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
137			default-state = "on";
138		};
139
140		user0g {
141			label = "user0:green";
142			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
143			default-state = "on";
144		};
145
146		misc {
147			label = "status:orange:misc";
148			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
149			default-state = "on";
150		};
151
152	};
153};
154
155&nand {
156	status = "okay";
157
158	partition@0 {
159		label = "uboot";
160		reg = <0x0000000 0x100000>;
161	};
162
163	partition@100000 {
164		label = "env";
165		reg = <0x100000 0x80000>;
166	};
167
168	partition@180000 {
169		label = "fdt";
170		reg = <0x180000 0x80000>;
171	};
172
173	partition@200000 {
174		label = "kernel";
175		reg = <0x200000 0x400000>;
176	};
177
178	partition@600000 {
179		label = "rootfs";
180		reg = <0x600000 0x1fa00000>;
181	};
182};
183
184&mdio {
185	status = "okay";
186
187	ethphy0: ethernet-phy@1 {
188		reg = <1>;
189	};
190
191	ethphy1: ethernet-phy@2 {
192		reg = <2>;
193	};
194};
195
196&eth0 {
197	status = "okay";
198	ethernet0-port@0 {
199		phy-handle = <&ethphy0>;
200	};
201};
202
203&eth1 {
204	status = "okay";
205	ethernet1-port@0 {
206		phy-handle = <&ethphy1>;
207	};
208};
209
210&pciec {
211	status = "okay";
212};
213
214&pcie0 {
215	status = "okay";
216};