Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Copyright 2015 Freescale Semiconductor, Inc.
4// Copyright 2016 Toradex AG
5
6#include <dt-bindings/clock/imx7d-clock.h>
7#include <dt-bindings/power/imx7-power.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/input.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11#include <dt-bindings/reset/imx7-reset.h>
12#include "imx7d-pinfunc.h"
13
14/ {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 /*
18 * The decompressor and also some bootloaders rely on a
19 * pre-existing /chosen node to be available to insert the
20 * command line and merge other ATAGS info.
21 */
22 chosen {};
23
24 aliases {
25 gpio0 = &gpio1;
26 gpio1 = &gpio2;
27 gpio2 = &gpio3;
28 gpio3 = &gpio4;
29 gpio4 = &gpio5;
30 gpio5 = &gpio6;
31 gpio6 = &gpio7;
32 i2c0 = &i2c1;
33 i2c1 = &i2c2;
34 i2c2 = &i2c3;
35 i2c3 = &i2c4;
36 mmc0 = &usdhc1;
37 mmc1 = &usdhc2;
38 mmc2 = &usdhc3;
39 serial0 = &uart1;
40 serial1 = &uart2;
41 serial2 = &uart3;
42 serial3 = &uart4;
43 serial4 = &uart5;
44 serial5 = &uart6;
45 serial6 = &uart7;
46 spi0 = &ecspi1;
47 spi1 = &ecspi2;
48 spi2 = &ecspi3;
49 spi3 = &ecspi4;
50 usb0 = &usbotg1;
51 usb1 = &usbh;
52 };
53
54 cpus {
55 #address-cells = <1>;
56 #size-cells = <0>;
57
58 idle-states {
59 entry-method = "psci";
60
61 cpu_sleep_wait: cpu-sleep-wait {
62 compatible = "arm,idle-state";
63 arm,psci-suspend-param = <0x0010000>;
64 local-timer-stop;
65 entry-latency-us = <100>;
66 exit-latency-us = <50>;
67 min-residency-us = <1000>;
68 };
69 };
70
71 cpu0: cpu@0 {
72 compatible = "arm,cortex-a7";
73 device_type = "cpu";
74 reg = <0>;
75 clock-frequency = <792000000>;
76 clock-latency = <61036>; /* two CLK32 periods */
77 clocks = <&clks IMX7D_CLK_ARM>;
78 cpu-idle-states = <&cpu_sleep_wait>;
79 operating-points-v2 = <&cpu0_opp_table>;
80 #cooling-cells = <2>;
81 nvmem-cells = <&fuse_grade>;
82 nvmem-cell-names = "speed_grade";
83 };
84 };
85
86 cpu0_opp_table: opp-table {
87 compatible = "operating-points-v2";
88 opp-shared;
89
90 opp-792000000 {
91 opp-hz = /bits/ 64 <792000000>;
92 opp-microvolt = <1000000>;
93 clock-latency-ns = <150000>;
94 opp-supported-hw = <0xf>, <0xf>;
95 };
96 };
97
98 ckil: clock-cki {
99 compatible = "fixed-clock";
100 #clock-cells = <0>;
101 clock-frequency = <32768>;
102 clock-output-names = "ckil";
103 };
104
105 osc: clock-osc {
106 compatible = "fixed-clock";
107 #clock-cells = <0>;
108 clock-frequency = <24000000>;
109 clock-output-names = "osc";
110 };
111
112 usbphynop1: usbphynop1 {
113 compatible = "usb-nop-xceiv";
114 clocks = <&clks IMX7D_USB_PHY1_CLK>;
115 clock-names = "main_clk";
116 #phy-cells = <0>;
117 };
118
119 usbphynop3: usbphynop3 {
120 compatible = "usb-nop-xceiv";
121 clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
122 clock-names = "main_clk";
123 power-domains = <&pgc_hsic_phy>;
124 #phy-cells = <0>;
125 };
126
127 pmu {
128 compatible = "arm,cortex-a7-pmu";
129 interrupt-parent = <&gpc>;
130 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
131 interrupt-affinity = <&cpu0>;
132 };
133
134 replicator {
135 /*
136 * non-configurable replicators don't show up on the
137 * AMBA bus. As such no need to add "arm,primecell"
138 */
139 compatible = "arm,coresight-static-replicator";
140
141 out-ports {
142 #address-cells = <1>;
143 #size-cells = <0>;
144 /* replicator output ports */
145 port@0 {
146 reg = <0>;
147 replicator_out_port0: endpoint {
148 remote-endpoint = <&tpiu_in_port>;
149 };
150 };
151
152 port@1 {
153 reg = <1>;
154 replicator_out_port1: endpoint {
155 remote-endpoint = <&etr_in_port>;
156 };
157 };
158 };
159
160 in-ports {
161 port {
162 replicator_in_port0: endpoint {
163 remote-endpoint = <&etf_out_port>;
164 };
165 };
166 };
167 };
168
169 timer {
170 compatible = "arm,armv7-timer";
171 arm,cpu-registers-not-fw-configured;
172 interrupt-parent = <&intc>;
173 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
174 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
175 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
176 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
177 };
178
179 soc: soc {
180 #address-cells = <1>;
181 #size-cells = <1>;
182 compatible = "simple-bus";
183 interrupt-parent = <&gpc>;
184 ranges;
185
186 funnel@30041000 {
187 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
188 reg = <0x30041000 0x1000>;
189 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
190 clock-names = "apb_pclk";
191
192 ca_funnel_in_ports: in-ports {
193 port {
194 ca_funnel_in_port0: endpoint {
195 remote-endpoint = <&etm0_out_port>;
196 };
197 };
198
199 /* the other input ports are not connect to anything */
200 };
201
202 out-ports {
203 port {
204 ca_funnel_out_port0: endpoint {
205 remote-endpoint = <&hugo_funnel_in_port0>;
206 };
207 };
208
209 };
210 };
211
212 etm@3007c000 {
213 compatible = "arm,coresight-etm3x", "arm,primecell";
214 reg = <0x3007c000 0x1000>;
215 cpu = <&cpu0>;
216 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
217 clock-names = "apb_pclk";
218
219 out-ports {
220 port {
221 etm0_out_port: endpoint {
222 remote-endpoint = <&ca_funnel_in_port0>;
223 };
224 };
225 };
226 };
227
228 funnel@30083000 {
229 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
230 reg = <0x30083000 0x1000>;
231 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
232 clock-names = "apb_pclk";
233
234 in-ports {
235 #address-cells = <1>;
236 #size-cells = <0>;
237
238 port@0 {
239 reg = <0>;
240 hugo_funnel_in_port0: endpoint {
241 remote-endpoint = <&ca_funnel_out_port0>;
242 };
243 };
244
245 port@1 {
246 reg = <1>;
247 hugo_funnel_in_port1: endpoint {
248 /* M4 input */
249 };
250 };
251 /* the other input ports are not connect to anything */
252 };
253
254 out-ports {
255 port {
256 hugo_funnel_out_port0: endpoint {
257 remote-endpoint = <&etf_in_port>;
258 };
259 };
260 };
261 };
262
263 etf@30084000 {
264 compatible = "arm,coresight-tmc", "arm,primecell";
265 reg = <0x30084000 0x1000>;
266 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
267 clock-names = "apb_pclk";
268
269 in-ports {
270 port {
271 etf_in_port: endpoint {
272 remote-endpoint = <&hugo_funnel_out_port0>;
273 };
274 };
275 };
276
277 out-ports {
278 port {
279 etf_out_port: endpoint {
280 remote-endpoint = <&replicator_in_port0>;
281 };
282 };
283 };
284 };
285
286 etr@30086000 {
287 compatible = "arm,coresight-tmc", "arm,primecell";
288 reg = <0x30086000 0x1000>;
289 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
290 clock-names = "apb_pclk";
291
292 in-ports {
293 port {
294 etr_in_port: endpoint {
295 remote-endpoint = <&replicator_out_port1>;
296 };
297 };
298 };
299 };
300
301 tpiu@30087000 {
302 compatible = "arm,coresight-tpiu", "arm,primecell";
303 reg = <0x30087000 0x1000>;
304 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
305 clock-names = "apb_pclk";
306
307 in-ports {
308 port {
309 tpiu_in_port: endpoint {
310 remote-endpoint = <&replicator_out_port0>;
311 };
312 };
313 };
314 };
315
316 intc: interrupt-controller@31001000 {
317 compatible = "arm,cortex-a7-gic";
318 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
319 #interrupt-cells = <3>;
320 interrupt-controller;
321 interrupt-parent = <&intc>;
322 reg = <0x31001000 0x1000>,
323 <0x31002000 0x2000>,
324 <0x31004000 0x2000>,
325 <0x31006000 0x2000>;
326 };
327
328 aips1: bus@30000000 {
329 compatible = "fsl,aips-bus", "simple-bus";
330 #address-cells = <1>;
331 #size-cells = <1>;
332 reg = <0x30000000 0x400000>;
333 ranges;
334
335 gpio1: gpio@30200000 {
336 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
337 reg = <0x30200000 0x10000>;
338 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
339 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
340 gpio-controller;
341 #gpio-cells = <2>;
342 interrupt-controller;
343 #interrupt-cells = <2>;
344 gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
345 };
346
347 gpio2: gpio@30210000 {
348 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
349 reg = <0x30210000 0x10000>;
350 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
351 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
352 gpio-controller;
353 #gpio-cells = <2>;
354 interrupt-controller;
355 #interrupt-cells = <2>;
356 gpio-ranges = <&iomuxc 0 13 32>;
357 };
358
359 gpio3: gpio@30220000 {
360 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
361 reg = <0x30220000 0x10000>;
362 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
363 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
364 gpio-controller;
365 #gpio-cells = <2>;
366 interrupt-controller;
367 #interrupt-cells = <2>;
368 gpio-ranges = <&iomuxc 0 45 29>;
369 };
370
371 gpio4: gpio@30230000 {
372 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
373 reg = <0x30230000 0x10000>;
374 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
375 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
376 gpio-controller;
377 #gpio-cells = <2>;
378 interrupt-controller;
379 #interrupt-cells = <2>;
380 gpio-ranges = <&iomuxc 0 74 24>;
381 };
382
383 gpio5: gpio@30240000 {
384 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
385 reg = <0x30240000 0x10000>;
386 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
387 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
388 gpio-controller;
389 #gpio-cells = <2>;
390 interrupt-controller;
391 #interrupt-cells = <2>;
392 gpio-ranges = <&iomuxc 0 98 18>;
393 };
394
395 gpio6: gpio@30250000 {
396 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
397 reg = <0x30250000 0x10000>;
398 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
399 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
400 gpio-controller;
401 #gpio-cells = <2>;
402 interrupt-controller;
403 #interrupt-cells = <2>;
404 gpio-ranges = <&iomuxc 0 116 23>;
405 };
406
407 gpio7: gpio@30260000 {
408 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
409 reg = <0x30260000 0x10000>;
410 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
411 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
412 gpio-controller;
413 #gpio-cells = <2>;
414 interrupt-controller;
415 #interrupt-cells = <2>;
416 gpio-ranges = <&iomuxc 0 139 16>;
417 };
418
419 wdog1: watchdog@30280000 {
420 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
421 reg = <0x30280000 0x10000>;
422 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
423 clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
424 };
425
426 wdog2: watchdog@30290000 {
427 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
428 reg = <0x30290000 0x10000>;
429 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
430 clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
431 status = "disabled";
432 };
433
434 wdog3: watchdog@302a0000 {
435 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
436 reg = <0x302a0000 0x10000>;
437 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
438 clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
439 status = "disabled";
440 };
441
442 wdog4: watchdog@302b0000 {
443 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
444 reg = <0x302b0000 0x10000>;
445 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
446 clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
447 status = "disabled";
448 };
449
450 iomuxc_lpsr: pinctrl@302c0000 {
451 compatible = "fsl,imx7d-iomuxc-lpsr";
452 reg = <0x302c0000 0x10000>;
453 fsl,input-sel = <&iomuxc>;
454 };
455
456 gpt1: timer@302d0000 {
457 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
458 reg = <0x302d0000 0x10000>;
459 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
460 clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
461 <&clks IMX7D_GPT1_ROOT_CLK>;
462 clock-names = "ipg", "per";
463 };
464
465 gpt2: timer@302e0000 {
466 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
467 reg = <0x302e0000 0x10000>;
468 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
469 clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
470 <&clks IMX7D_GPT2_ROOT_CLK>;
471 clock-names = "ipg", "per";
472 status = "disabled";
473 };
474
475 gpt3: timer@302f0000 {
476 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
477 reg = <0x302f0000 0x10000>;
478 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
479 clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
480 <&clks IMX7D_GPT3_ROOT_CLK>;
481 clock-names = "ipg", "per";
482 status = "disabled";
483 };
484
485 gpt4: timer@30300000 {
486 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
487 reg = <0x30300000 0x10000>;
488 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
489 clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
490 <&clks IMX7D_GPT4_ROOT_CLK>;
491 clock-names = "ipg", "per";
492 status = "disabled";
493 };
494
495 kpp: keypad@30320000 {
496 compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
497 reg = <0x30320000 0x10000>;
498 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
499 clocks = <&clks IMX7D_KPP_ROOT_CLK>;
500 status = "disabled";
501 };
502
503 iomuxc: pinctrl@30330000 {
504 compatible = "fsl,imx7d-iomuxc";
505 reg = <0x30330000 0x10000>;
506 };
507
508 gpr: iomuxc-gpr@30340000 {
509 compatible = "fsl,imx7d-iomuxc-gpr",
510 "fsl,imx6q-iomuxc-gpr", "syscon",
511 "simple-mfd";
512 reg = <0x30340000 0x10000>;
513
514 mux: mux-controller {
515 compatible = "mmio-mux";
516 #mux-control-cells = <0>;
517 mux-reg-masks = <0x14 0x00000010>;
518 };
519
520 video_mux: csi-mux {
521 compatible = "video-mux";
522 mux-controls = <&mux 0>;
523 #address-cells = <1>;
524 #size-cells = <0>;
525 status = "disabled";
526
527 port@0 {
528 reg = <0>;
529 };
530
531 port@1 {
532 reg = <1>;
533
534 csi_mux_from_mipi_vc0: endpoint {
535 remote-endpoint = <&mipi_vc0_to_csi_mux>;
536 };
537 };
538
539 port@2 {
540 reg = <2>;
541
542 csi_mux_to_csi: endpoint {
543 remote-endpoint = <&csi_from_csi_mux>;
544 };
545 };
546 };
547 };
548
549 ocotp: efuse@30350000 {
550 #address-cells = <1>;
551 #size-cells = <1>;
552 compatible = "fsl,imx7d-ocotp", "syscon";
553 reg = <0x30350000 0x10000>;
554 clocks = <&clks IMX7D_OCOTP_CLK>;
555
556 tempmon_calib: calib@3c {
557 reg = <0x3c 0x4>;
558 };
559
560 fuse_grade: fuse-grade@10 {
561 reg = <0x10 0x4>;
562 };
563 };
564
565 anatop: anatop@30360000 {
566 compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
567 "syscon", "simple-mfd";
568 reg = <0x30360000 0x10000>;
569 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
570 <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
571
572 reg_1p0d: regulator-vdd1p0d {
573 compatible = "fsl,anatop-regulator";
574 regulator-name = "vdd1p0d";
575 regulator-min-microvolt = <800000>;
576 regulator-max-microvolt = <1200000>;
577 anatop-reg-offset = <0x210>;
578 anatop-vol-bit-shift = <8>;
579 anatop-vol-bit-width = <5>;
580 anatop-min-bit-val = <8>;
581 anatop-min-voltage = <800000>;
582 anatop-max-voltage = <1200000>;
583 anatop-enable-bit = <0>;
584 };
585
586 reg_1p2: regulator-vdd1p2 {
587 compatible = "fsl,anatop-regulator";
588 regulator-name = "vdd1p2";
589 regulator-min-microvolt = <1100000>;
590 regulator-max-microvolt = <1300000>;
591 anatop-reg-offset = <0x220>;
592 anatop-vol-bit-shift = <8>;
593 anatop-vol-bit-width = <5>;
594 anatop-min-bit-val = <0x14>;
595 anatop-min-voltage = <1100000>;
596 anatop-max-voltage = <1300000>;
597 anatop-enable-bit = <0>;
598 };
599
600 tempmon: tempmon {
601 compatible = "fsl,imx7d-tempmon";
602 interrupt-parent = <&gpc>;
603 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
604 fsl,tempmon = <&anatop>;
605 nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
606 nvmem-cell-names = "calib", "temp_grade";
607 clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
608 };
609 };
610
611 snvs: snvs@30370000 {
612 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
613 reg = <0x30370000 0x10000>;
614
615 snvs_rtc: snvs-rtc-lp {
616 compatible = "fsl,sec-v4.0-mon-rtc-lp";
617 regmap = <&snvs>;
618 offset = <0x34>;
619 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
620 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
621 clocks = <&clks IMX7D_SNVS_CLK>;
622 clock-names = "snvs-rtc";
623 };
624
625 snvs_pwrkey: snvs-powerkey {
626 compatible = "fsl,sec-v4.0-pwrkey";
627 regmap = <&snvs>;
628 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
629 clocks = <&clks IMX7D_SNVS_CLK>;
630 clock-names = "snvs-pwrkey";
631 linux,keycode = <KEY_POWER>;
632 wakeup-source;
633 status = "disabled";
634 };
635 };
636
637 clks: clock-controller@30380000 {
638 compatible = "fsl,imx7d-ccm";
639 reg = <0x30380000 0x10000>;
640 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
641 <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
642 #clock-cells = <1>;
643 clocks = <&ckil>, <&osc>;
644 clock-names = "ckil", "osc";
645 };
646
647 src: reset-controller@30390000 {
648 compatible = "fsl,imx7d-src", "syscon";
649 reg = <0x30390000 0x10000>;
650 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
651 #reset-cells = <1>;
652 };
653
654 gpc: gpc@303a0000 {
655 compatible = "fsl,imx7d-gpc";
656 reg = <0x303a0000 0x10000>;
657 interrupt-controller;
658 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
659 #interrupt-cells = <3>;
660 interrupt-parent = <&intc>;
661 #power-domain-cells = <1>;
662
663 pgc {
664 #address-cells = <1>;
665 #size-cells = <0>;
666
667 pgc_mipi_phy: power-domain@0 {
668 #power-domain-cells = <0>;
669 reg = <0>;
670 power-supply = <®_1p0d>;
671 };
672
673 pgc_pcie_phy: power-domain@1 {
674 #power-domain-cells = <0>;
675 reg = <1>;
676 power-supply = <®_1p0d>;
677 };
678
679 pgc_hsic_phy: power-domain@2 {
680 #power-domain-cells = <0>;
681 reg = <2>;
682 power-supply = <®_1p2>;
683 };
684 };
685 };
686 };
687
688 aips2: bus@30400000 {
689 compatible = "fsl,aips-bus", "simple-bus";
690 #address-cells = <1>;
691 #size-cells = <1>;
692 reg = <0x30400000 0x400000>;
693 ranges;
694
695 adc1: adc@30610000 {
696 compatible = "fsl,imx7d-adc";
697 reg = <0x30610000 0x10000>;
698 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
699 clocks = <&clks IMX7D_ADC_ROOT_CLK>;
700 clock-names = "adc";
701 #io-channel-cells = <1>;
702 status = "disabled";
703 };
704
705 adc2: adc@30620000 {
706 compatible = "fsl,imx7d-adc";
707 reg = <0x30620000 0x10000>;
708 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
709 clocks = <&clks IMX7D_ADC_ROOT_CLK>;
710 clock-names = "adc";
711 #io-channel-cells = <1>;
712 status = "disabled";
713 };
714
715 ecspi4: spi@30630000 {
716 #address-cells = <1>;
717 #size-cells = <0>;
718 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
719 reg = <0x30630000 0x10000>;
720 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
721 clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
722 <&clks IMX7D_ECSPI4_ROOT_CLK>;
723 clock-names = "ipg", "per";
724 status = "disabled";
725 };
726
727 ftm1: pwm@30640000 {
728 compatible = "fsl,vf610-ftm-pwm";
729 reg = <0x30640000 0x10000>;
730 #pwm-cells = <3>;
731 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
732 clock-names = "ftm_sys", "ftm_ext",
733 "ftm_fix", "ftm_cnt_clk_en";
734 clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
735 <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
736 <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
737 <&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
738 status = "disabled";
739 };
740
741 ftm2: pwm@30650000 {
742 compatible = "fsl,vf610-ftm-pwm";
743 reg = <0x30650000 0x10000>;
744 #pwm-cells = <3>;
745 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
746 clock-names = "ftm_sys", "ftm_ext",
747 "ftm_fix", "ftm_cnt_clk_en";
748 clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
749 <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
750 <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
751 <&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
752 status = "disabled";
753 };
754
755 pwm1: pwm@30660000 {
756 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
757 reg = <0x30660000 0x10000>;
758 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
759 clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
760 <&clks IMX7D_PWM1_ROOT_CLK>;
761 clock-names = "ipg", "per";
762 #pwm-cells = <3>;
763 status = "disabled";
764 };
765
766 pwm2: pwm@30670000 {
767 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
768 reg = <0x30670000 0x10000>;
769 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
770 clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
771 <&clks IMX7D_PWM2_ROOT_CLK>;
772 clock-names = "ipg", "per";
773 #pwm-cells = <3>;
774 status = "disabled";
775 };
776
777 pwm3: pwm@30680000 {
778 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
779 reg = <0x30680000 0x10000>;
780 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
781 clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
782 <&clks IMX7D_PWM3_ROOT_CLK>;
783 clock-names = "ipg", "per";
784 #pwm-cells = <3>;
785 status = "disabled";
786 };
787
788 pwm4: pwm@30690000 {
789 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
790 reg = <0x30690000 0x10000>;
791 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
792 clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
793 <&clks IMX7D_PWM4_ROOT_CLK>;
794 clock-names = "ipg", "per";
795 #pwm-cells = <3>;
796 status = "disabled";
797 };
798
799 csi: csi@30710000 {
800 compatible = "fsl,imx7-csi";
801 reg = <0x30710000 0x10000>;
802 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
803 clocks = <&clks IMX7D_CLK_DUMMY>,
804 <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
805 <&clks IMX7D_CLK_DUMMY>;
806 clock-names = "axi", "mclk", "dcic";
807 status = "disabled";
808
809 port {
810 csi_from_csi_mux: endpoint {
811 remote-endpoint = <&csi_mux_to_csi>;
812 };
813 };
814 };
815
816 lcdif: lcdif@30730000 {
817 compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
818 reg = <0x30730000 0x10000>;
819 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
820 clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
821 <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
822 clock-names = "pix", "axi";
823 status = "disabled";
824 };
825
826 mipi_csi: mipi-csi@30750000 {
827 compatible = "fsl,imx7-mipi-csi2";
828 reg = <0x30750000 0x10000>;
829 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
830 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
831 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
832 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
833 clock-names = "pclk", "wrap", "phy";
834 power-domains = <&pgc_mipi_phy>;
835 phy-supply = <®_1p0d>;
836 resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
837 status = "disabled";
838
839 ports {
840 #address-cells = <1>;
841 #size-cells = <0>;
842
843 port@0 {
844 reg = <0>;
845 };
846
847 port@1 {
848 reg = <1>;
849
850 mipi_vc0_to_csi_mux: endpoint {
851 remote-endpoint = <&csi_mux_from_mipi_vc0>;
852 };
853 };
854 };
855 };
856 };
857
858 aips3: bus@30800000 {
859 compatible = "fsl,aips-bus", "simple-bus";
860 #address-cells = <1>;
861 #size-cells = <1>;
862 reg = <0x30800000 0x400000>;
863 ranges;
864
865 spba-bus@30800000 {
866 compatible = "fsl,spba-bus", "simple-bus";
867 #address-cells = <1>;
868 #size-cells = <1>;
869 reg = <0x30800000 0x100000>;
870 ranges;
871
872 ecspi1: spi@30820000 {
873 #address-cells = <1>;
874 #size-cells = <0>;
875 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
876 reg = <0x30820000 0x10000>;
877 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
878 clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
879 <&clks IMX7D_ECSPI1_ROOT_CLK>;
880 clock-names = "ipg", "per";
881 status = "disabled";
882 };
883
884 ecspi2: spi@30830000 {
885 #address-cells = <1>;
886 #size-cells = <0>;
887 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
888 reg = <0x30830000 0x10000>;
889 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
890 clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
891 <&clks IMX7D_ECSPI2_ROOT_CLK>;
892 clock-names = "ipg", "per";
893 status = "disabled";
894 };
895
896 ecspi3: spi@30840000 {
897 #address-cells = <1>;
898 #size-cells = <0>;
899 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
900 reg = <0x30840000 0x10000>;
901 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
902 clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
903 <&clks IMX7D_ECSPI3_ROOT_CLK>;
904 clock-names = "ipg", "per";
905 status = "disabled";
906 };
907
908 uart1: serial@30860000 {
909 compatible = "fsl,imx7d-uart",
910 "fsl,imx6q-uart";
911 reg = <0x30860000 0x10000>;
912 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
913 clocks = <&clks IMX7D_UART1_ROOT_CLK>,
914 <&clks IMX7D_UART1_ROOT_CLK>;
915 clock-names = "ipg", "per";
916 status = "disabled";
917 };
918
919 uart2: serial@30890000 {
920 compatible = "fsl,imx7d-uart",
921 "fsl,imx6q-uart";
922 reg = <0x30890000 0x10000>;
923 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
924 clocks = <&clks IMX7D_UART2_ROOT_CLK>,
925 <&clks IMX7D_UART2_ROOT_CLK>;
926 clock-names = "ipg", "per";
927 status = "disabled";
928 };
929
930 uart3: serial@30880000 {
931 compatible = "fsl,imx7d-uart",
932 "fsl,imx6q-uart";
933 reg = <0x30880000 0x10000>;
934 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
935 clocks = <&clks IMX7D_UART3_ROOT_CLK>,
936 <&clks IMX7D_UART3_ROOT_CLK>;
937 clock-names = "ipg", "per";
938 status = "disabled";
939 };
940
941 sai1: sai@308a0000 {
942 #sound-dai-cells = <0>;
943 compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
944 reg = <0x308a0000 0x10000>;
945 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
946 clocks = <&clks IMX7D_SAI1_IPG_CLK>,
947 <&clks IMX7D_SAI1_ROOT_CLK>,
948 <&clks IMX7D_CLK_DUMMY>,
949 <&clks IMX7D_CLK_DUMMY>;
950 clock-names = "bus", "mclk1", "mclk2", "mclk3";
951 dma-names = "rx", "tx";
952 dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
953 status = "disabled";
954 };
955
956 sai2: sai@308b0000 {
957 #sound-dai-cells = <0>;
958 compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
959 reg = <0x308b0000 0x10000>;
960 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
961 clocks = <&clks IMX7D_SAI2_IPG_CLK>,
962 <&clks IMX7D_SAI2_ROOT_CLK>,
963 <&clks IMX7D_CLK_DUMMY>,
964 <&clks IMX7D_CLK_DUMMY>;
965 clock-names = "bus", "mclk1", "mclk2", "mclk3";
966 dma-names = "rx", "tx";
967 dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
968 status = "disabled";
969 };
970
971 sai3: sai@308c0000 {
972 #sound-dai-cells = <0>;
973 compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
974 reg = <0x308c0000 0x10000>;
975 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
976 clocks = <&clks IMX7D_SAI3_IPG_CLK>,
977 <&clks IMX7D_SAI3_ROOT_CLK>,
978 <&clks IMX7D_CLK_DUMMY>,
979 <&clks IMX7D_CLK_DUMMY>;
980 clock-names = "bus", "mclk1", "mclk2", "mclk3";
981 dma-names = "rx", "tx";
982 dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
983 status = "disabled";
984 };
985 };
986
987 crypto: crypto@30900000 {
988 compatible = "fsl,sec-v4.0";
989 #address-cells = <1>;
990 #size-cells = <1>;
991 reg = <0x30900000 0x40000>;
992 ranges = <0 0x30900000 0x40000>;
993 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
994 clocks = <&clks IMX7D_CAAM_CLK>,
995 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
996 clock-names = "ipg", "aclk";
997
998 sec_jr0: jr@1000 {
999 compatible = "fsl,sec-v4.0-job-ring";
1000 reg = <0x1000 0x1000>;
1001 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1002 };
1003
1004 sec_jr1: jr@2000 {
1005 compatible = "fsl,sec-v4.0-job-ring";
1006 reg = <0x2000 0x1000>;
1007 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
1008 };
1009
1010 sec_jr2: jr@3000 {
1011 compatible = "fsl,sec-v4.0-job-ring";
1012 reg = <0x3000 0x1000>;
1013 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
1014 };
1015 };
1016
1017 flexcan1: can@30a00000 {
1018 compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
1019 reg = <0x30a00000 0x10000>;
1020 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
1021 clocks = <&clks IMX7D_CLK_DUMMY>,
1022 <&clks IMX7D_CAN1_ROOT_CLK>;
1023 clock-names = "ipg", "per";
1024 fsl,stop-mode = <&gpr 0x10 1>;
1025 status = "disabled";
1026 };
1027
1028 flexcan2: can@30a10000 {
1029 compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
1030 reg = <0x30a10000 0x10000>;
1031 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
1032 clocks = <&clks IMX7D_CLK_DUMMY>,
1033 <&clks IMX7D_CAN2_ROOT_CLK>;
1034 clock-names = "ipg", "per";
1035 fsl,stop-mode = <&gpr 0x10 2>;
1036 status = "disabled";
1037 };
1038
1039 i2c1: i2c@30a20000 {
1040 #address-cells = <1>;
1041 #size-cells = <0>;
1042 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1043 reg = <0x30a20000 0x10000>;
1044 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1045 clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
1046 status = "disabled";
1047 };
1048
1049 i2c2: i2c@30a30000 {
1050 #address-cells = <1>;
1051 #size-cells = <0>;
1052 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1053 reg = <0x30a30000 0x10000>;
1054 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
1055 clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
1056 status = "disabled";
1057 };
1058
1059 i2c3: i2c@30a40000 {
1060 #address-cells = <1>;
1061 #size-cells = <0>;
1062 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1063 reg = <0x30a40000 0x10000>;
1064 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1065 clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
1066 status = "disabled";
1067 };
1068
1069 i2c4: i2c@30a50000 {
1070 #address-cells = <1>;
1071 #size-cells = <0>;
1072 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1073 reg = <0x30a50000 0x10000>;
1074 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1075 clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
1076 status = "disabled";
1077 };
1078
1079 uart4: serial@30a60000 {
1080 compatible = "fsl,imx7d-uart",
1081 "fsl,imx6q-uart";
1082 reg = <0x30a60000 0x10000>;
1083 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1084 clocks = <&clks IMX7D_UART4_ROOT_CLK>,
1085 <&clks IMX7D_UART4_ROOT_CLK>;
1086 clock-names = "ipg", "per";
1087 status = "disabled";
1088 };
1089
1090 uart5: serial@30a70000 {
1091 compatible = "fsl,imx7d-uart",
1092 "fsl,imx6q-uart";
1093 reg = <0x30a70000 0x10000>;
1094 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1095 clocks = <&clks IMX7D_UART5_ROOT_CLK>,
1096 <&clks IMX7D_UART5_ROOT_CLK>;
1097 clock-names = "ipg", "per";
1098 status = "disabled";
1099 };
1100
1101 uart6: serial@30a80000 {
1102 compatible = "fsl,imx7d-uart",
1103 "fsl,imx6q-uart";
1104 reg = <0x30a80000 0x10000>;
1105 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1106 clocks = <&clks IMX7D_UART6_ROOT_CLK>,
1107 <&clks IMX7D_UART6_ROOT_CLK>;
1108 clock-names = "ipg", "per";
1109 status = "disabled";
1110 };
1111
1112 uart7: serial@30a90000 {
1113 compatible = "fsl,imx7d-uart",
1114 "fsl,imx6q-uart";
1115 reg = <0x30a90000 0x10000>;
1116 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
1117 clocks = <&clks IMX7D_UART7_ROOT_CLK>,
1118 <&clks IMX7D_UART7_ROOT_CLK>;
1119 clock-names = "ipg", "per";
1120 status = "disabled";
1121 };
1122
1123 mu0a: mailbox@30aa0000 {
1124 compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
1125 reg = <0x30aa0000 0x10000>;
1126 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1127 clocks = <&clks IMX7D_MU_ROOT_CLK>;
1128 #mbox-cells = <2>;
1129 status = "disabled";
1130 };
1131
1132 mu0b: mailbox@30ab0000 {
1133 compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
1134 reg = <0x30ab0000 0x10000>;
1135 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1136 clocks = <&clks IMX7D_MU_ROOT_CLK>;
1137 #mbox-cells = <2>;
1138 fsl,mu-side-b;
1139 status = "disabled";
1140 };
1141
1142 usbotg1: usb@30b10000 {
1143 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
1144 reg = <0x30b10000 0x200>;
1145 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1146 clocks = <&clks IMX7D_USB_CTRL_CLK>;
1147 fsl,usbphy = <&usbphynop1>;
1148 fsl,usbmisc = <&usbmisc1 0>;
1149 phy-clkgate-delay-us = <400>;
1150 status = "disabled";
1151 };
1152
1153 usbh: usb@30b30000 {
1154 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
1155 reg = <0x30b30000 0x200>;
1156 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1157 clocks = <&clks IMX7D_USB_CTRL_CLK>;
1158 fsl,usbphy = <&usbphynop3>;
1159 fsl,usbmisc = <&usbmisc3 0>;
1160 phy_type = "hsic";
1161 dr_mode = "host";
1162 phy-clkgate-delay-us = <400>;
1163 status = "disabled";
1164 };
1165
1166 usbmisc1: usbmisc@30b10200 {
1167 #index-cells = <1>;
1168 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
1169 reg = <0x30b10200 0x200>;
1170 };
1171
1172 usbmisc3: usbmisc@30b30200 {
1173 #index-cells = <1>;
1174 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
1175 reg = <0x30b30200 0x200>;
1176 };
1177
1178 usdhc1: mmc@30b40000 {
1179 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
1180 reg = <0x30b40000 0x10000>;
1181 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
1182 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1183 <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
1184 <&clks IMX7D_USDHC1_ROOT_CLK>;
1185 clock-names = "ipg", "ahb", "per";
1186 bus-width = <4>;
1187 status = "disabled";
1188 };
1189
1190 usdhc2: mmc@30b50000 {
1191 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
1192 reg = <0x30b50000 0x10000>;
1193 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1194 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1195 <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
1196 <&clks IMX7D_USDHC2_ROOT_CLK>;
1197 clock-names = "ipg", "ahb", "per";
1198 bus-width = <4>;
1199 status = "disabled";
1200 };
1201
1202 usdhc3: mmc@30b60000 {
1203 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
1204 reg = <0x30b60000 0x10000>;
1205 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
1206 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1207 <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
1208 <&clks IMX7D_USDHC3_ROOT_CLK>;
1209 clock-names = "ipg", "ahb", "per";
1210 bus-width = <4>;
1211 status = "disabled";
1212 };
1213
1214 qspi: spi@30bb0000 {
1215 compatible = "fsl,imx7d-qspi";
1216 reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
1217 reg-names = "QuadSPI", "QuadSPI-memory";
1218 #address-cells = <1>;
1219 #size-cells = <0>;
1220 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1221 clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
1222 <&clks IMX7D_QSPI_ROOT_CLK>;
1223 clock-names = "qspi_en", "qspi";
1224 status = "disabled";
1225 };
1226
1227 sdma: dma-controller@30bd0000 {
1228 compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
1229 reg = <0x30bd0000 0x10000>;
1230 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1231 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1232 <&clks IMX7D_SDMA_CORE_CLK>;
1233 clock-names = "ipg", "ahb";
1234 #dma-cells = <3>;
1235 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1236 };
1237
1238 fec1: ethernet@30be0000 {
1239 compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
1240 reg = <0x30be0000 0x10000>;
1241 interrupt-names = "int0", "int1", "int2", "pps";
1242 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1243 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1244 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1245 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1246 clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>,
1247 <&clks IMX7D_ENET_AXI_ROOT_CLK>,
1248 <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
1249 <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
1250 <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
1251 clock-names = "ipg", "ahb", "ptp",
1252 "enet_clk_ref", "enet_out";
1253 fsl,num-tx-queues = <3>;
1254 fsl,num-rx-queues = <3>;
1255 fsl,stop-mode = <&gpr 0x10 3>;
1256 status = "disabled";
1257 };
1258 };
1259
1260 dma_apbh: dma-apbh@33000000 {
1261 compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1262 reg = <0x33000000 0x2000>;
1263 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1264 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1265 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1266 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1267 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
1268 #dma-cells = <1>;
1269 dma-channels = <4>;
1270 clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
1271 };
1272
1273 gpmi: nand-controller@33002000{
1274 compatible = "fsl,imx7d-gpmi-nand";
1275 #address-cells = <1>;
1276 #size-cells = <1>;
1277 reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1278 reg-names = "gpmi-nand", "bch";
1279 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1280 interrupt-names = "bch";
1281 clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
1282 <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
1283 clock-names = "gpmi_io", "gpmi_bch_apb";
1284 dmas = <&dma_apbh 0>;
1285 dma-names = "rx-tx";
1286 status = "disabled";
1287 assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
1288 assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
1289 };
1290 };
1291};