1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Author: Tom Brautaset <tbrautaset@gmail.com>
  4 */
  5
  6/dts-v1/;
  7
  8#include "bcm47094.dtsi"
  9#include "bcm5301x-nand-cs0-bch8.dtsi"
 10
 11#include <dt-bindings/leds/common.h>
 12
 13/ {
 14	compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
 15	model = "ASUS RT-AC5300";
 16
 17	memory@0 {
 18		reg = <0x00000000 0x08000000>,
 19		      <0x88000000 0x18000000>;
 20		device_type = "memory";
 21	};
 22
 23	nvram@1c080000 {
 24		compatible = "brcm,nvram";
 25		reg = <0x1c080000 0x00180000>;
 26
 27		et1macaddr: et1macaddr {
 28			#nvmem-cell-cells = <1>;
 29		};
 30	};
 31
 32	gpio-keys {
 33		compatible = "gpio-keys";
 34
 35		button-reset {
 36			label = "Reset";
 37			linux,code = <KEY_RESTART>;
 38			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 39		};
 40
 41		button-wifi {
 42			label = "Wi-Fi";
 43			linux,code = <KEY_RFKILL>;
 44			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 45		};
 46
 47		button-wps {
 48			label = "WPS";
 49			linux,code = <KEY_WPS_BUTTON>;
 50			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 51		};
 52	};
 53
 54	leds {
 55		compatible = "gpio-leds";
 56
 57		led-lan {
 58			color = <LED_COLOR_ID_WHITE>;
 59			function = LED_FUNCTION_LAN;
 60			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
 61		};
 62
 63		led-power {
 64			color = <LED_COLOR_ID_WHITE>;
 65			function = LED_FUNCTION_POWER;
 66			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 67			linux,default-trigger = "default-on";
 68		};
 69
 70		led-wan-red {
 71			color = <LED_COLOR_ID_RED>;
 72			function = LED_FUNCTION_WAN;
 73			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 74		};
 75
 76		led-wps {
 77			color = <LED_COLOR_ID_WHITE>;
 78			function = LED_FUNCTION_WPS;
 79			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 80		};
 81	};
 82};
 83
 84&gmac0 {
 85	nvmem-cells = <&et1macaddr 0>;
 86	nvmem-cell-names = "mac-address";
 87};
 88
 89&gmac1 {
 90	nvmem-cells = <&et1macaddr 1>;
 91	nvmem-cell-names = "mac-address";
 92};
 93
 94&gmac2 {
 95	nvmem-cells = <&et1macaddr 2>;
 96	nvmem-cell-names = "mac-address";
 97};
 98
 99&nandcs {
100	partitions {
101		compatible = "fixed-partitions";
102		#address-cells = <1>;
103		#size-cells = <1>;
104
105		partition@0 {
106			reg = <0x00000000 0x00080000>;
107			label = "boot";
108			read-only;
109		};
110
111		partition@80000 {
112			reg = <0x00080000 0x00180000>;
113			label = "nvram";
114		};
115
116		partition@200000 {
117			compatible = "brcm,trx";
118			reg = <0x00200000 0x07e00000>;
119			label = "firmware";
120		};
121	};
122};
123
124&srab {
125	status = "okay";
126
127	ports {
128		port@0 {
129			label = "lan4";
130		};
131
132		port@1 {
133			label = "lan3";
134		};
135
136		port@2 {
137			label = "lan2";
138		};
139
140		port@3 {
141			label = "lan1";
142		};
143
144		port@4 {
145			label = "wan";
146		};
147	};
148};
149
150&usb2 {
151	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
152};
153
154&usb3_phy {
155	status = "okay";
156};