Linux Audio

Check our new training course

Linux debugging, profiling, tracing and performance analysis training

Mar 24-27, 2025, special US time zones
Register
Loading...
Note: File does not exist in v6.2.
   1/*
   2 * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
   3 * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
   4 *
   5 * This file is dual-licensed: you can use it either under the terms
   6 * of the GPL or the X11 license, at your option. Note that this dual
   7 * licensing only applies to this file, and not this project as a
   8 * whole.
   9 *
  10 *  a) This file is free software; you can redistribute it and/or
  11 *     modify it under the terms of the GNU General Public License as
  12 *     published by the Free Software Foundation; either version 2 of the
  13 *     License, or (at your option) any later version.
  14 *
  15 *     This file is distributed in the hope that it will be useful,
  16 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 *     GNU General Public License for more details.
  19 *
  20 * Or, alternatively,
  21 *
  22 *  b) Permission is hereby granted, free of charge, to any person
  23 *     obtaining a copy of this software and associated documentation
  24 *     files (the "Software"), to deal in the Software without
  25 *     restriction, including without limitation the rights to use,
  26 *     copy, modify, merge, publish, distribute, sublicense, and/or
  27 *     sell copies of the Software, and to permit persons to whom the
  28 *     Software is furnished to do so, subject to the following
  29 *     conditions:
  30 *
  31 *     The above copyright notice and this permission notice shall be
  32 *     included in all copies or substantial portions of the Software.
  33 *
  34 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41 *     OTHER DEALINGS IN THE SOFTWARE.
  42 */
  43
  44#include <dt-bindings/interrupt-controller/arm-gic.h>
  45#include <dt-bindings/clock/sun6i-rtc.h>
  46#include <dt-bindings/clock/sun8i-de2.h>
  47#include <dt-bindings/clock/sun8i-r40-ccu.h>
  48#include <dt-bindings/clock/sun8i-tcon-top.h>
  49#include <dt-bindings/reset/sun8i-r40-ccu.h>
  50#include <dt-bindings/reset/sun8i-de2.h>
  51#include <dt-bindings/thermal/thermal.h>
  52
  53/ {
  54	#address-cells = <1>;
  55	#size-cells = <1>;
  56	interrupt-parent = <&gic>;
  57
  58	clocks {
  59		#address-cells = <1>;
  60		#size-cells = <1>;
  61		ranges;
  62
  63		osc24M: osc24M {
  64			#clock-cells = <0>;
  65			compatible = "fixed-clock";
  66			clock-frequency = <24000000>;
  67			clock-accuracy = <50000>;
  68			clock-output-names = "osc24M";
  69		};
  70
  71		osc32k: osc32k {
  72			#clock-cells = <0>;
  73			compatible = "fixed-clock";
  74			clock-frequency = <32768>;
  75			clock-accuracy = <20000>;
  76			clock-output-names = "ext-osc32k";
  77		};
  78	};
  79
  80	cpus {
  81		#address-cells = <1>;
  82		#size-cells = <0>;
  83
  84		cpu0: cpu@0 {
  85			compatible = "arm,cortex-a7";
  86			device_type = "cpu";
  87			reg = <0>;
  88			clocks = <&ccu CLK_CPU>;
  89			clock-names = "cpu";
  90			#cooling-cells = <2>;
  91		};
  92
  93		cpu1: cpu@1 {
  94			compatible = "arm,cortex-a7";
  95			device_type = "cpu";
  96			reg = <1>;
  97			clocks = <&ccu CLK_CPU>;
  98			clock-names = "cpu";
  99			#cooling-cells = <2>;
 100		};
 101
 102		cpu2: cpu@2 {
 103			compatible = "arm,cortex-a7";
 104			device_type = "cpu";
 105			reg = <2>;
 106			clocks = <&ccu CLK_CPU>;
 107			clock-names = "cpu";
 108			#cooling-cells = <2>;
 109		};
 110
 111		cpu3: cpu@3 {
 112			compatible = "arm,cortex-a7";
 113			device_type = "cpu";
 114			reg = <3>;
 115			clocks = <&ccu CLK_CPU>;
 116			clock-names = "cpu";
 117			#cooling-cells = <2>;
 118		};
 119	};
 120
 121	de: display-engine {
 122		compatible = "allwinner,sun8i-r40-display-engine";
 123		allwinner,pipelines = <&mixer0>, <&mixer1>;
 124		status = "disabled";
 125	};
 126
 127	thermal-zones {
 128		cpu_thermal: cpu0-thermal {
 129			/* milliseconds */
 130			polling-delay-passive = <0>;
 131			polling-delay = <0>;
 132			thermal-sensors = <&ths 0>;
 133
 134			trips {
 135				cpu_hot_trip: cpu-hot {
 136					temperature = <80000>;
 137					hysteresis = <2000>;
 138					type = "passive";
 139				};
 140
 141				cpu_very_hot_trip: cpu-very-hot {
 142					temperature = <115000>;
 143					hysteresis = <0>;
 144					type = "critical";
 145				};
 146			};
 147
 148			cooling-maps {
 149				cpu-hot-limit {
 150					trip = <&cpu_hot_trip>;
 151					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 152							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 153							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 154							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 155				};
 156			};
 157		};
 158
 159		gpu_thermal: gpu-thermal {
 160			/* milliseconds */
 161			polling-delay-passive = <0>;
 162			polling-delay = <0>;
 163			thermal-sensors = <&ths 1>;
 164		};
 165	};
 166
 167	soc {
 168		compatible = "simple-bus";
 169		#address-cells = <1>;
 170		#size-cells = <1>;
 171		ranges;
 172
 173		display_clocks: clock@1000000 {
 174			compatible = "allwinner,sun8i-r40-de2-clk",
 175				     "allwinner,sun8i-h3-de2-clk";
 176			reg = <0x01000000 0x10000>;
 177			clocks = <&ccu CLK_BUS_DE>,
 178				 <&ccu CLK_DE>;
 179			clock-names = "bus",
 180				      "mod";
 181			resets = <&ccu RST_BUS_DE>;
 182			#clock-cells = <1>;
 183			#reset-cells = <1>;
 184		};
 185
 186		mixer0: mixer@1100000 {
 187			compatible = "allwinner,sun8i-r40-de2-mixer-0";
 188			reg = <0x01100000 0x100000>;
 189			clocks = <&display_clocks CLK_BUS_MIXER0>,
 190				 <&display_clocks CLK_MIXER0>;
 191			clock-names = "bus",
 192				      "mod";
 193			resets = <&display_clocks RST_MIXER0>;
 194
 195			ports {
 196				#address-cells = <1>;
 197				#size-cells = <0>;
 198
 199				mixer0_out: port@1 {
 200					reg = <1>;
 201					mixer0_out_tcon_top: endpoint {
 202						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
 203					};
 204				};
 205			};
 206		};
 207
 208		mixer1: mixer@1200000 {
 209			compatible = "allwinner,sun8i-r40-de2-mixer-1";
 210			reg = <0x01200000 0x100000>;
 211			clocks = <&display_clocks CLK_BUS_MIXER1>,
 212				 <&display_clocks CLK_MIXER1>;
 213			clock-names = "bus",
 214				      "mod";
 215			resets = <&display_clocks RST_WB>;
 216
 217			ports {
 218				#address-cells = <1>;
 219				#size-cells = <0>;
 220
 221				mixer1_out: port@1 {
 222					reg = <1>;
 223					mixer1_out_tcon_top: endpoint {
 224						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
 225					};
 226				};
 227			};
 228		};
 229
 230		deinterlace: deinterlace@1400000 {
 231			compatible = "allwinner,sun8i-r40-deinterlace",
 232				     "allwinner,sun8i-h3-deinterlace";
 233			reg = <0x01400000 0x20000>;
 234			clocks = <&ccu CLK_BUS_DEINTERLACE>,
 235				 <&ccu CLK_DEINTERLACE>,
 236				 /*
 237				  * NOTE: Contrary to what datasheet claims,
 238				  * DRAM deinterlace gate doesn't exist and
 239				  * it's shared with CSI1.
 240				  */
 241				 <&ccu CLK_DRAM_CSI1>;
 242			clock-names = "bus", "mod", "ram";
 243			resets = <&ccu RST_BUS_DEINTERLACE>;
 244			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 245			interconnects = <&mbus 9>;
 246			interconnect-names = "dma-mem";
 247		};
 248
 249		syscon: system-control@1c00000 {
 250			compatible = "allwinner,sun8i-r40-system-control",
 251				     "allwinner,sun4i-a10-system-control";
 252			reg = <0x01c00000 0x30>;
 253			#address-cells = <1>;
 254			#size-cells = <1>;
 255			ranges;
 256
 257			sram_c: sram@1d00000 {
 258				compatible = "mmio-sram";
 259				reg = <0x01d00000 0xd0000>;
 260				#address-cells = <1>;
 261				#size-cells = <1>;
 262				ranges = <0 0x01d00000 0xd0000>;
 263
 264				ve_sram: sram-section@0 {
 265					compatible = "allwinner,sun8i-r40-sram-c1",
 266						     "allwinner,sun4i-a10-sram-c1";
 267					reg = <0x000000 0x80000>;
 268				};
 269			};
 270		};
 271
 272		nmi_intc: interrupt-controller@1c00030 {
 273			compatible = "allwinner,sun7i-a20-sc-nmi";
 274			interrupt-controller;
 275			#interrupt-cells = <2>;
 276			reg = <0x01c00030 0x0c>;
 277			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 278		};
 279
 280		dma: dma-controller@1c02000 {
 281			compatible = "allwinner,sun8i-r40-dma",
 282				     "allwinner,sun50i-a64-dma";
 283			reg = <0x01c02000 0x1000>;
 284			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 285			clocks = <&ccu CLK_BUS_DMA>;
 286			dma-channels = <16>;
 287			dma-requests = <31>;
 288			resets = <&ccu RST_BUS_DMA>;
 289			#dma-cells = <1>;
 290		};
 291
 292		spi0: spi@1c05000 {
 293			compatible = "allwinner,sun8i-r40-spi",
 294				     "allwinner,sun8i-h3-spi";
 295			reg = <0x01c05000 0x1000>;
 296			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 297			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 298			clock-names = "ahb", "mod";
 299			resets = <&ccu RST_BUS_SPI0>;
 300			status = "disabled";
 301			#address-cells = <1>;
 302			#size-cells = <0>;
 303		};
 304
 305		spi1: spi@1c06000 {
 306			compatible = "allwinner,sun8i-r40-spi",
 307				     "allwinner,sun8i-h3-spi";
 308			reg = <0x01c06000 0x1000>;
 309			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 310			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 311			clock-names = "ahb", "mod";
 312			resets = <&ccu RST_BUS_SPI1>;
 313			status = "disabled";
 314			#address-cells = <1>;
 315			#size-cells = <0>;
 316		};
 317
 318		csi0: csi@1c09000 {
 319			compatible = "allwinner,sun8i-r40-csi0",
 320				     "allwinner,sun7i-a20-csi0";
 321			reg = <0x01c09000 0x1000>;
 322			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 323			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
 324				 <&ccu CLK_DRAM_CSI0>;
 325			clock-names = "bus", "isp", "ram";
 326			resets = <&ccu RST_BUS_CSI0>;
 327			interconnects = <&mbus 5>;
 328			interconnect-names = "dma-mem";
 329			status = "disabled";
 330		};
 331
 332		video-codec@1c0e000 {
 333			compatible = "allwinner,sun8i-r40-video-engine";
 334			reg = <0x01c0e000 0x1000>;
 335			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
 336			<&ccu CLK_DRAM_VE>;
 337			clock-names = "ahb", "mod", "ram";
 338			resets = <&ccu RST_BUS_VE>;
 339			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 340			allwinner,sram = <&ve_sram 1>;
 341			interconnects = <&mbus 4>;
 342			interconnect-names = "dma-mem";
 343		};
 344
 345		mmc0: mmc@1c0f000 {
 346			compatible = "allwinner,sun8i-r40-mmc",
 347				     "allwinner,sun50i-a64-mmc";
 348			reg = <0x01c0f000 0x1000>;
 349			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
 350			clock-names = "ahb", "mmc";
 351			resets = <&ccu RST_BUS_MMC0>;
 352			reset-names = "ahb";
 353			pinctrl-0 = <&mmc0_pins>;
 354			pinctrl-names = "default";
 355			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 356			status = "disabled";
 357			#address-cells = <1>;
 358			#size-cells = <0>;
 359		};
 360
 361		mmc1: mmc@1c10000 {
 362			compatible = "allwinner,sun8i-r40-mmc",
 363				     "allwinner,sun50i-a64-mmc";
 364			reg = <0x01c10000 0x1000>;
 365			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
 366			clock-names = "ahb", "mmc";
 367			resets = <&ccu RST_BUS_MMC1>;
 368			reset-names = "ahb";
 369			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 370			status = "disabled";
 371			#address-cells = <1>;
 372			#size-cells = <0>;
 373		};
 374
 375		mmc2: mmc@1c11000 {
 376			compatible = "allwinner,sun8i-r40-emmc",
 377				     "allwinner,sun50i-a64-emmc";
 378			reg = <0x01c11000 0x1000>;
 379			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
 380			clock-names = "ahb", "mmc";
 381			resets = <&ccu RST_BUS_MMC2>;
 382			reset-names = "ahb";
 383			pinctrl-0 = <&mmc2_pins>;
 384			pinctrl-names = "default";
 385			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 386			status = "disabled";
 387			#address-cells = <1>;
 388			#size-cells = <0>;
 389		};
 390
 391		mmc3: mmc@1c12000 {
 392			compatible = "allwinner,sun8i-r40-mmc",
 393				     "allwinner,sun50i-a64-mmc";
 394			reg = <0x01c12000 0x1000>;
 395			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
 396			clock-names = "ahb", "mmc";
 397			resets = <&ccu RST_BUS_MMC3>;
 398			reset-names = "ahb";
 399			pinctrl-0 = <&mmc3_pins>;
 400			pinctrl-names = "default";
 401			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 402			status = "disabled";
 403			#address-cells = <1>;
 404			#size-cells = <0>;
 405		};
 406
 407		usbphy: phy@1c13400 {
 408			compatible = "allwinner,sun8i-r40-usb-phy";
 409			reg = <0x01c13400 0x14>,
 410			      <0x01c14800 0x4>,
 411			      <0x01c19800 0x4>,
 412			      <0x01c1c800 0x4>;
 413			reg-names = "phy_ctrl",
 414				    "pmu0",
 415				    "pmu1",
 416				    "pmu2";
 417			clocks = <&ccu CLK_USB_PHY0>,
 418				 <&ccu CLK_USB_PHY1>,
 419				 <&ccu CLK_USB_PHY2>;
 420			clock-names = "usb0_phy",
 421				      "usb1_phy",
 422				      "usb2_phy";
 423			resets = <&ccu RST_USB_PHY0>,
 424				 <&ccu RST_USB_PHY1>,
 425				 <&ccu RST_USB_PHY2>;
 426			reset-names = "usb0_reset",
 427				      "usb1_reset",
 428				      "usb2_reset";
 429			status = "disabled";
 430			#phy-cells = <1>;
 431		};
 432
 433		crypto: crypto@1c15000 {
 434			compatible = "allwinner,sun8i-r40-crypto";
 435			reg = <0x01c15000 0x1000>;
 436			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 437			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
 438			clock-names = "bus", "mod";
 439			resets = <&ccu RST_BUS_CE>;
 440		};
 441
 442		spi2: spi@1c17000 {
 443			compatible = "allwinner,sun8i-r40-spi",
 444				     "allwinner,sun8i-h3-spi";
 445			reg = <0x01c17000 0x1000>;
 446			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 447			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
 448			clock-names = "ahb", "mod";
 449			resets = <&ccu RST_BUS_SPI2>;
 450			status = "disabled";
 451			#address-cells = <1>;
 452			#size-cells = <0>;
 453		};
 454
 455		ahci: sata@1c18000 {
 456			compatible = "allwinner,sun8i-r40-ahci";
 457			reg = <0x01c18000 0x1000>;
 458			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 459			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
 460			resets = <&ccu RST_BUS_SATA>;
 461			reset-names = "ahci";
 462			status = "disabled";
 463		};
 464
 465		ehci1: usb@1c19000 {
 466			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 467			reg = <0x01c19000 0x100>;
 468			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 469			clocks = <&ccu CLK_BUS_EHCI1>;
 470			resets = <&ccu RST_BUS_EHCI1>;
 471			phys = <&usbphy 1>;
 472			phy-names = "usb";
 473			status = "disabled";
 474		};
 475
 476		ohci1: usb@1c19400 {
 477			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 478			reg = <0x01c19400 0x100>;
 479			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 480			clocks = <&ccu CLK_BUS_OHCI1>,
 481				 <&ccu CLK_USB_OHCI1>;
 482			resets = <&ccu RST_BUS_OHCI1>;
 483			phys = <&usbphy 1>;
 484			phy-names = "usb";
 485			status = "disabled";
 486		};
 487
 488		ehci2: usb@1c1c000 {
 489			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 490			reg = <0x01c1c000 0x100>;
 491			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 492			clocks = <&ccu CLK_BUS_EHCI2>;
 493			resets = <&ccu RST_BUS_EHCI2>;
 494			phys = <&usbphy 2>;
 495			phy-names = "usb";
 496			status = "disabled";
 497		};
 498
 499		ohci2: usb@1c1c400 {
 500			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 501			reg = <0x01c1c400 0x100>;
 502			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 503			clocks = <&ccu CLK_BUS_OHCI2>,
 504				 <&ccu CLK_USB_OHCI2>;
 505			resets = <&ccu RST_BUS_OHCI2>;
 506			phys = <&usbphy 2>;
 507			phy-names = "usb";
 508			status = "disabled";
 509		};
 510
 511		spi3: spi@1c1f000 {
 512			compatible = "allwinner,sun8i-r40-spi",
 513				     "allwinner,sun8i-h3-spi";
 514			reg = <0x01c1f000 0x1000>;
 515			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 516			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
 517			clock-names = "ahb", "mod";
 518			resets = <&ccu RST_BUS_SPI3>;
 519			status = "disabled";
 520			#address-cells = <1>;
 521			#size-cells = <0>;
 522		};
 523
 524		ccu: clock@1c20000 {
 525			compatible = "allwinner,sun8i-r40-ccu";
 526			reg = <0x01c20000 0x400>;
 527			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 528			clock-names = "hosc", "losc";
 529			#clock-cells = <1>;
 530			#reset-cells = <1>;
 531		};
 532
 533		rtc: rtc@1c20400 {
 534			compatible = "allwinner,sun8i-r40-rtc";
 535			reg = <0x01c20400 0x400>;
 536			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 537			clock-output-names = "osc32k", "osc32k-out";
 538			clocks = <&osc32k>;
 539			#clock-cells = <1>;
 540		};
 541
 542		pio: pinctrl@1c20800 {
 543			compatible = "allwinner,sun8i-r40-pinctrl";
 544			reg = <0x01c20800 0x400>;
 545			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 546			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
 547				 <&rtc CLK_OSC32K>;
 548			clock-names = "apb", "hosc", "losc";
 549			gpio-controller;
 550			interrupt-controller;
 551			#interrupt-cells = <3>;
 552			#gpio-cells = <3>;
 553
 554			can_ph_pins: can-ph-pins {
 555				pins = "PH20", "PH21";
 556				function = "can";
 557			};
 558
 559			can_pa_pins: can-pa-pins {
 560				pins = "PA16", "PA17";
 561				function = "can";
 562			};
 563
 564			clk_out_a_pin: clk-out-a-pin {
 565				pins = "PI12";
 566				function = "clk_out_a";
 567			};
 568
 569			/omit-if-no-ref/
 570			csi0_8bits_pins: csi0-8bits-pins {
 571				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
 572				       "PE6", "PE7", "PE8", "PE9", "PE10",
 573				       "PE11";
 574				function = "csi0";
 575			};
 576
 577			/omit-if-no-ref/
 578			csi0_mclk_pin: csi0-mclk-pin {
 579				pins = "PE1";
 580				function = "csi0";
 581			};
 582
 583			gmac_rgmii_pins: gmac-rgmii-pins {
 584				pins = "PA0", "PA1", "PA2", "PA3",
 585				       "PA4", "PA5", "PA6", "PA7",
 586				       "PA8", "PA10", "PA11", "PA12",
 587				       "PA13", "PA15", "PA16";
 588				function = "gmac";
 589				/*
 590				 * data lines in RGMII mode use DDR mode
 591				 * and need a higher signal drive strength
 592				 */
 593				drive-strength = <40>;
 594			};
 595
 596			i2c0_pins: i2c0-pins {
 597				pins = "PB0", "PB1";
 598				function = "i2c0";
 599			};
 600
 601			i2c1_pins: i2c1-pins {
 602				pins = "PB18", "PB19";
 603				function = "i2c1";
 604			};
 605
 606			i2c2_pins: i2c2-pins {
 607				pins = "PB20", "PB21";
 608				function = "i2c2";
 609			};
 610
 611			i2c3_pins: i2c3-pins {
 612				pins = "PI0", "PI1";
 613				function = "i2c3";
 614			};
 615
 616			i2c4_pins: i2c4-pins {
 617				pins = "PI2", "PI3";
 618				function = "i2c4";
 619			};
 620
 621			ir0_pins: ir0-pins {
 622				pins = "PB4";
 623				function = "ir0";
 624			};
 625
 626			ir1_pins: ir1-pins {
 627				pins = "PB23";
 628				function = "ir1";
 629			};
 630
 631			mmc0_pins: mmc0-pins {
 632				pins = "PF0", "PF1", "PF2",
 633				       "PF3", "PF4", "PF5";
 634				function = "mmc0";
 635				drive-strength = <30>;
 636				bias-pull-up;
 637			};
 638
 639			mmc1_pg_pins: mmc1-pg-pins {
 640				pins = "PG0", "PG1", "PG2",
 641				       "PG3", "PG4", "PG5";
 642				function = "mmc1";
 643				drive-strength = <30>;
 644				bias-pull-up;
 645			};
 646
 647			mmc2_pins: mmc2-pins {
 648				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
 649				       "PC10", "PC11", "PC12", "PC13", "PC14",
 650				       "PC15", "PC24";
 651				function = "mmc2";
 652				drive-strength = <30>;
 653				bias-pull-up;
 654			};
 655
 656			/omit-if-no-ref/
 657			mmc3_pins: mmc3-pins {
 658				pins = "PI4", "PI5", "PI6",
 659				       "PI7", "PI8", "PI9";
 660				function = "mmc3";
 661				drive-strength = <30>;
 662				bias-pull-up;
 663			};
 664
 665			/omit-if-no-ref/
 666			spi0_pc_pins: spi0-pc-pins {
 667				pins = "PC0", "PC1", "PC2";
 668				function = "spi0";
 669			};
 670
 671			/omit-if-no-ref/
 672			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
 673				pins = "PC23";
 674				function = "spi0";
 675			};
 676
 677			/omit-if-no-ref/
 678			spi1_pi_pins: spi1-pi-pins {
 679				pins = "PI17", "PI18", "PI19";
 680				function = "spi1";
 681			};
 682
 683			/omit-if-no-ref/
 684			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
 685				pins = "PI16";
 686				function = "spi1";
 687			};
 688
 689			/omit-if-no-ref/
 690			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
 691				pins = "PI15";
 692				function = "spi1";
 693			};
 694
 695			/omit-if-no-ref/
 696			uart0_pb_pins: uart0-pb-pins {
 697				pins = "PB22", "PB23";
 698				function = "uart0";
 699			};
 700
 701			/omit-if-no-ref/
 702			uart2_pi_pins: uart2-pi-pins {
 703				pins = "PI18", "PI19";
 704				function = "uart2";
 705			};
 706
 707			/omit-if-no-ref/
 708			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
 709				pins = "PI16", "PI17";
 710				function = "uart2";
 711			};
 712
 713			/omit-if-no-ref/
 714			uart3_pg_pins: uart3-pg-pins {
 715				pins = "PG6", "PG7";
 716				function = "uart3";
 717			};
 718
 719			/omit-if-no-ref/
 720			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
 721				pins = "PG8", "PG9";
 722				function = "uart3";
 723			};
 724
 725			/omit-if-no-ref/
 726			uart4_pg_pins: uart4-pg-pins {
 727				pins = "PG10", "PG11";
 728				function = "uart4";
 729			};
 730
 731			/omit-if-no-ref/
 732			uart5_ph_pins: uart5-ph-pins {
 733				pins = "PH6", "PH7";
 734				function = "uart5";
 735			};
 736
 737			/omit-if-no-ref/
 738			uart7_pi_pins: uart7-pi-pins {
 739				pins = "PI20", "PI21";
 740				function = "uart7";
 741			};
 742		};
 743
 744		timer@1c20c00 {
 745			compatible = "allwinner,sun4i-a10-timer";
 746			reg = <0x01c20c00 0x90>;
 747			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 748				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 749				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 750				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
 751				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 752				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 753			clocks = <&osc24M>;
 754		};
 755
 756		wdt: watchdog@1c20c90 {
 757			compatible = "allwinner,sun4i-a10-wdt";
 758			reg = <0x01c20c90 0x10>;
 759			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 760			clocks = <&osc24M>;
 761		};
 762
 763		ir0: ir@1c21800 {
 764			compatible = "allwinner,sun8i-r40-ir",
 765				     "allwinner,sun6i-a31-ir";
 766			reg = <0x01c21800 0x400>;
 767			pinctrl-0 = <&ir0_pins>;
 768			pinctrl-names = "default";
 769			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
 770			clock-names = "apb", "ir";
 771			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 772			resets = <&ccu RST_BUS_IR0>;
 773			status = "disabled";
 774		};
 775
 776		ir1: ir@1c21c00 {
 777			compatible = "allwinner,sun8i-r40-ir",
 778				     "allwinner,sun6i-a31-ir";
 779			reg = <0x01c21c00 0x400>;
 780			pinctrl-0 = <&ir1_pins>;
 781			pinctrl-names = "default";
 782			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
 783			clock-names = "apb", "ir";
 784			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 785			resets = <&ccu RST_BUS_IR1>;
 786			status = "disabled";
 787		};
 788
 789		i2s0: i2s@1c22000 {
 790			#sound-dai-cells = <0>;
 791			compatible = "allwinner,sun8i-r40-i2s",
 792				     "allwinner,sun8i-h3-i2s";
 793			reg = <0x01c22000 0x400>;
 794			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 795			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
 796			clock-names = "apb", "mod";
 797			resets = <&ccu RST_BUS_I2S0>;
 798			dmas = <&dma 3>, <&dma 3>;
 799			dma-names = "rx", "tx";
 800		};
 801
 802		i2s1: i2s@1c22400 {
 803			#sound-dai-cells = <0>;
 804			compatible = "allwinner,sun8i-r40-i2s",
 805				     "allwinner,sun8i-h3-i2s";
 806			reg = <0x01c22400 0x400>;
 807			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 808			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
 809			clock-names = "apb", "mod";
 810			resets = <&ccu RST_BUS_I2S1>;
 811			dmas = <&dma 4>, <&dma 4>;
 812			dma-names = "rx", "tx";
 813		};
 814
 815		i2s2: i2s@1c22800 {
 816			#sound-dai-cells = <0>;
 817			compatible = "allwinner,sun8i-r40-i2s",
 818				     "allwinner,sun8i-h3-i2s";
 819			reg = <0x01c22800 0x400>;
 820			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 821			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
 822			clock-names = "apb", "mod";
 823			resets = <&ccu RST_BUS_I2S2>;
 824			dmas = <&dma 6>, <&dma 6>;
 825			dma-names = "rx", "tx";
 826		};
 827
 828		ths: thermal-sensor@1c24c00 {
 829			compatible = "allwinner,sun8i-r40-ths";
 830			reg = <0x01c24c00 0x100>;
 831			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
 832			clock-names = "bus", "mod";
 833			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 834			resets = <&ccu RST_BUS_THS>;
 835			/* TODO: add nvmem-cells for calibration */
 836			#thermal-sensor-cells = <1>;
 837		};
 838
 839		uart0: serial@1c28000 {
 840			compatible = "snps,dw-apb-uart";
 841			reg = <0x01c28000 0x400>;
 842			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 843			reg-shift = <2>;
 844			reg-io-width = <4>;
 845			clocks = <&ccu CLK_BUS_UART0>;
 846			resets = <&ccu RST_BUS_UART0>;
 847			status = "disabled";
 848		};
 849
 850		uart1: serial@1c28400 {
 851			compatible = "snps,dw-apb-uart";
 852			reg = <0x01c28400 0x400>;
 853			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 854			reg-shift = <2>;
 855			reg-io-width = <4>;
 856			clocks = <&ccu CLK_BUS_UART1>;
 857			resets = <&ccu RST_BUS_UART1>;
 858			status = "disabled";
 859		};
 860
 861		uart2: serial@1c28800 {
 862			compatible = "snps,dw-apb-uart";
 863			reg = <0x01c28800 0x400>;
 864			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 865			reg-shift = <2>;
 866			reg-io-width = <4>;
 867			clocks = <&ccu CLK_BUS_UART2>;
 868			resets = <&ccu RST_BUS_UART2>;
 869			status = "disabled";
 870		};
 871
 872		uart3: serial@1c28c00 {
 873			compatible = "snps,dw-apb-uart";
 874			reg = <0x01c28c00 0x400>;
 875			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 876			reg-shift = <2>;
 877			reg-io-width = <4>;
 878			clocks = <&ccu CLK_BUS_UART3>;
 879			resets = <&ccu RST_BUS_UART3>;
 880			status = "disabled";
 881		};
 882
 883		uart4: serial@1c29000 {
 884			compatible = "snps,dw-apb-uart";
 885			reg = <0x01c29000 0x400>;
 886			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 887			reg-shift = <2>;
 888			reg-io-width = <4>;
 889			clocks = <&ccu CLK_BUS_UART4>;
 890			resets = <&ccu RST_BUS_UART4>;
 891			status = "disabled";
 892		};
 893
 894		uart5: serial@1c29400 {
 895			compatible = "snps,dw-apb-uart";
 896			reg = <0x01c29400 0x400>;
 897			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 898			reg-shift = <2>;
 899			reg-io-width = <4>;
 900			clocks = <&ccu CLK_BUS_UART5>;
 901			resets = <&ccu RST_BUS_UART5>;
 902			status = "disabled";
 903		};
 904
 905		uart6: serial@1c29800 {
 906			compatible = "snps,dw-apb-uart";
 907			reg = <0x01c29800 0x400>;
 908			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 909			reg-shift = <2>;
 910			reg-io-width = <4>;
 911			clocks = <&ccu CLK_BUS_UART6>;
 912			resets = <&ccu RST_BUS_UART6>;
 913			status = "disabled";
 914		};
 915
 916		uart7: serial@1c29c00 {
 917			compatible = "snps,dw-apb-uart";
 918			reg = <0x01c29c00 0x400>;
 919			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 920			reg-shift = <2>;
 921			reg-io-width = <4>;
 922			clocks = <&ccu CLK_BUS_UART7>;
 923			resets = <&ccu RST_BUS_UART7>;
 924			status = "disabled";
 925		};
 926
 927		i2c0: i2c@1c2ac00 {
 928			compatible = "allwinner,sun6i-a31-i2c";
 929			reg = <0x01c2ac00 0x400>;
 930			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 931			clocks = <&ccu CLK_BUS_I2C0>;
 932			resets = <&ccu RST_BUS_I2C0>;
 933			pinctrl-0 = <&i2c0_pins>;
 934			pinctrl-names = "default";
 935			status = "disabled";
 936			#address-cells = <1>;
 937			#size-cells = <0>;
 938		};
 939
 940		i2c1: i2c@1c2b000 {
 941			compatible = "allwinner,sun6i-a31-i2c";
 942			reg = <0x01c2b000 0x400>;
 943			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 944			clocks = <&ccu CLK_BUS_I2C1>;
 945			resets = <&ccu RST_BUS_I2C1>;
 946			pinctrl-0 = <&i2c1_pins>;
 947			pinctrl-names = "default";
 948			status = "disabled";
 949			#address-cells = <1>;
 950			#size-cells = <0>;
 951		};
 952
 953		i2c2: i2c@1c2b400 {
 954			compatible = "allwinner,sun6i-a31-i2c";
 955			reg = <0x01c2b400 0x400>;
 956			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 957			clocks = <&ccu CLK_BUS_I2C2>;
 958			resets = <&ccu RST_BUS_I2C2>;
 959			pinctrl-0 = <&i2c2_pins>;
 960			pinctrl-names = "default";
 961			status = "disabled";
 962			#address-cells = <1>;
 963			#size-cells = <0>;
 964		};
 965
 966		i2c3: i2c@1c2b800 {
 967			compatible = "allwinner,sun6i-a31-i2c";
 968			reg = <0x01c2b800 0x400>;
 969			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 970			clocks = <&ccu CLK_BUS_I2C3>;
 971			resets = <&ccu RST_BUS_I2C3>;
 972			pinctrl-0 = <&i2c3_pins>;
 973			pinctrl-names = "default";
 974			status = "disabled";
 975			#address-cells = <1>;
 976			#size-cells = <0>;
 977		};
 978
 979		can0: can@1c2bc00 {
 980			compatible = "allwinner,sun8i-r40-can";
 981			reg = <0x01c2bc00 0x400>;
 982			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 983			clocks = <&ccu CLK_BUS_CAN>;
 984			resets = <&ccu RST_BUS_CAN>;
 985			status = "disabled";
 986		};
 987
 988		i2c4: i2c@1c2c000 {
 989			compatible = "allwinner,sun6i-a31-i2c";
 990			reg = <0x01c2c000 0x400>;
 991			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 992			clocks = <&ccu CLK_BUS_I2C4>;
 993			resets = <&ccu RST_BUS_I2C4>;
 994			pinctrl-0 = <&i2c4_pins>;
 995			pinctrl-names = "default";
 996			status = "disabled";
 997			#address-cells = <1>;
 998			#size-cells = <0>;
 999		};
1000
1001		mali: gpu@1c40000 {
1002			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
1003			reg = <0x01c40000 0x10000>;
1004			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1005				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
1006				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1007				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
1008				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
1009				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
1010				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
1011			interrupt-names = "gp",
1012					  "gpmmu",
1013					  "pp0",
1014					  "ppmmu0",
1015					  "pp1",
1016					  "ppmmu1",
1017					  "pmu";
1018			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
1019			clock-names = "bus", "core";
1020			resets = <&ccu RST_BUS_GPU>;
1021		};
1022
1023		gmac: ethernet@1c50000 {
1024			compatible = "allwinner,sun8i-r40-gmac";
1025			syscon = <&ccu>;
1026			reg = <0x01c50000 0x10000>;
1027			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1028			interrupt-names = "macirq";
1029			resets = <&ccu RST_BUS_GMAC>;
1030			reset-names = "stmmaceth";
1031			clocks = <&ccu CLK_BUS_GMAC>;
1032			clock-names = "stmmaceth";
1033			status = "disabled";
1034
1035			gmac_mdio: mdio {
1036				compatible = "snps,dwmac-mdio";
1037				#address-cells = <1>;
1038				#size-cells = <0>;
1039			};
1040		};
1041
1042		mbus: dram-controller@1c62000 {
1043			compatible = "allwinner,sun8i-r40-mbus";
1044			reg = <0x01c62000 0x1000>;
1045			clocks = <&ccu 155>;
1046			#address-cells = <1>;
1047			#size-cells = <1>;
1048			dma-ranges = <0x00000000 0x40000000 0x80000000>;
1049			#interconnect-cells = <1>;
1050		};
1051
1052		tcon_top: tcon-top@1c70000 {
1053			compatible = "allwinner,sun8i-r40-tcon-top";
1054			reg = <0x01c70000 0x1000>;
1055			clocks = <&ccu CLK_BUS_TCON_TOP>,
1056				 <&ccu CLK_TCON_TV0>,
1057				 <&ccu CLK_TVE0>,
1058				 <&ccu CLK_TCON_TV1>,
1059				 <&ccu CLK_TVE1>,
1060				 <&ccu CLK_DSI_DPHY>;
1061			clock-names = "bus",
1062				      "tcon-tv0",
1063				      "tve0",
1064				      "tcon-tv1",
1065				      "tve1",
1066				      "dsi";
1067			clock-output-names = "tcon-top-tv0",
1068					     "tcon-top-tv1",
1069					     "tcon-top-dsi";
1070			resets = <&ccu RST_BUS_TCON_TOP>;
1071			#clock-cells = <1>;
1072
1073			ports {
1074				#address-cells = <1>;
1075				#size-cells = <0>;
1076
1077				tcon_top_mixer0_in: port@0 {
1078					reg = <0>;
1079
1080					tcon_top_mixer0_in_mixer0: endpoint {
1081						remote-endpoint = <&mixer0_out_tcon_top>;
1082					};
1083				};
1084
1085				tcon_top_mixer0_out: port@1 {
1086					#address-cells = <1>;
1087					#size-cells = <0>;
1088					reg = <1>;
1089
1090					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
1091						reg = <0>;
1092					};
1093
1094					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
1095						reg = <1>;
1096					};
1097
1098					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
1099						reg = <2>;
1100						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
1101					};
1102
1103					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
1104						reg = <3>;
1105						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
1106					};
1107				};
1108
1109				tcon_top_mixer1_in: port@2 {
1110					#address-cells = <1>;
1111					#size-cells = <0>;
1112					reg = <2>;
1113
1114					tcon_top_mixer1_in_mixer1: endpoint@1 {
1115						reg = <1>;
1116						remote-endpoint = <&mixer1_out_tcon_top>;
1117					};
1118				};
1119
1120				tcon_top_mixer1_out: port@3 {
1121					#address-cells = <1>;
1122					#size-cells = <0>;
1123					reg = <3>;
1124
1125					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
1126						reg = <0>;
1127					};
1128
1129					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
1130						reg = <1>;
1131					};
1132
1133					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
1134						reg = <2>;
1135						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
1136					};
1137
1138					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
1139						reg = <3>;
1140						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
1141					};
1142				};
1143
1144				tcon_top_hdmi_in: port@4 {
1145					#address-cells = <1>;
1146					#size-cells = <0>;
1147					reg = <4>;
1148
1149					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
1150						reg = <0>;
1151						remote-endpoint = <&tcon_tv0_out_tcon_top>;
1152					};
1153
1154					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
1155						reg = <1>;
1156						remote-endpoint = <&tcon_tv1_out_tcon_top>;
1157					};
1158				};
1159
1160				tcon_top_hdmi_out: port@5 {
1161					reg = <5>;
1162
1163					tcon_top_hdmi_out_hdmi: endpoint {
1164						remote-endpoint = <&hdmi_in_tcon_top>;
1165					};
1166				};
1167			};
1168		};
1169
1170		tcon_tv0: lcd-controller@1c73000 {
1171			compatible = "allwinner,sun8i-r40-tcon-tv";
1172			reg = <0x01c73000 0x1000>;
1173			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1174			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
1175			clock-names = "ahb", "tcon-ch1";
1176			resets = <&ccu RST_BUS_TCON_TV0>;
1177			reset-names = "lcd";
1178			status = "disabled";
1179
1180			ports {
1181				#address-cells = <1>;
1182				#size-cells = <0>;
1183
1184				tcon_tv0_in: port@0 {
1185					#address-cells = <1>;
1186					#size-cells = <0>;
1187					reg = <0>;
1188
1189					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
1190						reg = <0>;
1191						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
1192					};
1193
1194					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
1195						reg = <1>;
1196						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
1197					};
1198				};
1199
1200				tcon_tv0_out: port@1 {
1201					#address-cells = <1>;
1202					#size-cells = <0>;
1203					reg = <1>;
1204
1205					tcon_tv0_out_tcon_top: endpoint@1 {
1206						reg = <1>;
1207						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
1208					};
1209				};
1210			};
1211		};
1212
1213		tcon_tv1: lcd-controller@1c74000 {
1214			compatible = "allwinner,sun8i-r40-tcon-tv";
1215			reg = <0x01c74000 0x1000>;
1216			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
1217			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
1218			clock-names = "ahb", "tcon-ch1";
1219			resets = <&ccu RST_BUS_TCON_TV1>;
1220			reset-names = "lcd";
1221			status = "disabled";
1222
1223			ports {
1224				#address-cells = <1>;
1225				#size-cells = <0>;
1226
1227				tcon_tv1_in: port@0 {
1228					#address-cells = <1>;
1229					#size-cells = <0>;
1230					reg = <0>;
1231
1232					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
1233						reg = <0>;
1234						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
1235					};
1236
1237					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
1238						reg = <1>;
1239						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
1240					};
1241				};
1242
1243				tcon_tv1_out: port@1 {
1244					#address-cells = <1>;
1245					#size-cells = <0>;
1246					reg = <1>;
1247
1248					tcon_tv1_out_tcon_top: endpoint@1 {
1249						reg = <1>;
1250						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
1251					};
1252				};
1253			};
1254		};
1255
1256		gic: interrupt-controller@1c81000 {
1257			compatible = "arm,gic-400";
1258			reg = <0x01c81000 0x1000>,
1259			      <0x01c82000 0x2000>,
1260			      <0x01c84000 0x2000>,
1261			      <0x01c86000 0x2000>;
1262			interrupt-controller;
1263			#interrupt-cells = <3>;
1264			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
1265		};
1266
1267		hdmi: hdmi@1ee0000 {
1268			compatible = "allwinner,sun8i-r40-dw-hdmi",
1269				     "allwinner,sun8i-a83t-dw-hdmi";
1270			reg = <0x01ee0000 0x10000>;
1271			reg-io-width = <1>;
1272			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
1273			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
1274				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
1275			clock-names = "iahb", "isfr", "tmds", "cec";
1276			resets = <&ccu RST_BUS_HDMI1>;
1277			reset-names = "ctrl";
1278			phys = <&hdmi_phy>;
1279			phy-names = "phy";
1280			status = "disabled";
1281
1282			ports {
1283				#address-cells = <1>;
1284				#size-cells = <0>;
1285
1286				hdmi_in: port@0 {
1287					reg = <0>;
1288
1289					hdmi_in_tcon_top: endpoint {
1290						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
1291					};
1292				};
1293
1294				hdmi_out: port@1 {
1295					reg = <1>;
1296				};
1297			};
1298		};
1299
1300		hdmi_phy: hdmi-phy@1ef0000 {
1301			compatible = "allwinner,sun8i-r40-hdmi-phy";
1302			reg = <0x01ef0000 0x10000>;
1303			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
1304				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
1305			clock-names = "bus", "mod", "pll-0", "pll-1";
1306			resets = <&ccu RST_BUS_HDMI0>;
1307			reset-names = "phy";
1308			#phy-cells = <0>;
1309		};
1310	};
1311
1312	pmu {
1313		compatible = "arm,cortex-a7-pmu";
1314		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1315			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
1316			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
1317			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1318		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
1319	};
1320
1321	timer {
1322		compatible = "arm,armv7-timer";
1323		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1324			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1325			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1326			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
1327	};
1328};