1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
  2// Copyright (C) 2023 In-Circuit GmbH
  3
  4/dts-v1/;
  5
  6#include "sun7i-a20-icnova-a20.dtsi"
  7
  8#include <dt-bindings/gpio/gpio.h>
  9#include <dt-bindings/leds/common.h>
 10
 11/ {
 12	model = "In-Circuit ICnova A20 ADB4006";
 13	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
 14		     "allwinner,sun7i-a20";
 15
 16	aliases {
 17		serial0 = &uart0;
 18	};
 19
 20	chosen {
 21		stdout-path = "serial0:115200n8";
 22	};
 23
 24	hdmi-connector {
 25		compatible = "hdmi-connector";
 26		type = "a";
 27
 28		port {
 29			hdmi_con_in: endpoint {
 30				remote-endpoint = <&hdmi_out_con>;
 31			};
 32		};
 33	};
 34
 35	leds {
 36		compatible = "gpio-leds";
 37
 38		led-0 {
 39			function = LED_FUNCTION_POWER;
 40			color = <LED_COLOR_ID_YELLOW>;
 41			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
 42			default-state = "on";
 43		};
 44
 45		led-1 {
 46			function = LED_FUNCTION_HEARTBEAT;
 47			color = <LED_COLOR_ID_RED>;
 48			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
 49			linux,default-trigger = "heartbeat";
 50		};
 51	};
 52};
 53
 54&ahci {
 55	target-supply = <&reg_ahci_5v>;
 56	status = "okay";
 57};
 58
 59&codec {
 60	status = "okay";
 61};
 62
 63&de {
 64	status = "okay";
 65};
 66
 67&ehci0 {
 68	status = "okay";
 69};
 70
 71&ehci1 {
 72	status = "okay";
 73};
 74
 75&hdmi {
 76	status = "okay";
 77};
 78
 79&hdmi_out {
 80	hdmi_out_con: endpoint {
 81		remote-endpoint = <&hdmi_con_in>;
 82	};
 83};
 84
 85&mmc0 {
 86	vmmc-supply = <&reg_vcc3v3>;
 87	bus-width = <4>;
 88	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 89	status = "okay";
 90};
 91
 92&ohci0 {
 93	status = "okay";
 94};
 95
 96&ohci1 {
 97	status = "okay";
 98};
 99
100&otg_sram {
101	status = "okay";
102};
103
104&reg_ahci_5v {
105	status = "okay";
106};
107
108&ac_power_supply {
109	status = "okay";
110};
111
112&reg_usb1_vbus {
113	status = "okay";
114};
115
116&reg_usb2_vbus {
117	status = "okay";
118};
119
120&uart0 {
121	pinctrl-names = "default";
122	pinctrl-0 = <&uart0_pb_pins>;
123	status = "okay";
124};
125
126&usb_otg {
127	dr_mode = "otg";
128	status = "okay";
129};
130
131&usbphy {
132	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
133	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
134	usb1_vbus-supply = <&reg_usb1_vbus>;
135	usb2_vbus-supply = <&reg_usb2_vbus>;
136	status = "okay";
137};