Linux Audio

Check our new training course

Loading...
v6.13.7
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2#ifndef __SOUND_EMU8000_H
  3#define __SOUND_EMU8000_H
  4/*
  5 *  Defines for the emu8000 (AWE32/64)
  6 *
  7 *  Copyright (C) 1999 Steve Ratcliffe
  8 *  Copyright (C) 1999-2000 Takashi Iwai <tiwai@suse.de>
  9 */
 10
 11#include <sound/emux_synth.h>
 12#include <sound/seq_kernel.h>
 13
 14/*
 15 * Hardware parameters.
 16 */
 17#define EMU8000_MAX_DRAM (28 * 1024 * 1024) /* Max on-board mem is 28Mb ???*/
 18#define EMU8000_DRAM_OFFSET 0x200000	/* Beginning of on board ram */
 19#define EMU8000_CHANNELS   32	/* Number of hardware channels */
 20#define EMU8000_DRAM_VOICES	30	/* number of normal voices */
 21
 22/* Flags to set a dma channel to read or write */
 23#define EMU8000_RAM_READ   0
 24#define EMU8000_RAM_WRITE  1
 25#define EMU8000_RAM_CLOSE  2
 26#define EMU8000_RAM_MODE_MASK	0x03
 27#define EMU8000_RAM_RIGHT	0x10	/* use 'right' DMA channel */
 28
 29enum {
 30	EMU8000_CONTROL_BASS = 0,
 31	EMU8000_CONTROL_TREBLE,
 32	EMU8000_CONTROL_CHORUS_MODE,
 33	EMU8000_CONTROL_REVERB_MODE,
 34	EMU8000_CONTROL_FM_CHORUS_DEPTH,
 35	EMU8000_CONTROL_FM_REVERB_DEPTH,
 36	EMU8000_NUM_CONTROLS,
 37};
 38
 39/*
 40 * Structure to hold all state information for the emu8000 driver.
 41 *
 42 * Note 1: The chip supports 32 channels in hardware this is max_channels
 43 * some of the channels may be used for other things so max_channels is
 44 * the number in use for wave voices.
 45 */
 46struct snd_emu8000 {
 47
 48	struct snd_emux *emu;
 49
 50	int index;		/* sequencer client index */
 51	int seq_ports;		/* number of sequencer ports */
 52	int fm_chorus_depth;	/* FM OPL3 chorus depth */
 53	int fm_reverb_depth;	/* FM OPL3 reverb depth */
 54
 55	int mem_size;		/* memory size */
 56	unsigned long port1;	/* Port usually base+0 */
 57	unsigned long port2;	/* Port usually at base+0x400 */
 58	unsigned long port3;	/* Port usually at base+0x800 */
 59	unsigned short last_reg;/* Last register command */
 60	spinlock_t reg_lock;
 61
 62	int dram_checked;
 63
 64	struct snd_card *card;		/* The card that this belongs to */
 65
 66	int chorus_mode;
 67	int reverb_mode;
 68	int bass_level;
 69	int treble_level;
 70
 71	struct snd_util_memhdr *memhdr;
 72
 73	spinlock_t control_lock;
 74	struct snd_kcontrol *controls[EMU8000_NUM_CONTROLS];
 75
 76	struct snd_pcm *pcm; /* pcm on emu8000 wavetable */
 77
 78};
 79
 80/* sequencer device id */
 81#define SNDRV_SEQ_DEV_ID_EMU8000	"emu8000-synth"
 82
 83
 84/* exported functions */
 85int snd_emu8000_new(struct snd_card *card, int device, long port, int seq_ports,
 86		    struct snd_seq_device **ret);
 87void snd_emu8000_poke(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
 88		      unsigned int val);
 89unsigned short snd_emu8000_peek(struct snd_emu8000 *emu, unsigned int port,
 90				unsigned int reg);
 91void snd_emu8000_poke_dw(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
 92			 unsigned int val);
 93unsigned int snd_emu8000_peek_dw(struct snd_emu8000 *emu, unsigned int port,
 94				 unsigned int reg);
 95void snd_emu8000_dma_chan(struct snd_emu8000 *emu, int ch, int mode);
 96
 97void snd_emu8000_init_fm(struct snd_emu8000 *emu);
 98
 99void snd_emu8000_update_chorus_mode(struct snd_emu8000 *emu);
100void snd_emu8000_update_reverb_mode(struct snd_emu8000 *emu);
101void snd_emu8000_update_equalizer(struct snd_emu8000 *emu);
102int snd_emu8000_load_chorus_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
103int snd_emu8000_load_reverb_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
104
105#endif /* __SOUND_EMU8000_H */
v6.2
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2#ifndef __SOUND_EMU8000_H
  3#define __SOUND_EMU8000_H
  4/*
  5 *  Defines for the emu8000 (AWE32/64)
  6 *
  7 *  Copyright (C) 1999 Steve Ratcliffe
  8 *  Copyright (C) 1999-2000 Takashi Iwai <tiwai@suse.de>
  9 */
 10
 11#include <sound/emux_synth.h>
 12#include <sound/seq_kernel.h>
 13
 14/*
 15 * Hardware parameters.
 16 */
 17#define EMU8000_MAX_DRAM (28 * 1024 * 1024) /* Max on-board mem is 28Mb ???*/
 18#define EMU8000_DRAM_OFFSET 0x200000	/* Beginning of on board ram */
 19#define EMU8000_CHANNELS   32	/* Number of hardware channels */
 20#define EMU8000_DRAM_VOICES	30	/* number of normal voices */
 21
 22/* Flags to set a dma channel to read or write */
 23#define EMU8000_RAM_READ   0
 24#define EMU8000_RAM_WRITE  1
 25#define EMU8000_RAM_CLOSE  2
 26#define EMU8000_RAM_MODE_MASK	0x03
 27#define EMU8000_RAM_RIGHT	0x10	/* use 'right' DMA channel */
 28
 29enum {
 30	EMU8000_CONTROL_BASS = 0,
 31	EMU8000_CONTROL_TREBLE,
 32	EMU8000_CONTROL_CHORUS_MODE,
 33	EMU8000_CONTROL_REVERB_MODE,
 34	EMU8000_CONTROL_FM_CHORUS_DEPTH,
 35	EMU8000_CONTROL_FM_REVERB_DEPTH,
 36	EMU8000_NUM_CONTROLS,
 37};
 38
 39/*
 40 * Structure to hold all state information for the emu8000 driver.
 41 *
 42 * Note 1: The chip supports 32 channels in hardware this is max_channels
 43 * some of the channels may be used for other things so max_channels is
 44 * the number in use for wave voices.
 45 */
 46struct snd_emu8000 {
 47
 48	struct snd_emux *emu;
 49
 50	int index;		/* sequencer client index */
 51	int seq_ports;		/* number of sequencer ports */
 52	int fm_chorus_depth;	/* FM OPL3 chorus depth */
 53	int fm_reverb_depth;	/* FM OPL3 reverb depth */
 54
 55	int mem_size;		/* memory size */
 56	unsigned long port1;	/* Port usually base+0 */
 57	unsigned long port2;	/* Port usually at base+0x400 */
 58	unsigned long port3;	/* Port usually at base+0x800 */
 59	unsigned short last_reg;/* Last register command */
 60	spinlock_t reg_lock;
 61
 62	int dram_checked;
 63
 64	struct snd_card *card;		/* The card that this belongs to */
 65
 66	int chorus_mode;
 67	int reverb_mode;
 68	int bass_level;
 69	int treble_level;
 70
 71	struct snd_util_memhdr *memhdr;
 72
 73	spinlock_t control_lock;
 74	struct snd_kcontrol *controls[EMU8000_NUM_CONTROLS];
 75
 76	struct snd_pcm *pcm; /* pcm on emu8000 wavetable */
 77
 78};
 79
 80/* sequencer device id */
 81#define SNDRV_SEQ_DEV_ID_EMU8000	"emu8000-synth"
 82
 83
 84/* exported functions */
 85int snd_emu8000_new(struct snd_card *card, int device, long port, int seq_ports,
 86		    struct snd_seq_device **ret);
 87void snd_emu8000_poke(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
 88		      unsigned int val);
 89unsigned short snd_emu8000_peek(struct snd_emu8000 *emu, unsigned int port,
 90				unsigned int reg);
 91void snd_emu8000_poke_dw(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
 92			 unsigned int val);
 93unsigned int snd_emu8000_peek_dw(struct snd_emu8000 *emu, unsigned int port,
 94				 unsigned int reg);
 95void snd_emu8000_dma_chan(struct snd_emu8000 *emu, int ch, int mode);
 96
 97void snd_emu8000_init_fm(struct snd_emu8000 *emu);
 98
 99void snd_emu8000_update_chorus_mode(struct snd_emu8000 *emu);
100void snd_emu8000_update_reverb_mode(struct snd_emu8000 *emu);
101void snd_emu8000_update_equalizer(struct snd_emu8000 *emu);
102int snd_emu8000_load_chorus_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
103int snd_emu8000_load_reverb_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
104
105#endif /* __SOUND_EMU8000_H */