Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/kernel/entry-armv.S
4 *
5 * Copyright (C) 1996,1997,1998 Russell King.
6 * ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
7 * nommu support by Hyok S. Choi (hyok.choi@samsung.com)
8 *
9 * Low-level vector interface routines
10 *
11 * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction
12 * that causes it to save wrong values... Be aware!
13 */
14
15#include <linux/init.h>
16
17#include <asm/assembler.h>
18#include <asm/page.h>
19#include <asm/glue-df.h>
20#include <asm/glue-pf.h>
21#include <asm/vfpmacros.h>
22#include <asm/thread_notify.h>
23#include <asm/unwind.h>
24#include <asm/unistd.h>
25#include <asm/tls.h>
26#include <asm/system_info.h>
27#include <asm/uaccess-asm.h>
28#include <asm/kasan_def.h>
29
30#include "entry-header.S"
31#include <asm/probes.h>
32
33#ifdef CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION
34#define RELOC_TEXT_NONE .reloc .text, R_ARM_NONE, .
35#else
36#define RELOC_TEXT_NONE
37#endif
38
39/*
40 * Interrupt handling.
41 */
42 .macro irq_handler, from_user:req
43 mov r1, sp
44 ldr_this_cpu r2, irq_stack_ptr, r2, r3
45 .if \from_user == 0
46 @
47 @ If we took the interrupt while running in the kernel, we may already
48 @ be using the IRQ stack, so revert to the original value in that case.
49 @
50 subs r3, r2, r1 @ SP above bottom of IRQ stack?
51 rsbscs r3, r3, #THREAD_SIZE @ ... and below the top?
52#ifdef CONFIG_VMAP_STACK
53 ldr_va r3, high_memory, cc @ End of the linear region
54 cmpcc r3, r1 @ Stack pointer was below it?
55#endif
56 bcc 0f @ If not, switch to the IRQ stack
57 mov r0, r1
58 bl generic_handle_arch_irq
59 b 1f
600:
61 .endif
62
63 mov_l r0, generic_handle_arch_irq
64 bl call_with_stack
651:
66 .endm
67
68 .macro pabt_helper
69 @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
70#ifdef MULTI_PABORT
71 ldr_va ip, processor, offset=PROCESSOR_PABT_FUNC
72 bl_r ip
73#else
74 bl CPU_PABORT_HANDLER
75#endif
76 .endm
77
78 .macro dabt_helper
79
80 @
81 @ Call the processor-specific abort handler:
82 @
83 @ r2 - pt_regs
84 @ r4 - aborted context pc
85 @ r5 - aborted context psr
86 @
87 @ The abort handler must return the aborted address in r0, and
88 @ the fault status register in r1. r9 must be preserved.
89 @
90#ifdef MULTI_DABORT
91 ldr_va ip, processor, offset=PROCESSOR_DABT_FUNC
92 bl_r ip
93#else
94 bl CPU_DABORT_HANDLER
95#endif
96 .endm
97
98 .section .entry.text,"ax",%progbits
99
100/*
101 * Invalid mode handlers
102 */
103 .macro inv_entry, reason
104 sub sp, sp, #PT_REGS_SIZE
105 ARM( stmib sp, {r1 - lr} )
106 THUMB( stmia sp, {r0 - r12} )
107 THUMB( str sp, [sp, #S_SP] )
108 THUMB( str lr, [sp, #S_LR] )
109 mov r1, #\reason
110 .endm
111
112__pabt_invalid:
113 inv_entry BAD_PREFETCH
114 b common_invalid
115ENDPROC(__pabt_invalid)
116
117__dabt_invalid:
118 inv_entry BAD_DATA
119 b common_invalid
120ENDPROC(__dabt_invalid)
121
122__irq_invalid:
123 inv_entry BAD_IRQ
124 b common_invalid
125ENDPROC(__irq_invalid)
126
127__und_invalid:
128 inv_entry BAD_UNDEFINSTR
129
130 @
131 @ XXX fall through to common_invalid
132 @
133
134@
135@ common_invalid - generic code for failed exception (re-entrant version of handlers)
136@
137common_invalid:
138 zero_fp
139
140 ldmia r0, {r4 - r6}
141 add r0, sp, #S_PC @ here for interlock avoidance
142 mov r7, #-1 @ "" "" "" ""
143 str r4, [sp] @ save preserved r0
144 stmia r0, {r5 - r7} @ lr_<exception>,
145 @ cpsr_<exception>, "old_r0"
146
147 mov r0, sp
148 b bad_mode
149ENDPROC(__und_invalid)
150
151/*
152 * SVC mode handlers
153 */
154
155#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
156#define SPFIX(code...) code
157#else
158#define SPFIX(code...)
159#endif
160
161 .macro svc_entry, stack_hole=0, trace=1, uaccess=1, overflow_check=1
162 UNWIND(.fnstart )
163 sub sp, sp, #(SVC_REGS_SIZE + \stack_hole)
164 THUMB( add sp, r1 ) @ get SP in a GPR without
165 THUMB( sub r1, sp, r1 ) @ using a temp register
166
167 .if \overflow_check
168 UNWIND(.save {r0 - pc} )
169 do_overflow_check (SVC_REGS_SIZE + \stack_hole)
170 .endif
171
172#ifdef CONFIG_THUMB2_KERNEL
173 tst r1, #4 @ test stack pointer alignment
174 sub r1, sp, r1 @ restore original R1
175 sub sp, r1 @ restore original SP
176#else
177 SPFIX( tst sp, #4 )
178#endif
179 SPFIX( subne sp, sp, #4 )
180
181 ARM( stmib sp, {r1 - r12} )
182 THUMB( stmia sp, {r0 - r12} ) @ No STMIB in Thumb-2
183
184 ldmia r0, {r3 - r5}
185 add r7, sp, #S_SP @ here for interlock avoidance
186 mov r6, #-1 @ "" "" "" ""
187 add r2, sp, #(SVC_REGS_SIZE + \stack_hole)
188 SPFIX( addne r2, r2, #4 )
189 str r3, [sp] @ save the "real" r0 copied
190 @ from the exception stack
191
192 mov r3, lr
193
194 @
195 @ We are now ready to fill in the remaining blanks on the stack:
196 @
197 @ r2 - sp_svc
198 @ r3 - lr_svc
199 @ r4 - lr_<exception>, already fixed up for correct return/restart
200 @ r5 - spsr_<exception>
201 @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
202 @
203 stmia r7, {r2 - r6}
204
205 get_thread_info tsk
206 uaccess_entry tsk, r0, r1, r2, \uaccess
207
208 .if \trace
209#ifdef CONFIG_TRACE_IRQFLAGS
210 bl trace_hardirqs_off
211#endif
212 .endif
213 .endm
214
215 .align 5
216__dabt_svc:
217 svc_entry uaccess=0
218 mov r2, sp
219 dabt_helper
220 THUMB( ldr r5, [sp, #S_PSR] ) @ potentially updated CPSR
221 svc_exit r5 @ return from exception
222 UNWIND(.fnend )
223ENDPROC(__dabt_svc)
224
225 .align 5
226__irq_svc:
227 svc_entry
228 irq_handler from_user=0
229
230#ifdef CONFIG_PREEMPTION
231 ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
232 ldr r0, [tsk, #TI_FLAGS] @ get flags
233 teq r8, #0 @ if preempt count != 0
234 movne r0, #0 @ force flags to 0
235 tst r0, #_TIF_NEED_RESCHED
236 blne svc_preempt
237#endif
238
239 svc_exit r5, irq = 1 @ return from exception
240 UNWIND(.fnend )
241ENDPROC(__irq_svc)
242
243 .ltorg
244
245#ifdef CONFIG_PREEMPTION
246svc_preempt:
247 mov r8, lr
2481: bl preempt_schedule_irq @ irq en/disable is done inside
249 ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS
250 tst r0, #_TIF_NEED_RESCHED
251 reteq r8 @ go again
252 b 1b
253#endif
254
255__und_fault:
256 @ Correct the PC such that it is pointing at the instruction
257 @ which caused the fault. If the faulting instruction was ARM
258 @ the PC will be pointing at the next instruction, and have to
259 @ subtract 4. Otherwise, it is Thumb, and the PC will be
260 @ pointing at the second half of the Thumb instruction. We
261 @ have to subtract 2.
262 ldr r2, [r0, #S_PC]
263 sub r2, r2, r1
264 str r2, [r0, #S_PC]
265 b do_undefinstr
266ENDPROC(__und_fault)
267
268 .align 5
269__und_svc:
270#ifdef CONFIG_KPROBES
271 @ If a kprobe is about to simulate a "stmdb sp..." instruction,
272 @ it obviously needs free stack space which then will belong to
273 @ the saved context.
274 svc_entry MAX_STACK_SIZE
275#else
276 svc_entry
277#endif
278
279 mov r1, #4 @ PC correction to apply
280 THUMB( tst r5, #PSR_T_BIT ) @ exception taken in Thumb mode?
281 THUMB( movne r1, #2 ) @ if so, fix up PC correction
282 mov r0, sp @ struct pt_regs *regs
283 bl __und_fault
284
285__und_svc_finish:
286 get_thread_info tsk
287 ldr r5, [sp, #S_PSR] @ Get SVC cpsr
288 svc_exit r5 @ return from exception
289 UNWIND(.fnend )
290ENDPROC(__und_svc)
291
292 .align 5
293__pabt_svc:
294 svc_entry
295 mov r2, sp @ regs
296 pabt_helper
297 svc_exit r5 @ return from exception
298 UNWIND(.fnend )
299ENDPROC(__pabt_svc)
300
301 .align 5
302__fiq_svc:
303 svc_entry trace=0
304 mov r0, sp @ struct pt_regs *regs
305 bl handle_fiq_as_nmi
306 svc_exit_via_fiq
307 UNWIND(.fnend )
308ENDPROC(__fiq_svc)
309
310/*
311 * Abort mode handlers
312 */
313
314@
315@ Taking a FIQ in abort mode is similar to taking a FIQ in SVC mode
316@ and reuses the same macros. However in abort mode we must also
317@ save/restore lr_abt and spsr_abt to make nested aborts safe.
318@
319 .align 5
320__fiq_abt:
321 svc_entry trace=0
322
323 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
324 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
325 THUMB( msr cpsr_c, r0 )
326 mov r1, lr @ Save lr_abt
327 mrs r2, spsr @ Save spsr_abt, abort is now safe
328 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
329 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
330 THUMB( msr cpsr_c, r0 )
331 stmfd sp!, {r1 - r2}
332
333 add r0, sp, #8 @ struct pt_regs *regs
334 bl handle_fiq_as_nmi
335
336 ldmfd sp!, {r1 - r2}
337 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
338 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
339 THUMB( msr cpsr_c, r0 )
340 mov lr, r1 @ Restore lr_abt, abort is unsafe
341 msr spsr_cxsf, r2 @ Restore spsr_abt
342 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
343 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
344 THUMB( msr cpsr_c, r0 )
345
346 svc_exit_via_fiq
347 UNWIND(.fnend )
348ENDPROC(__fiq_abt)
349
350/*
351 * User mode handlers
352 *
353 * EABI note: sp_svc is always 64-bit aligned here, so should PT_REGS_SIZE
354 */
355
356#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (PT_REGS_SIZE & 7)
357#error "sizeof(struct pt_regs) must be a multiple of 8"
358#endif
359
360 .macro usr_entry, trace=1, uaccess=1
361 UNWIND(.fnstart )
362 UNWIND(.cantunwind ) @ don't unwind the user space
363 sub sp, sp, #PT_REGS_SIZE
364 ARM( stmib sp, {r1 - r12} )
365 THUMB( stmia sp, {r0 - r12} )
366
367 ATRAP( mrc p15, 0, r7, c1, c0, 0)
368 ATRAP( ldr_va r8, cr_alignment)
369
370 ldmia r0, {r3 - r5}
371 add r0, sp, #S_PC @ here for interlock avoidance
372 mov r6, #-1 @ "" "" "" ""
373
374 str r3, [sp] @ save the "real" r0 copied
375 @ from the exception stack
376
377 @
378 @ We are now ready to fill in the remaining blanks on the stack:
379 @
380 @ r4 - lr_<exception>, already fixed up for correct return/restart
381 @ r5 - spsr_<exception>
382 @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
383 @
384 @ Also, separately save sp_usr and lr_usr
385 @
386 stmia r0, {r4 - r6}
387 ARM( stmdb r0, {sp, lr}^ )
388 THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
389
390 .if \uaccess
391 uaccess_disable ip
392 .endif
393
394 @ Enable the alignment trap while in kernel mode
395 ATRAP( teq r8, r7)
396 ATRAP( mcrne p15, 0, r8, c1, c0, 0)
397
398 reload_current r7, r8
399
400 @
401 @ Clear FP to mark the first stack frame
402 @
403 zero_fp
404
405 .if \trace
406#ifdef CONFIG_TRACE_IRQFLAGS
407 bl trace_hardirqs_off
408#endif
409 ct_user_exit save = 0
410 .endif
411 .endm
412
413 .macro kuser_cmpxchg_check
414#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS)
415#ifndef CONFIG_MMU
416#warning "NPTL on non MMU needs fixing"
417#else
418 @ Make sure our user space atomic helper is restarted
419 @ if it was interrupted in a critical region. Here we
420 @ perform a quick test inline since it should be false
421 @ 99.9999% of the time. The rest is done out of line.
422 ldr r0, =TASK_SIZE
423 cmp r4, r0
424 blhs kuser_cmpxchg64_fixup
425#endif
426#endif
427 .endm
428
429 .align 5
430__dabt_usr:
431 usr_entry uaccess=0
432 kuser_cmpxchg_check
433 mov r2, sp
434 dabt_helper
435 b ret_from_exception
436 UNWIND(.fnend )
437ENDPROC(__dabt_usr)
438
439 .align 5
440__irq_usr:
441 usr_entry
442 kuser_cmpxchg_check
443 irq_handler from_user=1
444 get_thread_info tsk
445 mov why, #0
446 b ret_to_user_from_irq
447 UNWIND(.fnend )
448ENDPROC(__irq_usr)
449
450 .ltorg
451
452 .align 5
453__und_usr:
454 usr_entry uaccess=0
455
456 @ IRQs must be enabled before attempting to read the instruction from
457 @ user space since that could cause a page/translation fault if the
458 @ page table was modified by another CPU.
459 enable_irq
460
461 tst r5, #PSR_T_BIT @ Thumb mode?
462 mov r1, #2 @ set insn size to 2 for Thumb
463 bne 0f @ handle as Thumb undef exception
464#ifdef CONFIG_FPE_NWFPE
465 adr r9, ret_from_exception
466 bl call_fpe @ returns via R9 on success
467#endif
468 mov r1, #4 @ set insn size to 4 for ARM
4690: mov r0, sp
470 uaccess_disable ip
471 bl __und_fault
472 b ret_from_exception
473 UNWIND(.fnend)
474ENDPROC(__und_usr)
475
476 .align 5
477__pabt_usr:
478 usr_entry
479 mov r2, sp @ regs
480 pabt_helper
481 UNWIND(.fnend )
482 /* fall through */
483/*
484 * This is the return code to user mode for abort handlers
485 */
486ENTRY(ret_from_exception)
487 UNWIND(.fnstart )
488 UNWIND(.cantunwind )
489 get_thread_info tsk
490 mov why, #0
491 b ret_to_user
492 UNWIND(.fnend )
493ENDPROC(__pabt_usr)
494ENDPROC(ret_from_exception)
495
496 .align 5
497__fiq_usr:
498 usr_entry trace=0
499 kuser_cmpxchg_check
500 mov r0, sp @ struct pt_regs *regs
501 bl handle_fiq_as_nmi
502 get_thread_info tsk
503 restore_user_regs fast = 0, offset = 0
504 UNWIND(.fnend )
505ENDPROC(__fiq_usr)
506
507/*
508 * Register switch for ARMv3 and ARMv4 processors
509 * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
510 * previous and next are guaranteed not to be the same.
511 */
512ENTRY(__switch_to)
513 UNWIND(.fnstart )
514 UNWIND(.cantunwind )
515 add ip, r1, #TI_CPU_SAVE
516 ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
517 THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
518 THUMB( str sp, [ip], #4 )
519 THUMB( str lr, [ip], #4 )
520 ldr r4, [r2, #TI_TP_VALUE]
521 ldr r5, [r2, #TI_TP_VALUE + 4]
522#ifdef CONFIG_CPU_USE_DOMAINS
523 mrc p15, 0, r6, c3, c0, 0 @ Get domain register
524 str r6, [r1, #TI_CPU_DOMAIN] @ Save old domain register
525 ldr r6, [r2, #TI_CPU_DOMAIN]
526#endif
527 switch_tls r1, r4, r5, r3, r7
528#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
529 !defined(CONFIG_STACKPROTECTOR_PER_TASK)
530 ldr r8, =__stack_chk_guard
531 .if (TSK_STACK_CANARY > IMM12_MASK)
532 add r9, r2, #TSK_STACK_CANARY & ~IMM12_MASK
533 ldr r9, [r9, #TSK_STACK_CANARY & IMM12_MASK]
534 .else
535 ldr r9, [r2, #TSK_STACK_CANARY & IMM12_MASK]
536 .endif
537#endif
538 mov r7, r2 @ Preserve 'next'
539#ifdef CONFIG_CPU_USE_DOMAINS
540 mcr p15, 0, r6, c3, c0, 0 @ Set domain register
541#endif
542 mov r5, r0
543 add r4, r2, #TI_CPU_SAVE
544 ldr r0, =thread_notify_head
545 mov r1, #THREAD_NOTIFY_SWITCH
546 bl atomic_notifier_call_chain
547#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
548 !defined(CONFIG_STACKPROTECTOR_PER_TASK)
549 str r9, [r8]
550#endif
551 mov r0, r5
552#if !defined(CONFIG_THUMB2_KERNEL) && !defined(CONFIG_VMAP_STACK)
553 set_current r7, r8
554 ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
555#else
556 mov r1, r7
557 ldmia r4, {r4 - sl, fp, ip, lr} @ Load all regs saved previously
558#ifdef CONFIG_VMAP_STACK
559 @
560 @ Do a dummy read from the new stack while running from the old one so
561 @ that we can rely on do_translation_fault() to fix up any stale PMD
562 @ entries covering the vmalloc region.
563 @
564 ldr r2, [ip]
565#ifdef CONFIG_KASAN_VMALLOC
566 @ Also dummy read from the KASAN shadow memory for the new stack if we
567 @ are using KASAN
568 mov_l r2, KASAN_SHADOW_OFFSET
569 add r2, r2, ip, lsr #KASAN_SHADOW_SCALE_SHIFT
570 ldr r2, [r2]
571#endif
572#endif
573
574 @ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
575 @ effectuates the task switch, as that is what causes the observable
576 @ values of current and current_thread_info to change. When
577 @ CONFIG_THREAD_INFO_IN_TASK=y, setting current (and therefore
578 @ current_thread_info) is done explicitly, and the update of SP just
579 @ switches us to another stack, with few other side effects. In order
580 @ to prevent this distinction from causing any inconsistencies, let's
581 @ keep the 'set_current' call as close as we can to the update of SP.
582 set_current r1, r2
583 mov sp, ip
584 ret lr
585#endif
586 UNWIND(.fnend )
587ENDPROC(__switch_to)
588
589#ifdef CONFIG_VMAP_STACK
590 .text
591 .align 2
592__bad_stack:
593 @
594 @ We've just detected an overflow. We need to load the address of this
595 @ CPU's overflow stack into the stack pointer register. We have only one
596 @ scratch register so let's use a sequence of ADDs including one
597 @ involving the PC, and decorate them with PC-relative group
598 @ relocations. As these are ARM only, switch to ARM mode first.
599 @
600 @ We enter here with IP clobbered and its value stashed on the mode
601 @ stack.
602 @
603THUMB( bx pc )
604THUMB( nop )
605THUMB( .arm )
606 ldr_this_cpu_armv6 ip, overflow_stack_ptr
607
608 str sp, [ip, #-4]! @ Preserve original SP value
609 mov sp, ip @ Switch to overflow stack
610 pop {ip} @ Original SP in IP
611
612#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
613 mov ip, ip @ mov expected by unwinder
614 push {fp, ip, lr, pc} @ GCC flavor frame record
615#else
616 str ip, [sp, #-8]! @ store original SP
617 push {fpreg, lr} @ Clang flavor frame record
618#endif
619UNWIND( ldr ip, [r0, #4] ) @ load exception LR
620UNWIND( str ip, [sp, #12] ) @ store in the frame record
621 ldr ip, [r0, #12] @ reload IP
622
623 @ Store the original GPRs to the new stack.
624 svc_entry uaccess=0, overflow_check=0
625
626UNWIND( .save {sp, pc} )
627UNWIND( .save {fpreg, lr} )
628UNWIND( .setfp fpreg, sp )
629
630 ldr fpreg, [sp, #S_SP] @ Add our frame record
631 @ to the linked list
632#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
633 ldr r1, [fp, #4] @ reload SP at entry
634 add fp, fp, #12
635#else
636 ldr r1, [fpreg, #8]
637#endif
638 str r1, [sp, #S_SP] @ store in pt_regs
639
640 @ Stash the regs for handle_bad_stack
641 mov r0, sp
642
643 @ Time to die
644 bl handle_bad_stack
645 nop
646UNWIND( .fnend )
647ENDPROC(__bad_stack)
648#endif
649
650 __INIT
651
652/*
653 * User helpers.
654 *
655 * Each segment is 32-byte aligned and will be moved to the top of the high
656 * vector page. New segments (if ever needed) must be added in front of
657 * existing ones. This mechanism should be used only for things that are
658 * really small and justified, and not be abused freely.
659 *
660 * See Documentation/arch/arm/kernel_user_helpers.rst for formal definitions.
661 */
662 THUMB( .arm )
663
664 .macro usr_ret, reg
665#ifdef CONFIG_ARM_THUMB
666 bx \reg
667#else
668 ret \reg
669#endif
670 .endm
671
672 .macro kuser_pad, sym, size
673 .if (. - \sym) & 3
674 .rept 4 - (. - \sym) & 3
675 .byte 0
676 .endr
677 .endif
678 .rept (\size - (. - \sym)) / 4
679 .word 0xe7fddef1
680 .endr
681 .endm
682
683#ifdef CONFIG_KUSER_HELPERS
684 .align 5
685 .globl __kuser_helper_start
686__kuser_helper_start:
687
688/*
689 * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular
690 * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point.
691 */
692
693__kuser_cmpxchg64: @ 0xffff0f60
694
695#if defined(CONFIG_CPU_32v6K)
696
697 stmfd sp!, {r4, r5, r6, r7}
698 ldrd r4, r5, [r0] @ load old val
699 ldrd r6, r7, [r1] @ load new val
700 smp_dmb arm
7011: ldrexd r0, r1, [r2] @ load current val
702 eors r3, r0, r4 @ compare with oldval (1)
703 eorseq r3, r1, r5 @ compare with oldval (2)
704 strexdeq r3, r6, r7, [r2] @ store newval if eq
705 teqeq r3, #1 @ success?
706 beq 1b @ if no then retry
707 smp_dmb arm
708 rsbs r0, r3, #0 @ set returned val and C flag
709 ldmfd sp!, {r4, r5, r6, r7}
710 usr_ret lr
711
712#elif !defined(CONFIG_SMP)
713
714#ifdef CONFIG_MMU
715
716 /*
717 * The only thing that can break atomicity in this cmpxchg64
718 * implementation is either an IRQ or a data abort exception
719 * causing another process/thread to be scheduled in the middle of
720 * the critical sequence. The same strategy as for cmpxchg is used.
721 */
722 stmfd sp!, {r4, r5, r6, lr}
723 ldmia r0, {r4, r5} @ load old val
724 ldmia r1, {r6, lr} @ load new val
7251: ldmia r2, {r0, r1} @ load current val
726 eors r3, r0, r4 @ compare with oldval (1)
727 eorseq r3, r1, r5 @ compare with oldval (2)
7282: stmiaeq r2, {r6, lr} @ store newval if eq
729 rsbs r0, r3, #0 @ set return val and C flag
730 ldmfd sp!, {r4, r5, r6, pc}
731
732 .text
733kuser_cmpxchg64_fixup:
734 @ Called from kuser_cmpxchg_fixup.
735 @ r4 = address of interrupted insn (must be preserved).
736 @ sp = saved regs. r7 and r8 are clobbered.
737 @ 1b = first critical insn, 2b = last critical insn.
738 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
739 mov r7, #0xffff0fff
740 sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
741 subs r8, r4, r7
742 rsbscs r8, r8, #(2b - 1b)
743 strcs r7, [sp, #S_PC]
744#if __LINUX_ARM_ARCH__ < 6
745 bcc kuser_cmpxchg32_fixup
746#endif
747 ret lr
748 .previous
749
750#else
751#warning "NPTL on non MMU needs fixing"
752 mov r0, #-1
753 adds r0, r0, #0
754 usr_ret lr
755#endif
756
757#else
758#error "incoherent kernel configuration"
759#endif
760
761 kuser_pad __kuser_cmpxchg64, 64
762
763__kuser_memory_barrier: @ 0xffff0fa0
764 smp_dmb arm
765 usr_ret lr
766
767 kuser_pad __kuser_memory_barrier, 32
768
769__kuser_cmpxchg: @ 0xffff0fc0
770
771#if __LINUX_ARM_ARCH__ < 6
772
773#ifdef CONFIG_MMU
774
775 /*
776 * The only thing that can break atomicity in this cmpxchg
777 * implementation is either an IRQ or a data abort exception
778 * causing another process/thread to be scheduled in the middle
779 * of the critical sequence. To prevent this, code is added to
780 * the IRQ and data abort exception handlers to set the pc back
781 * to the beginning of the critical section if it is found to be
782 * within that critical section (see kuser_cmpxchg_fixup).
783 */
7841: ldr r3, [r2] @ load current val
785 subs r3, r3, r0 @ compare with oldval
7862: streq r1, [r2] @ store newval if eq
787 rsbs r0, r3, #0 @ set return val and C flag
788 usr_ret lr
789
790 .text
791kuser_cmpxchg32_fixup:
792 @ Called from kuser_cmpxchg_check macro.
793 @ r4 = address of interrupted insn (must be preserved).
794 @ sp = saved regs. r7 and r8 are clobbered.
795 @ 1b = first critical insn, 2b = last critical insn.
796 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
797 mov r7, #0xffff0fff
798 sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
799 subs r8, r4, r7
800 rsbscs r8, r8, #(2b - 1b)
801 strcs r7, [sp, #S_PC]
802 ret lr
803 .previous
804
805#else
806#warning "NPTL on non MMU needs fixing"
807 mov r0, #-1
808 adds r0, r0, #0
809 usr_ret lr
810#endif
811
812#else
813
814 smp_dmb arm
8151: ldrex r3, [r2]
816 subs r3, r3, r0
817 strexeq r3, r1, [r2]
818 teqeq r3, #1
819 beq 1b
820 rsbs r0, r3, #0
821 /* beware -- each __kuser slot must be 8 instructions max */
822 ALT_SMP(b __kuser_memory_barrier)
823 ALT_UP(usr_ret lr)
824
825#endif
826
827 kuser_pad __kuser_cmpxchg, 32
828
829__kuser_get_tls: @ 0xffff0fe0
830 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
831 usr_ret lr
832 mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code
833 kuser_pad __kuser_get_tls, 16
834 .rep 3
835 .word 0 @ 0xffff0ff0 software TLS value, then
836 .endr @ pad up to __kuser_helper_version
837
838__kuser_helper_version: @ 0xffff0ffc
839 .word ((__kuser_helper_end - __kuser_helper_start) >> 5)
840
841 .globl __kuser_helper_end
842__kuser_helper_end:
843
844#endif
845
846 THUMB( .thumb )
847
848/*
849 * Vector stubs.
850 *
851 * This code is copied to 0xffff1000 so we can use branches in the
852 * vectors, rather than ldr's. Note that this code must not exceed
853 * a page size.
854 *
855 * Common stub entry macro:
856 * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
857 *
858 * SP points to a minimal amount of processor-private memory, the address
859 * of which is copied into r0 for the mode specific abort handler.
860 */
861 .macro vector_stub, name, mode, correction=0
862 .align 5
863#ifdef CONFIG_HARDEN_BRANCH_HISTORY
864vector_bhb_bpiall_\name:
865 mcr p15, 0, r0, c7, c5, 6 @ BPIALL
866 @ isb not needed due to "movs pc, lr" in the vector stub
867 @ which gives a "context synchronisation".
868#endif
869
870vector_\name:
871 .if \correction
872 sub lr, lr, #\correction
873 .endif
874
875 @ Save r0, lr_<exception> (parent PC)
876 stmia sp, {r0, lr} @ save r0, lr
877
878 @ Save spsr_<exception> (parent CPSR)
879.Lvec_\name:
880 mrs lr, spsr
881 str lr, [sp, #8] @ save spsr
882
883 @
884 @ Prepare for SVC32 mode. IRQs remain disabled.
885 @
886 mrs r0, cpsr
887 eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
888 msr spsr_cxsf, r0
889
890 @
891 @ the branch table must immediately follow this code
892 @
893 and lr, lr, #0x0f
894 THUMB( adr r0, 1f )
895 THUMB( ldr lr, [r0, lr, lsl #2] )
896 mov r0, sp
897 ARM( ldr lr, [pc, lr, lsl #2] )
898 movs pc, lr @ branch to handler in SVC mode
899ENDPROC(vector_\name)
900
901#ifdef CONFIG_HARDEN_BRANCH_HISTORY
902 .subsection 1
903 .align 5
904vector_bhb_loop8_\name:
905 .if \correction
906 sub lr, lr, #\correction
907 .endif
908
909 @ Save r0, lr_<exception> (parent PC)
910 stmia sp, {r0, lr}
911
912 @ bhb workaround
913 mov r0, #8
9143: W(b) . + 4
915 subs r0, r0, #1
916 bne 3b
917 dsb nsh
918 @ isb not needed due to "movs pc, lr" in the vector stub
919 @ which gives a "context synchronisation".
920 b .Lvec_\name
921ENDPROC(vector_bhb_loop8_\name)
922 .previous
923#endif
924
925 .align 2
926 @ handler addresses follow this label
9271:
928 .endm
929
930 .section .stubs, "ax", %progbits
931 @ These need to remain at the start of the section so that
932 @ they are in range of the 'SWI' entries in the vector tables
933 @ located 4k down.
934.L__vector_swi:
935 .word vector_swi
936#ifdef CONFIG_HARDEN_BRANCH_HISTORY
937.L__vector_bhb_loop8_swi:
938 .word vector_bhb_loop8_swi
939.L__vector_bhb_bpiall_swi:
940 .word vector_bhb_bpiall_swi
941#endif
942
943vector_rst:
944 ARM( swi SYS_ERROR0 )
945 THUMB( svc #0 )
946 THUMB( nop )
947 b vector_und
948
949/*
950 * Interrupt dispatcher
951 */
952 vector_stub irq, IRQ_MODE, 4
953
954 .long __irq_usr @ 0 (USR_26 / USR_32)
955 .long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
956 .long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
957 .long __irq_svc @ 3 (SVC_26 / SVC_32)
958 .long __irq_invalid @ 4
959 .long __irq_invalid @ 5
960 .long __irq_invalid @ 6
961 .long __irq_invalid @ 7
962 .long __irq_invalid @ 8
963 .long __irq_invalid @ 9
964 .long __irq_invalid @ a
965 .long __irq_invalid @ b
966 .long __irq_invalid @ c
967 .long __irq_invalid @ d
968 .long __irq_invalid @ e
969 .long __irq_invalid @ f
970
971/*
972 * Data abort dispatcher
973 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
974 */
975 vector_stub dabt, ABT_MODE, 8
976
977 .long __dabt_usr @ 0 (USR_26 / USR_32)
978 .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
979 .long __dabt_invalid @ 2 (IRQ_26 / IRQ_32)
980 .long __dabt_svc @ 3 (SVC_26 / SVC_32)
981 .long __dabt_invalid @ 4
982 .long __dabt_invalid @ 5
983 .long __dabt_invalid @ 6
984 .long __dabt_invalid @ 7
985 .long __dabt_invalid @ 8
986 .long __dabt_invalid @ 9
987 .long __dabt_invalid @ a
988 .long __dabt_invalid @ b
989 .long __dabt_invalid @ c
990 .long __dabt_invalid @ d
991 .long __dabt_invalid @ e
992 .long __dabt_invalid @ f
993
994/*
995 * Prefetch abort dispatcher
996 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
997 */
998 vector_stub pabt, ABT_MODE, 4
999
1000 .long __pabt_usr @ 0 (USR_26 / USR_32)
1001 .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
1002 .long __pabt_invalid @ 2 (IRQ_26 / IRQ_32)
1003 .long __pabt_svc @ 3 (SVC_26 / SVC_32)
1004 .long __pabt_invalid @ 4
1005 .long __pabt_invalid @ 5
1006 .long __pabt_invalid @ 6
1007 .long __pabt_invalid @ 7
1008 .long __pabt_invalid @ 8
1009 .long __pabt_invalid @ 9
1010 .long __pabt_invalid @ a
1011 .long __pabt_invalid @ b
1012 .long __pabt_invalid @ c
1013 .long __pabt_invalid @ d
1014 .long __pabt_invalid @ e
1015 .long __pabt_invalid @ f
1016
1017/*
1018 * Undef instr entry dispatcher
1019 * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
1020 */
1021 vector_stub und, UND_MODE
1022
1023 .long __und_usr @ 0 (USR_26 / USR_32)
1024 .long __und_invalid @ 1 (FIQ_26 / FIQ_32)
1025 .long __und_invalid @ 2 (IRQ_26 / IRQ_32)
1026 .long __und_svc @ 3 (SVC_26 / SVC_32)
1027 .long __und_invalid @ 4
1028 .long __und_invalid @ 5
1029 .long __und_invalid @ 6
1030 .long __und_invalid @ 7
1031 .long __und_invalid @ 8
1032 .long __und_invalid @ 9
1033 .long __und_invalid @ a
1034 .long __und_invalid @ b
1035 .long __und_invalid @ c
1036 .long __und_invalid @ d
1037 .long __und_invalid @ e
1038 .long __und_invalid @ f
1039
1040 .align 5
1041
1042/*=============================================================================
1043 * Address exception handler
1044 *-----------------------------------------------------------------------------
1045 * These aren't too critical.
1046 * (they're not supposed to happen, and won't happen in 32-bit data mode).
1047 */
1048
1049vector_addrexcptn:
1050 b vector_addrexcptn
1051
1052/*=============================================================================
1053 * FIQ "NMI" handler
1054 *-----------------------------------------------------------------------------
1055 * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
1056 * systems. This must be the last vector stub, so lets place it in its own
1057 * subsection.
1058 */
1059 .subsection 2
1060 vector_stub fiq, FIQ_MODE, 4
1061
1062 .long __fiq_usr @ 0 (USR_26 / USR_32)
1063 .long __fiq_svc @ 1 (FIQ_26 / FIQ_32)
1064 .long __fiq_svc @ 2 (IRQ_26 / IRQ_32)
1065 .long __fiq_svc @ 3 (SVC_26 / SVC_32)
1066 .long __fiq_svc @ 4
1067 .long __fiq_svc @ 5
1068 .long __fiq_svc @ 6
1069 .long __fiq_abt @ 7
1070 .long __fiq_svc @ 8
1071 .long __fiq_svc @ 9
1072 .long __fiq_svc @ a
1073 .long __fiq_svc @ b
1074 .long __fiq_svc @ c
1075 .long __fiq_svc @ d
1076 .long __fiq_svc @ e
1077 .long __fiq_svc @ f
1078
1079 .globl vector_fiq
1080
1081 .section .vectors, "ax", %progbits
1082 RELOC_TEXT_NONE
1083 W(b) vector_rst
1084 W(b) vector_und
1085ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_swi )
1086THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_swi )
1087 W(ldr) pc, .
1088 W(b) vector_pabt
1089 W(b) vector_dabt
1090 W(b) vector_addrexcptn
1091 W(b) vector_irq
1092 W(b) vector_fiq
1093
1094#ifdef CONFIG_HARDEN_BRANCH_HISTORY
1095 .section .vectors.bhb.loop8, "ax", %progbits
1096 RELOC_TEXT_NONE
1097 W(b) vector_rst
1098 W(b) vector_bhb_loop8_und
1099ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi )
1100THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi )
1101 W(ldr) pc, .
1102 W(b) vector_bhb_loop8_pabt
1103 W(b) vector_bhb_loop8_dabt
1104 W(b) vector_addrexcptn
1105 W(b) vector_bhb_loop8_irq
1106 W(b) vector_bhb_loop8_fiq
1107
1108 .section .vectors.bhb.bpiall, "ax", %progbits
1109 RELOC_TEXT_NONE
1110 W(b) vector_rst
1111 W(b) vector_bhb_bpiall_und
1112ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi )
1113THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi )
1114 W(ldr) pc, .
1115 W(b) vector_bhb_bpiall_pabt
1116 W(b) vector_bhb_bpiall_dabt
1117 W(b) vector_addrexcptn
1118 W(b) vector_bhb_bpiall_irq
1119 W(b) vector_bhb_bpiall_fiq
1120#endif
1121
1122 .data
1123 .align 2
1124
1125 .globl cr_alignment
1126cr_alignment:
1127 .space 4
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/kernel/entry-armv.S
4 *
5 * Copyright (C) 1996,1997,1998 Russell King.
6 * ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
7 * nommu support by Hyok S. Choi (hyok.choi@samsung.com)
8 *
9 * Low-level vector interface routines
10 *
11 * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction
12 * that causes it to save wrong values... Be aware!
13 */
14
15#include <linux/init.h>
16
17#include <asm/assembler.h>
18#include <asm/memory.h>
19#include <asm/glue-df.h>
20#include <asm/glue-pf.h>
21#include <asm/vfpmacros.h>
22#include <asm/thread_notify.h>
23#include <asm/unwind.h>
24#include <asm/unistd.h>
25#include <asm/tls.h>
26#include <asm/system_info.h>
27#include <asm/uaccess-asm.h>
28
29#include "entry-header.S"
30#include <asm/probes.h>
31
32/*
33 * Interrupt handling.
34 */
35 .macro irq_handler, from_user:req
36 mov r1, sp
37 ldr_this_cpu r2, irq_stack_ptr, r2, r3
38 .if \from_user == 0
39 @
40 @ If we took the interrupt while running in the kernel, we may already
41 @ be using the IRQ stack, so revert to the original value in that case.
42 @
43 subs r3, r2, r1 @ SP above bottom of IRQ stack?
44 rsbscs r3, r3, #THREAD_SIZE @ ... and below the top?
45#ifdef CONFIG_VMAP_STACK
46 ldr_va r3, high_memory, cc @ End of the linear region
47 cmpcc r3, r1 @ Stack pointer was below it?
48#endif
49 bcc 0f @ If not, switch to the IRQ stack
50 mov r0, r1
51 bl generic_handle_arch_irq
52 b 1f
530:
54 .endif
55
56 mov_l r0, generic_handle_arch_irq
57 bl call_with_stack
581:
59 .endm
60
61 .macro pabt_helper
62 @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
63#ifdef MULTI_PABORT
64 ldr_va ip, processor, offset=PROCESSOR_PABT_FUNC
65 bl_r ip
66#else
67 bl CPU_PABORT_HANDLER
68#endif
69 .endm
70
71 .macro dabt_helper
72
73 @
74 @ Call the processor-specific abort handler:
75 @
76 @ r2 - pt_regs
77 @ r4 - aborted context pc
78 @ r5 - aborted context psr
79 @
80 @ The abort handler must return the aborted address in r0, and
81 @ the fault status register in r1. r9 must be preserved.
82 @
83#ifdef MULTI_DABORT
84 ldr_va ip, processor, offset=PROCESSOR_DABT_FUNC
85 bl_r ip
86#else
87 bl CPU_DABORT_HANDLER
88#endif
89 .endm
90
91 .section .entry.text,"ax",%progbits
92
93/*
94 * Invalid mode handlers
95 */
96 .macro inv_entry, reason
97 sub sp, sp, #PT_REGS_SIZE
98 ARM( stmib sp, {r1 - lr} )
99 THUMB( stmia sp, {r0 - r12} )
100 THUMB( str sp, [sp, #S_SP] )
101 THUMB( str lr, [sp, #S_LR] )
102 mov r1, #\reason
103 .endm
104
105__pabt_invalid:
106 inv_entry BAD_PREFETCH
107 b common_invalid
108ENDPROC(__pabt_invalid)
109
110__dabt_invalid:
111 inv_entry BAD_DATA
112 b common_invalid
113ENDPROC(__dabt_invalid)
114
115__irq_invalid:
116 inv_entry BAD_IRQ
117 b common_invalid
118ENDPROC(__irq_invalid)
119
120__und_invalid:
121 inv_entry BAD_UNDEFINSTR
122
123 @
124 @ XXX fall through to common_invalid
125 @
126
127@
128@ common_invalid - generic code for failed exception (re-entrant version of handlers)
129@
130common_invalid:
131 zero_fp
132
133 ldmia r0, {r4 - r6}
134 add r0, sp, #S_PC @ here for interlock avoidance
135 mov r7, #-1 @ "" "" "" ""
136 str r4, [sp] @ save preserved r0
137 stmia r0, {r5 - r7} @ lr_<exception>,
138 @ cpsr_<exception>, "old_r0"
139
140 mov r0, sp
141 b bad_mode
142ENDPROC(__und_invalid)
143
144/*
145 * SVC mode handlers
146 */
147
148#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
149#define SPFIX(code...) code
150#else
151#define SPFIX(code...)
152#endif
153
154 .macro svc_entry, stack_hole=0, trace=1, uaccess=1, overflow_check=1
155 UNWIND(.fnstart )
156 sub sp, sp, #(SVC_REGS_SIZE + \stack_hole)
157 THUMB( add sp, r1 ) @ get SP in a GPR without
158 THUMB( sub r1, sp, r1 ) @ using a temp register
159
160 .if \overflow_check
161 UNWIND(.save {r0 - pc} )
162 do_overflow_check (SVC_REGS_SIZE + \stack_hole)
163 .endif
164
165#ifdef CONFIG_THUMB2_KERNEL
166 tst r1, #4 @ test stack pointer alignment
167 sub r1, sp, r1 @ restore original R1
168 sub sp, r1 @ restore original SP
169#else
170 SPFIX( tst sp, #4 )
171#endif
172 SPFIX( subne sp, sp, #4 )
173
174 ARM( stmib sp, {r1 - r12} )
175 THUMB( stmia sp, {r0 - r12} ) @ No STMIB in Thumb-2
176
177 ldmia r0, {r3 - r5}
178 add r7, sp, #S_SP @ here for interlock avoidance
179 mov r6, #-1 @ "" "" "" ""
180 add r2, sp, #(SVC_REGS_SIZE + \stack_hole)
181 SPFIX( addne r2, r2, #4 )
182 str r3, [sp] @ save the "real" r0 copied
183 @ from the exception stack
184
185 mov r3, lr
186
187 @
188 @ We are now ready to fill in the remaining blanks on the stack:
189 @
190 @ r2 - sp_svc
191 @ r3 - lr_svc
192 @ r4 - lr_<exception>, already fixed up for correct return/restart
193 @ r5 - spsr_<exception>
194 @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
195 @
196 stmia r7, {r2 - r6}
197
198 get_thread_info tsk
199 uaccess_entry tsk, r0, r1, r2, \uaccess
200
201 .if \trace
202#ifdef CONFIG_TRACE_IRQFLAGS
203 bl trace_hardirqs_off
204#endif
205 .endif
206 .endm
207
208 .align 5
209__dabt_svc:
210 svc_entry uaccess=0
211 mov r2, sp
212 dabt_helper
213 THUMB( ldr r5, [sp, #S_PSR] ) @ potentially updated CPSR
214 svc_exit r5 @ return from exception
215 UNWIND(.fnend )
216ENDPROC(__dabt_svc)
217
218 .align 5
219__irq_svc:
220 svc_entry
221 irq_handler from_user=0
222
223#ifdef CONFIG_PREEMPTION
224 ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
225 ldr r0, [tsk, #TI_FLAGS] @ get flags
226 teq r8, #0 @ if preempt count != 0
227 movne r0, #0 @ force flags to 0
228 tst r0, #_TIF_NEED_RESCHED
229 blne svc_preempt
230#endif
231
232 svc_exit r5, irq = 1 @ return from exception
233 UNWIND(.fnend )
234ENDPROC(__irq_svc)
235
236 .ltorg
237
238#ifdef CONFIG_PREEMPTION
239svc_preempt:
240 mov r8, lr
2411: bl preempt_schedule_irq @ irq en/disable is done inside
242 ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS
243 tst r0, #_TIF_NEED_RESCHED
244 reteq r8 @ go again
245 b 1b
246#endif
247
248__und_fault:
249 @ Correct the PC such that it is pointing at the instruction
250 @ which caused the fault. If the faulting instruction was ARM
251 @ the PC will be pointing at the next instruction, and have to
252 @ subtract 4. Otherwise, it is Thumb, and the PC will be
253 @ pointing at the second half of the Thumb instruction. We
254 @ have to subtract 2.
255 ldr r2, [r0, #S_PC]
256 sub r2, r2, r1
257 str r2, [r0, #S_PC]
258 b do_undefinstr
259ENDPROC(__und_fault)
260
261 .align 5
262__und_svc:
263#ifdef CONFIG_KPROBES
264 @ If a kprobe is about to simulate a "stmdb sp..." instruction,
265 @ it obviously needs free stack space which then will belong to
266 @ the saved context.
267 svc_entry MAX_STACK_SIZE
268#else
269 svc_entry
270#endif
271
272 mov r1, #4 @ PC correction to apply
273 THUMB( tst r5, #PSR_T_BIT ) @ exception taken in Thumb mode?
274 THUMB( movne r1, #2 ) @ if so, fix up PC correction
275 mov r0, sp @ struct pt_regs *regs
276 bl __und_fault
277
278__und_svc_finish:
279 get_thread_info tsk
280 ldr r5, [sp, #S_PSR] @ Get SVC cpsr
281 svc_exit r5 @ return from exception
282 UNWIND(.fnend )
283ENDPROC(__und_svc)
284
285 .align 5
286__pabt_svc:
287 svc_entry
288 mov r2, sp @ regs
289 pabt_helper
290 svc_exit r5 @ return from exception
291 UNWIND(.fnend )
292ENDPROC(__pabt_svc)
293
294 .align 5
295__fiq_svc:
296 svc_entry trace=0
297 mov r0, sp @ struct pt_regs *regs
298 bl handle_fiq_as_nmi
299 svc_exit_via_fiq
300 UNWIND(.fnend )
301ENDPROC(__fiq_svc)
302
303/*
304 * Abort mode handlers
305 */
306
307@
308@ Taking a FIQ in abort mode is similar to taking a FIQ in SVC mode
309@ and reuses the same macros. However in abort mode we must also
310@ save/restore lr_abt and spsr_abt to make nested aborts safe.
311@
312 .align 5
313__fiq_abt:
314 svc_entry trace=0
315
316 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
317 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
318 THUMB( msr cpsr_c, r0 )
319 mov r1, lr @ Save lr_abt
320 mrs r2, spsr @ Save spsr_abt, abort is now safe
321 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
322 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
323 THUMB( msr cpsr_c, r0 )
324 stmfd sp!, {r1 - r2}
325
326 add r0, sp, #8 @ struct pt_regs *regs
327 bl handle_fiq_as_nmi
328
329 ldmfd sp!, {r1 - r2}
330 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
331 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
332 THUMB( msr cpsr_c, r0 )
333 mov lr, r1 @ Restore lr_abt, abort is unsafe
334 msr spsr_cxsf, r2 @ Restore spsr_abt
335 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
336 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
337 THUMB( msr cpsr_c, r0 )
338
339 svc_exit_via_fiq
340 UNWIND(.fnend )
341ENDPROC(__fiq_abt)
342
343/*
344 * User mode handlers
345 *
346 * EABI note: sp_svc is always 64-bit aligned here, so should PT_REGS_SIZE
347 */
348
349#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (PT_REGS_SIZE & 7)
350#error "sizeof(struct pt_regs) must be a multiple of 8"
351#endif
352
353 .macro usr_entry, trace=1, uaccess=1
354 UNWIND(.fnstart )
355 UNWIND(.cantunwind ) @ don't unwind the user space
356 sub sp, sp, #PT_REGS_SIZE
357 ARM( stmib sp, {r1 - r12} )
358 THUMB( stmia sp, {r0 - r12} )
359
360 ATRAP( mrc p15, 0, r7, c1, c0, 0)
361 ATRAP( ldr_va r8, cr_alignment)
362
363 ldmia r0, {r3 - r5}
364 add r0, sp, #S_PC @ here for interlock avoidance
365 mov r6, #-1 @ "" "" "" ""
366
367 str r3, [sp] @ save the "real" r0 copied
368 @ from the exception stack
369
370 @
371 @ We are now ready to fill in the remaining blanks on the stack:
372 @
373 @ r4 - lr_<exception>, already fixed up for correct return/restart
374 @ r5 - spsr_<exception>
375 @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
376 @
377 @ Also, separately save sp_usr and lr_usr
378 @
379 stmia r0, {r4 - r6}
380 ARM( stmdb r0, {sp, lr}^ )
381 THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
382
383 .if \uaccess
384 uaccess_disable ip
385 .endif
386
387 @ Enable the alignment trap while in kernel mode
388 ATRAP( teq r8, r7)
389 ATRAP( mcrne p15, 0, r8, c1, c0, 0)
390
391 reload_current r7, r8
392
393 @
394 @ Clear FP to mark the first stack frame
395 @
396 zero_fp
397
398 .if \trace
399#ifdef CONFIG_TRACE_IRQFLAGS
400 bl trace_hardirqs_off
401#endif
402 ct_user_exit save = 0
403 .endif
404 .endm
405
406 .macro kuser_cmpxchg_check
407#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS)
408#ifndef CONFIG_MMU
409#warning "NPTL on non MMU needs fixing"
410#else
411 @ Make sure our user space atomic helper is restarted
412 @ if it was interrupted in a critical region. Here we
413 @ perform a quick test inline since it should be false
414 @ 99.9999% of the time. The rest is done out of line.
415 ldr r0, =TASK_SIZE
416 cmp r4, r0
417 blhs kuser_cmpxchg64_fixup
418#endif
419#endif
420 .endm
421
422 .align 5
423__dabt_usr:
424 usr_entry uaccess=0
425 kuser_cmpxchg_check
426 mov r2, sp
427 dabt_helper
428 b ret_from_exception
429 UNWIND(.fnend )
430ENDPROC(__dabt_usr)
431
432 .align 5
433__irq_usr:
434 usr_entry
435 kuser_cmpxchg_check
436 irq_handler from_user=1
437 get_thread_info tsk
438 mov why, #0
439 b ret_to_user_from_irq
440 UNWIND(.fnend )
441ENDPROC(__irq_usr)
442
443 .ltorg
444
445 .align 5
446__und_usr:
447 usr_entry uaccess=0
448
449 mov r2, r4
450 mov r3, r5
451
452 @ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
453 @ faulting instruction depending on Thumb mode.
454 @ r3 = regs->ARM_cpsr
455 @
456 @ The emulation code returns using r9 if it has emulated the
457 @ instruction, or the more conventional lr if we are to treat
458 @ this as a real undefined instruction
459 @
460 badr r9, ret_from_exception
461
462 @ IRQs must be enabled before attempting to read the instruction from
463 @ user space since that could cause a page/translation fault if the
464 @ page table was modified by another CPU.
465 enable_irq
466
467 tst r3, #PSR_T_BIT @ Thumb mode?
468 bne __und_usr_thumb
469 sub r4, r2, #4 @ ARM instr at LR - 4
4701: ldrt r0, [r4]
471 ARM_BE8(rev r0, r0) @ little endian instruction
472
473 uaccess_disable ip
474
475 @ r0 = 32-bit ARM instruction which caused the exception
476 @ r2 = PC value for the following instruction (:= regs->ARM_pc)
477 @ r4 = PC value for the faulting instruction
478 @ lr = 32-bit undefined instruction function
479 badr lr, __und_usr_fault_32
480 b call_fpe
481
482__und_usr_thumb:
483 @ Thumb instruction
484 sub r4, r2, #2 @ First half of thumb instr at LR - 2
485#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
486/*
487 * Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms
488 * can never be supported in a single kernel, this code is not applicable at
489 * all when __LINUX_ARM_ARCH__ < 6. This allows simplifying assumptions to be
490 * made about .arch directives.
491 */
492#if __LINUX_ARM_ARCH__ < 7
493/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */
494 ldr_va r5, cpu_architecture
495 cmp r5, #CPU_ARCH_ARMv7
496 blo __und_usr_fault_16 @ 16bit undefined instruction
497/*
498 * The following code won't get run unless the running CPU really is v7, so
499 * coding round the lack of ldrht on older arches is pointless. Temporarily
500 * override the assembler target arch with the minimum required instead:
501 */
502 .arch armv6t2
503#endif
5042: ldrht r5, [r4]
505ARM_BE8(rev16 r5, r5) @ little endian instruction
506 cmp r5, #0xe800 @ 32bit instruction if xx != 0
507 blo __und_usr_fault_16_pan @ 16bit undefined instruction
5083: ldrht r0, [r2]
509ARM_BE8(rev16 r0, r0) @ little endian instruction
510 uaccess_disable ip
511 add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
512 str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
513 orr r0, r0, r5, lsl #16
514 badr lr, __und_usr_fault_32
515 @ r0 = the two 16-bit Thumb instructions which caused the exception
516 @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
517 @ r4 = PC value for the first 16-bit Thumb instruction
518 @ lr = 32bit undefined instruction function
519
520#if __LINUX_ARM_ARCH__ < 7
521/* If the target arch was overridden, change it back: */
522#ifdef CONFIG_CPU_32v6K
523 .arch armv6k
524#else
525 .arch armv6
526#endif
527#endif /* __LINUX_ARM_ARCH__ < 7 */
528#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
529 b __und_usr_fault_16
530#endif
531 UNWIND(.fnend)
532ENDPROC(__und_usr)
533
534/*
535 * The out of line fixup for the ldrt instructions above.
536 */
537 .pushsection .text.fixup, "ax"
538 .align 2
5394: str r4, [sp, #S_PC] @ retry current instruction
540 ret r9
541 .popsection
542 .pushsection __ex_table,"a"
543 .long 1b, 4b
544#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
545 .long 2b, 4b
546 .long 3b, 4b
547#endif
548 .popsection
549
550/*
551 * Check whether the instruction is a co-processor instruction.
552 * If yes, we need to call the relevant co-processor handler.
553 *
554 * Note that we don't do a full check here for the co-processor
555 * instructions; all instructions with bit 27 set are well
556 * defined. The only instructions that should fault are the
557 * co-processor instructions. However, we have to watch out
558 * for the ARM6/ARM7 SWI bug.
559 *
560 * NEON is a special case that has to be handled here. Not all
561 * NEON instructions are co-processor instructions, so we have
562 * to make a special case of checking for them. Plus, there's
563 * five groups of them, so we have a table of mask/opcode pairs
564 * to check against, and if any match then we branch off into the
565 * NEON handler code.
566 *
567 * Emulators may wish to make use of the following registers:
568 * r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
569 * r2 = PC value to resume execution after successful emulation
570 * r9 = normal "successful" return address
571 * r10 = this threads thread_info structure
572 * lr = unrecognised instruction return address
573 * IRQs enabled, FIQs enabled.
574 */
575 @
576 @ Fall-through from Thumb-2 __und_usr
577 @
578#ifdef CONFIG_NEON
579 get_thread_info r10 @ get current thread
580 adr r6, .LCneon_thumb_opcodes
581 b 2f
582#endif
583call_fpe:
584 get_thread_info r10 @ get current thread
585#ifdef CONFIG_NEON
586 adr r6, .LCneon_arm_opcodes
5872: ldr r5, [r6], #4 @ mask value
588 ldr r7, [r6], #4 @ opcode bits matching in mask
589 cmp r5, #0 @ end mask?
590 beq 1f
591 and r8, r0, r5
592 cmp r8, r7 @ NEON instruction?
593 bne 2b
594 mov r7, #1
595 strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used
596 strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used
597 b do_vfp @ let VFP handler handle this
5981:
599#endif
600 tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
601 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2
602 reteq lr
603 and r8, r0, #0x00000f00 @ mask out CP number
604 mov r7, #1
605 add r6, r10, r8, lsr #8 @ add used_cp[] array offset first
606 strb r7, [r6, #TI_USED_CP] @ set appropriate used_cp[]
607#ifdef CONFIG_IWMMXT
608 @ Test if we need to give access to iWMMXt coprocessors
609 ldr r5, [r10, #TI_FLAGS]
610 rsbs r7, r8, #(1 << 8) @ CP 0 or 1 only
611 movscs r7, r5, lsr #(TIF_USING_IWMMXT + 1)
612 bcs iwmmxt_task_enable
613#endif
614 ARM( add pc, pc, r8, lsr #6 )
615 THUMB( lsr r8, r8, #6 )
616 THUMB( add pc, r8 )
617 nop
618
619 ret.w lr @ CP#0
620 W(b) do_fpe @ CP#1 (FPE)
621 W(b) do_fpe @ CP#2 (FPE)
622 ret.w lr @ CP#3
623 ret.w lr @ CP#4
624 ret.w lr @ CP#5
625 ret.w lr @ CP#6
626 ret.w lr @ CP#7
627 ret.w lr @ CP#8
628 ret.w lr @ CP#9
629#ifdef CONFIG_VFP
630 W(b) do_vfp @ CP#10 (VFP)
631 W(b) do_vfp @ CP#11 (VFP)
632#else
633 ret.w lr @ CP#10 (VFP)
634 ret.w lr @ CP#11 (VFP)
635#endif
636 ret.w lr @ CP#12
637 ret.w lr @ CP#13
638 ret.w lr @ CP#14 (Debug)
639 ret.w lr @ CP#15 (Control)
640
641#ifdef CONFIG_NEON
642 .align 6
643
644.LCneon_arm_opcodes:
645 .word 0xfe000000 @ mask
646 .word 0xf2000000 @ opcode
647
648 .word 0xff100000 @ mask
649 .word 0xf4000000 @ opcode
650
651 .word 0x00000000 @ mask
652 .word 0x00000000 @ opcode
653
654.LCneon_thumb_opcodes:
655 .word 0xef000000 @ mask
656 .word 0xef000000 @ opcode
657
658 .word 0xff100000 @ mask
659 .word 0xf9000000 @ opcode
660
661 .word 0x00000000 @ mask
662 .word 0x00000000 @ opcode
663#endif
664
665do_fpe:
666 add r10, r10, #TI_FPSTATE @ r10 = workspace
667 ldr_va pc, fp_enter, tmp=r4 @ Call FP module USR entry point
668
669/*
670 * The FP module is called with these registers set:
671 * r0 = instruction
672 * r2 = PC+4
673 * r9 = normal "successful" return address
674 * r10 = FP workspace
675 * lr = unrecognised FP instruction return address
676 */
677
678 .pushsection .data
679 .align 2
680ENTRY(fp_enter)
681 .word no_fp
682 .popsection
683
684ENTRY(no_fp)
685 ret lr
686ENDPROC(no_fp)
687
688__und_usr_fault_32:
689 mov r1, #4
690 b 1f
691__und_usr_fault_16_pan:
692 uaccess_disable ip
693__und_usr_fault_16:
694 mov r1, #2
6951: mov r0, sp
696 badr lr, ret_from_exception
697 b __und_fault
698ENDPROC(__und_usr_fault_32)
699ENDPROC(__und_usr_fault_16)
700
701 .align 5
702__pabt_usr:
703 usr_entry
704 mov r2, sp @ regs
705 pabt_helper
706 UNWIND(.fnend )
707 /* fall through */
708/*
709 * This is the return code to user mode for abort handlers
710 */
711ENTRY(ret_from_exception)
712 UNWIND(.fnstart )
713 UNWIND(.cantunwind )
714 get_thread_info tsk
715 mov why, #0
716 b ret_to_user
717 UNWIND(.fnend )
718ENDPROC(__pabt_usr)
719ENDPROC(ret_from_exception)
720
721 .align 5
722__fiq_usr:
723 usr_entry trace=0
724 kuser_cmpxchg_check
725 mov r0, sp @ struct pt_regs *regs
726 bl handle_fiq_as_nmi
727 get_thread_info tsk
728 restore_user_regs fast = 0, offset = 0
729 UNWIND(.fnend )
730ENDPROC(__fiq_usr)
731
732/*
733 * Register switch for ARMv3 and ARMv4 processors
734 * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
735 * previous and next are guaranteed not to be the same.
736 */
737ENTRY(__switch_to)
738 UNWIND(.fnstart )
739 UNWIND(.cantunwind )
740 add ip, r1, #TI_CPU_SAVE
741 ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
742 THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
743 THUMB( str sp, [ip], #4 )
744 THUMB( str lr, [ip], #4 )
745 ldr r4, [r2, #TI_TP_VALUE]
746 ldr r5, [r2, #TI_TP_VALUE + 4]
747#ifdef CONFIG_CPU_USE_DOMAINS
748 mrc p15, 0, r6, c3, c0, 0 @ Get domain register
749 str r6, [r1, #TI_CPU_DOMAIN] @ Save old domain register
750 ldr r6, [r2, #TI_CPU_DOMAIN]
751#endif
752 switch_tls r1, r4, r5, r3, r7
753#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
754 !defined(CONFIG_STACKPROTECTOR_PER_TASK)
755 ldr r8, =__stack_chk_guard
756 .if (TSK_STACK_CANARY > IMM12_MASK)
757 add r9, r2, #TSK_STACK_CANARY & ~IMM12_MASK
758 ldr r9, [r9, #TSK_STACK_CANARY & IMM12_MASK]
759 .else
760 ldr r9, [r2, #TSK_STACK_CANARY & IMM12_MASK]
761 .endif
762#endif
763 mov r7, r2 @ Preserve 'next'
764#ifdef CONFIG_CPU_USE_DOMAINS
765 mcr p15, 0, r6, c3, c0, 0 @ Set domain register
766#endif
767 mov r5, r0
768 add r4, r2, #TI_CPU_SAVE
769 ldr r0, =thread_notify_head
770 mov r1, #THREAD_NOTIFY_SWITCH
771 bl atomic_notifier_call_chain
772#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
773 !defined(CONFIG_STACKPROTECTOR_PER_TASK)
774 str r9, [r8]
775#endif
776 mov r0, r5
777#if !defined(CONFIG_THUMB2_KERNEL) && !defined(CONFIG_VMAP_STACK)
778 set_current r7, r8
779 ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
780#else
781 mov r1, r7
782 ldmia r4, {r4 - sl, fp, ip, lr} @ Load all regs saved previously
783#ifdef CONFIG_VMAP_STACK
784 @
785 @ Do a dummy read from the new stack while running from the old one so
786 @ that we can rely on do_translation_fault() to fix up any stale PMD
787 @ entries covering the vmalloc region.
788 @
789 ldr r2, [ip]
790#endif
791
792 @ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
793 @ effectuates the task switch, as that is what causes the observable
794 @ values of current and current_thread_info to change. When
795 @ CONFIG_THREAD_INFO_IN_TASK=y, setting current (and therefore
796 @ current_thread_info) is done explicitly, and the update of SP just
797 @ switches us to another stack, with few other side effects. In order
798 @ to prevent this distinction from causing any inconsistencies, let's
799 @ keep the 'set_current' call as close as we can to the update of SP.
800 set_current r1, r2
801 mov sp, ip
802 ret lr
803#endif
804 UNWIND(.fnend )
805ENDPROC(__switch_to)
806
807#ifdef CONFIG_VMAP_STACK
808 .text
809 .align 2
810__bad_stack:
811 @
812 @ We've just detected an overflow. We need to load the address of this
813 @ CPU's overflow stack into the stack pointer register. We have only one
814 @ scratch register so let's use a sequence of ADDs including one
815 @ involving the PC, and decorate them with PC-relative group
816 @ relocations. As these are ARM only, switch to ARM mode first.
817 @
818 @ We enter here with IP clobbered and its value stashed on the mode
819 @ stack.
820 @
821THUMB( bx pc )
822THUMB( nop )
823THUMB( .arm )
824 ldr_this_cpu_armv6 ip, overflow_stack_ptr
825
826 str sp, [ip, #-4]! @ Preserve original SP value
827 mov sp, ip @ Switch to overflow stack
828 pop {ip} @ Original SP in IP
829
830#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
831 mov ip, ip @ mov expected by unwinder
832 push {fp, ip, lr, pc} @ GCC flavor frame record
833#else
834 str ip, [sp, #-8]! @ store original SP
835 push {fpreg, lr} @ Clang flavor frame record
836#endif
837UNWIND( ldr ip, [r0, #4] ) @ load exception LR
838UNWIND( str ip, [sp, #12] ) @ store in the frame record
839 ldr ip, [r0, #12] @ reload IP
840
841 @ Store the original GPRs to the new stack.
842 svc_entry uaccess=0, overflow_check=0
843
844UNWIND( .save {sp, pc} )
845UNWIND( .save {fpreg, lr} )
846UNWIND( .setfp fpreg, sp )
847
848 ldr fpreg, [sp, #S_SP] @ Add our frame record
849 @ to the linked list
850#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
851 ldr r1, [fp, #4] @ reload SP at entry
852 add fp, fp, #12
853#else
854 ldr r1, [fpreg, #8]
855#endif
856 str r1, [sp, #S_SP] @ store in pt_regs
857
858 @ Stash the regs for handle_bad_stack
859 mov r0, sp
860
861 @ Time to die
862 bl handle_bad_stack
863 nop
864UNWIND( .fnend )
865ENDPROC(__bad_stack)
866#endif
867
868 __INIT
869
870/*
871 * User helpers.
872 *
873 * Each segment is 32-byte aligned and will be moved to the top of the high
874 * vector page. New segments (if ever needed) must be added in front of
875 * existing ones. This mechanism should be used only for things that are
876 * really small and justified, and not be abused freely.
877 *
878 * See Documentation/arm/kernel_user_helpers.rst for formal definitions.
879 */
880 THUMB( .arm )
881
882 .macro usr_ret, reg
883#ifdef CONFIG_ARM_THUMB
884 bx \reg
885#else
886 ret \reg
887#endif
888 .endm
889
890 .macro kuser_pad, sym, size
891 .if (. - \sym) & 3
892 .rept 4 - (. - \sym) & 3
893 .byte 0
894 .endr
895 .endif
896 .rept (\size - (. - \sym)) / 4
897 .word 0xe7fddef1
898 .endr
899 .endm
900
901#ifdef CONFIG_KUSER_HELPERS
902 .align 5
903 .globl __kuser_helper_start
904__kuser_helper_start:
905
906/*
907 * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular
908 * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point.
909 */
910
911__kuser_cmpxchg64: @ 0xffff0f60
912
913#if defined(CONFIG_CPU_32v6K)
914
915 stmfd sp!, {r4, r5, r6, r7}
916 ldrd r4, r5, [r0] @ load old val
917 ldrd r6, r7, [r1] @ load new val
918 smp_dmb arm
9191: ldrexd r0, r1, [r2] @ load current val
920 eors r3, r0, r4 @ compare with oldval (1)
921 eorseq r3, r1, r5 @ compare with oldval (2)
922 strexdeq r3, r6, r7, [r2] @ store newval if eq
923 teqeq r3, #1 @ success?
924 beq 1b @ if no then retry
925 smp_dmb arm
926 rsbs r0, r3, #0 @ set returned val and C flag
927 ldmfd sp!, {r4, r5, r6, r7}
928 usr_ret lr
929
930#elif !defined(CONFIG_SMP)
931
932#ifdef CONFIG_MMU
933
934 /*
935 * The only thing that can break atomicity in this cmpxchg64
936 * implementation is either an IRQ or a data abort exception
937 * causing another process/thread to be scheduled in the middle of
938 * the critical sequence. The same strategy as for cmpxchg is used.
939 */
940 stmfd sp!, {r4, r5, r6, lr}
941 ldmia r0, {r4, r5} @ load old val
942 ldmia r1, {r6, lr} @ load new val
9431: ldmia r2, {r0, r1} @ load current val
944 eors r3, r0, r4 @ compare with oldval (1)
945 eorseq r3, r1, r5 @ compare with oldval (2)
9462: stmiaeq r2, {r6, lr} @ store newval if eq
947 rsbs r0, r3, #0 @ set return val and C flag
948 ldmfd sp!, {r4, r5, r6, pc}
949
950 .text
951kuser_cmpxchg64_fixup:
952 @ Called from kuser_cmpxchg_fixup.
953 @ r4 = address of interrupted insn (must be preserved).
954 @ sp = saved regs. r7 and r8 are clobbered.
955 @ 1b = first critical insn, 2b = last critical insn.
956 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
957 mov r7, #0xffff0fff
958 sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
959 subs r8, r4, r7
960 rsbscs r8, r8, #(2b - 1b)
961 strcs r7, [sp, #S_PC]
962#if __LINUX_ARM_ARCH__ < 6
963 bcc kuser_cmpxchg32_fixup
964#endif
965 ret lr
966 .previous
967
968#else
969#warning "NPTL on non MMU needs fixing"
970 mov r0, #-1
971 adds r0, r0, #0
972 usr_ret lr
973#endif
974
975#else
976#error "incoherent kernel configuration"
977#endif
978
979 kuser_pad __kuser_cmpxchg64, 64
980
981__kuser_memory_barrier: @ 0xffff0fa0
982 smp_dmb arm
983 usr_ret lr
984
985 kuser_pad __kuser_memory_barrier, 32
986
987__kuser_cmpxchg: @ 0xffff0fc0
988
989#if __LINUX_ARM_ARCH__ < 6
990
991#ifdef CONFIG_MMU
992
993 /*
994 * The only thing that can break atomicity in this cmpxchg
995 * implementation is either an IRQ or a data abort exception
996 * causing another process/thread to be scheduled in the middle
997 * of the critical sequence. To prevent this, code is added to
998 * the IRQ and data abort exception handlers to set the pc back
999 * to the beginning of the critical section if it is found to be
1000 * within that critical section (see kuser_cmpxchg_fixup).
1001 */
10021: ldr r3, [r2] @ load current val
1003 subs r3, r3, r0 @ compare with oldval
10042: streq r1, [r2] @ store newval if eq
1005 rsbs r0, r3, #0 @ set return val and C flag
1006 usr_ret lr
1007
1008 .text
1009kuser_cmpxchg32_fixup:
1010 @ Called from kuser_cmpxchg_check macro.
1011 @ r4 = address of interrupted insn (must be preserved).
1012 @ sp = saved regs. r7 and r8 are clobbered.
1013 @ 1b = first critical insn, 2b = last critical insn.
1014 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
1015 mov r7, #0xffff0fff
1016 sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
1017 subs r8, r4, r7
1018 rsbscs r8, r8, #(2b - 1b)
1019 strcs r7, [sp, #S_PC]
1020 ret lr
1021 .previous
1022
1023#else
1024#warning "NPTL on non MMU needs fixing"
1025 mov r0, #-1
1026 adds r0, r0, #0
1027 usr_ret lr
1028#endif
1029
1030#else
1031
1032 smp_dmb arm
10331: ldrex r3, [r2]
1034 subs r3, r3, r0
1035 strexeq r3, r1, [r2]
1036 teqeq r3, #1
1037 beq 1b
1038 rsbs r0, r3, #0
1039 /* beware -- each __kuser slot must be 8 instructions max */
1040 ALT_SMP(b __kuser_memory_barrier)
1041 ALT_UP(usr_ret lr)
1042
1043#endif
1044
1045 kuser_pad __kuser_cmpxchg, 32
1046
1047__kuser_get_tls: @ 0xffff0fe0
1048 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
1049 usr_ret lr
1050 mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code
1051 kuser_pad __kuser_get_tls, 16
1052 .rep 3
1053 .word 0 @ 0xffff0ff0 software TLS value, then
1054 .endr @ pad up to __kuser_helper_version
1055
1056__kuser_helper_version: @ 0xffff0ffc
1057 .word ((__kuser_helper_end - __kuser_helper_start) >> 5)
1058
1059 .globl __kuser_helper_end
1060__kuser_helper_end:
1061
1062#endif
1063
1064 THUMB( .thumb )
1065
1066/*
1067 * Vector stubs.
1068 *
1069 * This code is copied to 0xffff1000 so we can use branches in the
1070 * vectors, rather than ldr's. Note that this code must not exceed
1071 * a page size.
1072 *
1073 * Common stub entry macro:
1074 * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
1075 *
1076 * SP points to a minimal amount of processor-private memory, the address
1077 * of which is copied into r0 for the mode specific abort handler.
1078 */
1079 .macro vector_stub, name, mode, correction=0
1080 .align 5
1081#ifdef CONFIG_HARDEN_BRANCH_HISTORY
1082vector_bhb_bpiall_\name:
1083 mcr p15, 0, r0, c7, c5, 6 @ BPIALL
1084 @ isb not needed due to "movs pc, lr" in the vector stub
1085 @ which gives a "context synchronisation".
1086#endif
1087
1088vector_\name:
1089 .if \correction
1090 sub lr, lr, #\correction
1091 .endif
1092
1093 @ Save r0, lr_<exception> (parent PC)
1094 stmia sp, {r0, lr} @ save r0, lr
1095
1096 @ Save spsr_<exception> (parent CPSR)
1097.Lvec_\name:
1098 mrs lr, spsr
1099 str lr, [sp, #8] @ save spsr
1100
1101 @
1102 @ Prepare for SVC32 mode. IRQs remain disabled.
1103 @
1104 mrs r0, cpsr
1105 eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
1106 msr spsr_cxsf, r0
1107
1108 @
1109 @ the branch table must immediately follow this code
1110 @
1111 and lr, lr, #0x0f
1112 THUMB( adr r0, 1f )
1113 THUMB( ldr lr, [r0, lr, lsl #2] )
1114 mov r0, sp
1115 ARM( ldr lr, [pc, lr, lsl #2] )
1116 movs pc, lr @ branch to handler in SVC mode
1117ENDPROC(vector_\name)
1118
1119#ifdef CONFIG_HARDEN_BRANCH_HISTORY
1120 .subsection 1
1121 .align 5
1122vector_bhb_loop8_\name:
1123 .if \correction
1124 sub lr, lr, #\correction
1125 .endif
1126
1127 @ Save r0, lr_<exception> (parent PC)
1128 stmia sp, {r0, lr}
1129
1130 @ bhb workaround
1131 mov r0, #8
11323: W(b) . + 4
1133 subs r0, r0, #1
1134 bne 3b
1135 dsb nsh
1136 @ isb not needed due to "movs pc, lr" in the vector stub
1137 @ which gives a "context synchronisation".
1138 b .Lvec_\name
1139ENDPROC(vector_bhb_loop8_\name)
1140 .previous
1141#endif
1142
1143 .align 2
1144 @ handler addresses follow this label
11451:
1146 .endm
1147
1148 .section .stubs, "ax", %progbits
1149 @ These need to remain at the start of the section so that
1150 @ they are in range of the 'SWI' entries in the vector tables
1151 @ located 4k down.
1152.L__vector_swi:
1153 .word vector_swi
1154#ifdef CONFIG_HARDEN_BRANCH_HISTORY
1155.L__vector_bhb_loop8_swi:
1156 .word vector_bhb_loop8_swi
1157.L__vector_bhb_bpiall_swi:
1158 .word vector_bhb_bpiall_swi
1159#endif
1160
1161vector_rst:
1162 ARM( swi SYS_ERROR0 )
1163 THUMB( svc #0 )
1164 THUMB( nop )
1165 b vector_und
1166
1167/*
1168 * Interrupt dispatcher
1169 */
1170 vector_stub irq, IRQ_MODE, 4
1171
1172 .long __irq_usr @ 0 (USR_26 / USR_32)
1173 .long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
1174 .long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
1175 .long __irq_svc @ 3 (SVC_26 / SVC_32)
1176 .long __irq_invalid @ 4
1177 .long __irq_invalid @ 5
1178 .long __irq_invalid @ 6
1179 .long __irq_invalid @ 7
1180 .long __irq_invalid @ 8
1181 .long __irq_invalid @ 9
1182 .long __irq_invalid @ a
1183 .long __irq_invalid @ b
1184 .long __irq_invalid @ c
1185 .long __irq_invalid @ d
1186 .long __irq_invalid @ e
1187 .long __irq_invalid @ f
1188
1189/*
1190 * Data abort dispatcher
1191 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
1192 */
1193 vector_stub dabt, ABT_MODE, 8
1194
1195 .long __dabt_usr @ 0 (USR_26 / USR_32)
1196 .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
1197 .long __dabt_invalid @ 2 (IRQ_26 / IRQ_32)
1198 .long __dabt_svc @ 3 (SVC_26 / SVC_32)
1199 .long __dabt_invalid @ 4
1200 .long __dabt_invalid @ 5
1201 .long __dabt_invalid @ 6
1202 .long __dabt_invalid @ 7
1203 .long __dabt_invalid @ 8
1204 .long __dabt_invalid @ 9
1205 .long __dabt_invalid @ a
1206 .long __dabt_invalid @ b
1207 .long __dabt_invalid @ c
1208 .long __dabt_invalid @ d
1209 .long __dabt_invalid @ e
1210 .long __dabt_invalid @ f
1211
1212/*
1213 * Prefetch abort dispatcher
1214 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
1215 */
1216 vector_stub pabt, ABT_MODE, 4
1217
1218 .long __pabt_usr @ 0 (USR_26 / USR_32)
1219 .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
1220 .long __pabt_invalid @ 2 (IRQ_26 / IRQ_32)
1221 .long __pabt_svc @ 3 (SVC_26 / SVC_32)
1222 .long __pabt_invalid @ 4
1223 .long __pabt_invalid @ 5
1224 .long __pabt_invalid @ 6
1225 .long __pabt_invalid @ 7
1226 .long __pabt_invalid @ 8
1227 .long __pabt_invalid @ 9
1228 .long __pabt_invalid @ a
1229 .long __pabt_invalid @ b
1230 .long __pabt_invalid @ c
1231 .long __pabt_invalid @ d
1232 .long __pabt_invalid @ e
1233 .long __pabt_invalid @ f
1234
1235/*
1236 * Undef instr entry dispatcher
1237 * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
1238 */
1239 vector_stub und, UND_MODE
1240
1241 .long __und_usr @ 0 (USR_26 / USR_32)
1242 .long __und_invalid @ 1 (FIQ_26 / FIQ_32)
1243 .long __und_invalid @ 2 (IRQ_26 / IRQ_32)
1244 .long __und_svc @ 3 (SVC_26 / SVC_32)
1245 .long __und_invalid @ 4
1246 .long __und_invalid @ 5
1247 .long __und_invalid @ 6
1248 .long __und_invalid @ 7
1249 .long __und_invalid @ 8
1250 .long __und_invalid @ 9
1251 .long __und_invalid @ a
1252 .long __und_invalid @ b
1253 .long __und_invalid @ c
1254 .long __und_invalid @ d
1255 .long __und_invalid @ e
1256 .long __und_invalid @ f
1257
1258 .align 5
1259
1260/*=============================================================================
1261 * Address exception handler
1262 *-----------------------------------------------------------------------------
1263 * These aren't too critical.
1264 * (they're not supposed to happen, and won't happen in 32-bit data mode).
1265 */
1266
1267vector_addrexcptn:
1268 b vector_addrexcptn
1269
1270/*=============================================================================
1271 * FIQ "NMI" handler
1272 *-----------------------------------------------------------------------------
1273 * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
1274 * systems. This must be the last vector stub, so lets place it in its own
1275 * subsection.
1276 */
1277 .subsection 2
1278 vector_stub fiq, FIQ_MODE, 4
1279
1280 .long __fiq_usr @ 0 (USR_26 / USR_32)
1281 .long __fiq_svc @ 1 (FIQ_26 / FIQ_32)
1282 .long __fiq_svc @ 2 (IRQ_26 / IRQ_32)
1283 .long __fiq_svc @ 3 (SVC_26 / SVC_32)
1284 .long __fiq_svc @ 4
1285 .long __fiq_svc @ 5
1286 .long __fiq_svc @ 6
1287 .long __fiq_abt @ 7
1288 .long __fiq_svc @ 8
1289 .long __fiq_svc @ 9
1290 .long __fiq_svc @ a
1291 .long __fiq_svc @ b
1292 .long __fiq_svc @ c
1293 .long __fiq_svc @ d
1294 .long __fiq_svc @ e
1295 .long __fiq_svc @ f
1296
1297 .globl vector_fiq
1298
1299 .section .vectors, "ax", %progbits
1300 W(b) vector_rst
1301 W(b) vector_und
1302ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_swi )
1303THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_swi )
1304 W(ldr) pc, .
1305 W(b) vector_pabt
1306 W(b) vector_dabt
1307 W(b) vector_addrexcptn
1308 W(b) vector_irq
1309 W(b) vector_fiq
1310
1311#ifdef CONFIG_HARDEN_BRANCH_HISTORY
1312 .section .vectors.bhb.loop8, "ax", %progbits
1313 W(b) vector_rst
1314 W(b) vector_bhb_loop8_und
1315ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi )
1316THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi )
1317 W(ldr) pc, .
1318 W(b) vector_bhb_loop8_pabt
1319 W(b) vector_bhb_loop8_dabt
1320 W(b) vector_addrexcptn
1321 W(b) vector_bhb_loop8_irq
1322 W(b) vector_bhb_loop8_fiq
1323
1324 .section .vectors.bhb.bpiall, "ax", %progbits
1325 W(b) vector_rst
1326 W(b) vector_bhb_bpiall_und
1327ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi )
1328THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi )
1329 W(ldr) pc, .
1330 W(b) vector_bhb_bpiall_pabt
1331 W(b) vector_bhb_bpiall_dabt
1332 W(b) vector_addrexcptn
1333 W(b) vector_bhb_bpiall_irq
1334 W(b) vector_bhb_bpiall_fiq
1335#endif
1336
1337 .data
1338 .align 2
1339
1340 .globl cr_alignment
1341cr_alignment:
1342 .space 4