Loading...
1/*
2 * "Optimize" a list of dependencies as spit out by gcc -MD
3 * for the kernel build
4 * ===========================================================================
5 *
6 * Author Kai Germaschewski
7 * Copyright 2002 by Kai Germaschewski <kai.germaschewski@gmx.de>
8 *
9 * This software may be used and distributed according to the terms
10 * of the GNU General Public License, incorporated herein by reference.
11 *
12 *
13 * Introduction:
14 *
15 * gcc produces a very nice and correct list of dependencies which
16 * tells make when to remake a file.
17 *
18 * To use this list as-is however has the drawback that virtually
19 * every file in the kernel includes autoconf.h.
20 *
21 * If the user re-runs make *config, autoconf.h will be
22 * regenerated. make notices that and will rebuild every file which
23 * includes autoconf.h, i.e. basically all files. This is extremely
24 * annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
25 *
26 * So we play the same trick that "mkdep" played before. We replace
27 * the dependency on autoconf.h by a dependency on every config
28 * option which is mentioned in any of the listed prerequisites.
29 *
30 * kconfig populates a tree in include/config/ with an empty file
31 * for each config symbol and when the configuration is updated
32 * the files representing changed config options are touched
33 * which then let make pick up the changes and the files that use
34 * the config symbols are rebuilt.
35 *
36 * So if the user changes his CONFIG_HIS_DRIVER option, only the objects
37 * which depend on "include/config/HIS_DRIVER" will be rebuilt,
38 * so most likely only his driver ;-)
39 *
40 * The idea above dates, by the way, back to Michael E Chastain, AFAIK.
41 *
42 * So to get dependencies right, there are two issues:
43 * o if any of the files the compiler read changed, we need to rebuild
44 * o if the command line given to the compile the file changed, we
45 * better rebuild as well.
46 *
47 * The former is handled by using the -MD output, the later by saving
48 * the command line used to compile the old object and comparing it
49 * to the one we would now use.
50 *
51 * Again, also this idea is pretty old and has been discussed on
52 * kbuild-devel a long time ago. I don't have a sensibly working
53 * internet connection right now, so I rather don't mention names
54 * without double checking.
55 *
56 * This code here has been based partially based on mkdep.c, which
57 * says the following about its history:
58 *
59 * Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
60 * This is a C version of syncdep.pl by Werner Almesberger.
61 *
62 *
63 * It is invoked as
64 *
65 * fixdep <depfile> <target> <cmdline>
66 *
67 * and will read the dependency file <depfile>
68 *
69 * The transformed dependency snipped is written to stdout.
70 *
71 * It first generates a line
72 *
73 * savedcmd_<target> = <cmdline>
74 *
75 * and then basically copies the .<target>.d file to stdout, in the
76 * process filtering out the dependency on autoconf.h and adding
77 * dependencies on include/config/MY_OPTION for every
78 * CONFIG_MY_OPTION encountered in any of the prerequisites.
79 *
80 * We don't even try to really parse the header files, but
81 * merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
82 * be picked up as well. It's not a problem with respect to
83 * correctness, since that can only give too many dependencies, thus
84 * we cannot miss a rebuild. Since people tend to not mention totally
85 * unrelated CONFIG_ options all over the place, it's not an
86 * efficiency problem either.
87 *
88 * (Note: it'd be easy to port over the complete mkdep state machine,
89 * but I don't think the added complexity is worth it)
90 */
91
92#include <sys/types.h>
93#include <sys/stat.h>
94#include <unistd.h>
95#include <fcntl.h>
96#include <string.h>
97#include <stdbool.h>
98#include <stdlib.h>
99#include <stdio.h>
100#include <ctype.h>
101
102#include <xalloc.h>
103
104static void usage(void)
105{
106 fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
107 exit(1);
108}
109
110struct item {
111 struct item *next;
112 unsigned int len;
113 unsigned int hash;
114 char name[];
115};
116
117#define HASHSZ 256
118static struct item *config_hashtab[HASHSZ], *file_hashtab[HASHSZ];
119
120static unsigned int strhash(const char *str, unsigned int sz)
121{
122 /* fnv32 hash */
123 unsigned int i, hash = 2166136261U;
124
125 for (i = 0; i < sz; i++)
126 hash = (hash ^ str[i]) * 0x01000193;
127 return hash;
128}
129
130/*
131 * Add a new value to the configuration string.
132 */
133static void add_to_hashtable(const char *name, int len, unsigned int hash,
134 struct item *hashtab[])
135{
136 struct item *aux;
137
138 aux = xmalloc(sizeof(*aux) + len);
139 memcpy(aux->name, name, len);
140 aux->len = len;
141 aux->hash = hash;
142 aux->next = hashtab[hash % HASHSZ];
143 hashtab[hash % HASHSZ] = aux;
144}
145
146/*
147 * Lookup a string in the hash table. If found, just return true.
148 * If not, add it to the hashtable and return false.
149 */
150static bool in_hashtable(const char *name, int len, struct item *hashtab[])
151{
152 struct item *aux;
153 unsigned int hash = strhash(name, len);
154
155 for (aux = hashtab[hash % HASHSZ]; aux; aux = aux->next) {
156 if (aux->hash == hash && aux->len == len &&
157 memcmp(aux->name, name, len) == 0)
158 return true;
159 }
160
161 add_to_hashtable(name, len, hash, hashtab);
162
163 return false;
164}
165
166/*
167 * Record the use of a CONFIG_* word.
168 */
169static void use_config(const char *m, int slen)
170{
171 if (in_hashtable(m, slen, config_hashtab))
172 return;
173
174 /* Print out a dependency path from a symbol name. */
175 printf(" $(wildcard include/config/%.*s) \\\n", slen, m);
176}
177
178/* test if s ends in sub */
179static int str_ends_with(const char *s, int slen, const char *sub)
180{
181 int sublen = strlen(sub);
182
183 if (sublen > slen)
184 return 0;
185
186 return !memcmp(s + slen - sublen, sub, sublen);
187}
188
189static void parse_config_file(const char *p)
190{
191 const char *q, *r;
192 const char *start = p;
193
194 while ((p = strstr(p, "CONFIG_"))) {
195 if (p > start && (isalnum(p[-1]) || p[-1] == '_')) {
196 p += 7;
197 continue;
198 }
199 p += 7;
200 q = p;
201 while (isalnum(*q) || *q == '_')
202 q++;
203 if (str_ends_with(p, q - p, "_MODULE"))
204 r = q - 7;
205 else
206 r = q;
207 if (r > p)
208 use_config(p, r - p);
209 p = q;
210 }
211}
212
213static void *read_file(const char *filename)
214{
215 struct stat st;
216 int fd;
217 char *buf;
218
219 fd = open(filename, O_RDONLY);
220 if (fd < 0) {
221 fprintf(stderr, "fixdep: error opening file: ");
222 perror(filename);
223 exit(2);
224 }
225 if (fstat(fd, &st) < 0) {
226 fprintf(stderr, "fixdep: error fstat'ing file: ");
227 perror(filename);
228 exit(2);
229 }
230 buf = xmalloc(st.st_size + 1);
231 if (read(fd, buf, st.st_size) != st.st_size) {
232 perror("fixdep: read");
233 exit(2);
234 }
235 buf[st.st_size] = '\0';
236 close(fd);
237
238 return buf;
239}
240
241/* Ignore certain dependencies */
242static int is_ignored_file(const char *s, int len)
243{
244 return str_ends_with(s, len, "include/generated/autoconf.h");
245}
246
247/* Do not parse these files */
248static int is_no_parse_file(const char *s, int len)
249{
250 /* rustc may list binary files in dep-info */
251 return str_ends_with(s, len, ".rlib") ||
252 str_ends_with(s, len, ".rmeta") ||
253 str_ends_with(s, len, ".so");
254}
255
256/*
257 * Important: The below generated source_foo.o and deps_foo.o variable
258 * assignments are parsed not only by make, but also by the rather simple
259 * parser in scripts/mod/sumversion.c.
260 */
261static void parse_dep_file(char *p, const char *target)
262{
263 bool saw_any_target = false;
264 bool is_target = true;
265 bool is_source = false;
266 bool need_parse;
267 char *q, saved_c;
268
269 while (*p) {
270 /* handle some special characters first. */
271 switch (*p) {
272 case '#':
273 /*
274 * skip comments.
275 * rustc may emit comments to dep-info.
276 */
277 p++;
278 while (*p != '\0' && *p != '\n') {
279 /*
280 * escaped newlines continue the comment across
281 * multiple lines.
282 */
283 if (*p == '\\')
284 p++;
285 p++;
286 }
287 continue;
288 case ' ':
289 case '\t':
290 /* skip whitespaces */
291 p++;
292 continue;
293 case '\\':
294 /*
295 * backslash/newline combinations continue the
296 * statement. Skip it just like a whitespace.
297 */
298 if (*(p + 1) == '\n') {
299 p += 2;
300 continue;
301 }
302 break;
303 case '\n':
304 /*
305 * Makefiles use a line-based syntax, where the newline
306 * is the end of a statement. After seeing a newline,
307 * we expect the next token is a target.
308 */
309 p++;
310 is_target = true;
311 continue;
312 case ':':
313 /*
314 * assume the first dependency after a colon as the
315 * source file.
316 */
317 p++;
318 is_target = false;
319 is_source = true;
320 continue;
321 }
322
323 /* find the end of the token */
324 q = p;
325 while (*q != ' ' && *q != '\t' && *q != '\n' && *q != '#' && *q != ':') {
326 if (*q == '\\') {
327 /*
328 * backslash/newline combinations work like as
329 * a whitespace, so this is the end of token.
330 */
331 if (*(q + 1) == '\n')
332 break;
333
334 /* escaped special characters */
335 if (*(q + 1) == '#' || *(q + 1) == ':') {
336 memmove(p + 1, p, q - p);
337 p++;
338 }
339
340 q++;
341 }
342
343 if (*q == '\0')
344 break;
345 q++;
346 }
347
348 /* Just discard the target */
349 if (is_target) {
350 p = q;
351 continue;
352 }
353
354 saved_c = *q;
355 *q = '\0';
356 need_parse = false;
357
358 /*
359 * Do not list the source file as dependency, so that kbuild is
360 * not confused if a .c file is rewritten into .S or vice versa.
361 * Storing it in source_* is needed for modpost to compute
362 * srcversions.
363 */
364 if (is_source) {
365 /*
366 * The DT build rule concatenates multiple dep files.
367 * When processing them, only process the first source
368 * name, which will be the original one, and ignore any
369 * other source names, which will be intermediate
370 * temporary files.
371 *
372 * rustc emits the same dependency list for each
373 * emission type. It is enough to list the source name
374 * just once.
375 */
376 if (!saw_any_target) {
377 saw_any_target = true;
378 printf("source_%s := %s\n\n", target, p);
379 printf("deps_%s := \\\n", target);
380 need_parse = true;
381 }
382 } else if (!is_ignored_file(p, q - p) &&
383 !in_hashtable(p, q - p, file_hashtab)) {
384 printf(" %s \\\n", p);
385 need_parse = true;
386 }
387
388 if (need_parse && !is_no_parse_file(p, q - p)) {
389 void *buf;
390
391 buf = read_file(p);
392 parse_config_file(buf);
393 free(buf);
394 }
395
396 is_source = false;
397 *q = saved_c;
398 p = q;
399 }
400
401 if (!saw_any_target) {
402 fprintf(stderr, "fixdep: parse error; no targets found\n");
403 exit(1);
404 }
405
406 printf("\n%s: $(deps_%s)\n\n", target, target);
407 printf("$(deps_%s):\n", target);
408}
409
410int main(int argc, char *argv[])
411{
412 const char *depfile, *target, *cmdline;
413 void *buf;
414
415 if (argc != 4)
416 usage();
417
418 depfile = argv[1];
419 target = argv[2];
420 cmdline = argv[3];
421
422 printf("savedcmd_%s := %s\n\n", target, cmdline);
423
424 buf = read_file(depfile);
425 parse_dep_file(buf, target);
426 free(buf);
427
428 fflush(stdout);
429
430 /*
431 * In the intended usage, the stdout is redirected to .*.cmd files.
432 * Call ferror() to catch errors such as "No space left on device".
433 */
434 if (ferror(stdout)) {
435 fprintf(stderr, "fixdep: not all data was written to the output\n");
436 exit(1);
437 }
438
439 return 0;
440}
1/*
2 * "Optimize" a list of dependencies as spit out by gcc -MD
3 * for the kernel build
4 * ===========================================================================
5 *
6 * Author Kai Germaschewski
7 * Copyright 2002 by Kai Germaschewski <kai.germaschewski@gmx.de>
8 *
9 * This software may be used and distributed according to the terms
10 * of the GNU General Public License, incorporated herein by reference.
11 *
12 *
13 * Introduction:
14 *
15 * gcc produces a very nice and correct list of dependencies which
16 * tells make when to remake a file.
17 *
18 * To use this list as-is however has the drawback that virtually
19 * every file in the kernel includes autoconf.h.
20 *
21 * If the user re-runs make *config, autoconf.h will be
22 * regenerated. make notices that and will rebuild every file which
23 * includes autoconf.h, i.e. basically all files. This is extremely
24 * annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
25 *
26 * So we play the same trick that "mkdep" played before. We replace
27 * the dependency on autoconf.h by a dependency on every config
28 * option which is mentioned in any of the listed prerequisites.
29 *
30 * kconfig populates a tree in include/config/ with an empty file
31 * for each config symbol and when the configuration is updated
32 * the files representing changed config options are touched
33 * which then let make pick up the changes and the files that use
34 * the config symbols are rebuilt.
35 *
36 * So if the user changes his CONFIG_HIS_DRIVER option, only the objects
37 * which depend on "include/config/his/driver.h" will be rebuilt,
38 * so most likely only his driver ;-)
39 *
40 * The idea above dates, by the way, back to Michael E Chastain, AFAIK.
41 *
42 * So to get dependencies right, there are two issues:
43 * o if any of the files the compiler read changed, we need to rebuild
44 * o if the command line given to the compile the file changed, we
45 * better rebuild as well.
46 *
47 * The former is handled by using the -MD output, the later by saving
48 * the command line used to compile the old object and comparing it
49 * to the one we would now use.
50 *
51 * Again, also this idea is pretty old and has been discussed on
52 * kbuild-devel a long time ago. I don't have a sensibly working
53 * internet connection right now, so I rather don't mention names
54 * without double checking.
55 *
56 * This code here has been based partially based on mkdep.c, which
57 * says the following about its history:
58 *
59 * Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
60 * This is a C version of syncdep.pl by Werner Almesberger.
61 *
62 *
63 * It is invoked as
64 *
65 * fixdep <depfile> <target> <cmdline>
66 *
67 * and will read the dependency file <depfile>
68 *
69 * The transformed dependency snipped is written to stdout.
70 *
71 * It first generates a line
72 *
73 * cmd_<target> = <cmdline>
74 *
75 * and then basically copies the .<target>.d file to stdout, in the
76 * process filtering out the dependency on autoconf.h and adding
77 * dependencies on include/config/my/option.h for every
78 * CONFIG_MY_OPTION encountered in any of the prerequisites.
79 *
80 * We don't even try to really parse the header files, but
81 * merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
82 * be picked up as well. It's not a problem with respect to
83 * correctness, since that can only give too many dependencies, thus
84 * we cannot miss a rebuild. Since people tend to not mention totally
85 * unrelated CONFIG_ options all over the place, it's not an
86 * efficiency problem either.
87 *
88 * (Note: it'd be easy to port over the complete mkdep state machine,
89 * but I don't think the added complexity is worth it)
90 */
91
92#include <sys/types.h>
93#include <sys/stat.h>
94#include <unistd.h>
95#include <fcntl.h>
96#include <string.h>
97#include <stdarg.h>
98#include <stdlib.h>
99#include <stdio.h>
100#include <ctype.h>
101
102static void usage(void)
103{
104 fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
105 exit(1);
106}
107
108/*
109 * In the intended usage of this program, the stdout is redirected to .*.cmd
110 * files. The return value of printf() and putchar() must be checked to catch
111 * any error, e.g. "No space left on device".
112 */
113static void xprintf(const char *format, ...)
114{
115 va_list ap;
116 int ret;
117
118 va_start(ap, format);
119 ret = vprintf(format, ap);
120 if (ret < 0) {
121 perror("fixdep");
122 exit(1);
123 }
124 va_end(ap);
125}
126
127static void xputchar(int c)
128{
129 int ret;
130
131 ret = putchar(c);
132 if (ret == EOF) {
133 perror("fixdep");
134 exit(1);
135 }
136}
137
138/*
139 * Print out a dependency path from a symbol name
140 */
141static void print_dep(const char *m, int slen, const char *dir)
142{
143 int c, prev_c = '/', i;
144
145 xprintf(" $(wildcard %s/", dir);
146 for (i = 0; i < slen; i++) {
147 c = m[i];
148 if (c == '_')
149 c = '/';
150 else
151 c = tolower(c);
152 if (c != '/' || prev_c != '/')
153 xputchar(c);
154 prev_c = c;
155 }
156 xprintf(".h) \\\n");
157}
158
159struct item {
160 struct item *next;
161 unsigned int len;
162 unsigned int hash;
163 char name[];
164};
165
166#define HASHSZ 256
167static struct item *hashtab[HASHSZ];
168
169static unsigned int strhash(const char *str, unsigned int sz)
170{
171 /* fnv32 hash */
172 unsigned int i, hash = 2166136261U;
173
174 for (i = 0; i < sz; i++)
175 hash = (hash ^ str[i]) * 0x01000193;
176 return hash;
177}
178
179/*
180 * Lookup a value in the configuration string.
181 */
182static int is_defined_config(const char *name, int len, unsigned int hash)
183{
184 struct item *aux;
185
186 for (aux = hashtab[hash % HASHSZ]; aux; aux = aux->next) {
187 if (aux->hash == hash && aux->len == len &&
188 memcmp(aux->name, name, len) == 0)
189 return 1;
190 }
191 return 0;
192}
193
194/*
195 * Add a new value to the configuration string.
196 */
197static void define_config(const char *name, int len, unsigned int hash)
198{
199 struct item *aux = malloc(sizeof(*aux) + len);
200
201 if (!aux) {
202 perror("fixdep:malloc");
203 exit(1);
204 }
205 memcpy(aux->name, name, len);
206 aux->len = len;
207 aux->hash = hash;
208 aux->next = hashtab[hash % HASHSZ];
209 hashtab[hash % HASHSZ] = aux;
210}
211
212/*
213 * Record the use of a CONFIG_* word.
214 */
215static void use_config(const char *m, int slen)
216{
217 unsigned int hash = strhash(m, slen);
218
219 if (is_defined_config(m, slen, hash))
220 return;
221
222 define_config(m, slen, hash);
223 print_dep(m, slen, "include/config");
224}
225
226/* test if s ends in sub */
227static int str_ends_with(const char *s, int slen, const char *sub)
228{
229 int sublen = strlen(sub);
230
231 if (sublen > slen)
232 return 0;
233
234 return !memcmp(s + slen - sublen, sub, sublen);
235}
236
237static void parse_config_file(const char *p)
238{
239 const char *q, *r;
240 const char *start = p;
241
242 while ((p = strstr(p, "CONFIG_"))) {
243 if (p > start && (isalnum(p[-1]) || p[-1] == '_')) {
244 p += 7;
245 continue;
246 }
247 p += 7;
248 q = p;
249 while (isalnum(*q) || *q == '_')
250 q++;
251 if (str_ends_with(p, q - p, "_MODULE"))
252 r = q - 7;
253 else
254 r = q;
255 if (r > p)
256 use_config(p, r - p);
257 p = q;
258 }
259}
260
261static void *read_file(const char *filename)
262{
263 struct stat st;
264 int fd;
265 char *buf;
266
267 fd = open(filename, O_RDONLY);
268 if (fd < 0) {
269 fprintf(stderr, "fixdep: error opening file: ");
270 perror(filename);
271 exit(2);
272 }
273 if (fstat(fd, &st) < 0) {
274 fprintf(stderr, "fixdep: error fstat'ing file: ");
275 perror(filename);
276 exit(2);
277 }
278 buf = malloc(st.st_size + 1);
279 if (!buf) {
280 perror("fixdep: malloc");
281 exit(2);
282 }
283 if (read(fd, buf, st.st_size) != st.st_size) {
284 perror("fixdep: read");
285 exit(2);
286 }
287 buf[st.st_size] = '\0';
288 close(fd);
289
290 return buf;
291}
292
293/* Ignore certain dependencies */
294static int is_ignored_file(const char *s, int len)
295{
296 return str_ends_with(s, len, "include/generated/autoconf.h") ||
297 str_ends_with(s, len, "include/generated/autoksyms.h");
298}
299
300/*
301 * Important: The below generated source_foo.o and deps_foo.o variable
302 * assignments are parsed not only by make, but also by the rather simple
303 * parser in scripts/mod/sumversion.c.
304 */
305static void parse_dep_file(char *m, const char *target)
306{
307 char *p;
308 int is_last, is_target;
309 int saw_any_target = 0;
310 int is_first_dep = 0;
311 void *buf;
312
313 while (1) {
314 /* Skip any "white space" */
315 while (*m == ' ' || *m == '\\' || *m == '\n')
316 m++;
317
318 if (!*m)
319 break;
320
321 /* Find next "white space" */
322 p = m;
323 while (*p && *p != ' ' && *p != '\\' && *p != '\n')
324 p++;
325 is_last = (*p == '\0');
326 /* Is the token we found a target name? */
327 is_target = (*(p-1) == ':');
328 /* Don't write any target names into the dependency file */
329 if (is_target) {
330 /* The /next/ file is the first dependency */
331 is_first_dep = 1;
332 } else if (!is_ignored_file(m, p - m)) {
333 *p = '\0';
334
335 /*
336 * Do not list the source file as dependency, so that
337 * kbuild is not confused if a .c file is rewritten
338 * into .S or vice versa. Storing it in source_* is
339 * needed for modpost to compute srcversions.
340 */
341 if (is_first_dep) {
342 /*
343 * If processing the concatenation of multiple
344 * dependency files, only process the first
345 * target name, which will be the original
346 * source name, and ignore any other target
347 * names, which will be intermediate temporary
348 * files.
349 */
350 if (!saw_any_target) {
351 saw_any_target = 1;
352 xprintf("source_%s := %s\n\n",
353 target, m);
354 xprintf("deps_%s := \\\n", target);
355 }
356 is_first_dep = 0;
357 } else {
358 xprintf(" %s \\\n", m);
359 }
360
361 buf = read_file(m);
362 parse_config_file(buf);
363 free(buf);
364 }
365
366 if (is_last)
367 break;
368
369 /*
370 * Start searching for next token immediately after the first
371 * "whitespace" character that follows this token.
372 */
373 m = p + 1;
374 }
375
376 if (!saw_any_target) {
377 fprintf(stderr, "fixdep: parse error; no targets found\n");
378 exit(1);
379 }
380
381 xprintf("\n%s: $(deps_%s)\n\n", target, target);
382 xprintf("$(deps_%s):\n", target);
383}
384
385int main(int argc, char *argv[])
386{
387 const char *depfile, *target, *cmdline;
388 void *buf;
389
390 if (argc != 4)
391 usage();
392
393 depfile = argv[1];
394 target = argv[2];
395 cmdline = argv[3];
396
397 xprintf("cmd_%s := %s\n\n", target, cmdline);
398
399 buf = read_file(depfile);
400 parse_dep_file(buf, target);
401 free(buf);
402
403 return 0;
404}