Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# 3Com Ethernet device configuration
4#
5
6config NET_VENDOR_3COM
7 bool "3Com devices"
8 default y
9 depends on ISA || EISA || PCI || PCMCIA
10 help
11 If you have a network (Ethernet) card belonging to this class, say Y.
12
13 Note that the answer to this question doesn't directly affect the
14 kernel: saying N will just cause the configurator to skip all
15 the questions about 3Com cards. If you say Y, you will be asked for
16 your specific card in the following questions.
17
18if NET_VENDOR_3COM
19
20config EL3
21 tristate "3c509/3c579 \"EtherLink III\" support"
22 depends on (ISA || EISA)
23 help
24 If you have a network (Ethernet) card belonging to the 3Com
25 EtherLinkIII series, say Y here.
26
27 If your card is not working you may need to use the DOS
28 setup disk to disable Plug & Play mode, and to select the default
29 media type.
30
31 To compile this driver as a module, choose M here. The module
32 will be called 3c509.
33
34config 3C515
35 tristate "3c515 ISA \"Fast EtherLink\""
36 depends on ISA && ISA_DMA_API && !PPC32
37 select NETDEV_LEGACY_INIT
38 help
39 If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
40 network card, say Y here.
41
42 To compile this driver as a module, choose M here. The module
43 will be called 3c515.
44
45config PCMCIA_3C574
46 tristate "3Com 3c574 PCMCIA support"
47 depends on PCMCIA && HAS_IOPORT
48 help
49 Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
50 (PC-card) Fast Ethernet card to your computer.
51
52 To compile this driver as a module, choose M here: the module will be
53 called 3c574_cs. If unsure, say N.
54
55config PCMCIA_3C589
56 tristate "3Com 3c589 PCMCIA support"
57 depends on PCMCIA && HAS_IOPORT
58 help
59 Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
60 (PC-card) Ethernet card to your computer.
61
62 To compile this driver as a module, choose M here: the module will be
63 called 3c589_cs. If unsure, say N.
64
65config VORTEX
66 tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
67 depends on (PCI || EISA) && HAS_IOPORT_MAP
68 select MII
69 help
70 This option enables driver support for a large number of 10Mbps and
71 10/100Mbps EISA, PCI and Cardbus 3Com network cards:
72
73 "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
74 "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
75 "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
76 "Tornado" (3c905) PCI
77 "Hurricane" (3c555/3cSOHO) PCI
78
79 If you have such a card, say Y here. More specific information is in
80 <file:Documentation/networking/device_drivers/ethernet/3com/vortex.rst>
81 and in the comments at the beginning of
82 <file:drivers/net/ethernet/3com/3c59x.c>.
83
84 To compile this support as a module, choose M here.
85
86config TYPHOON
87 tristate "3cr990 series \"Typhoon\" support"
88 depends on PCI
89 select CRC32
90 help
91 This option enables driver support for the 3cr990 series of cards:
92
93 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
94 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
95 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
96
97 If you have a network (Ethernet) card of this type, say Y here.
98
99 To compile this driver as a module, choose M here. The module
100 will be called typhoon.
101
102endif # NET_VENDOR_3COM
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# 3Com Ethernet device configuration
4#
5
6config NET_VENDOR_3COM
7 bool "3Com devices"
8 default y
9 depends on ISA || EISA || PCI || PCMCIA
10 help
11 If you have a network (Ethernet) card belonging to this class, say Y.
12
13 Note that the answer to this question doesn't directly affect the
14 kernel: saying N will just cause the configurator to skip all
15 the questions about 3Com cards. If you say Y, you will be asked for
16 your specific card in the following questions.
17
18if NET_VENDOR_3COM
19
20config EL3
21 tristate "3c509/3c579 \"EtherLink III\" support"
22 depends on (ISA || EISA)
23 help
24 If you have a network (Ethernet) card belonging to the 3Com
25 EtherLinkIII series, say Y here.
26
27 If your card is not working you may need to use the DOS
28 setup disk to disable Plug & Play mode, and to select the default
29 media type.
30
31 To compile this driver as a module, choose M here. The module
32 will be called 3c509.
33
34config 3C515
35 tristate "3c515 ISA \"Fast EtherLink\""
36 depends on ISA && ISA_DMA_API && !PPC32
37 help
38 If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
39 network card, say Y here.
40
41 To compile this driver as a module, choose M here. The module
42 will be called 3c515.
43
44config PCMCIA_3C574
45 tristate "3Com 3c574 PCMCIA support"
46 depends on PCMCIA
47 help
48 Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
49 (PC-card) Fast Ethernet card to your computer.
50
51 To compile this driver as a module, choose M here: the module will be
52 called 3c574_cs. If unsure, say N.
53
54config PCMCIA_3C589
55 tristate "3Com 3c589 PCMCIA support"
56 depends on PCMCIA
57 help
58 Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
59 (PC-card) Ethernet card to your computer.
60
61 To compile this driver as a module, choose M here: the module will be
62 called 3c589_cs. If unsure, say N.
63
64config VORTEX
65 tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
66 depends on (PCI || EISA) && HAS_IOPORT_MAP
67 select MII
68 help
69 This option enables driver support for a large number of 10Mbps and
70 10/100Mbps EISA, PCI and Cardbus 3Com network cards:
71
72 "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
73 "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
74 "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
75 "Tornado" (3c905) PCI
76 "Hurricane" (3c555/3cSOHO) PCI
77
78 If you have such a card, say Y here. More specific information is in
79 <file:Documentation/networking/device_drivers/ethernet/3com/vortex.rst>
80 and in the comments at the beginning of
81 <file:drivers/net/ethernet/3com/3c59x.c>.
82
83 To compile this support as a module, choose M here.
84
85config TYPHOON
86 tristate "3cr990 series \"Typhoon\" support"
87 depends on PCI
88 select CRC32
89 help
90 This option enables driver support for the 3cr990 series of cards:
91
92 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
93 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
94 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
95
96 If you have a network (Ethernet) card of this type, say Y here.
97
98 To compile this driver as a module, choose M here. The module
99 will be called typhoon.
100
101endif # NET_VENDOR_3COM