Linux Audio

Check our new training course

Loading...
v6.13.7
 1// SPDX-License-Identifier: GPL-2.0-only
 2/*
 3 * Xilinx Spartan6 and 7 Series Slave Serial SPI Driver
 4 *
 5 * Copyright (C) 2017 DENX Software Engineering
 6 *
 7 * Anatolij Gustschin <agust@denx.de>
 8 *
 9 * Manage Xilinx FPGA firmware that is loaded over SPI using
10 * the slave serial configuration interface.
11 */
12
13#include "xilinx-core.h"
14
 
 
15#include <linux/module.h>
16#include <linux/mod_devicetable.h>
17#include <linux/of.h>
18#include <linux/spi/spi.h>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
19
20static int xilinx_spi_write(struct xilinx_fpga_core *core, const char *buf,
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
21			    size_t count)
22{
23	struct spi_device *spi = to_spi_device(core->dev);
24	const char *fw_data = buf;
25	const char *fw_data_end = fw_data + count;
26
27	while (fw_data < fw_data_end) {
28		size_t remaining, stride;
29		int ret;
30
31		remaining = fw_data_end - fw_data;
32		stride = min_t(size_t, remaining, SZ_4K);
33
34		ret = spi_write(spi, fw_data, stride);
35		if (ret) {
36			dev_err(core->dev, "SPI error in firmware write: %d\n",
37				ret);
38			return ret;
39		}
40		fw_data += stride;
41	}
42
43	return 0;
44}
45
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
46static int xilinx_spi_probe(struct spi_device *spi)
47{
48	struct xilinx_fpga_core *core;
 
49
50	core = devm_kzalloc(&spi->dev, sizeof(*core), GFP_KERNEL);
51	if (!core)
52		return -ENOMEM;
53
54	core->dev = &spi->dev;
55	core->write = xilinx_spi_write;
56
57	return xilinx_core_probe(core);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
58}
59
60#ifdef CONFIG_OF
61static const struct of_device_id xlnx_spi_of_match[] = {
62	{
63		.compatible = "xlnx,fpga-slave-serial",
64	},
65	{}
66};
67MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
68#endif
69
70static struct spi_driver xilinx_slave_spi_driver = {
71	.driver = {
72		.name = "xlnx-slave-spi",
73		.of_match_table = of_match_ptr(xlnx_spi_of_match),
74	},
75	.probe = xilinx_spi_probe,
 
76};
77
78module_spi_driver(xilinx_slave_spi_driver)
79
80MODULE_LICENSE("GPL v2");
81MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
82MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI");
v5.9
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Xilinx Spartan6 and 7 Series Slave Serial SPI Driver
  4 *
  5 * Copyright (C) 2017 DENX Software Engineering
  6 *
  7 * Anatolij Gustschin <agust@denx.de>
  8 *
  9 * Manage Xilinx FPGA firmware that is loaded over SPI using
 10 * the slave serial configuration interface.
 11 */
 12
 13#include <linux/delay.h>
 14#include <linux/device.h>
 15#include <linux/fpga/fpga-mgr.h>
 16#include <linux/gpio/consumer.h>
 17#include <linux/module.h>
 18#include <linux/mod_devicetable.h>
 19#include <linux/of.h>
 20#include <linux/spi/spi.h>
 21#include <linux/sizes.h>
 22
 23struct xilinx_spi_conf {
 24	struct spi_device *spi;
 25	struct gpio_desc *prog_b;
 26	struct gpio_desc *init_b;
 27	struct gpio_desc *done;
 28};
 29
 30static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
 31{
 32	struct xilinx_spi_conf *conf = mgr->priv;
 33
 34	if (!gpiod_get_value(conf->done))
 35		return FPGA_MGR_STATE_RESET;
 36
 37	return FPGA_MGR_STATE_UNKNOWN;
 38}
 39
 40/**
 41 * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait
 42 * a given delay if the pin is unavailable
 43 *
 44 * @mgr:        The FPGA manager object
 45 * @value:      Value INIT_B to wait for (1 = asserted = low)
 46 * @alt_udelay: Delay to wait if the INIT_B GPIO is not available
 47 *
 48 * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if
 49 * too much time passed waiting for that. If no INIT_B GPIO is available
 50 * then always return 0.
 51 */
 52static int wait_for_init_b(struct fpga_manager *mgr, int value,
 53			   unsigned long alt_udelay)
 54{
 55	struct xilinx_spi_conf *conf = mgr->priv;
 56	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 57
 58	if (conf->init_b) {
 59		while (time_before(jiffies, timeout)) {
 60			/* dump_state(conf, "wait for init_d .."); */
 61			if (gpiod_get_value(conf->init_b) == value)
 62				return 0;
 63			usleep_range(100, 400);
 64		}
 65		return -ETIMEDOUT;
 66	}
 67
 68	udelay(alt_udelay);
 69
 70	return 0;
 71}
 72
 73static int xilinx_spi_write_init(struct fpga_manager *mgr,
 74				 struct fpga_image_info *info,
 75				 const char *buf, size_t count)
 76{
 77	struct xilinx_spi_conf *conf = mgr->priv;
 78	int err;
 79
 80	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
 81		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
 82		return -EINVAL;
 83	}
 84
 85	gpiod_set_value(conf->prog_b, 1);
 86
 87	err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */
 88	if (err) {
 89		dev_err(&mgr->dev, "INIT_B pin did not go low\n");
 90		gpiod_set_value(conf->prog_b, 0);
 91		return err;
 92	}
 93
 94	gpiod_set_value(conf->prog_b, 0);
 95
 96	err = wait_for_init_b(mgr, 0, 0);
 97	if (err) {
 98		dev_err(&mgr->dev, "INIT_B pin did not go high\n");
 99		return err;
100	}
101
102	if (gpiod_get_value(conf->done)) {
103		dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
104		return -EIO;
105	}
106
107	/* program latency */
108	usleep_range(7500, 7600);
109	return 0;
110}
111
112static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
113			    size_t count)
114{
115	struct xilinx_spi_conf *conf = mgr->priv;
116	const char *fw_data = buf;
117	const char *fw_data_end = fw_data + count;
118
119	while (fw_data < fw_data_end) {
120		size_t remaining, stride;
121		int ret;
122
123		remaining = fw_data_end - fw_data;
124		stride = min_t(size_t, remaining, SZ_4K);
125
126		ret = spi_write(conf->spi, fw_data, stride);
127		if (ret) {
128			dev_err(&mgr->dev, "SPI error in firmware write: %d\n",
129				ret);
130			return ret;
131		}
132		fw_data += stride;
133	}
134
135	return 0;
136}
137
138static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf)
139{
140	struct spi_device *spi = conf->spi;
141	const u8 din_data[1] = { 0xff };
142	int ret;
143
144	ret = spi_write(conf->spi, din_data, sizeof(din_data));
145	if (ret)
146		dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret);
147
148	return ret;
149}
150
151static int xilinx_spi_write_complete(struct fpga_manager *mgr,
152				     struct fpga_image_info *info)
153{
154	struct xilinx_spi_conf *conf = mgr->priv;
155	unsigned long timeout;
156	int ret;
157
158	if (gpiod_get_value(conf->done))
159		return xilinx_spi_apply_cclk_cycles(conf);
160
161	timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
162
163	while (time_before(jiffies, timeout)) {
164
165		ret = xilinx_spi_apply_cclk_cycles(conf);
166		if (ret)
167			return ret;
168
169		if (gpiod_get_value(conf->done))
170			return xilinx_spi_apply_cclk_cycles(conf);
171	}
172
173	dev_err(&mgr->dev, "Timeout after config data transfer.\n");
174	return -ETIMEDOUT;
175}
176
177static const struct fpga_manager_ops xilinx_spi_ops = {
178	.state = xilinx_spi_state,
179	.write_init = xilinx_spi_write_init,
180	.write = xilinx_spi_write,
181	.write_complete = xilinx_spi_write_complete,
182};
183
184static int xilinx_spi_probe(struct spi_device *spi)
185{
186	struct xilinx_spi_conf *conf;
187	struct fpga_manager *mgr;
188
189	conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
190	if (!conf)
191		return -ENOMEM;
192
193	conf->spi = spi;
 
194
195	/* PROGRAM_B is active low */
196	conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
197	if (IS_ERR(conf->prog_b)) {
198		dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n",
199			PTR_ERR(conf->prog_b));
200		return PTR_ERR(conf->prog_b);
201	}
202
203	conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN);
204	if (IS_ERR(conf->init_b)) {
205		dev_err(&spi->dev, "Failed to get INIT_B gpio: %ld\n",
206			PTR_ERR(conf->init_b));
207		return PTR_ERR(conf->init_b);
208	}
209
210	conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
211	if (IS_ERR(conf->done)) {
212		dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n",
213			PTR_ERR(conf->done));
214		return PTR_ERR(conf->done);
215	}
216
217	mgr = devm_fpga_mgr_create(&spi->dev,
218				   "Xilinx Slave Serial FPGA Manager",
219				   &xilinx_spi_ops, conf);
220	if (!mgr)
221		return -ENOMEM;
222
223	spi_set_drvdata(spi, mgr);
224
225	return fpga_mgr_register(mgr);
226}
227
228static int xilinx_spi_remove(struct spi_device *spi)
229{
230	struct fpga_manager *mgr = spi_get_drvdata(spi);
231
232	fpga_mgr_unregister(mgr);
233
234	return 0;
235}
236
 
237static const struct of_device_id xlnx_spi_of_match[] = {
238	{ .compatible = "xlnx,fpga-slave-serial", },
 
 
239	{}
240};
241MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
 
242
243static struct spi_driver xilinx_slave_spi_driver = {
244	.driver = {
245		.name = "xlnx-slave-spi",
246		.of_match_table = of_match_ptr(xlnx_spi_of_match),
247	},
248	.probe = xilinx_spi_probe,
249	.remove = xilinx_spi_remove,
250};
251
252module_spi_driver(xilinx_slave_spi_driver)
253
254MODULE_LICENSE("GPL v2");
255MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
256MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI");