Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#include <linux/jump_label.h>
3#include <asm/unwind_hints.h>
4#include <asm/cpufeatures.h>
5#include <asm/page_types.h>
6#include <asm/percpu.h>
7#include <asm/asm-offsets.h>
8#include <asm/processor-flags.h>
9#include <asm/ptrace-abi.h>
10#include <asm/msr.h>
11#include <asm/nospec-branch.h>
12
13/*
14
15 x86 function call convention, 64-bit:
16 -------------------------------------
17 arguments | callee-saved | extra caller-saved | return
18 [callee-clobbered] | | [callee-clobbered] |
19 ---------------------------------------------------------------------------
20 rdi rsi rdx rcx r8-9 | rbx rbp [*] r12-15 | r10-11 | rax, rdx [**]
21
22 ( rsp is obviously invariant across normal function calls. (gcc can 'merge'
23 functions when it sees tail-call optimization possibilities) rflags is
24 clobbered. Leftover arguments are passed over the stack frame.)
25
26 [*] In the frame-pointers case rbp is fixed to the stack frame.
27
28 [**] for struct return values wider than 64 bits the return convention is a
29 bit more complex: up to 128 bits width we return small structures
30 straight in rax, rdx. For structures larger than that (3 words or
31 larger) the caller puts a pointer to an on-stack return struct
32 [allocated in the caller's stack frame] into the first argument - i.e.
33 into rdi. All other arguments shift up by one in this case.
34 Fortunately this case is rare in the kernel.
35
36For 32-bit we have the following conventions - kernel is built with
37-mregparm=3 and -freg-struct-return:
38
39 x86 function calling convention, 32-bit:
40 ----------------------------------------
41 arguments | callee-saved | extra caller-saved | return
42 [callee-clobbered] | | [callee-clobbered] |
43 -------------------------------------------------------------------------
44 eax edx ecx | ebx edi esi ebp [*] | <none> | eax, edx [**]
45
46 ( here too esp is obviously invariant across normal function calls. eflags
47 is clobbered. Leftover arguments are passed over the stack frame. )
48
49 [*] In the frame-pointers case ebp is fixed to the stack frame.
50
51 [**] We build with -freg-struct-return, which on 32-bit means similar
52 semantics as on 64-bit: edx can be used for a second return value
53 (i.e. covering integer and structure sizes up to 64 bits) - after that
54 it gets more complex and more expensive: 3-word or larger struct returns
55 get done in the caller's frame and the pointer to the return struct goes
56 into regparm0, i.e. eax - the other arguments shift up and the
57 function's register parameters degenerate to regparm=2 in essence.
58
59*/
60
61#ifdef CONFIG_X86_64
62
63/*
64 * 64-bit system call stack frame layout defines and helpers,
65 * for assembly code:
66 */
67
68.macro PUSH_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0 unwind_hint=1
69 .if \save_ret
70 pushq %rsi /* pt_regs->si */
71 movq 8(%rsp), %rsi /* temporarily store the return address in %rsi */
72 movq %rdi, 8(%rsp) /* pt_regs->di (overwriting original return address) */
73 .else
74 pushq %rdi /* pt_regs->di */
75 pushq %rsi /* pt_regs->si */
76 .endif
77 pushq \rdx /* pt_regs->dx */
78 pushq \rcx /* pt_regs->cx */
79 pushq \rax /* pt_regs->ax */
80 pushq %r8 /* pt_regs->r8 */
81 pushq %r9 /* pt_regs->r9 */
82 pushq %r10 /* pt_regs->r10 */
83 pushq %r11 /* pt_regs->r11 */
84 pushq %rbx /* pt_regs->rbx */
85 pushq %rbp /* pt_regs->rbp */
86 pushq %r12 /* pt_regs->r12 */
87 pushq %r13 /* pt_regs->r13 */
88 pushq %r14 /* pt_regs->r14 */
89 pushq %r15 /* pt_regs->r15 */
90
91 .if \unwind_hint
92 UNWIND_HINT_REGS
93 .endif
94
95 .if \save_ret
96 pushq %rsi /* return address on top of stack */
97 .endif
98.endm
99
100.macro CLEAR_REGS clear_bp=1
101 /*
102 * Sanitize registers of values that a speculation attack might
103 * otherwise want to exploit. The lower registers are likely clobbered
104 * well before they could be put to use in a speculative execution
105 * gadget.
106 */
107 xorl %esi, %esi /* nospec si */
108 xorl %edx, %edx /* nospec dx */
109 xorl %ecx, %ecx /* nospec cx */
110 xorl %r8d, %r8d /* nospec r8 */
111 xorl %r9d, %r9d /* nospec r9 */
112 xorl %r10d, %r10d /* nospec r10 */
113 xorl %r11d, %r11d /* nospec r11 */
114 xorl %ebx, %ebx /* nospec rbx */
115 .if \clear_bp
116 xorl %ebp, %ebp /* nospec rbp */
117 .endif
118 xorl %r12d, %r12d /* nospec r12 */
119 xorl %r13d, %r13d /* nospec r13 */
120 xorl %r14d, %r14d /* nospec r14 */
121 xorl %r15d, %r15d /* nospec r15 */
122
123.endm
124
125.macro PUSH_AND_CLEAR_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0 clear_bp=1 unwind_hint=1
126 PUSH_REGS rdx=\rdx, rcx=\rcx, rax=\rax, save_ret=\save_ret unwind_hint=\unwind_hint
127 CLEAR_REGS clear_bp=\clear_bp
128.endm
129
130.macro POP_REGS pop_rdi=1
131 popq %r15
132 popq %r14
133 popq %r13
134 popq %r12
135 popq %rbp
136 popq %rbx
137 popq %r11
138 popq %r10
139 popq %r9
140 popq %r8
141 popq %rax
142 popq %rcx
143 popq %rdx
144 popq %rsi
145 .if \pop_rdi
146 popq %rdi
147 .endif
148.endm
149
150#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
151
152/*
153 * MITIGATION_PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two
154 * halves:
155 */
156#define PTI_USER_PGTABLE_BIT PAGE_SHIFT
157#define PTI_USER_PGTABLE_MASK (1 << PTI_USER_PGTABLE_BIT)
158#define PTI_USER_PCID_BIT X86_CR3_PTI_PCID_USER_BIT
159#define PTI_USER_PCID_MASK (1 << PTI_USER_PCID_BIT)
160#define PTI_USER_PGTABLE_AND_PCID_MASK (PTI_USER_PCID_MASK | PTI_USER_PGTABLE_MASK)
161
162.macro SET_NOFLUSH_BIT reg:req
163 bts $X86_CR3_PCID_NOFLUSH_BIT, \reg
164.endm
165
166.macro ADJUST_KERNEL_CR3 reg:req
167 ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID
168 /* Clear PCID and "MITIGATION_PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */
169 andq $(~PTI_USER_PGTABLE_AND_PCID_MASK), \reg
170.endm
171
172.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
173 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
174 mov %cr3, \scratch_reg
175 ADJUST_KERNEL_CR3 \scratch_reg
176 mov \scratch_reg, %cr3
177.Lend_\@:
178.endm
179
180#define THIS_CPU_user_pcid_flush_mask \
181 PER_CPU_VAR(cpu_tlbstate + TLB_STATE_user_pcid_flush_mask)
182
183.macro SWITCH_TO_USER_CR3 scratch_reg:req scratch_reg2:req
184 mov %cr3, \scratch_reg
185
186 ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
187
188 /*
189 * Test if the ASID needs a flush.
190 */
191 movq \scratch_reg, \scratch_reg2
192 andq $(0x7FF), \scratch_reg /* mask ASID */
193 bt \scratch_reg, THIS_CPU_user_pcid_flush_mask
194 jnc .Lnoflush_\@
195
196 /* Flush needed, clear the bit */
197 btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
198 movq \scratch_reg2, \scratch_reg
199 jmp .Lwrcr3_pcid_\@
200
201.Lnoflush_\@:
202 movq \scratch_reg2, \scratch_reg
203 SET_NOFLUSH_BIT \scratch_reg
204
205.Lwrcr3_pcid_\@:
206 /* Flip the ASID to the user version */
207 orq $(PTI_USER_PCID_MASK), \scratch_reg
208
209.Lwrcr3_\@:
210 /* Flip the PGD to the user version */
211 orq $(PTI_USER_PGTABLE_MASK), \scratch_reg
212 mov \scratch_reg, %cr3
213.endm
214
215.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
216 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
217 SWITCH_TO_USER_CR3 \scratch_reg \scratch_reg2
218.Lend_\@:
219.endm
220
221.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
222 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
223 pushq %rax
224 SWITCH_TO_USER_CR3 scratch_reg=\scratch_reg scratch_reg2=%rax
225 popq %rax
226.Lend_\@:
227.endm
228
229.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
230 ALTERNATIVE "jmp .Ldone_\@", "", X86_FEATURE_PTI
231 movq %cr3, \scratch_reg
232 movq \scratch_reg, \save_reg
233 /*
234 * Test the user pagetable bit. If set, then the user page tables
235 * are active. If clear CR3 already has the kernel page table
236 * active.
237 */
238 bt $PTI_USER_PGTABLE_BIT, \scratch_reg
239 jnc .Ldone_\@
240
241 ADJUST_KERNEL_CR3 \scratch_reg
242 movq \scratch_reg, %cr3
243
244.Ldone_\@:
245.endm
246
247/* Restore CR3 from a kernel context. May restore a user CR3 value. */
248.macro PARANOID_RESTORE_CR3 scratch_reg:req save_reg:req
249 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
250
251 /*
252 * If CR3 contained the kernel page tables at the paranoid exception
253 * entry, then there is nothing to restore as CR3 is not modified while
254 * handling the exception.
255 */
256 bt $PTI_USER_PGTABLE_BIT, \save_reg
257 jnc .Lend_\@
258
259 ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
260
261 /*
262 * Check if there's a pending flush for the user ASID we're
263 * about to set.
264 */
265 movq \save_reg, \scratch_reg
266 andq $(0x7FF), \scratch_reg
267 btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
268 jc .Lwrcr3_\@
269
270 SET_NOFLUSH_BIT \save_reg
271
272.Lwrcr3_\@:
273 movq \save_reg, %cr3
274.Lend_\@:
275.endm
276
277#else /* CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=n: */
278
279.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
280.endm
281.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
282.endm
283.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
284.endm
285.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
286.endm
287.macro PARANOID_RESTORE_CR3 scratch_reg:req save_reg:req
288.endm
289
290#endif
291
292/*
293 * IBRS kernel mitigation for Spectre_v2.
294 *
295 * Assumes full context is established (PUSH_REGS, CR3 and GS) and it clobbers
296 * the regs it uses (AX, CX, DX). Must be called before the first RET
297 * instruction (NOTE! UNTRAIN_RET includes a RET instruction)
298 *
299 * The optional argument is used to save/restore the current value,
300 * which is used on the paranoid paths.
301 *
302 * Assumes x86_spec_ctrl_{base,current} to have SPEC_CTRL_IBRS set.
303 */
304.macro IBRS_ENTER save_reg
305#ifdef CONFIG_MITIGATION_IBRS_ENTRY
306 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_KERNEL_IBRS
307 movl $MSR_IA32_SPEC_CTRL, %ecx
308
309.ifnb \save_reg
310 rdmsr
311 shl $32, %rdx
312 or %rdx, %rax
313 mov %rax, \save_reg
314 test $SPEC_CTRL_IBRS, %eax
315 jz .Ldo_wrmsr_\@
316 lfence
317 jmp .Lend_\@
318.Ldo_wrmsr_\@:
319.endif
320
321 movq PER_CPU_VAR(x86_spec_ctrl_current), %rdx
322 movl %edx, %eax
323 shr $32, %rdx
324 wrmsr
325.Lend_\@:
326#endif
327.endm
328
329/*
330 * Similar to IBRS_ENTER, requires KERNEL GS,CR3 and clobbers (AX, CX, DX)
331 * regs. Must be called after the last RET.
332 */
333.macro IBRS_EXIT save_reg
334#ifdef CONFIG_MITIGATION_IBRS_ENTRY
335 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_KERNEL_IBRS
336 movl $MSR_IA32_SPEC_CTRL, %ecx
337
338.ifnb \save_reg
339 mov \save_reg, %rdx
340.else
341 movq PER_CPU_VAR(x86_spec_ctrl_current), %rdx
342 andl $(~SPEC_CTRL_IBRS), %edx
343.endif
344
345 movl %edx, %eax
346 shr $32, %rdx
347 wrmsr
348.Lend_\@:
349#endif
350.endm
351
352/*
353 * Mitigate Spectre v1 for conditional swapgs code paths.
354 *
355 * FENCE_SWAPGS_USER_ENTRY is used in the user entry swapgs code path, to
356 * prevent a speculative swapgs when coming from kernel space.
357 *
358 * FENCE_SWAPGS_KERNEL_ENTRY is used in the kernel entry non-swapgs code path,
359 * to prevent the swapgs from getting speculatively skipped when coming from
360 * user space.
361 */
362.macro FENCE_SWAPGS_USER_ENTRY
363 ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_USER
364.endm
365.macro FENCE_SWAPGS_KERNEL_ENTRY
366 ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_KERNEL
367.endm
368
369.macro STACKLEAK_ERASE_NOCLOBBER
370#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
371 PUSH_AND_CLEAR_REGS
372 call stackleak_erase
373 POP_REGS
374#endif
375.endm
376
377.macro SAVE_AND_SET_GSBASE scratch_reg:req save_reg:req
378 rdgsbase \save_reg
379 GET_PERCPU_BASE \scratch_reg
380 wrgsbase \scratch_reg
381.endm
382
383#else /* CONFIG_X86_64 */
384# undef UNWIND_HINT_IRET_REGS
385# define UNWIND_HINT_IRET_REGS
386#endif /* !CONFIG_X86_64 */
387
388.macro STACKLEAK_ERASE
389#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
390 call stackleak_erase
391#endif
392.endm
393
394#ifdef CONFIG_SMP
395
396/*
397 * CPU/node NR is loaded from the limit (size) field of a special segment
398 * descriptor entry in GDT.
399 */
400.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
401 movq $__CPUNODE_SEG, \reg
402 lsl \reg, \reg
403.endm
404
405/*
406 * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
407 * We normally use %gs for accessing per-CPU data, but we are setting up
408 * %gs here and obviously can not use %gs itself to access per-CPU data.
409 *
410 * Do not use RDPID, because KVM loads guest's TSC_AUX on vm-entry and
411 * may not restore the host's value until the CPU returns to userspace.
412 * Thus the kernel would consume a guest's TSC_AUX if an NMI arrives
413 * while running KVM's run loop.
414 */
415.macro GET_PERCPU_BASE reg:req
416 LOAD_CPU_AND_NODE_SEG_LIMIT \reg
417 andq $VDSO_CPUNODE_MASK, \reg
418 movq __per_cpu_offset(, \reg, 8), \reg
419.endm
420
421#else
422
423.macro GET_PERCPU_BASE reg:req
424 movq pcpu_unit_offsets(%rip), \reg
425.endm
426
427#endif /* CONFIG_SMP */
428
429#ifdef CONFIG_X86_64
430
431/* rdi: arg1 ... normal C conventions. rax is saved/restored. */
432.macro THUNK name, func
433SYM_FUNC_START(\name)
434 pushq %rbp
435 movq %rsp, %rbp
436
437 pushq %rdi
438 pushq %rsi
439 pushq %rdx
440 pushq %rcx
441 pushq %rax
442 pushq %r8
443 pushq %r9
444 pushq %r10
445 pushq %r11
446
447 call \func
448
449 popq %r11
450 popq %r10
451 popq %r9
452 popq %r8
453 popq %rax
454 popq %rcx
455 popq %rdx
456 popq %rsi
457 popq %rdi
458 popq %rbp
459 RET
460SYM_FUNC_END(\name)
461 _ASM_NOKPROBE(\name)
462.endm
463
464#else /* CONFIG_X86_32 */
465
466/* put return address in eax (arg1) */
467.macro THUNK name, func, put_ret_addr_in_eax=0
468SYM_CODE_START_NOALIGN(\name)
469 pushl %eax
470 pushl %ecx
471 pushl %edx
472
473 .if \put_ret_addr_in_eax
474 /* Place EIP in the arg1 */
475 movl 3*4(%esp), %eax
476 .endif
477
478 call \func
479 popl %edx
480 popl %ecx
481 popl %eax
482 RET
483 _ASM_NOKPROBE(\name)
484SYM_CODE_END(\name)
485 .endm
486
487#endif
1/* SPDX-License-Identifier: GPL-2.0 */
2#include <linux/jump_label.h>
3#include <asm/unwind_hints.h>
4#include <asm/cpufeatures.h>
5#include <asm/page_types.h>
6#include <asm/percpu.h>
7#include <asm/asm-offsets.h>
8#include <asm/processor-flags.h>
9#include <asm/inst.h>
10
11/*
12
13 x86 function call convention, 64-bit:
14 -------------------------------------
15 arguments | callee-saved | extra caller-saved | return
16 [callee-clobbered] | | [callee-clobbered] |
17 ---------------------------------------------------------------------------
18 rdi rsi rdx rcx r8-9 | rbx rbp [*] r12-15 | r10-11 | rax, rdx [**]
19
20 ( rsp is obviously invariant across normal function calls. (gcc can 'merge'
21 functions when it sees tail-call optimization possibilities) rflags is
22 clobbered. Leftover arguments are passed over the stack frame.)
23
24 [*] In the frame-pointers case rbp is fixed to the stack frame.
25
26 [**] for struct return values wider than 64 bits the return convention is a
27 bit more complex: up to 128 bits width we return small structures
28 straight in rax, rdx. For structures larger than that (3 words or
29 larger) the caller puts a pointer to an on-stack return struct
30 [allocated in the caller's stack frame] into the first argument - i.e.
31 into rdi. All other arguments shift up by one in this case.
32 Fortunately this case is rare in the kernel.
33
34For 32-bit we have the following conventions - kernel is built with
35-mregparm=3 and -freg-struct-return:
36
37 x86 function calling convention, 32-bit:
38 ----------------------------------------
39 arguments | callee-saved | extra caller-saved | return
40 [callee-clobbered] | | [callee-clobbered] |
41 -------------------------------------------------------------------------
42 eax edx ecx | ebx edi esi ebp [*] | <none> | eax, edx [**]
43
44 ( here too esp is obviously invariant across normal function calls. eflags
45 is clobbered. Leftover arguments are passed over the stack frame. )
46
47 [*] In the frame-pointers case ebp is fixed to the stack frame.
48
49 [**] We build with -freg-struct-return, which on 32-bit means similar
50 semantics as on 64-bit: edx can be used for a second return value
51 (i.e. covering integer and structure sizes up to 64 bits) - after that
52 it gets more complex and more expensive: 3-word or larger struct returns
53 get done in the caller's frame and the pointer to the return struct goes
54 into regparm0, i.e. eax - the other arguments shift up and the
55 function's register parameters degenerate to regparm=2 in essence.
56
57*/
58
59#ifdef CONFIG_X86_64
60
61/*
62 * 64-bit system call stack frame layout defines and helpers,
63 * for assembly code:
64 */
65
66/* The layout forms the "struct pt_regs" on the stack: */
67/*
68 * C ABI says these regs are callee-preserved. They aren't saved on kernel entry
69 * unless syscall needs a complete, fully filled "struct pt_regs".
70 */
71#define R15 0*8
72#define R14 1*8
73#define R13 2*8
74#define R12 3*8
75#define RBP 4*8
76#define RBX 5*8
77/* These regs are callee-clobbered. Always saved on kernel entry. */
78#define R11 6*8
79#define R10 7*8
80#define R9 8*8
81#define R8 9*8
82#define RAX 10*8
83#define RCX 11*8
84#define RDX 12*8
85#define RSI 13*8
86#define RDI 14*8
87/*
88 * On syscall entry, this is syscall#. On CPU exception, this is error code.
89 * On hw interrupt, it's IRQ number:
90 */
91#define ORIG_RAX 15*8
92/* Return frame for iretq */
93#define RIP 16*8
94#define CS 17*8
95#define EFLAGS 18*8
96#define RSP 19*8
97#define SS 20*8
98
99#define SIZEOF_PTREGS 21*8
100
101.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax save_ret=0
102 .if \save_ret
103 pushq %rsi /* pt_regs->si */
104 movq 8(%rsp), %rsi /* temporarily store the return address in %rsi */
105 movq %rdi, 8(%rsp) /* pt_regs->di (overwriting original return address) */
106 .else
107 pushq %rdi /* pt_regs->di */
108 pushq %rsi /* pt_regs->si */
109 .endif
110 pushq \rdx /* pt_regs->dx */
111 pushq %rcx /* pt_regs->cx */
112 pushq \rax /* pt_regs->ax */
113 pushq %r8 /* pt_regs->r8 */
114 pushq %r9 /* pt_regs->r9 */
115 pushq %r10 /* pt_regs->r10 */
116 pushq %r11 /* pt_regs->r11 */
117 pushq %rbx /* pt_regs->rbx */
118 pushq %rbp /* pt_regs->rbp */
119 pushq %r12 /* pt_regs->r12 */
120 pushq %r13 /* pt_regs->r13 */
121 pushq %r14 /* pt_regs->r14 */
122 pushq %r15 /* pt_regs->r15 */
123 UNWIND_HINT_REGS
124
125 .if \save_ret
126 pushq %rsi /* return address on top of stack */
127 .endif
128
129 /*
130 * Sanitize registers of values that a speculation attack might
131 * otherwise want to exploit. The lower registers are likely clobbered
132 * well before they could be put to use in a speculative execution
133 * gadget.
134 */
135 xorl %edx, %edx /* nospec dx */
136 xorl %ecx, %ecx /* nospec cx */
137 xorl %r8d, %r8d /* nospec r8 */
138 xorl %r9d, %r9d /* nospec r9 */
139 xorl %r10d, %r10d /* nospec r10 */
140 xorl %r11d, %r11d /* nospec r11 */
141 xorl %ebx, %ebx /* nospec rbx */
142 xorl %ebp, %ebp /* nospec rbp */
143 xorl %r12d, %r12d /* nospec r12 */
144 xorl %r13d, %r13d /* nospec r13 */
145 xorl %r14d, %r14d /* nospec r14 */
146 xorl %r15d, %r15d /* nospec r15 */
147
148.endm
149
150.macro POP_REGS pop_rdi=1 skip_r11rcx=0
151 popq %r15
152 popq %r14
153 popq %r13
154 popq %r12
155 popq %rbp
156 popq %rbx
157 .if \skip_r11rcx
158 popq %rsi
159 .else
160 popq %r11
161 .endif
162 popq %r10
163 popq %r9
164 popq %r8
165 popq %rax
166 .if \skip_r11rcx
167 popq %rsi
168 .else
169 popq %rcx
170 .endif
171 popq %rdx
172 popq %rsi
173 .if \pop_rdi
174 popq %rdi
175 .endif
176.endm
177
178#ifdef CONFIG_PAGE_TABLE_ISOLATION
179
180/*
181 * PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two
182 * halves:
183 */
184#define PTI_USER_PGTABLE_BIT PAGE_SHIFT
185#define PTI_USER_PGTABLE_MASK (1 << PTI_USER_PGTABLE_BIT)
186#define PTI_USER_PCID_BIT X86_CR3_PTI_PCID_USER_BIT
187#define PTI_USER_PCID_MASK (1 << PTI_USER_PCID_BIT)
188#define PTI_USER_PGTABLE_AND_PCID_MASK (PTI_USER_PCID_MASK | PTI_USER_PGTABLE_MASK)
189
190.macro SET_NOFLUSH_BIT reg:req
191 bts $X86_CR3_PCID_NOFLUSH_BIT, \reg
192.endm
193
194.macro ADJUST_KERNEL_CR3 reg:req
195 ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID
196 /* Clear PCID and "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */
197 andq $(~PTI_USER_PGTABLE_AND_PCID_MASK), \reg
198.endm
199
200.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
201 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
202 mov %cr3, \scratch_reg
203 ADJUST_KERNEL_CR3 \scratch_reg
204 mov \scratch_reg, %cr3
205.Lend_\@:
206.endm
207
208#define THIS_CPU_user_pcid_flush_mask \
209 PER_CPU_VAR(cpu_tlbstate) + TLB_STATE_user_pcid_flush_mask
210
211.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
212 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
213 mov %cr3, \scratch_reg
214
215 ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
216
217 /*
218 * Test if the ASID needs a flush.
219 */
220 movq \scratch_reg, \scratch_reg2
221 andq $(0x7FF), \scratch_reg /* mask ASID */
222 bt \scratch_reg, THIS_CPU_user_pcid_flush_mask
223 jnc .Lnoflush_\@
224
225 /* Flush needed, clear the bit */
226 btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
227 movq \scratch_reg2, \scratch_reg
228 jmp .Lwrcr3_pcid_\@
229
230.Lnoflush_\@:
231 movq \scratch_reg2, \scratch_reg
232 SET_NOFLUSH_BIT \scratch_reg
233
234.Lwrcr3_pcid_\@:
235 /* Flip the ASID to the user version */
236 orq $(PTI_USER_PCID_MASK), \scratch_reg
237
238.Lwrcr3_\@:
239 /* Flip the PGD to the user version */
240 orq $(PTI_USER_PGTABLE_MASK), \scratch_reg
241 mov \scratch_reg, %cr3
242.Lend_\@:
243.endm
244
245.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
246 pushq %rax
247 SWITCH_TO_USER_CR3_NOSTACK scratch_reg=\scratch_reg scratch_reg2=%rax
248 popq %rax
249.endm
250
251.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
252 ALTERNATIVE "jmp .Ldone_\@", "", X86_FEATURE_PTI
253 movq %cr3, \scratch_reg
254 movq \scratch_reg, \save_reg
255 /*
256 * Test the user pagetable bit. If set, then the user page tables
257 * are active. If clear CR3 already has the kernel page table
258 * active.
259 */
260 bt $PTI_USER_PGTABLE_BIT, \scratch_reg
261 jnc .Ldone_\@
262
263 ADJUST_KERNEL_CR3 \scratch_reg
264 movq \scratch_reg, %cr3
265
266.Ldone_\@:
267.endm
268
269.macro RESTORE_CR3 scratch_reg:req save_reg:req
270 ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
271
272 ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
273
274 /*
275 * KERNEL pages can always resume with NOFLUSH as we do
276 * explicit flushes.
277 */
278 bt $PTI_USER_PGTABLE_BIT, \save_reg
279 jnc .Lnoflush_\@
280
281 /*
282 * Check if there's a pending flush for the user ASID we're
283 * about to set.
284 */
285 movq \save_reg, \scratch_reg
286 andq $(0x7FF), \scratch_reg
287 bt \scratch_reg, THIS_CPU_user_pcid_flush_mask
288 jnc .Lnoflush_\@
289
290 btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
291 jmp .Lwrcr3_\@
292
293.Lnoflush_\@:
294 SET_NOFLUSH_BIT \save_reg
295
296.Lwrcr3_\@:
297 /*
298 * The CR3 write could be avoided when not changing its value,
299 * but would require a CR3 read *and* a scratch register.
300 */
301 movq \save_reg, %cr3
302.Lend_\@:
303.endm
304
305#else /* CONFIG_PAGE_TABLE_ISOLATION=n: */
306
307.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
308.endm
309.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
310.endm
311.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
312.endm
313.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
314.endm
315.macro RESTORE_CR3 scratch_reg:req save_reg:req
316.endm
317
318#endif
319
320/*
321 * Mitigate Spectre v1 for conditional swapgs code paths.
322 *
323 * FENCE_SWAPGS_USER_ENTRY is used in the user entry swapgs code path, to
324 * prevent a speculative swapgs when coming from kernel space.
325 *
326 * FENCE_SWAPGS_KERNEL_ENTRY is used in the kernel entry non-swapgs code path,
327 * to prevent the swapgs from getting speculatively skipped when coming from
328 * user space.
329 */
330.macro FENCE_SWAPGS_USER_ENTRY
331 ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_USER
332.endm
333.macro FENCE_SWAPGS_KERNEL_ENTRY
334 ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_KERNEL
335.endm
336
337.macro STACKLEAK_ERASE_NOCLOBBER
338#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
339 PUSH_AND_CLEAR_REGS
340 call stackleak_erase
341 POP_REGS
342#endif
343.endm
344
345.macro SAVE_AND_SET_GSBASE scratch_reg:req save_reg:req
346 rdgsbase \save_reg
347 GET_PERCPU_BASE \scratch_reg
348 wrgsbase \scratch_reg
349.endm
350
351#else /* CONFIG_X86_64 */
352# undef UNWIND_HINT_IRET_REGS
353# define UNWIND_HINT_IRET_REGS
354#endif /* !CONFIG_X86_64 */
355
356.macro STACKLEAK_ERASE
357#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
358 call stackleak_erase
359#endif
360.endm
361
362#ifdef CONFIG_SMP
363
364/*
365 * CPU/node NR is loaded from the limit (size) field of a special segment
366 * descriptor entry in GDT.
367 */
368.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
369 movq $__CPUNODE_SEG, \reg
370 lsl \reg, \reg
371.endm
372
373/*
374 * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
375 * We normally use %gs for accessing per-CPU data, but we are setting up
376 * %gs here and obviously can not use %gs itself to access per-CPU data.
377 *
378 * Do not use RDPID, because KVM loads guest's TSC_AUX on vm-entry and
379 * may not restore the host's value until the CPU returns to userspace.
380 * Thus the kernel would consume a guest's TSC_AUX if an NMI arrives
381 * while running KVM's run loop.
382 */
383.macro GET_PERCPU_BASE reg:req
384 LOAD_CPU_AND_NODE_SEG_LIMIT \reg
385 andq $VDSO_CPUNODE_MASK, \reg
386 movq __per_cpu_offset(, \reg, 8), \reg
387.endm
388
389#else
390
391.macro GET_PERCPU_BASE reg:req
392 movq pcpu_unit_offsets(%rip), \reg
393.endm
394
395#endif /* CONFIG_SMP */