Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * V4L2 fwnode binding parsing library
4 *
5 * Copyright (c) 2016 Intel Corporation.
6 * Author: Sakari Ailus <sakari.ailus@linux.intel.com>
7 *
8 * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd.
9 * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
10 *
11 * Copyright (C) 2012 Renesas Electronics Corp.
12 * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
13 */
14#ifndef _V4L2_FWNODE_H
15#define _V4L2_FWNODE_H
16
17#include <linux/errno.h>
18#include <linux/fwnode.h>
19#include <linux/list.h>
20#include <linux/types.h>
21
22#include <media/v4l2-mediabus.h>
23
24/**
25 * struct v4l2_fwnode_endpoint - the endpoint data structure
26 * @base: fwnode endpoint of the v4l2_fwnode
27 * @bus_type: bus type
28 * @bus: bus configuration data structure
29 * @bus.parallel: embedded &struct v4l2_mbus_config_parallel.
30 * Used if the bus is parallel.
31 * @bus.mipi_csi1: embedded &struct v4l2_mbus_config_mipi_csi1.
32 * Used if the bus is MIPI Alliance's Camera Serial
33 * Interface version 1 (MIPI CSI1) or Standard
34 * Mobile Imaging Architecture's Compact Camera Port 2
35 * (SMIA CCP2).
36 * @bus.mipi_csi2: embedded &struct v4l2_mbus_config_mipi_csi2.
37 * Used if the bus is MIPI Alliance's Camera Serial
38 * Interface version 2 (MIPI CSI2).
39 * @link_frequencies: array of supported link frequencies
40 * @nr_of_link_frequencies: number of elements in link_frequenccies array
41 */
42struct v4l2_fwnode_endpoint {
43 struct fwnode_endpoint base;
44 enum v4l2_mbus_type bus_type;
45 struct {
46 struct v4l2_mbus_config_parallel parallel;
47 struct v4l2_mbus_config_mipi_csi1 mipi_csi1;
48 struct v4l2_mbus_config_mipi_csi2 mipi_csi2;
49 } bus;
50 u64 *link_frequencies;
51 unsigned int nr_of_link_frequencies;
52};
53
54/**
55 * V4L2_FWNODE_PROPERTY_UNSET - identify a non initialized property
56 *
57 * All properties in &struct v4l2_fwnode_device_properties are initialized
58 * to this value.
59 */
60#define V4L2_FWNODE_PROPERTY_UNSET (-1U)
61
62/**
63 * enum v4l2_fwnode_orientation - possible device orientation
64 * @V4L2_FWNODE_ORIENTATION_FRONT: device installed on the front side
65 * @V4L2_FWNODE_ORIENTATION_BACK: device installed on the back side
66 * @V4L2_FWNODE_ORIENTATION_EXTERNAL: device externally located
67 */
68enum v4l2_fwnode_orientation {
69 V4L2_FWNODE_ORIENTATION_FRONT,
70 V4L2_FWNODE_ORIENTATION_BACK,
71 V4L2_FWNODE_ORIENTATION_EXTERNAL
72};
73
74/**
75 * struct v4l2_fwnode_device_properties - fwnode device properties
76 * @orientation: device orientation. See &enum v4l2_fwnode_orientation
77 * @rotation: device rotation
78 */
79struct v4l2_fwnode_device_properties {
80 enum v4l2_fwnode_orientation orientation;
81 unsigned int rotation;
82};
83
84/**
85 * struct v4l2_fwnode_link - a link between two endpoints
86 * @local_node: pointer to device_node of this endpoint
87 * @local_port: identifier of the port this endpoint belongs to
88 * @local_id: identifier of the id this endpoint belongs to
89 * @remote_node: pointer to device_node of the remote endpoint
90 * @remote_port: identifier of the port the remote endpoint belongs to
91 * @remote_id: identifier of the id the remote endpoint belongs to
92 */
93struct v4l2_fwnode_link {
94 struct fwnode_handle *local_node;
95 unsigned int local_port;
96 unsigned int local_id;
97 struct fwnode_handle *remote_node;
98 unsigned int remote_port;
99 unsigned int remote_id;
100};
101
102/**
103 * enum v4l2_connector_type - connector type
104 * @V4L2_CONN_UNKNOWN: unknown connector type, no V4L2 connector configuration
105 * @V4L2_CONN_COMPOSITE: analog composite connector
106 * @V4L2_CONN_SVIDEO: analog svideo connector
107 */
108enum v4l2_connector_type {
109 V4L2_CONN_UNKNOWN,
110 V4L2_CONN_COMPOSITE,
111 V4L2_CONN_SVIDEO,
112};
113
114/**
115 * struct v4l2_connector_link - connector link data structure
116 * @head: structure to be used to add the link to the
117 * &struct v4l2_fwnode_connector
118 * @fwnode_link: &struct v4l2_fwnode_link link between the connector and the
119 * device the connector belongs to.
120 */
121struct v4l2_connector_link {
122 struct list_head head;
123 struct v4l2_fwnode_link fwnode_link;
124};
125
126/**
127 * struct v4l2_fwnode_connector_analog - analog connector data structure
128 * @sdtv_stds: sdtv standards this connector supports, set to V4L2_STD_ALL
129 * if no restrictions are specified.
130 */
131struct v4l2_fwnode_connector_analog {
132 v4l2_std_id sdtv_stds;
133};
134
135/**
136 * struct v4l2_fwnode_connector - the connector data structure
137 * @name: the connector device name
138 * @label: optional connector label
139 * @type: connector type
140 * @links: list of all connector &struct v4l2_connector_link links
141 * @nr_of_links: total number of links
142 * @connector: connector configuration
143 * @connector.analog: analog connector configuration
144 * &struct v4l2_fwnode_connector_analog
145 */
146struct v4l2_fwnode_connector {
147 const char *name;
148 const char *label;
149 enum v4l2_connector_type type;
150 struct list_head links;
151 unsigned int nr_of_links;
152
153 union {
154 struct v4l2_fwnode_connector_analog analog;
155 /* future connectors */
156 } connector;
157};
158
159/**
160 * enum v4l2_fwnode_bus_type - Video bus types defined by firmware properties
161 * @V4L2_FWNODE_BUS_TYPE_GUESS: Default value if no bus-type fwnode property
162 * @V4L2_FWNODE_BUS_TYPE_CSI2_CPHY: MIPI CSI-2 bus, C-PHY physical layer
163 * @V4L2_FWNODE_BUS_TYPE_CSI1: MIPI CSI-1 bus
164 * @V4L2_FWNODE_BUS_TYPE_CCP2: SMIA Compact Camera Port 2 bus
165 * @V4L2_FWNODE_BUS_TYPE_CSI2_DPHY: MIPI CSI-2 bus, D-PHY physical layer
166 * @V4L2_FWNODE_BUS_TYPE_PARALLEL: Camera Parallel Interface bus
167 * @V4L2_FWNODE_BUS_TYPE_BT656: BT.656 video format bus-type
168 * @V4L2_FWNODE_BUS_TYPE_DPI: Video Parallel Interface bus
169 * @NR_OF_V4L2_FWNODE_BUS_TYPE: Number of bus-types
170 */
171enum v4l2_fwnode_bus_type {
172 V4L2_FWNODE_BUS_TYPE_GUESS = 0,
173 V4L2_FWNODE_BUS_TYPE_CSI2_CPHY,
174 V4L2_FWNODE_BUS_TYPE_CSI1,
175 V4L2_FWNODE_BUS_TYPE_CCP2,
176 V4L2_FWNODE_BUS_TYPE_CSI2_DPHY,
177 V4L2_FWNODE_BUS_TYPE_PARALLEL,
178 V4L2_FWNODE_BUS_TYPE_BT656,
179 V4L2_FWNODE_BUS_TYPE_DPI,
180 NR_OF_V4L2_FWNODE_BUS_TYPE
181};
182
183/**
184 * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties
185 * @fwnode: pointer to the endpoint's fwnode handle
186 * @vep: pointer to the V4L2 fwnode data structure
187 *
188 * This function parses the V4L2 fwnode endpoint specific parameters from the
189 * firmware. There are two ways to use this function, either by letting it
190 * obtain the type of the bus (by setting the @vep.bus_type field to
191 * V4L2_MBUS_UNKNOWN) or specifying the bus type explicitly to one of the &enum
192 * v4l2_mbus_type types.
193 *
194 * When @vep.bus_type is V4L2_MBUS_UNKNOWN, the function will use the "bus-type"
195 * property to determine the type when it is available. The caller is
196 * responsible for validating the contents of @vep.bus_type field after the call
197 * returns.
198 *
199 * As a deprecated functionality to support older DT bindings without "bus-type"
200 * property for devices that support multiple types, if the "bus-type" property
201 * does not exist, the function will attempt to guess the type based on the
202 * endpoint properties available. NEVER RELY ON GUESSING THE BUS TYPE IN NEW
203 * DRIVERS OR BINDINGS.
204 *
205 * It is also possible to set @vep.bus_type corresponding to an actual bus. In
206 * this case the function will only attempt to parse properties related to this
207 * bus, and it will return an error if the value of the "bus-type" property
208 * corresponds to a different bus.
209 *
210 * The caller is required to initialise all fields of @vep, either with
211 * explicitly values, or by zeroing them.
212 *
213 * The function does not change the V4L2 fwnode endpoint state if it fails.
214 *
215 * NOTE: This function does not parse "link-frequencies" property as its size is
216 * not known in advance. Please use v4l2_fwnode_endpoint_alloc_parse() if you
217 * need properties of variable size.
218 *
219 * Return: %0 on success or a negative error code on failure:
220 * %-ENOMEM on memory allocation failure
221 * %-EINVAL on parsing failure
222 * %-ENXIO on mismatching bus types
223 */
224int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode,
225 struct v4l2_fwnode_endpoint *vep);
226
227/**
228 * v4l2_fwnode_endpoint_free() - free the V4L2 fwnode acquired by
229 * v4l2_fwnode_endpoint_alloc_parse()
230 * @vep: the V4L2 fwnode the resources of which are to be released
231 *
232 * It is safe to call this function with NULL argument or on a V4L2 fwnode the
233 * parsing of which failed.
234 */
235void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep);
236
237/**
238 * v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties
239 * @fwnode: pointer to the endpoint's fwnode handle
240 * @vep: pointer to the V4L2 fwnode data structure
241 *
242 * This function parses the V4L2 fwnode endpoint specific parameters from the
243 * firmware. There are two ways to use this function, either by letting it
244 * obtain the type of the bus (by setting the @vep.bus_type field to
245 * V4L2_MBUS_UNKNOWN) or specifying the bus type explicitly to one of the &enum
246 * v4l2_mbus_type types.
247 *
248 * When @vep.bus_type is V4L2_MBUS_UNKNOWN, the function will use the "bus-type"
249 * property to determine the type when it is available. The caller is
250 * responsible for validating the contents of @vep.bus_type field after the call
251 * returns.
252 *
253 * As a deprecated functionality to support older DT bindings without "bus-type"
254 * property for devices that support multiple types, if the "bus-type" property
255 * does not exist, the function will attempt to guess the type based on the
256 * endpoint properties available. NEVER RELY ON GUESSING THE BUS TYPE IN NEW
257 * DRIVERS OR BINDINGS.
258 *
259 * It is also possible to set @vep.bus_type corresponding to an actual bus. In
260 * this case the function will only attempt to parse properties related to this
261 * bus, and it will return an error if the value of the "bus-type" property
262 * corresponds to a different bus.
263 *
264 * The caller is required to initialise all fields of @vep, either with
265 * explicitly values, or by zeroing them.
266 *
267 * The function does not change the V4L2 fwnode endpoint state if it fails.
268 *
269 * v4l2_fwnode_endpoint_alloc_parse() has two important differences to
270 * v4l2_fwnode_endpoint_parse():
271 *
272 * 1. It also parses variable size data.
273 *
274 * 2. The memory it has allocated to store the variable size data must be freed
275 * using v4l2_fwnode_endpoint_free() when no longer needed.
276 *
277 * Return: %0 on success or a negative error code on failure:
278 * %-ENOMEM on memory allocation failure
279 * %-EINVAL on parsing failure
280 * %-ENXIO on mismatching bus types
281 */
282int v4l2_fwnode_endpoint_alloc_parse(struct fwnode_handle *fwnode,
283 struct v4l2_fwnode_endpoint *vep);
284
285/**
286 * v4l2_fwnode_parse_link() - parse a link between two endpoints
287 * @fwnode: pointer to the endpoint's fwnode at the local end of the link
288 * @link: pointer to the V4L2 fwnode link data structure
289 *
290 * Fill the link structure with the local and remote nodes and port numbers.
291 * The local_node and remote_node fields are set to point to the local and
292 * remote port's parent nodes respectively (the port parent node being the
293 * parent node of the port node if that node isn't a 'ports' node, or the
294 * grand-parent node of the port node otherwise).
295 *
296 * A reference is taken to both the local and remote nodes, the caller must use
297 * v4l2_fwnode_put_link() to drop the references when done with the
298 * link.
299 *
300 * Return: 0 on success, or -ENOLINK if the remote endpoint fwnode can't be
301 * found.
302 */
303int v4l2_fwnode_parse_link(struct fwnode_handle *fwnode,
304 struct v4l2_fwnode_link *link);
305
306/**
307 * v4l2_fwnode_put_link() - drop references to nodes in a link
308 * @link: pointer to the V4L2 fwnode link data structure
309 *
310 * Drop references to the local and remote nodes in the link. This function
311 * must be called on every link parsed with v4l2_fwnode_parse_link().
312 */
313void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link);
314
315/**
316 * v4l2_fwnode_connector_free() - free the V4L2 connector acquired memory
317 * @connector: the V4L2 connector resources of which are to be released
318 *
319 * Free all allocated memory and put all links acquired by
320 * v4l2_fwnode_connector_parse() and v4l2_fwnode_connector_add_link().
321 *
322 * It is safe to call this function with NULL argument or on a V4L2 connector
323 * the parsing of which failed.
324 */
325void v4l2_fwnode_connector_free(struct v4l2_fwnode_connector *connector);
326
327/**
328 * v4l2_fwnode_connector_parse() - initialize the 'struct v4l2_fwnode_connector'
329 * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector
330 * is connected to or to the connector endpoint fwnode handle.
331 * @connector: pointer to the V4L2 fwnode connector data structure
332 *
333 * Fill the &struct v4l2_fwnode_connector with the connector type, label and
334 * all &enum v4l2_connector_type specific connector data. The label is optional
335 * so it is set to %NULL if no one was found. The function initialize the links
336 * to zero. Adding links to the connector is done by calling
337 * v4l2_fwnode_connector_add_link().
338 *
339 * The memory allocated for the label must be freed when no longer needed.
340 * Freeing the memory is done by v4l2_fwnode_connector_free().
341 *
342 * Return:
343 * * %0 on success or a negative error code on failure:
344 * * %-EINVAL if @fwnode is invalid
345 * * %-ENOTCONN if connector type is unknown or connector device can't be found
346 */
347int v4l2_fwnode_connector_parse(struct fwnode_handle *fwnode,
348 struct v4l2_fwnode_connector *connector);
349
350/**
351 * v4l2_fwnode_connector_add_link - add a link between a connector node and
352 * a v4l2-subdev node.
353 * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector
354 * is connected to
355 * @connector: pointer to the V4L2 fwnode connector data structure
356 *
357 * Add a new &struct v4l2_connector_link link to the
358 * &struct v4l2_fwnode_connector connector links list. The link local_node
359 * points to the connector node, the remote_node to the host v4l2 (sub)dev.
360 *
361 * The taken references to remote_node and local_node must be dropped and the
362 * allocated memory must be freed when no longer needed. Both is done by calling
363 * v4l2_fwnode_connector_free().
364 *
365 * Return:
366 * * %0 on success or a negative error code on failure:
367 * * %-EINVAL if @fwnode or @connector is invalid or @connector type is unknown
368 * * %-ENOMEM on link memory allocation failure
369 * * %-ENOTCONN if remote connector device can't be found
370 * * %-ENOLINK if link parsing between v4l2 (sub)dev and connector fails
371 */
372int v4l2_fwnode_connector_add_link(struct fwnode_handle *fwnode,
373 struct v4l2_fwnode_connector *connector);
374
375/**
376 * v4l2_fwnode_device_parse() - parse fwnode device properties
377 * @dev: pointer to &struct device
378 * @props: pointer to &struct v4l2_fwnode_device_properties where to store the
379 * parsed properties values
380 *
381 * This function parses and validates the V4L2 fwnode device properties from the
382 * firmware interface, and fills the @struct v4l2_fwnode_device_properties
383 * provided by the caller.
384 *
385 * Return:
386 * % 0 on success
387 * %-EINVAL if a parsed property value is not valid
388 */
389int v4l2_fwnode_device_parse(struct device *dev,
390 struct v4l2_fwnode_device_properties *props);
391
392/* Helper macros to access the connector links. */
393
394/** v4l2_connector_last_link - Helper macro to get the first
395 * &struct v4l2_fwnode_connector link
396 * @v4l2c: &struct v4l2_fwnode_connector owning the connector links
397 *
398 * This marco returns the first added &struct v4l2_connector_link connector
399 * link or @NULL if the connector has no links.
400 */
401#define v4l2_connector_first_link(v4l2c) \
402 list_first_entry_or_null(&(v4l2c)->links, \
403 struct v4l2_connector_link, head)
404
405/** v4l2_connector_last_link - Helper macro to get the last
406 * &struct v4l2_fwnode_connector link
407 * @v4l2c: &struct v4l2_fwnode_connector owning the connector links
408 *
409 * This marco returns the last &struct v4l2_connector_link added connector link.
410 */
411#define v4l2_connector_last_link(v4l2c) \
412 list_last_entry(&(v4l2c)->links, struct v4l2_connector_link, head)
413
414#endif /* _V4L2_FWNODE_H */
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * V4L2 fwnode binding parsing library
4 *
5 * Copyright (c) 2016 Intel Corporation.
6 * Author: Sakari Ailus <sakari.ailus@linux.intel.com>
7 *
8 * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd.
9 * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
10 *
11 * Copyright (C) 2012 Renesas Electronics Corp.
12 * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
13 */
14#ifndef _V4L2_FWNODE_H
15#define _V4L2_FWNODE_H
16
17#include <linux/errno.h>
18#include <linux/fwnode.h>
19#include <linux/list.h>
20#include <linux/types.h>
21
22#include <media/v4l2-mediabus.h>
23
24struct fwnode_handle;
25struct v4l2_async_notifier;
26struct v4l2_async_subdev;
27
28#define V4L2_FWNODE_CSI2_MAX_DATA_LANES 4
29
30/**
31 * struct v4l2_fwnode_bus_mipi_csi2 - MIPI CSI-2 bus data structure
32 * @flags: media bus (V4L2_MBUS_*) flags
33 * @data_lanes: an array of physical data lane indexes
34 * @clock_lane: physical lane index of the clock lane
35 * @num_data_lanes: number of data lanes
36 * @lane_polarities: polarity of the lanes. The order is the same of
37 * the physical lanes.
38 */
39struct v4l2_fwnode_bus_mipi_csi2 {
40 unsigned int flags;
41 unsigned char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES];
42 unsigned char clock_lane;
43 unsigned short num_data_lanes;
44 bool lane_polarities[1 + V4L2_FWNODE_CSI2_MAX_DATA_LANES];
45};
46
47/**
48 * struct v4l2_fwnode_bus_parallel - parallel data bus data structure
49 * @flags: media bus (V4L2_MBUS_*) flags
50 * @bus_width: bus width in bits
51 * @data_shift: data shift in bits
52 */
53struct v4l2_fwnode_bus_parallel {
54 unsigned int flags;
55 unsigned char bus_width;
56 unsigned char data_shift;
57};
58
59/**
60 * struct v4l2_fwnode_bus_mipi_csi1 - CSI-1/CCP2 data bus structure
61 * @clock_inv: polarity of clock/strobe signal
62 * false - not inverted, true - inverted
63 * @strobe: false - data/clock, true - data/strobe
64 * @lane_polarity: the polarities of the clock (index 0) and data lanes
65 * index (1)
66 * @data_lane: the number of the data lane
67 * @clock_lane: the number of the clock lane
68 */
69struct v4l2_fwnode_bus_mipi_csi1 {
70 unsigned char clock_inv:1;
71 unsigned char strobe:1;
72 bool lane_polarity[2];
73 unsigned char data_lane;
74 unsigned char clock_lane;
75};
76
77/**
78 * struct v4l2_fwnode_endpoint - the endpoint data structure
79 * @base: fwnode endpoint of the v4l2_fwnode
80 * @bus_type: bus type
81 * @bus: union with bus configuration data structure
82 * @bus.parallel: embedded &struct v4l2_fwnode_bus_parallel.
83 * Used if the bus is parallel.
84 * @bus.mipi_csi1: embedded &struct v4l2_fwnode_bus_mipi_csi1.
85 * Used if the bus is MIPI Alliance's Camera Serial
86 * Interface version 1 (MIPI CSI1) or Standard
87 * Mobile Imaging Architecture's Compact Camera Port 2
88 * (SMIA CCP2).
89 * @bus.mipi_csi2: embedded &struct v4l2_fwnode_bus_mipi_csi2.
90 * Used if the bus is MIPI Alliance's Camera Serial
91 * Interface version 2 (MIPI CSI2).
92 * @link_frequencies: array of supported link frequencies
93 * @nr_of_link_frequencies: number of elements in link_frequenccies array
94 */
95struct v4l2_fwnode_endpoint {
96 struct fwnode_endpoint base;
97 /*
98 * Fields below this line will be zeroed by
99 * v4l2_fwnode_endpoint_parse()
100 */
101 enum v4l2_mbus_type bus_type;
102 union {
103 struct v4l2_fwnode_bus_parallel parallel;
104 struct v4l2_fwnode_bus_mipi_csi1 mipi_csi1;
105 struct v4l2_fwnode_bus_mipi_csi2 mipi_csi2;
106 } bus;
107 u64 *link_frequencies;
108 unsigned int nr_of_link_frequencies;
109};
110
111/**
112 * V4L2_FWNODE_PROPERTY_UNSET - identify a non initialized property
113 *
114 * All properties in &struct v4l2_fwnode_device_properties are initialized
115 * to this value.
116 */
117#define V4L2_FWNODE_PROPERTY_UNSET (-1U)
118
119/**
120 * enum v4l2_fwnode_orientation - possible device orientation
121 * @V4L2_FWNODE_ORIENTATION_FRONT: device installed on the front side
122 * @V4L2_FWNODE_ORIENTATION_BACK: device installed on the back side
123 * @V4L2_FWNODE_ORIENTATION_EXTERNAL: device externally located
124 */
125enum v4l2_fwnode_orientation {
126 V4L2_FWNODE_ORIENTATION_FRONT,
127 V4L2_FWNODE_ORIENTATION_BACK,
128 V4L2_FWNODE_ORIENTATION_EXTERNAL
129};
130
131/**
132 * struct v4l2_fwnode_device_properties - fwnode device properties
133 * @orientation: device orientation. See &enum v4l2_fwnode_orientation
134 * @rotation: device rotation
135 */
136struct v4l2_fwnode_device_properties {
137 enum v4l2_fwnode_orientation orientation;
138 unsigned int rotation;
139};
140
141/**
142 * struct v4l2_fwnode_link - a link between two endpoints
143 * @local_node: pointer to device_node of this endpoint
144 * @local_port: identifier of the port this endpoint belongs to
145 * @local_id: identifier of the id this endpoint belongs to
146 * @remote_node: pointer to device_node of the remote endpoint
147 * @remote_port: identifier of the port the remote endpoint belongs to
148 * @remote_id: identifier of the id the remote endpoint belongs to
149 */
150struct v4l2_fwnode_link {
151 struct fwnode_handle *local_node;
152 unsigned int local_port;
153 unsigned int local_id;
154 struct fwnode_handle *remote_node;
155 unsigned int remote_port;
156 unsigned int remote_id;
157};
158
159/**
160 * enum v4l2_connector_type - connector type
161 * @V4L2_CONN_UNKNOWN: unknown connector type, no V4L2 connector configuration
162 * @V4L2_CONN_COMPOSITE: analog composite connector
163 * @V4L2_CONN_SVIDEO: analog svideo connector
164 */
165enum v4l2_connector_type {
166 V4L2_CONN_UNKNOWN,
167 V4L2_CONN_COMPOSITE,
168 V4L2_CONN_SVIDEO,
169};
170
171/**
172 * struct v4l2_connector_link - connector link data structure
173 * @head: structure to be used to add the link to the
174 * &struct v4l2_fwnode_connector
175 * @fwnode_link: &struct v4l2_fwnode_link link between the connector and the
176 * device the connector belongs to.
177 */
178struct v4l2_connector_link {
179 struct list_head head;
180 struct v4l2_fwnode_link fwnode_link;
181};
182
183/**
184 * struct v4l2_fwnode_connector_analog - analog connector data structure
185 * @sdtv_stds: sdtv standards this connector supports, set to V4L2_STD_ALL
186 * if no restrictions are specified.
187 */
188struct v4l2_fwnode_connector_analog {
189 v4l2_std_id sdtv_stds;
190};
191
192/**
193 * struct v4l2_fwnode_connector - the connector data structure
194 * @name: the connector device name
195 * @label: optional connector label
196 * @type: connector type
197 * @links: list of all connector &struct v4l2_connector_link links
198 * @nr_of_links: total number of links
199 * @connector: connector configuration
200 * @connector.analog: analog connector configuration
201 * &struct v4l2_fwnode_connector_analog
202 */
203struct v4l2_fwnode_connector {
204 const char *name;
205 const char *label;
206 enum v4l2_connector_type type;
207 struct list_head links;
208 unsigned int nr_of_links;
209
210 union {
211 struct v4l2_fwnode_connector_analog analog;
212 /* future connectors */
213 } connector;
214};
215
216/**
217 * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties
218 * @fwnode: pointer to the endpoint's fwnode handle
219 * @vep: pointer to the V4L2 fwnode data structure
220 *
221 * This function parses the V4L2 fwnode endpoint specific parameters from the
222 * firmware. The caller is responsible for assigning @vep.bus_type to a valid
223 * media bus type. The caller may also set the default configuration for the
224 * endpoint --- a configuration that shall be in line with the DT binding
225 * documentation. Should a device support multiple bus types, the caller may
226 * call this function once the correct type is found --- with a default
227 * configuration valid for that type.
228 *
229 * As a compatibility means guessing the bus type is also supported by setting
230 * @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default
231 * configuration in this case as the defaults are specific to a given bus type.
232 * This functionality is deprecated and should not be used in new drivers and it
233 * is only supported for CSI-2 D-PHY, parallel and Bt.656 buses.
234 *
235 * The function does not change the V4L2 fwnode endpoint state if it fails.
236 *
237 * NOTE: This function does not parse properties the size of which is variable
238 * without a low fixed limit. Please use v4l2_fwnode_endpoint_alloc_parse() in
239 * new drivers instead.
240 *
241 * Return: %0 on success or a negative error code on failure:
242 * %-ENOMEM on memory allocation failure
243 * %-EINVAL on parsing failure
244 * %-ENXIO on mismatching bus types
245 */
246int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode,
247 struct v4l2_fwnode_endpoint *vep);
248
249/**
250 * v4l2_fwnode_endpoint_free() - free the V4L2 fwnode acquired by
251 * v4l2_fwnode_endpoint_alloc_parse()
252 * @vep: the V4L2 fwnode the resources of which are to be released
253 *
254 * It is safe to call this function with NULL argument or on a V4L2 fwnode the
255 * parsing of which failed.
256 */
257void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep);
258
259/**
260 * v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties
261 * @fwnode: pointer to the endpoint's fwnode handle
262 * @vep: pointer to the V4L2 fwnode data structure
263 *
264 * This function parses the V4L2 fwnode endpoint specific parameters from the
265 * firmware. The caller is responsible for assigning @vep.bus_type to a valid
266 * media bus type. The caller may also set the default configuration for the
267 * endpoint --- a configuration that shall be in line with the DT binding
268 * documentation. Should a device support multiple bus types, the caller may
269 * call this function once the correct type is found --- with a default
270 * configuration valid for that type.
271 *
272 * As a compatibility means guessing the bus type is also supported by setting
273 * @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default
274 * configuration in this case as the defaults are specific to a given bus type.
275 * This functionality is deprecated and should not be used in new drivers and it
276 * is only supported for CSI-2 D-PHY, parallel and Bt.656 buses.
277 *
278 * The function does not change the V4L2 fwnode endpoint state if it fails.
279 *
280 * v4l2_fwnode_endpoint_alloc_parse() has two important differences to
281 * v4l2_fwnode_endpoint_parse():
282 *
283 * 1. It also parses variable size data.
284 *
285 * 2. The memory it has allocated to store the variable size data must be freed
286 * using v4l2_fwnode_endpoint_free() when no longer needed.
287 *
288 * Return: %0 on success or a negative error code on failure:
289 * %-ENOMEM on memory allocation failure
290 * %-EINVAL on parsing failure
291 * %-ENXIO on mismatching bus types
292 */
293int v4l2_fwnode_endpoint_alloc_parse(struct fwnode_handle *fwnode,
294 struct v4l2_fwnode_endpoint *vep);
295
296/**
297 * v4l2_fwnode_parse_link() - parse a link between two endpoints
298 * @fwnode: pointer to the endpoint's fwnode at the local end of the link
299 * @link: pointer to the V4L2 fwnode link data structure
300 *
301 * Fill the link structure with the local and remote nodes and port numbers.
302 * The local_node and remote_node fields are set to point to the local and
303 * remote port's parent nodes respectively (the port parent node being the
304 * parent node of the port node if that node isn't a 'ports' node, or the
305 * grand-parent node of the port node otherwise).
306 *
307 * A reference is taken to both the local and remote nodes, the caller must use
308 * v4l2_fwnode_put_link() to drop the references when done with the
309 * link.
310 *
311 * Return: 0 on success, or -ENOLINK if the remote endpoint fwnode can't be
312 * found.
313 */
314int v4l2_fwnode_parse_link(struct fwnode_handle *fwnode,
315 struct v4l2_fwnode_link *link);
316
317/**
318 * v4l2_fwnode_put_link() - drop references to nodes in a link
319 * @link: pointer to the V4L2 fwnode link data structure
320 *
321 * Drop references to the local and remote nodes in the link. This function
322 * must be called on every link parsed with v4l2_fwnode_parse_link().
323 */
324void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link);
325
326/**
327 * v4l2_fwnode_connector_free() - free the V4L2 connector acquired memory
328 * @connector: the V4L2 connector resources of which are to be released
329 *
330 * Free all allocated memory and put all links acquired by
331 * v4l2_fwnode_connector_parse() and v4l2_fwnode_connector_add_link().
332 *
333 * It is safe to call this function with NULL argument or on a V4L2 connector
334 * the parsing of which failed.
335 */
336void v4l2_fwnode_connector_free(struct v4l2_fwnode_connector *connector);
337
338/**
339 * v4l2_fwnode_connector_parse() - initialize the 'struct v4l2_fwnode_connector'
340 * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector
341 * is connected to or to the connector endpoint fwnode handle.
342 * @connector: pointer to the V4L2 fwnode connector data structure
343 *
344 * Fill the &struct v4l2_fwnode_connector with the connector type, label and
345 * all &enum v4l2_connector_type specific connector data. The label is optional
346 * so it is set to %NULL if no one was found. The function initialize the links
347 * to zero. Adding links to the connector is done by calling
348 * v4l2_fwnode_connector_add_link().
349 *
350 * The memory allocated for the label must be freed when no longer needed.
351 * Freeing the memory is done by v4l2_fwnode_connector_free().
352 *
353 * Return:
354 * * %0 on success or a negative error code on failure:
355 * * %-EINVAL if @fwnode is invalid
356 * * %-ENOTCONN if connector type is unknown or connector device can't be found
357 */
358int v4l2_fwnode_connector_parse(struct fwnode_handle *fwnode,
359 struct v4l2_fwnode_connector *connector);
360
361/**
362 * v4l2_fwnode_connector_add_link - add a link between a connector node and
363 * a v4l2-subdev node.
364 * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector
365 * is connected to
366 * @connector: pointer to the V4L2 fwnode connector data structure
367 *
368 * Add a new &struct v4l2_connector_link link to the
369 * &struct v4l2_fwnode_connector connector links list. The link local_node
370 * points to the connector node, the remote_node to the host v4l2 (sub)dev.
371 *
372 * The taken references to remote_node and local_node must be dropped and the
373 * allocated memory must be freed when no longer needed. Both is done by calling
374 * v4l2_fwnode_connector_free().
375 *
376 * Return:
377 * * %0 on success or a negative error code on failure:
378 * * %-EINVAL if @fwnode or @connector is invalid or @connector type is unknown
379 * * %-ENOMEM on link memory allocation failure
380 * * %-ENOTCONN if remote connector device can't be found
381 * * %-ENOLINK if link parsing between v4l2 (sub)dev and connector fails
382 */
383int v4l2_fwnode_connector_add_link(struct fwnode_handle *fwnode,
384 struct v4l2_fwnode_connector *connector);
385
386/**
387 * v4l2_fwnode_device_parse() - parse fwnode device properties
388 * @dev: pointer to &struct device
389 * @props: pointer to &struct v4l2_fwnode_device_properties where to store the
390 * parsed properties values
391 *
392 * This function parses and validates the V4L2 fwnode device properties from the
393 * firmware interface, and fills the @struct v4l2_fwnode_device_properties
394 * provided by the caller.
395 *
396 * Return:
397 * % 0 on success
398 * %-EINVAL if a parsed property value is not valid
399 */
400int v4l2_fwnode_device_parse(struct device *dev,
401 struct v4l2_fwnode_device_properties *props);
402
403/**
404 * typedef parse_endpoint_func - Driver's callback function to be called on
405 * each V4L2 fwnode endpoint.
406 *
407 * @dev: pointer to &struct device
408 * @vep: pointer to &struct v4l2_fwnode_endpoint
409 * @asd: pointer to &struct v4l2_async_subdev
410 *
411 * Return:
412 * * %0 on success
413 * * %-ENOTCONN if the endpoint is to be skipped but this
414 * should not be considered as an error
415 * * %-EINVAL if the endpoint configuration is invalid
416 */
417typedef int (*parse_endpoint_func)(struct device *dev,
418 struct v4l2_fwnode_endpoint *vep,
419 struct v4l2_async_subdev *asd);
420
421/**
422 * v4l2_async_notifier_parse_fwnode_endpoints - Parse V4L2 fwnode endpoints in a
423 * device node
424 * @dev: the device the endpoints of which are to be parsed
425 * @notifier: notifier for @dev
426 * @asd_struct_size: size of the driver's async sub-device struct, including
427 * sizeof(struct v4l2_async_subdev). The &struct
428 * v4l2_async_subdev shall be the first member of
429 * the driver's async sub-device struct, i.e. both
430 * begin at the same memory address.
431 * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
432 * endpoint. Optional.
433 *
434 * Parse the fwnode endpoints of the @dev device and populate the async sub-
435 * devices list in the notifier. The @parse_endpoint callback function is
436 * called for each endpoint with the corresponding async sub-device pointer to
437 * let the caller initialize the driver-specific part of the async sub-device
438 * structure.
439 *
440 * The notifier memory shall be zeroed before this function is called on the
441 * notifier.
442 *
443 * This function may not be called on a registered notifier and may be called on
444 * a notifier only once.
445 *
446 * The &struct v4l2_fwnode_endpoint passed to the callback function
447 * @parse_endpoint is released once the function is finished. If there is a need
448 * to retain that configuration, the user needs to allocate memory for it.
449 *
450 * Any notifier populated using this function must be released with a call to
451 * v4l2_async_notifier_cleanup() after it has been unregistered and the async
452 * sub-devices are no longer in use, even if the function returned an error.
453 *
454 * Return: %0 on success, including when no async sub-devices are found
455 * %-ENOMEM if memory allocation failed
456 * %-EINVAL if graph or endpoint parsing failed
457 * Other error codes as returned by @parse_endpoint
458 */
459int
460v4l2_async_notifier_parse_fwnode_endpoints(struct device *dev,
461 struct v4l2_async_notifier *notifier,
462 size_t asd_struct_size,
463 parse_endpoint_func parse_endpoint);
464
465/**
466 * v4l2_async_notifier_parse_fwnode_endpoints_by_port - Parse V4L2 fwnode
467 * endpoints of a port in a
468 * device node
469 * @dev: the device the endpoints of which are to be parsed
470 * @notifier: notifier for @dev
471 * @asd_struct_size: size of the driver's async sub-device struct, including
472 * sizeof(struct v4l2_async_subdev). The &struct
473 * v4l2_async_subdev shall be the first member of
474 * the driver's async sub-device struct, i.e. both
475 * begin at the same memory address.
476 * @port: port number where endpoints are to be parsed
477 * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
478 * endpoint. Optional.
479 *
480 * This function is just like v4l2_async_notifier_parse_fwnode_endpoints() with
481 * the exception that it only parses endpoints in a given port. This is useful
482 * on devices that have both sinks and sources: the async sub-devices connected
483 * to sources have already been configured by another driver (on capture
484 * devices). In this case the driver must know which ports to parse.
485 *
486 * Parse the fwnode endpoints of the @dev device on a given @port and populate
487 * the async sub-devices list of the notifier. The @parse_endpoint callback
488 * function is called for each endpoint with the corresponding async sub-device
489 * pointer to let the caller initialize the driver-specific part of the async
490 * sub-device structure.
491 *
492 * The notifier memory shall be zeroed before this function is called on the
493 * notifier the first time.
494 *
495 * This function may not be called on a registered notifier and may be called on
496 * a notifier only once per port.
497 *
498 * The &struct v4l2_fwnode_endpoint passed to the callback function
499 * @parse_endpoint is released once the function is finished. If there is a need
500 * to retain that configuration, the user needs to allocate memory for it.
501 *
502 * Any notifier populated using this function must be released with a call to
503 * v4l2_async_notifier_cleanup() after it has been unregistered and the async
504 * sub-devices are no longer in use, even if the function returned an error.
505 *
506 * Return: %0 on success, including when no async sub-devices are found
507 * %-ENOMEM if memory allocation failed
508 * %-EINVAL if graph or endpoint parsing failed
509 * Other error codes as returned by @parse_endpoint
510 */
511int
512v4l2_async_notifier_parse_fwnode_endpoints_by_port(struct device *dev,
513 struct v4l2_async_notifier *notifier,
514 size_t asd_struct_size,
515 unsigned int port,
516 parse_endpoint_func parse_endpoint);
517
518/**
519 * v4l2_fwnode_reference_parse_sensor_common - parse common references on
520 * sensors for async sub-devices
521 * @dev: the device node the properties of which are parsed for references
522 * @notifier: the async notifier where the async subdevs will be added
523 *
524 * Parse common sensor properties for remote devices related to the
525 * sensor and set up async sub-devices for them.
526 *
527 * Any notifier populated using this function must be released with a call to
528 * v4l2_async_notifier_release() after it has been unregistered and the async
529 * sub-devices are no longer in use, even in the case the function returned an
530 * error.
531 *
532 * Return: 0 on success
533 * -ENOMEM if memory allocation failed
534 * -EINVAL if property parsing failed
535 */
536int v4l2_async_notifier_parse_fwnode_sensor_common(struct device *dev,
537 struct v4l2_async_notifier *notifier);
538
539/* Helper macros to access the connector links. */
540
541/** v4l2_connector_last_link - Helper macro to get the first
542 * &struct v4l2_fwnode_connector link
543 * @v4l2c: &struct v4l2_fwnode_connector owning the connector links
544 *
545 * This marco returns the first added &struct v4l2_connector_link connector
546 * link or @NULL if the connector has no links.
547 */
548#define v4l2_connector_first_link(v4l2c) \
549 list_first_entry_or_null(&(v4l2c)->links, \
550 struct v4l2_connector_link, head)
551
552/** v4l2_connector_last_link - Helper macro to get the last
553 * &struct v4l2_fwnode_connector link
554 * @v4l2c: &struct v4l2_fwnode_connector owning the connector links
555 *
556 * This marco returns the last &struct v4l2_connector_link added connector link.
557 */
558#define v4l2_connector_last_link(v4l2c) \
559 list_last_entry(&(v4l2c)->links, struct v4l2_connector_link, head)
560
561#endif /* _V4L2_FWNODE_H */