Loading...
Note: File does not exist in v5.9.
1.. SPDX-License-Identifier: GPL-2.0
2.. Copyright (C) 2020, Google LLC.
3
4Kernel Electric-Fence (KFENCE)
5==============================
6
7Kernel Electric-Fence (KFENCE) is a low-overhead sampling-based memory safety
8error detector. KFENCE detects heap out-of-bounds access, use-after-free, and
9invalid-free errors.
10
11KFENCE is designed to be enabled in production kernels, and has near zero
12performance overhead. Compared to KASAN, KFENCE trades performance for
13precision. The main motivation behind KFENCE's design, is that with enough
14total uptime KFENCE will detect bugs in code paths not typically exercised by
15non-production test workloads. One way to quickly achieve a large enough total
16uptime is when the tool is deployed across a large fleet of machines.
17
18Usage
19-----
20
21To enable KFENCE, configure the kernel with::
22
23 CONFIG_KFENCE=y
24
25To build a kernel with KFENCE support, but disabled by default (to enable, set
26``kfence.sample_interval`` to non-zero value), configure the kernel with::
27
28 CONFIG_KFENCE=y
29 CONFIG_KFENCE_SAMPLE_INTERVAL=0
30
31KFENCE provides several other configuration options to customize behaviour (see
32the respective help text in ``lib/Kconfig.kfence`` for more info).
33
34Tuning performance
35~~~~~~~~~~~~~~~~~~
36
37The most important parameter is KFENCE's sample interval, which can be set via
38the kernel boot parameter ``kfence.sample_interval`` in milliseconds. The
39sample interval determines the frequency with which heap allocations will be
40guarded by KFENCE. The default is configurable via the Kconfig option
41``CONFIG_KFENCE_SAMPLE_INTERVAL``. Setting ``kfence.sample_interval=0``
42disables KFENCE.
43
44The sample interval controls a timer that sets up KFENCE allocations. By
45default, to keep the real sample interval predictable, the normal timer also
46causes CPU wake-ups when the system is completely idle. This may be undesirable
47on power-constrained systems. The boot parameter ``kfence.deferrable=1``
48instead switches to a "deferrable" timer which does not force CPU wake-ups on
49idle systems, at the risk of unpredictable sample intervals. The default is
50configurable via the Kconfig option ``CONFIG_KFENCE_DEFERRABLE``.
51
52.. warning::
53 The KUnit test suite is very likely to fail when using a deferrable timer
54 since it currently causes very unpredictable sample intervals.
55
56By default KFENCE will only sample 1 heap allocation within each sample
57interval. *Burst mode* allows to sample successive heap allocations, where the
58kernel boot parameter ``kfence.burst`` can be set to a non-zero value which
59denotes the *additional* successive allocations within a sample interval;
60setting ``kfence.burst=N`` means that ``1 + N`` successive allocations are
61attempted through KFENCE for each sample interval.
62
63The KFENCE memory pool is of fixed size, and if the pool is exhausted, no
64further KFENCE allocations occur. With ``CONFIG_KFENCE_NUM_OBJECTS`` (default
65255), the number of available guarded objects can be controlled. Each object
66requires 2 pages, one for the object itself and the other one used as a guard
67page; object pages are interleaved with guard pages, and every object page is
68therefore surrounded by two guard pages.
69
70The total memory dedicated to the KFENCE memory pool can be computed as::
71
72 ( #objects + 1 ) * 2 * PAGE_SIZE
73
74Using the default config, and assuming a page size of 4 KiB, results in
75dedicating 2 MiB to the KFENCE memory pool.
76
77Note: On architectures that support huge pages, KFENCE will ensure that the
78pool is using pages of size ``PAGE_SIZE``. This will result in additional page
79tables being allocated.
80
81Error reports
82~~~~~~~~~~~~~
83
84A typical out-of-bounds access looks like this::
85
86 ==================================================================
87 BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0xa6/0x234
88
89 Out-of-bounds read at 0xffff8c3f2e291fff (1B left of kfence-#72):
90 test_out_of_bounds_read+0xa6/0x234
91 kunit_try_run_case+0x61/0xa0
92 kunit_generic_run_threadfn_adapter+0x16/0x30
93 kthread+0x176/0x1b0
94 ret_from_fork+0x22/0x30
95
96 kfence-#72: 0xffff8c3f2e292000-0xffff8c3f2e29201f, size=32, cache=kmalloc-32
97
98 allocated by task 484 on cpu 0 at 32.919330s:
99 test_alloc+0xfe/0x738
100 test_out_of_bounds_read+0x9b/0x234
101 kunit_try_run_case+0x61/0xa0
102 kunit_generic_run_threadfn_adapter+0x16/0x30
103 kthread+0x176/0x1b0
104 ret_from_fork+0x22/0x30
105
106 CPU: 0 PID: 484 Comm: kunit_try_catch Not tainted 5.13.0-rc3+ #7
107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
108 ==================================================================
109
110The header of the report provides a short summary of the function involved in
111the access. It is followed by more detailed information about the access and
112its origin. Note that, real kernel addresses are only shown when using the
113kernel command line option ``no_hash_pointers``.
114
115Use-after-free accesses are reported as::
116
117 ==================================================================
118 BUG: KFENCE: use-after-free read in test_use_after_free_read+0xb3/0x143
119
120 Use-after-free read at 0xffff8c3f2e2a0000 (in kfence-#79):
121 test_use_after_free_read+0xb3/0x143
122 kunit_try_run_case+0x61/0xa0
123 kunit_generic_run_threadfn_adapter+0x16/0x30
124 kthread+0x176/0x1b0
125 ret_from_fork+0x22/0x30
126
127 kfence-#79: 0xffff8c3f2e2a0000-0xffff8c3f2e2a001f, size=32, cache=kmalloc-32
128
129 allocated by task 488 on cpu 2 at 33.871326s:
130 test_alloc+0xfe/0x738
131 test_use_after_free_read+0x76/0x143
132 kunit_try_run_case+0x61/0xa0
133 kunit_generic_run_threadfn_adapter+0x16/0x30
134 kthread+0x176/0x1b0
135 ret_from_fork+0x22/0x30
136
137 freed by task 488 on cpu 2 at 33.871358s:
138 test_use_after_free_read+0xa8/0x143
139 kunit_try_run_case+0x61/0xa0
140 kunit_generic_run_threadfn_adapter+0x16/0x30
141 kthread+0x176/0x1b0
142 ret_from_fork+0x22/0x30
143
144 CPU: 2 PID: 488 Comm: kunit_try_catch Tainted: G B 5.13.0-rc3+ #7
145 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
146 ==================================================================
147
148KFENCE also reports on invalid frees, such as double-frees::
149
150 ==================================================================
151 BUG: KFENCE: invalid free in test_double_free+0xdc/0x171
152
153 Invalid free of 0xffff8c3f2e2a4000 (in kfence-#81):
154 test_double_free+0xdc/0x171
155 kunit_try_run_case+0x61/0xa0
156 kunit_generic_run_threadfn_adapter+0x16/0x30
157 kthread+0x176/0x1b0
158 ret_from_fork+0x22/0x30
159
160 kfence-#81: 0xffff8c3f2e2a4000-0xffff8c3f2e2a401f, size=32, cache=kmalloc-32
161
162 allocated by task 490 on cpu 1 at 34.175321s:
163 test_alloc+0xfe/0x738
164 test_double_free+0x76/0x171
165 kunit_try_run_case+0x61/0xa0
166 kunit_generic_run_threadfn_adapter+0x16/0x30
167 kthread+0x176/0x1b0
168 ret_from_fork+0x22/0x30
169
170 freed by task 490 on cpu 1 at 34.175348s:
171 test_double_free+0xa8/0x171
172 kunit_try_run_case+0x61/0xa0
173 kunit_generic_run_threadfn_adapter+0x16/0x30
174 kthread+0x176/0x1b0
175 ret_from_fork+0x22/0x30
176
177 CPU: 1 PID: 490 Comm: kunit_try_catch Tainted: G B 5.13.0-rc3+ #7
178 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
179 ==================================================================
180
181KFENCE also uses pattern-based redzones on the other side of an object's guard
182page, to detect out-of-bounds writes on the unprotected side of the object.
183These are reported on frees::
184
185 ==================================================================
186 BUG: KFENCE: memory corruption in test_kmalloc_aligned_oob_write+0xef/0x184
187
188 Corrupted memory at 0xffff8c3f2e33aff9 [ 0xac . . . . . . ] (in kfence-#156):
189 test_kmalloc_aligned_oob_write+0xef/0x184
190 kunit_try_run_case+0x61/0xa0
191 kunit_generic_run_threadfn_adapter+0x16/0x30
192 kthread+0x176/0x1b0
193 ret_from_fork+0x22/0x30
194
195 kfence-#156: 0xffff8c3f2e33afb0-0xffff8c3f2e33aff8, size=73, cache=kmalloc-96
196
197 allocated by task 502 on cpu 7 at 42.159302s:
198 test_alloc+0xfe/0x738
199 test_kmalloc_aligned_oob_write+0x57/0x184
200 kunit_try_run_case+0x61/0xa0
201 kunit_generic_run_threadfn_adapter+0x16/0x30
202 kthread+0x176/0x1b0
203 ret_from_fork+0x22/0x30
204
205 CPU: 7 PID: 502 Comm: kunit_try_catch Tainted: G B 5.13.0-rc3+ #7
206 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
207 ==================================================================
208
209For such errors, the address where the corruption occurred as well as the
210invalidly written bytes (offset from the address) are shown; in this
211representation, '.' denote untouched bytes. In the example above ``0xac`` is
212the value written to the invalid address at offset 0, and the remaining '.'
213denote that no following bytes have been touched. Note that, real values are
214only shown if the kernel was booted with ``no_hash_pointers``; to avoid
215information disclosure otherwise, '!' is used instead to denote invalidly
216written bytes.
217
218And finally, KFENCE may also report on invalid accesses to any protected page
219where it was not possible to determine an associated object, e.g. if adjacent
220object pages had not yet been allocated::
221
222 ==================================================================
223 BUG: KFENCE: invalid read in test_invalid_access+0x26/0xe0
224
225 Invalid read at 0xffffffffb670b00a:
226 test_invalid_access+0x26/0xe0
227 kunit_try_run_case+0x51/0x85
228 kunit_generic_run_threadfn_adapter+0x16/0x30
229 kthread+0x137/0x160
230 ret_from_fork+0x22/0x30
231
232 CPU: 4 PID: 124 Comm: kunit_try_catch Tainted: G W 5.8.0-rc6+ #7
233 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
234 ==================================================================
235
236DebugFS interface
237~~~~~~~~~~~~~~~~~
238
239Some debugging information is exposed via debugfs:
240
241* The file ``/sys/kernel/debug/kfence/stats`` provides runtime statistics.
242
243* The file ``/sys/kernel/debug/kfence/objects`` provides a list of objects
244 allocated via KFENCE, including those already freed but protected.
245
246Implementation Details
247----------------------
248
249Guarded allocations are set up based on the sample interval. After expiration
250of the sample interval, the next allocation through the main allocator (SLAB or
251SLUB) returns a guarded allocation from the KFENCE object pool (allocation
252sizes up to PAGE_SIZE are supported). At this point, the timer is reset, and
253the next allocation is set up after the expiration of the interval.
254
255When using ``CONFIG_KFENCE_STATIC_KEYS=y``, KFENCE allocations are "gated"
256through the main allocator's fast-path by relying on static branches via the
257static keys infrastructure. The static branch is toggled to redirect the
258allocation to KFENCE. Depending on sample interval, target workloads, and
259system architecture, this may perform better than the simple dynamic branch.
260Careful benchmarking is recommended.
261
262KFENCE objects each reside on a dedicated page, at either the left or right
263page boundaries selected at random. The pages to the left and right of the
264object page are "guard pages", whose attributes are changed to a protected
265state, and cause page faults on any attempted access. Such page faults are then
266intercepted by KFENCE, which handles the fault gracefully by reporting an
267out-of-bounds access, and marking the page as accessible so that the faulting
268code can (wrongly) continue executing (set ``panic_on_warn`` to panic instead).
269
270To detect out-of-bounds writes to memory within the object's page itself,
271KFENCE also uses pattern-based redzones. For each object page, a redzone is set
272up for all non-object memory. For typical alignments, the redzone is only
273required on the unguarded side of an object. Because KFENCE must honor the
274cache's requested alignment, special alignments may result in unprotected gaps
275on either side of an object, all of which are redzoned.
276
277The following figure illustrates the page layout::
278
279 ---+-----------+-----------+-----------+-----------+-----------+---
280 | xxxxxxxxx | O : | xxxxxxxxx | : O | xxxxxxxxx |
281 | xxxxxxxxx | B : | xxxxxxxxx | : B | xxxxxxxxx |
282 | x GUARD x | J : RED- | x GUARD x | RED- : J | x GUARD x |
283 | xxxxxxxxx | E : ZONE | xxxxxxxxx | ZONE : E | xxxxxxxxx |
284 | xxxxxxxxx | C : | xxxxxxxxx | : C | xxxxxxxxx |
285 | xxxxxxxxx | T : | xxxxxxxxx | : T | xxxxxxxxx |
286 ---+-----------+-----------+-----------+-----------+-----------+---
287
288Upon deallocation of a KFENCE object, the object's page is again protected and
289the object is marked as freed. Any further access to the object causes a fault
290and KFENCE reports a use-after-free access. Freed objects are inserted at the
291tail of KFENCE's freelist, so that the least recently freed objects are reused
292first, and the chances of detecting use-after-frees of recently freed objects
293is increased.
294
295If pool utilization reaches 75% (default) or above, to reduce the risk of the
296pool eventually being fully occupied by allocated objects yet ensure diverse
297coverage of allocations, KFENCE limits currently covered allocations of the
298same source from further filling up the pool. The "source" of an allocation is
299based on its partial allocation stack trace. A side-effect is that this also
300limits frequent long-lived allocations (e.g. pagecache) of the same source
301filling up the pool permanently, which is the most common risk for the pool
302becoming full and the sampled allocation rate dropping to zero. The threshold
303at which to start limiting currently covered allocations can be configured via
304the boot parameter ``kfence.skip_covered_thresh`` (pool usage%).
305
306Interface
307---------
308
309The following describes the functions which are used by allocators as well as
310page handling code to set up and deal with KFENCE allocations.
311
312.. kernel-doc:: include/linux/kfence.h
313 :functions: is_kfence_address
314 kfence_shutdown_cache
315 kfence_alloc kfence_free __kfence_free
316 kfence_ksize kfence_object_start
317 kfence_handle_page_fault
318
319Related Tools
320-------------
321
322In userspace, a similar approach is taken by `GWP-ASan
323<http://llvm.org/docs/GwpAsan.html>`_. GWP-ASan also relies on guard pages and
324a sampling strategy to detect memory unsafety bugs at scale. KFENCE's design is
325directly influenced by GWP-ASan, and can be seen as its kernel sibling. Another
326similar but non-sampling approach, that also inspired the name "KFENCE", can be
327found in the userspace `Electric Fence Malloc Debugger
328<https://linux.die.net/man/3/efence>`_.
329
330In the kernel, several tools exist to debug memory access errors, and in
331particular KASAN can detect all bug classes that KFENCE can detect. While KASAN
332is more precise, relying on compiler instrumentation, this comes at a
333performance cost.
334
335It is worth highlighting that KASAN and KFENCE are complementary, with
336different target environments. For instance, KASAN is the better debugging-aid,
337where test cases or reproducers exists: due to the lower chance to detect the
338error, it would require more effort using KFENCE to debug. Deployments at scale
339that cannot afford to enable KASAN, however, would benefit from using KFENCE to
340discover bugs due to code paths not exercised by test cases or fuzzers.