Linux Audio

Check our new training course

Yocto distribution development and maintenance

Need a Yocto distribution for your embedded project?
Loading...
Note: File does not exist in v6.13.7.
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Intel Broadwell Wildcatpoint SST Audio
  4 *
  5 * Copyright (C) 2013, Intel Corporation. All rights reserved.
  6 */
  7
  8#include <linux/module.h>
  9#include <linux/platform_device.h>
 10#include <sound/core.h>
 11#include <sound/pcm.h>
 12#include <sound/soc.h>
 13#include <sound/jack.h>
 14#include <sound/pcm_params.h>
 15#include <sound/soc-acpi.h>
 16
 17#include "../common/sst-dsp.h"
 18#include "../haswell/sst-haswell-ipc.h"
 19
 20#include "../../codecs/rt286.h"
 21
 22static struct snd_soc_jack broadwell_headset;
 23/* Headset jack detection DAPM pins */
 24static struct snd_soc_jack_pin broadwell_headset_pins[] = {
 25	{
 26		.pin = "Mic Jack",
 27		.mask = SND_JACK_MICROPHONE,
 28	},
 29	{
 30		.pin = "Headphone Jack",
 31		.mask = SND_JACK_HEADPHONE,
 32	},
 33};
 34
 35static const struct snd_kcontrol_new broadwell_controls[] = {
 36	SOC_DAPM_PIN_SWITCH("Speaker"),
 37	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 38};
 39
 40static const struct snd_soc_dapm_widget broadwell_widgets[] = {
 41	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 42	SND_SOC_DAPM_SPK("Speaker", NULL),
 43	SND_SOC_DAPM_MIC("Mic Jack", NULL),
 44	SND_SOC_DAPM_MIC("DMIC1", NULL),
 45	SND_SOC_DAPM_MIC("DMIC2", NULL),
 46	SND_SOC_DAPM_LINE("Line Jack", NULL),
 47};
 48
 49static const struct snd_soc_dapm_route broadwell_rt286_map[] = {
 50
 51	/* speaker */
 52	{"Speaker", NULL, "SPOR"},
 53	{"Speaker", NULL, "SPOL"},
 54
 55	/* HP jack connectors - unknown if we have jack deteck */
 56	{"Headphone Jack", NULL, "HPO Pin"},
 57
 58	/* other jacks */
 59	{"MIC1", NULL, "Mic Jack"},
 60	{"LINE1", NULL, "Line Jack"},
 61
 62	/* digital mics */
 63	{"DMIC1 Pin", NULL, "DMIC1"},
 64	{"DMIC2 Pin", NULL, "DMIC2"},
 65
 66	/* CODEC BE connections */
 67	{"SSP0 CODEC IN", NULL, "AIF1 Capture"},
 68	{"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
 69};
 70
 71static int broadwell_rt286_codec_init(struct snd_soc_pcm_runtime *rtd)
 72{
 73	struct snd_soc_component *component = rtd->codec_dai->component;
 74	int ret = 0;
 75	ret = snd_soc_card_jack_new(rtd->card, "Headset",
 76		SND_JACK_HEADSET | SND_JACK_BTN_0, &broadwell_headset,
 77		broadwell_headset_pins, ARRAY_SIZE(broadwell_headset_pins));
 78	if (ret)
 79		return ret;
 80
 81	rt286_mic_detect(component, &broadwell_headset);
 82	return 0;
 83}
 84
 85
 86static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
 87			struct snd_pcm_hw_params *params)
 88{
 89	struct snd_interval *rate = hw_param_interval(params,
 90			SNDRV_PCM_HW_PARAM_RATE);
 91	struct snd_interval *channels = hw_param_interval(params,
 92						SNDRV_PCM_HW_PARAM_CHANNELS);
 93
 94	/* The ADSP will covert the FE rate to 48k, stereo */
 95	rate->min = rate->max = 48000;
 96	channels->min = channels->max = 2;
 97
 98	/* set SSP0 to 16 bit */
 99	params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
100	return 0;
101}
102
103static int broadwell_rt286_hw_params(struct snd_pcm_substream *substream,
104	struct snd_pcm_hw_params *params)
105{
106	struct snd_soc_pcm_runtime *rtd = substream->private_data;
107	struct snd_soc_dai *codec_dai = rtd->codec_dai;
108	int ret;
109
110	ret = snd_soc_dai_set_sysclk(codec_dai, RT286_SCLK_S_PLL, 24000000,
111		SND_SOC_CLOCK_IN);
112
113	if (ret < 0) {
114		dev_err(rtd->dev, "can't set codec sysclk configuration\n");
115		return ret;
116	}
117
118	return ret;
119}
120
121static const struct snd_soc_ops broadwell_rt286_ops = {
122	.hw_params = broadwell_rt286_hw_params,
123};
124
125#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
126static int broadwell_rtd_init(struct snd_soc_pcm_runtime *rtd)
127{
128	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
129	struct sst_pdata *pdata = dev_get_platdata(component->dev);
130	struct sst_hsw *broadwell = pdata->dsp;
131	int ret;
132
133	/* Set ADSP SSP port settings */
134	ret = sst_hsw_device_set_config(broadwell, SST_HSW_DEVICE_SSP_0,
135		SST_HSW_DEVICE_MCLK_FREQ_24_MHZ,
136		SST_HSW_DEVICE_CLOCK_MASTER, 9);
137	if (ret < 0) {
138		dev_err(rtd->dev, "error: failed to set device config\n");
139		return ret;
140	}
141
142	return 0;
143}
144#endif
145
146SND_SOC_DAILINK_DEF(system,
147	DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));
148
149SND_SOC_DAILINK_DEF(offload0,
150	DAILINK_COMP_ARRAY(COMP_CPU("Offload0 Pin")));
151
152SND_SOC_DAILINK_DEF(offload1,
153	DAILINK_COMP_ARRAY(COMP_CPU("Offload1 Pin")));
154
155SND_SOC_DAILINK_DEF(loopback,
156	DAILINK_COMP_ARRAY(COMP_CPU("Loopback Pin")));
157
158SND_SOC_DAILINK_DEF(dummy,
159	DAILINK_COMP_ARRAY(COMP_DUMMY()));
160
161SND_SOC_DAILINK_DEF(platform,
162	DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio")));
163
164SND_SOC_DAILINK_DEF(codec,
165	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-INT343A:00", "rt286-aif1")));
166
167/* broadwell digital audio interface glue - connects codec <--> CPU */
168static struct snd_soc_dai_link broadwell_rt286_dais[] = {
169	/* Front End DAI links */
170	{
171		.name = "System PCM",
172		.stream_name = "System Playback/Capture",
173		.dynamic = 1,
174#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
175		.init = broadwell_rtd_init,
176#endif
177		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
178		.dpcm_playback = 1,
179		.dpcm_capture = 1,
180		SND_SOC_DAILINK_REG(system, dummy, platform),
181	},
182	{
183		.name = "Offload0",
184		.stream_name = "Offload0 Playback",
185		.dynamic = 1,
186		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
187		.dpcm_playback = 1,
188		SND_SOC_DAILINK_REG(offload0, dummy, platform),
189	},
190	{
191		.name = "Offload1",
192		.stream_name = "Offload1 Playback",
193		.dynamic = 1,
194		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
195		.dpcm_playback = 1,
196		SND_SOC_DAILINK_REG(offload1, dummy, platform),
197	},
198	{
199		.name = "Loopback PCM",
200		.stream_name = "Loopback",
201		.dynamic = 1,
202		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
203		.dpcm_capture = 1,
204		SND_SOC_DAILINK_REG(loopback, dummy, platform),
205	},
206	/* Back End DAI links */
207	{
208		/* SSP0 - Codec */
209		.name = "Codec",
210		.id = 0,
211		.no_pcm = 1,
212		.init = broadwell_rt286_codec_init,
213		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
214			SND_SOC_DAIFMT_CBS_CFS,
215		.ignore_suspend = 1,
216		.ignore_pmdown_time = 1,
217		.be_hw_params_fixup = broadwell_ssp0_fixup,
218		.ops = &broadwell_rt286_ops,
219		.dpcm_playback = 1,
220		.dpcm_capture = 1,
221		SND_SOC_DAILINK_REG(dummy, codec, dummy),
222	},
223};
224
225static int broadwell_suspend(struct snd_soc_card *card){
226	struct snd_soc_component *component;
227
228	for_each_card_components(card, component) {
229		if (!strcmp(component->name, "i2c-INT343A:00")) {
230
231			dev_dbg(component->dev, "disabling jack detect before going to suspend.\n");
232			rt286_mic_detect(component, NULL);
233			break;
234		}
235	}
236	return 0;
237}
238
239static int broadwell_resume(struct snd_soc_card *card){
240	struct snd_soc_component *component;
241
242	for_each_card_components(card, component) {
243		if (!strcmp(component->name, "i2c-INT343A:00")) {
244
245			dev_dbg(component->dev, "enabling jack detect for resume.\n");
246			rt286_mic_detect(component, &broadwell_headset);
247			break;
248		}
249	}
250	return 0;
251}
252
253/* broadwell audio machine driver for WPT + RT286S */
254static struct snd_soc_card broadwell_rt286 = {
255	.name = "broadwell-rt286",
256	.owner = THIS_MODULE,
257	.dai_link = broadwell_rt286_dais,
258	.num_links = ARRAY_SIZE(broadwell_rt286_dais),
259	.controls = broadwell_controls,
260	.num_controls = ARRAY_SIZE(broadwell_controls),
261	.dapm_widgets = broadwell_widgets,
262	.num_dapm_widgets = ARRAY_SIZE(broadwell_widgets),
263	.dapm_routes = broadwell_rt286_map,
264	.num_dapm_routes = ARRAY_SIZE(broadwell_rt286_map),
265	.fully_routed = true,
266	.suspend_pre = broadwell_suspend,
267	.resume_post = broadwell_resume,
268};
269
270static int broadwell_audio_probe(struct platform_device *pdev)
271{
272	struct snd_soc_acpi_mach *mach;
273	int ret;
274
275	broadwell_rt286.dev = &pdev->dev;
276
277	/* override plaform name, if required */
278	mach = (&pdev->dev)->platform_data;
279	ret = snd_soc_fixup_dai_links_platform_name(&broadwell_rt286,
280						    mach->mach_params.platform);
281	if (ret)
282		return ret;
283
284	return devm_snd_soc_register_card(&pdev->dev, &broadwell_rt286);
285}
286
287static struct platform_driver broadwell_audio = {
288	.probe = broadwell_audio_probe,
289	.driver = {
290		.name = "broadwell-audio",
291	},
292};
293
294module_platform_driver(broadwell_audio)
295
296/* Module information */
297MODULE_AUTHOR("Liam Girdwood, Xingchao Wang");
298MODULE_DESCRIPTION("Intel SST Audio for WPT/Broadwell");
299MODULE_LICENSE("GPL v2");
300MODULE_ALIAS("platform:broadwell-audio");