Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
4 * Copyright (c) 2008-2009 Marvell Semiconductor
5 */
6
7#include <linux/delay.h>
8#include <linux/etherdevice.h>
9#include <linux/jiffies.h>
10#include <linux/list.h>
11#include <linux/module.h>
12#include <linux/netdevice.h>
13#include <linux/phy.h>
14#include <net/dsa.h>
15#include "mv88e6060.h"
16
17static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
18{
19 return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
20}
21
22static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
23{
24 return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
25}
26
27static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
28{
29 int ret;
30
31 ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
32 if (ret >= 0) {
33 if (ret == PORT_SWITCH_ID_6060)
34 return "Marvell 88E6060 (A0)";
35 if (ret == PORT_SWITCH_ID_6060_R1 ||
36 ret == PORT_SWITCH_ID_6060_R2)
37 return "Marvell 88E6060 (B0)";
38 if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
39 return "Marvell 88E6060";
40 }
41
42 return NULL;
43}
44
45static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
46 int port,
47 enum dsa_tag_protocol m)
48{
49 return DSA_TAG_PROTO_TRAILER;
50}
51
52static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
53{
54 int i;
55 int ret;
56 unsigned long timeout;
57
58 /* Set all ports to the disabled state. */
59 for (i = 0; i < MV88E6060_PORTS; i++) {
60 ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
61 if (ret < 0)
62 return ret;
63 ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
64 ret & ~PORT_CONTROL_STATE_MASK);
65 if (ret)
66 return ret;
67 }
68
69 /* Wait for transmit queues to drain. */
70 usleep_range(2000, 4000);
71
72 /* Reset the switch. */
73 ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
74 GLOBAL_ATU_CONTROL_SWRESET |
75 GLOBAL_ATU_CONTROL_LEARNDIS);
76 if (ret)
77 return ret;
78
79 /* Wait up to one second for reset to complete. */
80 timeout = jiffies + 1 * HZ;
81 while (time_before(jiffies, timeout)) {
82 ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
83 if (ret < 0)
84 return ret;
85
86 if (ret & GLOBAL_STATUS_INIT_READY)
87 break;
88
89 usleep_range(1000, 2000);
90 }
91 if (time_after(jiffies, timeout))
92 return -ETIMEDOUT;
93
94 return 0;
95}
96
97static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
98{
99 int ret;
100
101 /* Disable discarding of frames with excessive collisions,
102 * set the maximum frame size to 1536 bytes, and mask all
103 * interrupt sources.
104 */
105 ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
106 GLOBAL_CONTROL_MAX_FRAME_1536);
107 if (ret)
108 return ret;
109
110 /* Disable automatic address learning.
111 */
112 return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
113 GLOBAL_ATU_CONTROL_LEARNDIS);
114}
115
116static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
117{
118 int addr = REG_PORT(p);
119 int ret;
120
121 if (dsa_is_unused_port(priv->ds, p))
122 return 0;
123
124 /* Do not force flow control, disable Ingress and Egress
125 * Header tagging, disable VLAN tunneling, and set the port
126 * state to Forwarding. Additionally, if this is the CPU
127 * port, enable Ingress and Egress Trailer tagging mode.
128 */
129 ret = reg_write(priv, addr, PORT_CONTROL,
130 dsa_is_cpu_port(priv->ds, p) ?
131 PORT_CONTROL_TRAILER |
132 PORT_CONTROL_INGRESS_MODE |
133 PORT_CONTROL_STATE_FORWARDING :
134 PORT_CONTROL_STATE_FORWARDING);
135 if (ret)
136 return ret;
137
138 /* Port based VLAN map: give each port its own address
139 * database, allow the CPU port to talk to each of the 'real'
140 * ports, and allow each of the 'real' ports to only talk to
141 * the CPU port.
142 */
143 ret = reg_write(priv, addr, PORT_VLAN_MAP,
144 ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
145 (dsa_is_cpu_port(priv->ds, p) ?
146 dsa_user_ports(priv->ds) :
147 BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
148 if (ret)
149 return ret;
150
151 /* Port Association Vector: when learning source addresses
152 * of packets, add the address to the address database using
153 * a port bitmap that has only the bit for this port set and
154 * the other bits clear.
155 */
156 return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
157}
158
159static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
160{
161 u8 addr[ETH_ALEN];
162 int ret;
163 u16 val;
164
165 eth_random_addr(addr);
166
167 val = addr[0] << 8 | addr[1];
168
169 /* The multicast bit is always transmitted as a zero, so the switch uses
170 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
171 */
172 val &= 0xfeff;
173
174 ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
175 if (ret)
176 return ret;
177
178 ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
179 (addr[2] << 8) | addr[3]);
180 if (ret)
181 return ret;
182
183 return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
184 (addr[4] << 8) | addr[5]);
185}
186
187static int mv88e6060_setup(struct dsa_switch *ds)
188{
189 struct mv88e6060_priv *priv = ds->priv;
190 int ret;
191 int i;
192
193 priv->ds = ds;
194
195 ret = mv88e6060_switch_reset(priv);
196 if (ret < 0)
197 return ret;
198
199 /* @@@ initialise atu */
200
201 ret = mv88e6060_setup_global(priv);
202 if (ret < 0)
203 return ret;
204
205 ret = mv88e6060_setup_addr(priv);
206 if (ret < 0)
207 return ret;
208
209 for (i = 0; i < MV88E6060_PORTS; i++) {
210 ret = mv88e6060_setup_port(priv, i);
211 if (ret < 0)
212 return ret;
213 }
214
215 return 0;
216}
217
218static int mv88e6060_port_to_phy_addr(int port)
219{
220 if (port >= 0 && port < MV88E6060_PORTS)
221 return port;
222 return -1;
223}
224
225static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
226{
227 struct mv88e6060_priv *priv = ds->priv;
228 int addr;
229
230 addr = mv88e6060_port_to_phy_addr(port);
231 if (addr == -1)
232 return 0xffff;
233
234 return reg_read(priv, addr, regnum);
235}
236
237static int
238mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
239{
240 struct mv88e6060_priv *priv = ds->priv;
241 int addr;
242
243 addr = mv88e6060_port_to_phy_addr(port);
244 if (addr == -1)
245 return 0xffff;
246
247 return reg_write(priv, addr, regnum, val);
248}
249
250static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port,
251 struct phylink_config *config)
252{
253 unsigned long *interfaces = config->supported_interfaces;
254 struct mv88e6060_priv *priv = ds->priv;
255 int addr = REG_PORT(port);
256 int ret;
257
258 ret = reg_read(priv, addr, PORT_STATUS);
259 if (ret < 0) {
260 dev_err(ds->dev,
261 "port %d: unable to read status register: %pe\n",
262 port, ERR_PTR(ret));
263 return;
264 }
265
266 /* If the port is configured in SNI mode (acts as a 10Mbps PHY),
267 * it should have phy-mode = "sni", but that doesn't yet exist, so
268 * forcibly fail validation until the need arises to introduce it.
269 */
270 if (!(ret & PORT_STATUS_PORTMODE)) {
271 dev_warn(ds->dev, "port %d: SNI mode not supported\n", port);
272 return;
273 }
274
275 config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE;
276
277 if (port >= 4) {
278 /* Ports 4 and 5 can support MII, REVMII and REVRMII modes */
279 __set_bit(PHY_INTERFACE_MODE_MII, interfaces);
280 __set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
281 __set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces);
282 }
283 if (port <= 4) {
284 /* Ports 0 to 3 have internal PHYs, and port 4 can optionally
285 * use an internal PHY.
286 */
287 /* Internal PHY */
288 __set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
289 /* Default phylib interface mode */
290 __set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
291 }
292}
293
294static const struct dsa_switch_ops mv88e6060_switch_ops = {
295 .get_tag_protocol = mv88e6060_get_tag_protocol,
296 .setup = mv88e6060_setup,
297 .phy_read = mv88e6060_phy_read,
298 .phy_write = mv88e6060_phy_write,
299 .phylink_get_caps = mv88e6060_phylink_get_caps,
300};
301
302static int mv88e6060_probe(struct mdio_device *mdiodev)
303{
304 struct device *dev = &mdiodev->dev;
305 struct mv88e6060_priv *priv;
306 struct dsa_switch *ds;
307 const char *name;
308
309 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
310 if (!priv)
311 return -ENOMEM;
312
313 priv->bus = mdiodev->bus;
314 priv->sw_addr = mdiodev->addr;
315
316 name = mv88e6060_get_name(priv->bus, priv->sw_addr);
317 if (!name)
318 return -ENODEV;
319
320 dev_info(dev, "switch %s detected\n", name);
321
322 ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
323 if (!ds)
324 return -ENOMEM;
325
326 ds->dev = dev;
327 ds->num_ports = MV88E6060_PORTS;
328 ds->priv = priv;
329 ds->dev = dev;
330 ds->ops = &mv88e6060_switch_ops;
331
332 dev_set_drvdata(dev, ds);
333
334 return dsa_register_switch(ds);
335}
336
337static void mv88e6060_remove(struct mdio_device *mdiodev)
338{
339 struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
340
341 if (!ds)
342 return;
343
344 dsa_unregister_switch(ds);
345}
346
347static void mv88e6060_shutdown(struct mdio_device *mdiodev)
348{
349 struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
350
351 if (!ds)
352 return;
353
354 dsa_switch_shutdown(ds);
355
356 dev_set_drvdata(&mdiodev->dev, NULL);
357}
358
359static const struct of_device_id mv88e6060_of_match[] = {
360 {
361 .compatible = "marvell,mv88e6060",
362 },
363 { /* sentinel */ },
364};
365
366static struct mdio_driver mv88e6060_driver = {
367 .probe = mv88e6060_probe,
368 .remove = mv88e6060_remove,
369 .shutdown = mv88e6060_shutdown,
370 .mdiodrv.driver = {
371 .name = "mv88e6060",
372 .of_match_table = mv88e6060_of_match,
373 },
374};
375
376mdio_module_driver(mv88e6060_driver);
377
378MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
379MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
380MODULE_LICENSE("GPL");
381MODULE_ALIAS("platform:mv88e6060");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
4 * Copyright (c) 2008-2009 Marvell Semiconductor
5 */
6
7#include <linux/delay.h>
8#include <linux/etherdevice.h>
9#include <linux/jiffies.h>
10#include <linux/list.h>
11#include <linux/module.h>
12#include <linux/netdevice.h>
13#include <linux/phy.h>
14#include <net/dsa.h>
15#include "mv88e6060.h"
16
17static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
18{
19 return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
20}
21
22static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
23{
24 return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
25}
26
27static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
28{
29 int ret;
30
31 ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
32 if (ret >= 0) {
33 if (ret == PORT_SWITCH_ID_6060)
34 return "Marvell 88E6060 (A0)";
35 if (ret == PORT_SWITCH_ID_6060_R1 ||
36 ret == PORT_SWITCH_ID_6060_R2)
37 return "Marvell 88E6060 (B0)";
38 if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
39 return "Marvell 88E6060";
40 }
41
42 return NULL;
43}
44
45static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
46 int port)
47{
48 return DSA_TAG_PROTO_TRAILER;
49}
50
51static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
52{
53 int i;
54 int ret;
55 unsigned long timeout;
56
57 /* Set all ports to the disabled state. */
58 for (i = 0; i < MV88E6060_PORTS; i++) {
59 ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
60 if (ret < 0)
61 return ret;
62 ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
63 ret & ~PORT_CONTROL_STATE_MASK);
64 if (ret)
65 return ret;
66 }
67
68 /* Wait for transmit queues to drain. */
69 usleep_range(2000, 4000);
70
71 /* Reset the switch. */
72 ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
73 GLOBAL_ATU_CONTROL_SWRESET |
74 GLOBAL_ATU_CONTROL_LEARNDIS);
75 if (ret)
76 return ret;
77
78 /* Wait up to one second for reset to complete. */
79 timeout = jiffies + 1 * HZ;
80 while (time_before(jiffies, timeout)) {
81 ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
82 if (ret < 0)
83 return ret;
84
85 if (ret & GLOBAL_STATUS_INIT_READY)
86 break;
87
88 usleep_range(1000, 2000);
89 }
90 if (time_after(jiffies, timeout))
91 return -ETIMEDOUT;
92
93 return 0;
94}
95
96static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
97{
98 int ret;
99
100 /* Disable discarding of frames with excessive collisions,
101 * set the maximum frame size to 1536 bytes, and mask all
102 * interrupt sources.
103 */
104 ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
105 GLOBAL_CONTROL_MAX_FRAME_1536);
106 if (ret)
107 return ret;
108
109 /* Disable automatic address learning.
110 */
111 return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
112 GLOBAL_ATU_CONTROL_LEARNDIS);
113}
114
115static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
116{
117 int addr = REG_PORT(p);
118 int ret;
119
120 /* Do not force flow control, disable Ingress and Egress
121 * Header tagging, disable VLAN tunneling, and set the port
122 * state to Forwarding. Additionally, if this is the CPU
123 * port, enable Ingress and Egress Trailer tagging mode.
124 */
125 ret = reg_write(priv, addr, PORT_CONTROL,
126 dsa_is_cpu_port(priv->ds, p) ?
127 PORT_CONTROL_TRAILER |
128 PORT_CONTROL_INGRESS_MODE |
129 PORT_CONTROL_STATE_FORWARDING :
130 PORT_CONTROL_STATE_FORWARDING);
131 if (ret)
132 return ret;
133
134 /* Port based VLAN map: give each port its own address
135 * database, allow the CPU port to talk to each of the 'real'
136 * ports, and allow each of the 'real' ports to only talk to
137 * the CPU port.
138 */
139 ret = reg_write(priv, addr, PORT_VLAN_MAP,
140 ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
141 (dsa_is_cpu_port(priv->ds, p) ?
142 dsa_user_ports(priv->ds) :
143 BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
144 if (ret)
145 return ret;
146
147 /* Port Association Vector: when learning source addresses
148 * of packets, add the address to the address database using
149 * a port bitmap that has only the bit for this port set and
150 * the other bits clear.
151 */
152 return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
153}
154
155static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
156{
157 u8 addr[ETH_ALEN];
158 int ret;
159 u16 val;
160
161 eth_random_addr(addr);
162
163 val = addr[0] << 8 | addr[1];
164
165 /* The multicast bit is always transmitted as a zero, so the switch uses
166 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
167 */
168 val &= 0xfeff;
169
170 ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
171 if (ret)
172 return ret;
173
174 ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
175 (addr[2] << 8) | addr[3]);
176 if (ret)
177 return ret;
178
179 return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
180 (addr[4] << 8) | addr[5]);
181}
182
183static int mv88e6060_setup(struct dsa_switch *ds)
184{
185 struct mv88e6060_priv *priv = ds->priv;
186 int ret;
187 int i;
188
189 priv->ds = ds;
190
191 ret = mv88e6060_switch_reset(priv);
192 if (ret < 0)
193 return ret;
194
195 /* @@@ initialise atu */
196
197 ret = mv88e6060_setup_global(priv);
198 if (ret < 0)
199 return ret;
200
201 ret = mv88e6060_setup_addr(priv);
202 if (ret < 0)
203 return ret;
204
205 for (i = 0; i < MV88E6060_PORTS; i++) {
206 ret = mv88e6060_setup_port(priv, i);
207 if (ret < 0)
208 return ret;
209 }
210
211 return 0;
212}
213
214static int mv88e6060_port_to_phy_addr(int port)
215{
216 if (port >= 0 && port < MV88E6060_PORTS)
217 return port;
218 return -1;
219}
220
221static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
222{
223 struct mv88e6060_priv *priv = ds->priv;
224 int addr;
225
226 addr = mv88e6060_port_to_phy_addr(port);
227 if (addr == -1)
228 return 0xffff;
229
230 return reg_read(priv, addr, regnum);
231}
232
233static int
234mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
235{
236 struct mv88e6060_priv *priv = ds->priv;
237 int addr;
238
239 addr = mv88e6060_port_to_phy_addr(port);
240 if (addr == -1)
241 return 0xffff;
242
243 return reg_write(priv, addr, regnum, val);
244}
245
246static const struct dsa_switch_ops mv88e6060_switch_ops = {
247 .get_tag_protocol = mv88e6060_get_tag_protocol,
248 .setup = mv88e6060_setup,
249 .phy_read = mv88e6060_phy_read,
250 .phy_write = mv88e6060_phy_write,
251};
252
253static int mv88e6060_probe(struct mdio_device *mdiodev)
254{
255 struct device *dev = &mdiodev->dev;
256 struct mv88e6060_priv *priv;
257 struct dsa_switch *ds;
258 const char *name;
259
260 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
261 if (!priv)
262 return -ENOMEM;
263
264 priv->bus = mdiodev->bus;
265 priv->sw_addr = mdiodev->addr;
266
267 name = mv88e6060_get_name(priv->bus, priv->sw_addr);
268 if (!name)
269 return -ENODEV;
270
271 dev_info(dev, "switch %s detected\n", name);
272
273 ds = dsa_switch_alloc(dev, MV88E6060_PORTS);
274 if (!ds)
275 return -ENOMEM;
276
277 ds->priv = priv;
278 ds->dev = dev;
279 ds->ops = &mv88e6060_switch_ops;
280
281 dev_set_drvdata(dev, ds);
282
283 return dsa_register_switch(ds);
284}
285
286static void mv88e6060_remove(struct mdio_device *mdiodev)
287{
288 struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
289
290 dsa_unregister_switch(ds);
291}
292
293static const struct of_device_id mv88e6060_of_match[] = {
294 {
295 .compatible = "marvell,mv88e6060",
296 },
297 { /* sentinel */ },
298};
299
300static struct mdio_driver mv88e6060_driver = {
301 .probe = mv88e6060_probe,
302 .remove = mv88e6060_remove,
303 .mdiodrv.driver = {
304 .name = "mv88e6060",
305 .of_match_table = mv88e6060_of_match,
306 },
307};
308
309mdio_module_driver(mv88e6060_driver);
310
311MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
312MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
313MODULE_LICENSE("GPL");
314MODULE_ALIAS("platform:mv88e6060");