1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Device driver for the PMU in Apple PowerBooks and PowerMacs.
   4 *
   5 * The VIA (versatile interface adapter) interfaces to the PMU,
   6 * a 6805 microprocessor core whose primary function is to control
   7 * battery charging and system power on the PowerBook 3400 and 2400.
   8 * The PMU also controls the ADB (Apple Desktop Bus) which connects
   9 * to the keyboard and mouse, as well as the non-volatile RAM
  10 * and the RTC (real time clock) chip.
  11 *
  12 * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
  13 * Copyright (C) 2001-2002 Benjamin Herrenschmidt
  14 * Copyright (C) 2006-2007 Johannes Berg
  15 *
  16 * THIS DRIVER IS BECOMING A TOTAL MESS !
  17 *  - Cleanup atomically disabling reply to PMU events after
  18 *    a sleep or a freq. switch
  19 *
  20 */
  21#include <linux/stdarg.h>
  22#include <linux/mutex.h>
  23#include <linux/types.h>
  24#include <linux/errno.h>
  25#include <linux/kernel.h>
  26#include <linux/delay.h>
  27#include <linux/sched/signal.h>
  28#include <linux/miscdevice.h>
  29#include <linux/blkdev.h>
  30#include <linux/pci.h>
  31#include <linux/slab.h>
  32#include <linux/poll.h>
  33#include <linux/adb.h>
  34#include <linux/pmu.h>
  35#include <linux/cuda.h>
  36#include <linux/module.h>
  37#include <linux/spinlock.h>
  38#include <linux/pm.h>
  39#include <linux/proc_fs.h>
  40#include <linux/seq_file.h>
  41#include <linux/init.h>
  42#include <linux/interrupt.h>
  43#include <linux/device.h>
  44#include <linux/syscore_ops.h>
  45#include <linux/freezer.h>
  46#include <linux/syscalls.h>
  47#include <linux/suspend.h>
  48#include <linux/cpu.h>
  49#include <linux/compat.h>
  50#include <linux/of_address.h>
  51#include <linux/of_irq.h>
  52#include <linux/uaccess.h>
  53#include <linux/pgtable.h>
  54#include <asm/machdep.h>
  55#include <asm/io.h>
 
  56#include <asm/sections.h>
  57#include <asm/irq.h>
  58#ifdef CONFIG_PPC_PMAC
  59#include <asm/pmac_feature.h>
  60#include <asm/pmac_pfunc.h>
  61#include <asm/pmac_low_i2c.h>
 
  62#include <asm/mmu_context.h>
  63#include <asm/cputable.h>
  64#include <asm/time.h>
  65#include <asm/backlight.h>
  66#else
  67#include <asm/macintosh.h>
  68#include <asm/macints.h>
  69#include <asm/mac_via.h>
  70#endif
  71
  72#include "via-pmu-event.h"
  73
  74/* Some compile options */
  75#undef DEBUG_SLEEP
  76
 
 
 
  77/* How many iterations between battery polls */
  78#define BATTERY_POLLING_COUNT	2
  79
  80static DEFINE_MUTEX(pmu_info_proc_mutex);
  81
  82/* VIA registers - spaced 0x200 bytes apart */
  83#define RS		0x200		/* skip between registers */
  84#define B		0		/* B-side data */
  85#define A		RS		/* A-side data */
  86#define DIRB		(2*RS)		/* B-side direction (1=output) */
  87#define DIRA		(3*RS)		/* A-side direction (1=output) */
  88#define T1CL		(4*RS)		/* Timer 1 ctr/latch (low 8 bits) */
  89#define T1CH		(5*RS)		/* Timer 1 counter (high 8 bits) */
  90#define T1LL		(6*RS)		/* Timer 1 latch (low 8 bits) */
  91#define T1LH		(7*RS)		/* Timer 1 latch (high 8 bits) */
  92#define T2CL		(8*RS)		/* Timer 2 ctr/latch (low 8 bits) */
  93#define T2CH		(9*RS)		/* Timer 2 counter (high 8 bits) */
  94#define SR		(10*RS)		/* Shift register */
  95#define ACR		(11*RS)		/* Auxiliary control register */
  96#define PCR		(12*RS)		/* Peripheral control register */
  97#define IFR		(13*RS)		/* Interrupt flag register */
  98#define IER		(14*RS)		/* Interrupt enable register */
  99#define ANH		(15*RS)		/* A-side data, no handshake */
 100
 101/* Bits in B data register: both active low */
 102#ifdef CONFIG_PPC_PMAC
 103#define TACK		0x08		/* Transfer acknowledge (input) */
 104#define TREQ		0x10		/* Transfer request (output) */
 105#else
 106#define TACK		0x02
 107#define TREQ		0x04
 108#endif
 109
 110/* Bits in ACR */
 111#define SR_CTRL		0x1c		/* Shift register control bits */
 112#define SR_EXT		0x0c		/* Shift on external clock */
 113#define SR_OUT		0x10		/* Shift out if 1 */
 114
 115/* Bits in IFR and IER */
 116#define IER_SET		0x80		/* set bits in IER */
 117#define IER_CLR		0		/* clear bits in IER */
 118#define SR_INT		0x04		/* Shift register full/empty */
 119#define CB2_INT		0x08
 120#define CB1_INT		0x10		/* transition on CB1 input */
 121
 122static volatile enum pmu_state {
 123	uninitialized = 0,
 124	idle,
 125	sending,
 126	intack,
 127	reading,
 128	reading_intr,
 129	locked,
 130} pmu_state;
 131
 132static volatile enum int_data_state {
 133	int_data_empty,
 134	int_data_fill,
 135	int_data_ready,
 136	int_data_flush
 137} int_data_state[2] = { int_data_empty, int_data_empty };
 138
 139static struct adb_request *current_req;
 140static struct adb_request *last_req;
 141static struct adb_request *req_awaiting_reply;
 142static unsigned char interrupt_data[2][32];
 143static int interrupt_data_len[2];
 144static int int_data_last;
 145static unsigned char *reply_ptr;
 146static int data_index;
 147static int data_len;
 148static volatile int adb_int_pending;
 149static volatile int disable_poll;
 150static int pmu_kind = PMU_UNKNOWN;
 151static int pmu_fully_inited;
 152static int pmu_has_adb;
 153#ifdef CONFIG_PPC_PMAC
 154static volatile unsigned char __iomem *via1;
 155static volatile unsigned char __iomem *via2;
 156static struct device_node *vias;
 157static struct device_node *gpio_node;
 158#endif
 159static unsigned char __iomem *gpio_reg;
 160static int gpio_irq = 0;
 161static int gpio_irq_enabled = -1;
 162static volatile int pmu_suspended;
 163static DEFINE_SPINLOCK(pmu_lock);
 164static u8 pmu_intr_mask;
 165static int pmu_version;
 166static int drop_interrupts;
 167#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 168static int option_lid_wakeup = 1;
 169#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 170static unsigned long async_req_locks;
 171
 172#define NUM_IRQ_STATS 13
 173static unsigned int pmu_irq_stats[NUM_IRQ_STATS];
 174
 175static struct proc_dir_entry *proc_pmu_root;
 176static struct proc_dir_entry *proc_pmu_info;
 177static struct proc_dir_entry *proc_pmu_irqstats;
 178static struct proc_dir_entry *proc_pmu_options;
 179static int option_server_mode;
 180
 181int pmu_battery_count;
 182static int pmu_cur_battery;
 183unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT;
 184struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
 185static int query_batt_timer = BATTERY_POLLING_COUNT;
 186static struct adb_request batt_req;
 187static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];
 188
 
 189int asleep;
 190
 191#ifdef CONFIG_ADB
 192static int adb_dev_map;
 193static int pmu_adb_flags;
 194
 195static int pmu_probe(void);
 196static int pmu_init(void);
 197static int pmu_send_request(struct adb_request *req, int sync);
 198static int pmu_adb_autopoll(int devs);
 199static int pmu_adb_reset_bus(void);
 200#endif /* CONFIG_ADB */
 201
 202static int init_pmu(void);
 203static void pmu_start(void);
 204static irqreturn_t via_pmu_interrupt(int irq, void *arg);
 205static irqreturn_t gpio1_interrupt(int irq, void *arg);
 206#ifdef CONFIG_PROC_FS
 207static int pmu_info_proc_show(struct seq_file *m, void *v);
 208static int pmu_irqstats_proc_show(struct seq_file *m, void *v);
 209static int pmu_battery_proc_show(struct seq_file *m, void *v);
 210#endif
 211static void pmu_pass_intr(unsigned char *data, int len);
 212static const struct proc_ops pmu_options_proc_ops;
 213
 214#ifdef CONFIG_ADB
 215const struct adb_driver via_pmu_driver = {
 216	.name         = "PMU",
 217	.probe        = pmu_probe,
 218	.init         = pmu_init,
 219	.send_request = pmu_send_request,
 220	.autopoll     = pmu_adb_autopoll,
 221	.poll         = pmu_poll_adb,
 222	.reset_bus    = pmu_adb_reset_bus,
 223};
 224#endif /* CONFIG_ADB */
 225
 226extern void low_sleep_handler(void);
 227extern void enable_kernel_altivec(void);
 228extern void enable_kernel_fp(void);
 229
 230#ifdef DEBUG_SLEEP
 231int pmu_polled_request(struct adb_request *req);
 232void pmu_blink(int n);
 233#endif
 234
 235/*
 236 * This table indicates for each PMU opcode:
 237 * - the number of data bytes to be sent with the command, or -1
 238 *   if a length byte should be sent,
 239 * - the number of response bytes which the PMU will return, or
 240 *   -1 if it will send a length byte.
 241 */
 242static const s8 pmu_data_len[256][2] = {
 243/*	   0	   1	   2	   3	   4	   5	   6	   7  */
 244/*00*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 245/*08*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 246/*10*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 247/*18*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
 248/*20*/	{-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
 249/*28*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
 250/*30*/	{ 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 251/*38*/	{ 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
 252/*40*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 253/*48*/	{ 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
 254/*50*/	{ 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
 255/*58*/	{ 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
 256/*60*/	{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 257/*68*/	{ 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
 258/*70*/	{ 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 259/*78*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
 260/*80*/	{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 261/*88*/	{ 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 262/*90*/	{ 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 263/*98*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 264/*a0*/	{ 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
 265/*a8*/	{ 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 266/*b0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 267/*b8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 268/*c0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 269/*c8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 270/*d0*/	{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 271/*d8*/	{ 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
 272/*e0*/	{-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
 273/*e8*/	{ 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
 274/*f0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 275/*f8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 276};
 277
 278static char *pbook_type[] = {
 279	"Unknown PowerBook",
 280	"PowerBook 2400/3400/3500(G3)",
 281	"PowerBook G3 Series",
 282	"1999 PowerBook G3",
 283	"Core99"
 284};
 285
 286int __init find_via_pmu(void)
 287{
 288#ifdef CONFIG_PPC_PMAC
 289	int err;
 290	u64 taddr;
 291	struct resource res;
 292
 293	if (pmu_state != uninitialized)
 294		return 1;
 295	vias = of_find_node_by_name(NULL, "via-pmu");
 296	if (vias == NULL)
 297		return 0;
 298
 299	err = of_address_to_resource(vias, 0, &res);
 300	if (err) {
 301		printk(KERN_ERR "via-pmu: Error getting \"reg\" property !\n");
 
 
 
 
 
 302		goto fail;
 303	}
 304	taddr = res.start;
 
 305
 306	pmu_has_adb = 1;
 307
 308	pmu_intr_mask =	PMU_INT_PCEJECT |
 309			PMU_INT_SNDBRT |
 310			PMU_INT_ADB |
 311			PMU_INT_TICK;
 312	
 313	if (of_node_name_eq(vias->parent, "ohare") ||
 314	    of_device_is_compatible(vias->parent, "ohare"))
 315		pmu_kind = PMU_OHARE_BASED;
 316	else if (of_device_is_compatible(vias->parent, "paddington"))
 317		pmu_kind = PMU_PADDINGTON_BASED;
 318	else if (of_device_is_compatible(vias->parent, "heathrow"))
 319		pmu_kind = PMU_HEATHROW_BASED;
 320	else if (of_device_is_compatible(vias->parent, "Keylargo")
 321		 || of_device_is_compatible(vias->parent, "K2-Keylargo")) {
 322		struct device_node *gpiop;
 323		struct device_node *adbp;
 
 324
 325		pmu_kind = PMU_KEYLARGO_BASED;
 326		adbp = of_find_node_by_type(NULL, "adb");
 327		pmu_has_adb = (adbp != NULL);
 328		of_node_put(adbp);
 329		pmu_intr_mask =	PMU_INT_PCEJECT |
 330				PMU_INT_SNDBRT |
 331				PMU_INT_ADB |
 332				PMU_INT_TICK |
 333				PMU_INT_ENVIRONMENT;
 334		
 335		gpiop = of_find_node_by_name(NULL, "gpio");
 336		if (gpiop) {
 337			if (!of_address_to_resource(gpiop, 0, &res))
 338				gpio_reg = ioremap(res.start, 0x10);
 
 
 
 339			of_node_put(gpiop);
 340		}
 341		if (gpio_reg == NULL) {
 342			printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
 343			goto fail;
 344		}
 345	} else
 346		pmu_kind = PMU_UNKNOWN;
 347
 348	via1 = via2 = ioremap(taddr, 0x2000);
 349	if (via1 == NULL) {
 350		printk(KERN_ERR "via-pmu: Can't map address !\n");
 351		goto fail_via_remap;
 352	}
 353	
 354	out_8(&via1[IER], IER_CLR | 0x7f);	/* disable all intrs */
 355	out_8(&via1[IFR], 0x7f);			/* clear IFR */
 356
 357	pmu_state = idle;
 358
 359	if (!init_pmu())
 360		goto fail_init;
 361
 362	sys_ctrler = SYS_CTRLER_PMU;
 363	
 364	return 1;
 365
 366 fail_init:
 367	iounmap(via1);
 368	via1 = via2 = NULL;
 369 fail_via_remap:
 370	iounmap(gpio_reg);
 371	gpio_reg = NULL;
 372 fail:
 373	of_node_put(vias);
 374	vias = NULL;
 375	pmu_state = uninitialized;
 376	return 0;
 377#else
 378	if (macintosh_config->adb_type != MAC_ADB_PB2)
 379		return 0;
 380
 381	pmu_kind = PMU_UNKNOWN;
 382
 
 
 383	pmu_has_adb = 1;
 384
 385	pmu_intr_mask =	PMU_INT_PCEJECT |
 386			PMU_INT_SNDBRT |
 387			PMU_INT_ADB |
 388			PMU_INT_TICK;
 389
 390	pmu_state = idle;
 391
 392	if (!init_pmu()) {
 393		pmu_state = uninitialized;
 394		return 0;
 395	}
 396
 397	return 1;
 398#endif /* !CONFIG_PPC_PMAC */
 399}
 400
 401#ifdef CONFIG_ADB
 402static int pmu_probe(void)
 403{
 404	return pmu_state == uninitialized ? -ENODEV : 0;
 405}
 406
 407static int pmu_init(void)
 408{
 409	return pmu_state == uninitialized ? -ENODEV : 0;
 410}
 411#endif /* CONFIG_ADB */
 412
 413/*
 414 * We can't wait until pmu_init gets called, that happens too late.
 415 * It happens after IDE and SCSI initialization, which can take a few
 416 * seconds, and by that time the PMU could have given up on us and
 417 * turned us off.
 418 * Thus this is called with arch_initcall rather than device_initcall.
 419 */
 420static int __init via_pmu_start(void)
 421{
 422	unsigned int __maybe_unused irq;
 423
 424	if (pmu_state == uninitialized)
 425		return -ENODEV;
 426
 427	batt_req.complete = 1;
 428
 429#ifdef CONFIG_PPC_PMAC
 430	irq = irq_of_parse_and_map(vias, 0);
 431	if (!irq) {
 432		printk(KERN_ERR "via-pmu: can't map interrupt\n");
 433		return -ENODEV;
 434	}
 435	/* We set IRQF_NO_SUSPEND because we don't want the interrupt
 436	 * to be disabled between the 2 passes of driver suspend, we
 437	 * control our own disabling for that one
 438	 */
 439	if (request_irq(irq, via_pmu_interrupt, IRQF_NO_SUSPEND,
 440			"VIA-PMU", (void *)0)) {
 441		printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
 442		return -ENODEV;
 443	}
 444
 445	if (pmu_kind == PMU_KEYLARGO_BASED) {
 446		gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
 447		if (gpio_node == NULL)
 448			gpio_node = of_find_node_by_name(NULL,
 449							 "pmu-interrupt");
 450		if (gpio_node)
 451			gpio_irq = irq_of_parse_and_map(gpio_node, 0);
 452
 453		if (gpio_irq) {
 454			if (request_irq(gpio_irq, gpio1_interrupt,
 455					IRQF_NO_SUSPEND, "GPIO1 ADB",
 456					(void *)0))
 457				printk(KERN_ERR "pmu: can't get irq %d"
 458				       " (GPIO1)\n", gpio_irq);
 459			else
 460				gpio_irq_enabled = 1;
 461		}
 462	}
 463
 464	/* Enable interrupts */
 465	out_8(&via1[IER], IER_SET | SR_INT | CB1_INT);
 466#else
 467	if (request_irq(IRQ_MAC_ADB_SR, via_pmu_interrupt, IRQF_NO_SUSPEND,
 468			"VIA-PMU-SR", NULL)) {
 469		pr_err("%s: couldn't get SR irq\n", __func__);
 470		return -ENODEV;
 471	}
 472	if (request_irq(IRQ_MAC_ADB_CL, via_pmu_interrupt, IRQF_NO_SUSPEND,
 473			"VIA-PMU-CL", NULL)) {
 474		pr_err("%s: couldn't get CL irq\n", __func__);
 475		free_irq(IRQ_MAC_ADB_SR, NULL);
 476		return -ENODEV;
 477	}
 478#endif /* !CONFIG_PPC_PMAC */
 479
 480	pmu_fully_inited = 1;
 481
 482	/* Make sure PMU settle down before continuing. This is _very_ important
 483	 * since the IDE probe may shut interrupts down for quite a bit of time. If
 484	 * a PMU communication is pending while this happens, the PMU may timeout
 485	 * Not that on Core99 machines, the PMU keeps sending us environement
 486	 * messages, we should find a way to either fix IDE or make it call
 487	 * pmu_suspend() before masking interrupts. This can also happens while
 488	 * scolling with some fbdevs.
 489	 */
 490	do {
 491		pmu_poll();
 492	} while (pmu_state != idle);
 493
 494	return 0;
 495}
 496
 497arch_initcall(via_pmu_start);
 498
 499/*
 500 * This has to be done after pci_init, which is a subsys_initcall.
 501 */
 502static int __init via_pmu_dev_init(void)
 503{
 504	if (pmu_state == uninitialized)
 505		return -ENODEV;
 506
 507#ifdef CONFIG_PMAC_BACKLIGHT
 508	/* Initialize backlight */
 509	pmu_backlight_init();
 510#endif
 511
 512#ifdef CONFIG_PPC32
 513  	if (of_machine_is_compatible("AAPL,3400/2400") ||
 514  		of_machine_is_compatible("AAPL,3500")) {
 515		int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 516			NULL, PMAC_MB_INFO_MODEL, 0);
 517		pmu_battery_count = 1;
 518		if (mb == PMAC_TYPE_COMET)
 519			pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
 520		else
 521			pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
 522	} else if (of_machine_is_compatible("AAPL,PowerBook1998") ||
 523		of_machine_is_compatible("PowerBook1,1")) {
 524		pmu_battery_count = 2;
 525		pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
 526		pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
 527	} else {
 528		struct device_node* prim =
 529			of_find_node_by_name(NULL, "power-mgt");
 530		const u32 *prim_info = NULL;
 531		if (prim)
 532			prim_info = of_get_property(prim, "prim-info", NULL);
 533		if (prim_info) {
 534			/* Other stuffs here yet unknown */
 535			pmu_battery_count = (prim_info[6] >> 16) & 0xff;
 536			pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
 537			if (pmu_battery_count > 1)
 538				pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
 539		}
 540		of_node_put(prim);
 541	}
 542#endif /* CONFIG_PPC32 */
 543
 544	/* Create /proc/pmu */
 545	proc_pmu_root = proc_mkdir("pmu", NULL);
 546	if (proc_pmu_root) {
 547		long i;
 548
 549		for (i=0; i<pmu_battery_count; i++) {
 550			char title[16];
 551			sprintf(title, "battery_%ld", i);
 552			proc_pmu_batt[i] = proc_create_single_data(title, 0,
 553					proc_pmu_root, pmu_battery_proc_show,
 554					(void *)i);
 555		}
 556
 557		proc_pmu_info = proc_create_single("info", 0, proc_pmu_root,
 558				pmu_info_proc_show);
 559		proc_pmu_irqstats = proc_create_single("interrupts", 0,
 560				proc_pmu_root, pmu_irqstats_proc_show);
 561		proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
 562						&pmu_options_proc_ops);
 563	}
 564	return 0;
 565}
 566
 567device_initcall(via_pmu_dev_init);
 568
 569static int
 570init_pmu(void)
 571{
 572	int timeout;
 573	struct adb_request req;
 574
 575	/* Negate TREQ. Set TACK to input and TREQ to output. */
 576	out_8(&via2[B], in_8(&via2[B]) | TREQ);
 577	out_8(&via2[DIRB], (in_8(&via2[DIRB]) | TREQ) & ~TACK);
 578
 579	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
 580	timeout =  100000;
 581	while (!req.complete) {
 582		if (--timeout < 0) {
 583			printk(KERN_ERR "init_pmu: no response from PMU\n");
 584			return 0;
 585		}
 586		udelay(10);
 587		pmu_poll();
 588	}
 589
 590	/* ack all pending interrupts */
 591	timeout = 100000;
 592	interrupt_data[0][0] = 1;
 593	while (interrupt_data[0][0] || pmu_state != idle) {
 594		if (--timeout < 0) {
 595			printk(KERN_ERR "init_pmu: timed out acking intrs\n");
 596			return 0;
 597		}
 598		if (pmu_state == idle)
 599			adb_int_pending = 1;
 600		via_pmu_interrupt(0, NULL);
 601		udelay(10);
 602	}
 603
 604	/* Tell PMU we are ready.  */
 605	if (pmu_kind == PMU_KEYLARGO_BASED) {
 606		pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
 607		while (!req.complete)
 608			pmu_poll();
 609	}
 610
 611	/* Read PMU version */
 612	pmu_request(&req, NULL, 1, PMU_GET_VERSION);
 613	pmu_wait_complete(&req);
 614	if (req.reply_len > 0)
 615		pmu_version = req.reply[0];
 616	
 617	/* Read server mode setting */
 618	if (pmu_kind == PMU_KEYLARGO_BASED) {
 619		pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
 620			    PMU_PWR_GET_POWERUP_EVENTS);
 621		pmu_wait_complete(&req);
 622		if (req.reply_len == 2) {
 623			if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT)
 624				option_server_mode = 1;
 625			printk(KERN_INFO "via-pmu: Server Mode is %s\n",
 626			       option_server_mode ? "enabled" : "disabled");
 627		}
 628	}
 629
 630	printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
 631	       PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
 632
 633	return 1;
 634}
 635
 636int
 637pmu_get_model(void)
 638{
 639	return pmu_kind;
 640}
 641
 642static void pmu_set_server_mode(int server_mode)
 643{
 644	struct adb_request req;
 645
 646	if (pmu_kind != PMU_KEYLARGO_BASED)
 647		return;
 648
 649	option_server_mode = server_mode;
 650	pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS);
 651	pmu_wait_complete(&req);
 652	if (req.reply_len < 2)
 653		return;
 654	if (server_mode)
 655		pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
 656			    PMU_PWR_SET_POWERUP_EVENTS,
 657			    req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 
 658	else
 659		pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
 660			    PMU_PWR_CLR_POWERUP_EVENTS,
 661			    req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 
 662	pmu_wait_complete(&req);
 663}
 664
 665/* This new version of the code for 2400/3400/3500 powerbooks
 666 * is inspired from the implementation in gkrellm-pmu
 667 */
 668static void
 669done_battery_state_ohare(struct adb_request* req)
 670{
 671#ifdef CONFIG_PPC_PMAC
 672	/* format:
 673	 *  [0]    :  flags
 674	 *    0x01 :  AC indicator
 675	 *    0x02 :  charging
 676	 *    0x04 :  battery exist
 677	 *    0x08 :  
 678	 *    0x10 :  
 679	 *    0x20 :  full charged
 680	 *    0x40 :  pcharge reset
 681	 *    0x80 :  battery exist
 682	 *
 683	 *  [1][2] :  battery voltage
 684	 *  [3]    :  CPU temperature
 685	 *  [4]    :  battery temperature
 686	 *  [5]    :  current
 687	 *  [6][7] :  pcharge
 688	 *              --tkoba
 689	 */
 690	unsigned int bat_flags = PMU_BATT_TYPE_HOOPER;
 691	long pcharge, charge, vb, vmax, lmax;
 692	long vmax_charging, vmax_charged;
 693	long amperage, voltage, time, max;
 694	int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 695			NULL, PMAC_MB_INFO_MODEL, 0);
 696
 697	if (req->reply[0] & 0x01)
 698		pmu_power_flags |= PMU_PWR_AC_PRESENT;
 699	else
 700		pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
 701	
 702	if (mb == PMAC_TYPE_COMET) {
 703		vmax_charged = 189;
 704		vmax_charging = 213;
 705		lmax = 6500;
 706	} else {
 707		vmax_charged = 330;
 708		vmax_charging = 330;
 709		lmax = 6500;
 710	}
 711	vmax = vmax_charged;
 712
 713	/* If battery installed */
 714	if (req->reply[0] & 0x04) {
 715		bat_flags |= PMU_BATT_PRESENT;
 716		if (req->reply[0] & 0x02)
 717			bat_flags |= PMU_BATT_CHARGING;
 718		vb = (req->reply[1] << 8) | req->reply[2];
 719		voltage = (vb * 265 + 72665) / 10;
 720		amperage = req->reply[5];
 721		if ((req->reply[0] & 0x01) == 0) {
 722			if (amperage > 200)
 723				vb += ((amperage - 200) * 15)/100;
 724		} else if (req->reply[0] & 0x02) {
 725			vb = (vb * 97) / 100;
 726			vmax = vmax_charging;
 727		}
 728		charge = (100 * vb) / vmax;
 729		if (req->reply[0] & 0x40) {
 730			pcharge = (req->reply[6] << 8) + req->reply[7];
 731			if (pcharge > lmax)
 732				pcharge = lmax;
 733			pcharge *= 100;
 734			pcharge = 100 - pcharge / lmax;
 735			if (pcharge < charge)
 736				charge = pcharge;
 737		}
 738		if (amperage > 0)
 739			time = (charge * 16440) / amperage;
 740		else
 741			time = 0;
 742		max = 100;
 743		amperage = -amperage;
 744	} else
 745		charge = max = amperage = voltage = time = 0;
 746
 747	pmu_batteries[pmu_cur_battery].flags = bat_flags;
 748	pmu_batteries[pmu_cur_battery].charge = charge;
 749	pmu_batteries[pmu_cur_battery].max_charge = max;
 750	pmu_batteries[pmu_cur_battery].amperage = amperage;
 751	pmu_batteries[pmu_cur_battery].voltage = voltage;
 752	pmu_batteries[pmu_cur_battery].time_remaining = time;
 753#endif /* CONFIG_PPC_PMAC */
 754
 755	clear_bit(0, &async_req_locks);
 756}
 757
 758static void
 759done_battery_state_smart(struct adb_request* req)
 760{
 761	/* format:
 762	 *  [0] : format of this structure (known: 3,4,5)
 763	 *  [1] : flags
 764	 *  
 765	 *  format 3 & 4:
 766	 *  
 767	 *  [2] : charge
 768	 *  [3] : max charge
 769	 *  [4] : current
 770	 *  [5] : voltage
 771	 *  
 772	 *  format 5:
 773	 *  
 774	 *  [2][3] : charge
 775	 *  [4][5] : max charge
 776	 *  [6][7] : current
 777	 *  [8][9] : voltage
 778	 */
 779	 
 780	unsigned int bat_flags = PMU_BATT_TYPE_SMART;
 781	int amperage;
 782	unsigned int capa, max, voltage;
 783	
 784	if (req->reply[1] & 0x01)
 785		pmu_power_flags |= PMU_PWR_AC_PRESENT;
 786	else
 787		pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
 788
 789
 790	capa = max = amperage = voltage = 0;
 791	
 792	if (req->reply[1] & 0x04) {
 793		bat_flags |= PMU_BATT_PRESENT;
 794		switch(req->reply[0]) {
 795			case 3:
 796			case 4: capa = req->reply[2];
 797				max = req->reply[3];
 798				amperage = *((signed char *)&req->reply[4]);
 799				voltage = req->reply[5];
 800				break;
 801			case 5: capa = (req->reply[2] << 8) | req->reply[3];
 802				max = (req->reply[4] << 8) | req->reply[5];
 803				amperage = *((signed short *)&req->reply[6]);
 804				voltage = (req->reply[8] << 8) | req->reply[9];
 805				break;
 806			default:
 807				pr_warn("pmu.c: unrecognized battery info, "
 808					"len: %d, %4ph\n", req->reply_len,
 809							   req->reply);
 810				break;
 811		}
 812	}
 813
 814	if ((req->reply[1] & 0x01) && (amperage > 0))
 815		bat_flags |= PMU_BATT_CHARGING;
 816
 817	pmu_batteries[pmu_cur_battery].flags = bat_flags;
 818	pmu_batteries[pmu_cur_battery].charge = capa;
 819	pmu_batteries[pmu_cur_battery].max_charge = max;
 820	pmu_batteries[pmu_cur_battery].amperage = amperage;
 821	pmu_batteries[pmu_cur_battery].voltage = voltage;
 822	if (amperage) {
 823		if ((req->reply[1] & 0x01) && (amperage > 0))
 824			pmu_batteries[pmu_cur_battery].time_remaining
 825				= ((max-capa) * 3600) / amperage;
 826		else
 827			pmu_batteries[pmu_cur_battery].time_remaining
 828				= (capa * 3600) / (-amperage);
 829	} else
 830		pmu_batteries[pmu_cur_battery].time_remaining = 0;
 831
 832	pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count;
 833
 834	clear_bit(0, &async_req_locks);
 835}
 836
 837static void
 838query_battery_state(void)
 839{
 840	if (test_and_set_bit(0, &async_req_locks))
 841		return;
 842	if (pmu_kind == PMU_OHARE_BASED)
 843		pmu_request(&batt_req, done_battery_state_ohare,
 844			1, PMU_BATTERY_STATE);
 845	else
 846		pmu_request(&batt_req, done_battery_state_smart,
 847			2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
 848}
 849
 850#ifdef CONFIG_PROC_FS
 851static int pmu_info_proc_show(struct seq_file *m, void *v)
 852{
 853	seq_printf(m, "PMU driver version     : %d\n", PMU_DRIVER_VERSION);
 854	seq_printf(m, "PMU firmware version   : %02x\n", pmu_version);
 855	seq_printf(m, "AC Power               : %d\n",
 856		((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
 857	seq_printf(m, "Battery count          : %d\n", pmu_battery_count);
 858
 859	return 0;
 860}
 861
 862static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
 863{
 864	int i;
 865	static const char *irq_names[NUM_IRQ_STATS] = {
 866		"Unknown interrupt (type 0)",
 867		"Unknown interrupt (type 1)",
 868		"PC-Card eject button",
 869		"Sound/Brightness button",
 870		"ADB message",
 871		"Battery state change",
 872		"Environment interrupt",
 873		"Tick timer",
 874		"Ghost interrupt (zero len)",
 875		"Empty interrupt (empty mask)",
 876		"Max irqs in a row",
 877		"Total CB1 triggered events",
 878		"Total GPIO1 triggered events",
 879        };
 880
 881	for (i = 0; i < NUM_IRQ_STATS; i++) {
 882		seq_printf(m, " %2u: %10u (%s)\n",
 883			     i, pmu_irq_stats[i], irq_names[i]);
 884	}
 885	return 0;
 886}
 887
 888static int pmu_battery_proc_show(struct seq_file *m, void *v)
 889{
 890	long batnum = (long)m->private;
 891	
 892	seq_putc(m, '\n');
 893	seq_printf(m, "flags      : %08x\n", pmu_batteries[batnum].flags);
 894	seq_printf(m, "charge     : %d\n", pmu_batteries[batnum].charge);
 895	seq_printf(m, "max_charge : %d\n", pmu_batteries[batnum].max_charge);
 896	seq_printf(m, "current    : %d\n", pmu_batteries[batnum].amperage);
 897	seq_printf(m, "voltage    : %d\n", pmu_batteries[batnum].voltage);
 898	seq_printf(m, "time rem.  : %d\n", pmu_batteries[batnum].time_remaining);
 899	return 0;
 900}
 901
 902static int pmu_options_proc_show(struct seq_file *m, void *v)
 903{
 904#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 905	if (pmu_kind == PMU_KEYLARGO_BASED &&
 906	    pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
 907		seq_printf(m, "lid_wakeup=%d\n", option_lid_wakeup);
 908#endif
 909	if (pmu_kind == PMU_KEYLARGO_BASED)
 910		seq_printf(m, "server_mode=%d\n", option_server_mode);
 911
 912	return 0;
 913}
 914
 915static int pmu_options_proc_open(struct inode *inode, struct file *file)
 916{
 917	return single_open(file, pmu_options_proc_show, NULL);
 918}
 919
 920static ssize_t pmu_options_proc_write(struct file *file,
 921		const char __user *buffer, size_t count, loff_t *pos)
 922{
 923	char tmp[33];
 924	char *label, *val;
 925	size_t fcount = count;
 926	
 927	if (!count)
 928		return -EINVAL;
 929	if (count > 32)
 930		count = 32;
 931	if (copy_from_user(tmp, buffer, count))
 932		return -EFAULT;
 933	tmp[count] = 0;
 934
 935	label = tmp;
 936	while(*label == ' ')
 937		label++;
 938	val = label;
 939	while(*val && (*val != '=')) {
 940		if (*val == ' ')
 941			*val = 0;
 942		val++;
 943	}
 944	if ((*val) == 0)
 945		return -EINVAL;
 946	*(val++) = 0;
 947	while(*val == ' ')
 948		val++;
 949#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 950	if (pmu_kind == PMU_KEYLARGO_BASED &&
 951	    pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
 952		if (!strcmp(label, "lid_wakeup"))
 953			option_lid_wakeup = ((*val) == '1');
 954#endif
 955	if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) {
 956		int new_value;
 957		new_value = ((*val) == '1');
 958		if (new_value != option_server_mode)
 959			pmu_set_server_mode(new_value);
 960	}
 961	return fcount;
 962}
 963
 964static const struct proc_ops pmu_options_proc_ops = {
 965	.proc_open	= pmu_options_proc_open,
 966	.proc_read	= seq_read,
 967	.proc_lseek	= seq_lseek,
 968	.proc_release	= single_release,
 969	.proc_write	= pmu_options_proc_write,
 
 970};
 971#endif
 972
 973#ifdef CONFIG_ADB
 974/* Send an ADB command */
 975static int pmu_send_request(struct adb_request *req, int sync)
 976{
 977	int i, ret;
 978
 979	if (pmu_state == uninitialized || !pmu_fully_inited) {
 980		req->complete = 1;
 981		return -ENXIO;
 982	}
 983
 984	ret = -EINVAL;
 985
 986	switch (req->data[0]) {
 987	case PMU_PACKET:
 988		for (i = 0; i < req->nbytes - 1; ++i)
 989			req->data[i] = req->data[i+1];
 990		--req->nbytes;
 991		if (pmu_data_len[req->data[0]][1] != 0) {
 992			req->reply[0] = ADB_RET_OK;
 993			req->reply_len = 1;
 994		} else
 995			req->reply_len = 0;
 996		ret = pmu_queue_request(req);
 997		break;
 998	case CUDA_PACKET:
 999		switch (req->data[1]) {
1000		case CUDA_GET_TIME:
1001			if (req->nbytes != 2)
1002				break;
1003			req->data[0] = PMU_READ_RTC;
1004			req->nbytes = 1;
1005			req->reply_len = 3;
1006			req->reply[0] = CUDA_PACKET;
1007			req->reply[1] = 0;
1008			req->reply[2] = CUDA_GET_TIME;
1009			ret = pmu_queue_request(req);
1010			break;
1011		case CUDA_SET_TIME:
1012			if (req->nbytes != 6)
1013				break;
1014			req->data[0] = PMU_SET_RTC;
1015			req->nbytes = 5;
1016			for (i = 1; i <= 4; ++i)
1017				req->data[i] = req->data[i+1];
1018			req->reply_len = 3;
1019			req->reply[0] = CUDA_PACKET;
1020			req->reply[1] = 0;
1021			req->reply[2] = CUDA_SET_TIME;
1022			ret = pmu_queue_request(req);
1023			break;
1024		}
1025		break;
1026	case ADB_PACKET:
1027	    	if (!pmu_has_adb)
1028    			return -ENXIO;
1029		for (i = req->nbytes - 1; i > 1; --i)
1030			req->data[i+2] = req->data[i];
1031		req->data[3] = req->nbytes - 2;
1032		req->data[2] = pmu_adb_flags;
1033		/*req->data[1] = req->data[1];*/
1034		req->data[0] = PMU_ADB_CMD;
1035		req->nbytes += 2;
1036		req->reply_expected = 1;
1037		req->reply_len = 0;
1038		ret = pmu_queue_request(req);
1039		break;
1040	}
1041	if (ret) {
1042		req->complete = 1;
1043		return ret;
1044	}
1045
1046	if (sync)
1047		while (!req->complete)
1048			pmu_poll();
1049
1050	return 0;
1051}
1052
1053/* Enable/disable autopolling */
1054static int __pmu_adb_autopoll(int devs)
1055{
1056	struct adb_request req;
1057
1058	if (devs) {
1059		pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
1060			    adb_dev_map >> 8, adb_dev_map);
1061		pmu_adb_flags = 2;
1062	} else {
1063		pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
1064		pmu_adb_flags = 0;
1065	}
1066	while (!req.complete)
1067		pmu_poll();
1068	return 0;
1069}
1070
1071static int pmu_adb_autopoll(int devs)
1072{
1073	if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
1074		return -ENXIO;
1075
1076	adb_dev_map = devs;
1077	return __pmu_adb_autopoll(devs);
1078}
1079
1080/* Reset the ADB bus */
1081static int pmu_adb_reset_bus(void)
1082{
1083	struct adb_request req;
1084	int save_autopoll = adb_dev_map;
1085
1086	if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
1087		return -ENXIO;
1088
1089	/* anyone got a better idea?? */
1090	__pmu_adb_autopoll(0);
1091
1092	req.nbytes = 4;
1093	req.done = NULL;
1094	req.data[0] = PMU_ADB_CMD;
1095	req.data[1] = ADB_BUSRESET;
1096	req.data[2] = 0;
1097	req.data[3] = 0;
1098	req.data[4] = 0;
1099	req.reply_len = 0;
1100	req.reply_expected = 1;
1101	if (pmu_queue_request(&req) != 0) {
1102		printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
1103		return -EIO;
1104	}
1105	pmu_wait_complete(&req);
1106
1107	if (save_autopoll != 0)
1108		__pmu_adb_autopoll(save_autopoll);
1109
1110	return 0;
1111}
1112#endif /* CONFIG_ADB */
1113
1114/* Construct and send a pmu request */
1115int
1116pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
1117	    int nbytes, ...)
1118{
1119	va_list list;
1120	int i;
1121
1122	if (pmu_state == uninitialized)
1123		return -ENXIO;
1124
1125	if (nbytes < 0 || nbytes > 32) {
1126		printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
1127		req->complete = 1;
1128		return -EINVAL;
1129	}
1130	req->nbytes = nbytes;
1131	req->done = done;
1132	va_start(list, nbytes);
1133	for (i = 0; i < nbytes; ++i)
1134		req->data[i] = va_arg(list, int);
1135	va_end(list);
1136	req->reply_len = 0;
1137	req->reply_expected = 0;
1138	return pmu_queue_request(req);
1139}
1140
1141int
1142pmu_queue_request(struct adb_request *req)
1143{
1144	unsigned long flags;
1145	int nsend;
1146
1147	if (pmu_state == uninitialized) {
1148		req->complete = 1;
1149		return -ENXIO;
1150	}
1151	if (req->nbytes <= 0) {
1152		req->complete = 1;
1153		return 0;
1154	}
1155	nsend = pmu_data_len[req->data[0]][0];
1156	if (nsend >= 0 && req->nbytes != nsend + 1) {
1157		req->complete = 1;
1158		return -EINVAL;
1159	}
1160
1161	req->next = NULL;
1162	req->sent = 0;
1163	req->complete = 0;
1164
1165	spin_lock_irqsave(&pmu_lock, flags);
1166	if (current_req) {
1167		last_req->next = req;
1168		last_req = req;
1169	} else {
1170		current_req = req;
1171		last_req = req;
1172		if (pmu_state == idle)
1173			pmu_start();
1174	}
1175	spin_unlock_irqrestore(&pmu_lock, flags);
1176
1177	return 0;
1178}
1179
1180static inline void
1181wait_for_ack(void)
1182{
1183	/* Sightly increased the delay, I had one occurrence of the message
1184	 * reported
1185	 */
1186	int timeout = 4000;
1187	while ((in_8(&via2[B]) & TACK) == 0) {
1188		if (--timeout < 0) {
1189			printk(KERN_ERR "PMU not responding (!ack)\n");
1190			return;
1191		}
1192		udelay(10);
1193	}
1194}
1195
1196/* New PMU seems to be very sensitive to those timings, so we make sure
1197 * PCI is flushed immediately */
1198static inline void
1199send_byte(int x)
1200{
1201	out_8(&via1[ACR], in_8(&via1[ACR]) | SR_OUT | SR_EXT);
1202	out_8(&via1[SR], x);
1203	out_8(&via2[B], in_8(&via2[B]) & ~TREQ);	/* assert TREQ */
1204	(void)in_8(&via2[B]);
1205}
1206
1207static inline void
1208recv_byte(void)
1209{
1210	out_8(&via1[ACR], (in_8(&via1[ACR]) & ~SR_OUT) | SR_EXT);
1211	in_8(&via1[SR]);		/* resets SR */
1212	out_8(&via2[B], in_8(&via2[B]) & ~TREQ);
1213	(void)in_8(&via2[B]);
1214}
1215
1216static inline void
1217pmu_done(struct adb_request *req)
1218{
1219	void (*done)(struct adb_request *) = req->done;
1220	mb();
1221	req->complete = 1;
1222    	/* Here, we assume that if the request has a done member, the
1223    	 * struct request will survive to setting req->complete to 1
1224    	 */
1225	if (done)
1226		(*done)(req);
1227}
1228
1229static void
1230pmu_start(void)
1231{
1232	struct adb_request *req;
1233
1234	/* assert pmu_state == idle */
1235	/* get the packet to send */
1236	req = current_req;
1237	if (!req || pmu_state != idle
1238	    || (/*req->reply_expected && */req_awaiting_reply))
1239		return;
1240
1241	pmu_state = sending;
1242	data_index = 1;
1243	data_len = pmu_data_len[req->data[0]][0];
1244
1245	/* Sounds safer to make sure ACK is high before writing. This helped
1246	 * kill a problem with ADB and some iBooks
1247	 */
1248	wait_for_ack();
1249	/* set the shift register to shift out and send a byte */
1250	send_byte(req->data[0]);
1251}
1252
1253void
1254pmu_poll(void)
1255{
1256	if (pmu_state == uninitialized)
1257		return;
1258	if (disable_poll)
1259		return;
1260	via_pmu_interrupt(0, NULL);
1261}
1262
1263void
1264pmu_poll_adb(void)
1265{
1266	if (pmu_state == uninitialized)
1267		return;
1268	if (disable_poll)
1269		return;
1270	/* Kicks ADB read when PMU is suspended */
1271	adb_int_pending = 1;
1272	do {
1273		via_pmu_interrupt(0, NULL);
1274	} while (pmu_suspended && (adb_int_pending || pmu_state != idle
1275		|| req_awaiting_reply));
1276}
1277
1278void
1279pmu_wait_complete(struct adb_request *req)
1280{
1281	if (pmu_state == uninitialized)
1282		return;
1283	while((pmu_state != idle && pmu_state != locked) || !req->complete)
1284		via_pmu_interrupt(0, NULL);
1285}
1286
1287/* This function loops until the PMU is idle and prevents it from
1288 * anwsering to ADB interrupts. pmu_request can still be called.
1289 * This is done to avoid spurrious shutdowns when we know we'll have
1290 * interrupts switched off for a long time
1291 */
1292void
1293pmu_suspend(void)
1294{
1295	unsigned long flags;
1296
1297	if (pmu_state == uninitialized)
1298		return;
1299	
1300	spin_lock_irqsave(&pmu_lock, flags);
1301	pmu_suspended++;
1302	if (pmu_suspended > 1) {
1303		spin_unlock_irqrestore(&pmu_lock, flags);
1304		return;
1305	}
1306
1307	do {
1308		spin_unlock_irqrestore(&pmu_lock, flags);
1309		if (req_awaiting_reply)
1310			adb_int_pending = 1;
1311		via_pmu_interrupt(0, NULL);
1312		spin_lock_irqsave(&pmu_lock, flags);
1313		if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
1314			if (gpio_irq >= 0)
1315				disable_irq_nosync(gpio_irq);
1316			out_8(&via1[IER], CB1_INT | IER_CLR);
1317			spin_unlock_irqrestore(&pmu_lock, flags);
1318			break;
1319		}
1320	} while (1);
1321}
1322
1323void
1324pmu_resume(void)
1325{
1326	unsigned long flags;
1327
1328	if (pmu_state == uninitialized || pmu_suspended < 1)
1329		return;
1330
1331	spin_lock_irqsave(&pmu_lock, flags);
1332	pmu_suspended--;
1333	if (pmu_suspended > 0) {
1334		spin_unlock_irqrestore(&pmu_lock, flags);
1335		return;
1336	}
1337	adb_int_pending = 1;
1338	if (gpio_irq >= 0)
1339		enable_irq(gpio_irq);
1340	out_8(&via1[IER], CB1_INT | IER_SET);
1341	spin_unlock_irqrestore(&pmu_lock, flags);
1342	pmu_poll();
1343}
1344
1345/* Interrupt data could be the result data from an ADB cmd */
1346static void
1347pmu_handle_data(unsigned char *data, int len)
1348{
1349	unsigned char ints;
1350	int idx;
1351	int i = 0;
1352
1353	asleep = 0;
1354	if (drop_interrupts || len < 1) {
1355		adb_int_pending = 0;
1356		pmu_irq_stats[8]++;
1357		return;
1358	}
1359
1360	/* Get PMU interrupt mask */
1361	ints = data[0];
1362
1363	/* Record zero interrupts for stats */
1364	if (ints == 0)
1365		pmu_irq_stats[9]++;
1366
1367	/* Hack to deal with ADB autopoll flag */
1368	if (ints & PMU_INT_ADB)
1369		ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
1370
1371next:
1372	if (ints == 0) {
1373		if (i > pmu_irq_stats[10])
1374			pmu_irq_stats[10] = i;
1375		return;
1376	}
1377	i++;
1378
1379	idx = ffs(ints) - 1;
1380	ints &= ~BIT(idx);
1381
1382	pmu_irq_stats[idx]++;
1383
1384	/* Note: for some reason, we get an interrupt with len=1,
1385	 * data[0]==0 after each normal ADB interrupt, at least
1386	 * on the Pismo. Still investigating...  --BenH
1387	 */
1388	switch (BIT(idx)) {
1389	case PMU_INT_ADB:
1390		if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
1391			struct adb_request *req = req_awaiting_reply;
1392			if (!req) {
1393				printk(KERN_ERR "PMU: extra ADB reply\n");
1394				return;
1395			}
1396			req_awaiting_reply = NULL;
1397			if (len <= 2)
1398				req->reply_len = 0;
1399			else {
1400				memcpy(req->reply, data + 1, len - 1);
1401				req->reply_len = len - 1;
1402			}
1403			pmu_done(req);
1404		} else {
1405#ifdef CONFIG_XMON
1406			if (len == 4 && data[1] == 0x2c) {
1407				extern int xmon_wants_key, xmon_adb_keycode;
1408				if (xmon_wants_key) {
1409					xmon_adb_keycode = data[2];
1410					return;
1411				}
1412			}
1413#endif /* CONFIG_XMON */
1414#ifdef CONFIG_ADB
1415			/*
1416			 * XXX On the [23]400 the PMU gives us an up
1417			 * event for keycodes 0x74 or 0x75 when the PC
1418			 * card eject buttons are released, so we
1419			 * ignore those events.
1420			 */
1421			if (!(pmu_kind == PMU_OHARE_BASED && len == 4
1422			      && data[1] == 0x2c && data[3] == 0xff
1423			      && (data[2] & ~1) == 0xf4))
1424				adb_input(data+1, len-1, 1);
1425#endif /* CONFIG_ADB */		
1426		}
1427		break;
1428
1429	/* Sound/brightness button pressed */
1430	case PMU_INT_SNDBRT:
1431#ifdef CONFIG_PMAC_BACKLIGHT
1432		if (len == 3)
1433			pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4);
1434#endif
1435		break;
1436
1437	/* Tick interrupt */
1438	case PMU_INT_TICK:
1439		/* Environment or tick interrupt, query batteries */
1440		if (pmu_battery_count) {
1441			if ((--query_batt_timer) == 0) {
1442				query_battery_state();
1443				query_batt_timer = BATTERY_POLLING_COUNT;
1444			}
1445		}
1446		break;
1447
1448	case PMU_INT_ENVIRONMENT:
1449		if (pmu_battery_count)
1450			query_battery_state();
1451		pmu_pass_intr(data, len);
1452		/* len == 6 is probably a bad check. But how do I
1453		 * know what PMU versions send what events here? */
1454		if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) {
1455			via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
1456			via_pmu_event(PMU_EVT_LID, data[1]&1);
1457		}
1458		break;
1459
1460	default:
1461	       pmu_pass_intr(data, len);
1462	}
1463	goto next;
1464}
1465
1466static struct adb_request*
1467pmu_sr_intr(void)
1468{
1469	struct adb_request *req;
1470	int bite = 0;
1471
1472	if (in_8(&via2[B]) & TREQ) {
1473		printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via2[B]));
1474		return NULL;
1475	}
1476	/* The ack may not yet be low when we get the interrupt */
1477	while ((in_8(&via2[B]) & TACK) != 0)
1478			;
1479
1480	/* if reading grab the byte, and reset the interrupt */
1481	if (pmu_state == reading || pmu_state == reading_intr)
1482		bite = in_8(&via1[SR]);
1483
1484	/* reset TREQ and wait for TACK to go high */
1485	out_8(&via2[B], in_8(&via2[B]) | TREQ);
1486	wait_for_ack();
1487
1488	switch (pmu_state) {
1489	case sending:
1490		req = current_req;
1491		if (data_len < 0) {
1492			data_len = req->nbytes - 1;
1493			send_byte(data_len);
1494			break;
1495		}
1496		if (data_index <= data_len) {
1497			send_byte(req->data[data_index++]);
1498			break;
1499		}
1500		req->sent = 1;
1501		data_len = pmu_data_len[req->data[0]][1];
1502		if (data_len == 0) {
1503			pmu_state = idle;
1504			current_req = req->next;
1505			if (req->reply_expected)
1506				req_awaiting_reply = req;
1507			else
1508				return req;
1509		} else {
1510			pmu_state = reading;
1511			data_index = 0;
1512			reply_ptr = req->reply + req->reply_len;
1513			recv_byte();
1514		}
1515		break;
1516
1517	case intack:
1518		data_index = 0;
1519		data_len = -1;
1520		pmu_state = reading_intr;
1521		reply_ptr = interrupt_data[int_data_last];
1522		recv_byte();
1523		if (gpio_irq >= 0 && !gpio_irq_enabled) {
1524			enable_irq(gpio_irq);
1525			gpio_irq_enabled = 1;
1526		}
1527		break;
1528
1529	case reading:
1530	case reading_intr:
1531		if (data_len == -1) {
1532			data_len = bite;
1533			if (bite > 32)
1534				printk(KERN_ERR "PMU: bad reply len %d\n", bite);
1535		} else if (data_index < 32) {
1536			reply_ptr[data_index++] = bite;
1537		}
1538		if (data_index < data_len) {
1539			recv_byte();
1540			break;
1541		}
1542
1543		if (pmu_state == reading_intr) {
1544			pmu_state = idle;
1545			int_data_state[int_data_last] = int_data_ready;
1546			interrupt_data_len[int_data_last] = data_len;
1547		} else {
1548			req = current_req;
1549			/* 
1550			 * For PMU sleep and freq change requests, we lock the
1551			 * PMU until it's explicitly unlocked. This avoids any
1552			 * spurrious event polling getting in
1553			 */
1554			current_req = req->next;
1555			req->reply_len += data_index;
1556			if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED)
1557				pmu_state = locked;
1558			else
1559				pmu_state = idle;
1560			return req;
1561		}
1562		break;
1563
1564	default:
1565		printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n",
1566		       pmu_state);
1567	}
1568	return NULL;
1569}
1570
1571static irqreturn_t
1572via_pmu_interrupt(int irq, void *arg)
1573{
1574	unsigned long flags;
1575	int intr;
1576	int nloop = 0;
1577	int int_data = -1;
1578	struct adb_request *req = NULL;
1579	int handled = 0;
1580
1581	/* This is a bit brutal, we can probably do better */
1582	spin_lock_irqsave(&pmu_lock, flags);
1583	++disable_poll;
1584	
1585	for (;;) {
1586		/* On 68k Macs, VIA interrupts are dispatched individually.
1587		 * Unless we are polling, the relevant IRQ flag has already
1588		 * been cleared.
1589		 */
1590		intr = 0;
1591		if (IS_ENABLED(CONFIG_PPC_PMAC) || !irq) {
1592			intr = in_8(&via1[IFR]) & (SR_INT | CB1_INT);
1593			out_8(&via1[IFR], intr);
1594		}
1595#ifndef CONFIG_PPC_PMAC
1596		switch (irq) {
1597		case IRQ_MAC_ADB_CL:
1598			intr = CB1_INT;
1599			break;
1600		case IRQ_MAC_ADB_SR:
1601			intr = SR_INT;
1602			break;
1603		}
1604#endif
1605		if (intr == 0)
1606			break;
1607		handled = 1;
1608		if (++nloop > 1000) {
1609			printk(KERN_DEBUG "PMU: stuck in intr loop, "
1610			       "intr=%x, ier=%x pmu_state=%d\n",
1611			       intr, in_8(&via1[IER]), pmu_state);
1612			break;
1613		}
1614		if (intr & CB1_INT) {
1615			adb_int_pending = 1;
1616			pmu_irq_stats[11]++;
1617		}
1618		if (intr & SR_INT) {
1619			req = pmu_sr_intr();
1620			if (req)
1621				break;
1622		}
1623#ifndef CONFIG_PPC_PMAC
1624		break;
1625#endif
1626	}
1627
1628recheck:
1629	if (pmu_state == idle) {
1630		if (adb_int_pending) {
1631			if (int_data_state[0] == int_data_empty)
1632				int_data_last = 0;
1633			else if (int_data_state[1] == int_data_empty)
1634				int_data_last = 1;
1635			else
1636				goto no_free_slot;
1637			pmu_state = intack;
1638			int_data_state[int_data_last] = int_data_fill;
1639			/* Sounds safer to make sure ACK is high before writing.
1640			 * This helped kill a problem with ADB and some iBooks
1641			 */
1642			wait_for_ack();
1643			send_byte(PMU_INT_ACK);
1644			adb_int_pending = 0;
1645		} else if (current_req)
1646			pmu_start();
1647	}
1648no_free_slot:			
1649	/* Mark the oldest buffer for flushing */
1650	if (int_data_state[!int_data_last] == int_data_ready) {
1651		int_data_state[!int_data_last] = int_data_flush;
1652		int_data = !int_data_last;
1653	} else if (int_data_state[int_data_last] == int_data_ready) {
1654		int_data_state[int_data_last] = int_data_flush;
1655		int_data = int_data_last;
1656	}
1657	--disable_poll;
1658	spin_unlock_irqrestore(&pmu_lock, flags);
1659
1660	/* Deal with completed PMU requests outside of the lock */
1661	if (req) {
1662		pmu_done(req);
1663		req = NULL;
1664	}
1665		
1666	/* Deal with interrupt datas outside of the lock */
1667	if (int_data >= 0) {
1668		pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data]);
1669		spin_lock_irqsave(&pmu_lock, flags);
1670		++disable_poll;
1671		int_data_state[int_data] = int_data_empty;
1672		int_data = -1;
1673		goto recheck;
1674	}
1675
1676	return IRQ_RETVAL(handled);
1677}
1678
1679void
1680pmu_unlock(void)
1681{
1682	unsigned long flags;
1683
1684	spin_lock_irqsave(&pmu_lock, flags);
1685	if (pmu_state == locked)
1686		pmu_state = idle;
1687	adb_int_pending = 1;
1688	spin_unlock_irqrestore(&pmu_lock, flags);
1689}
1690
1691
1692static __maybe_unused irqreturn_t
1693gpio1_interrupt(int irq, void *arg)
1694{
1695	unsigned long flags;
1696
1697	if ((in_8(gpio_reg + 0x9) & 0x02) == 0) {
1698		spin_lock_irqsave(&pmu_lock, flags);
1699		if (gpio_irq_enabled > 0) {
1700			disable_irq_nosync(gpio_irq);
1701			gpio_irq_enabled = 0;
1702		}
1703		pmu_irq_stats[12]++;
1704		adb_int_pending = 1;
1705		spin_unlock_irqrestore(&pmu_lock, flags);
1706		via_pmu_interrupt(0, NULL);
1707		return IRQ_HANDLED;
1708	}
1709	return IRQ_NONE;
1710}
1711
1712void
1713pmu_enable_irled(int on)
1714{
1715	struct adb_request req;
1716
1717	if (pmu_state == uninitialized)
1718		return ;
1719	if (pmu_kind == PMU_KEYLARGO_BASED)
1720		return ;
1721
1722	pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
1723	    (on ? PMU_POW_ON : PMU_POW_OFF));
1724	pmu_wait_complete(&req);
1725}
1726
1727/* Offset between Unix time (1970-based) and Mac time (1904-based) */
1728#define RTC_OFFSET	2082844800
1729
1730time64_t pmu_get_time(void)
1731{
1732	struct adb_request req;
1733	u32 now;
1734
1735	if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
1736		return 0;
1737	pmu_wait_complete(&req);
1738	if (req.reply_len != 4)
1739		pr_err("%s: got %d byte reply\n", __func__, req.reply_len);
1740	now = (req.reply[0] << 24) + (req.reply[1] << 16) +
1741	      (req.reply[2] << 8) + req.reply[3];
1742	return (time64_t)now - RTC_OFFSET;
1743}
1744
1745int pmu_set_rtc_time(struct rtc_time *tm)
1746{
1747	u32 now;
1748	struct adb_request req;
1749
1750	now = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET);
1751	if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
1752	                now >> 24, now >> 16, now >> 8, now) < 0)
1753		return -ENXIO;
1754	pmu_wait_complete(&req);
1755	if (req.reply_len != 0)
1756		pr_err("%s: got %d byte reply\n", __func__, req.reply_len);
1757	return 0;
1758}
1759
1760void
1761pmu_restart(void)
1762{
1763	struct adb_request req;
1764
1765	if (pmu_state == uninitialized)
1766		return;
1767
1768	local_irq_disable();
1769
1770	drop_interrupts = 1;
1771	
1772	if (pmu_kind != PMU_KEYLARGO_BASED) {
1773		pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1774						PMU_INT_TICK );
1775		while(!req.complete)
1776			pmu_poll();
1777	}
1778
1779	pmu_request(&req, NULL, 1, PMU_RESET);
1780	pmu_wait_complete(&req);
1781	for (;;)
1782		;
1783}
1784
1785void
1786pmu_shutdown(void)
1787{
1788	struct adb_request req;
1789
1790	if (pmu_state == uninitialized)
1791		return;
1792
1793	local_irq_disable();
1794
1795	drop_interrupts = 1;
1796
1797	if (pmu_kind != PMU_KEYLARGO_BASED) {
1798		pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1799						PMU_INT_TICK );
1800		pmu_wait_complete(&req);
1801	} else {
1802		/* Disable server mode on shutdown or we'll just
1803		 * wake up again
1804		 */
1805		pmu_set_server_mode(0);
1806	}
1807
1808	pmu_request(&req, NULL, 5, PMU_SHUTDOWN,
1809		    'M', 'A', 'T', 'T');
1810	pmu_wait_complete(&req);
1811	for (;;)
1812		;
1813}
1814
1815int
1816pmu_present(void)
1817{
1818	return pmu_state != uninitialized;
1819}
1820
1821#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
1822/*
1823 * Put the powerbook to sleep.
1824 */
1825 
1826static u32 save_via[8];
1827static int __fake_sleep;
1828
1829static void
1830save_via_state(void)
1831{
1832	save_via[0] = in_8(&via1[ANH]);
1833	save_via[1] = in_8(&via1[DIRA]);
1834	save_via[2] = in_8(&via1[B]);
1835	save_via[3] = in_8(&via1[DIRB]);
1836	save_via[4] = in_8(&via1[PCR]);
1837	save_via[5] = in_8(&via1[ACR]);
1838	save_via[6] = in_8(&via1[T1CL]);
1839	save_via[7] = in_8(&via1[T1CH]);
1840}
1841static void
1842restore_via_state(void)
1843{
1844	out_8(&via1[ANH],  save_via[0]);
1845	out_8(&via1[DIRA], save_via[1]);
1846	out_8(&via1[B],    save_via[2]);
1847	out_8(&via1[DIRB], save_via[3]);
1848	out_8(&via1[PCR],  save_via[4]);
1849	out_8(&via1[ACR],  save_via[5]);
1850	out_8(&via1[T1CL], save_via[6]);
1851	out_8(&via1[T1CH], save_via[7]);
1852	out_8(&via1[IER], IER_CLR | 0x7f);	/* disable all intrs */
1853	out_8(&via1[IFR], 0x7f);			/* clear IFR */
1854	out_8(&via1[IER], IER_SET | SR_INT | CB1_INT);
1855}
1856
1857#define	GRACKLE_PM	(1<<7)
1858#define GRACKLE_DOZE	(1<<5)
1859#define	GRACKLE_NAP	(1<<4)
1860#define	GRACKLE_SLEEP	(1<<3)
1861
1862static int powerbook_sleep_grackle(void)
1863{
1864	unsigned long save_l2cr;
1865	unsigned short pmcr1;
1866	struct adb_request req;
1867	struct pci_dev *grackle;
1868
1869	grackle = pci_get_domain_bus_and_slot(0, 0, 0);
1870	if (!grackle)
1871		return -ENODEV;
1872
1873	/* Turn off various things. Darwin does some retry tests here... */
1874	pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
1875	pmu_wait_complete(&req);
1876	pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1877		PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1878	pmu_wait_complete(&req);
1879
1880	/* For 750, save backside cache setting and disable it */
1881	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
1882
1883	if (!__fake_sleep) {
1884		/* Ask the PMU to put us to sleep */
1885		pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1886		pmu_wait_complete(&req);
1887	}
1888
1889	/* The VIA is supposed not to be restored correctly*/
1890	save_via_state();
1891	/* We shut down some HW */
1892	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
1893
1894	pci_read_config_word(grackle, 0x70, &pmcr1);
1895	/* Apparently, MacOS uses NAP mode for Grackle ??? */
1896	pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP); 
1897	pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
1898	pci_write_config_word(grackle, 0x70, pmcr1);
1899
1900	/* Call low-level ASM sleep handler */
1901	if (__fake_sleep)
1902		mdelay(5000);
1903	else
1904		low_sleep_handler();
1905
1906	/* We're awake again, stop grackle PM */
1907	pci_read_config_word(grackle, 0x70, &pmcr1);
1908	pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP); 
1909	pci_write_config_word(grackle, 0x70, pmcr1);
1910
1911	pci_dev_put(grackle);
1912
1913	/* Make sure the PMU is idle */
1914	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
1915	restore_via_state();
1916	
1917	/* Restore L2 cache */
1918	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
1919 		_set_L2CR(save_l2cr);
1920	
1921	/* Restore userland MMU context */
1922	switch_mmu_context(NULL, current->active_mm, NULL);
1923
1924	/* Power things up */
1925	pmu_unlock();
1926	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
1927	pmu_wait_complete(&req);
1928	pmu_request(&req, NULL, 2, PMU_POWER_CTRL0,
1929			PMU_POW0_ON|PMU_POW0_HARD_DRIVE);
1930	pmu_wait_complete(&req);
1931	pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1932			PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1933	pmu_wait_complete(&req);
1934
1935	return 0;
1936}
1937
1938static int
1939powerbook_sleep_Core99(void)
1940{
1941	unsigned long save_l2cr;
1942	unsigned long save_l3cr;
1943	struct adb_request req;
1944	
1945	if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
1946		printk(KERN_ERR "Sleep mode not supported on this machine\n");
1947		return -ENOSYS;
1948	}
1949
1950	if (num_online_cpus() > 1 || cpu_is_offline(0))
1951		return -EAGAIN;
1952
1953	/* Stop environment and ADB interrupts */
1954	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
1955	pmu_wait_complete(&req);
1956
1957	/* Tell PMU what events will wake us up */
1958	pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
1959		0xff, 0xff);
1960	pmu_wait_complete(&req);
1961	pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS,
1962		0, PMU_PWR_WAKEUP_KEY |
1963		(option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0));
1964	pmu_wait_complete(&req);
1965
1966	/* Save the state of the L2 and L3 caches */
1967	save_l3cr = _get_L3CR();	/* (returns -1 if not available) */
1968	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
1969
1970	if (!__fake_sleep) {
1971		/* Ask the PMU to put us to sleep */
1972		pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1973		pmu_wait_complete(&req);
1974	}
1975
1976	/* The VIA is supposed not to be restored correctly*/
1977	save_via_state();
1978
1979	/* Shut down various ASICs. There's a chance that we can no longer
1980	 * talk to the PMU after this, so I moved it to _after_ sending the
1981	 * sleep command to it. Still need to be checked.
1982	 */
1983	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
1984
1985	/* Call low-level ASM sleep handler */
1986	if (__fake_sleep)
1987		mdelay(5000);
1988	else
1989		low_sleep_handler();
1990
1991	/* Restore Apple core ASICs state */
1992	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
1993
1994	/* Restore VIA */
1995	restore_via_state();
1996
1997	/* tweak LPJ before cpufreq is there */
1998	loops_per_jiffy *= 2;
1999
2000	/* Restore video */
2001	pmac_call_early_video_resume();
2002
2003	/* Restore L2 cache */
2004	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
2005 		_set_L2CR(save_l2cr);
2006	/* Restore L3 cache */
2007	if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
2008 		_set_L3CR(save_l3cr);
2009	
2010	/* Restore userland MMU context */
2011	switch_mmu_context(NULL, current->active_mm, NULL);
2012
2013	/* Tell PMU we are ready */
2014	pmu_unlock();
2015	pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
2016	pmu_wait_complete(&req);
2017	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
2018	pmu_wait_complete(&req);
2019
2020	/* Restore LPJ, cpufreq will adjust the cpu frequency */
2021	loops_per_jiffy /= 2;
2022
2023	return 0;
2024}
2025
2026#define PB3400_MEM_CTRL		0xf8000000
2027#define PB3400_MEM_CTRL_SLEEP	0x70
2028
2029static void __iomem *pb3400_mem_ctrl;
2030
2031static void powerbook_sleep_init_3400(void)
2032{
2033	/* map in the memory controller registers */
2034	pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
2035	if (pb3400_mem_ctrl == NULL)
2036		printk(KERN_WARNING "ioremap failed: sleep won't be possible");
2037}
2038
2039static int powerbook_sleep_3400(void)
2040{
2041	int i, x;
2042	unsigned int hid0;
2043	unsigned long msr;
2044	struct adb_request sleep_req;
2045	unsigned int __iomem *mem_ctrl_sleep;
2046
2047	if (pb3400_mem_ctrl == NULL)
2048		return -ENOMEM;
2049	mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;
2050
2051	/* Set the memory controller to keep the memory refreshed
2052	   while we're asleep */
2053	for (i = 0x403f; i >= 0x4000; --i) {
2054		out_be32(mem_ctrl_sleep, i);
2055		do {
2056			x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff;
2057		} while (x == 0);
2058		if (x >= 0x100)
2059			break;
2060	}
2061
2062	/* Ask the PMU to put us to sleep */
2063	pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
2064	pmu_wait_complete(&sleep_req);
2065	pmu_unlock();
2066
2067	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
2068
2069	asleep = 1;
2070
2071	/* Put the CPU into sleep mode */
2072	hid0 = mfspr(SPRN_HID0);
2073	hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
2074	mtspr(SPRN_HID0, hid0);
2075	local_irq_enable();
2076	msr = mfmsr() | MSR_POW;
2077	while (asleep) {
2078		mb();
2079		mtmsr(msr);
2080		isync();
2081	}
2082	local_irq_disable();
2083
2084	/* OK, we're awake again, start restoring things */
2085	out_be32(mem_ctrl_sleep, 0x3f);
2086	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
2087
2088	return 0;
2089}
2090
2091#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2092
2093/*
2094 * Support for /dev/pmu device
2095 */
2096#define RB_SIZE		0x10
2097struct pmu_private {
2098	struct list_head list;
2099	int	rb_get;
2100	int	rb_put;
2101	struct rb_entry {
2102		unsigned short len;
2103		unsigned char data[16];
2104	}	rb_buf[RB_SIZE];
2105	wait_queue_head_t wait;
2106	spinlock_t lock;
2107#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2108	int	backlight_locker;
2109#endif
2110};
2111
2112static LIST_HEAD(all_pmu_pvt);
2113static DEFINE_SPINLOCK(all_pvt_lock);
2114
2115static void
2116pmu_pass_intr(unsigned char *data, int len)
2117{
2118	struct pmu_private *pp;
2119	struct list_head *list;
2120	int i;
2121	unsigned long flags;
2122
2123	if (len > sizeof(pp->rb_buf[0].data))
2124		len = sizeof(pp->rb_buf[0].data);
2125	spin_lock_irqsave(&all_pvt_lock, flags);
2126	for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) {
2127		pp = list_entry(list, struct pmu_private, list);
2128		spin_lock(&pp->lock);
2129		i = pp->rb_put + 1;
2130		if (i >= RB_SIZE)
2131			i = 0;
2132		if (i != pp->rb_get) {
2133			struct rb_entry *rp = &pp->rb_buf[pp->rb_put];
2134			rp->len = len;
2135			memcpy(rp->data, data, len);
2136			pp->rb_put = i;
2137			wake_up_interruptible(&pp->wait);
2138		}
2139		spin_unlock(&pp->lock);
2140	}
2141	spin_unlock_irqrestore(&all_pvt_lock, flags);
2142}
2143
2144static int
2145pmu_open(struct inode *inode, struct file *file)
2146{
2147	struct pmu_private *pp;
2148	unsigned long flags;
2149
2150	pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL);
2151	if (!pp)
2152		return -ENOMEM;
2153	pp->rb_get = pp->rb_put = 0;
2154	spin_lock_init(&pp->lock);
2155	init_waitqueue_head(&pp->wait);
2156	mutex_lock(&pmu_info_proc_mutex);
2157	spin_lock_irqsave(&all_pvt_lock, flags);
2158#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2159	pp->backlight_locker = 0;
2160#endif
2161	list_add(&pp->list, &all_pmu_pvt);
2162	spin_unlock_irqrestore(&all_pvt_lock, flags);
2163	file->private_data = pp;
2164	mutex_unlock(&pmu_info_proc_mutex);
2165	return 0;
2166}
2167
2168static ssize_t 
2169pmu_read(struct file *file, char __user *buf,
2170			size_t count, loff_t *ppos)
2171{
2172	struct pmu_private *pp = file->private_data;
2173	DECLARE_WAITQUEUE(wait, current);
2174	unsigned long flags;
2175	int ret = 0;
2176
2177	if (count < 1 || !pp)
2178		return -EINVAL;
 
 
2179
2180	spin_lock_irqsave(&pp->lock, flags);
2181	add_wait_queue(&pp->wait, &wait);
2182	set_current_state(TASK_INTERRUPTIBLE);
2183
2184	for (;;) {
2185		ret = -EAGAIN;
2186		if (pp->rb_get != pp->rb_put) {
2187			int i = pp->rb_get;
2188			struct rb_entry *rp = &pp->rb_buf[i];
2189			ret = rp->len;
2190			spin_unlock_irqrestore(&pp->lock, flags);
2191			if (ret > count)
2192				ret = count;
2193			if (ret > 0 && copy_to_user(buf, rp->data, ret))
2194				ret = -EFAULT;
2195			if (++i >= RB_SIZE)
2196				i = 0;
2197			spin_lock_irqsave(&pp->lock, flags);
2198			pp->rb_get = i;
2199		}
2200		if (ret >= 0)
2201			break;
2202		if (file->f_flags & O_NONBLOCK)
2203			break;
2204		ret = -ERESTARTSYS;
2205		if (signal_pending(current))
2206			break;
2207		spin_unlock_irqrestore(&pp->lock, flags);
2208		schedule();
2209		spin_lock_irqsave(&pp->lock, flags);
2210	}
2211	__set_current_state(TASK_RUNNING);
2212	remove_wait_queue(&pp->wait, &wait);
2213	spin_unlock_irqrestore(&pp->lock, flags);
2214	
2215	return ret;
2216}
2217
2218static ssize_t
2219pmu_write(struct file *file, const char __user *buf,
2220			 size_t count, loff_t *ppos)
2221{
2222	return 0;
2223}
2224
2225static __poll_t
2226pmu_fpoll(struct file *filp, poll_table *wait)
2227{
2228	struct pmu_private *pp = filp->private_data;
2229	__poll_t mask = 0;
2230	unsigned long flags;
2231	
2232	if (!pp)
2233		return 0;
2234	poll_wait(filp, &pp->wait, wait);
2235	spin_lock_irqsave(&pp->lock, flags);
2236	if (pp->rb_get != pp->rb_put)
2237		mask |= EPOLLIN;
2238	spin_unlock_irqrestore(&pp->lock, flags);
2239	return mask;
2240}
2241
2242static int
2243pmu_release(struct inode *inode, struct file *file)
2244{
2245	struct pmu_private *pp = file->private_data;
2246	unsigned long flags;
2247
2248	if (pp) {
2249		file->private_data = NULL;
2250		spin_lock_irqsave(&all_pvt_lock, flags);
2251		list_del(&pp->list);
2252		spin_unlock_irqrestore(&all_pvt_lock, flags);
2253
2254#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2255		if (pp->backlight_locker)
2256			pmac_backlight_enable();
2257#endif
2258
2259		kfree(pp);
2260	}
2261	return 0;
2262}
2263
2264#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2265static void pmac_suspend_disable_irqs(void)
2266{
2267	/* Call platform functions marked "on sleep" */
2268	pmac_pfunc_i2c_suspend();
2269	pmac_pfunc_base_suspend();
2270}
2271
2272static int powerbook_sleep(suspend_state_t state)
2273{
2274	int error = 0;
2275
2276	/* Wait for completion of async requests */
2277	while (!batt_req.complete)
2278		pmu_poll();
2279
2280	/* Giveup the lazy FPU & vec so we don't have to back them
2281	 * up from the low level code
2282	 */
2283	enable_kernel_fp();
2284
2285#ifdef CONFIG_ALTIVEC
2286	if (cpu_has_feature(CPU_FTR_ALTIVEC))
2287		enable_kernel_altivec();
2288#endif /* CONFIG_ALTIVEC */
2289
2290	switch (pmu_kind) {
2291	case PMU_OHARE_BASED:
2292		error = powerbook_sleep_3400();
2293		break;
2294	case PMU_HEATHROW_BASED:
2295	case PMU_PADDINGTON_BASED:
2296		error = powerbook_sleep_grackle();
2297		break;
2298	case PMU_KEYLARGO_BASED:
2299		error = powerbook_sleep_Core99();
2300		break;
2301	default:
2302		return -ENOSYS;
2303	}
2304
2305	if (error)
2306		return error;
2307
2308	mdelay(100);
2309
2310	return 0;
2311}
2312
2313static void pmac_suspend_enable_irqs(void)
2314{
2315	/* Force a poll of ADB interrupts */
2316	adb_int_pending = 1;
2317	via_pmu_interrupt(0, NULL);
2318
2319	mdelay(10);
2320
2321	/* Call platform functions marked "on wake" */
2322	pmac_pfunc_base_resume();
2323	pmac_pfunc_i2c_resume();
2324}
2325
2326static int pmu_sleep_valid(suspend_state_t state)
2327{
2328	return state == PM_SUSPEND_MEM
2329		&& (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
2330}
2331
2332static const struct platform_suspend_ops pmu_pm_ops = {
2333	.enter = powerbook_sleep,
2334	.valid = pmu_sleep_valid,
2335};
2336
2337static int __init register_pmu_pm_ops(void)
2338{
2339	if (pmu_kind == PMU_OHARE_BASED)
2340		powerbook_sleep_init_3400();
2341	ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs;
2342	ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs;
2343	suspend_set_ops(&pmu_pm_ops);
2344
2345	return 0;
2346}
2347
2348device_initcall(register_pmu_pm_ops);
2349#endif
2350
2351static int pmu_ioctl(struct file *filp,
2352		     u_int cmd, u_long arg)
2353{
2354	__u32 __user *argp = (__u32 __user *)arg;
2355	int error = -EINVAL;
2356
2357	switch (cmd) {
2358#ifdef CONFIG_PPC_PMAC
2359	case PMU_IOC_SLEEP:
2360		if (!capable(CAP_SYS_ADMIN))
2361			return -EACCES;
2362		return pm_suspend(PM_SUSPEND_MEM);
2363	case PMU_IOC_CAN_SLEEP:
2364		if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0)
2365			return put_user(0, argp);
2366		else
2367			return put_user(1, argp);
2368#endif
2369
2370#ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
2371	/* Compatibility ioctl's for backlight */
2372	case PMU_IOC_GET_BACKLIGHT:
2373	{
2374		int brightness;
2375
2376		brightness = pmac_backlight_get_legacy_brightness();
2377		if (brightness < 0)
2378			return brightness;
2379		else
2380			return put_user(brightness, argp);
2381
2382	}
2383	case PMU_IOC_SET_BACKLIGHT:
2384	{
2385		int brightness;
2386
2387		error = get_user(brightness, argp);
2388		if (error)
2389			return error;
2390
2391		return pmac_backlight_set_legacy_brightness(brightness);
2392	}
2393#ifdef CONFIG_INPUT_ADBHID
2394	case PMU_IOC_GRAB_BACKLIGHT: {
2395		struct pmu_private *pp = filp->private_data;
2396
2397		if (pp->backlight_locker)
2398			return 0;
2399
2400		pp->backlight_locker = 1;
2401		pmac_backlight_disable();
2402
2403		return 0;
2404	}
2405#endif /* CONFIG_INPUT_ADBHID */
2406#endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */
2407
2408	case PMU_IOC_GET_MODEL:
2409	    	return put_user(pmu_kind, argp);
2410	case PMU_IOC_HAS_ADB:
2411		return put_user(pmu_has_adb, argp);
2412	}
2413	return error;
2414}
2415
2416static long pmu_unlocked_ioctl(struct file *filp,
2417			       u_int cmd, u_long arg)
2418{
2419	int ret;
2420
2421	mutex_lock(&pmu_info_proc_mutex);
2422	ret = pmu_ioctl(filp, cmd, arg);
2423	mutex_unlock(&pmu_info_proc_mutex);
2424
2425	return ret;
2426}
2427
2428#ifdef CONFIG_COMPAT
2429#define PMU_IOC_GET_BACKLIGHT32	_IOR('B', 1, compat_size_t)
2430#define PMU_IOC_SET_BACKLIGHT32	_IOW('B', 2, compat_size_t)
2431#define PMU_IOC_GET_MODEL32	_IOR('B', 3, compat_size_t)
2432#define PMU_IOC_HAS_ADB32	_IOR('B', 4, compat_size_t)
2433#define PMU_IOC_CAN_SLEEP32	_IOR('B', 5, compat_size_t)
2434#define PMU_IOC_GRAB_BACKLIGHT32 _IOR('B', 6, compat_size_t)
2435
2436static long compat_pmu_ioctl (struct file *filp, u_int cmd, u_long arg)
2437{
2438	switch (cmd) {
2439	case PMU_IOC_SLEEP:
2440		break;
2441	case PMU_IOC_GET_BACKLIGHT32:
2442		cmd = PMU_IOC_GET_BACKLIGHT;
2443		break;
2444	case PMU_IOC_SET_BACKLIGHT32:
2445		cmd = PMU_IOC_SET_BACKLIGHT;
2446		break;
2447	case PMU_IOC_GET_MODEL32:
2448		cmd = PMU_IOC_GET_MODEL;
2449		break;
2450	case PMU_IOC_HAS_ADB32:
2451		cmd = PMU_IOC_HAS_ADB;
2452		break;
2453	case PMU_IOC_CAN_SLEEP32:
2454		cmd = PMU_IOC_CAN_SLEEP;
2455		break;
2456	case PMU_IOC_GRAB_BACKLIGHT32:
2457		cmd = PMU_IOC_GRAB_BACKLIGHT;
2458		break;
2459	default:
2460		return -ENOIOCTLCMD;
2461	}
2462	return pmu_unlocked_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
2463}
2464#endif
2465
2466static const struct file_operations pmu_device_fops = {
2467	.read		= pmu_read,
2468	.write		= pmu_write,
2469	.poll		= pmu_fpoll,
2470	.unlocked_ioctl	= pmu_unlocked_ioctl,
2471#ifdef CONFIG_COMPAT
2472	.compat_ioctl	= compat_pmu_ioctl,
2473#endif
2474	.open		= pmu_open,
2475	.release	= pmu_release,
2476	.llseek		= noop_llseek,
2477};
2478
2479static struct miscdevice pmu_device = {
2480	PMU_MINOR, "pmu", &pmu_device_fops
2481};
2482
2483static int pmu_device_init(void)
2484{
2485	if (pmu_state == uninitialized)
2486		return 0;
2487	if (misc_register(&pmu_device) < 0)
2488		printk(KERN_ERR "via-pmu: cannot register misc device.\n");
2489	return 0;
2490}
2491device_initcall(pmu_device_init);
2492
2493
2494#ifdef DEBUG_SLEEP
2495static inline void 
2496polled_handshake(void)
2497{
2498	via2[B] &= ~TREQ; eieio();
2499	while ((via2[B] & TACK) != 0)
2500		;
2501	via2[B] |= TREQ; eieio();
2502	while ((via2[B] & TACK) == 0)
2503		;
2504}
2505
2506static inline void 
2507polled_send_byte(int x)
2508{
2509	via1[ACR] |= SR_OUT | SR_EXT; eieio();
2510	via1[SR] = x; eieio();
2511	polled_handshake();
2512}
2513
2514static inline int
2515polled_recv_byte(void)
2516{
2517	int x;
2518
2519	via1[ACR] = (via1[ACR] & ~SR_OUT) | SR_EXT; eieio();
2520	x = via1[SR]; eieio();
2521	polled_handshake();
2522	x = via1[SR]; eieio();
2523	return x;
2524}
2525
2526int
2527pmu_polled_request(struct adb_request *req)
2528{
2529	unsigned long flags;
2530	int i, l, c;
2531
2532	req->complete = 1;
2533	c = req->data[0];
2534	l = pmu_data_len[c][0];
2535	if (l >= 0 && req->nbytes != l + 1)
2536		return -EINVAL;
2537
2538	local_irq_save(flags);
2539	while (pmu_state != idle)
2540		pmu_poll();
2541
2542	while ((via2[B] & TACK) == 0)
2543		;
2544	polled_send_byte(c);
2545	if (l < 0) {
2546		l = req->nbytes - 1;
2547		polled_send_byte(l);
2548	}
2549	for (i = 1; i <= l; ++i)
2550		polled_send_byte(req->data[i]);
2551
2552	l = pmu_data_len[c][1];
2553	if (l < 0)
2554		l = polled_recv_byte();
2555	for (i = 0; i < l; ++i)
2556		req->reply[i + req->reply_len] = polled_recv_byte();
2557
2558	if (req->done)
2559		(*req->done)(req);
2560
2561	local_irq_restore(flags);
2562	return 0;
2563}
2564
2565/* N.B. This doesn't work on the 3400 */
2566void pmu_blink(int n)
2567{
2568	struct adb_request req;
2569
2570	memset(&req, 0, sizeof(req));
2571
2572	for (; n > 0; --n) {
2573		req.nbytes = 4;
2574		req.done = NULL;
2575		req.data[0] = 0xee;
2576		req.data[1] = 4;
2577		req.data[2] = 0;
2578		req.data[3] = 1;
2579		req.reply[0] = ADB_RET_OK;
2580		req.reply_len = 1;
2581		req.reply_expected = 0;
2582		pmu_polled_request(&req);
2583		mdelay(50);
2584		req.nbytes = 4;
2585		req.done = NULL;
2586		req.data[0] = 0xee;
2587		req.data[1] = 4;
2588		req.data[2] = 0;
2589		req.data[3] = 0;
2590		req.reply[0] = ADB_RET_OK;
2591		req.reply_len = 1;
2592		req.reply_expected = 0;
2593		pmu_polled_request(&req);
2594		mdelay(50);
2595	}
2596	mdelay(50);
2597}
2598#endif /* DEBUG_SLEEP */
2599
2600#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2601int pmu_sys_suspended;
2602
2603static int pmu_syscore_suspend(void)
2604{
2605	/* Suspend PMU event interrupts */
2606	pmu_suspend();
2607	pmu_sys_suspended = 1;
2608
2609#ifdef CONFIG_PMAC_BACKLIGHT
2610	/* Tell backlight code not to muck around with the chip anymore */
2611	pmu_backlight_set_sleep(1);
2612#endif
2613
2614	return 0;
2615}
2616
2617static void pmu_syscore_resume(void)
2618{
2619	struct adb_request req;
2620
2621	if (!pmu_sys_suspended)
2622		return;
2623
2624	/* Tell PMU we are ready */
2625	pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
2626	pmu_wait_complete(&req);
2627
2628#ifdef CONFIG_PMAC_BACKLIGHT
2629	/* Tell backlight code it can use the chip again */
2630	pmu_backlight_set_sleep(0);
2631#endif
2632	/* Resume PMU event interrupts */
2633	pmu_resume();
2634	pmu_sys_suspended = 0;
2635}
2636
2637static struct syscore_ops pmu_syscore_ops = {
2638	.suspend = pmu_syscore_suspend,
2639	.resume = pmu_syscore_resume,
2640};
2641
2642static int pmu_syscore_register(void)
2643{
2644	register_syscore_ops(&pmu_syscore_ops);
2645
2646	return 0;
2647}
2648subsys_initcall(pmu_syscore_register);
2649#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2650
2651EXPORT_SYMBOL(pmu_request);
2652EXPORT_SYMBOL(pmu_queue_request);
2653EXPORT_SYMBOL(pmu_poll);
2654EXPORT_SYMBOL(pmu_poll_adb);
2655EXPORT_SYMBOL(pmu_wait_complete);
2656EXPORT_SYMBOL(pmu_suspend);
2657EXPORT_SYMBOL(pmu_resume);
2658EXPORT_SYMBOL(pmu_unlock);
2659#if defined(CONFIG_PPC32)
2660EXPORT_SYMBOL(pmu_enable_irled);
2661EXPORT_SYMBOL(pmu_battery_count);
2662EXPORT_SYMBOL(pmu_batteries);
2663EXPORT_SYMBOL(pmu_power_flags);
2664#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2665