Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
4 *
5 * Parts of this file were based on sources as follows:
6 *
7 * Copyright (c) 2006-2008 Intel Corporation
8 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
9 * Copyright (C) 2011 Texas Instruments
10 */
11
12/**
13 * DOC: ARM PrimeCell PL110 and PL111 CLCD Driver
14 *
15 * The PL110/PL111 is a simple LCD controller that can support TFT
16 * and STN displays. This driver exposes a standard KMS interface
17 * for them.
18 *
19 * The driver currently doesn't expose the cursor. The DRM API for
20 * cursors requires support for 64x64 ARGB8888 cursor images, while
21 * the hardware can only support 64x64 monochrome with masking
22 * cursors. While one could imagine trying to hack something together
23 * to look at the ARGB8888 and program reasonable in monochrome, we
24 * just don't expose the cursor at all instead, and leave cursor
25 * support to the application software cursor layer.
26 *
27 * TODO:
28 *
29 * - Fix race between setting plane base address and getting IRQ for
30 * vsync firing the pageflip completion.
31 *
32 * - Read back hardware state at boot to skip reprogramming the
33 * hardware when doing a no-op modeset.
34 *
35 * - Use the CLKSEL bit to support switching between the two external
36 * clock parents.
37 */
38
39#include <linux/amba/bus.h>
40#include <linux/dma-buf.h>
41#include <linux/module.h>
42#include <linux/of.h>
43#include <linux/of_graph.h>
44#include <linux/of_reserved_mem.h>
45#include <linux/shmem_fs.h>
46#include <linux/slab.h>
47
48#include <drm/drm_atomic_helper.h>
49#include <drm/drm_bridge.h>
50#include <drm/drm_client_setup.h>
51#include <drm/drm_drv.h>
52#include <drm/drm_fbdev_dma.h>
53#include <drm/drm_fourcc.h>
54#include <drm/drm_gem_dma_helper.h>
55#include <drm/drm_gem_framebuffer_helper.h>
56#include <drm/drm_of.h>
57#include <drm/drm_panel.h>
58#include <drm/drm_probe_helper.h>
59#include <drm/drm_vblank.h>
60
61#include "pl111_drm.h"
62#include "pl111_versatile.h"
63#include "pl111_nomadik.h"
64
65#define DRIVER_DESC "DRM module for PL111"
66
67static const struct drm_mode_config_funcs mode_config_funcs = {
68 .fb_create = drm_gem_fb_create,
69 .atomic_check = drm_atomic_helper_check,
70 .atomic_commit = drm_atomic_helper_commit,
71};
72
73static int pl111_modeset_init(struct drm_device *dev)
74{
75 struct drm_mode_config *mode_config;
76 struct pl111_drm_dev_private *priv = dev->dev_private;
77 struct device_node *np = dev->dev->of_node;
78 struct device_node *remote;
79 struct drm_panel *panel = NULL;
80 struct drm_bridge *bridge = NULL;
81 bool defer = false;
82 int ret;
83 int i;
84
85 ret = drmm_mode_config_init(dev);
86 if (ret)
87 return ret;
88
89 mode_config = &dev->mode_config;
90 mode_config->funcs = &mode_config_funcs;
91 mode_config->min_width = 1;
92 mode_config->max_width = 1024;
93 mode_config->min_height = 1;
94 mode_config->max_height = 768;
95
96 i = 0;
97 for_each_endpoint_of_node(np, remote) {
98 struct drm_panel *tmp_panel;
99 struct drm_bridge *tmp_bridge;
100
101 dev_dbg(dev->dev, "checking endpoint %d\n", i);
102
103 ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
104 0, i,
105 &tmp_panel,
106 &tmp_bridge);
107 if (ret) {
108 if (ret == -EPROBE_DEFER) {
109 /*
110 * Something deferred, but that is often just
111 * another way of saying -ENODEV, but let's
112 * cast a vote for later deferral.
113 */
114 defer = true;
115 } else if (ret != -ENODEV) {
116 /* Continue, maybe something else is working */
117 dev_err(dev->dev,
118 "endpoint %d returns %d\n", i, ret);
119 }
120 }
121
122 if (tmp_panel) {
123 dev_info(dev->dev,
124 "found panel on endpoint %d\n", i);
125 panel = tmp_panel;
126 }
127 if (tmp_bridge) {
128 dev_info(dev->dev,
129 "found bridge on endpoint %d\n", i);
130 bridge = tmp_bridge;
131 }
132
133 i++;
134 }
135
136 /*
137 * If we can't find neither panel nor bridge on any of the
138 * endpoints, and any of them retured -EPROBE_DEFER, then
139 * let's defer this driver too.
140 */
141 if ((!panel && !bridge) && defer)
142 return -EPROBE_DEFER;
143
144 if (panel) {
145 bridge = drm_panel_bridge_add_typed(panel,
146 DRM_MODE_CONNECTOR_Unknown);
147 if (IS_ERR(bridge)) {
148 ret = PTR_ERR(bridge);
149 goto finish;
150 }
151 } else if (bridge) {
152 dev_info(dev->dev, "Using non-panel bridge\n");
153 } else {
154 dev_err(dev->dev, "No bridge, exiting\n");
155 return -ENODEV;
156 }
157
158 priv->bridge = bridge;
159 if (panel) {
160 priv->panel = panel;
161 priv->connector = drm_panel_bridge_connector(bridge);
162 }
163
164 ret = pl111_display_init(dev);
165 if (ret != 0) {
166 dev_err(dev->dev, "Failed to init display\n");
167 goto out_bridge;
168 }
169
170 ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
171 bridge);
172 if (ret)
173 return ret;
174
175 if (!priv->variant->broken_vblank) {
176 ret = drm_vblank_init(dev, 1);
177 if (ret != 0) {
178 dev_err(dev->dev, "Failed to init vblank\n");
179 goto out_bridge;
180 }
181 }
182
183 drm_mode_config_reset(dev);
184
185 drm_kms_helper_poll_init(dev);
186
187 goto finish;
188
189out_bridge:
190 if (panel)
191 drm_panel_bridge_remove(bridge);
192finish:
193 return ret;
194}
195
196static struct drm_gem_object *
197pl111_gem_import_sg_table(struct drm_device *dev,
198 struct dma_buf_attachment *attach,
199 struct sg_table *sgt)
200{
201 struct pl111_drm_dev_private *priv = dev->dev_private;
202
203 /*
204 * When using device-specific reserved memory we can't import
205 * DMA buffers: those are passed by reference in any global
206 * memory and we can only handle a specific range of memory.
207 */
208 if (priv->use_device_memory)
209 return ERR_PTR(-EINVAL);
210
211 return drm_gem_dma_prime_import_sg_table(dev, attach, sgt);
212}
213
214DEFINE_DRM_GEM_DMA_FOPS(drm_fops);
215
216static const struct drm_driver pl111_drm_driver = {
217 .driver_features =
218 DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
219 .ioctls = NULL,
220 .fops = &drm_fops,
221 .name = "pl111",
222 .desc = DRIVER_DESC,
223 .date = "20170317",
224 .major = 1,
225 .minor = 0,
226 .patchlevel = 0,
227 .dumb_create = drm_gem_dma_dumb_create,
228 .gem_prime_import_sg_table = pl111_gem_import_sg_table,
229 DRM_FBDEV_DMA_DRIVER_OPS,
230
231#if defined(CONFIG_DEBUG_FS)
232 .debugfs_init = pl111_debugfs_init,
233#endif
234};
235
236static int pl111_amba_probe(struct amba_device *amba_dev,
237 const struct amba_id *id)
238{
239 struct device *dev = &amba_dev->dev;
240 struct pl111_drm_dev_private *priv;
241 const struct pl111_variant_data *variant = id->data;
242 struct drm_device *drm;
243 int ret;
244
245 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
246 if (!priv)
247 return -ENOMEM;
248
249 drm = drm_dev_alloc(&pl111_drm_driver, dev);
250 if (IS_ERR(drm))
251 return PTR_ERR(drm);
252 amba_set_drvdata(amba_dev, drm);
253 priv->drm = drm;
254 drm->dev_private = priv;
255 priv->variant = variant;
256
257 ret = of_reserved_mem_device_init(dev);
258 if (!ret) {
259 dev_info(dev, "using device-specific reserved memory\n");
260 priv->use_device_memory = true;
261 }
262
263 if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
264 &priv->memory_bw)) {
265 dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
266 priv->memory_bw = 0;
267 }
268
269 /* The two main variants swap this register */
270 if (variant->is_pl110 || variant->is_lcdc) {
271 priv->ienb = CLCD_PL110_IENB;
272 priv->ctrl = CLCD_PL110_CNTL;
273 } else {
274 priv->ienb = CLCD_PL111_IENB;
275 priv->ctrl = CLCD_PL111_CNTL;
276 }
277
278 priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
279 if (IS_ERR(priv->regs)) {
280 dev_err(dev, "%s failed mmio\n", __func__);
281 ret = PTR_ERR(priv->regs);
282 goto dev_put;
283 }
284
285 /* This may override some variant settings */
286 ret = pl111_versatile_init(dev, priv);
287 if (ret)
288 goto dev_put;
289
290 pl111_nomadik_init(dev);
291
292 /* turn off interrupts before requesting the irq */
293 writel(0, priv->regs + priv->ienb);
294
295 ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0,
296 variant->name, priv);
297 if (ret != 0) {
298 dev_err(dev, "%s failed irq %d\n", __func__, ret);
299 return ret;
300 }
301
302 ret = pl111_modeset_init(drm);
303 if (ret != 0)
304 goto dev_put;
305
306 ret = drm_dev_register(drm, 0);
307 if (ret < 0)
308 goto dev_put;
309
310 drm_client_setup_with_color_mode(drm, priv->variant->fb_depth);
311
312 return 0;
313
314dev_put:
315 drm_dev_put(drm);
316 of_reserved_mem_device_release(dev);
317
318 return ret;
319}
320
321static void pl111_amba_remove(struct amba_device *amba_dev)
322{
323 struct device *dev = &amba_dev->dev;
324 struct drm_device *drm = amba_get_drvdata(amba_dev);
325 struct pl111_drm_dev_private *priv = drm->dev_private;
326
327 drm_dev_unregister(drm);
328 drm_atomic_helper_shutdown(drm);
329 if (priv->panel)
330 drm_panel_bridge_remove(priv->bridge);
331 drm_dev_put(drm);
332 of_reserved_mem_device_release(dev);
333}
334
335static void pl111_amba_shutdown(struct amba_device *amba_dev)
336{
337 drm_atomic_helper_shutdown(amba_get_drvdata(amba_dev));
338}
339
340/*
341 * This early variant lacks the 565 and 444 pixel formats.
342 */
343static const u32 pl110_pixel_formats[] = {
344 DRM_FORMAT_ABGR8888,
345 DRM_FORMAT_XBGR8888,
346 DRM_FORMAT_ARGB8888,
347 DRM_FORMAT_XRGB8888,
348 DRM_FORMAT_ABGR1555,
349 DRM_FORMAT_XBGR1555,
350 DRM_FORMAT_ARGB1555,
351 DRM_FORMAT_XRGB1555,
352};
353
354static const struct pl111_variant_data pl110_variant = {
355 .name = "PL110",
356 .is_pl110 = true,
357 .formats = pl110_pixel_formats,
358 .nformats = ARRAY_SIZE(pl110_pixel_formats),
359 .fb_depth = 16,
360};
361
362/* RealView, Versatile Express etc use this modern variant */
363static const u32 pl111_pixel_formats[] = {
364 DRM_FORMAT_ABGR8888,
365 DRM_FORMAT_XBGR8888,
366 DRM_FORMAT_ARGB8888,
367 DRM_FORMAT_XRGB8888,
368 DRM_FORMAT_BGR565,
369 DRM_FORMAT_RGB565,
370 DRM_FORMAT_ABGR1555,
371 DRM_FORMAT_XBGR1555,
372 DRM_FORMAT_ARGB1555,
373 DRM_FORMAT_XRGB1555,
374 DRM_FORMAT_ABGR4444,
375 DRM_FORMAT_XBGR4444,
376 DRM_FORMAT_ARGB4444,
377 DRM_FORMAT_XRGB4444,
378};
379
380static const struct pl111_variant_data pl111_variant = {
381 .name = "PL111",
382 .formats = pl111_pixel_formats,
383 .nformats = ARRAY_SIZE(pl111_pixel_formats),
384 .fb_depth = 32,
385};
386
387static const u32 pl110_nomadik_pixel_formats[] = {
388 DRM_FORMAT_RGB888,
389 DRM_FORMAT_BGR888,
390 DRM_FORMAT_ABGR8888,
391 DRM_FORMAT_XBGR8888,
392 DRM_FORMAT_ARGB8888,
393 DRM_FORMAT_XRGB8888,
394 DRM_FORMAT_BGR565,
395 DRM_FORMAT_RGB565,
396 DRM_FORMAT_ABGR1555,
397 DRM_FORMAT_XBGR1555,
398 DRM_FORMAT_ARGB1555,
399 DRM_FORMAT_XRGB1555,
400 DRM_FORMAT_ABGR4444,
401 DRM_FORMAT_XBGR4444,
402 DRM_FORMAT_ARGB4444,
403 DRM_FORMAT_XRGB4444,
404};
405
406static const struct pl111_variant_data pl110_nomadik_variant = {
407 .name = "LCDC (PL110 Nomadik)",
408 .formats = pl110_nomadik_pixel_formats,
409 .nformats = ARRAY_SIZE(pl110_nomadik_pixel_formats),
410 .is_lcdc = true,
411 .st_bitmux_control = true,
412 .broken_vblank = true,
413 .fb_depth = 16,
414};
415
416static const struct amba_id pl111_id_table[] = {
417 {
418 .id = 0x00041110,
419 .mask = 0x000fffff,
420 .data = (void *)&pl110_variant,
421 },
422 {
423 .id = 0x00180110,
424 .mask = 0x00fffffe,
425 .data = (void *)&pl110_nomadik_variant,
426 },
427 {
428 .id = 0x00041111,
429 .mask = 0x000fffff,
430 .data = (void *)&pl111_variant,
431 },
432 {0, 0},
433};
434MODULE_DEVICE_TABLE(amba, pl111_id_table);
435
436static struct amba_driver pl111_amba_driver __maybe_unused = {
437 .drv = {
438 .name = "drm-clcd-pl111",
439 },
440 .probe = pl111_amba_probe,
441 .remove = pl111_amba_remove,
442 .shutdown = pl111_amba_shutdown,
443 .id_table = pl111_id_table,
444};
445
446#ifdef CONFIG_ARM_AMBA
447module_amba_driver(pl111_amba_driver);
448#endif
449
450MODULE_DESCRIPTION(DRIVER_DESC);
451MODULE_AUTHOR("ARM Ltd.");
452MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
4 *
5 * Parts of this file were based on sources as follows:
6 *
7 * Copyright (c) 2006-2008 Intel Corporation
8 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
9 * Copyright (C) 2011 Texas Instruments
10 */
11
12/**
13 * DOC: ARM PrimeCell PL111 CLCD Driver
14 *
15 * The PL111 is a simple LCD controller that can support TFT and STN
16 * displays. This driver exposes a standard KMS interface for them.
17 *
18 * This driver uses the same Device Tree binding as the fbdev CLCD
19 * driver. While the fbdev driver supports panels that may be
20 * connected to the CLCD internally to the CLCD driver, in DRM the
21 * panels get split out to drivers/gpu/drm/panels/. This means that,
22 * in converting from using fbdev to using DRM, you also need to write
23 * a panel driver (which may be as simple as an entry in
24 * panel-simple.c).
25 *
26 * The driver currently doesn't expose the cursor. The DRM API for
27 * cursors requires support for 64x64 ARGB8888 cursor images, while
28 * the hardware can only support 64x64 monochrome with masking
29 * cursors. While one could imagine trying to hack something together
30 * to look at the ARGB8888 and program reasonable in monochrome, we
31 * just don't expose the cursor at all instead, and leave cursor
32 * support to the X11 software cursor layer.
33 *
34 * TODO:
35 *
36 * - Fix race between setting plane base address and getting IRQ for
37 * vsync firing the pageflip completion.
38 *
39 * - Use the "max-memory-bandwidth" DT property to filter the
40 * supported formats.
41 *
42 * - Read back hardware state at boot to skip reprogramming the
43 * hardware when doing a no-op modeset.
44 *
45 * - Use the CLKSEL bit to support switching between the two external
46 * clock parents.
47 */
48
49#include <linux/amba/bus.h>
50#include <linux/amba/clcd-regs.h>
51#include <linux/dma-buf.h>
52#include <linux/module.h>
53#include <linux/of.h>
54#include <linux/of_graph.h>
55#include <linux/of_reserved_mem.h>
56#include <linux/shmem_fs.h>
57#include <linux/slab.h>
58#include <linux/version.h>
59
60#include <drm/drm_atomic_helper.h>
61#include <drm/drm_bridge.h>
62#include <drm/drm_drv.h>
63#include <drm/drm_fb_cma_helper.h>
64#include <drm/drm_fb_helper.h>
65#include <drm/drm_gem_cma_helper.h>
66#include <drm/drm_gem_framebuffer_helper.h>
67#include <drm/drm_of.h>
68#include <drm/drm_panel.h>
69#include <drm/drm_probe_helper.h>
70#include <drm/drm_vblank.h>
71
72#include "pl111_drm.h"
73#include "pl111_versatile.h"
74#include "pl111_nomadik.h"
75
76#define DRIVER_DESC "DRM module for PL111"
77
78static const struct drm_mode_config_funcs mode_config_funcs = {
79 .fb_create = drm_gem_fb_create,
80 .atomic_check = drm_atomic_helper_check,
81 .atomic_commit = drm_atomic_helper_commit,
82};
83
84static int pl111_modeset_init(struct drm_device *dev)
85{
86 struct drm_mode_config *mode_config;
87 struct pl111_drm_dev_private *priv = dev->dev_private;
88 struct device_node *np = dev->dev->of_node;
89 struct device_node *remote;
90 struct drm_panel *panel = NULL;
91 struct drm_bridge *bridge = NULL;
92 bool defer = false;
93 int ret = 0;
94 int i;
95
96 drm_mode_config_init(dev);
97 mode_config = &dev->mode_config;
98 mode_config->funcs = &mode_config_funcs;
99 mode_config->min_width = 1;
100 mode_config->max_width = 1024;
101 mode_config->min_height = 1;
102 mode_config->max_height = 768;
103
104 i = 0;
105 for_each_endpoint_of_node(np, remote) {
106 struct drm_panel *tmp_panel;
107 struct drm_bridge *tmp_bridge;
108
109 dev_dbg(dev->dev, "checking endpoint %d\n", i);
110
111 ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
112 0, i,
113 &tmp_panel,
114 &tmp_bridge);
115 if (ret) {
116 if (ret == -EPROBE_DEFER) {
117 /*
118 * Something deferred, but that is often just
119 * another way of saying -ENODEV, but let's
120 * cast a vote for later deferral.
121 */
122 defer = true;
123 } else if (ret != -ENODEV) {
124 /* Continue, maybe something else is working */
125 dev_err(dev->dev,
126 "endpoint %d returns %d\n", i, ret);
127 }
128 }
129
130 if (tmp_panel) {
131 dev_info(dev->dev,
132 "found panel on endpoint %d\n", i);
133 panel = tmp_panel;
134 }
135 if (tmp_bridge) {
136 dev_info(dev->dev,
137 "found bridge on endpoint %d\n", i);
138 bridge = tmp_bridge;
139 }
140
141 i++;
142 }
143
144 /*
145 * If we can't find neither panel nor bridge on any of the
146 * endpoints, and any of them retured -EPROBE_DEFER, then
147 * let's defer this driver too.
148 */
149 if ((!panel && !bridge) && defer)
150 return -EPROBE_DEFER;
151
152 if (panel) {
153 bridge = drm_panel_bridge_add(panel,
154 DRM_MODE_CONNECTOR_Unknown);
155 if (IS_ERR(bridge)) {
156 ret = PTR_ERR(bridge);
157 goto out_config;
158 }
159 } else if (bridge) {
160 dev_info(dev->dev, "Using non-panel bridge\n");
161 } else {
162 dev_err(dev->dev, "No bridge, exiting\n");
163 return -ENODEV;
164 }
165
166 priv->bridge = bridge;
167 if (panel) {
168 priv->panel = panel;
169 priv->connector = panel->connector;
170 }
171
172 ret = pl111_display_init(dev);
173 if (ret != 0) {
174 dev_err(dev->dev, "Failed to init display\n");
175 goto out_bridge;
176 }
177
178 ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
179 bridge);
180 if (ret)
181 return ret;
182
183 if (!priv->variant->broken_vblank) {
184 ret = drm_vblank_init(dev, 1);
185 if (ret != 0) {
186 dev_err(dev->dev, "Failed to init vblank\n");
187 goto out_bridge;
188 }
189 }
190
191 drm_mode_config_reset(dev);
192
193 drm_kms_helper_poll_init(dev);
194
195 goto finish;
196
197out_bridge:
198 if (panel)
199 drm_panel_bridge_remove(bridge);
200out_config:
201 drm_mode_config_cleanup(dev);
202finish:
203 return ret;
204}
205
206static struct drm_gem_object *
207pl111_gem_import_sg_table(struct drm_device *dev,
208 struct dma_buf_attachment *attach,
209 struct sg_table *sgt)
210{
211 struct pl111_drm_dev_private *priv = dev->dev_private;
212
213 /*
214 * When using device-specific reserved memory we can't import
215 * DMA buffers: those are passed by reference in any global
216 * memory and we can only handle a specific range of memory.
217 */
218 if (priv->use_device_memory)
219 return ERR_PTR(-EINVAL);
220
221 return drm_gem_cma_prime_import_sg_table(dev, attach, sgt);
222}
223
224DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
225
226static struct drm_driver pl111_drm_driver = {
227 .driver_features =
228 DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
229 .ioctls = NULL,
230 .fops = &drm_fops,
231 .name = "pl111",
232 .desc = DRIVER_DESC,
233 .date = "20170317",
234 .major = 1,
235 .minor = 0,
236 .patchlevel = 0,
237 .dumb_create = drm_gem_cma_dumb_create,
238 .gem_free_object_unlocked = drm_gem_cma_free_object,
239 .gem_vm_ops = &drm_gem_cma_vm_ops,
240 .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
241 .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
242 .gem_prime_import_sg_table = pl111_gem_import_sg_table,
243 .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
244 .gem_prime_mmap = drm_gem_cma_prime_mmap,
245 .gem_prime_vmap = drm_gem_cma_prime_vmap,
246
247#if defined(CONFIG_DEBUG_FS)
248 .debugfs_init = pl111_debugfs_init,
249#endif
250};
251
252static int pl111_amba_probe(struct amba_device *amba_dev,
253 const struct amba_id *id)
254{
255 struct device *dev = &amba_dev->dev;
256 struct pl111_drm_dev_private *priv;
257 const struct pl111_variant_data *variant = id->data;
258 struct drm_device *drm;
259 int ret;
260
261 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
262 if (!priv)
263 return -ENOMEM;
264
265 drm = drm_dev_alloc(&pl111_drm_driver, dev);
266 if (IS_ERR(drm))
267 return PTR_ERR(drm);
268 amba_set_drvdata(amba_dev, drm);
269 priv->drm = drm;
270 drm->dev_private = priv;
271 priv->variant = variant;
272
273 ret = of_reserved_mem_device_init(dev);
274 if (!ret) {
275 dev_info(dev, "using device-specific reserved memory\n");
276 priv->use_device_memory = true;
277 }
278
279 if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
280 &priv->memory_bw)) {
281 dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
282 priv->memory_bw = 0;
283 }
284
285 /* The two main variants swap this register */
286 if (variant->is_pl110 || variant->is_lcdc) {
287 priv->ienb = CLCD_PL110_IENB;
288 priv->ctrl = CLCD_PL110_CNTL;
289 } else {
290 priv->ienb = CLCD_PL111_IENB;
291 priv->ctrl = CLCD_PL111_CNTL;
292 }
293
294 priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
295 if (IS_ERR(priv->regs)) {
296 dev_err(dev, "%s failed mmio\n", __func__);
297 ret = PTR_ERR(priv->regs);
298 goto dev_put;
299 }
300
301 /* This may override some variant settings */
302 ret = pl111_versatile_init(dev, priv);
303 if (ret)
304 goto dev_put;
305
306 pl111_nomadik_init(dev);
307
308 /* turn off interrupts before requesting the irq */
309 writel(0, priv->regs + priv->ienb);
310
311 ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0,
312 variant->name, priv);
313 if (ret != 0) {
314 dev_err(dev, "%s failed irq %d\n", __func__, ret);
315 return ret;
316 }
317
318 ret = pl111_modeset_init(drm);
319 if (ret != 0)
320 goto dev_put;
321
322 ret = drm_dev_register(drm, 0);
323 if (ret < 0)
324 goto dev_put;
325
326 drm_fbdev_generic_setup(drm, priv->variant->fb_bpp);
327
328 return 0;
329
330dev_put:
331 drm_dev_put(drm);
332 of_reserved_mem_device_release(dev);
333
334 return ret;
335}
336
337static int pl111_amba_remove(struct amba_device *amba_dev)
338{
339 struct device *dev = &amba_dev->dev;
340 struct drm_device *drm = amba_get_drvdata(amba_dev);
341 struct pl111_drm_dev_private *priv = drm->dev_private;
342
343 drm_dev_unregister(drm);
344 if (priv->panel)
345 drm_panel_bridge_remove(priv->bridge);
346 drm_mode_config_cleanup(drm);
347 drm_dev_put(drm);
348 of_reserved_mem_device_release(dev);
349
350 return 0;
351}
352
353/*
354 * This early variant lacks the 565 and 444 pixel formats.
355 */
356static const u32 pl110_pixel_formats[] = {
357 DRM_FORMAT_ABGR8888,
358 DRM_FORMAT_XBGR8888,
359 DRM_FORMAT_ARGB8888,
360 DRM_FORMAT_XRGB8888,
361 DRM_FORMAT_ABGR1555,
362 DRM_FORMAT_XBGR1555,
363 DRM_FORMAT_ARGB1555,
364 DRM_FORMAT_XRGB1555,
365};
366
367static const struct pl111_variant_data pl110_variant = {
368 .name = "PL110",
369 .is_pl110 = true,
370 .formats = pl110_pixel_formats,
371 .nformats = ARRAY_SIZE(pl110_pixel_formats),
372 .fb_bpp = 16,
373};
374
375/* RealView, Versatile Express etc use this modern variant */
376static const u32 pl111_pixel_formats[] = {
377 DRM_FORMAT_ABGR8888,
378 DRM_FORMAT_XBGR8888,
379 DRM_FORMAT_ARGB8888,
380 DRM_FORMAT_XRGB8888,
381 DRM_FORMAT_BGR565,
382 DRM_FORMAT_RGB565,
383 DRM_FORMAT_ABGR1555,
384 DRM_FORMAT_XBGR1555,
385 DRM_FORMAT_ARGB1555,
386 DRM_FORMAT_XRGB1555,
387 DRM_FORMAT_ABGR4444,
388 DRM_FORMAT_XBGR4444,
389 DRM_FORMAT_ARGB4444,
390 DRM_FORMAT_XRGB4444,
391};
392
393static const struct pl111_variant_data pl111_variant = {
394 .name = "PL111",
395 .formats = pl111_pixel_formats,
396 .nformats = ARRAY_SIZE(pl111_pixel_formats),
397 .fb_bpp = 32,
398};
399
400static const u32 pl110_nomadik_pixel_formats[] = {
401 DRM_FORMAT_RGB888,
402 DRM_FORMAT_BGR888,
403 DRM_FORMAT_ABGR8888,
404 DRM_FORMAT_XBGR8888,
405 DRM_FORMAT_ARGB8888,
406 DRM_FORMAT_XRGB8888,
407 DRM_FORMAT_BGR565,
408 DRM_FORMAT_RGB565,
409 DRM_FORMAT_ABGR1555,
410 DRM_FORMAT_XBGR1555,
411 DRM_FORMAT_ARGB1555,
412 DRM_FORMAT_XRGB1555,
413 DRM_FORMAT_ABGR4444,
414 DRM_FORMAT_XBGR4444,
415 DRM_FORMAT_ARGB4444,
416 DRM_FORMAT_XRGB4444,
417};
418
419static const struct pl111_variant_data pl110_nomadik_variant = {
420 .name = "LCDC (PL110 Nomadik)",
421 .formats = pl110_nomadik_pixel_formats,
422 .nformats = ARRAY_SIZE(pl110_nomadik_pixel_formats),
423 .is_lcdc = true,
424 .st_bitmux_control = true,
425 .broken_vblank = true,
426 .fb_bpp = 16,
427};
428
429static const struct amba_id pl111_id_table[] = {
430 {
431 .id = 0x00041110,
432 .mask = 0x000fffff,
433 .data = (void *)&pl110_variant,
434 },
435 {
436 .id = 0x00180110,
437 .mask = 0x00fffffe,
438 .data = (void *)&pl110_nomadik_variant,
439 },
440 {
441 .id = 0x00041111,
442 .mask = 0x000fffff,
443 .data = (void *)&pl111_variant,
444 },
445 {0, 0},
446};
447
448static struct amba_driver pl111_amba_driver __maybe_unused = {
449 .drv = {
450 .name = "drm-clcd-pl111",
451 },
452 .probe = pl111_amba_probe,
453 .remove = pl111_amba_remove,
454 .id_table = pl111_id_table,
455};
456
457#ifdef CONFIG_ARM_AMBA
458module_amba_driver(pl111_amba_driver);
459#endif
460
461MODULE_DESCRIPTION(DRIVER_DESC);
462MODULE_AUTHOR("ARM Ltd.");
463MODULE_LICENSE("GPL");