Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3 bool
4 depends on DRM
5 help
6 Panel registration and lookup framework.
7
8menu "Display Panels"
9 depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
13 depends on OF && SPI
14 select REGMAP_SPI
15 help
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
22 depends on OF
23 depends on MFD_SYSCON
24 select VIDEOMODE_HELPERS
25 help
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
35 help
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41 tristate "AUO A030JTN01"
42 depends on SPI
43 select REGMAP_SPI
44 help
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49 tristate "Boe BF060Y8M-AJ0 panel"
50 depends on OF
51 depends on DRM_MIPI_DSI
52 depends on BACKLIGHT_CLASS_DEVICE
53 help
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57 the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60 tristate "Boe Himax8279d panel"
61 depends on OF
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
64 help
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TH101MB31UIG002_28A
71 tristate "Boe TH101MB31UIG002-28A panel"
72 depends on OF
73 depends on DRM_MIPI_DSI
74 depends on BACKLIGHT_CLASS_DEVICE
75 help
76 Say Y here if you want to enable support for Boe
77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
79 interface to the host and has a built-in LED backlight.
80
81config DRM_PANEL_BOE_TV101WUM_NL6
82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
83 depends on OF
84 depends on DRM_MIPI_DSI
85 depends on BACKLIGHT_CLASS_DEVICE
86 help
87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
88 45NA WUXGA PANEL DSI Video Mode panel
89
90config DRM_PANEL_BOE_TV101WUM_LL2
91 tristate "BOE TV101WUM LL2 1200x1920 panel"
92 depends on OF
93 depends on DRM_MIPI_DSI
94 depends on BACKLIGHT_CLASS_DEVICE
95 help
96 Say Y here if you want to support for BOE TV101WUM-LL2
97 WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_EBBG_FT8719
100 tristate "EBBG FT8719 panel driver"
101 depends on OF
102 depends on DRM_MIPI_DSI
103 depends on BACKLIGHT_CLASS_DEVICE
104 help
105 Say Y here if you want to enable support for the EBBG FT8719
106 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
107 The panel has a resolution of 1080x2246. It provides a MIPI DSI
108 interface to the host.
109
110config DRM_PANEL_ELIDA_KD35T133
111 tristate "Elida KD35T133 panel driver"
112 depends on OF
113 depends on DRM_MIPI_DSI
114 depends on BACKLIGHT_CLASS_DEVICE
115 help
116 Say Y here if you want to enable support for the Elida
117 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
118 system interfaces.
119
120config DRM_PANEL_FEIXIN_K101_IM2BA02
121 tristate "Feixin K101 IM2BA02 panel"
122 depends on OF
123 depends on DRM_MIPI_DSI
124 depends on BACKLIGHT_CLASS_DEVICE
125 help
126 Say Y here if you want to enable support for the Feixin K101 IM2BA02
127 4-lane 800x1280 MIPI DSI panel.
128
129config DRM_PANEL_FEIYANG_FY07024DI26A30D
130 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
131 depends on OF
132 depends on DRM_MIPI_DSI
133 depends on BACKLIGHT_CLASS_DEVICE
134 help
135 Say Y if you want to enable support for panels based on the
136 Feiyang FY07024DI26A30-D MIPI-DSI interface.
137
138config DRM_PANEL_DSI_CM
139 tristate "Generic DSI command mode panels"
140 depends on OF
141 depends on DRM_MIPI_DSI
142 depends on BACKLIGHT_CLASS_DEVICE
143 help
144 DRM panel driver for DSI command mode panels with support for
145 embedded and external backlights.
146
147config DRM_PANEL_LVDS
148 tristate "Generic LVDS panel driver"
149 depends on OF
150 depends on BACKLIGHT_CLASS_DEVICE
151 select VIDEOMODE_HELPERS
152 help
153 This driver supports LVDS panels that don't require device-specific
154 handling of power supplies or control signals. It implements automatic
155 backlight handling if the panel is attached to a backlight controller.
156
157config DRM_PANEL_HIMAX_HX83102
158 tristate "Himax HX83102-based panels"
159 depends on OF
160 depends on DRM_MIPI_DSI
161 depends on BACKLIGHT_CLASS_DEVICE
162 help
163 Say Y if you want to enable support for panels based on the
164 Himax HX83102 controller.
165
166config DRM_PANEL_HIMAX_HX83112A
167 tristate "Himax HX83112A-based DSI panel"
168 depends on OF
169 depends on DRM_MIPI_DSI
170 depends on BACKLIGHT_CLASS_DEVICE
171 select DRM_KMS_HELPER
172 help
173 Say Y here if you want to enable support for Himax HX83112A-based
174 display panels, such as the one found in the Fairphone 4 smartphone.
175
176config DRM_PANEL_HIMAX_HX8394
177 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
178 depends on OF
179 depends on DRM_MIPI_DSI
180 depends on BACKLIGHT_CLASS_DEVICE
181 help
182 Say Y if you want to enable support for panels based on the
183 Himax HX8394 controller, such as the HannStar HSD060BHW4
184 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
185
186 If M is selected the module will be called panel-himax-hx8394.
187
188config DRM_PANEL_ILITEK_IL9322
189 tristate "Ilitek ILI9322 320x240 QVGA panels"
190 depends on OF && SPI
191 select REGMAP
192 help
193 Say Y here if you want to enable support for Ilitek IL9322
194 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
195
196config DRM_PANEL_ILITEK_ILI9341
197 tristate "Ilitek ILI9341 240x320 QVGA panels"
198 depends on SPI
199 select DRM_KMS_HELPER
200 select DRM_GEM_DMA_HELPER
201 depends on BACKLIGHT_CLASS_DEVICE
202 select DRM_MIPI_DBI
203 help
204 Say Y here if you want to enable support for Ilitek IL9341
205 QVGA (240x320) RGB panels. support serial & parallel rgb
206 interface.
207
208config DRM_PANEL_ILITEK_ILI9805
209 tristate "Ilitek ILI9805-based panels"
210 depends on OF
211 depends on DRM_MIPI_DSI
212 depends on BACKLIGHT_CLASS_DEVICE
213 help
214 Say Y if you want to enable support for panels based on the
215 Ilitek ILI9805 controller.
216
217config DRM_PANEL_ILITEK_ILI9806E
218 tristate "Ilitek ILI9806E-based panels"
219 depends on OF
220 depends on DRM_MIPI_DSI
221 depends on BACKLIGHT_CLASS_DEVICE
222 help
223 Say Y if you want to enable support for panels based on the
224 Ilitek ILI9806E controller.
225
226config DRM_PANEL_ILITEK_ILI9881C
227 tristate "Ilitek ILI9881C-based panels"
228 depends on OF
229 depends on DRM_MIPI_DSI
230 depends on BACKLIGHT_CLASS_DEVICE
231 help
232 Say Y if you want to enable support for panels based on the
233 Ilitek ILI9881c controller.
234
235config DRM_PANEL_ILITEK_ILI9882T
236 tristate "Ilitek ILI9882t-based panels"
237 depends on OF
238 depends on DRM_MIPI_DSI
239 depends on BACKLIGHT_CLASS_DEVICE
240 help
241 Say Y if you want to enable support for panels based on the
242 Ilitek ILI9882t controller.
243
244config DRM_PANEL_INNOLUX_EJ030NA
245 tristate "Innolux EJ030NA 320x480 LCD panel"
246 depends on OF && SPI
247 select REGMAP_SPI
248 help
249 Say Y here to enable support for the Innolux/Chimei EJ030NA
250 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
251 and LDK handheld gaming consoles.
252
253config DRM_PANEL_INNOLUX_P079ZCA
254 tristate "Innolux P079ZCA panel"
255 depends on OF
256 depends on DRM_MIPI_DSI
257 depends on BACKLIGHT_CLASS_DEVICE
258 help
259 Say Y here if you want to enable support for Innolux P079ZCA
260 TFT-LCD modules. The panel has a 1024x768 resolution and uses
261 24 bit RGB per pixel. It provides a MIPI DSI interface to
262 the host and has a built-in LED backlight.
263
264config DRM_PANEL_JADARD_JD9365DA_H3
265 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
266 depends on OF
267 depends on DRM_MIPI_DSI
268 depends on BACKLIGHT_CLASS_DEVICE
269 help
270 Say Y here if you want to enable support for Jadard JD9365DA-H3
271 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
272 800RGBx1280 dots at maximum.
273
274config DRM_PANEL_JDI_LPM102A188A
275 tristate "JDI LPM102A188A DSI panel"
276 depends on OF && GPIOLIB
277 depends on DRM_MIPI_DSI
278 depends on BACKLIGHT_CLASS_DEVICE
279 help
280 Say Y here if you want to enable support for JDI LPM102A188A DSI
281 command mode panel as found in Google Pixel C devices.
282 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
283 to the host.
284
285config DRM_PANEL_JDI_LT070ME05000
286 tristate "JDI LT070ME05000 WUXGA DSI panel"
287 depends on OF
288 depends on DRM_MIPI_DSI
289 depends on BACKLIGHT_CLASS_DEVICE
290 help
291 Say Y here if you want to enable support for JDI DSI video mode
292 panel as found in Google Nexus 7 (2013) devices.
293 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
294 24 bit per pixel.
295
296config DRM_PANEL_JDI_R63452
297 tristate "JDI R63452 Full HD DSI panel"
298 depends on OF
299 depends on DRM_MIPI_DSI
300 depends on BACKLIGHT_CLASS_DEVICE
301 help
302 Say Y here if you want to enable support for the JDI R63452
303 DSI command mode panel as found in Xiaomi Mi 5 Devices.
304
305config DRM_PANEL_KHADAS_TS050
306 tristate "Khadas TS050 panel"
307 depends on OF
308 depends on DRM_MIPI_DSI
309 depends on BACKLIGHT_CLASS_DEVICE
310 help
311 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
312 panel module. The panel has a 1080x1920 resolution and uses
313 24 bit RGB per pixel. It provides a MIPI DSI interface to
314 the host, a built-in LED backlight and touch controller.
315
316config DRM_PANEL_KINGDISPLAY_KD097D04
317 tristate "Kingdisplay kd097d04 panel"
318 depends on OF
319 depends on DRM_MIPI_DSI
320 depends on BACKLIGHT_CLASS_DEVICE
321 help
322 Say Y here if you want to enable support for Kingdisplay kd097d04
323 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
324 24 bit RGB per pixel. It provides a MIPI DSI interface to
325 the host and has a built-in LED backlight.
326
327config DRM_PANEL_LEADTEK_LTK050H3146W
328 tristate "Leadtek LTK050H3146W panel"
329 depends on OF
330 depends on DRM_MIPI_DSI
331 depends on BACKLIGHT_CLASS_DEVICE
332 help
333 Say Y here if you want to enable support for Leadtek LTK050H3146W
334 TFT-LCD modules. The panel has a 720x1280 resolution and uses
335 24 bit RGB per pixel. It provides a MIPI DSI interface to
336 the host and has a built-in LED backlight.
337
338config DRM_PANEL_LEADTEK_LTK500HD1829
339 tristate "Leadtek LTK500HD1829 panel"
340 depends on OF
341 depends on DRM_MIPI_DSI
342 depends on BACKLIGHT_CLASS_DEVICE
343 help
344 Say Y here if you want to enable support for Kingdisplay kd097d04
345 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
346 24 bit RGB per pixel. It provides a MIPI DSI interface to
347 the host and has a built-in LED backlight.
348
349config DRM_PANEL_LINCOLNTECH_LCD197
350 tristate "Lincoln Technologies lcd197 panel"
351 depends on OF
352 depends on DRM_MIPI_DSI
353 depends on BACKLIGHT_CLASS_DEVICE
354 help
355 Say Y here if you want to enable support for lincolntech lcd197
356 TFT-LCD modules. The panel has a 1080x1920 resolution and uses
357 24 bit RGB per pixel. It provides a MIPI DSI interface to
358 the host.
359
360config DRM_PANEL_LG_LB035Q02
361 tristate "LG LB035Q024573 RGB panel"
362 depends on GPIOLIB && OF && SPI
363 help
364 Say Y here if you want to enable support for the LB035Q02 RGB panel
365 (found on the Gumstix Overo Palo35 board). To compile this driver as
366 a module, choose M here.
367
368config DRM_PANEL_LG_LG4573
369 tristate "LG4573 RGB/SPI panel"
370 depends on OF && SPI
371 select VIDEOMODE_HELPERS
372 help
373 Say Y here if you want to enable support for LG4573 RGB panel.
374 To compile this driver as a module, choose M here.
375
376config DRM_PANEL_LG_SW43408
377 tristate "LG SW43408 panel"
378 depends on OF
379 depends on DRM_MIPI_DSI
380 depends on BACKLIGHT_CLASS_DEVICE
381 select DRM_DISPLAY_DSC_HELPER
382 select DRM_DISPLAY_HELPER
383 help
384 Say Y here if you want to enable support for LG sw43408 panel.
385 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
386 pixel. It provides a MIPI DSI interface to the host and has a
387 built-in LED backlight.
388
389config DRM_PANEL_MAGNACHIP_D53E6EA8966
390 tristate "Magnachip D53E6EA8966 DSI panel"
391 depends on OF && SPI
392 depends on DRM_MIPI_DSI
393 depends on BACKLIGHT_CLASS_DEVICE
394 select DRM_MIPI_DBI
395 help
396 DRM panel driver for the Samsung AMS495QA01 panel controlled
397 with the Magnachip D53E6EA8966 panel IC. This panel receives
398 video data via DSI but commands via 9-bit SPI using DBI.
399
400config DRM_PANEL_MANTIX_MLAF057WE51
401 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
402 depends on OF
403 depends on DRM_MIPI_DSI
404 depends on BACKLIGHT_CLASS_DEVICE
405 help
406 Say Y here if you want to enable support for the Mantix
407 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
408 has a resolution of 720x1440 pixels, a built in backlight and touch
409 controller.
410
411config DRM_PANEL_NEC_NL8048HL11
412 tristate "NEC NL8048HL11 RGB panel"
413 depends on GPIOLIB && OF && SPI
414 help
415 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
416 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
417 as a module, choose M here.
418
419config DRM_PANEL_NEWVISION_NV3051D
420 tristate "NewVision NV3051D DSI panel"
421 depends on OF
422 depends on DRM_MIPI_DSI
423 depends on BACKLIGHT_CLASS_DEVICE
424 help
425 This driver supports the NV3051D based panel found on the Anbernic
426 RG353P and RG353V.
427
428config DRM_PANEL_NEWVISION_NV3052C
429 tristate "NewVision NV3052C RGB/SPI panel"
430 depends on OF && SPI
431 depends on BACKLIGHT_CLASS_DEVICE
432 select DRM_MIPI_DBI
433 help
434 Say Y here if you want to enable support for the panels built
435 around the NewVision NV3052C display controller.
436
437config DRM_PANEL_NOVATEK_NT35510
438 tristate "Novatek NT35510 RGB panel driver"
439 depends on OF
440 depends on DRM_MIPI_DSI
441 depends on BACKLIGHT_CLASS_DEVICE
442 help
443 Say Y here if you want to enable support for the panels built
444 around the Novatek NT35510 display controller, such as some
445 Hydis panels.
446
447config DRM_PANEL_NOVATEK_NT35560
448 tristate "Novatek NT35560 DSI command mode panel"
449 depends on OF
450 depends on DRM_MIPI_DSI
451 depends on BACKLIGHT_CLASS_DEVICE
452 select VIDEOMODE_HELPERS
453 help
454 Say Y here if you want to enable the Novatek NT35560 display
455 controller. This panel supports DSI in both command and video
456 mode. This supports several panels such as Sony ACX424AKM and
457 ACX424AKP.
458
459config DRM_PANEL_NOVATEK_NT35950
460 tristate "Novatek NT35950 DSI panel"
461 depends on OF
462 depends on DRM_MIPI_DSI
463 depends on BACKLIGHT_CLASS_DEVICE
464 help
465 Say Y here if you want to enable support for the panels built
466 around the Novatek NT35950 display controller, such as some
467 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
468 mobile phones.
469
470config DRM_PANEL_NOVATEK_NT36523
471 tristate "Novatek NT36523 panel driver"
472 depends on OF
473 depends on DRM_MIPI_DSI
474 depends on BACKLIGHT_CLASS_DEVICE
475 help
476 Say Y here if you want to enable support for the panels built
477 around the Novatek NT36523 display controller, such as some
478 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
479
480config DRM_PANEL_NOVATEK_NT36672A
481 tristate "Novatek NT36672A DSI panel"
482 depends on OF
483 depends on DRM_MIPI_DSI
484 depends on BACKLIGHT_CLASS_DEVICE
485 help
486 Say Y here if you want to enable support for the panels built
487 around the Novatek NT36672A display controller, such as some
488 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
489
490config DRM_PANEL_NOVATEK_NT36672E
491 tristate "Novatek NT36672E DSI panel"
492 depends on OF
493 depends on DRM_MIPI_DSI
494 depends on BACKLIGHT_CLASS_DEVICE
495 help
496 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
497 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
498 RGB per pixel.
499
500config DRM_PANEL_NOVATEK_NT39016
501 tristate "Novatek NT39016 RGB/SPI panel"
502 depends on OF && SPI
503 depends on BACKLIGHT_CLASS_DEVICE
504 select REGMAP_SPI
505 help
506 Say Y here if you want to enable support for the panels built
507 around the Novatek NT39016 display controller.
508
509config DRM_PANEL_OLIMEX_LCD_OLINUXINO
510 tristate "Olimex LCD-OLinuXino panel"
511 depends on OF
512 depends on I2C
513 depends on BACKLIGHT_CLASS_DEVICE
514 select CRC32
515 help
516 The panel is used with different sizes LCDs, from 480x272 to
517 1280x800, and 24 bit per pixel.
518
519 Say Y here if you want to enable support for Olimex Ltd.
520 LCD-OLinuXino panel.
521
522config DRM_PANEL_ORISETECH_OTA5601A
523 tristate "Orise Technology ota5601a RGB/SPI panel"
524 depends on SPI
525 depends on BACKLIGHT_CLASS_DEVICE
526 select REGMAP_SPI
527 help
528 Say Y here if you want to enable support for the panels built
529 around the Orise Technology OTA9601A display controller.
530
531config DRM_PANEL_ORISETECH_OTM8009A
532 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
533 depends on OF
534 depends on DRM_MIPI_DSI
535 depends on BACKLIGHT_CLASS_DEVICE
536 help
537 Say Y here if you want to enable support for Orise Technology
538 otm8009a 480x800 dsi 2dl panel.
539
540config DRM_PANEL_OSD_OSD101T2587_53TS
541 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
542 depends on OF
543 depends on DRM_MIPI_DSI
544 depends on BACKLIGHT_CLASS_DEVICE
545 help
546 Say Y here if you want to enable support for One Stop Displays
547 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
548
549config DRM_PANEL_PANASONIC_VVX10F034N00
550 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
551 depends on OF
552 depends on DRM_MIPI_DSI
553 depends on BACKLIGHT_CLASS_DEVICE
554 help
555 Say Y here if you want to enable support for Panasonic VVX10F034N00
556 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
557 Xperia Z2 tablets
558
559config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
560 tristate "Raspberry Pi 7-inch touchscreen panel"
561 depends on DRM_MIPI_DSI
562 help
563 Say Y here if you want to enable support for the Raspberry
564 Pi 7" Touchscreen. To compile this driver as a module,
565 choose M here.
566
567config DRM_PANEL_RAYDIUM_RM67191
568 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
569 depends on OF
570 depends on DRM_MIPI_DSI
571 depends on BACKLIGHT_CLASS_DEVICE
572 help
573 Say Y here if you want to enable support for Raydium RM67191 FHD
574 (1080x1920) DSI panel.
575
576config DRM_PANEL_RAYDIUM_RM68200
577 tristate "Raydium RM68200 720x1280 DSI video mode panel"
578 depends on OF
579 depends on DRM_MIPI_DSI
580 depends on BACKLIGHT_CLASS_DEVICE
581 help
582 Say Y here if you want to enable support for Raydium RM68200
583 720x1280 DSI video mode panel.
584
585config DRM_PANEL_RAYDIUM_RM692E5
586 tristate "Raydium RM692E5-based DSI panel"
587 depends on OF
588 depends on DRM_MIPI_DSI
589 depends on BACKLIGHT_CLASS_DEVICE
590 select DRM_DISPLAY_DSC_HELPER
591 select DRM_DISPLAY_HELPER
592 help
593 Say Y here if you want to enable support for Raydium RM692E5-based
594 display panels, such as the one found in the Fairphone 5 smartphone.
595
596config DRM_PANEL_RAYDIUM_RM69380
597 tristate "Raydium RM69380-based DSI panel"
598 depends on OF && GPIOLIB
599 depends on DRM_MIPI_DSI
600 depends on BACKLIGHT_CLASS_DEVICE
601 help
602 Say Y here if you want to enable support for Raydium RM69380-based
603 display panels.
604
605 This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
606 in combination with an EDO OLED panel.
607
608config DRM_PANEL_RONBO_RB070D30
609 tristate "Ronbo Electronics RB070D30 panel"
610 depends on OF
611 depends on DRM_MIPI_DSI
612 depends on BACKLIGHT_CLASS_DEVICE
613 help
614 Say Y here if you want to enable support for Ronbo Electronics
615 RB070D30 1024x600 DSI panel.
616
617config DRM_PANEL_SAMSUNG_AMS581VF01
618 tristate "Samsung AMS581VF01 panel"
619 depends on OF
620 depends on DRM_MIPI_DSI
621 depends on BACKLIGHT_CLASS_DEVICE
622 help
623 Say Y or M here if you want to enable support for the
624 Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
625
626config DRM_PANEL_SAMSUNG_AMS639RQ08
627 tristate "Samsung AMS639RQ08 panel"
628 depends on OF
629 depends on DRM_MIPI_DSI
630 depends on BACKLIGHT_CLASS_DEVICE
631 help
632 Say Y or M here if you want to enable support for the
633 Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
634
635config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
636 tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
637 depends on GPIOLIB && OF && REGULATOR
638 depends on DRM_MIPI_DSI
639 depends on BACKLIGHT_CLASS_DEVICE
640 help
641 Say Y here if you want to enable support for Samsung AMS427AP24 panel
642 with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
643 GT-I9195I). To compile this driver as a module, choose M here.
644
645config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
646 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
647 depends on OF
648 select DRM_MIPI_DSI
649 select VIDEOMODE_HELPERS
650
651config DRM_PANEL_SAMSUNG_ATNA33XC20
652 tristate "Samsung ATNA33XC20 eDP panel"
653 depends on OF
654 depends on BACKLIGHT_CLASS_DEVICE
655 depends on PM
656 select DRM_DISPLAY_DP_HELPER
657 select DRM_DISPLAY_HELPER
658 select DRM_DISPLAY_DP_AUX_BUS
659 help
660 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
661 be handled by the DRM_PANEL_SIMPLE driver because its power
662 sequencing is non-standard.
663
664config DRM_PANEL_SAMSUNG_DB7430
665 tristate "Samsung DB7430-based DPI panels"
666 depends on OF && SPI && GPIOLIB
667 depends on BACKLIGHT_CLASS_DEVICE
668 select DRM_MIPI_DBI
669 help
670 Say Y here if you want to enable support for the Samsung
671 DB7430 DPI display controller used in such devices as the
672 LMS397KF04 480x800 DPI panel.
673
674config DRM_PANEL_SAMSUNG_LD9040
675 tristate "Samsung LD9040 RGB/SPI panel"
676 depends on OF && SPI
677 depends on BACKLIGHT_CLASS_DEVICE
678 select VIDEOMODE_HELPERS
679
680config DRM_PANEL_SAMSUNG_S6E3FA7
681 tristate "Samsung S6E3FA7 panel driver"
682 depends on OF
683 depends on DRM_MIPI_DSI
684 depends on BACKLIGHT_CLASS_DEVICE
685 help
686 Say Y here if you want to enable support for the Samsung S6E3FA7
687 1920x2220 panel.
688
689config DRM_PANEL_SAMSUNG_S6D16D0
690 tristate "Samsung S6D16D0 DSI video mode panel"
691 depends on OF
692 depends on DRM_MIPI_DSI
693 select VIDEOMODE_HELPERS
694
695config DRM_PANEL_SAMSUNG_S6D27A1
696 tristate "Samsung S6D27A1 DPI panel driver"
697 depends on OF && SPI && GPIOLIB
698 select DRM_MIPI_DBI
699 help
700 Say Y here if you want to enable support for the Samsung
701 S6D27A1 DPI 480x800 panel.
702
703 This panel can be found in Samsung Galaxy Ace 2
704 GT-I8160 mobile phone.
705
706config DRM_PANEL_SAMSUNG_S6D7AA0
707 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
708 depends on OF
709 depends on BACKLIGHT_CLASS_DEVICE
710 select DRM_MIPI_DSI
711 select VIDEOMODE_HELPERS
712
713config DRM_PANEL_SAMSUNG_S6E3HA2
714 tristate "Samsung S6E3HA2 DSI video mode panel"
715 depends on OF
716 depends on DRM_MIPI_DSI
717 depends on BACKLIGHT_CLASS_DEVICE
718 select VIDEOMODE_HELPERS
719
720config DRM_PANEL_SAMSUNG_S6E3HA8
721 tristate "Samsung S6E3HA8 DSI video mode panel"
722 depends on OF
723 depends on DRM_MIPI_DSI
724 depends on BACKLIGHT_CLASS_DEVICE
725 select DRM_DISPLAY_DSC_HELPER
726 select VIDEOMODE_HELPERS
727
728config DRM_PANEL_SAMSUNG_S6E63J0X03
729 tristate "Samsung S6E63J0X03 DSI command mode panel"
730 depends on OF
731 depends on DRM_MIPI_DSI
732 depends on BACKLIGHT_CLASS_DEVICE
733 select VIDEOMODE_HELPERS
734
735config DRM_PANEL_SAMSUNG_S6E63M0
736 tristate "Samsung S6E63M0 RGB panel"
737 depends on OF
738 depends on BACKLIGHT_CLASS_DEVICE
739 help
740 Say Y here if you want to enable support for Samsung S6E63M0
741 AMOLED LCD panel. This panel can be accessed using SPI or
742 DSI.
743
744config DRM_PANEL_SAMSUNG_S6E63M0_SPI
745 tristate "Samsung S6E63M0 RGB SPI interface"
746 depends on SPI
747 depends on DRM_PANEL_SAMSUNG_S6E63M0
748 default DRM_PANEL_SAMSUNG_S6E63M0
749 select DRM_MIPI_DBI
750 help
751 Say Y here if you want to be able to access the Samsung
752 S6E63M0 panel using SPI.
753
754config DRM_PANEL_SAMSUNG_S6E63M0_DSI
755 tristate "Samsung S6E63M0 RGB DSI interface"
756 depends on DRM_MIPI_DSI
757 depends on DRM_PANEL_SAMSUNG_S6E63M0
758 help
759 Say Y here if you want to be able to access the Samsung
760 S6E63M0 panel using DSI.
761
762config DRM_PANEL_SAMSUNG_S6E8AA0
763 tristate "Samsung S6E8AA0 DSI video mode panel"
764 depends on OF
765 select DRM_MIPI_DSI
766 select VIDEOMODE_HELPERS
767
768config DRM_PANEL_SAMSUNG_SOFEF00
769 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
770 depends on OF
771 depends on DRM_MIPI_DSI
772 depends on BACKLIGHT_CLASS_DEVICE
773 select VIDEOMODE_HELPERS
774 help
775 Say Y or M here if you want to enable support for the Samsung AMOLED
776 command mode panels found in the OnePlus 6/6T smartphones.
777
778 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
779
780config DRM_PANEL_SEIKO_43WVF1G
781 tristate "Seiko 43WVF1G panel"
782 depends on OF
783 depends on BACKLIGHT_CLASS_DEVICE
784 select VIDEOMODE_HELPERS
785 help
786 Say Y here if you want to enable support for the Seiko
787 43WVF1G controller for 800x480 LCD panels
788
789config DRM_PANEL_SHARP_LQ101R1SX01
790 tristate "Sharp LQ101R1SX01 panel"
791 depends on OF
792 depends on DRM_MIPI_DSI
793 depends on BACKLIGHT_CLASS_DEVICE
794 help
795 Say Y here if you want to enable support for Sharp LQ101R1SX01
796 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
797 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
798 the host and has a built-in LED backlight.
799
800 To compile this driver as a module, choose M here: the module
801 will be called panel-sharp-lq101r1sx01.
802
803config DRM_PANEL_SHARP_LS037V7DW01
804 tristate "Sharp LS037V7DW01 VGA LCD panel"
805 depends on GPIOLIB && OF && REGULATOR
806 help
807 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
808 (480x640) LCD panel (found on the TI SDP3430 board).
809
810config DRM_PANEL_SHARP_LS043T1LE01
811 tristate "Sharp LS043T1LE01 qHD video mode panel"
812 depends on OF
813 depends on DRM_MIPI_DSI
814 depends on BACKLIGHT_CLASS_DEVICE
815 help
816 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
817 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
818
819config DRM_PANEL_SHARP_LS060T1SX01
820 tristate "Sharp LS060T1SX01 FullHD video mode panel"
821 depends on OF
822 depends on DRM_MIPI_DSI
823 depends on BACKLIGHT_CLASS_DEVICE
824 help
825 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
826 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
827 Bundle.
828
829config DRM_PANEL_SITRONIX_ST7701
830 tristate "Sitronix ST7701 panel driver"
831 depends on OF
832 depends on SPI || DRM_MIPI_DSI
833 select DRM_MIPI_DBI if SPI
834 depends on BACKLIGHT_CLASS_DEVICE
835 help
836 Say Y here if you want to enable support for the Sitronix
837 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
838 system interfaces.
839
840config DRM_PANEL_SITRONIX_ST7703
841 tristate "Sitronix ST7703 based MIPI touchscreen panels"
842 depends on OF
843 depends on DRM_MIPI_DSI
844 depends on BACKLIGHT_CLASS_DEVICE
845 help
846 Say Y here if you want to enable support for Sitronix ST7703 based
847 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
848 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
849 in backlight and touch controller.
850 Touch input support is provided by the goodix driver and needs to be
851 selected separately.
852
853config DRM_PANEL_SITRONIX_ST7789V
854 tristate "Sitronix ST7789V panel"
855 depends on OF && SPI
856 depends on BACKLIGHT_CLASS_DEVICE
857 help
858 Say Y here if you want to enable support for the Sitronix
859 ST7789V controller for 240x320 LCD panels
860
861config DRM_PANEL_SONY_ACX565AKM
862 tristate "Sony ACX565AKM panel"
863 depends on GPIOLIB && OF && SPI
864 depends on BACKLIGHT_CLASS_DEVICE
865 help
866 Say Y here if you want to enable support for the Sony ACX565AKM
867 800x600 3.5" panel (found on the Nokia N900).
868
869config DRM_PANEL_SONY_TD4353_JDI
870 tristate "Sony TD4353 JDI panel"
871 depends on GPIOLIB && OF
872 depends on DRM_MIPI_DSI
873 depends on BACKLIGHT_CLASS_DEVICE
874 help
875 Say Y here if you want to enable support for the Sony Tama
876 TD4353 JDI command mode panel as found on some Sony Xperia
877 XZ2 and XZ2 Compact smartphones.
878
879config DRM_PANEL_SONY_TULIP_TRULY_NT35521
880 tristate "Sony Tulip Truly NT35521 panel"
881 depends on GPIOLIB && OF
882 depends on DRM_MIPI_DSI
883 depends on BACKLIGHT_CLASS_DEVICE
884 help
885 Say Y here if you want to enable support for the Sony Tulip
886 NT35521 1280x720 video mode panel as found on Sony Xperia M4
887 Aqua phone.
888
889config DRM_PANEL_STARTEK_KD070FHFID015
890 tristate "STARTEK KD070FHFID015 panel"
891 depends on OF
892 depends on DRM_MIPI_DSI
893 depends on BACKLIGHT_CLASS_DEVICE
894 help
895 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
896 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
897 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
898 the host, a built-in LED backlight and touch controller.
899
900config DRM_PANEL_EDP
901 tristate "support for simple Embedded DisplayPort panels"
902 depends on OF
903 depends on BACKLIGHT_CLASS_DEVICE
904 depends on PM
905 select VIDEOMODE_HELPERS
906 select DRM_DISPLAY_DP_HELPER
907 select DRM_DISPLAY_HELPER
908 select DRM_DISPLAY_DP_AUX_BUS
909 select DRM_KMS_HELPER
910 help
911 DRM panel driver for dumb eDP panels that need at most a regulator and
912 a GPIO to be powered up. Optionally a backlight can be attached so
913 that it can be automatically turned off when the panel goes into a
914 low power state.
915
916config DRM_PANEL_SIMPLE
917 tristate "support for simple panels (other than eDP ones)"
918 depends on OF
919 depends on BACKLIGHT_CLASS_DEVICE
920 depends on PM
921 select VIDEOMODE_HELPERS
922 help
923 DRM panel driver for dumb non-eDP panels that need at most a regulator
924 and a GPIO to be powered up. Optionally a backlight can be attached so
925 that it can be automatically turned off when the panel goes into a
926 low power state.
927
928config DRM_PANEL_SYNAPTICS_R63353
929 tristate "Synaptics R63353-based panels"
930 depends on OF
931 depends on DRM_MIPI_DSI
932 depends on BACKLIGHT_CLASS_DEVICE
933 help
934 Say Y if you want to enable support for panels based on the
935 Synaptics R63353 controller.
936
937config DRM_PANEL_TDO_TL070WSH30
938 tristate "TDO TL070WSH30 DSI panel"
939 depends on OF
940 depends on DRM_MIPI_DSI
941 depends on BACKLIGHT_CLASS_DEVICE
942 help
943 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
944 panel module. The panel has a 1024×600 resolution and uses
945 24 bit RGB per pixel. It provides a MIPI DSI interface to
946 the host, a built-in LED backlight and touch controller.
947
948config DRM_PANEL_TPO_TD028TTEC1
949 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
950 depends on OF && SPI
951 depends on BACKLIGHT_CLASS_DEVICE
952 help
953 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
954 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
955
956config DRM_PANEL_TPO_TD043MTEA1
957 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
958 depends on GPIOLIB && OF && REGULATOR && SPI
959 help
960 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
961 4.3" panel (found on the OMAP3 Pandora board).
962
963config DRM_PANEL_TPO_TPG110
964 tristate "TPO TPG 800x400 panel"
965 depends on OF && SPI && GPIOLIB
966 depends on BACKLIGHT_CLASS_DEVICE
967 help
968 Say Y here if you want to enable support for TPO TPG110
969 400CH LTPS TFT LCD Single Chip Digital Driver for up to
970 800x400 LCD panels.
971
972config DRM_PANEL_TRULY_NT35597_WQXGA
973 tristate "Truly WQXGA"
974 depends on OF
975 depends on DRM_MIPI_DSI
976 help
977 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
978 Video Mode panel
979
980config DRM_PANEL_VISIONOX_R66451
981 tristate "Visionox R66451"
982 depends on OF
983 depends on DRM_MIPI_DSI
984 depends on BACKLIGHT_CLASS_DEVICE
985 select DRM_DISPLAY_DSC_HELPER
986 select DRM_DISPLAY_HELPER
987 help
988 Say Y here if you want to enable support for Visionox
989 R66451 1080x2340 AMOLED DSI panel.
990
991config DRM_PANEL_VISIONOX_RM69299
992 tristate "Visionox RM69299"
993 depends on OF
994 depends on DRM_MIPI_DSI
995 help
996 Say Y here if you want to enable support for Visionox
997 RM69299 DSI Video Mode panel.
998
999config DRM_PANEL_VISIONOX_VTDR6130
1000 tristate "Visionox VTDR6130"
1001 depends on OF
1002 depends on DRM_MIPI_DSI
1003 depends on BACKLIGHT_CLASS_DEVICE
1004 help
1005 Say Y here if you want to enable support for Visionox
1006 VTDR6130 1080x2400 AMOLED DSI panel.
1007
1008config DRM_PANEL_WIDECHIPS_WS2401
1009 tristate "Widechips WS2401 DPI panel driver"
1010 depends on SPI && GPIOLIB
1011 depends on BACKLIGHT_CLASS_DEVICE
1012 select DRM_MIPI_DBI
1013 help
1014 Say Y here if you want to enable support for the Widechips WS2401 DPI
1015 480x800 display controller used in panels such as Samsung LMS380KF01.
1016 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1017
1018config DRM_PANEL_XINPENG_XPP055C272
1019 tristate "Xinpeng XPP055C272 panel driver"
1020 depends on OF
1021 depends on DRM_MIPI_DSI
1022 depends on BACKLIGHT_CLASS_DEVICE
1023 help
1024 Say Y here if you want to enable support for the Xinpeng
1025 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1026 system interfaces.
1027endmenu
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3 bool
4 depends on DRM
5 help
6 Panel registration and lookup framework.
7
8menu "Display Panels"
9 depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12 tristate "ARM Versatile panel driver"
13 depends on OF
14 depends on MFD_SYSCON
15 select VIDEOMODE_HELPERS
16 help
17 This driver supports the ARM Versatile panels connected to ARM
18 reference designs. The panel is detected using special registers
19 in the Versatile family syscon registers.
20
21config DRM_PANEL_LVDS
22 tristate "Generic LVDS panel driver"
23 depends on OF
24 depends on BACKLIGHT_CLASS_DEVICE
25 select VIDEOMODE_HELPERS
26 help
27 This driver supports LVDS panels that don't require device-specific
28 handling of power supplies or control signals. It implements automatic
29 backlight handling if the panel is attached to a backlight controller.
30
31config DRM_PANEL_SIMPLE
32 tristate "support for simple panels"
33 depends on OF
34 depends on BACKLIGHT_CLASS_DEVICE
35 select VIDEOMODE_HELPERS
36 help
37 DRM panel driver for dumb panels that need at most a regulator and
38 a GPIO to be powered up. Optionally a backlight can be attached so
39 that it can be automatically turned off when the panel goes into a
40 low power state.
41
42config DRM_PANEL_FEIYANG_FY07024DI26A30D
43 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
44 depends on OF
45 depends on DRM_MIPI_DSI
46 depends on BACKLIGHT_CLASS_DEVICE
47 help
48 Say Y if you want to enable support for panels based on the
49 Feiyang FY07024DI26A30-D MIPI-DSI interface.
50
51config DRM_PANEL_ILITEK_IL9322
52 tristate "Ilitek ILI9322 320x240 QVGA panels"
53 depends on OF && SPI
54 select REGMAP
55 help
56 Say Y here if you want to enable support for Ilitek IL9322
57 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
58
59config DRM_PANEL_ILITEK_ILI9881C
60 tristate "Ilitek ILI9881C-based panels"
61 depends on OF
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
64 help
65 Say Y if you want to enable support for panels based on the
66 Ilitek ILI9881c controller.
67
68config DRM_PANEL_INNOLUX_P079ZCA
69 tristate "Innolux P079ZCA panel"
70 depends on OF
71 depends on DRM_MIPI_DSI
72 depends on BACKLIGHT_CLASS_DEVICE
73 help
74 Say Y here if you want to enable support for Innolux P079ZCA
75 TFT-LCD modules. The panel has a 1024x768 resolution and uses
76 24 bit RGB per pixel. It provides a MIPI DSI interface to
77 the host and has a built-in LED backlight.
78
79config DRM_PANEL_JDI_LT070ME05000
80 tristate "JDI LT070ME05000 WUXGA DSI panel"
81 depends on OF
82 depends on DRM_MIPI_DSI
83 depends on BACKLIGHT_CLASS_DEVICE
84 help
85 Say Y here if you want to enable support for JDI DSI video mode
86 panel as found in Google Nexus 7 (2013) devices.
87 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
88 24 bit per pixel.
89
90config DRM_PANEL_KINGDISPLAY_KD097D04
91 tristate "Kingdisplay kd097d04 panel"
92 depends on OF
93 depends on DRM_MIPI_DSI
94 depends on BACKLIGHT_CLASS_DEVICE
95 help
96 Say Y here if you want to enable support for Kingdisplay kd097d04
97 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
98 24 bit RGB per pixel. It provides a MIPI DSI interface to
99 the host and has a built-in LED backlight.
100
101config DRM_PANEL_SAMSUNG_LD9040
102 tristate "Samsung LD9040 RGB/SPI panel"
103 depends on OF && SPI
104 select VIDEOMODE_HELPERS
105
106config DRM_PANEL_LG_LB035Q02
107 tristate "LG LB035Q024573 RGB panel"
108 depends on GPIOLIB && OF && SPI
109 help
110 Say Y here if you want to enable support for the LB035Q02 RGB panel
111 (found on the Gumstix Overo Palo35 board). To compile this driver as
112 a module, choose M here.
113
114config DRM_PANEL_LG_LG4573
115 tristate "LG4573 RGB/SPI panel"
116 depends on OF && SPI
117 select VIDEOMODE_HELPERS
118 help
119 Say Y here if you want to enable support for LG4573 RGB panel.
120 To compile this driver as a module, choose M here.
121
122config DRM_PANEL_NEC_NL8048HL11
123 tristate "NEC NL8048HL11 RGB panel"
124 depends on GPIOLIB && OF && SPI
125 help
126 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
127 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
128 as a module, choose M here.
129
130config DRM_PANEL_NOVATEK_NT39016
131 tristate "Novatek NT39016 RGB/SPI panel"
132 depends on OF && SPI
133 depends on BACKLIGHT_CLASS_DEVICE
134 select REGMAP_SPI
135 help
136 Say Y here if you want to enable support for the panels built
137 around the Novatek NT39016 display controller.
138
139config DRM_PANEL_OLIMEX_LCD_OLINUXINO
140 tristate "Olimex LCD-OLinuXino panel"
141 depends on OF
142 depends on I2C
143 depends on BACKLIGHT_CLASS_DEVICE
144 help
145 The panel is used with different sizes LCDs, from 480x272 to
146 1280x800, and 24 bit per pixel.
147
148 Say Y here if you want to enable support for Olimex Ltd.
149 LCD-OLinuXino panel.
150
151config DRM_PANEL_ORISETECH_OTM8009A
152 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
153 depends on OF
154 depends on DRM_MIPI_DSI
155 depends on BACKLIGHT_CLASS_DEVICE
156 help
157 Say Y here if you want to enable support for Orise Technology
158 otm8009a 480x800 dsi 2dl panel.
159
160config DRM_PANEL_OSD_OSD101T2587_53TS
161 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
162 depends on OF
163 depends on DRM_MIPI_DSI
164 depends on BACKLIGHT_CLASS_DEVICE
165 help
166 Say Y here if you want to enable support for One Stop Displays
167 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
168
169config DRM_PANEL_PANASONIC_VVX10F034N00
170 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
171 depends on OF
172 depends on DRM_MIPI_DSI
173 depends on BACKLIGHT_CLASS_DEVICE
174 help
175 Say Y here if you want to enable support for Panasonic VVX10F034N00
176 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
177 Xperia Z2 tablets
178
179config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
180 tristate "Raspberry Pi 7-inch touchscreen panel"
181 depends on DRM_MIPI_DSI
182 help
183 Say Y here if you want to enable support for the Raspberry
184 Pi 7" Touchscreen. To compile this driver as a module,
185 choose M here.
186
187config DRM_PANEL_RAYDIUM_RM67191
188 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
189 depends on OF
190 depends on DRM_MIPI_DSI
191 depends on BACKLIGHT_CLASS_DEVICE
192 help
193 Say Y here if you want to enable support for Raydium RM67191 FHD
194 (1080x1920) DSI panel.
195
196config DRM_PANEL_RAYDIUM_RM68200
197 tristate "Raydium RM68200 720x1280 DSI video mode panel"
198 depends on OF
199 depends on DRM_MIPI_DSI
200 depends on BACKLIGHT_CLASS_DEVICE
201 help
202 Say Y here if you want to enable support for Raydium RM68200
203 720x1280 DSI video mode panel.
204
205config DRM_PANEL_ROCKTECH_JH057N00900
206 tristate "Rocktech JH057N00900 MIPI touchscreen panel"
207 depends on OF
208 depends on DRM_MIPI_DSI
209 depends on BACKLIGHT_CLASS_DEVICE
210 help
211 Say Y here if you want to enable support for Rocktech JH057N00900
212 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
213 resolution of 720x1440 pixels, a built in backlight and touch
214 controller.
215 Touch input support is provided by the goodix driver and needs to be
216 selected separately.
217
218config DRM_PANEL_RONBO_RB070D30
219 tristate "Ronbo Electronics RB070D30 panel"
220 depends on OF
221 depends on DRM_MIPI_DSI
222 depends on BACKLIGHT_CLASS_DEVICE
223 help
224 Say Y here if you want to enable support for Ronbo Electronics
225 RB070D30 1024x600 DSI panel.
226
227config DRM_PANEL_SAMSUNG_S6D16D0
228 tristate "Samsung S6D16D0 DSI video mode panel"
229 depends on OF
230 depends on DRM_MIPI_DSI
231 select VIDEOMODE_HELPERS
232
233config DRM_PANEL_SAMSUNG_S6E3HA2
234 tristate "Samsung S6E3HA2 DSI video mode panel"
235 depends on OF
236 depends on DRM_MIPI_DSI
237 depends on BACKLIGHT_CLASS_DEVICE
238 select VIDEOMODE_HELPERS
239
240config DRM_PANEL_SAMSUNG_S6E63J0X03
241 tristate "Samsung S6E63J0X03 DSI command mode panel"
242 depends on OF
243 depends on DRM_MIPI_DSI
244 depends on BACKLIGHT_CLASS_DEVICE
245 select VIDEOMODE_HELPERS
246
247config DRM_PANEL_SAMSUNG_S6E63M0
248 tristate "Samsung S6E63M0 RGB/SPI panel"
249 depends on OF
250 depends on SPI
251 depends on BACKLIGHT_CLASS_DEVICE
252 help
253 Say Y here if you want to enable support for Samsung S6E63M0
254 AMOLED LCD panel.
255
256config DRM_PANEL_SAMSUNG_S6E8AA0
257 tristate "Samsung S6E8AA0 DSI video mode panel"
258 depends on OF
259 select DRM_MIPI_DSI
260 select VIDEOMODE_HELPERS
261
262config DRM_PANEL_SEIKO_43WVF1G
263 tristate "Seiko 43WVF1G panel"
264 depends on OF
265 depends on BACKLIGHT_CLASS_DEVICE
266 select VIDEOMODE_HELPERS
267 help
268 Say Y here if you want to enable support for the Seiko
269 43WVF1G controller for 800x480 LCD panels
270
271config DRM_PANEL_SHARP_LQ101R1SX01
272 tristate "Sharp LQ101R1SX01 panel"
273 depends on OF
274 depends on DRM_MIPI_DSI
275 depends on BACKLIGHT_CLASS_DEVICE
276 help
277 Say Y here if you want to enable support for Sharp LQ101R1SX01
278 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
279 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
280 the host and has a built-in LED backlight.
281
282 To compile this driver as a module, choose M here: the module
283 will be called panel-sharp-lq101r1sx01.
284
285config DRM_PANEL_SHARP_LS037V7DW01
286 tristate "Sharp LS037V7DW01 VGA LCD panel"
287 depends on GPIOLIB && OF && REGULATOR
288 help
289 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
290 (480x640) LCD panel (found on the TI SDP3430 board).
291
292config DRM_PANEL_SHARP_LS043T1LE01
293 tristate "Sharp LS043T1LE01 qHD video mode panel"
294 depends on OF
295 depends on DRM_MIPI_DSI
296 depends on BACKLIGHT_CLASS_DEVICE
297 help
298 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
299 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
300
301config DRM_PANEL_SITRONIX_ST7701
302 tristate "Sitronix ST7701 panel driver"
303 depends on OF
304 depends on DRM_MIPI_DSI
305 depends on BACKLIGHT_CLASS_DEVICE
306 help
307 Say Y here if you want to enable support for the Sitronix
308 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
309 system interfaces.
310
311config DRM_PANEL_SITRONIX_ST7789V
312 tristate "Sitronix ST7789V panel"
313 depends on OF && SPI
314 depends on BACKLIGHT_CLASS_DEVICE
315 help
316 Say Y here if you want to enable support for the Sitronix
317 ST7789V controller for 240x320 LCD panels
318
319config DRM_PANEL_SONY_ACX565AKM
320 tristate "Sony ACX565AKM panel"
321 depends on GPIOLIB && OF && SPI
322 depends on BACKLIGHT_CLASS_DEVICE
323 help
324 Say Y here if you want to enable support for the Sony ACX565AKM
325 800x600 3.5" panel (found on the Nokia N900).
326
327config DRM_PANEL_TPO_TD028TTEC1
328 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
329 depends on OF && SPI
330 depends on BACKLIGHT_CLASS_DEVICE
331 help
332 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
333 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
334
335config DRM_PANEL_TPO_TD043MTEA1
336 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
337 depends on GPIOLIB && OF && REGULATOR && SPI
338 help
339 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
340 4.3" panel (found on the OMAP3 Pandora board).
341
342config DRM_PANEL_TPO_TPG110
343 tristate "TPO TPG 800x400 panel"
344 depends on OF && SPI && GPIOLIB
345 depends on BACKLIGHT_CLASS_DEVICE
346 help
347 Say Y here if you want to enable support for TPO TPG110
348 400CH LTPS TFT LCD Single Chip Digital Driver for up to
349 800x400 LCD panels.
350
351config DRM_PANEL_TRULY_NT35597_WQXGA
352 tristate "Truly WQXGA"
353 depends on OF
354 depends on DRM_MIPI_DSI
355 help
356 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
357 Video Mode panel
358endmenu