Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Hardware definitions for Palm Zire72
4 *
5 * Authors:
6 * Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
7 * Sergey Lapin <slapin@ossfans.org>
8 * Alex Osborne <bobofdoom@gmail.com>
9 * Jan Herman <2hp@seznam.cz>
10 *
11 * Rewrite for mainline:
12 * Marek Vasut <marek.vasut@gmail.com>
13 *
14 * (find more info at www.hackndev.com)
15 */
16
17#include <linux/platform_device.h>
18#include <linux/syscore_ops.h>
19#include <linux/delay.h>
20#include <linux/irq.h>
21#include <linux/gpio_keys.h>
22#include <linux/input.h>
23#include <linux/pda_power.h>
24#include <linux/pwm_backlight.h>
25#include <linux/gpio.h>
26#include <linux/wm97xx.h>
27#include <linux/power_supply.h>
28#include <linux/usb/gpio_vbus.h>
29#include <linux/platform_data/i2c-gpio.h>
30#include <linux/gpio/machine.h>
31
32#include <asm/mach-types.h>
33#include <asm/suspend.h>
34#include <asm/mach/arch.h>
35#include <asm/mach/map.h>
36
37#include "pxa27x.h"
38#include <mach/audio.h>
39#include "palmz72.h"
40#include <linux/platform_data/mmc-pxamci.h>
41#include <linux/platform_data/video-pxafb.h>
42#include <linux/platform_data/irda-pxaficp.h>
43#include <linux/platform_data/keypad-pxa27x.h>
44#include "udc.h"
45#include <linux/platform_data/asoc-palm27x.h>
46#include "palm27x.h"
47
48#include "pm.h"
49#include <linux/platform_data/media/camera-pxa.h>
50
51#include <media/soc_camera.h>
52
53#include "generic.h"
54#include "devices.h"
55
56/******************************************************************************
57 * Pin configuration
58 ******************************************************************************/
59static unsigned long palmz72_pin_config[] __initdata = {
60 /* MMC */
61 GPIO32_MMC_CLK,
62 GPIO92_MMC_DAT_0,
63 GPIO109_MMC_DAT_1,
64 GPIO110_MMC_DAT_2,
65 GPIO111_MMC_DAT_3,
66 GPIO112_MMC_CMD,
67 GPIO14_GPIO, /* SD detect */
68 GPIO115_GPIO, /* SD RO */
69 GPIO98_GPIO, /* SD power */
70
71 /* AC97 */
72 GPIO28_AC97_BITCLK,
73 GPIO29_AC97_SDATA_IN_0,
74 GPIO30_AC97_SDATA_OUT,
75 GPIO31_AC97_SYNC,
76 GPIO89_AC97_SYSCLK,
77 GPIO113_AC97_nRESET,
78
79 /* IrDA */
80 GPIO49_GPIO, /* ir disable */
81 GPIO46_FICP_RXD,
82 GPIO47_FICP_TXD,
83
84 /* PWM */
85 GPIO16_PWM0_OUT,
86
87 /* USB */
88 GPIO15_GPIO, /* usb detect */
89 GPIO95_GPIO, /* usb pullup */
90
91 /* Matrix keypad */
92 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
93 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
94 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
95 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
96 GPIO103_KP_MKOUT_0,
97 GPIO104_KP_MKOUT_1,
98 GPIO105_KP_MKOUT_2,
99
100 /* LCD */
101 GPIOxx_LCD_TFT_16BPP,
102
103 GPIO20_GPIO, /* bl power */
104 GPIO21_GPIO, /* LCD border switch */
105 GPIO22_GPIO, /* LCD border color */
106 GPIO96_GPIO, /* lcd power */
107
108 /* PXA Camera */
109 GPIO81_CIF_DD_0,
110 GPIO48_CIF_DD_5,
111 GPIO50_CIF_DD_3,
112 GPIO51_CIF_DD_2,
113 GPIO52_CIF_DD_4,
114 GPIO53_CIF_MCLK,
115 GPIO54_CIF_PCLK,
116 GPIO55_CIF_DD_1,
117 GPIO84_CIF_FV,
118 GPIO85_CIF_LV,
119 GPIO93_CIF_DD_6,
120 GPIO108_CIF_DD_7,
121
122 GPIO56_GPIO, /* OV9640 Powerdown */
123 GPIO57_GPIO, /* OV9640 Reset */
124 GPIO91_GPIO, /* OV9640 Power */
125
126 /* I2C */
127 GPIO117_GPIO, /* I2C_SCL */
128 GPIO118_GPIO, /* I2C_SDA */
129
130 /* Misc. */
131 GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */
132 GPIO88_GPIO, /* green led */
133 GPIO27_GPIO, /* WM9712 IRQ */
134};
135
136/******************************************************************************
137 * GPIO keyboard
138 ******************************************************************************/
139#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
140static const unsigned int palmz72_matrix_keys[] = {
141 KEY(0, 0, KEY_POWER),
142 KEY(0, 1, KEY_F1),
143 KEY(0, 2, KEY_ENTER),
144
145 KEY(1, 0, KEY_F2),
146 KEY(1, 1, KEY_F3),
147 KEY(1, 2, KEY_F4),
148
149 KEY(2, 0, KEY_UP),
150 KEY(2, 2, KEY_DOWN),
151
152 KEY(3, 0, KEY_RIGHT),
153 KEY(3, 2, KEY_LEFT),
154};
155
156static struct matrix_keymap_data almz72_matrix_keymap_data = {
157 .keymap = palmz72_matrix_keys,
158 .keymap_size = ARRAY_SIZE(palmz72_matrix_keys),
159};
160
161static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
162 .matrix_key_rows = 4,
163 .matrix_key_cols = 3,
164 .matrix_keymap_data = &almz72_matrix_keymap_data,
165
166 .debounce_interval = 30,
167};
168
169static void __init palmz72_kpc_init(void)
170{
171 pxa_set_keypad_info(&palmz72_keypad_platform_data);
172}
173#else
174static inline void palmz72_kpc_init(void) {}
175#endif
176
177/******************************************************************************
178 * LEDs
179 ******************************************************************************/
180#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
181static struct gpio_led gpio_leds[] = {
182 {
183 .name = "palmz72:green:led",
184 .default_trigger = "none",
185 .gpio = GPIO_NR_PALMZ72_LED_GREEN,
186 },
187};
188
189static struct gpio_led_platform_data gpio_led_info = {
190 .leds = gpio_leds,
191 .num_leds = ARRAY_SIZE(gpio_leds),
192};
193
194static struct platform_device palmz72_leds = {
195 .name = "leds-gpio",
196 .id = -1,
197 .dev = {
198 .platform_data = &gpio_led_info,
199 }
200};
201
202static void __init palmz72_leds_init(void)
203{
204 platform_device_register(&palmz72_leds);
205}
206#else
207static inline void palmz72_leds_init(void) {}
208#endif
209
210#ifdef CONFIG_PM
211
212/* We have some black magic here
213 * PalmOS ROM on recover expects special struct physical address
214 * to be transferred via PSPR. Using this struct PalmOS restores
215 * its state after sleep. As for Linux, we need to setup it the
216 * same way. More than that, PalmOS ROM changes some values in memory.
217 * For now only one location is found, which needs special treatment.
218 * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
219 * for reading backtraces for me :)
220 */
221
222#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
223
224static struct palmz72_resume_info palmz72_resume_info = {
225 .magic0 = 0xb4e6,
226 .magic1 = 1,
227
228 /* reset state, MMU off etc */
229 .arm_control = 0,
230 .aux_control = 0,
231 .ttb = 0,
232 .domain_access = 0,
233 .process_id = 0,
234};
235
236static unsigned long store_ptr;
237
238/* syscore_ops for Palm Zire 72 PM */
239
240static int palmz72_pm_suspend(void)
241{
242 /* setup the resume_info struct for the original bootloader */
243 palmz72_resume_info.resume_addr = (u32) cpu_resume;
244
245 /* Storing memory touched by ROM */
246 store_ptr = *PALMZ72_SAVE_DWORD;
247
248 /* Setting PSPR to a proper value */
249 PSPR = __pa_symbol(&palmz72_resume_info);
250
251 return 0;
252}
253
254static void palmz72_pm_resume(void)
255{
256 *PALMZ72_SAVE_DWORD = store_ptr;
257}
258
259static struct syscore_ops palmz72_pm_syscore_ops = {
260 .suspend = palmz72_pm_suspend,
261 .resume = palmz72_pm_resume,
262};
263
264static int __init palmz72_pm_init(void)
265{
266 if (machine_is_palmz72()) {
267 register_syscore_ops(&palmz72_pm_syscore_ops);
268 return 0;
269 }
270 return -ENODEV;
271}
272
273device_initcall(palmz72_pm_init);
274#endif
275
276/******************************************************************************
277 * SoC Camera
278 ******************************************************************************/
279#if defined(CONFIG_SOC_CAMERA_OV9640) || \
280 defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
281static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
282 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
283 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
284 .mclk_10khz = 2600,
285};
286
287/* Board I2C devices. */
288static struct i2c_board_info palmz72_i2c_device[] = {
289 {
290 I2C_BOARD_INFO("ov9640", 0x30),
291 }
292};
293
294static int palmz72_camera_power(struct device *dev, int power)
295{
296 gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
297 mdelay(50);
298 return 0;
299}
300
301static int palmz72_camera_reset(struct device *dev)
302{
303 gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
304 mdelay(50);
305 gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
306 mdelay(50);
307 return 0;
308}
309
310static struct soc_camera_link palmz72_iclink = {
311 .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
312 .board_info = &palmz72_i2c_device[0],
313 .i2c_adapter_id = 0,
314 .module_name = "ov96xx",
315 .power = &palmz72_camera_power,
316 .reset = &palmz72_camera_reset,
317 .flags = SOCAM_DATAWIDTH_8,
318};
319
320static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
321 .dev_id = "i2c-gpio.0",
322 .table = {
323 GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
324 GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
325 GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1,
326 GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
327 },
328};
329
330static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
331 .udelay = 10,
332 .timeout = 100,
333};
334
335static struct platform_device palmz72_i2c_bus_device = {
336 .name = "i2c-gpio",
337 .id = 0, /* we use this as a replacement for i2c-pxa */
338 .dev = {
339 .platform_data = &palmz72_i2c_bus_data,
340 }
341};
342
343static struct platform_device palmz72_camera = {
344 .name = "soc-camera-pdrv",
345 .id = -1,
346 .dev = {
347 .platform_data = &palmz72_iclink,
348 },
349};
350
351/* Here we request the camera GPIOs and configure them. We power up the camera
352 * module, deassert the reset pin, but put it into powerdown (low to no power
353 * consumption) mode. This allows us to later bring the module up fast. */
354static struct gpio palmz72_camera_gpios[] = {
355 { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" },
356 { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" },
357 { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" },
358};
359
360static inline void __init palmz72_cam_gpio_init(void)
361{
362 int ret;
363
364 ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
365 if (!ret)
366 gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
367 else
368 printk(KERN_ERR "Camera GPIO init failed!\n");
369
370 return;
371}
372
373static void __init palmz72_camera_init(void)
374{
375 palmz72_cam_gpio_init();
376 pxa_set_camera_info(&palmz72_pxacamera_platform_data);
377 gpiod_add_lookup_table(&palmz72_i2c_gpiod_table);
378 platform_device_register(&palmz72_i2c_bus_device);
379 platform_device_register(&palmz72_camera);
380}
381#else
382static inline void palmz72_camera_init(void) {}
383#endif
384
385static struct gpiod_lookup_table palmz72_mci_gpio_table = {
386 .dev_id = "pxa2xx-mci.0",
387 .table = {
388 GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_DETECT_N,
389 "cd", GPIO_ACTIVE_LOW),
390 GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_RO,
391 "wp", GPIO_ACTIVE_LOW),
392 GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_POWER_N,
393 "power", GPIO_ACTIVE_LOW),
394 { },
395 },
396};
397
398/******************************************************************************
399 * Machine init
400 ******************************************************************************/
401static void __init palmz72_init(void)
402{
403 pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
404 pxa_set_ffuart_info(NULL);
405 pxa_set_btuart_info(NULL);
406 pxa_set_stuart_info(NULL);
407
408 palm27x_mmc_init(&palmz72_mci_gpio_table);
409 palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
410 palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
411 GPIO_NR_PALMZ72_USB_PULLUP, 0);
412 palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
413 palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
414 -1, 113);
415 palm27x_pwm_init(-1, -1);
416 palm27x_power_init(-1, -1);
417 palm27x_pmic_init();
418 palmz72_kpc_init();
419 palmz72_leds_init();
420 palmz72_camera_init();
421}
422
423MACHINE_START(PALMZ72, "Palm Zire72")
424 .atag_offset = 0x100,
425 .map_io = pxa27x_map_io,
426 .nr_irqs = PXA_NR_IRQS,
427 .init_irq = pxa27x_init_irq,
428 .handle_irq = pxa27x_handle_irq,
429 .init_time = pxa_timer_init,
430 .init_machine = palmz72_init,
431 .restart = pxa_restart,
432MACHINE_END