Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device tree file for Firefly Rockchip RK3288 Core board
4 * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
5 */
6
7/dts-v1/;
8#include "rk3288-firefly-reload-core.dtsi"
9
10/ {
11 model = "Firefly-RK3288-reload";
12 compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
13
14 adc-keys {
15 compatible = "adc-keys";
16 io-channels = <&saradc 1>;
17 io-channel-names = "buttons";
18 keyup-threshold-microvolt = <1800000>;
19
20 button-recovery {
21 label = "Recovery";
22 linux,code = <KEY_VENDOR>;
23 press-threshold-microvolt = <0>;
24 };
25 };
26
27 gpio-keys {
28 compatible = "gpio-keys";
29
30 power {
31 wakeup-source;
32 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
33 label = "GPIO Power";
34 linux,code = <KEY_POWER>;
35 pinctrl-names = "default";
36 pinctrl-0 = <&pwr_key>;
37 };
38 };
39
40 ir-receiver {
41 compatible = "gpio-ir-receiver";
42 gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
43 };
44
45 leds {
46 compatible = "gpio-leds";
47
48 power {
49 gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
50 label = "firefly:blue:power";
51 pinctrl-names = "default";
52 pinctrl-0 = <&power_led>;
53 panic-indicator;
54 };
55
56 work {
57 gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
58 label = "firefly:blue:user";
59 linux,default-trigger = "rc-feedback";
60 pinctrl-names = "default";
61 pinctrl-0 = <&work_led>;
62 };
63 };
64
65 sdio_pwrseq: sdio-pwrseq {
66 compatible = "mmc-pwrseq-simple";
67 clocks = <&hym8563>;
68 clock-names = "ext_clock";
69 pinctrl-names = "default";
70 pinctrl-0 = <&wifi_enable>;
71 reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
72 };
73
74 sound {
75 compatible = "simple-audio-card";
76 simple-audio-card,name = "SPDIF";
77 simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
78 cpu { sound-dai = <&spdif>; };
79 codec { sound-dai = <&spdif_out>; };
80 };
81 };
82
83 spdif_out: spdif-out {
84 compatible = "linux,spdif-dit";
85 #sound-dai-cells = <0>;
86 };
87
88 vcc_host_5v: usb-host-regulator {
89 compatible = "regulator-fixed";
90 enable-active-high;
91 gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&host_vbus_drv>;
94 regulator-name = "vcc_host_5v";
95 regulator-min-microvolt = <5000000>;
96 regulator-max-microvolt = <5000000>;
97 regulator-always-on;
98 vin-supply = <&vcc_5v>;
99 };
100
101 vcc_5v: vcc_sys: vsys-regulator {
102 compatible = "regulator-fixed";
103 regulator-name = "vcc_5v";
104 regulator-min-microvolt = <5000000>;
105 regulator-max-microvolt = <5000000>;
106 regulator-always-on;
107 regulator-boot-on;
108 };
109
110 vcc_sd: sdmmc-regulator {
111 compatible = "regulator-fixed";
112 gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&sdmmc_pwr>;
115 regulator-name = "vcc_sd";
116 regulator-min-microvolt = <3300000>;
117 regulator-max-microvolt = <3300000>;
118 startup-delay-us = <100000>;
119 vin-supply = <&vcc_io>;
120 };
121
122 vcc_otg_5v: usb-otg-regulator {
123 compatible = "regulator-fixed";
124 enable-active-high;
125 gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
126 pinctrl-names = "default";
127 pinctrl-0 = <&otg_vbus_drv>;
128 regulator-name = "vcc_otg_5v";
129 regulator-min-microvolt = <5000000>;
130 regulator-max-microvolt = <5000000>;
131 regulator-always-on;
132 vin-supply = <&vcc_5v>;
133 };
134
135 dovdd_1v8: dovdd-1v8-regulator {
136 compatible = "regulator-fixed";
137 enable-active-high;
138 gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
139 pinctrl-names = "default";
140 pinctrl-0 = <&dvp_pwr>;
141 regulator-name = "dovdd_1v8";
142 regulator-min-microvolt = <1800000>;
143 regulator-max-microvolt = <1800000>;
144 vin-supply = <&vcc_io>;
145 };
146
147 vcc28_dvp: vcc28-dvp-regulator {
148 compatible = "regulator-fixed";
149 enable-active-high;
150 gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&dvp_pwr>;
153 regulator-name = "vcc28_dvp";
154 regulator-min-microvolt = <2800000>;
155 regulator-max-microvolt = <2800000>;
156 vin-supply = <&vcc_io>;
157 };
158
159 af_28: af_28-regulator {
160 compatible = "regulator-fixed";
161 enable-active-high;
162 gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
163 pinctrl-names = "default";
164 pinctrl-0 = <&dvp_pwr>;
165 regulator-name = "af_28";
166 regulator-min-microvolt = <2800000>;
167 regulator-max-microvolt = <2800000>;
168 vin-supply = <&vcc_io>;
169 };
170
171 dvdd_1v2: af_28-regulator {
172 compatible = "regulator-fixed";
173 enable-active-high;
174 gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&cif_pwr>;
177 regulator-name = "dvdd_1v2";
178 regulator-min-microvolt = <1200000>;
179 regulator-max-microvolt = <1200000>;
180 vin-supply = <&vcc_io>;
181 };
182
183 vbat_wl: wifi-regulator {
184 compatible = "regulator-fixed";
185 regulator-name = "vbat_wl";
186 regulator-min-microvolt = <3300000>;
187 regulator-max-microvolt = <3300000>;
188 vin-supply = <&vcc_io>;
189 };
190};
191
192&hdmi {
193 ddc-i2c-bus = <&i2c5>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&hdmi_cec_c0>;
196 status = "okay";
197};
198
199&i2c0 {
200 hym8563: hym8563@51 {
201 compatible = "haoyu,hym8563";
202 reg = <0x51>;
203 #clock-cells = <0>;
204 clock-frequency = <32768>;
205 clock-output-names = "xin32k";
206 interrupt-parent = <&gpio7>;
207 interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
208 pinctrl-names = "default";
209 pinctrl-0 = <&rtc_int>;
210 };
211};
212
213&i2c2 {
214 status = "okay";
215
216 codec: es8328@10 {
217 compatible = "everest,es8328";
218 DVDD-supply = <&vcca_33>;
219 AVDD-supply = <&vcca_33>;
220 PVDD-supply = <&vcca_33>;
221 HPVDD-supply = <&vcca_33>;
222 clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
223 clock-names = "i2s_hclk", "i2s_clk";
224 reg = <0x10>;
225 };
226};
227
228&i2c5 {
229 status = "okay";
230};
231
232&i2s {
233 status = "okay";
234};
235
236&saradc {
237 status = "okay";
238};
239
240&sdmmc {
241 bus-width = <4>;
242 cap-mmc-highspeed;
243 cap-sd-highspeed;
244 card-detect-delay = <200>;
245 disable-wp;
246 pinctrl-names = "default";
247 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
248 vmmc-supply = <&vcc_sd>;
249 vqmmc-supply = <&vccio_sd>;
250 status = "okay";
251};
252
253&sdio0 {
254 bus-width = <4>;
255 cap-sd-highspeed;
256 cap-sdio-irq;
257 mmc-pwrseq = <&sdio_pwrseq>;
258 non-removable;
259 pinctrl-names = "default";
260 pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
261 sd-uhs-sdr12;
262 sd-uhs-sdr25;
263 sd-uhs-sdr50;
264 sd-uhs-ddr50;
265 vmmc-supply = <&vbat_wl>;
266 vqmmc-supply = <&vccio_wl>;
267 status = "okay";
268};
269
270&spdif {
271 status = "okay";
272};
273
274&uart0 {
275 pinctrl-names = "default";
276 pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
277 status = "okay";
278};
279
280&uart1 {
281 status = "okay";
282};
283
284&uart2 {
285 status = "okay";
286};
287
288&uart3 {
289 status = "okay";
290};
291
292&usbphy {
293 status = "okay";
294};
295
296&usb_host1 {
297 pinctrl-names = "default";
298 pinctrl-0 = <&usbhub_rst>;
299 status = "okay";
300};
301
302&usb_otg {
303 status = "okay";
304};
305
306&pinctrl {
307 ir {
308 ir_int: ir-int {
309 rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
310 };
311 };
312
313 dvp {
314 dvp_pwr: dvp-pwr {
315 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
316 };
317
318 cif_pwr: cif-pwr {
319 rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
320 };
321 };
322
323 hym8563 {
324 rtc_int: rtc-int {
325 rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
326 };
327 };
328
329 keys {
330 pwr_key: pwr-key {
331 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
332 };
333 };
334
335 leds {
336 power_led: power-led {
337 rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
338 };
339
340 work_led: work-led {
341 rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
342 };
343 };
344
345 sdmmc {
346 /*
347 * Default drive strength isn't enough to achieve even
348 * high-speed mode on firefly board so bump up to 12ma.
349 */
350 sdmmc_bus4: sdmmc-bus4 {
351 rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
352 <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
353 <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
354 <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
355 };
356
357 sdmmc_clk: sdmmc-clk {
358 rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
359 };
360
361 sdmmc_cmd: sdmmc-cmd {
362 rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
363 };
364
365 sdmmc_pwr: sdmmc-pwr {
366 rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
367 };
368 };
369
370 sdio {
371 wifi_enable: wifi-enable {
372 rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
373 };
374 };
375
376 usb_host {
377 host_vbus_drv: host-vbus-drv {
378 rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
379 };
380
381 usbhub_rst: usbhub-rst {
382 rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
383 };
384 };
385
386 usb_otg {
387 otg_vbus_drv: otg-vbus-drv {
388 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
389 };
390 };
391};