Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos4412 based Galaxy S3 board device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 */
8
9/dts-v1/;
10#include "exynos4412-midas.dtsi"
11
12/ {
13 aliases {
14 i2c9 = &i2c_ak8975;
15 i2c10 = &i2c_cm36651;
16 };
17
18 aat1290 {
19 compatible = "skyworks,aat1290";
20 flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
21 enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
22
23 pinctrl-names = "default", "host", "isp";
24 pinctrl-0 = <&camera_flash_host>;
25 pinctrl-1 = <&camera_flash_host>;
26 pinctrl-2 = <&camera_flash_isp>;
27
28 flash-led {
29 label = "flash";
30 led-max-microamp = <520833>;
31 flash-max-microamp = <1012500>;
32 flash-max-timeout-us = <1940000>;
33 };
34 };
35
36 lcd_vdd3_reg: voltage-regulator-6 {
37 compatible = "regulator-fixed";
38 regulator-name = "LCD_VDD_2.2V";
39 regulator-min-microvolt = <2200000>;
40 regulator-max-microvolt = <2200000>;
41 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
42 enable-active-high;
43 };
44
45 ps_als_reg: voltage-regulator-7 {
46 compatible = "regulator-fixed";
47 regulator-name = "LED_A_3.0V";
48 regulator-min-microvolt = <3000000>;
49 regulator-max-microvolt = <3000000>;
50 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
51 enable-active-high;
52 };
53
54 i2c_ak8975: i2c-gpio-0 {
55 compatible = "i2c-gpio";
56 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
57 i2c-gpio,delay-us = <2>;
58 #address-cells = <1>;
59 #size-cells = <0>;
60 status = "okay";
61
62 ak8975@c {
63 compatible = "asahi-kasei,ak8975";
64 reg = <0x0c>;
65 gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
66 };
67 };
68
69 i2c_cm36651: i2c-gpio-2 {
70 compatible = "i2c-gpio";
71 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
72 i2c-gpio,delay-us = <2>;
73 #address-cells = <1>;
74 #size-cells = <0>;
75
76 cm36651@18 {
77 compatible = "capella,cm36651";
78 reg = <0x18>;
79 interrupt-parent = <&gpx0>;
80 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
81 vled-supply = <&ps_als_reg>;
82 };
83 };
84};
85
86&buck9_reg {
87 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
88};
89
90&cam_af_reg {
91 gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
92 status = "okay";
93};
94
95&cam_io_reg {
96 gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
97 status = "okay";
98};
99
100&dsi_0 {
101 status = "okay";
102
103 panel@0 {
104 compatible = "samsung,s6e8aa0";
105 reg = <0>;
106 vdd3-supply = <&lcd_vdd3_reg>;
107 vci-supply = <&ldo25_reg>;
108 reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
109 power-on-delay= <50>;
110 reset-delay = <100>;
111 init-delay = <100>;
112 flip-horizontal;
113 flip-vertical;
114 panel-width-mm = <58>;
115 panel-height-mm = <103>;
116
117 display-timings {
118 timing-0 {
119 clock-frequency = <57153600>;
120 hactive = <720>;
121 vactive = <1280>;
122 hfront-porch = <5>;
123 hback-porch = <5>;
124 hsync-len = <5>;
125 vfront-porch = <13>;
126 vback-porch = <1>;
127 vsync-len = <2>;
128 };
129 };
130 };
131};
132
133&i2c_3 {
134 mms114-touchscreen@48 {
135 compatible = "melfas,mms114";
136 reg = <0x48>;
137 interrupt-parent = <&gpm2>;
138 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
139 touchscreen-size-x = <720>;
140 touchscreen-size-y = <1280>;
141 avdd-supply = <&ldo23_reg>;
142 vdd-supply = <&ldo24_reg>;
143 };
144};
145
146&ldo25_reg {
147 regulator-name = "LCD_VCC_3.3V";
148 regulator-min-microvolt = <2800000>;
149 regulator-max-microvolt = <2800000>;
150};
151
152&pinctrl_0 {
153 camera_flash_host: camera-flash-host {
154 samsung,pins = "gpj1-0";
155 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
156 samsung,pin-val = <0>;
157 };
158
159 camera_flash_isp: camera-flash-isp {
160 samsung,pins = "gpj1-0";
161 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
162 samsung,pin-val = <1>;
163 };
164};
165
166&s5c73m3 {
167 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
168 vdda-supply = <&ldo17_reg>;
169 status = "okay";
170};