Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * If TRACE_SYSTEM is defined, that will be the directory created
4 * in the ftrace directory under /sys/kernel/tracing/events/<system>
5 *
6 * The define_trace.h below will also look for a file name of
7 * TRACE_SYSTEM.h where TRACE_SYSTEM is what is defined here.
8 * In this case, it would look for sample-trace.h
9 *
10 * If the header name will be different than the system name
11 * (as in this case), then you can override the header name that
12 * define_trace.h will look up by defining TRACE_INCLUDE_FILE
13 *
14 * This file is called trace-events-sample.h but we want the system
15 * to be called "sample-trace". Therefore we must define the name of this
16 * file:
17 *
18 * #define TRACE_INCLUDE_FILE trace-events-sample
19 *
20 * As we do an the bottom of this file.
21 *
22 * Notice that TRACE_SYSTEM should be defined outside of #if
23 * protection, just like TRACE_INCLUDE_FILE.
24 */
25#undef TRACE_SYSTEM
26#define TRACE_SYSTEM sample-trace
27
28/*
29 * TRACE_SYSTEM is expected to be a C valid variable (alpha-numeric
30 * and underscore), although it may start with numbers. If for some
31 * reason it is not, you need to add the following lines:
32 */
33#undef TRACE_SYSTEM_VAR
34#define TRACE_SYSTEM_VAR sample_trace
35/*
36 * But the above is only needed if TRACE_SYSTEM is not alpha-numeric
37 * and underscored. By default, TRACE_SYSTEM_VAR will be equal to
38 * TRACE_SYSTEM. As TRACE_SYSTEM_VAR must be alpha-numeric, if
39 * TRACE_SYSTEM is not, then TRACE_SYSTEM_VAR must be defined with
40 * only alpha-numeric and underscores.
41 *
42 * The TRACE_SYSTEM_VAR is only used internally and not visible to
43 * user space.
44 */
45
46/*
47 * Notice that this file is not protected like a normal header.
48 * We also must allow for rereading of this file. The
49 *
50 * || defined(TRACE_HEADER_MULTI_READ)
51 *
52 * serves this purpose.
53 */
54#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
55#define _TRACE_EVENT_SAMPLE_H
56
57/*
58 * All trace headers should include tracepoint.h, until we finally
59 * make it into a standard header.
60 */
61#include <linux/tracepoint.h>
62
63/*
64 * The TRACE_EVENT macro is broken up into 5 parts.
65 *
66 * name: name of the trace point. This is also how to enable the tracepoint.
67 * A function called trace_foo_bar() will be created.
68 *
69 * proto: the prototype of the function trace_foo_bar()
70 * Here it is trace_foo_bar(char *foo, int bar).
71 *
72 * args: must match the arguments in the prototype.
73 * Here it is simply "foo, bar".
74 *
75 * struct: This defines the way the data will be stored in the ring buffer.
76 * The items declared here become part of a special structure
77 * called "__entry", which can be used in the fast_assign part of the
78 * TRACE_EVENT macro.
79 *
80 * Here are the currently defined types you can use:
81 *
82 * __field : Is broken up into type and name. Where type can be any
83 * primitive type (integer, long or pointer).
84 *
85 * __field(int, foo)
86 *
87 * __entry->foo = 5;
88 *
89 * __field_struct : This can be any static complex data type (struct, union
90 * but not an array). Be careful using complex types, as each
91 * event is limited in size, and copying large amounts of data
92 * into the ring buffer can slow things down.
93 *
94 * __field_struct(struct bar, foo)
95 *
96 * __entry->bar.x = y;
97
98 * __array: There are three fields (type, name, size). The type is the
99 * type of elements in the array, the name is the name of the array.
100 * size is the number of items in the array (not the total size).
101 *
102 * __array( char, foo, 10) is the same as saying: char foo[10];
103 *
104 * Assigning arrays can be done like any array:
105 *
106 * __entry->foo[0] = 'a';
107 *
108 * memcpy(__entry->foo, bar, 10);
109 *
110 * __dynamic_array: This is similar to array, but can vary its size from
111 * instance to instance of the tracepoint being called.
112 * Like __array, this too has three elements (type, name, size);
113 * type is the type of the element, name is the name of the array.
114 * The size is different than __array. It is not a static number,
115 * but the algorithm to figure out the length of the array for the
116 * specific instance of tracepoint. Again, size is the number of
117 * items in the array, not the total length in bytes.
118 *
119 * __dynamic_array( int, foo, bar) is similar to: int foo[bar];
120 *
121 * Note, unlike arrays, you must use the __get_dynamic_array() macro
122 * to access the array.
123 *
124 * memcpy(__get_dynamic_array(foo), bar, 10);
125 *
126 * Notice, that "__entry" is not needed here.
127 *
128 * __string: This is a special kind of __dynamic_array. It expects to
129 * have a null terminated character array passed to it (it allows
130 * for NULL too, which would be converted into "(null)"). __string
131 * takes two parameter (name, src), where name is the name of
132 * the string saved, and src is the string to copy into the
133 * ring buffer.
134 *
135 * __string(foo, bar) is similar to: strcpy(foo, bar)
136 *
137 * To assign a string, use the helper macro __assign_str().
138 *
139 * __assign_str(foo);
140 *
141 * The __string() macro saves off the string that is passed into
142 * the second parameter, and the __assign_str() will store than
143 * saved string into the "foo" field.
144 *
145 * __vstring: This is similar to __string() but instead of taking a
146 * dynamic length, it takes a variable list va_list 'va' variable.
147 * Some event callers already have a message from parameters saved
148 * in a va_list. Passing in the format and the va_list variable
149 * will save just enough on the ring buffer for that string.
150 * Note, the va variable used is a pointer to a va_list, not
151 * to the va_list directly.
152 *
153 * (va_list *va)
154 *
155 * __vstring(foo, fmt, va) is similar to: vsnprintf(foo, fmt, va)
156 *
157 * To assign the string, use the helper macro __assign_vstr().
158 *
159 * __assign_vstr(foo, fmt, va);
160 *
161 * In most cases, the __assign_vstr() macro will take the same
162 * parameters as the __vstring() macro had to declare the string.
163 * Use __get_str() to retrieve the __vstring() just like it would for
164 * __string().
165 *
166 * __string_len: This is a helper to a __dynamic_array, but it understands
167 * that the array has characters in it, it will allocate 'len' + 1 bytes
168 * in the ring buffer and add a '\0' to the string. This is
169 * useful if the string being saved has no terminating '\0' byte.
170 * It requires that the length of the string is known as it acts
171 * like a memcpy().
172 *
173 * Declared with:
174 *
175 * __string_len(foo, bar, len)
176 *
177 * To assign this string, use the helper macro __assign_str().
178 * The length is saved via the __string_len() and is retrieved in
179 * __assign_str().
180 *
181 * __assign_str(foo);
182 *
183 * Then len + 1 is allocated to the ring buffer, and a nul terminating
184 * byte is added. This is similar to:
185 *
186 * memcpy(__get_str(foo), bar, len);
187 * __get_str(foo)[len] = 0;
188 *
189 * The advantage of using this over __dynamic_array, is that it
190 * takes care of allocating the extra byte on the ring buffer
191 * for the '\0' terminating byte, and __get_str(foo) can be used
192 * in the TP_printk().
193 *
194 * __bitmask: This is another kind of __dynamic_array, but it expects
195 * an array of longs, and the number of bits to parse. It takes
196 * two parameters (name, nr_bits), where name is the name of the
197 * bitmask to save, and the nr_bits is the number of bits to record.
198 *
199 * __bitmask(target_cpu, nr_cpumask_bits)
200 *
201 * To assign a bitmask, use the __assign_bitmask() helper macro.
202 *
203 * __assign_bitmask(target_cpus, cpumask_bits(bar), nr_cpumask_bits);
204 *
205 * __cpumask: This is pretty much the same as __bitmask but is specific for
206 * CPU masks. The type displayed to the user via the format files will
207 * be "cpumaks_t" such that user space may deal with them differently
208 * if they choose to do so, and the bits is always set to nr_cpumask_bits.
209 *
210 * __cpumask(target_cpu)
211 *
212 * To assign a cpumask, use the __assign_cpumask() helper macro.
213 *
214 * __assign_cpumask(target_cpus, cpumask_bits(bar));
215 *
216 * fast_assign: This is a C like function that is used to store the items
217 * into the ring buffer. A special variable called "__entry" will be the
218 * structure that points into the ring buffer and has the same fields as
219 * described by the struct part of TRACE_EVENT above.
220 *
221 * printk: This is a way to print out the data in pretty print. This is
222 * useful if the system crashes and you are logging via a serial line,
223 * the data can be printed to the console using this "printk" method.
224 * This is also used to print out the data from the trace files.
225 * Again, the __entry macro is used to access the data from the ring buffer.
226 *
227 * Note, __dynamic_array, __string, __bitmask and __cpumask require special
228 * helpers to access the data.
229 *
230 * For __dynamic_array(int, foo, bar) use __get_dynamic_array(foo)
231 * Use __get_dynamic_array_len(foo) to get the length of the array
232 * saved. Note, __get_dynamic_array_len() returns the total allocated
233 * length of the dynamic array; __print_array() expects the second
234 * parameter to be the number of elements. To get that, the array length
235 * needs to be divided by the element size.
236 *
237 * For __string(foo, bar) use __get_str(foo)
238 *
239 * For __bitmask(target_cpus, nr_cpumask_bits) use __get_bitmask(target_cpus)
240 *
241 * For __cpumask(target_cpus) use __get_cpumask(target_cpus)
242 *
243 *
244 * Note, that for both the assign and the printk, __entry is the handler
245 * to the data structure in the ring buffer, and is defined by the
246 * TP_STRUCT__entry.
247 */
248
249/*
250 * It is OK to have helper functions in the file, but they need to be protected
251 * from being defined more than once. Remember, this file gets included more
252 * than once.
253 */
254#ifndef __TRACE_EVENT_SAMPLE_HELPER_FUNCTIONS
255#define __TRACE_EVENT_SAMPLE_HELPER_FUNCTIONS
256static inline int __length_of(const int *list)
257{
258 int i;
259
260 if (!list)
261 return 0;
262
263 for (i = 0; list[i]; i++)
264 ;
265 return i;
266}
267
268enum {
269 TRACE_SAMPLE_FOO = 2,
270 TRACE_SAMPLE_BAR = 4,
271 TRACE_SAMPLE_ZOO = 8,
272};
273#endif
274
275/*
276 * If enums are used in the TP_printk(), their names will be shown in
277 * format files and not their values. This can cause problems with user
278 * space programs that parse the format files to know how to translate
279 * the raw binary trace output into human readable text.
280 *
281 * To help out user space programs, any enum that is used in the TP_printk()
282 * should be defined by TRACE_DEFINE_ENUM() macro. All that is needed to
283 * be done is to add this macro with the enum within it in the trace
284 * header file, and it will be converted in the output.
285 */
286
287TRACE_DEFINE_ENUM(TRACE_SAMPLE_FOO);
288TRACE_DEFINE_ENUM(TRACE_SAMPLE_BAR);
289TRACE_DEFINE_ENUM(TRACE_SAMPLE_ZOO);
290
291TRACE_EVENT(foo_bar,
292
293 TP_PROTO(const char *foo, int bar, const int *lst,
294 const char *string, const struct cpumask *mask,
295 const char *fmt, va_list *va),
296
297 TP_ARGS(foo, bar, lst, string, mask, fmt, va),
298
299 TP_STRUCT__entry(
300 __array( char, foo, 10 )
301 __field( int, bar )
302 __dynamic_array(int, list, __length_of(lst))
303 __string( str, string )
304 __bitmask( cpus, num_possible_cpus() )
305 __cpumask( cpum )
306 __vstring( vstr, fmt, va )
307 __string_len( lstr, foo, bar / 2 < strlen(foo) ? bar / 2 : strlen(foo) )
308 ),
309
310 TP_fast_assign(
311 strscpy(__entry->foo, foo, 10);
312 __entry->bar = bar;
313 memcpy(__get_dynamic_array(list), lst,
314 __length_of(lst) * sizeof(int));
315 __assign_str(str);
316 __assign_str(lstr);
317 __assign_vstr(vstr, fmt, va);
318 __assign_bitmask(cpus, cpumask_bits(mask), num_possible_cpus());
319 __assign_cpumask(cpum, cpumask_bits(mask));
320 ),
321
322 TP_printk("foo %s %d %s %s %s %s %s %s (%s) (%s) %s", __entry->foo, __entry->bar,
323
324/*
325 * Notice here the use of some helper functions. This includes:
326 *
327 * __print_symbolic( variable, { value, "string" }, ... ),
328 *
329 * The variable is tested against each value of the { } pair. If
330 * the variable matches one of the values, then it will print the
331 * string in that pair. If non are matched, it returns a string
332 * version of the number (if __entry->bar == 7 then "7" is returned).
333 */
334 __print_symbolic(__entry->bar,
335 { 0, "zero" },
336 { TRACE_SAMPLE_FOO, "TWO" },
337 { TRACE_SAMPLE_BAR, "FOUR" },
338 { TRACE_SAMPLE_ZOO, "EIGHT" },
339 { 10, "TEN" }
340 ),
341
342/*
343 * __print_flags( variable, "delim", { value, "flag" }, ... ),
344 *
345 * This is similar to __print_symbolic, except that it tests the bits
346 * of the value. If ((FLAG & variable) == FLAG) then the string is
347 * printed. If more than one flag matches, then each one that does is
348 * also printed with delim in between them.
349 * If not all bits are accounted for, then the not found bits will be
350 * added in hex format: 0x506 will show BIT2|BIT4|0x500
351 */
352 __print_flags(__entry->bar, "|",
353 { 1, "BIT1" },
354 { 2, "BIT2" },
355 { 4, "BIT3" },
356 { 8, "BIT4" }
357 ),
358/*
359 * __print_array( array, len, element_size )
360 *
361 * This prints out the array that is defined by __array in a nice format.
362 */
363 __print_array(__get_dynamic_array(list),
364 __get_dynamic_array_len(list) / sizeof(int),
365 sizeof(int)),
366
367/* A shortcut is to use __print_dynamic_array for dynamic arrays */
368
369 __print_dynamic_array(list, sizeof(int)),
370
371 __get_str(str), __get_str(lstr),
372 __get_bitmask(cpus), __get_cpumask(cpum),
373 __get_str(vstr))
374);
375
376/*
377 * There may be a case where a tracepoint should only be called if
378 * some condition is set. Otherwise the tracepoint should not be called.
379 * But to do something like:
380 *
381 * if (cond)
382 * trace_foo();
383 *
384 * Would cause a little overhead when tracing is not enabled, and that
385 * overhead, even if small, is not something we want. As tracepoints
386 * use static branch (aka jump_labels), where no branch is taken to
387 * skip the tracepoint when not enabled, and a jmp is placed to jump
388 * to the tracepoint code when it is enabled, having a if statement
389 * nullifies that optimization. It would be nice to place that
390 * condition within the static branch. This is where TRACE_EVENT_CONDITION
391 * comes in.
392 *
393 * TRACE_EVENT_CONDITION() is just like TRACE_EVENT, except it adds another
394 * parameter just after args. Where TRACE_EVENT has:
395 *
396 * TRACE_EVENT(name, proto, args, struct, assign, printk)
397 *
398 * the CONDITION version has:
399 *
400 * TRACE_EVENT_CONDITION(name, proto, args, cond, struct, assign, printk)
401 *
402 * Everything is the same as TRACE_EVENT except for the new cond. Think
403 * of the cond variable as:
404 *
405 * if (cond)
406 * trace_foo_bar_with_cond();
407 *
408 * Except that the logic for the if branch is placed after the static branch.
409 * That is, the if statement that processes the condition will not be
410 * executed unless that traecpoint is enabled. Otherwise it still remains
411 * a nop.
412 */
413TRACE_EVENT_CONDITION(foo_bar_with_cond,
414
415 TP_PROTO(const char *foo, int bar),
416
417 TP_ARGS(foo, bar),
418
419 TP_CONDITION(!(bar % 10)),
420
421 TP_STRUCT__entry(
422 __string( foo, foo )
423 __field( int, bar )
424 ),
425
426 TP_fast_assign(
427 __assign_str(foo);
428 __entry->bar = bar;
429 ),
430
431 TP_printk("foo %s %d", __get_str(foo), __entry->bar)
432);
433
434int foo_bar_reg(void);
435void foo_bar_unreg(void);
436
437/*
438 * Now in the case that some function needs to be called when the
439 * tracepoint is enabled and/or when it is disabled, the
440 * TRACE_EVENT_FN() serves this purpose. This is just like TRACE_EVENT()
441 * but adds two more parameters at the end:
442 *
443 * TRACE_EVENT_FN( name, proto, args, struct, assign, printk, reg, unreg)
444 *
445 * reg and unreg are functions with the prototype of:
446 *
447 * void reg(void)
448 *
449 * The reg function gets called before the tracepoint is enabled, and
450 * the unreg function gets called after the tracepoint is disabled.
451 *
452 * Note, reg and unreg are allowed to be NULL. If you only need to
453 * call a function before enabling, or after disabling, just set one
454 * function and pass in NULL for the other parameter.
455 */
456TRACE_EVENT_FN(foo_bar_with_fn,
457
458 TP_PROTO(const char *foo, int bar),
459
460 TP_ARGS(foo, bar),
461
462 TP_STRUCT__entry(
463 __string( foo, foo )
464 __field( int, bar )
465 ),
466
467 TP_fast_assign(
468 __assign_str(foo);
469 __entry->bar = bar;
470 ),
471
472 TP_printk("foo %s %d", __get_str(foo), __entry->bar),
473
474 foo_bar_reg, foo_bar_unreg
475);
476
477/*
478 * Each TRACE_EVENT macro creates several helper functions to produce
479 * the code to add the tracepoint, create the files in the trace
480 * directory, hook it to perf, assign the values and to print out
481 * the raw data from the ring buffer. To prevent too much bloat,
482 * if there are more than one tracepoint that uses the same format
483 * for the proto, args, struct, assign and printk, and only the name
484 * is different, it is highly recommended to use the DECLARE_EVENT_CLASS
485 *
486 * DECLARE_EVENT_CLASS() macro creates most of the functions for the
487 * tracepoint. Then DEFINE_EVENT() is use to hook a tracepoint to those
488 * functions. This DEFINE_EVENT() is an instance of the class and can
489 * be enabled and disabled separately from other events (either TRACE_EVENT
490 * or other DEFINE_EVENT()s).
491 *
492 * Note, TRACE_EVENT() itself is simply defined as:
493 *
494 * #define TRACE_EVENT(name, proto, args, tstruct, assign, printk) \
495 * DECLARE_EVENT_CLASS(name, proto, args, tstruct, assign, printk); \
496 * DEFINE_EVENT(name, name, proto, args)
497 *
498 * The DEFINE_EVENT() also can be declared with conditions and reg functions:
499 *
500 * DEFINE_EVENT_CONDITION(template, name, proto, args, cond);
501 * DEFINE_EVENT_FN(template, name, proto, args, reg, unreg);
502 */
503DECLARE_EVENT_CLASS(foo_template,
504
505 TP_PROTO(const char *foo, int bar),
506
507 TP_ARGS(foo, bar),
508
509 TP_STRUCT__entry(
510 __string( foo, foo )
511 __field( int, bar )
512 ),
513
514 TP_fast_assign(
515 __assign_str(foo);
516 __entry->bar = bar;
517 ),
518
519 TP_printk("foo %s %d", __get_str(foo), __entry->bar)
520);
521
522/*
523 * Here's a better way for the previous samples (except, the first
524 * example had more fields and could not be used here).
525 */
526DEFINE_EVENT(foo_template, foo_with_template_simple,
527 TP_PROTO(const char *foo, int bar),
528 TP_ARGS(foo, bar));
529
530DEFINE_EVENT_CONDITION(foo_template, foo_with_template_cond,
531 TP_PROTO(const char *foo, int bar),
532 TP_ARGS(foo, bar),
533 TP_CONDITION(!(bar % 8)));
534
535
536DEFINE_EVENT_FN(foo_template, foo_with_template_fn,
537 TP_PROTO(const char *foo, int bar),
538 TP_ARGS(foo, bar),
539 foo_bar_reg, foo_bar_unreg);
540
541/*
542 * Anytime two events share basically the same values and have
543 * the same output, use the DECLARE_EVENT_CLASS() and DEFINE_EVENT()
544 * when ever possible.
545 */
546
547/*
548 * If the event is similar to the DECLARE_EVENT_CLASS, but you need
549 * to have a different output, then use DEFINE_EVENT_PRINT() which
550 * lets you override the TP_printk() of the class.
551 */
552
553DEFINE_EVENT_PRINT(foo_template, foo_with_template_print,
554 TP_PROTO(const char *foo, int bar),
555 TP_ARGS(foo, bar),
556 TP_printk("bar %s %d", __get_str(foo), __entry->bar));
557
558/*
559 * There are yet another __rel_loc dynamic data attribute. If you
560 * use __rel_dynamic_array() and __rel_string() etc. macros, you
561 * can use this attribute. There is no difference from the viewpoint
562 * of functionality with/without 'rel' but the encoding is a bit
563 * different. This is expected to be used with user-space event,
564 * there is no reason that the kernel event use this, but only for
565 * testing.
566 */
567
568TRACE_EVENT(foo_rel_loc,
569
570 TP_PROTO(const char *foo, int bar, unsigned long *mask, const cpumask_t *cpus),
571
572 TP_ARGS(foo, bar, mask, cpus),
573
574 TP_STRUCT__entry(
575 __rel_string( foo, foo )
576 __field( int, bar )
577 __rel_bitmask( bitmask,
578 BITS_PER_BYTE * sizeof(unsigned long) )
579 __rel_cpumask( cpumask )
580 ),
581
582 TP_fast_assign(
583 __assign_rel_str(foo);
584 __entry->bar = bar;
585 __assign_rel_bitmask(bitmask, mask,
586 BITS_PER_BYTE * sizeof(unsigned long));
587 __assign_rel_cpumask(cpumask, cpus);
588 ),
589
590 TP_printk("foo_rel_loc %s, %d, %s, %s", __get_rel_str(foo), __entry->bar,
591 __get_rel_bitmask(bitmask),
592 __get_rel_cpumask(cpumask))
593);
594#endif
595
596/***** NOTICE! The #if protection ends here. *****/
597
598
599/*
600 * There are several ways I could have done this. If I left out the
601 * TRACE_INCLUDE_PATH, then it would default to the kernel source
602 * include/trace/events directory.
603 *
604 * I could specify a path from the define_trace.h file back to this
605 * file.
606 *
607 * #define TRACE_INCLUDE_PATH ../../samples/trace_events
608 *
609 * But the safest and easiest way to simply make it use the directory
610 * that the file is in is to add in the Makefile:
611 *
612 * CFLAGS_trace-events-sample.o := -I$(src)
613 *
614 * This will make sure the current path is part of the include
615 * structure for our file so that define_trace.h can find it.
616 *
617 * I could have made only the top level directory the include:
618 *
619 * CFLAGS_trace-events-sample.o := -I$(PWD)
620 *
621 * And then let the path to this directory be the TRACE_INCLUDE_PATH:
622 *
623 * #define TRACE_INCLUDE_PATH samples/trace_events
624 *
625 * But then if something defines "samples" or "trace_events" as a macro
626 * then we could risk that being converted too, and give us an unexpected
627 * result.
628 */
629#undef TRACE_INCLUDE_PATH
630#undef TRACE_INCLUDE_FILE
631#define TRACE_INCLUDE_PATH .
632/*
633 * TRACE_INCLUDE_FILE is not needed if the filename and TRACE_SYSTEM are equal
634 */
635#define TRACE_INCLUDE_FILE trace-events-sample
636#include <trace/define_trace.h>
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * If TRACE_SYSTEM is defined, that will be the directory created
4 * in the ftrace directory under /sys/kernel/tracing/events/<system>
5 *
6 * The define_trace.h below will also look for a file name of
7 * TRACE_SYSTEM.h where TRACE_SYSTEM is what is defined here.
8 * In this case, it would look for sample-trace.h
9 *
10 * If the header name will be different than the system name
11 * (as in this case), then you can override the header name that
12 * define_trace.h will look up by defining TRACE_INCLUDE_FILE
13 *
14 * This file is called trace-events-sample.h but we want the system
15 * to be called "sample-trace". Therefore we must define the name of this
16 * file:
17 *
18 * #define TRACE_INCLUDE_FILE trace-events-sample
19 *
20 * As we do an the bottom of this file.
21 *
22 * Notice that TRACE_SYSTEM should be defined outside of #if
23 * protection, just like TRACE_INCLUDE_FILE.
24 */
25#undef TRACE_SYSTEM
26#define TRACE_SYSTEM sample-trace
27
28/*
29 * TRACE_SYSTEM is expected to be a C valid variable (alpha-numeric
30 * and underscore), although it may start with numbers. If for some
31 * reason it is not, you need to add the following lines:
32 */
33#undef TRACE_SYSTEM_VAR
34#define TRACE_SYSTEM_VAR sample_trace
35/*
36 * But the above is only needed if TRACE_SYSTEM is not alpha-numeric
37 * and underscored. By default, TRACE_SYSTEM_VAR will be equal to
38 * TRACE_SYSTEM. As TRACE_SYSTEM_VAR must be alpha-numeric, if
39 * TRACE_SYSTEM is not, then TRACE_SYSTEM_VAR must be defined with
40 * only alpha-numeric and underscores.
41 *
42 * The TRACE_SYSTEM_VAR is only used internally and not visible to
43 * user space.
44 */
45
46/*
47 * Notice that this file is not protected like a normal header.
48 * We also must allow for rereading of this file. The
49 *
50 * || defined(TRACE_HEADER_MULTI_READ)
51 *
52 * serves this purpose.
53 */
54#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
55#define _TRACE_EVENT_SAMPLE_H
56
57/*
58 * All trace headers should include tracepoint.h, until we finally
59 * make it into a standard header.
60 */
61#include <linux/tracepoint.h>
62
63/*
64 * The TRACE_EVENT macro is broken up into 5 parts.
65 *
66 * name: name of the trace point. This is also how to enable the tracepoint.
67 * A function called trace_foo_bar() will be created.
68 *
69 * proto: the prototype of the function trace_foo_bar()
70 * Here it is trace_foo_bar(char *foo, int bar).
71 *
72 * args: must match the arguments in the prototype.
73 * Here it is simply "foo, bar".
74 *
75 * struct: This defines the way the data will be stored in the ring buffer.
76 * The items declared here become part of a special structure
77 * called "__entry", which can be used in the fast_assign part of the
78 * TRACE_EVENT macro.
79 *
80 * Here are the currently defined types you can use:
81 *
82 * __field : Is broken up into type and name. Where type can be any
83 * primitive type (integer, long or pointer).
84 *
85 * __field(int, foo)
86 *
87 * __entry->foo = 5;
88 *
89 * __field_struct : This can be any static complex data type (struct, union
90 * but not an array). Be careful using complex types, as each
91 * event is limited in size, and copying large amounts of data
92 * into the ring buffer can slow things down.
93 *
94 * __field_struct(struct bar, foo)
95 *
96 * __entry->bar.x = y;
97
98 * __array: There are three fields (type, name, size). The type is the
99 * type of elements in the array, the name is the name of the array.
100 * size is the number of items in the array (not the total size).
101 *
102 * __array( char, foo, 10) is the same as saying: char foo[10];
103 *
104 * Assigning arrays can be done like any array:
105 *
106 * __entry->foo[0] = 'a';
107 *
108 * memcpy(__entry->foo, bar, 10);
109 *
110 * __dynamic_array: This is similar to array, but can vary its size from
111 * instance to instance of the tracepoint being called.
112 * Like __array, this too has three elements (type, name, size);
113 * type is the type of the element, name is the name of the array.
114 * The size is different than __array. It is not a static number,
115 * but the algorithm to figure out the length of the array for the
116 * specific instance of tracepoint. Again, size is the number of
117 * items in the array, not the total length in bytes.
118 *
119 * __dynamic_array( int, foo, bar) is similar to: int foo[bar];
120 *
121 * Note, unlike arrays, you must use the __get_dynamic_array() macro
122 * to access the array.
123 *
124 * memcpy(__get_dynamic_array(foo), bar, 10);
125 *
126 * Notice, that "__entry" is not needed here.
127 *
128 * __string: This is a special kind of __dynamic_array. It expects to
129 * have a null terminated character array passed to it (it allows
130 * for NULL too, which would be converted into "(null)"). __string
131 * takes two parameter (name, src), where name is the name of
132 * the string saved, and src is the string to copy into the
133 * ring buffer.
134 *
135 * __string(foo, bar) is similar to: strcpy(foo, bar)
136 *
137 * To assign a string, use the helper macro __assign_str().
138 *
139 * __assign_str(foo, bar);
140 *
141 * In most cases, the __assign_str() macro will take the same
142 * parameters as the __string() macro had to declare the string.
143 *
144 * __bitmask: This is another kind of __dynamic_array, but it expects
145 * an array of longs, and the number of bits to parse. It takes
146 * two parameters (name, nr_bits), where name is the name of the
147 * bitmask to save, and the nr_bits is the number of bits to record.
148 *
149 * __bitmask(target_cpu, nr_cpumask_bits)
150 *
151 * To assign a bitmask, use the __assign_bitmask() helper macro.
152 *
153 * __assign_bitmask(target_cpus, cpumask_bits(bar), nr_cpumask_bits);
154 *
155 *
156 * fast_assign: This is a C like function that is used to store the items
157 * into the ring buffer. A special variable called "__entry" will be the
158 * structure that points into the ring buffer and has the same fields as
159 * described by the struct part of TRACE_EVENT above.
160 *
161 * printk: This is a way to print out the data in pretty print. This is
162 * useful if the system crashes and you are logging via a serial line,
163 * the data can be printed to the console using this "printk" method.
164 * This is also used to print out the data from the trace files.
165 * Again, the __entry macro is used to access the data from the ring buffer.
166 *
167 * Note, __dynamic_array, __string, and __bitmask require special helpers
168 * to access the data.
169 *
170 * For __dynamic_array(int, foo, bar) use __get_dynamic_array(foo)
171 * Use __get_dynamic_array_len(foo) to get the length of the array
172 * saved. Note, __get_dynamic_array_len() returns the total allocated
173 * length of the dynamic array; __print_array() expects the second
174 * parameter to be the number of elements. To get that, the array length
175 * needs to be divided by the element size.
176 *
177 * For __string(foo, bar) use __get_str(foo)
178 *
179 * For __bitmask(target_cpus, nr_cpumask_bits) use __get_bitmask(target_cpus)
180 *
181 *
182 * Note, that for both the assign and the printk, __entry is the handler
183 * to the data structure in the ring buffer, and is defined by the
184 * TP_STRUCT__entry.
185 */
186
187/*
188 * It is OK to have helper functions in the file, but they need to be protected
189 * from being defined more than once. Remember, this file gets included more
190 * than once.
191 */
192#ifndef __TRACE_EVENT_SAMPLE_HELPER_FUNCTIONS
193#define __TRACE_EVENT_SAMPLE_HELPER_FUNCTIONS
194static inline int __length_of(const int *list)
195{
196 int i;
197
198 if (!list)
199 return 0;
200
201 for (i = 0; list[i]; i++)
202 ;
203 return i;
204}
205
206enum {
207 TRACE_SAMPLE_FOO = 2,
208 TRACE_SAMPLE_BAR = 4,
209 TRACE_SAMPLE_ZOO = 8,
210};
211#endif
212
213/*
214 * If enums are used in the TP_printk(), their names will be shown in
215 * format files and not their values. This can cause problems with user
216 * space programs that parse the format files to know how to translate
217 * the raw binary trace output into human readable text.
218 *
219 * To help out user space programs, any enum that is used in the TP_printk()
220 * should be defined by TRACE_DEFINE_ENUM() macro. All that is needed to
221 * be done is to add this macro with the enum within it in the trace
222 * header file, and it will be converted in the output.
223 */
224
225TRACE_DEFINE_ENUM(TRACE_SAMPLE_FOO);
226TRACE_DEFINE_ENUM(TRACE_SAMPLE_BAR);
227TRACE_DEFINE_ENUM(TRACE_SAMPLE_ZOO);
228
229TRACE_EVENT(foo_bar,
230
231 TP_PROTO(const char *foo, int bar, const int *lst,
232 const char *string, const struct cpumask *mask),
233
234 TP_ARGS(foo, bar, lst, string, mask),
235
236 TP_STRUCT__entry(
237 __array( char, foo, 10 )
238 __field( int, bar )
239 __dynamic_array(int, list, __length_of(lst))
240 __string( str, string )
241 __bitmask( cpus, num_possible_cpus() )
242 ),
243
244 TP_fast_assign(
245 strlcpy(__entry->foo, foo, 10);
246 __entry->bar = bar;
247 memcpy(__get_dynamic_array(list), lst,
248 __length_of(lst) * sizeof(int));
249 __assign_str(str, string);
250 __assign_bitmask(cpus, cpumask_bits(mask), num_possible_cpus());
251 ),
252
253 TP_printk("foo %s %d %s %s %s %s (%s)", __entry->foo, __entry->bar,
254
255/*
256 * Notice here the use of some helper functions. This includes:
257 *
258 * __print_symbolic( variable, { value, "string" }, ... ),
259 *
260 * The variable is tested against each value of the { } pair. If
261 * the variable matches one of the values, then it will print the
262 * string in that pair. If non are matched, it returns a string
263 * version of the number (if __entry->bar == 7 then "7" is returned).
264 */
265 __print_symbolic(__entry->bar,
266 { 0, "zero" },
267 { TRACE_SAMPLE_FOO, "TWO" },
268 { TRACE_SAMPLE_BAR, "FOUR" },
269 { TRACE_SAMPLE_ZOO, "EIGHT" },
270 { 10, "TEN" }
271 ),
272
273/*
274 * __print_flags( variable, "delim", { value, "flag" }, ... ),
275 *
276 * This is similar to __print_symbolic, except that it tests the bits
277 * of the value. If ((FLAG & variable) == FLAG) then the string is
278 * printed. If more than one flag matches, then each one that does is
279 * also printed with delim in between them.
280 * If not all bits are accounted for, then the not found bits will be
281 * added in hex format: 0x506 will show BIT2|BIT4|0x500
282 */
283 __print_flags(__entry->bar, "|",
284 { 1, "BIT1" },
285 { 2, "BIT2" },
286 { 4, "BIT3" },
287 { 8, "BIT4" }
288 ),
289/*
290 * __print_array( array, len, element_size )
291 *
292 * This prints out the array that is defined by __array in a nice format.
293 */
294 __print_array(__get_dynamic_array(list),
295 __get_dynamic_array_len(list) / sizeof(int),
296 sizeof(int)),
297 __get_str(str), __get_bitmask(cpus))
298);
299
300/*
301 * There may be a case where a tracepoint should only be called if
302 * some condition is set. Otherwise the tracepoint should not be called.
303 * But to do something like:
304 *
305 * if (cond)
306 * trace_foo();
307 *
308 * Would cause a little overhead when tracing is not enabled, and that
309 * overhead, even if small, is not something we want. As tracepoints
310 * use static branch (aka jump_labels), where no branch is taken to
311 * skip the tracepoint when not enabled, and a jmp is placed to jump
312 * to the tracepoint code when it is enabled, having a if statement
313 * nullifies that optimization. It would be nice to place that
314 * condition within the static branch. This is where TRACE_EVENT_CONDITION
315 * comes in.
316 *
317 * TRACE_EVENT_CONDITION() is just like TRACE_EVENT, except it adds another
318 * parameter just after args. Where TRACE_EVENT has:
319 *
320 * TRACE_EVENT(name, proto, args, struct, assign, printk)
321 *
322 * the CONDITION version has:
323 *
324 * TRACE_EVENT_CONDITION(name, proto, args, cond, struct, assign, printk)
325 *
326 * Everything is the same as TRACE_EVENT except for the new cond. Think
327 * of the cond variable as:
328 *
329 * if (cond)
330 * trace_foo_bar_with_cond();
331 *
332 * Except that the logic for the if branch is placed after the static branch.
333 * That is, the if statement that processes the condition will not be
334 * executed unless that traecpoint is enabled. Otherwise it still remains
335 * a nop.
336 */
337TRACE_EVENT_CONDITION(foo_bar_with_cond,
338
339 TP_PROTO(const char *foo, int bar),
340
341 TP_ARGS(foo, bar),
342
343 TP_CONDITION(!(bar % 10)),
344
345 TP_STRUCT__entry(
346 __string( foo, foo )
347 __field( int, bar )
348 ),
349
350 TP_fast_assign(
351 __assign_str(foo, foo);
352 __entry->bar = bar;
353 ),
354
355 TP_printk("foo %s %d", __get_str(foo), __entry->bar)
356);
357
358int foo_bar_reg(void);
359void foo_bar_unreg(void);
360
361/*
362 * Now in the case that some function needs to be called when the
363 * tracepoint is enabled and/or when it is disabled, the
364 * TRACE_EVENT_FN() serves this purpose. This is just like TRACE_EVENT()
365 * but adds two more parameters at the end:
366 *
367 * TRACE_EVENT_FN( name, proto, args, struct, assign, printk, reg, unreg)
368 *
369 * reg and unreg are functions with the prototype of:
370 *
371 * void reg(void)
372 *
373 * The reg function gets called before the tracepoint is enabled, and
374 * the unreg function gets called after the tracepoint is disabled.
375 *
376 * Note, reg and unreg are allowed to be NULL. If you only need to
377 * call a function before enabling, or after disabling, just set one
378 * function and pass in NULL for the other parameter.
379 */
380TRACE_EVENT_FN(foo_bar_with_fn,
381
382 TP_PROTO(const char *foo, int bar),
383
384 TP_ARGS(foo, bar),
385
386 TP_STRUCT__entry(
387 __string( foo, foo )
388 __field( int, bar )
389 ),
390
391 TP_fast_assign(
392 __assign_str(foo, foo);
393 __entry->bar = bar;
394 ),
395
396 TP_printk("foo %s %d", __get_str(foo), __entry->bar),
397
398 foo_bar_reg, foo_bar_unreg
399);
400
401/*
402 * Each TRACE_EVENT macro creates several helper functions to produce
403 * the code to add the tracepoint, create the files in the trace
404 * directory, hook it to perf, assign the values and to print out
405 * the raw data from the ring buffer. To prevent too much bloat,
406 * if there are more than one tracepoint that uses the same format
407 * for the proto, args, struct, assign and printk, and only the name
408 * is different, it is highly recommended to use the DECLARE_EVENT_CLASS
409 *
410 * DECLARE_EVENT_CLASS() macro creates most of the functions for the
411 * tracepoint. Then DEFINE_EVENT() is use to hook a tracepoint to those
412 * functions. This DEFINE_EVENT() is an instance of the class and can
413 * be enabled and disabled separately from other events (either TRACE_EVENT
414 * or other DEFINE_EVENT()s).
415 *
416 * Note, TRACE_EVENT() itself is simply defined as:
417 *
418 * #define TRACE_EVENT(name, proto, args, tstruct, assign, printk) \
419 * DEFINE_EVENT_CLASS(name, proto, args, tstruct, assign, printk); \
420 * DEFINE_EVENT(name, name, proto, args)
421 *
422 * The DEFINE_EVENT() also can be declared with conditions and reg functions:
423 *
424 * DEFINE_EVENT_CONDITION(template, name, proto, args, cond);
425 * DEFINE_EVENT_FN(template, name, proto, args, reg, unreg);
426 */
427DECLARE_EVENT_CLASS(foo_template,
428
429 TP_PROTO(const char *foo, int bar),
430
431 TP_ARGS(foo, bar),
432
433 TP_STRUCT__entry(
434 __string( foo, foo )
435 __field( int, bar )
436 ),
437
438 TP_fast_assign(
439 __assign_str(foo, foo);
440 __entry->bar = bar;
441 ),
442
443 TP_printk("foo %s %d", __get_str(foo), __entry->bar)
444);
445
446/*
447 * Here's a better way for the previous samples (except, the first
448 * example had more fields and could not be used here).
449 */
450DEFINE_EVENT(foo_template, foo_with_template_simple,
451 TP_PROTO(const char *foo, int bar),
452 TP_ARGS(foo, bar));
453
454DEFINE_EVENT_CONDITION(foo_template, foo_with_template_cond,
455 TP_PROTO(const char *foo, int bar),
456 TP_ARGS(foo, bar),
457 TP_CONDITION(!(bar % 8)));
458
459
460DEFINE_EVENT_FN(foo_template, foo_with_template_fn,
461 TP_PROTO(const char *foo, int bar),
462 TP_ARGS(foo, bar),
463 foo_bar_reg, foo_bar_unreg);
464
465/*
466 * Anytime two events share basically the same values and have
467 * the same output, use the DECLARE_EVENT_CLASS() and DEFINE_EVENT()
468 * when ever possible.
469 */
470
471/*
472 * If the event is similar to the DECLARE_EVENT_CLASS, but you need
473 * to have a different output, then use DEFINE_EVENT_PRINT() which
474 * lets you override the TP_printk() of the class.
475 */
476
477DEFINE_EVENT_PRINT(foo_template, foo_with_template_print,
478 TP_PROTO(const char *foo, int bar),
479 TP_ARGS(foo, bar),
480 TP_printk("bar %s %d", __get_str(foo), __entry->bar));
481
482#endif
483
484/***** NOTICE! The #if protection ends here. *****/
485
486
487/*
488 * There are several ways I could have done this. If I left out the
489 * TRACE_INCLUDE_PATH, then it would default to the kernel source
490 * include/trace/events directory.
491 *
492 * I could specify a path from the define_trace.h file back to this
493 * file.
494 *
495 * #define TRACE_INCLUDE_PATH ../../samples/trace_events
496 *
497 * But the safest and easiest way to simply make it use the directory
498 * that the file is in is to add in the Makefile:
499 *
500 * CFLAGS_trace-events-sample.o := -I$(src)
501 *
502 * This will make sure the current path is part of the include
503 * structure for our file so that define_trace.h can find it.
504 *
505 * I could have made only the top level directory the include:
506 *
507 * CFLAGS_trace-events-sample.o := -I$(PWD)
508 *
509 * And then let the path to this directory be the TRACE_INCLUDE_PATH:
510 *
511 * #define TRACE_INCLUDE_PATH samples/trace_events
512 *
513 * But then if something defines "samples" or "trace_events" as a macro
514 * then we could risk that being converted too, and give us an unexpected
515 * result.
516 */
517#undef TRACE_INCLUDE_PATH
518#undef TRACE_INCLUDE_FILE
519#define TRACE_INCLUDE_PATH .
520/*
521 * TRACE_INCLUDE_FILE is not needed if the filename and TRACE_SYSTEM are equal
522 */
523#define TRACE_INCLUDE_FILE trace-events-sample
524#include <trace/define_trace.h>