Linux Audio

Check our new training course

Loading...
v6.13.7
  1/* SPDX-License-Identifier: GPL-2.0 */
  2/*
  3 * udc.h - ChipIdea UDC structures
  4 *
  5 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  6 *
  7 * Author: David Lopo
  8 */
  9
 10#ifndef __DRIVERS_USB_CHIPIDEA_UDC_H
 11#define __DRIVERS_USB_CHIPIDEA_UDC_H
 12
 13#include <linux/list.h>
 14
 15#define CTRL_PAYLOAD_MAX   64
 16#define RX        0  /* similar to USB_DIR_OUT but can be used as an index */
 17#define TX        1  /* similar to USB_DIR_IN  but can be used as an index */
 18
 19/* DMA layout of transfer descriptors */
 20struct ci_hw_td {
 21	/* 0 */
 22	__le32 next;
 23#define TD_TERMINATE          BIT(0)
 24#define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
 25	/* 1 */
 26	__le32 token;
 27#define TD_STATUS             (0x00FFUL <<  0)
 28#define TD_STATUS_TR_ERR      BIT(3)
 29#define TD_STATUS_DT_ERR      BIT(5)
 30#define TD_STATUS_HALTED      BIT(6)
 31#define TD_STATUS_ACTIVE      BIT(7)
 32#define TD_MULTO              (0x0003UL << 10)
 33#define TD_IOC                BIT(15)
 34#define TD_TOTAL_BYTES        (0x7FFFUL << 16)
 35	/* 2 */
 36	__le32 page[5];
 37#define TD_CURR_OFFSET        (0x0FFFUL <<  0)
 38#define TD_FRAME_NUM          (0x07FFUL <<  0)
 39#define TD_RESERVED_MASK      (0x0FFFUL <<  0)
 40} __attribute__ ((packed, aligned(4)));
 41
 42/* DMA layout of queue heads */
 43struct ci_hw_qh {
 44	/* 0 */
 45	__le32 cap;
 46#define QH_IOS                BIT(15)
 47#define QH_MAX_PKT            (0x07FFUL << 16)
 48#define QH_ZLT                BIT(29)
 49#define QH_MULT               (0x0003UL << 30)
 50#define QH_ISO_MULT(x)		((x >> 11) & 0x03)
 51	/* 1 */
 52	__le32 curr;
 53	/* 2 - 8 */
 54	struct ci_hw_td		td;
 55	/* 9 */
 56	__le32 RESERVED;
 57	struct usb_ctrlrequest   setup;
 58} __attribute__ ((packed, aligned(4)));
 59
 60struct td_node {
 61	struct list_head	td;
 62	dma_addr_t		dma;
 63	struct ci_hw_td		*ptr;
 64	int			td_remaining_size;
 65};
 66
 67/**
 68 * struct ci_hw_req - usb request representation
 69 * @req: request structure for gadget drivers
 70 * @queue: link to QH list
 71 * @tds: link to TD list
 72 * @sgt: hold original sglist when bounce sglist
 
 
 73 */
 74struct ci_hw_req {
 75	struct usb_request	req;
 76	struct list_head	queue;
 77	struct list_head	tds;
 78	struct sg_table		sgt;
 79};
 80
 81#ifdef CONFIG_USB_CHIPIDEA_UDC
 82
 83int ci_hdrc_gadget_init(struct ci_hdrc *ci);
 84void ci_hdrc_gadget_destroy(struct ci_hdrc *ci);
 85
 86#else
 87
 88static inline int ci_hdrc_gadget_init(struct ci_hdrc *ci)
 89{
 90	return -ENXIO;
 91}
 92
 93static inline void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
 94{
 95
 96}
 97
 98#endif
 99
100#endif /* __DRIVERS_USB_CHIPIDEA_UDC_H */
v5.4
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * udc.h - ChipIdea UDC structures
  4 *
  5 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  6 *
  7 * Author: David Lopo
  8 */
  9
 10#ifndef __DRIVERS_USB_CHIPIDEA_UDC_H
 11#define __DRIVERS_USB_CHIPIDEA_UDC_H
 12
 13#include <linux/list.h>
 14
 15#define CTRL_PAYLOAD_MAX   64
 16#define RX        0  /* similar to USB_DIR_OUT but can be used as an index */
 17#define TX        1  /* similar to USB_DIR_IN  but can be used as an index */
 18
 19/* DMA layout of transfer descriptors */
 20struct ci_hw_td {
 21	/* 0 */
 22	__le32 next;
 23#define TD_TERMINATE          BIT(0)
 24#define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
 25	/* 1 */
 26	__le32 token;
 27#define TD_STATUS             (0x00FFUL <<  0)
 28#define TD_STATUS_TR_ERR      BIT(3)
 29#define TD_STATUS_DT_ERR      BIT(5)
 30#define TD_STATUS_HALTED      BIT(6)
 31#define TD_STATUS_ACTIVE      BIT(7)
 32#define TD_MULTO              (0x0003UL << 10)
 33#define TD_IOC                BIT(15)
 34#define TD_TOTAL_BYTES        (0x7FFFUL << 16)
 35	/* 2 */
 36	__le32 page[5];
 37#define TD_CURR_OFFSET        (0x0FFFUL <<  0)
 38#define TD_FRAME_NUM          (0x07FFUL <<  0)
 39#define TD_RESERVED_MASK      (0x0FFFUL <<  0)
 40} __attribute__ ((packed, aligned(4)));
 41
 42/* DMA layout of queue heads */
 43struct ci_hw_qh {
 44	/* 0 */
 45	__le32 cap;
 46#define QH_IOS                BIT(15)
 47#define QH_MAX_PKT            (0x07FFUL << 16)
 48#define QH_ZLT                BIT(29)
 49#define QH_MULT               (0x0003UL << 30)
 50#define QH_ISO_MULT(x)		((x >> 11) & 0x03)
 51	/* 1 */
 52	__le32 curr;
 53	/* 2 - 8 */
 54	struct ci_hw_td		td;
 55	/* 9 */
 56	__le32 RESERVED;
 57	struct usb_ctrlrequest   setup;
 58} __attribute__ ((packed, aligned(4)));
 59
 60struct td_node {
 61	struct list_head	td;
 62	dma_addr_t		dma;
 63	struct ci_hw_td		*ptr;
 
 64};
 65
 66/**
 67 * struct ci_hw_req - usb request representation
 68 * @req: request structure for gadget drivers
 69 * @queue: link to QH list
 70 * @ptr: transfer descriptor for this request
 71 * @dma: dma address for the transfer descriptor
 72 * @zptr: transfer descriptor for the zero packet
 73 * @zdma: dma address of the zero packet's transfer descriptor
 74 */
 75struct ci_hw_req {
 76	struct usb_request	req;
 77	struct list_head	queue;
 78	struct list_head	tds;
 
 79};
 80
 81#ifdef CONFIG_USB_CHIPIDEA_UDC
 82
 83int ci_hdrc_gadget_init(struct ci_hdrc *ci);
 84void ci_hdrc_gadget_destroy(struct ci_hdrc *ci);
 85
 86#else
 87
 88static inline int ci_hdrc_gadget_init(struct ci_hdrc *ci)
 89{
 90	return -ENXIO;
 91}
 92
 93static inline void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
 94{
 95
 96}
 97
 98#endif
 99
100#endif /* __DRIVERS_USB_CHIPIDEA_UDC_H */