Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Based on meson_uart.c, by AMLOGIC, INC.
4 *
5 * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
6 */
7
8#include <linux/clk.h>
9#include <linux/console.h>
10#include <linux/delay.h>
11#include <linux/init.h>
12#include <linux/io.h>
13#include <linux/iopoll.h>
14#include <linux/module.h>
15#include <linux/kernel.h>
16#include <linux/of.h>
17#include <linux/platform_device.h>
18#include <linux/serial.h>
19#include <linux/serial_core.h>
20#include <linux/tty.h>
21#include <linux/tty_flip.h>
22
23/* Register offsets */
24#define AML_UART_WFIFO 0x00
25#define AML_UART_RFIFO 0x04
26#define AML_UART_CONTROL 0x08
27#define AML_UART_STATUS 0x0c
28#define AML_UART_MISC 0x10
29#define AML_UART_REG5 0x14
30
31/* AML_UART_CONTROL bits */
32#define AML_UART_TX_EN BIT(12)
33#define AML_UART_RX_EN BIT(13)
34#define AML_UART_TWO_WIRE_EN BIT(15)
35#define AML_UART_STOP_BIT_LEN_MASK (0x03 << 16)
36#define AML_UART_STOP_BIT_1SB (0x00 << 16)
37#define AML_UART_STOP_BIT_2SB (0x01 << 16)
38#define AML_UART_PARITY_TYPE BIT(18)
39#define AML_UART_PARITY_EN BIT(19)
40#define AML_UART_TX_RST BIT(22)
41#define AML_UART_RX_RST BIT(23)
42#define AML_UART_CLEAR_ERR BIT(24)
43#define AML_UART_RX_INT_EN BIT(27)
44#define AML_UART_TX_INT_EN BIT(28)
45#define AML_UART_DATA_LEN_MASK (0x03 << 20)
46#define AML_UART_DATA_LEN_8BIT (0x00 << 20)
47#define AML_UART_DATA_LEN_7BIT (0x01 << 20)
48#define AML_UART_DATA_LEN_6BIT (0x02 << 20)
49#define AML_UART_DATA_LEN_5BIT (0x03 << 20)
50
51/* AML_UART_STATUS bits */
52#define AML_UART_PARITY_ERR BIT(16)
53#define AML_UART_FRAME_ERR BIT(17)
54#define AML_UART_TX_FIFO_WERR BIT(18)
55#define AML_UART_RX_EMPTY BIT(20)
56#define AML_UART_TX_FULL BIT(21)
57#define AML_UART_TX_EMPTY BIT(22)
58#define AML_UART_XMIT_BUSY BIT(25)
59#define AML_UART_ERR (AML_UART_PARITY_ERR | \
60 AML_UART_FRAME_ERR | \
61 AML_UART_TX_FIFO_WERR)
62
63/* AML_UART_MISC bits */
64#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8)
65#define AML_UART_RECV_IRQ(c) ((c) & 0xff)
66
67/* AML_UART_REG5 bits */
68#define AML_UART_BAUD_MASK 0x7fffff
69#define AML_UART_BAUD_USE BIT(23)
70#define AML_UART_BAUD_XTAL BIT(24)
71#define AML_UART_BAUD_XTAL_DIV2 BIT(27)
72
73#define AML_UART_PORT_NUM 12
74#define AML_UART_PORT_OFFSET 6
75
76#define AML_UART_POLL_USEC 5
77#define AML_UART_TIMEOUT_USEC 10000
78
79static struct uart_driver meson_uart_driver_ttyAML;
80static struct uart_driver meson_uart_driver_ttyS;
81
82static struct uart_port *meson_ports[AML_UART_PORT_NUM];
83
84struct meson_uart_data {
85 struct uart_driver *uart_driver;
86 bool has_xtal_div2;
87};
88
89static void meson_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
90{
91}
92
93static unsigned int meson_uart_get_mctrl(struct uart_port *port)
94{
95 return TIOCM_CTS;
96}
97
98static unsigned int meson_uart_tx_empty(struct uart_port *port)
99{
100 u32 val;
101
102 val = readl(port->membase + AML_UART_STATUS);
103 val &= (AML_UART_TX_EMPTY | AML_UART_XMIT_BUSY);
104 return (val == AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0;
105}
106
107static void meson_uart_stop_tx(struct uart_port *port)
108{
109 u32 val;
110
111 val = readl(port->membase + AML_UART_CONTROL);
112 val &= ~AML_UART_TX_INT_EN;
113 writel(val, port->membase + AML_UART_CONTROL);
114}
115
116static void meson_uart_stop_rx(struct uart_port *port)
117{
118 u32 val;
119
120 val = readl(port->membase + AML_UART_CONTROL);
121 val &= ~AML_UART_RX_EN;
122 writel(val, port->membase + AML_UART_CONTROL);
123}
124
125static void meson_uart_shutdown(struct uart_port *port)
126{
127 unsigned long flags;
128 u32 val;
129
130 free_irq(port->irq, port);
131
132 uart_port_lock_irqsave(port, &flags);
133
134 val = readl(port->membase + AML_UART_CONTROL);
135 val &= ~AML_UART_RX_EN;
136 val &= ~(AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
137 writel(val, port->membase + AML_UART_CONTROL);
138
139 uart_port_unlock_irqrestore(port, flags);
140}
141
142static void meson_uart_start_tx(struct uart_port *port)
143{
144 struct tty_port *tport = &port->state->port;
145 unsigned char ch;
146 u32 val;
147
148 if (uart_tx_stopped(port)) {
149 meson_uart_stop_tx(port);
150 return;
151 }
152
153 while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
154 if (port->x_char) {
155 writel(port->x_char, port->membase + AML_UART_WFIFO);
156 port->icount.tx++;
157 port->x_char = 0;
158 continue;
159 }
160
161 if (!uart_fifo_get(port, &ch))
162 break;
163
164 writel(ch, port->membase + AML_UART_WFIFO);
165 }
166
167 if (!kfifo_is_empty(&tport->xmit_fifo)) {
168 val = readl(port->membase + AML_UART_CONTROL);
169 val |= AML_UART_TX_INT_EN;
170 writel(val, port->membase + AML_UART_CONTROL);
171 }
172
173 if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
174 uart_write_wakeup(port);
175}
176
177static void meson_receive_chars(struct uart_port *port)
178{
179 struct tty_port *tport = &port->state->port;
180 char flag;
181 u32 ostatus, status, ch, mode;
182
183 do {
184 flag = TTY_NORMAL;
185 port->icount.rx++;
186 ostatus = status = readl(port->membase + AML_UART_STATUS);
187
188 if (status & AML_UART_ERR) {
189 if (status & AML_UART_TX_FIFO_WERR)
190 port->icount.overrun++;
191 else if (status & AML_UART_FRAME_ERR)
192 port->icount.frame++;
193 else if (status & AML_UART_PARITY_ERR)
194 port->icount.frame++;
195
196 mode = readl(port->membase + AML_UART_CONTROL);
197 mode |= AML_UART_CLEAR_ERR;
198 writel(mode, port->membase + AML_UART_CONTROL);
199
200 /* It doesn't clear to 0 automatically */
201 mode &= ~AML_UART_CLEAR_ERR;
202 writel(mode, port->membase + AML_UART_CONTROL);
203
204 status &= port->read_status_mask;
205 if (status & AML_UART_FRAME_ERR)
206 flag = TTY_FRAME;
207 else if (status & AML_UART_PARITY_ERR)
208 flag = TTY_PARITY;
209 }
210
211 ch = readl(port->membase + AML_UART_RFIFO);
212 ch &= 0xff;
213
214 if ((ostatus & AML_UART_FRAME_ERR) && (ch == 0)) {
215 port->icount.brk++;
216 flag = TTY_BREAK;
217 if (uart_handle_break(port))
218 continue;
219 }
220
221 if (uart_prepare_sysrq_char(port, ch))
222 continue;
223
224 if ((status & port->ignore_status_mask) == 0)
225 tty_insert_flip_char(tport, ch, flag);
226
227 if (status & AML_UART_TX_FIFO_WERR)
228 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
229
230 } while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY));
231
232 tty_flip_buffer_push(tport);
233}
234
235static irqreturn_t meson_uart_interrupt(int irq, void *dev_id)
236{
237 struct uart_port *port = (struct uart_port *)dev_id;
238
239 uart_port_lock(port);
240
241 if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY))
242 meson_receive_chars(port);
243
244 if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
245 if (readl(port->membase + AML_UART_CONTROL) & AML_UART_TX_INT_EN)
246 meson_uart_start_tx(port);
247 }
248
249 uart_unlock_and_check_sysrq(port);
250
251 return IRQ_HANDLED;
252}
253
254static const char *meson_uart_type(struct uart_port *port)
255{
256 return (port->type == PORT_MESON) ? "meson_uart" : NULL;
257}
258
259/*
260 * This function is called only from probe() using a temporary io mapping
261 * in order to perform a reset before setting up the device. Since the
262 * temporarily mapped region was successfully requested, there can be no
263 * console on this port at this time. Hence it is not necessary for this
264 * function to acquire the port->lock. (Since there is no console on this
265 * port at this time, the port->lock is not initialized yet.)
266 */
267static void meson_uart_reset(struct uart_port *port)
268{
269 u32 val;
270
271 val = readl(port->membase + AML_UART_CONTROL);
272 val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR);
273 writel(val, port->membase + AML_UART_CONTROL);
274
275 val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR);
276 writel(val, port->membase + AML_UART_CONTROL);
277}
278
279static int meson_uart_startup(struct uart_port *port)
280{
281 unsigned long flags;
282 u32 val;
283 int ret = 0;
284
285 uart_port_lock_irqsave(port, &flags);
286
287 val = readl(port->membase + AML_UART_CONTROL);
288 val |= AML_UART_CLEAR_ERR;
289 writel(val, port->membase + AML_UART_CONTROL);
290 val &= ~AML_UART_CLEAR_ERR;
291 writel(val, port->membase + AML_UART_CONTROL);
292
293 val |= (AML_UART_RX_EN | AML_UART_TX_EN);
294 writel(val, port->membase + AML_UART_CONTROL);
295
296 val |= (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
297 writel(val, port->membase + AML_UART_CONTROL);
298
299 val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
300 writel(val, port->membase + AML_UART_MISC);
301
302 uart_port_unlock_irqrestore(port, flags);
303
304 ret = request_irq(port->irq, meson_uart_interrupt, 0,
305 port->name, port);
306
307 return ret;
308}
309
310static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
311{
312 const struct meson_uart_data *private_data = port->private_data;
313 u32 val = 0;
314
315 while (!meson_uart_tx_empty(port))
316 cpu_relax();
317
318 if (port->uartclk == 24000000) {
319 unsigned int xtal_div = 3;
320
321 if (private_data && private_data->has_xtal_div2) {
322 xtal_div = 2;
323 val |= AML_UART_BAUD_XTAL_DIV2;
324 }
325 val |= DIV_ROUND_CLOSEST(port->uartclk / xtal_div, baud) - 1;
326 val |= AML_UART_BAUD_XTAL;
327 } else {
328 val = DIV_ROUND_CLOSEST(port->uartclk / 4, baud) - 1;
329 }
330 val |= AML_UART_BAUD_USE;
331 writel(val, port->membase + AML_UART_REG5);
332}
333
334static void meson_uart_set_termios(struct uart_port *port,
335 struct ktermios *termios,
336 const struct ktermios *old)
337{
338 unsigned int cflags, iflags, baud;
339 unsigned long flags;
340 u32 val;
341
342 uart_port_lock_irqsave(port, &flags);
343
344 cflags = termios->c_cflag;
345 iflags = termios->c_iflag;
346
347 val = readl(port->membase + AML_UART_CONTROL);
348
349 val &= ~AML_UART_DATA_LEN_MASK;
350 switch (cflags & CSIZE) {
351 case CS8:
352 val |= AML_UART_DATA_LEN_8BIT;
353 break;
354 case CS7:
355 val |= AML_UART_DATA_LEN_7BIT;
356 break;
357 case CS6:
358 val |= AML_UART_DATA_LEN_6BIT;
359 break;
360 case CS5:
361 val |= AML_UART_DATA_LEN_5BIT;
362 break;
363 }
364
365 if (cflags & PARENB)
366 val |= AML_UART_PARITY_EN;
367 else
368 val &= ~AML_UART_PARITY_EN;
369
370 if (cflags & PARODD)
371 val |= AML_UART_PARITY_TYPE;
372 else
373 val &= ~AML_UART_PARITY_TYPE;
374
375 val &= ~AML_UART_STOP_BIT_LEN_MASK;
376 if (cflags & CSTOPB)
377 val |= AML_UART_STOP_BIT_2SB;
378 else
379 val |= AML_UART_STOP_BIT_1SB;
380
381 if (cflags & CRTSCTS) {
382 if (port->flags & UPF_HARD_FLOW)
383 val &= ~AML_UART_TWO_WIRE_EN;
384 else
385 termios->c_cflag &= ~CRTSCTS;
386 } else {
387 val |= AML_UART_TWO_WIRE_EN;
388 }
389
390 writel(val, port->membase + AML_UART_CONTROL);
391
392 baud = uart_get_baud_rate(port, termios, old, 50, 4000000);
393 meson_uart_change_speed(port, baud);
394
395 port->read_status_mask = AML_UART_TX_FIFO_WERR;
396 if (iflags & INPCK)
397 port->read_status_mask |= AML_UART_PARITY_ERR |
398 AML_UART_FRAME_ERR;
399
400 port->ignore_status_mask = 0;
401 if (iflags & IGNPAR)
402 port->ignore_status_mask |= AML_UART_PARITY_ERR |
403 AML_UART_FRAME_ERR;
404
405 uart_update_timeout(port, termios->c_cflag, baud);
406 uart_port_unlock_irqrestore(port, flags);
407}
408
409static int meson_uart_verify_port(struct uart_port *port,
410 struct serial_struct *ser)
411{
412 int ret = 0;
413
414 if (port->type != PORT_MESON)
415 ret = -EINVAL;
416 if (port->irq != ser->irq)
417 ret = -EINVAL;
418 if (ser->baud_base < 9600)
419 ret = -EINVAL;
420 return ret;
421}
422
423static void meson_uart_release_port(struct uart_port *port)
424{
425 devm_iounmap(port->dev, port->membase);
426 port->membase = NULL;
427 devm_release_mem_region(port->dev, port->mapbase, port->mapsize);
428}
429
430static int meson_uart_request_port(struct uart_port *port)
431{
432 if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize,
433 dev_name(port->dev))) {
434 dev_err(port->dev, "Memory region busy\n");
435 return -EBUSY;
436 }
437
438 port->membase = devm_ioremap(port->dev, port->mapbase,
439 port->mapsize);
440 if (!port->membase)
441 return -ENOMEM;
442
443 return 0;
444}
445
446static void meson_uart_config_port(struct uart_port *port, int flags)
447{
448 if (flags & UART_CONFIG_TYPE) {
449 port->type = PORT_MESON;
450 meson_uart_request_port(port);
451 }
452}
453
454#ifdef CONFIG_CONSOLE_POLL
455/*
456 * Console polling routines for writing and reading from the uart while
457 * in an interrupt or debug context (i.e. kgdb).
458 */
459
460static int meson_uart_poll_get_char(struct uart_port *port)
461{
462 u32 c;
463 unsigned long flags;
464
465 uart_port_lock_irqsave(port, &flags);
466
467 if (readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)
468 c = NO_POLL_CHAR;
469 else
470 c = readl(port->membase + AML_UART_RFIFO);
471
472 uart_port_unlock_irqrestore(port, flags);
473
474 return c;
475}
476
477static void meson_uart_poll_put_char(struct uart_port *port, unsigned char c)
478{
479 unsigned long flags;
480 u32 reg;
481 int ret;
482
483 uart_port_lock_irqsave(port, &flags);
484
485 /* Wait until FIFO is empty or timeout */
486 ret = readl_poll_timeout_atomic(port->membase + AML_UART_STATUS, reg,
487 reg & AML_UART_TX_EMPTY,
488 AML_UART_POLL_USEC,
489 AML_UART_TIMEOUT_USEC);
490 if (ret == -ETIMEDOUT) {
491 dev_err(port->dev, "Timeout waiting for UART TX EMPTY\n");
492 goto out;
493 }
494
495 /* Write the character */
496 writel(c, port->membase + AML_UART_WFIFO);
497
498 /* Wait until FIFO is empty or timeout */
499 ret = readl_poll_timeout_atomic(port->membase + AML_UART_STATUS, reg,
500 reg & AML_UART_TX_EMPTY,
501 AML_UART_POLL_USEC,
502 AML_UART_TIMEOUT_USEC);
503 if (ret == -ETIMEDOUT)
504 dev_err(port->dev, "Timeout waiting for UART TX EMPTY\n");
505
506out:
507 uart_port_unlock_irqrestore(port, flags);
508}
509
510#endif /* CONFIG_CONSOLE_POLL */
511
512static const struct uart_ops meson_uart_ops = {
513 .set_mctrl = meson_uart_set_mctrl,
514 .get_mctrl = meson_uart_get_mctrl,
515 .tx_empty = meson_uart_tx_empty,
516 .start_tx = meson_uart_start_tx,
517 .stop_tx = meson_uart_stop_tx,
518 .stop_rx = meson_uart_stop_rx,
519 .startup = meson_uart_startup,
520 .shutdown = meson_uart_shutdown,
521 .set_termios = meson_uart_set_termios,
522 .type = meson_uart_type,
523 .config_port = meson_uart_config_port,
524 .request_port = meson_uart_request_port,
525 .release_port = meson_uart_release_port,
526 .verify_port = meson_uart_verify_port,
527#ifdef CONFIG_CONSOLE_POLL
528 .poll_get_char = meson_uart_poll_get_char,
529 .poll_put_char = meson_uart_poll_put_char,
530#endif
531};
532
533#ifdef CONFIG_SERIAL_MESON_CONSOLE
534static void meson_uart_enable_tx_engine(struct uart_port *port)
535{
536 u32 val;
537
538 val = readl(port->membase + AML_UART_CONTROL);
539 val |= AML_UART_TX_EN;
540 writel(val, port->membase + AML_UART_CONTROL);
541}
542
543static void meson_console_putchar(struct uart_port *port, unsigned char ch)
544{
545 if (!port->membase)
546 return;
547
548 while (readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)
549 cpu_relax();
550 writel(ch, port->membase + AML_UART_WFIFO);
551}
552
553static void meson_serial_port_write(struct uart_port *port, const char *s,
554 u_int count)
555{
556 unsigned long flags;
557 int locked = 1;
558 u32 val, tmp;
559
560 if (oops_in_progress)
561 locked = uart_port_trylock_irqsave(port, &flags);
562 else
563 uart_port_lock_irqsave(port, &flags);
564
565 val = readl(port->membase + AML_UART_CONTROL);
566 tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN);
567 writel(tmp, port->membase + AML_UART_CONTROL);
568
569 uart_console_write(port, s, count, meson_console_putchar);
570 writel(val, port->membase + AML_UART_CONTROL);
571
572 if (locked)
573 uart_port_unlock_irqrestore(port, flags);
574}
575
576static void meson_serial_console_write(struct console *co, const char *s,
577 u_int count)
578{
579 struct uart_port *port;
580
581 port = meson_ports[co->index];
582 if (!port)
583 return;
584
585 meson_serial_port_write(port, s, count);
586}
587
588static int meson_serial_console_setup(struct console *co, char *options)
589{
590 struct uart_port *port;
591 int baud = 115200;
592 int bits = 8;
593 int parity = 'n';
594 int flow = 'n';
595
596 if (co->index < 0 || co->index >= AML_UART_PORT_NUM)
597 return -EINVAL;
598
599 port = meson_ports[co->index];
600 if (!port || !port->membase)
601 return -ENODEV;
602
603 meson_uart_enable_tx_engine(port);
604
605 if (options)
606 uart_parse_options(options, &baud, &parity, &bits, &flow);
607
608 return uart_set_options(port, co, baud, parity, bits, flow);
609}
610
611#define MESON_SERIAL_CONSOLE(_devname) \
612 static struct console meson_serial_console_##_devname = { \
613 .name = __stringify(_devname), \
614 .write = meson_serial_console_write, \
615 .device = uart_console_device, \
616 .setup = meson_serial_console_setup, \
617 .flags = CON_PRINTBUFFER, \
618 .index = -1, \
619 .data = &meson_uart_driver_##_devname, \
620 }
621
622MESON_SERIAL_CONSOLE(ttyAML);
623MESON_SERIAL_CONSOLE(ttyS);
624
625static void meson_serial_early_console_write(struct console *co,
626 const char *s,
627 u_int count)
628{
629 struct earlycon_device *dev = co->data;
630
631 meson_serial_port_write(&dev->port, s, count);
632}
633
634static int __init
635meson_serial_early_console_setup(struct earlycon_device *device, const char *opt)
636{
637 if (!device->port.membase)
638 return -ENODEV;
639
640 meson_uart_enable_tx_engine(&device->port);
641 device->con->write = meson_serial_early_console_write;
642 return 0;
643}
644
645OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart", meson_serial_early_console_setup);
646OF_EARLYCON_DECLARE(meson, "amlogic,meson-s4-uart", meson_serial_early_console_setup);
647
648#define MESON_SERIAL_CONSOLE_PTR(_devname) (&meson_serial_console_##_devname)
649#else
650#define MESON_SERIAL_CONSOLE_PTR(_devname) (NULL)
651#endif
652
653#define MESON_UART_DRIVER(_devname) \
654 static struct uart_driver meson_uart_driver_##_devname = { \
655 .owner = THIS_MODULE, \
656 .driver_name = "meson_uart", \
657 .dev_name = __stringify(_devname), \
658 .nr = AML_UART_PORT_NUM, \
659 .cons = MESON_SERIAL_CONSOLE_PTR(_devname), \
660 }
661
662MESON_UART_DRIVER(ttyAML);
663MESON_UART_DRIVER(ttyS);
664
665static int meson_uart_probe_clocks(struct platform_device *pdev,
666 struct uart_port *port)
667{
668 struct clk *clk_xtal = NULL;
669 struct clk *clk_pclk = NULL;
670 struct clk *clk_baud = NULL;
671
672 clk_pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
673 if (IS_ERR(clk_pclk))
674 return PTR_ERR(clk_pclk);
675
676 clk_xtal = devm_clk_get_enabled(&pdev->dev, "xtal");
677 if (IS_ERR(clk_xtal))
678 return PTR_ERR(clk_xtal);
679
680 clk_baud = devm_clk_get_enabled(&pdev->dev, "baud");
681 if (IS_ERR(clk_baud))
682 return PTR_ERR(clk_baud);
683
684 port->uartclk = clk_get_rate(clk_baud);
685
686 return 0;
687}
688
689static struct uart_driver *meson_uart_current(const struct meson_uart_data *pd)
690{
691 return (pd && pd->uart_driver) ?
692 pd->uart_driver : &meson_uart_driver_ttyAML;
693}
694
695static int meson_uart_probe(struct platform_device *pdev)
696{
697 const struct meson_uart_data *priv_data;
698 struct uart_driver *uart_driver;
699 struct resource *res_mem;
700 struct uart_port *port;
701 u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */
702 int ret = 0;
703 int irq;
704 bool has_rtscts;
705
706 if (pdev->dev.of_node)
707 pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
708
709 if (pdev->id < 0) {
710 int id;
711
712 for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) {
713 if (!meson_ports[id]) {
714 pdev->id = id;
715 break;
716 }
717 }
718 }
719
720 if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM)
721 return -EINVAL;
722
723 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
724 if (!res_mem)
725 return -ENODEV;
726
727 irq = platform_get_irq(pdev, 0);
728 if (irq < 0)
729 return irq;
730
731 of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize);
732 has_rtscts = of_property_read_bool(pdev->dev.of_node, "uart-has-rtscts");
733
734 if (meson_ports[pdev->id]) {
735 return dev_err_probe(&pdev->dev, -EBUSY,
736 "port %d already allocated\n", pdev->id);
737 }
738
739 port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), GFP_KERNEL);
740 if (!port)
741 return -ENOMEM;
742
743 ret = meson_uart_probe_clocks(pdev, port);
744 if (ret)
745 return ret;
746
747 priv_data = device_get_match_data(&pdev->dev);
748
749 uart_driver = meson_uart_current(priv_data);
750
751 if (!uart_driver->state) {
752 ret = uart_register_driver(uart_driver);
753 if (ret)
754 return dev_err_probe(&pdev->dev, ret,
755 "can't register uart driver\n");
756 }
757
758 port->iotype = UPIO_MEM;
759 port->mapbase = res_mem->start;
760 port->mapsize = resource_size(res_mem);
761 port->irq = irq;
762 port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
763 if (has_rtscts)
764 port->flags |= UPF_HARD_FLOW;
765 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MESON_CONSOLE);
766 port->dev = &pdev->dev;
767 port->line = pdev->id;
768 port->type = PORT_MESON;
769 port->x_char = 0;
770 port->ops = &meson_uart_ops;
771 port->fifosize = fifosize;
772 port->private_data = (void *)priv_data;
773
774 meson_ports[pdev->id] = port;
775 platform_set_drvdata(pdev, port);
776
777 /* reset port before registering (and possibly registering console) */
778 if (meson_uart_request_port(port) >= 0) {
779 meson_uart_reset(port);
780 meson_uart_release_port(port);
781 }
782
783 ret = uart_add_one_port(uart_driver, port);
784 if (ret)
785 meson_ports[pdev->id] = NULL;
786
787 return ret;
788}
789
790static void meson_uart_remove(struct platform_device *pdev)
791{
792 struct uart_driver *uart_driver;
793 struct uart_port *port;
794
795 port = platform_get_drvdata(pdev);
796 uart_driver = meson_uart_current(port->private_data);
797 uart_remove_one_port(uart_driver, port);
798 meson_ports[pdev->id] = NULL;
799
800 for (int id = 0; id < AML_UART_PORT_NUM; id++)
801 if (meson_ports[id])
802 return;
803
804 /* No more available uart ports, unregister uart driver */
805 uart_unregister_driver(uart_driver);
806}
807
808static struct meson_uart_data meson_g12a_uart_data = {
809 .has_xtal_div2 = true,
810};
811
812static struct meson_uart_data meson_a1_uart_data = {
813 .uart_driver = &meson_uart_driver_ttyS,
814 .has_xtal_div2 = false,
815};
816
817static struct meson_uart_data meson_s4_uart_data = {
818 .uart_driver = &meson_uart_driver_ttyS,
819 .has_xtal_div2 = true,
820};
821
822static const struct of_device_id meson_uart_dt_match[] = {
823 { .compatible = "amlogic,meson6-uart" },
824 { .compatible = "amlogic,meson8-uart" },
825 { .compatible = "amlogic,meson8b-uart" },
826 { .compatible = "amlogic,meson-gx-uart" },
827 {
828 .compatible = "amlogic,meson-g12a-uart",
829 .data = (void *)&meson_g12a_uart_data,
830 },
831 {
832 .compatible = "amlogic,meson-s4-uart",
833 .data = (void *)&meson_s4_uart_data,
834 },
835 {
836 .compatible = "amlogic,meson-a1-uart",
837 .data = (void *)&meson_a1_uart_data,
838 },
839 { /* sentinel */ },
840};
841MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
842
843static struct platform_driver meson_uart_platform_driver = {
844 .probe = meson_uart_probe,
845 .remove = meson_uart_remove,
846 .driver = {
847 .name = "meson_uart",
848 .of_match_table = meson_uart_dt_match,
849 },
850};
851
852module_platform_driver(meson_uart_platform_driver);
853
854MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
855MODULE_DESCRIPTION("Amlogic Meson serial port driver");
856MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Based on meson_uart.c, by AMLOGIC, INC.
4 *
5 * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
6 */
7
8#if defined(CONFIG_SERIAL_MESON_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
9#define SUPPORT_SYSRQ
10#endif
11
12#include <linux/clk.h>
13#include <linux/console.h>
14#include <linux/delay.h>
15#include <linux/init.h>
16#include <linux/io.h>
17#include <linux/module.h>
18#include <linux/kernel.h>
19#include <linux/of.h>
20#include <linux/platform_device.h>
21#include <linux/serial.h>
22#include <linux/serial_core.h>
23#include <linux/tty.h>
24#include <linux/tty_flip.h>
25
26/* Register offsets */
27#define AML_UART_WFIFO 0x00
28#define AML_UART_RFIFO 0x04
29#define AML_UART_CONTROL 0x08
30#define AML_UART_STATUS 0x0c
31#define AML_UART_MISC 0x10
32#define AML_UART_REG5 0x14
33
34/* AML_UART_CONTROL bits */
35#define AML_UART_TX_EN BIT(12)
36#define AML_UART_RX_EN BIT(13)
37#define AML_UART_TWO_WIRE_EN BIT(15)
38#define AML_UART_STOP_BIT_LEN_MASK (0x03 << 16)
39#define AML_UART_STOP_BIT_1SB (0x00 << 16)
40#define AML_UART_STOP_BIT_2SB (0x01 << 16)
41#define AML_UART_PARITY_TYPE BIT(18)
42#define AML_UART_PARITY_EN BIT(19)
43#define AML_UART_TX_RST BIT(22)
44#define AML_UART_RX_RST BIT(23)
45#define AML_UART_CLEAR_ERR BIT(24)
46#define AML_UART_RX_INT_EN BIT(27)
47#define AML_UART_TX_INT_EN BIT(28)
48#define AML_UART_DATA_LEN_MASK (0x03 << 20)
49#define AML_UART_DATA_LEN_8BIT (0x00 << 20)
50#define AML_UART_DATA_LEN_7BIT (0x01 << 20)
51#define AML_UART_DATA_LEN_6BIT (0x02 << 20)
52#define AML_UART_DATA_LEN_5BIT (0x03 << 20)
53
54/* AML_UART_STATUS bits */
55#define AML_UART_PARITY_ERR BIT(16)
56#define AML_UART_FRAME_ERR BIT(17)
57#define AML_UART_TX_FIFO_WERR BIT(18)
58#define AML_UART_RX_EMPTY BIT(20)
59#define AML_UART_TX_FULL BIT(21)
60#define AML_UART_TX_EMPTY BIT(22)
61#define AML_UART_XMIT_BUSY BIT(25)
62#define AML_UART_ERR (AML_UART_PARITY_ERR | \
63 AML_UART_FRAME_ERR | \
64 AML_UART_TX_FIFO_WERR)
65
66/* AML_UART_MISC bits */
67#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8)
68#define AML_UART_RECV_IRQ(c) ((c) & 0xff)
69
70/* AML_UART_REG5 bits */
71#define AML_UART_BAUD_MASK 0x7fffff
72#define AML_UART_BAUD_USE BIT(23)
73#define AML_UART_BAUD_XTAL BIT(24)
74
75#define AML_UART_PORT_NUM 12
76#define AML_UART_PORT_OFFSET 6
77#define AML_UART_DEV_NAME "ttyAML"
78
79
80static struct uart_driver meson_uart_driver;
81
82static struct uart_port *meson_ports[AML_UART_PORT_NUM];
83
84static void meson_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
85{
86}
87
88static unsigned int meson_uart_get_mctrl(struct uart_port *port)
89{
90 return TIOCM_CTS;
91}
92
93static unsigned int meson_uart_tx_empty(struct uart_port *port)
94{
95 u32 val;
96
97 val = readl(port->membase + AML_UART_STATUS);
98 val &= (AML_UART_TX_EMPTY | AML_UART_XMIT_BUSY);
99 return (val == AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0;
100}
101
102static void meson_uart_stop_tx(struct uart_port *port)
103{
104 u32 val;
105
106 val = readl(port->membase + AML_UART_CONTROL);
107 val &= ~AML_UART_TX_INT_EN;
108 writel(val, port->membase + AML_UART_CONTROL);
109}
110
111static void meson_uart_stop_rx(struct uart_port *port)
112{
113 u32 val;
114
115 val = readl(port->membase + AML_UART_CONTROL);
116 val &= ~AML_UART_RX_EN;
117 writel(val, port->membase + AML_UART_CONTROL);
118}
119
120static void meson_uart_shutdown(struct uart_port *port)
121{
122 unsigned long flags;
123 u32 val;
124
125 free_irq(port->irq, port);
126
127 spin_lock_irqsave(&port->lock, flags);
128
129 val = readl(port->membase + AML_UART_CONTROL);
130 val &= ~AML_UART_RX_EN;
131 val &= ~(AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
132 writel(val, port->membase + AML_UART_CONTROL);
133
134 spin_unlock_irqrestore(&port->lock, flags);
135}
136
137static void meson_uart_start_tx(struct uart_port *port)
138{
139 struct circ_buf *xmit = &port->state->xmit;
140 unsigned int ch;
141 u32 val;
142
143 if (uart_tx_stopped(port)) {
144 meson_uart_stop_tx(port);
145 return;
146 }
147
148 while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
149 if (port->x_char) {
150 writel(port->x_char, port->membase + AML_UART_WFIFO);
151 port->icount.tx++;
152 port->x_char = 0;
153 continue;
154 }
155
156 if (uart_circ_empty(xmit))
157 break;
158
159 ch = xmit->buf[xmit->tail];
160 writel(ch, port->membase + AML_UART_WFIFO);
161 xmit->tail = (xmit->tail+1) & (SERIAL_XMIT_SIZE - 1);
162 port->icount.tx++;
163 }
164
165 if (!uart_circ_empty(xmit)) {
166 val = readl(port->membase + AML_UART_CONTROL);
167 val |= AML_UART_TX_INT_EN;
168 writel(val, port->membase + AML_UART_CONTROL);
169 }
170
171 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
172 uart_write_wakeup(port);
173}
174
175static void meson_receive_chars(struct uart_port *port)
176{
177 struct tty_port *tport = &port->state->port;
178 char flag;
179 u32 ostatus, status, ch, mode;
180
181 do {
182 flag = TTY_NORMAL;
183 port->icount.rx++;
184 ostatus = status = readl(port->membase + AML_UART_STATUS);
185
186 if (status & AML_UART_ERR) {
187 if (status & AML_UART_TX_FIFO_WERR)
188 port->icount.overrun++;
189 else if (status & AML_UART_FRAME_ERR)
190 port->icount.frame++;
191 else if (status & AML_UART_PARITY_ERR)
192 port->icount.frame++;
193
194 mode = readl(port->membase + AML_UART_CONTROL);
195 mode |= AML_UART_CLEAR_ERR;
196 writel(mode, port->membase + AML_UART_CONTROL);
197
198 /* It doesn't clear to 0 automatically */
199 mode &= ~AML_UART_CLEAR_ERR;
200 writel(mode, port->membase + AML_UART_CONTROL);
201
202 status &= port->read_status_mask;
203 if (status & AML_UART_FRAME_ERR)
204 flag = TTY_FRAME;
205 else if (status & AML_UART_PARITY_ERR)
206 flag = TTY_PARITY;
207 }
208
209 ch = readl(port->membase + AML_UART_RFIFO);
210 ch &= 0xff;
211
212 if ((ostatus & AML_UART_FRAME_ERR) && (ch == 0)) {
213 port->icount.brk++;
214 flag = TTY_BREAK;
215 if (uart_handle_break(port))
216 continue;
217 }
218
219 if (uart_handle_sysrq_char(port, ch))
220 continue;
221
222 if ((status & port->ignore_status_mask) == 0)
223 tty_insert_flip_char(tport, ch, flag);
224
225 if (status & AML_UART_TX_FIFO_WERR)
226 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
227
228 } while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY));
229
230 spin_unlock(&port->lock);
231 tty_flip_buffer_push(tport);
232 spin_lock(&port->lock);
233}
234
235static irqreturn_t meson_uart_interrupt(int irq, void *dev_id)
236{
237 struct uart_port *port = (struct uart_port *)dev_id;
238
239 spin_lock(&port->lock);
240
241 if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY))
242 meson_receive_chars(port);
243
244 if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
245 if (readl(port->membase + AML_UART_CONTROL) & AML_UART_TX_INT_EN)
246 meson_uart_start_tx(port);
247 }
248
249 spin_unlock(&port->lock);
250
251 return IRQ_HANDLED;
252}
253
254static const char *meson_uart_type(struct uart_port *port)
255{
256 return (port->type == PORT_MESON) ? "meson_uart" : NULL;
257}
258
259static void meson_uart_reset(struct uart_port *port)
260{
261 u32 val;
262
263 val = readl(port->membase + AML_UART_CONTROL);
264 val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR);
265 writel(val, port->membase + AML_UART_CONTROL);
266
267 val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR);
268 writel(val, port->membase + AML_UART_CONTROL);
269}
270
271static int meson_uart_startup(struct uart_port *port)
272{
273 u32 val;
274 int ret = 0;
275
276 val = readl(port->membase + AML_UART_CONTROL);
277 val |= AML_UART_CLEAR_ERR;
278 writel(val, port->membase + AML_UART_CONTROL);
279 val &= ~AML_UART_CLEAR_ERR;
280 writel(val, port->membase + AML_UART_CONTROL);
281
282 val |= (AML_UART_RX_EN | AML_UART_TX_EN);
283 writel(val, port->membase + AML_UART_CONTROL);
284
285 val |= (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
286 writel(val, port->membase + AML_UART_CONTROL);
287
288 val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
289 writel(val, port->membase + AML_UART_MISC);
290
291 ret = request_irq(port->irq, meson_uart_interrupt, 0,
292 port->name, port);
293
294 return ret;
295}
296
297static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
298{
299 u32 val;
300
301 while (!meson_uart_tx_empty(port))
302 cpu_relax();
303
304 if (port->uartclk == 24000000) {
305 val = ((port->uartclk / 3) / baud) - 1;
306 val |= AML_UART_BAUD_XTAL;
307 } else {
308 val = ((port->uartclk * 10 / (baud * 4) + 5) / 10) - 1;
309 }
310 val |= AML_UART_BAUD_USE;
311 writel(val, port->membase + AML_UART_REG5);
312}
313
314static void meson_uart_set_termios(struct uart_port *port,
315 struct ktermios *termios,
316 struct ktermios *old)
317{
318 unsigned int cflags, iflags, baud;
319 unsigned long flags;
320 u32 val;
321
322 spin_lock_irqsave(&port->lock, flags);
323
324 cflags = termios->c_cflag;
325 iflags = termios->c_iflag;
326
327 val = readl(port->membase + AML_UART_CONTROL);
328
329 val &= ~AML_UART_DATA_LEN_MASK;
330 switch (cflags & CSIZE) {
331 case CS8:
332 val |= AML_UART_DATA_LEN_8BIT;
333 break;
334 case CS7:
335 val |= AML_UART_DATA_LEN_7BIT;
336 break;
337 case CS6:
338 val |= AML_UART_DATA_LEN_6BIT;
339 break;
340 case CS5:
341 val |= AML_UART_DATA_LEN_5BIT;
342 break;
343 }
344
345 if (cflags & PARENB)
346 val |= AML_UART_PARITY_EN;
347 else
348 val &= ~AML_UART_PARITY_EN;
349
350 if (cflags & PARODD)
351 val |= AML_UART_PARITY_TYPE;
352 else
353 val &= ~AML_UART_PARITY_TYPE;
354
355 val &= ~AML_UART_STOP_BIT_LEN_MASK;
356 if (cflags & CSTOPB)
357 val |= AML_UART_STOP_BIT_2SB;
358 else
359 val |= AML_UART_STOP_BIT_1SB;
360
361 if (cflags & CRTSCTS)
362 val &= ~AML_UART_TWO_WIRE_EN;
363 else
364 val |= AML_UART_TWO_WIRE_EN;
365
366 writel(val, port->membase + AML_UART_CONTROL);
367
368 baud = uart_get_baud_rate(port, termios, old, 50, 4000000);
369 meson_uart_change_speed(port, baud);
370
371 port->read_status_mask = AML_UART_TX_FIFO_WERR;
372 if (iflags & INPCK)
373 port->read_status_mask |= AML_UART_PARITY_ERR |
374 AML_UART_FRAME_ERR;
375
376 port->ignore_status_mask = 0;
377 if (iflags & IGNPAR)
378 port->ignore_status_mask |= AML_UART_PARITY_ERR |
379 AML_UART_FRAME_ERR;
380
381 uart_update_timeout(port, termios->c_cflag, baud);
382 spin_unlock_irqrestore(&port->lock, flags);
383}
384
385static int meson_uart_verify_port(struct uart_port *port,
386 struct serial_struct *ser)
387{
388 int ret = 0;
389
390 if (port->type != PORT_MESON)
391 ret = -EINVAL;
392 if (port->irq != ser->irq)
393 ret = -EINVAL;
394 if (ser->baud_base < 9600)
395 ret = -EINVAL;
396 return ret;
397}
398
399static void meson_uart_release_port(struct uart_port *port)
400{
401 devm_iounmap(port->dev, port->membase);
402 port->membase = NULL;
403 devm_release_mem_region(port->dev, port->mapbase, port->mapsize);
404}
405
406static int meson_uart_request_port(struct uart_port *port)
407{
408 if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize,
409 dev_name(port->dev))) {
410 dev_err(port->dev, "Memory region busy\n");
411 return -EBUSY;
412 }
413
414 port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
415 port->mapsize);
416 if (!port->membase)
417 return -ENOMEM;
418
419 return 0;
420}
421
422static void meson_uart_config_port(struct uart_port *port, int flags)
423{
424 if (flags & UART_CONFIG_TYPE) {
425 port->type = PORT_MESON;
426 meson_uart_request_port(port);
427 }
428}
429
430static const struct uart_ops meson_uart_ops = {
431 .set_mctrl = meson_uart_set_mctrl,
432 .get_mctrl = meson_uart_get_mctrl,
433 .tx_empty = meson_uart_tx_empty,
434 .start_tx = meson_uart_start_tx,
435 .stop_tx = meson_uart_stop_tx,
436 .stop_rx = meson_uart_stop_rx,
437 .startup = meson_uart_startup,
438 .shutdown = meson_uart_shutdown,
439 .set_termios = meson_uart_set_termios,
440 .type = meson_uart_type,
441 .config_port = meson_uart_config_port,
442 .request_port = meson_uart_request_port,
443 .release_port = meson_uart_release_port,
444 .verify_port = meson_uart_verify_port,
445};
446
447#ifdef CONFIG_SERIAL_MESON_CONSOLE
448static void meson_uart_enable_tx_engine(struct uart_port *port)
449{
450 u32 val;
451
452 val = readl(port->membase + AML_UART_CONTROL);
453 val |= AML_UART_TX_EN;
454 writel(val, port->membase + AML_UART_CONTROL);
455}
456
457static void meson_console_putchar(struct uart_port *port, int ch)
458{
459 if (!port->membase)
460 return;
461
462 while (readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)
463 cpu_relax();
464 writel(ch, port->membase + AML_UART_WFIFO);
465}
466
467static void meson_serial_port_write(struct uart_port *port, const char *s,
468 u_int count)
469{
470 unsigned long flags;
471 int locked;
472 u32 val, tmp;
473
474 local_irq_save(flags);
475 if (port->sysrq) {
476 locked = 0;
477 } else if (oops_in_progress) {
478 locked = spin_trylock(&port->lock);
479 } else {
480 spin_lock(&port->lock);
481 locked = 1;
482 }
483
484 val = readl(port->membase + AML_UART_CONTROL);
485 tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN);
486 writel(tmp, port->membase + AML_UART_CONTROL);
487
488 uart_console_write(port, s, count, meson_console_putchar);
489 writel(val, port->membase + AML_UART_CONTROL);
490
491 if (locked)
492 spin_unlock(&port->lock);
493 local_irq_restore(flags);
494}
495
496static void meson_serial_console_write(struct console *co, const char *s,
497 u_int count)
498{
499 struct uart_port *port;
500
501 port = meson_ports[co->index];
502 if (!port)
503 return;
504
505 meson_serial_port_write(port, s, count);
506}
507
508static int meson_serial_console_setup(struct console *co, char *options)
509{
510 struct uart_port *port;
511 int baud = 115200;
512 int bits = 8;
513 int parity = 'n';
514 int flow = 'n';
515
516 if (co->index < 0 || co->index >= AML_UART_PORT_NUM)
517 return -EINVAL;
518
519 port = meson_ports[co->index];
520 if (!port || !port->membase)
521 return -ENODEV;
522
523 meson_uart_enable_tx_engine(port);
524
525 if (options)
526 uart_parse_options(options, &baud, &parity, &bits, &flow);
527
528 return uart_set_options(port, co, baud, parity, bits, flow);
529}
530
531static struct console meson_serial_console = {
532 .name = AML_UART_DEV_NAME,
533 .write = meson_serial_console_write,
534 .device = uart_console_device,
535 .setup = meson_serial_console_setup,
536 .flags = CON_PRINTBUFFER,
537 .index = -1,
538 .data = &meson_uart_driver,
539};
540
541static int __init meson_serial_console_init(void)
542{
543 register_console(&meson_serial_console);
544 return 0;
545}
546console_initcall(meson_serial_console_init);
547
548static void meson_serial_early_console_write(struct console *co,
549 const char *s,
550 u_int count)
551{
552 struct earlycon_device *dev = co->data;
553
554 meson_serial_port_write(&dev->port, s, count);
555}
556
557static int __init
558meson_serial_early_console_setup(struct earlycon_device *device, const char *opt)
559{
560 if (!device->port.membase)
561 return -ENODEV;
562
563 meson_uart_enable_tx_engine(&device->port);
564 device->con->write = meson_serial_early_console_write;
565 return 0;
566}
567/* Legacy bindings, should be removed when no more used */
568OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart",
569 meson_serial_early_console_setup);
570/* Stable bindings */
571OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
572 meson_serial_early_console_setup);
573
574#define MESON_SERIAL_CONSOLE (&meson_serial_console)
575#else
576#define MESON_SERIAL_CONSOLE NULL
577#endif
578
579static struct uart_driver meson_uart_driver = {
580 .owner = THIS_MODULE,
581 .driver_name = "meson_uart",
582 .dev_name = AML_UART_DEV_NAME,
583 .nr = AML_UART_PORT_NUM,
584 .cons = MESON_SERIAL_CONSOLE,
585};
586
587static inline struct clk *meson_uart_probe_clock(struct device *dev,
588 const char *id)
589{
590 struct clk *clk = NULL;
591 int ret;
592
593 clk = devm_clk_get(dev, id);
594 if (IS_ERR(clk))
595 return clk;
596
597 ret = clk_prepare_enable(clk);
598 if (ret) {
599 dev_err(dev, "couldn't enable clk\n");
600 return ERR_PTR(ret);
601 }
602
603 devm_add_action_or_reset(dev,
604 (void(*)(void *))clk_disable_unprepare,
605 clk);
606
607 return clk;
608}
609
610/*
611 * This function gets clocks in the legacy non-stable DT bindings.
612 * This code will be remove once all the platforms switch to the
613 * new DT bindings.
614 */
615static int meson_uart_probe_clocks_legacy(struct platform_device *pdev,
616 struct uart_port *port)
617{
618 struct clk *clk = NULL;
619
620 clk = meson_uart_probe_clock(&pdev->dev, NULL);
621 if (IS_ERR(clk))
622 return PTR_ERR(clk);
623
624 port->uartclk = clk_get_rate(clk);
625
626 return 0;
627}
628
629static int meson_uart_probe_clocks(struct platform_device *pdev,
630 struct uart_port *port)
631{
632 struct clk *clk_xtal = NULL;
633 struct clk *clk_pclk = NULL;
634 struct clk *clk_baud = NULL;
635
636 clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk");
637 if (IS_ERR(clk_pclk))
638 return PTR_ERR(clk_pclk);
639
640 clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal");
641 if (IS_ERR(clk_xtal))
642 return PTR_ERR(clk_xtal);
643
644 clk_baud = meson_uart_probe_clock(&pdev->dev, "baud");
645 if (IS_ERR(clk_baud))
646 return PTR_ERR(clk_baud);
647
648 port->uartclk = clk_get_rate(clk_baud);
649
650 return 0;
651}
652
653static int meson_uart_probe(struct platform_device *pdev)
654{
655 struct resource *res_mem, *res_irq;
656 struct uart_port *port;
657 int ret = 0;
658 int id = -1;
659
660 if (pdev->dev.of_node)
661 pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
662
663 if (pdev->id < 0) {
664 for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) {
665 if (!meson_ports[id]) {
666 pdev->id = id;
667 break;
668 }
669 }
670 }
671
672 if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM)
673 return -EINVAL;
674
675 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
676 if (!res_mem)
677 return -ENODEV;
678
679 res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
680 if (!res_irq)
681 return -ENODEV;
682
683 if (meson_ports[pdev->id]) {
684 dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
685 return -EBUSY;
686 }
687
688 port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), GFP_KERNEL);
689 if (!port)
690 return -ENOMEM;
691
692 /* Use legacy way until all platforms switch to new bindings */
693 if (of_device_is_compatible(pdev->dev.of_node, "amlogic,meson-uart"))
694 ret = meson_uart_probe_clocks_legacy(pdev, port);
695 else
696 ret = meson_uart_probe_clocks(pdev, port);
697
698 if (ret)
699 return ret;
700
701 port->iotype = UPIO_MEM;
702 port->mapbase = res_mem->start;
703 port->mapsize = resource_size(res_mem);
704 port->irq = res_irq->start;
705 port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
706 port->dev = &pdev->dev;
707 port->line = pdev->id;
708 port->type = PORT_MESON;
709 port->x_char = 0;
710 port->ops = &meson_uart_ops;
711 port->fifosize = 64;
712
713 meson_ports[pdev->id] = port;
714 platform_set_drvdata(pdev, port);
715
716 /* reset port before registering (and possibly registering console) */
717 if (meson_uart_request_port(port) >= 0) {
718 meson_uart_reset(port);
719 meson_uart_release_port(port);
720 }
721
722 ret = uart_add_one_port(&meson_uart_driver, port);
723 if (ret)
724 meson_ports[pdev->id] = NULL;
725
726 return ret;
727}
728
729static int meson_uart_remove(struct platform_device *pdev)
730{
731 struct uart_port *port;
732
733 port = platform_get_drvdata(pdev);
734 uart_remove_one_port(&meson_uart_driver, port);
735 meson_ports[pdev->id] = NULL;
736
737 return 0;
738}
739
740static const struct of_device_id meson_uart_dt_match[] = {
741 /* Legacy bindings, should be removed when no more used */
742 { .compatible = "amlogic,meson-uart" },
743 /* Stable bindings */
744 { .compatible = "amlogic,meson6-uart" },
745 { .compatible = "amlogic,meson8-uart" },
746 { .compatible = "amlogic,meson8b-uart" },
747 { .compatible = "amlogic,meson-gx-uart" },
748 { /* sentinel */ },
749};
750MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
751
752static struct platform_driver meson_uart_platform_driver = {
753 .probe = meson_uart_probe,
754 .remove = meson_uart_remove,
755 .driver = {
756 .name = "meson_uart",
757 .of_match_table = meson_uart_dt_match,
758 },
759};
760
761static int __init meson_uart_init(void)
762{
763 int ret;
764
765 ret = uart_register_driver(&meson_uart_driver);
766 if (ret)
767 return ret;
768
769 ret = platform_driver_register(&meson_uart_platform_driver);
770 if (ret)
771 uart_unregister_driver(&meson_uart_driver);
772
773 return ret;
774}
775
776static void __exit meson_uart_exit(void)
777{
778 platform_driver_unregister(&meson_uart_platform_driver);
779 uart_unregister_driver(&meson_uart_driver);
780}
781
782module_init(meson_uart_init);
783module_exit(meson_uart_exit);
784
785MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
786MODULE_DESCRIPTION("Amlogic Meson serial port driver");
787MODULE_LICENSE("GPL v2");