Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
4 * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
5 */
6
7#include <linux/mdio.h>
8#include <linux/module.h>
9#include <linux/phy.h>
10#include <linux/of.h>
11#include <linux/bitfield.h>
12
13#define XWAY_MDIO_MIICTRL 0x17 /* mii control */
14#define XWAY_MDIO_IMASK 0x19 /* interrupt mask */
15#define XWAY_MDIO_ISTAT 0x1A /* interrupt status */
16#define XWAY_MDIO_LED 0x1B /* led control */
17
18#define XWAY_MDIO_MIICTRL_RXSKEW_MASK GENMASK(14, 12)
19#define XWAY_MDIO_MIICTRL_TXSKEW_MASK GENMASK(10, 8)
20
21/* bit 15:12 are reserved */
22#define XWAY_MDIO_LED_LED3_EN BIT(11) /* Enable the integrated function of LED3 */
23#define XWAY_MDIO_LED_LED2_EN BIT(10) /* Enable the integrated function of LED2 */
24#define XWAY_MDIO_LED_LED1_EN BIT(9) /* Enable the integrated function of LED1 */
25#define XWAY_MDIO_LED_LED0_EN BIT(8) /* Enable the integrated function of LED0 */
26/* bit 7:4 are reserved */
27#define XWAY_MDIO_LED_LED3_DA BIT(3) /* Direct Access to LED3 */
28#define XWAY_MDIO_LED_LED2_DA BIT(2) /* Direct Access to LED2 */
29#define XWAY_MDIO_LED_LED1_DA BIT(1) /* Direct Access to LED1 */
30#define XWAY_MDIO_LED_LED0_DA BIT(0) /* Direct Access to LED0 */
31
32#define XWAY_MDIO_INIT_WOL BIT(15) /* Wake-On-LAN */
33#define XWAY_MDIO_INIT_MSRE BIT(14)
34#define XWAY_MDIO_INIT_NPRX BIT(13)
35#define XWAY_MDIO_INIT_NPTX BIT(12)
36#define XWAY_MDIO_INIT_ANE BIT(11) /* Auto-Neg error */
37#define XWAY_MDIO_INIT_ANC BIT(10) /* Auto-Neg complete */
38#define XWAY_MDIO_INIT_ADSC BIT(5) /* Link auto-downspeed detect */
39#define XWAY_MDIO_INIT_MPIPC BIT(4)
40#define XWAY_MDIO_INIT_MDIXC BIT(3)
41#define XWAY_MDIO_INIT_DXMC BIT(2) /* Duplex mode change */
42#define XWAY_MDIO_INIT_LSPC BIT(1) /* Link speed change */
43#define XWAY_MDIO_INIT_LSTC BIT(0) /* Link state change */
44#define XWAY_MDIO_INIT_MASK (XWAY_MDIO_INIT_LSTC | \
45 XWAY_MDIO_INIT_ADSC)
46
47#define ADVERTISED_MPD BIT(10) /* Multi-port device */
48
49/* LED Configuration */
50#define XWAY_MMD_LEDCH 0x01E0
51/* Inverse of SCAN Function */
52#define XWAY_MMD_LEDCH_NACS_NONE 0x0000
53#define XWAY_MMD_LEDCH_NACS_LINK 0x0001
54#define XWAY_MMD_LEDCH_NACS_PDOWN 0x0002
55#define XWAY_MMD_LEDCH_NACS_EEE 0x0003
56#define XWAY_MMD_LEDCH_NACS_ANEG 0x0004
57#define XWAY_MMD_LEDCH_NACS_ABIST 0x0005
58#define XWAY_MMD_LEDCH_NACS_CDIAG 0x0006
59#define XWAY_MMD_LEDCH_NACS_TEST 0x0007
60/* Slow Blink Frequency */
61#define XWAY_MMD_LEDCH_SBF_F02HZ 0x0000
62#define XWAY_MMD_LEDCH_SBF_F04HZ 0x0010
63#define XWAY_MMD_LEDCH_SBF_F08HZ 0x0020
64#define XWAY_MMD_LEDCH_SBF_F16HZ 0x0030
65/* Fast Blink Frequency */
66#define XWAY_MMD_LEDCH_FBF_F02HZ 0x0000
67#define XWAY_MMD_LEDCH_FBF_F04HZ 0x0040
68#define XWAY_MMD_LEDCH_FBF_F08HZ 0x0080
69#define XWAY_MMD_LEDCH_FBF_F16HZ 0x00C0
70/* LED Configuration */
71#define XWAY_MMD_LEDCL 0x01E1
72/* Complex Blinking Configuration */
73#define XWAY_MMD_LEDCH_CBLINK_NONE 0x0000
74#define XWAY_MMD_LEDCH_CBLINK_LINK 0x0001
75#define XWAY_MMD_LEDCH_CBLINK_PDOWN 0x0002
76#define XWAY_MMD_LEDCH_CBLINK_EEE 0x0003
77#define XWAY_MMD_LEDCH_CBLINK_ANEG 0x0004
78#define XWAY_MMD_LEDCH_CBLINK_ABIST 0x0005
79#define XWAY_MMD_LEDCH_CBLINK_CDIAG 0x0006
80#define XWAY_MMD_LEDCH_CBLINK_TEST 0x0007
81/* Complex SCAN Configuration */
82#define XWAY_MMD_LEDCH_SCAN_NONE 0x0000
83#define XWAY_MMD_LEDCH_SCAN_LINK 0x0010
84#define XWAY_MMD_LEDCH_SCAN_PDOWN 0x0020
85#define XWAY_MMD_LEDCH_SCAN_EEE 0x0030
86#define XWAY_MMD_LEDCH_SCAN_ANEG 0x0040
87#define XWAY_MMD_LEDCH_SCAN_ABIST 0x0050
88#define XWAY_MMD_LEDCH_SCAN_CDIAG 0x0060
89#define XWAY_MMD_LEDCH_SCAN_TEST 0x0070
90/* Configuration for LED Pin x */
91#define XWAY_MMD_LED0H 0x01E2
92/* Fast Blinking Configuration */
93#define XWAY_MMD_LEDxH_BLINKF_MASK 0x000F
94#define XWAY_MMD_LEDxH_BLINKF_NONE 0x0000
95#define XWAY_MMD_LEDxH_BLINKF_LINK10 0x0001
96#define XWAY_MMD_LEDxH_BLINKF_LINK100 0x0002
97#define XWAY_MMD_LEDxH_BLINKF_LINK10X 0x0003
98#define XWAY_MMD_LEDxH_BLINKF_LINK1000 0x0004
99#define XWAY_MMD_LEDxH_BLINKF_LINK10_0 0x0005
100#define XWAY_MMD_LEDxH_BLINKF_LINK100X 0x0006
101#define XWAY_MMD_LEDxH_BLINKF_LINK10XX 0x0007
102#define XWAY_MMD_LEDxH_BLINKF_PDOWN 0x0008
103#define XWAY_MMD_LEDxH_BLINKF_EEE 0x0009
104#define XWAY_MMD_LEDxH_BLINKF_ANEG 0x000A
105#define XWAY_MMD_LEDxH_BLINKF_ABIST 0x000B
106#define XWAY_MMD_LEDxH_BLINKF_CDIAG 0x000C
107/* Constant On Configuration */
108#define XWAY_MMD_LEDxH_CON_MASK 0x00F0
109#define XWAY_MMD_LEDxH_CON_NONE 0x0000
110#define XWAY_MMD_LEDxH_CON_LINK10 0x0010
111#define XWAY_MMD_LEDxH_CON_LINK100 0x0020
112#define XWAY_MMD_LEDxH_CON_LINK10X 0x0030
113#define XWAY_MMD_LEDxH_CON_LINK1000 0x0040
114#define XWAY_MMD_LEDxH_CON_LINK10_0 0x0050
115#define XWAY_MMD_LEDxH_CON_LINK100X 0x0060
116#define XWAY_MMD_LEDxH_CON_LINK10XX 0x0070
117#define XWAY_MMD_LEDxH_CON_PDOWN 0x0080
118#define XWAY_MMD_LEDxH_CON_EEE 0x0090
119#define XWAY_MMD_LEDxH_CON_ANEG 0x00A0
120#define XWAY_MMD_LEDxH_CON_ABIST 0x00B0
121#define XWAY_MMD_LEDxH_CON_CDIAG 0x00C0
122#define XWAY_MMD_LEDxH_CON_COPPER 0x00D0
123#define XWAY_MMD_LEDxH_CON_FIBER 0x00E0
124/* Configuration for LED Pin x */
125#define XWAY_MMD_LED0L 0x01E3
126/* Pulsing Configuration */
127#define XWAY_MMD_LEDxL_PULSE_MASK 0x000F
128#define XWAY_MMD_LEDxL_PULSE_NONE 0x0000
129#define XWAY_MMD_LEDxL_PULSE_TXACT 0x0001
130#define XWAY_MMD_LEDxL_PULSE_RXACT 0x0002
131#define XWAY_MMD_LEDxL_PULSE_COL 0x0004
132/* Slow Blinking Configuration */
133#define XWAY_MMD_LEDxL_BLINKS_MASK 0x00F0
134#define XWAY_MMD_LEDxL_BLINKS_NONE 0x0000
135#define XWAY_MMD_LEDxL_BLINKS_LINK10 0x0010
136#define XWAY_MMD_LEDxL_BLINKS_LINK100 0x0020
137#define XWAY_MMD_LEDxL_BLINKS_LINK10X 0x0030
138#define XWAY_MMD_LEDxL_BLINKS_LINK1000 0x0040
139#define XWAY_MMD_LEDxL_BLINKS_LINK10_0 0x0050
140#define XWAY_MMD_LEDxL_BLINKS_LINK100X 0x0060
141#define XWAY_MMD_LEDxL_BLINKS_LINK10XX 0x0070
142#define XWAY_MMD_LEDxL_BLINKS_PDOWN 0x0080
143#define XWAY_MMD_LEDxL_BLINKS_EEE 0x0090
144#define XWAY_MMD_LEDxL_BLINKS_ANEG 0x00A0
145#define XWAY_MMD_LEDxL_BLINKS_ABIST 0x00B0
146#define XWAY_MMD_LEDxL_BLINKS_CDIAG 0x00C0
147#define XWAY_MMD_LED1H 0x01E4
148#define XWAY_MMD_LED1L 0x01E5
149#define XWAY_MMD_LED2H 0x01E6
150#define XWAY_MMD_LED2L 0x01E7
151#define XWAY_MMD_LED3H 0x01E8
152#define XWAY_MMD_LED3L 0x01E9
153
154#define XWAY_GPHY_MAX_LEDS 3
155#define XWAY_GPHY_LED_INV(idx) BIT(12 + (idx))
156#define XWAY_GPHY_LED_EN(idx) BIT(8 + (idx))
157#define XWAY_GPHY_LED_DA(idx) BIT(idx)
158#define XWAY_MMD_LEDxH(idx) (XWAY_MMD_LED0H + 2 * (idx))
159#define XWAY_MMD_LEDxL(idx) (XWAY_MMD_LED0L + 2 * (idx))
160
161#define PHY_ID_PHY11G_1_3 0x030260D1
162#define PHY_ID_PHY22F_1_3 0x030260E1
163#define PHY_ID_PHY11G_1_4 0xD565A400
164#define PHY_ID_PHY22F_1_4 0xD565A410
165#define PHY_ID_PHY11G_1_5 0xD565A401
166#define PHY_ID_PHY22F_1_5 0xD565A411
167#define PHY_ID_PHY11G_VR9_1_1 0xD565A408
168#define PHY_ID_PHY22F_VR9_1_1 0xD565A418
169#define PHY_ID_PHY11G_VR9_1_2 0xD565A409
170#define PHY_ID_PHY22F_VR9_1_2 0xD565A419
171
172static const int xway_internal_delay[] = {0, 500, 1000, 1500, 2000, 2500,
173 3000, 3500};
174
175static int xway_gphy_rgmii_init(struct phy_device *phydev)
176{
177 struct device *dev = &phydev->mdio.dev;
178 unsigned int delay_size = ARRAY_SIZE(xway_internal_delay);
179 s32 int_delay;
180 int val = 0;
181
182 if (!phy_interface_is_rgmii(phydev))
183 return 0;
184
185 /* Existing behavior was to use default pin strapping delay in rgmii
186 * mode, but rgmii should have meant no delay. Warn existing users,
187 * but do not change anything at the moment.
188 */
189 if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
190 u16 txskew, rxskew;
191
192 val = phy_read(phydev, XWAY_MDIO_MIICTRL);
193 if (val < 0)
194 return val;
195
196 txskew = FIELD_GET(XWAY_MDIO_MIICTRL_TXSKEW_MASK, val);
197 rxskew = FIELD_GET(XWAY_MDIO_MIICTRL_RXSKEW_MASK, val);
198
199 if (txskew > 0 || rxskew > 0)
200 phydev_warn(phydev,
201 "PHY has delays (e.g. via pin strapping), but phy-mode = 'rgmii'\n"
202 "Should be 'rgmii-id' to use internal delays txskew:%d ps rxskew:%d ps\n",
203 xway_internal_delay[txskew],
204 xway_internal_delay[rxskew]);
205 return 0;
206 }
207
208 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
209 phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
210 int_delay = phy_get_internal_delay(phydev, dev,
211 xway_internal_delay,
212 delay_size, true);
213
214 /* if rx-internal-delay-ps is missing, use default of 2.0 ns */
215 if (int_delay < 0)
216 int_delay = 4; /* 2000 ps */
217
218 val |= FIELD_PREP(XWAY_MDIO_MIICTRL_RXSKEW_MASK, int_delay);
219 }
220
221 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
222 phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
223 int_delay = phy_get_internal_delay(phydev, dev,
224 xway_internal_delay,
225 delay_size, false);
226
227 /* if tx-internal-delay-ps is missing, use default of 2.0 ns */
228 if (int_delay < 0)
229 int_delay = 4; /* 2000 ps */
230
231 val |= FIELD_PREP(XWAY_MDIO_MIICTRL_TXSKEW_MASK, int_delay);
232 }
233
234 return phy_modify(phydev, XWAY_MDIO_MIICTRL,
235 XWAY_MDIO_MIICTRL_RXSKEW_MASK |
236 XWAY_MDIO_MIICTRL_TXSKEW_MASK, val);
237}
238
239static int xway_gphy_init_leds(struct phy_device *phydev)
240{
241 int err;
242 u32 ledxh;
243 u32 ledxl;
244
245 /* Ensure that integrated led function is enabled for all leds */
246 err = phy_write(phydev, XWAY_MDIO_LED,
247 XWAY_MDIO_LED_LED0_EN |
248 XWAY_MDIO_LED_LED1_EN |
249 XWAY_MDIO_LED_LED2_EN |
250 XWAY_MDIO_LED_LED3_EN);
251 if (err)
252 return err;
253
254 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH,
255 XWAY_MMD_LEDCH_NACS_NONE |
256 XWAY_MMD_LEDCH_SBF_F02HZ |
257 XWAY_MMD_LEDCH_FBF_F16HZ);
258 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCL,
259 XWAY_MMD_LEDCH_CBLINK_NONE |
260 XWAY_MMD_LEDCH_SCAN_NONE);
261
262 /**
263 * In most cases only one LED is connected to this phy, so
264 * configure them all to constant on and pulse mode. LED3 is
265 * only available in some packages, leave it in its reset
266 * configuration.
267 */
268 ledxh = XWAY_MMD_LEDxH_BLINKF_NONE | XWAY_MMD_LEDxH_CON_LINK10XX;
269 ledxl = XWAY_MMD_LEDxL_PULSE_TXACT | XWAY_MMD_LEDxL_PULSE_RXACT |
270 XWAY_MMD_LEDxL_BLINKS_NONE;
271 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0H, ledxh);
272 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0L, ledxl);
273 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1H, ledxh);
274 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1L, ledxl);
275 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
276 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
277
278 return 0;
279}
280
281static int xway_gphy_config_init(struct phy_device *phydev)
282{
283 struct device_node *np = phydev->mdio.dev.of_node;
284 int err;
285
286 /* Mask all interrupts */
287 err = phy_write(phydev, XWAY_MDIO_IMASK, 0);
288 if (err)
289 return err;
290
291 /* Use default LED configuration if 'leds' node isn't defined */
292 if (!of_get_child_by_name(np, "leds"))
293 xway_gphy_init_leds(phydev);
294
295 /* Clear all pending interrupts */
296 phy_read(phydev, XWAY_MDIO_ISTAT);
297
298 err = xway_gphy_rgmii_init(phydev);
299 if (err)
300 return err;
301
302 return 0;
303}
304
305static int xway_gphy14_config_aneg(struct phy_device *phydev)
306{
307 int reg, err;
308
309 /* Advertise as multi-port device, see IEEE802.3-2002 40.5.1.1 */
310 /* This is a workaround for an errata in rev < 1.5 devices */
311 reg = phy_read(phydev, MII_CTRL1000);
312 reg |= ADVERTISED_MPD;
313 err = phy_write(phydev, MII_CTRL1000, reg);
314 if (err)
315 return err;
316
317 return genphy_config_aneg(phydev);
318}
319
320static int xway_gphy_ack_interrupt(struct phy_device *phydev)
321{
322 int reg;
323
324 reg = phy_read(phydev, XWAY_MDIO_ISTAT);
325 return (reg < 0) ? reg : 0;
326}
327
328static int xway_gphy_config_intr(struct phy_device *phydev)
329{
330 u16 mask = 0;
331 int err;
332
333 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
334 err = xway_gphy_ack_interrupt(phydev);
335 if (err)
336 return err;
337
338 mask = XWAY_MDIO_INIT_MASK;
339 err = phy_write(phydev, XWAY_MDIO_IMASK, mask);
340 } else {
341 err = phy_write(phydev, XWAY_MDIO_IMASK, mask);
342 if (err)
343 return err;
344
345 err = xway_gphy_ack_interrupt(phydev);
346 }
347
348 return err;
349}
350
351static irqreturn_t xway_gphy_handle_interrupt(struct phy_device *phydev)
352{
353 int irq_status;
354
355 irq_status = phy_read(phydev, XWAY_MDIO_ISTAT);
356 if (irq_status < 0) {
357 phy_error(phydev);
358 return IRQ_NONE;
359 }
360
361 if (!(irq_status & XWAY_MDIO_INIT_MASK))
362 return IRQ_NONE;
363
364 phy_trigger_machine(phydev);
365
366 return IRQ_HANDLED;
367}
368
369static int xway_gphy_led_brightness_set(struct phy_device *phydev,
370 u8 index, enum led_brightness value)
371{
372 int ret;
373
374 if (index >= XWAY_GPHY_MAX_LEDS)
375 return -EINVAL;
376
377 /* clear EN and set manual LED state */
378 ret = phy_modify(phydev, XWAY_MDIO_LED,
379 ((value == LED_OFF) ? XWAY_GPHY_LED_EN(index) : 0) |
380 XWAY_GPHY_LED_DA(index),
381 (value == LED_OFF) ? 0 : XWAY_GPHY_LED_DA(index));
382 if (ret)
383 return ret;
384
385 /* clear HW LED setup */
386 if (value == LED_OFF) {
387 ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDxH(index), 0);
388 if (ret)
389 return ret;
390
391 return phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDxL(index), 0);
392 } else {
393 return 0;
394 }
395}
396
397static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_LINK) |
398 BIT(TRIGGER_NETDEV_LINK_10) |
399 BIT(TRIGGER_NETDEV_LINK_100) |
400 BIT(TRIGGER_NETDEV_LINK_1000) |
401 BIT(TRIGGER_NETDEV_RX) |
402 BIT(TRIGGER_NETDEV_TX));
403
404static int xway_gphy_led_hw_is_supported(struct phy_device *phydev, u8 index,
405 unsigned long rules)
406{
407 if (index >= XWAY_GPHY_MAX_LEDS)
408 return -EINVAL;
409
410 /* activity triggers are not possible without combination with a link
411 * trigger.
412 */
413 if (rules & (BIT(TRIGGER_NETDEV_RX) | BIT(TRIGGER_NETDEV_TX)) &&
414 !(rules & (BIT(TRIGGER_NETDEV_LINK) |
415 BIT(TRIGGER_NETDEV_LINK_10) |
416 BIT(TRIGGER_NETDEV_LINK_100) |
417 BIT(TRIGGER_NETDEV_LINK_1000))))
418 return -EOPNOTSUPP;
419
420 /* All other combinations of the supported triggers are allowed */
421 if (rules & ~supported_triggers)
422 return -EOPNOTSUPP;
423
424 return 0;
425}
426
427static int xway_gphy_led_hw_control_get(struct phy_device *phydev, u8 index,
428 unsigned long *rules)
429{
430 int lval, hval;
431
432 if (index >= XWAY_GPHY_MAX_LEDS)
433 return -EINVAL;
434
435 hval = phy_read_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDxH(index));
436 if (hval < 0)
437 return hval;
438
439 lval = phy_read_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDxL(index));
440 if (lval < 0)
441 return lval;
442
443 if (hval & XWAY_MMD_LEDxH_CON_LINK10)
444 *rules |= BIT(TRIGGER_NETDEV_LINK_10);
445
446 if (hval & XWAY_MMD_LEDxH_CON_LINK100)
447 *rules |= BIT(TRIGGER_NETDEV_LINK_100);
448
449 if (hval & XWAY_MMD_LEDxH_CON_LINK1000)
450 *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
451
452 if ((hval & XWAY_MMD_LEDxH_CON_LINK10) &&
453 (hval & XWAY_MMD_LEDxH_CON_LINK100) &&
454 (hval & XWAY_MMD_LEDxH_CON_LINK1000))
455 *rules |= BIT(TRIGGER_NETDEV_LINK);
456
457 if (lval & XWAY_MMD_LEDxL_PULSE_TXACT)
458 *rules |= BIT(TRIGGER_NETDEV_TX);
459
460 if (lval & XWAY_MMD_LEDxL_PULSE_RXACT)
461 *rules |= BIT(TRIGGER_NETDEV_RX);
462
463 return 0;
464}
465
466static int xway_gphy_led_hw_control_set(struct phy_device *phydev, u8 index,
467 unsigned long rules)
468{
469 u16 hval = 0, lval = 0;
470 int ret;
471
472 if (index >= XWAY_GPHY_MAX_LEDS)
473 return -EINVAL;
474
475 if (rules & BIT(TRIGGER_NETDEV_LINK) ||
476 rules & BIT(TRIGGER_NETDEV_LINK_10))
477 hval |= XWAY_MMD_LEDxH_CON_LINK10;
478
479 if (rules & BIT(TRIGGER_NETDEV_LINK) ||
480 rules & BIT(TRIGGER_NETDEV_LINK_100))
481 hval |= XWAY_MMD_LEDxH_CON_LINK100;
482
483 if (rules & BIT(TRIGGER_NETDEV_LINK) ||
484 rules & BIT(TRIGGER_NETDEV_LINK_1000))
485 hval |= XWAY_MMD_LEDxH_CON_LINK1000;
486
487 if (rules & BIT(TRIGGER_NETDEV_TX))
488 lval |= XWAY_MMD_LEDxL_PULSE_TXACT;
489
490 if (rules & BIT(TRIGGER_NETDEV_RX))
491 lval |= XWAY_MMD_LEDxL_PULSE_RXACT;
492
493 ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDxH(index), hval);
494 if (ret)
495 return ret;
496
497 ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDxL(index), lval);
498 if (ret)
499 return ret;
500
501 return phy_set_bits(phydev, XWAY_MDIO_LED, XWAY_GPHY_LED_EN(index));
502}
503
504static int xway_gphy_led_polarity_set(struct phy_device *phydev, int index,
505 unsigned long modes)
506{
507 bool force_active_low = false, force_active_high = false;
508 u32 mode;
509
510 if (index >= XWAY_GPHY_MAX_LEDS)
511 return -EINVAL;
512
513 for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
514 switch (mode) {
515 case PHY_LED_ACTIVE_LOW:
516 force_active_low = true;
517 break;
518 case PHY_LED_ACTIVE_HIGH:
519 force_active_high = true;
520 break;
521 default:
522 return -EINVAL;
523 }
524 }
525
526 if (force_active_low)
527 return phy_set_bits(phydev, XWAY_MDIO_LED, XWAY_GPHY_LED_INV(index));
528
529 if (force_active_high)
530 return phy_clear_bits(phydev, XWAY_MDIO_LED, XWAY_GPHY_LED_INV(index));
531
532 return -EINVAL;
533}
534
535static struct phy_driver xway_gphy[] = {
536 {
537 .phy_id = PHY_ID_PHY11G_1_3,
538 .phy_id_mask = 0xffffffff,
539 .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
540 /* PHY_GBIT_FEATURES */
541 .config_init = xway_gphy_config_init,
542 .config_aneg = xway_gphy14_config_aneg,
543 .handle_interrupt = xway_gphy_handle_interrupt,
544 .config_intr = xway_gphy_config_intr,
545 .suspend = genphy_suspend,
546 .resume = genphy_resume,
547 .led_brightness_set = xway_gphy_led_brightness_set,
548 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
549 .led_hw_control_get = xway_gphy_led_hw_control_get,
550 .led_hw_control_set = xway_gphy_led_hw_control_set,
551 .led_polarity_set = xway_gphy_led_polarity_set,
552 }, {
553 .phy_id = PHY_ID_PHY22F_1_3,
554 .phy_id_mask = 0xffffffff,
555 .name = "Intel XWAY PHY22F (PEF 7061) v1.3",
556 /* PHY_BASIC_FEATURES */
557 .config_init = xway_gphy_config_init,
558 .config_aneg = xway_gphy14_config_aneg,
559 .handle_interrupt = xway_gphy_handle_interrupt,
560 .config_intr = xway_gphy_config_intr,
561 .suspend = genphy_suspend,
562 .resume = genphy_resume,
563 .led_brightness_set = xway_gphy_led_brightness_set,
564 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
565 .led_hw_control_get = xway_gphy_led_hw_control_get,
566 .led_hw_control_set = xway_gphy_led_hw_control_set,
567 .led_polarity_set = xway_gphy_led_polarity_set,
568 }, {
569 .phy_id = PHY_ID_PHY11G_1_4,
570 .phy_id_mask = 0xffffffff,
571 .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
572 /* PHY_GBIT_FEATURES */
573 .config_init = xway_gphy_config_init,
574 .config_aneg = xway_gphy14_config_aneg,
575 .handle_interrupt = xway_gphy_handle_interrupt,
576 .config_intr = xway_gphy_config_intr,
577 .suspend = genphy_suspend,
578 .resume = genphy_resume,
579 .led_brightness_set = xway_gphy_led_brightness_set,
580 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
581 .led_hw_control_get = xway_gphy_led_hw_control_get,
582 .led_hw_control_set = xway_gphy_led_hw_control_set,
583 .led_polarity_set = xway_gphy_led_polarity_set,
584 }, {
585 .phy_id = PHY_ID_PHY22F_1_4,
586 .phy_id_mask = 0xffffffff,
587 .name = "Intel XWAY PHY22F (PEF 7061) v1.4",
588 /* PHY_BASIC_FEATURES */
589 .config_init = xway_gphy_config_init,
590 .config_aneg = xway_gphy14_config_aneg,
591 .handle_interrupt = xway_gphy_handle_interrupt,
592 .config_intr = xway_gphy_config_intr,
593 .suspend = genphy_suspend,
594 .resume = genphy_resume,
595 .led_brightness_set = xway_gphy_led_brightness_set,
596 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
597 .led_hw_control_get = xway_gphy_led_hw_control_get,
598 .led_hw_control_set = xway_gphy_led_hw_control_set,
599 .led_polarity_set = xway_gphy_led_polarity_set,
600 }, {
601 .phy_id = PHY_ID_PHY11G_1_5,
602 .phy_id_mask = 0xffffffff,
603 .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
604 /* PHY_GBIT_FEATURES */
605 .config_init = xway_gphy_config_init,
606 .handle_interrupt = xway_gphy_handle_interrupt,
607 .config_intr = xway_gphy_config_intr,
608 .suspend = genphy_suspend,
609 .resume = genphy_resume,
610 .led_brightness_set = xway_gphy_led_brightness_set,
611 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
612 .led_hw_control_get = xway_gphy_led_hw_control_get,
613 .led_hw_control_set = xway_gphy_led_hw_control_set,
614 .led_polarity_set = xway_gphy_led_polarity_set,
615 }, {
616 .phy_id = PHY_ID_PHY22F_1_5,
617 .phy_id_mask = 0xffffffff,
618 .name = "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
619 /* PHY_BASIC_FEATURES */
620 .config_init = xway_gphy_config_init,
621 .handle_interrupt = xway_gphy_handle_interrupt,
622 .config_intr = xway_gphy_config_intr,
623 .suspend = genphy_suspend,
624 .resume = genphy_resume,
625 .led_brightness_set = xway_gphy_led_brightness_set,
626 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
627 .led_hw_control_get = xway_gphy_led_hw_control_get,
628 .led_hw_control_set = xway_gphy_led_hw_control_set,
629 .led_polarity_set = xway_gphy_led_polarity_set,
630 }, {
631 .phy_id = PHY_ID_PHY11G_VR9_1_1,
632 .phy_id_mask = 0xffffffff,
633 .name = "Intel XWAY PHY11G (xRX v1.1 integrated)",
634 /* PHY_GBIT_FEATURES */
635 .config_init = xway_gphy_config_init,
636 .handle_interrupt = xway_gphy_handle_interrupt,
637 .config_intr = xway_gphy_config_intr,
638 .suspend = genphy_suspend,
639 .resume = genphy_resume,
640 .led_brightness_set = xway_gphy_led_brightness_set,
641 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
642 .led_hw_control_get = xway_gphy_led_hw_control_get,
643 .led_hw_control_set = xway_gphy_led_hw_control_set,
644 .led_polarity_set = xway_gphy_led_polarity_set,
645 }, {
646 .phy_id = PHY_ID_PHY22F_VR9_1_1,
647 .phy_id_mask = 0xffffffff,
648 .name = "Intel XWAY PHY22F (xRX v1.1 integrated)",
649 /* PHY_BASIC_FEATURES */
650 .config_init = xway_gphy_config_init,
651 .handle_interrupt = xway_gphy_handle_interrupt,
652 .config_intr = xway_gphy_config_intr,
653 .suspend = genphy_suspend,
654 .resume = genphy_resume,
655 .led_brightness_set = xway_gphy_led_brightness_set,
656 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
657 .led_hw_control_get = xway_gphy_led_hw_control_get,
658 .led_hw_control_set = xway_gphy_led_hw_control_set,
659 .led_polarity_set = xway_gphy_led_polarity_set,
660 }, {
661 .phy_id = PHY_ID_PHY11G_VR9_1_2,
662 .phy_id_mask = 0xffffffff,
663 .name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
664 /* PHY_GBIT_FEATURES */
665 .config_init = xway_gphy_config_init,
666 .handle_interrupt = xway_gphy_handle_interrupt,
667 .config_intr = xway_gphy_config_intr,
668 .suspend = genphy_suspend,
669 .resume = genphy_resume,
670 .led_brightness_set = xway_gphy_led_brightness_set,
671 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
672 .led_hw_control_get = xway_gphy_led_hw_control_get,
673 .led_hw_control_set = xway_gphy_led_hw_control_set,
674 .led_polarity_set = xway_gphy_led_polarity_set,
675 }, {
676 .phy_id = PHY_ID_PHY22F_VR9_1_2,
677 .phy_id_mask = 0xffffffff,
678 .name = "Intel XWAY PHY22F (xRX v1.2 integrated)",
679 /* PHY_BASIC_FEATURES */
680 .config_init = xway_gphy_config_init,
681 .handle_interrupt = xway_gphy_handle_interrupt,
682 .config_intr = xway_gphy_config_intr,
683 .suspend = genphy_suspend,
684 .resume = genphy_resume,
685 .led_brightness_set = xway_gphy_led_brightness_set,
686 .led_hw_is_supported = xway_gphy_led_hw_is_supported,
687 .led_hw_control_get = xway_gphy_led_hw_control_get,
688 .led_hw_control_set = xway_gphy_led_hw_control_set,
689 .led_polarity_set = xway_gphy_led_polarity_set,
690 },
691};
692module_phy_driver(xway_gphy);
693
694static struct mdio_device_id __maybe_unused xway_gphy_tbl[] = {
695 { PHY_ID_PHY11G_1_3, 0xffffffff },
696 { PHY_ID_PHY22F_1_3, 0xffffffff },
697 { PHY_ID_PHY11G_1_4, 0xffffffff },
698 { PHY_ID_PHY22F_1_4, 0xffffffff },
699 { PHY_ID_PHY11G_1_5, 0xffffffff },
700 { PHY_ID_PHY22F_1_5, 0xffffffff },
701 { PHY_ID_PHY11G_VR9_1_1, 0xffffffff },
702 { PHY_ID_PHY22F_VR9_1_1, 0xffffffff },
703 { PHY_ID_PHY11G_VR9_1_2, 0xffffffff },
704 { PHY_ID_PHY22F_VR9_1_2, 0xffffffff },
705 { }
706};
707MODULE_DEVICE_TABLE(mdio, xway_gphy_tbl);
708
709MODULE_DESCRIPTION("Intel XWAY PHY driver");
710MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
4 * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
5 */
6
7#include <linux/mdio.h>
8#include <linux/module.h>
9#include <linux/phy.h>
10#include <linux/of.h>
11
12#define XWAY_MDIO_IMASK 0x19 /* interrupt mask */
13#define XWAY_MDIO_ISTAT 0x1A /* interrupt status */
14
15#define XWAY_MDIO_INIT_WOL BIT(15) /* Wake-On-LAN */
16#define XWAY_MDIO_INIT_MSRE BIT(14)
17#define XWAY_MDIO_INIT_NPRX BIT(13)
18#define XWAY_MDIO_INIT_NPTX BIT(12)
19#define XWAY_MDIO_INIT_ANE BIT(11) /* Auto-Neg error */
20#define XWAY_MDIO_INIT_ANC BIT(10) /* Auto-Neg complete */
21#define XWAY_MDIO_INIT_ADSC BIT(5) /* Link auto-downspeed detect */
22#define XWAY_MDIO_INIT_MPIPC BIT(4)
23#define XWAY_MDIO_INIT_MDIXC BIT(3)
24#define XWAY_MDIO_INIT_DXMC BIT(2) /* Duplex mode change */
25#define XWAY_MDIO_INIT_LSPC BIT(1) /* Link speed change */
26#define XWAY_MDIO_INIT_LSTC BIT(0) /* Link state change */
27#define XWAY_MDIO_INIT_MASK (XWAY_MDIO_INIT_LSTC | \
28 XWAY_MDIO_INIT_ADSC)
29
30#define ADVERTISED_MPD BIT(10) /* Multi-port device */
31
32/* LED Configuration */
33#define XWAY_MMD_LEDCH 0x01E0
34/* Inverse of SCAN Function */
35#define XWAY_MMD_LEDCH_NACS_NONE 0x0000
36#define XWAY_MMD_LEDCH_NACS_LINK 0x0001
37#define XWAY_MMD_LEDCH_NACS_PDOWN 0x0002
38#define XWAY_MMD_LEDCH_NACS_EEE 0x0003
39#define XWAY_MMD_LEDCH_NACS_ANEG 0x0004
40#define XWAY_MMD_LEDCH_NACS_ABIST 0x0005
41#define XWAY_MMD_LEDCH_NACS_CDIAG 0x0006
42#define XWAY_MMD_LEDCH_NACS_TEST 0x0007
43/* Slow Blink Frequency */
44#define XWAY_MMD_LEDCH_SBF_F02HZ 0x0000
45#define XWAY_MMD_LEDCH_SBF_F04HZ 0x0010
46#define XWAY_MMD_LEDCH_SBF_F08HZ 0x0020
47#define XWAY_MMD_LEDCH_SBF_F16HZ 0x0030
48/* Fast Blink Frequency */
49#define XWAY_MMD_LEDCH_FBF_F02HZ 0x0000
50#define XWAY_MMD_LEDCH_FBF_F04HZ 0x0040
51#define XWAY_MMD_LEDCH_FBF_F08HZ 0x0080
52#define XWAY_MMD_LEDCH_FBF_F16HZ 0x00C0
53/* LED Configuration */
54#define XWAY_MMD_LEDCL 0x01E1
55/* Complex Blinking Configuration */
56#define XWAY_MMD_LEDCH_CBLINK_NONE 0x0000
57#define XWAY_MMD_LEDCH_CBLINK_LINK 0x0001
58#define XWAY_MMD_LEDCH_CBLINK_PDOWN 0x0002
59#define XWAY_MMD_LEDCH_CBLINK_EEE 0x0003
60#define XWAY_MMD_LEDCH_CBLINK_ANEG 0x0004
61#define XWAY_MMD_LEDCH_CBLINK_ABIST 0x0005
62#define XWAY_MMD_LEDCH_CBLINK_CDIAG 0x0006
63#define XWAY_MMD_LEDCH_CBLINK_TEST 0x0007
64/* Complex SCAN Configuration */
65#define XWAY_MMD_LEDCH_SCAN_NONE 0x0000
66#define XWAY_MMD_LEDCH_SCAN_LINK 0x0010
67#define XWAY_MMD_LEDCH_SCAN_PDOWN 0x0020
68#define XWAY_MMD_LEDCH_SCAN_EEE 0x0030
69#define XWAY_MMD_LEDCH_SCAN_ANEG 0x0040
70#define XWAY_MMD_LEDCH_SCAN_ABIST 0x0050
71#define XWAY_MMD_LEDCH_SCAN_CDIAG 0x0060
72#define XWAY_MMD_LEDCH_SCAN_TEST 0x0070
73/* Configuration for LED Pin x */
74#define XWAY_MMD_LED0H 0x01E2
75/* Fast Blinking Configuration */
76#define XWAY_MMD_LEDxH_BLINKF_MASK 0x000F
77#define XWAY_MMD_LEDxH_BLINKF_NONE 0x0000
78#define XWAY_MMD_LEDxH_BLINKF_LINK10 0x0001
79#define XWAY_MMD_LEDxH_BLINKF_LINK100 0x0002
80#define XWAY_MMD_LEDxH_BLINKF_LINK10X 0x0003
81#define XWAY_MMD_LEDxH_BLINKF_LINK1000 0x0004
82#define XWAY_MMD_LEDxH_BLINKF_LINK10_0 0x0005
83#define XWAY_MMD_LEDxH_BLINKF_LINK100X 0x0006
84#define XWAY_MMD_LEDxH_BLINKF_LINK10XX 0x0007
85#define XWAY_MMD_LEDxH_BLINKF_PDOWN 0x0008
86#define XWAY_MMD_LEDxH_BLINKF_EEE 0x0009
87#define XWAY_MMD_LEDxH_BLINKF_ANEG 0x000A
88#define XWAY_MMD_LEDxH_BLINKF_ABIST 0x000B
89#define XWAY_MMD_LEDxH_BLINKF_CDIAG 0x000C
90/* Constant On Configuration */
91#define XWAY_MMD_LEDxH_CON_MASK 0x00F0
92#define XWAY_MMD_LEDxH_CON_NONE 0x0000
93#define XWAY_MMD_LEDxH_CON_LINK10 0x0010
94#define XWAY_MMD_LEDxH_CON_LINK100 0x0020
95#define XWAY_MMD_LEDxH_CON_LINK10X 0x0030
96#define XWAY_MMD_LEDxH_CON_LINK1000 0x0040
97#define XWAY_MMD_LEDxH_CON_LINK10_0 0x0050
98#define XWAY_MMD_LEDxH_CON_LINK100X 0x0060
99#define XWAY_MMD_LEDxH_CON_LINK10XX 0x0070
100#define XWAY_MMD_LEDxH_CON_PDOWN 0x0080
101#define XWAY_MMD_LEDxH_CON_EEE 0x0090
102#define XWAY_MMD_LEDxH_CON_ANEG 0x00A0
103#define XWAY_MMD_LEDxH_CON_ABIST 0x00B0
104#define XWAY_MMD_LEDxH_CON_CDIAG 0x00C0
105#define XWAY_MMD_LEDxH_CON_COPPER 0x00D0
106#define XWAY_MMD_LEDxH_CON_FIBER 0x00E0
107/* Configuration for LED Pin x */
108#define XWAY_MMD_LED0L 0x01E3
109/* Pulsing Configuration */
110#define XWAY_MMD_LEDxL_PULSE_MASK 0x000F
111#define XWAY_MMD_LEDxL_PULSE_NONE 0x0000
112#define XWAY_MMD_LEDxL_PULSE_TXACT 0x0001
113#define XWAY_MMD_LEDxL_PULSE_RXACT 0x0002
114#define XWAY_MMD_LEDxL_PULSE_COL 0x0004
115/* Slow Blinking Configuration */
116#define XWAY_MMD_LEDxL_BLINKS_MASK 0x00F0
117#define XWAY_MMD_LEDxL_BLINKS_NONE 0x0000
118#define XWAY_MMD_LEDxL_BLINKS_LINK10 0x0010
119#define XWAY_MMD_LEDxL_BLINKS_LINK100 0x0020
120#define XWAY_MMD_LEDxL_BLINKS_LINK10X 0x0030
121#define XWAY_MMD_LEDxL_BLINKS_LINK1000 0x0040
122#define XWAY_MMD_LEDxL_BLINKS_LINK10_0 0x0050
123#define XWAY_MMD_LEDxL_BLINKS_LINK100X 0x0060
124#define XWAY_MMD_LEDxL_BLINKS_LINK10XX 0x0070
125#define XWAY_MMD_LEDxL_BLINKS_PDOWN 0x0080
126#define XWAY_MMD_LEDxL_BLINKS_EEE 0x0090
127#define XWAY_MMD_LEDxL_BLINKS_ANEG 0x00A0
128#define XWAY_MMD_LEDxL_BLINKS_ABIST 0x00B0
129#define XWAY_MMD_LEDxL_BLINKS_CDIAG 0x00C0
130#define XWAY_MMD_LED1H 0x01E4
131#define XWAY_MMD_LED1L 0x01E5
132#define XWAY_MMD_LED2H 0x01E6
133#define XWAY_MMD_LED2L 0x01E7
134#define XWAY_MMD_LED3H 0x01E8
135#define XWAY_MMD_LED3L 0x01E9
136
137#define PHY_ID_PHY11G_1_3 0x030260D1
138#define PHY_ID_PHY22F_1_3 0x030260E1
139#define PHY_ID_PHY11G_1_4 0xD565A400
140#define PHY_ID_PHY22F_1_4 0xD565A410
141#define PHY_ID_PHY11G_1_5 0xD565A401
142#define PHY_ID_PHY22F_1_5 0xD565A411
143#define PHY_ID_PHY11G_VR9_1_1 0xD565A408
144#define PHY_ID_PHY22F_VR9_1_1 0xD565A418
145#define PHY_ID_PHY11G_VR9_1_2 0xD565A409
146#define PHY_ID_PHY22F_VR9_1_2 0xD565A419
147
148static int xway_gphy_config_init(struct phy_device *phydev)
149{
150 int err;
151 u32 ledxh;
152 u32 ledxl;
153
154 /* Mask all interrupts */
155 err = phy_write(phydev, XWAY_MDIO_IMASK, 0);
156 if (err)
157 return err;
158
159 /* Clear all pending interrupts */
160 phy_read(phydev, XWAY_MDIO_ISTAT);
161
162 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH,
163 XWAY_MMD_LEDCH_NACS_NONE |
164 XWAY_MMD_LEDCH_SBF_F02HZ |
165 XWAY_MMD_LEDCH_FBF_F16HZ);
166 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCL,
167 XWAY_MMD_LEDCH_CBLINK_NONE |
168 XWAY_MMD_LEDCH_SCAN_NONE);
169
170 /**
171 * In most cases only one LED is connected to this phy, so
172 * configure them all to constant on and pulse mode. LED3 is
173 * only available in some packages, leave it in its reset
174 * configuration.
175 */
176 ledxh = XWAY_MMD_LEDxH_BLINKF_NONE | XWAY_MMD_LEDxH_CON_LINK10XX;
177 ledxl = XWAY_MMD_LEDxL_PULSE_TXACT | XWAY_MMD_LEDxL_PULSE_RXACT |
178 XWAY_MMD_LEDxL_BLINKS_NONE;
179 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0H, ledxh);
180 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0L, ledxl);
181 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1H, ledxh);
182 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1L, ledxl);
183 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
184 phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
185
186 return 0;
187}
188
189static int xway_gphy14_config_aneg(struct phy_device *phydev)
190{
191 int reg, err;
192
193 /* Advertise as multi-port device, see IEEE802.3-2002 40.5.1.1 */
194 /* This is a workaround for an errata in rev < 1.5 devices */
195 reg = phy_read(phydev, MII_CTRL1000);
196 reg |= ADVERTISED_MPD;
197 err = phy_write(phydev, MII_CTRL1000, reg);
198 if (err)
199 return err;
200
201 return genphy_config_aneg(phydev);
202}
203
204static int xway_gphy_ack_interrupt(struct phy_device *phydev)
205{
206 int reg;
207
208 reg = phy_read(phydev, XWAY_MDIO_ISTAT);
209 return (reg < 0) ? reg : 0;
210}
211
212static int xway_gphy_did_interrupt(struct phy_device *phydev)
213{
214 int reg;
215
216 reg = phy_read(phydev, XWAY_MDIO_ISTAT);
217 return reg & XWAY_MDIO_INIT_MASK;
218}
219
220static int xway_gphy_config_intr(struct phy_device *phydev)
221{
222 u16 mask = 0;
223
224 if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
225 mask = XWAY_MDIO_INIT_MASK;
226
227 return phy_write(phydev, XWAY_MDIO_IMASK, mask);
228}
229
230static struct phy_driver xway_gphy[] = {
231 {
232 .phy_id = PHY_ID_PHY11G_1_3,
233 .phy_id_mask = 0xffffffff,
234 .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
235 /* PHY_GBIT_FEATURES */
236 .config_init = xway_gphy_config_init,
237 .config_aneg = xway_gphy14_config_aneg,
238 .ack_interrupt = xway_gphy_ack_interrupt,
239 .did_interrupt = xway_gphy_did_interrupt,
240 .config_intr = xway_gphy_config_intr,
241 .suspend = genphy_suspend,
242 .resume = genphy_resume,
243 }, {
244 .phy_id = PHY_ID_PHY22F_1_3,
245 .phy_id_mask = 0xffffffff,
246 .name = "Intel XWAY PHY22F (PEF 7061) v1.3",
247 /* PHY_BASIC_FEATURES */
248 .config_init = xway_gphy_config_init,
249 .config_aneg = xway_gphy14_config_aneg,
250 .ack_interrupt = xway_gphy_ack_interrupt,
251 .did_interrupt = xway_gphy_did_interrupt,
252 .config_intr = xway_gphy_config_intr,
253 .suspend = genphy_suspend,
254 .resume = genphy_resume,
255 }, {
256 .phy_id = PHY_ID_PHY11G_1_4,
257 .phy_id_mask = 0xffffffff,
258 .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
259 /* PHY_GBIT_FEATURES */
260 .config_init = xway_gphy_config_init,
261 .config_aneg = xway_gphy14_config_aneg,
262 .ack_interrupt = xway_gphy_ack_interrupt,
263 .did_interrupt = xway_gphy_did_interrupt,
264 .config_intr = xway_gphy_config_intr,
265 .suspend = genphy_suspend,
266 .resume = genphy_resume,
267 }, {
268 .phy_id = PHY_ID_PHY22F_1_4,
269 .phy_id_mask = 0xffffffff,
270 .name = "Intel XWAY PHY22F (PEF 7061) v1.4",
271 /* PHY_BASIC_FEATURES */
272 .config_init = xway_gphy_config_init,
273 .config_aneg = xway_gphy14_config_aneg,
274 .ack_interrupt = xway_gphy_ack_interrupt,
275 .did_interrupt = xway_gphy_did_interrupt,
276 .config_intr = xway_gphy_config_intr,
277 .suspend = genphy_suspend,
278 .resume = genphy_resume,
279 }, {
280 .phy_id = PHY_ID_PHY11G_1_5,
281 .phy_id_mask = 0xffffffff,
282 .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
283 /* PHY_GBIT_FEATURES */
284 .config_init = xway_gphy_config_init,
285 .ack_interrupt = xway_gphy_ack_interrupt,
286 .did_interrupt = xway_gphy_did_interrupt,
287 .config_intr = xway_gphy_config_intr,
288 .suspend = genphy_suspend,
289 .resume = genphy_resume,
290 }, {
291 .phy_id = PHY_ID_PHY22F_1_5,
292 .phy_id_mask = 0xffffffff,
293 .name = "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
294 /* PHY_BASIC_FEATURES */
295 .config_init = xway_gphy_config_init,
296 .ack_interrupt = xway_gphy_ack_interrupt,
297 .did_interrupt = xway_gphy_did_interrupt,
298 .config_intr = xway_gphy_config_intr,
299 .suspend = genphy_suspend,
300 .resume = genphy_resume,
301 }, {
302 .phy_id = PHY_ID_PHY11G_VR9_1_1,
303 .phy_id_mask = 0xffffffff,
304 .name = "Intel XWAY PHY11G (xRX v1.1 integrated)",
305 /* PHY_GBIT_FEATURES */
306 .config_init = xway_gphy_config_init,
307 .ack_interrupt = xway_gphy_ack_interrupt,
308 .did_interrupt = xway_gphy_did_interrupt,
309 .config_intr = xway_gphy_config_intr,
310 .suspend = genphy_suspend,
311 .resume = genphy_resume,
312 }, {
313 .phy_id = PHY_ID_PHY22F_VR9_1_1,
314 .phy_id_mask = 0xffffffff,
315 .name = "Intel XWAY PHY22F (xRX v1.1 integrated)",
316 /* PHY_BASIC_FEATURES */
317 .config_init = xway_gphy_config_init,
318 .ack_interrupt = xway_gphy_ack_interrupt,
319 .did_interrupt = xway_gphy_did_interrupt,
320 .config_intr = xway_gphy_config_intr,
321 .suspend = genphy_suspend,
322 .resume = genphy_resume,
323 }, {
324 .phy_id = PHY_ID_PHY11G_VR9_1_2,
325 .phy_id_mask = 0xffffffff,
326 .name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
327 /* PHY_GBIT_FEATURES */
328 .config_init = xway_gphy_config_init,
329 .ack_interrupt = xway_gphy_ack_interrupt,
330 .did_interrupt = xway_gphy_did_interrupt,
331 .config_intr = xway_gphy_config_intr,
332 .suspend = genphy_suspend,
333 .resume = genphy_resume,
334 }, {
335 .phy_id = PHY_ID_PHY22F_VR9_1_2,
336 .phy_id_mask = 0xffffffff,
337 .name = "Intel XWAY PHY22F (xRX v1.2 integrated)",
338 /* PHY_BASIC_FEATURES */
339 .config_init = xway_gphy_config_init,
340 .ack_interrupt = xway_gphy_ack_interrupt,
341 .did_interrupt = xway_gphy_did_interrupt,
342 .config_intr = xway_gphy_config_intr,
343 .suspend = genphy_suspend,
344 .resume = genphy_resume,
345 },
346};
347module_phy_driver(xway_gphy);
348
349static struct mdio_device_id __maybe_unused xway_gphy_tbl[] = {
350 { PHY_ID_PHY11G_1_3, 0xffffffff },
351 { PHY_ID_PHY22F_1_3, 0xffffffff },
352 { PHY_ID_PHY11G_1_4, 0xffffffff },
353 { PHY_ID_PHY22F_1_4, 0xffffffff },
354 { PHY_ID_PHY11G_1_5, 0xffffffff },
355 { PHY_ID_PHY22F_1_5, 0xffffffff },
356 { PHY_ID_PHY11G_VR9_1_1, 0xffffffff },
357 { PHY_ID_PHY22F_VR9_1_1, 0xffffffff },
358 { PHY_ID_PHY11G_VR9_1_2, 0xffffffff },
359 { PHY_ID_PHY22F_VR9_1_2, 0xffffffff },
360 { }
361};
362MODULE_DEVICE_TABLE(mdio, xway_gphy_tbl);
363
364MODULE_DESCRIPTION("Intel XWAY PHY driver");
365MODULE_LICENSE("GPL");