Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (c) 2012-2022, Intel Corporation. All rights reserved.
4 * Intel Management Engine Interface (Intel MEI) Linux driver
5 */
6
7#include <linux/export.h>
8#include <linux/sched.h>
9#include <linux/wait.h>
10#include <linux/delay.h>
11
12#include <linux/mei.h>
13
14#include "mei_dev.h"
15#include "hbm.h"
16#include "client.h"
17
18const char *mei_dev_state_str(int state)
19{
20#define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state
21 switch (state) {
22 MEI_DEV_STATE(INITIALIZING);
23 MEI_DEV_STATE(INIT_CLIENTS);
24 MEI_DEV_STATE(ENABLED);
25 MEI_DEV_STATE(RESETTING);
26 MEI_DEV_STATE(DISABLED);
27 MEI_DEV_STATE(POWERING_DOWN);
28 MEI_DEV_STATE(POWER_DOWN);
29 MEI_DEV_STATE(POWER_UP);
30 default:
31 return "unknown";
32 }
33#undef MEI_DEV_STATE
34}
35
36const char *mei_pg_state_str(enum mei_pg_state state)
37{
38#define MEI_PG_STATE(state) case MEI_PG_##state: return #state
39 switch (state) {
40 MEI_PG_STATE(OFF);
41 MEI_PG_STATE(ON);
42 default:
43 return "unknown";
44 }
45#undef MEI_PG_STATE
46}
47
48/**
49 * mei_fw_status2str - convert fw status registers to printable string
50 *
51 * @fw_status: firmware status
52 * @buf: string buffer at minimal size MEI_FW_STATUS_STR_SZ
53 * @len: buffer len must be >= MEI_FW_STATUS_STR_SZ
54 *
55 * Return: number of bytes written or -EINVAL if buffer is to small
56 */
57ssize_t mei_fw_status2str(struct mei_fw_status *fw_status,
58 char *buf, size_t len)
59{
60 ssize_t cnt = 0;
61 int i;
62
63 buf[0] = '\0';
64
65 if (len < MEI_FW_STATUS_STR_SZ)
66 return -EINVAL;
67
68 for (i = 0; i < fw_status->count; i++)
69 cnt += scnprintf(buf + cnt, len - cnt, "%08X ",
70 fw_status->status[i]);
71
72 /* drop last space */
73 buf[cnt] = '\0';
74 return cnt;
75}
76EXPORT_SYMBOL_GPL(mei_fw_status2str);
77
78/**
79 * mei_cancel_work - Cancel mei background jobs
80 *
81 * @dev: the device structure
82 */
83void mei_cancel_work(struct mei_device *dev)
84{
85 cancel_work_sync(&dev->reset_work);
86 cancel_work_sync(&dev->bus_rescan_work);
87
88 cancel_delayed_work_sync(&dev->timer_work);
89}
90EXPORT_SYMBOL_GPL(mei_cancel_work);
91
92static void mei_save_fw_status(struct mei_device *dev)
93{
94 struct mei_fw_status fw_status;
95 int ret;
96
97 ret = mei_fw_status(dev, &fw_status);
98 if (ret) {
99 dev_err(dev->dev, "failed to read firmware status: %d\n", ret);
100 return;
101 }
102
103 dev->saved_dev_state = dev->dev_state;
104 dev->saved_fw_status_flag = true;
105 memcpy(&dev->saved_fw_status, &fw_status, sizeof(fw_status));
106}
107
108/**
109 * mei_reset - resets host and fw.
110 *
111 * @dev: the device structure
112 *
113 * Return: 0 on success or < 0 if the reset hasn't succeeded
114 */
115int mei_reset(struct mei_device *dev)
116{
117 enum mei_dev_state state = dev->dev_state;
118 bool interrupts_enabled;
119 int ret;
120
121 if (state != MEI_DEV_INITIALIZING &&
122 state != MEI_DEV_DISABLED &&
123 state != MEI_DEV_POWER_DOWN &&
124 state != MEI_DEV_POWER_UP) {
125 char fw_sts_str[MEI_FW_STATUS_STR_SZ];
126
127 mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
128 if (kind_is_gsc(dev) || kind_is_gscfi(dev)) {
129 dev_dbg(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n",
130 mei_dev_state_str(state), fw_sts_str);
131 mei_save_fw_status(dev);
132 } else {
133 dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n",
134 mei_dev_state_str(state), fw_sts_str);
135 }
136 }
137
138 mei_clear_interrupts(dev);
139
140 /* we're already in reset, cancel the init timer
141 * if the reset was called due the hbm protocol error
142 * we need to call it before hw start
143 * so the hbm watchdog won't kick in
144 */
145 mei_hbm_idle(dev);
146
147 /* enter reset flow */
148 interrupts_enabled = state != MEI_DEV_POWER_DOWN;
149 mei_set_devstate(dev, MEI_DEV_RESETTING);
150
151 dev->reset_count++;
152 if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
153 dev_err(dev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
154 mei_set_devstate(dev, MEI_DEV_DISABLED);
155 return -ENODEV;
156 }
157
158 ret = mei_hw_reset(dev, interrupts_enabled);
159 /* fall through and remove the sw state even if hw reset has failed */
160
161 /* no need to clean up software state in case of power up */
162 if (state != MEI_DEV_INITIALIZING && state != MEI_DEV_POWER_UP)
163 mei_cl_all_disconnect(dev);
164
165 mei_hbm_reset(dev);
166
167 /* clean stale FW version */
168 dev->fw_ver_received = 0;
169
170 memset(dev->rd_msg_hdr, 0, sizeof(dev->rd_msg_hdr));
171
172 if (ret) {
173 dev_err(dev->dev, "hw_reset failed ret = %d\n", ret);
174 return ret;
175 }
176
177 if (state == MEI_DEV_POWER_DOWN) {
178 dev_dbg(dev->dev, "powering down: end of reset\n");
179 mei_set_devstate(dev, MEI_DEV_DISABLED);
180 return 0;
181 }
182
183 ret = mei_hw_start(dev);
184 if (ret) {
185 char fw_sts_str[MEI_FW_STATUS_STR_SZ];
186
187 mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
188 dev_err(dev->dev, "hw_start failed ret = %d fw status = %s\n", ret, fw_sts_str);
189 return ret;
190 }
191
192 if (dev->dev_state != MEI_DEV_RESETTING) {
193 dev_dbg(dev->dev, "wrong state = %d on link start\n", dev->dev_state);
194 return 0;
195 }
196
197 dev_dbg(dev->dev, "link is established start sending messages.\n");
198
199 mei_set_devstate(dev, MEI_DEV_INIT_CLIENTS);
200 ret = mei_hbm_start_req(dev);
201 if (ret) {
202 dev_err(dev->dev, "hbm_start failed ret = %d\n", ret);
203 mei_set_devstate(dev, MEI_DEV_RESETTING);
204 return ret;
205 }
206
207 return 0;
208}
209EXPORT_SYMBOL_GPL(mei_reset);
210
211/**
212 * mei_start - initializes host and fw to start work.
213 *
214 * @dev: the device structure
215 *
216 * Return: 0 on success, <0 on failure.
217 */
218int mei_start(struct mei_device *dev)
219{
220 int ret;
221
222 mutex_lock(&dev->device_lock);
223
224 /* acknowledge interrupt and stop interrupts */
225 mei_clear_interrupts(dev);
226
227 ret = mei_hw_config(dev);
228 if (ret)
229 goto err;
230
231 dev_dbg(dev->dev, "reset in start the mei device.\n");
232
233 dev->reset_count = 0;
234 do {
235 mei_set_devstate(dev, MEI_DEV_INITIALIZING);
236 ret = mei_reset(dev);
237
238 if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
239 dev_err(dev->dev, "reset failed ret = %d", ret);
240 goto err;
241 }
242 } while (ret);
243
244 if (mei_hbm_start_wait(dev)) {
245 dev_err(dev->dev, "HBM haven't started");
246 goto err;
247 }
248
249 if (!mei_hbm_version_is_supported(dev)) {
250 dev_dbg(dev->dev, "MEI start failed.\n");
251 goto err;
252 }
253
254 dev_dbg(dev->dev, "link layer has been established.\n");
255
256 mutex_unlock(&dev->device_lock);
257 return 0;
258err:
259 dev_err(dev->dev, "link layer initialization failed.\n");
260 mei_set_devstate(dev, MEI_DEV_DISABLED);
261 mutex_unlock(&dev->device_lock);
262 return -ENODEV;
263}
264EXPORT_SYMBOL_GPL(mei_start);
265
266/**
267 * mei_restart - restart device after suspend
268 *
269 * @dev: the device structure
270 *
271 * Return: 0 on success or -ENODEV if the restart hasn't succeeded
272 */
273int mei_restart(struct mei_device *dev)
274{
275 int err;
276
277 mutex_lock(&dev->device_lock);
278
279 mei_set_devstate(dev, MEI_DEV_POWER_UP);
280 dev->reset_count = 0;
281
282 err = mei_reset(dev);
283
284 mutex_unlock(&dev->device_lock);
285
286 if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
287 dev_err(dev->dev, "device disabled = %d\n", err);
288 return -ENODEV;
289 }
290
291 /* try to start again */
292 if (err)
293 schedule_work(&dev->reset_work);
294
295
296 return 0;
297}
298EXPORT_SYMBOL_GPL(mei_restart);
299
300static void mei_reset_work(struct work_struct *work)
301{
302 struct mei_device *dev =
303 container_of(work, struct mei_device, reset_work);
304 int ret;
305
306 mei_clear_interrupts(dev);
307 mei_synchronize_irq(dev);
308
309 mutex_lock(&dev->device_lock);
310
311 ret = mei_reset(dev);
312
313 mutex_unlock(&dev->device_lock);
314
315 if (dev->dev_state == MEI_DEV_DISABLED) {
316 dev_err(dev->dev, "device disabled = %d\n", ret);
317 return;
318 }
319
320 /* retry reset in case of failure */
321 if (ret)
322 schedule_work(&dev->reset_work);
323}
324
325void mei_stop(struct mei_device *dev)
326{
327 dev_dbg(dev->dev, "stopping the device.\n");
328
329 mutex_lock(&dev->device_lock);
330 mei_set_devstate(dev, MEI_DEV_POWERING_DOWN);
331 mutex_unlock(&dev->device_lock);
332 mei_cl_bus_remove_devices(dev);
333 mutex_lock(&dev->device_lock);
334 mei_set_devstate(dev, MEI_DEV_POWER_DOWN);
335 mutex_unlock(&dev->device_lock);
336
337 mei_cancel_work(dev);
338
339 mei_clear_interrupts(dev);
340 mei_synchronize_irq(dev);
341 /* to catch HW-initiated reset */
342 mei_cancel_work(dev);
343
344 mutex_lock(&dev->device_lock);
345
346 mei_reset(dev);
347 /* move device to disabled state unconditionally */
348 mei_set_devstate(dev, MEI_DEV_DISABLED);
349
350 mutex_unlock(&dev->device_lock);
351}
352EXPORT_SYMBOL_GPL(mei_stop);
353
354/**
355 * mei_write_is_idle - check if the write queues are idle
356 *
357 * @dev: the device structure
358 *
359 * Return: true of there is no pending write
360 */
361bool mei_write_is_idle(struct mei_device *dev)
362{
363 bool idle = (dev->dev_state == MEI_DEV_ENABLED &&
364 list_empty(&dev->ctrl_wr_list) &&
365 list_empty(&dev->write_list) &&
366 list_empty(&dev->write_waiting_list));
367
368 dev_dbg(dev->dev, "write pg: is idle[%d] state=%s ctrl=%01d write=%01d wwait=%01d\n",
369 idle,
370 mei_dev_state_str(dev->dev_state),
371 list_empty(&dev->ctrl_wr_list),
372 list_empty(&dev->write_list),
373 list_empty(&dev->write_waiting_list));
374
375 return idle;
376}
377EXPORT_SYMBOL_GPL(mei_write_is_idle);
378
379/**
380 * mei_device_init - initialize mei_device structure
381 *
382 * @dev: the mei device
383 * @device: the device structure
384 * @slow_fw: configure longer timeouts as FW is slow
385 * @hw_ops: hw operations
386 */
387void mei_device_init(struct mei_device *dev,
388 struct device *device,
389 bool slow_fw,
390 const struct mei_hw_ops *hw_ops)
391{
392 /* setup our list array */
393 INIT_LIST_HEAD(&dev->file_list);
394 INIT_LIST_HEAD(&dev->device_list);
395 INIT_LIST_HEAD(&dev->me_clients);
396 mutex_init(&dev->device_lock);
397 init_rwsem(&dev->me_clients_rwsem);
398 mutex_init(&dev->cl_bus_lock);
399 init_waitqueue_head(&dev->wait_hw_ready);
400 init_waitqueue_head(&dev->wait_pg);
401 init_waitqueue_head(&dev->wait_hbm_start);
402 dev->dev_state = MEI_DEV_INITIALIZING;
403 dev->reset_count = 0;
404
405 INIT_LIST_HEAD(&dev->write_list);
406 INIT_LIST_HEAD(&dev->write_waiting_list);
407 INIT_LIST_HEAD(&dev->ctrl_wr_list);
408 INIT_LIST_HEAD(&dev->ctrl_rd_list);
409 dev->tx_queue_limit = MEI_TX_QUEUE_LIMIT_DEFAULT;
410
411 INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
412 INIT_WORK(&dev->reset_work, mei_reset_work);
413 INIT_WORK(&dev->bus_rescan_work, mei_cl_bus_rescan_work);
414
415 bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
416 dev->open_handle_count = 0;
417
418 dev->pxp_mode = MEI_DEV_PXP_DEFAULT;
419 dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_DEFAULT;
420
421 /*
422 * Reserving the first client ID
423 * 0: Reserved for MEI Bus Message communications
424 */
425 bitmap_set(dev->host_clients_map, 0, 1);
426
427 dev->pg_event = MEI_PG_EVENT_IDLE;
428 dev->ops = hw_ops;
429 dev->dev = device;
430
431 dev->timeouts.hw_ready = mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT);
432 dev->timeouts.connect = MEI_CONNECT_TIMEOUT;
433 dev->timeouts.client_init = MEI_CLIENTS_INIT_TIMEOUT;
434 dev->timeouts.pgi = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
435 dev->timeouts.d0i3 = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
436 if (slow_fw) {
437 dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT_SLOW);
438 dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT_SLOW);
439 dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT_SLOW);
440 } else {
441 dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT);
442 dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT);
443 dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT);
444 }
445}
446EXPORT_SYMBOL_GPL(mei_device_init);
447
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (c) 2012-2018, Intel Corporation. All rights reserved.
4 * Intel Management Engine Interface (Intel MEI) Linux driver
5 */
6
7#include <linux/export.h>
8#include <linux/sched.h>
9#include <linux/wait.h>
10#include <linux/delay.h>
11
12#include <linux/mei.h>
13
14#include "mei_dev.h"
15#include "hbm.h"
16#include "client.h"
17
18const char *mei_dev_state_str(int state)
19{
20#define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state
21 switch (state) {
22 MEI_DEV_STATE(INITIALIZING);
23 MEI_DEV_STATE(INIT_CLIENTS);
24 MEI_DEV_STATE(ENABLED);
25 MEI_DEV_STATE(RESETTING);
26 MEI_DEV_STATE(DISABLED);
27 MEI_DEV_STATE(POWER_DOWN);
28 MEI_DEV_STATE(POWER_UP);
29 default:
30 return "unknown";
31 }
32#undef MEI_DEV_STATE
33}
34
35const char *mei_pg_state_str(enum mei_pg_state state)
36{
37#define MEI_PG_STATE(state) case MEI_PG_##state: return #state
38 switch (state) {
39 MEI_PG_STATE(OFF);
40 MEI_PG_STATE(ON);
41 default:
42 return "unknown";
43 }
44#undef MEI_PG_STATE
45}
46
47/**
48 * mei_fw_status2str - convert fw status registers to printable string
49 *
50 * @fw_status: firmware status
51 * @buf: string buffer at minimal size MEI_FW_STATUS_STR_SZ
52 * @len: buffer len must be >= MEI_FW_STATUS_STR_SZ
53 *
54 * Return: number of bytes written or -EINVAL if buffer is to small
55 */
56ssize_t mei_fw_status2str(struct mei_fw_status *fw_status,
57 char *buf, size_t len)
58{
59 ssize_t cnt = 0;
60 int i;
61
62 buf[0] = '\0';
63
64 if (len < MEI_FW_STATUS_STR_SZ)
65 return -EINVAL;
66
67 for (i = 0; i < fw_status->count; i++)
68 cnt += scnprintf(buf + cnt, len - cnt, "%08X ",
69 fw_status->status[i]);
70
71 /* drop last space */
72 buf[cnt] = '\0';
73 return cnt;
74}
75EXPORT_SYMBOL_GPL(mei_fw_status2str);
76
77/**
78 * mei_cancel_work - Cancel mei background jobs
79 *
80 * @dev: the device structure
81 */
82void mei_cancel_work(struct mei_device *dev)
83{
84 cancel_work_sync(&dev->reset_work);
85 cancel_work_sync(&dev->bus_rescan_work);
86
87 cancel_delayed_work_sync(&dev->timer_work);
88}
89EXPORT_SYMBOL_GPL(mei_cancel_work);
90
91/**
92 * mei_reset - resets host and fw.
93 *
94 * @dev: the device structure
95 *
96 * Return: 0 on success or < 0 if the reset hasn't succeeded
97 */
98int mei_reset(struct mei_device *dev)
99{
100 enum mei_dev_state state = dev->dev_state;
101 bool interrupts_enabled;
102 int ret;
103
104 if (state != MEI_DEV_INITIALIZING &&
105 state != MEI_DEV_DISABLED &&
106 state != MEI_DEV_POWER_DOWN &&
107 state != MEI_DEV_POWER_UP) {
108 char fw_sts_str[MEI_FW_STATUS_STR_SZ];
109
110 mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
111 dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n",
112 mei_dev_state_str(state), fw_sts_str);
113 }
114
115 mei_clear_interrupts(dev);
116
117 /* we're already in reset, cancel the init timer
118 * if the reset was called due the hbm protocol error
119 * we need to call it before hw start
120 * so the hbm watchdog won't kick in
121 */
122 mei_hbm_idle(dev);
123
124 /* enter reset flow */
125 interrupts_enabled = state != MEI_DEV_POWER_DOWN;
126 mei_set_devstate(dev, MEI_DEV_RESETTING);
127
128 dev->reset_count++;
129 if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
130 dev_err(dev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
131 mei_set_devstate(dev, MEI_DEV_DISABLED);
132 return -ENODEV;
133 }
134
135 ret = mei_hw_reset(dev, interrupts_enabled);
136 /* fall through and remove the sw state even if hw reset has failed */
137
138 /* no need to clean up software state in case of power up */
139 if (state != MEI_DEV_INITIALIZING && state != MEI_DEV_POWER_UP)
140 mei_cl_all_disconnect(dev);
141
142 mei_hbm_reset(dev);
143
144 memset(dev->rd_msg_hdr, 0, sizeof(dev->rd_msg_hdr));
145
146 if (ret) {
147 dev_err(dev->dev, "hw_reset failed ret = %d\n", ret);
148 return ret;
149 }
150
151 if (state == MEI_DEV_POWER_DOWN) {
152 dev_dbg(dev->dev, "powering down: end of reset\n");
153 mei_set_devstate(dev, MEI_DEV_DISABLED);
154 return 0;
155 }
156
157 ret = mei_hw_start(dev);
158 if (ret) {
159 dev_err(dev->dev, "hw_start failed ret = %d\n", ret);
160 return ret;
161 }
162
163 dev_dbg(dev->dev, "link is established start sending messages.\n");
164
165 mei_set_devstate(dev, MEI_DEV_INIT_CLIENTS);
166 ret = mei_hbm_start_req(dev);
167 if (ret) {
168 dev_err(dev->dev, "hbm_start failed ret = %d\n", ret);
169 mei_set_devstate(dev, MEI_DEV_RESETTING);
170 return ret;
171 }
172
173 return 0;
174}
175EXPORT_SYMBOL_GPL(mei_reset);
176
177/**
178 * mei_start - initializes host and fw to start work.
179 *
180 * @dev: the device structure
181 *
182 * Return: 0 on success, <0 on failure.
183 */
184int mei_start(struct mei_device *dev)
185{
186 int ret;
187
188 mutex_lock(&dev->device_lock);
189
190 /* acknowledge interrupt and stop interrupts */
191 mei_clear_interrupts(dev);
192
193 mei_hw_config(dev);
194
195 dev_dbg(dev->dev, "reset in start the mei device.\n");
196
197 dev->reset_count = 0;
198 do {
199 mei_set_devstate(dev, MEI_DEV_INITIALIZING);
200 ret = mei_reset(dev);
201
202 if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
203 dev_err(dev->dev, "reset failed ret = %d", ret);
204 goto err;
205 }
206 } while (ret);
207
208 if (mei_hbm_start_wait(dev)) {
209 dev_err(dev->dev, "HBM haven't started");
210 goto err;
211 }
212
213 if (!mei_host_is_ready(dev)) {
214 dev_err(dev->dev, "host is not ready.\n");
215 goto err;
216 }
217
218 if (!mei_hw_is_ready(dev)) {
219 dev_err(dev->dev, "ME is not ready.\n");
220 goto err;
221 }
222
223 if (!mei_hbm_version_is_supported(dev)) {
224 dev_dbg(dev->dev, "MEI start failed.\n");
225 goto err;
226 }
227
228 dev_dbg(dev->dev, "link layer has been established.\n");
229
230 mutex_unlock(&dev->device_lock);
231 return 0;
232err:
233 dev_err(dev->dev, "link layer initialization failed.\n");
234 mei_set_devstate(dev, MEI_DEV_DISABLED);
235 mutex_unlock(&dev->device_lock);
236 return -ENODEV;
237}
238EXPORT_SYMBOL_GPL(mei_start);
239
240/**
241 * mei_restart - restart device after suspend
242 *
243 * @dev: the device structure
244 *
245 * Return: 0 on success or -ENODEV if the restart hasn't succeeded
246 */
247int mei_restart(struct mei_device *dev)
248{
249 int err;
250
251 mutex_lock(&dev->device_lock);
252
253 mei_set_devstate(dev, MEI_DEV_POWER_UP);
254 dev->reset_count = 0;
255
256 err = mei_reset(dev);
257
258 mutex_unlock(&dev->device_lock);
259
260 if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
261 dev_err(dev->dev, "device disabled = %d\n", err);
262 return -ENODEV;
263 }
264
265 /* try to start again */
266 if (err)
267 schedule_work(&dev->reset_work);
268
269
270 return 0;
271}
272EXPORT_SYMBOL_GPL(mei_restart);
273
274static void mei_reset_work(struct work_struct *work)
275{
276 struct mei_device *dev =
277 container_of(work, struct mei_device, reset_work);
278 int ret;
279
280 mei_clear_interrupts(dev);
281 mei_synchronize_irq(dev);
282
283 mutex_lock(&dev->device_lock);
284
285 ret = mei_reset(dev);
286
287 mutex_unlock(&dev->device_lock);
288
289 if (dev->dev_state == MEI_DEV_DISABLED) {
290 dev_err(dev->dev, "device disabled = %d\n", ret);
291 return;
292 }
293
294 /* retry reset in case of failure */
295 if (ret)
296 schedule_work(&dev->reset_work);
297}
298
299void mei_stop(struct mei_device *dev)
300{
301 dev_dbg(dev->dev, "stopping the device.\n");
302
303 mutex_lock(&dev->device_lock);
304 mei_set_devstate(dev, MEI_DEV_POWER_DOWN);
305 mutex_unlock(&dev->device_lock);
306 mei_cl_bus_remove_devices(dev);
307
308 mei_cancel_work(dev);
309
310 mei_clear_interrupts(dev);
311 mei_synchronize_irq(dev);
312
313 mutex_lock(&dev->device_lock);
314
315 mei_reset(dev);
316 /* move device to disabled state unconditionally */
317 mei_set_devstate(dev, MEI_DEV_DISABLED);
318
319 mutex_unlock(&dev->device_lock);
320}
321EXPORT_SYMBOL_GPL(mei_stop);
322
323/**
324 * mei_write_is_idle - check if the write queues are idle
325 *
326 * @dev: the device structure
327 *
328 * Return: true of there is no pending write
329 */
330bool mei_write_is_idle(struct mei_device *dev)
331{
332 bool idle = (dev->dev_state == MEI_DEV_ENABLED &&
333 list_empty(&dev->ctrl_wr_list) &&
334 list_empty(&dev->write_list) &&
335 list_empty(&dev->write_waiting_list));
336
337 dev_dbg(dev->dev, "write pg: is idle[%d] state=%s ctrl=%01d write=%01d wwait=%01d\n",
338 idle,
339 mei_dev_state_str(dev->dev_state),
340 list_empty(&dev->ctrl_wr_list),
341 list_empty(&dev->write_list),
342 list_empty(&dev->write_waiting_list));
343
344 return idle;
345}
346EXPORT_SYMBOL_GPL(mei_write_is_idle);
347
348/**
349 * mei_device_init -- initialize mei_device structure
350 *
351 * @dev: the mei device
352 * @device: the device structure
353 * @hw_ops: hw operations
354 */
355void mei_device_init(struct mei_device *dev,
356 struct device *device,
357 const struct mei_hw_ops *hw_ops)
358{
359 /* setup our list array */
360 INIT_LIST_HEAD(&dev->file_list);
361 INIT_LIST_HEAD(&dev->device_list);
362 INIT_LIST_HEAD(&dev->me_clients);
363 mutex_init(&dev->device_lock);
364 init_rwsem(&dev->me_clients_rwsem);
365 mutex_init(&dev->cl_bus_lock);
366 init_waitqueue_head(&dev->wait_hw_ready);
367 init_waitqueue_head(&dev->wait_pg);
368 init_waitqueue_head(&dev->wait_hbm_start);
369 dev->dev_state = MEI_DEV_INITIALIZING;
370 dev->reset_count = 0;
371
372 INIT_LIST_HEAD(&dev->write_list);
373 INIT_LIST_HEAD(&dev->write_waiting_list);
374 INIT_LIST_HEAD(&dev->ctrl_wr_list);
375 INIT_LIST_HEAD(&dev->ctrl_rd_list);
376 dev->tx_queue_limit = MEI_TX_QUEUE_LIMIT_DEFAULT;
377
378 INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
379 INIT_WORK(&dev->reset_work, mei_reset_work);
380 INIT_WORK(&dev->bus_rescan_work, mei_cl_bus_rescan_work);
381
382 bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
383 dev->open_handle_count = 0;
384
385 /*
386 * Reserving the first client ID
387 * 0: Reserved for MEI Bus Message communications
388 */
389 bitmap_set(dev->host_clients_map, 0, 1);
390
391 dev->pg_event = MEI_PG_EVENT_IDLE;
392 dev->ops = hw_ops;
393 dev->dev = device;
394}
395EXPORT_SYMBOL_GPL(mei_device_init);
396