Linux Audio

Check our new training course

Loading...
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 *
  4 * h3xxx atmel micro companion support, notification LED subdevice
  5 *
  6 * Author : Linus Walleij <linus.walleij@linaro.org>
  7 */
  8
  9#include <linux/module.h>
 10#include <linux/platform_device.h>
 11#include <linux/mfd/ipaq-micro.h>
 12#include <linux/leds.h>
 13
 14#define LED_YELLOW	0x00
 15#define LED_GREEN	0x01
 16
 17#define LED_EN       (1 << 4) /* LED ON/OFF 0:off, 1:on                       */
 18#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */
 19#define LED_ALWAYS   (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask         */
 20
 21static int micro_leds_brightness_set(struct led_classdev *led_cdev,
 22				      enum led_brightness value)
 23{
 24	struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
 25	/*
 26	 * In this message:
 27	 * Byte 0 = LED color: 0 = yellow, 1 = green
 28	 *          yellow LED is always ~30 blinks per minute
 29	 * Byte 1 = duration (flags?) appears to be ignored
 30	 * Byte 2 = green ontime in 1/10 sec (deciseconds)
 31	 *          1 = 1/10 second
 32	 *          0 = 256/10 second
 33	 * Byte 3 = green offtime in 1/10 sec (deciseconds)
 34	 *          1 = 1/10 second
 35	 *          0 = 256/10 seconds
 36	 */
 37	struct ipaq_micro_msg msg = {
 38		.id = MSG_NOTIFY_LED,
 39		.tx_len = 4,
 40	};
 41
 42	msg.tx_data[0] = LED_GREEN;
 43	msg.tx_data[1] = 0;
 44	if (value) {
 45		msg.tx_data[2] = 0; /* Duty cycle 256 */
 46		msg.tx_data[3] = 1;
 47	} else {
 48		msg.tx_data[2] = 1;
 49		msg.tx_data[3] = 0; /* Duty cycle 256 */
 50	}
 51	return ipaq_micro_tx_msg_sync(micro, &msg);
 52}
 53
 54/* Maximum duty cycle in ms 256/10 sec = 25600 ms */
 55#define IPAQ_LED_MAX_DUTY 25600
 56
 57static int micro_leds_blink_set(struct led_classdev *led_cdev,
 58				unsigned long *delay_on,
 59				unsigned long *delay_off)
 60{
 61	struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
 62	/*
 63	 * In this message:
 64	 * Byte 0 = LED color: 0 = yellow, 1 = green
 65	 *          yellow LED is always ~30 blinks per minute
 66	 * Byte 1 = duration (flags?) appears to be ignored
 67	 * Byte 2 = green ontime in 1/10 sec (deciseconds)
 68	 *          1 = 1/10 second
 69	 *          0 = 256/10 second
 70	 * Byte 3 = green offtime in 1/10 sec (deciseconds)
 71	 *          1 = 1/10 second
 72	 *          0 = 256/10 seconds
 73	 */
 74	struct ipaq_micro_msg msg = {
 75		.id = MSG_NOTIFY_LED,
 76		.tx_len = 4,
 77	};
 78
 79	msg.tx_data[0] = LED_GREEN;
 80	if (*delay_on > IPAQ_LED_MAX_DUTY ||
 81	    *delay_off > IPAQ_LED_MAX_DUTY)
 82		return -EINVAL;
 83
 84	if (*delay_on == 0 && *delay_off == 0) {
 85		*delay_on = 100;
 86		*delay_off = 100;
 87	}
 88
 89	msg.tx_data[1] = 0;
 90	if (*delay_on >= IPAQ_LED_MAX_DUTY)
 91		msg.tx_data[2] = 0;
 92	else
 93		msg.tx_data[2] = (u8) DIV_ROUND_CLOSEST(*delay_on, 100);
 94	if (*delay_off >= IPAQ_LED_MAX_DUTY)
 95		msg.tx_data[3] = 0;
 96	else
 97		msg.tx_data[3] = (u8) DIV_ROUND_CLOSEST(*delay_off, 100);
 98	return ipaq_micro_tx_msg_sync(micro, &msg);
 99}
100
101static struct led_classdev micro_led = {
102	.name			= "led-ipaq-micro",
103	.brightness_set_blocking = micro_leds_brightness_set,
104	.blink_set		= micro_leds_blink_set,
105	.flags			= LED_CORE_SUSPENDRESUME,
106};
107
108static int micro_leds_probe(struct platform_device *pdev)
109{
110	int ret;
111
112	ret = devm_led_classdev_register(&pdev->dev, &micro_led);
113	if (ret) {
114		dev_err(&pdev->dev, "registering led failed: %d\n", ret);
115		return ret;
116	}
117	dev_info(&pdev->dev, "iPAQ micro notification LED driver\n");
118
119	return 0;
120}
121
122static struct platform_driver micro_leds_device_driver = {
123	.driver = {
124		.name    = "ipaq-micro-leds",
125	},
126	.probe   = micro_leds_probe,
127};
128module_platform_driver(micro_leds_device_driver);
129
130MODULE_LICENSE("GPL");
131MODULE_DESCRIPTION("driver for iPAQ Atmel micro leds");
132MODULE_ALIAS("platform:ipaq-micro-leds");
v5.14.15
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 *
  4 * h3xxx atmel micro companion support, notification LED subdevice
  5 *
  6 * Author : Linus Walleij <linus.walleij@linaro.org>
  7 */
  8
  9#include <linux/module.h>
 10#include <linux/platform_device.h>
 11#include <linux/mfd/ipaq-micro.h>
 12#include <linux/leds.h>
 13
 14#define LED_YELLOW	0x00
 15#define LED_GREEN	0x01
 16
 17#define LED_EN       (1 << 4) /* LED ON/OFF 0:off, 1:on                       */
 18#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */
 19#define LED_ALWAYS   (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask         */
 20
 21static int micro_leds_brightness_set(struct led_classdev *led_cdev,
 22				      enum led_brightness value)
 23{
 24	struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
 25	/*
 26	 * In this message:
 27	 * Byte 0 = LED color: 0 = yellow, 1 = green
 28	 *          yellow LED is always ~30 blinks per minute
 29	 * Byte 1 = duration (flags?) appears to be ignored
 30	 * Byte 2 = green ontime in 1/10 sec (deciseconds)
 31	 *          1 = 1/10 second
 32	 *          0 = 256/10 second
 33	 * Byte 3 = green offtime in 1/10 sec (deciseconds)
 34	 *          1 = 1/10 second
 35	 *          0 = 256/10 seconds
 36	 */
 37	struct ipaq_micro_msg msg = {
 38		.id = MSG_NOTIFY_LED,
 39		.tx_len = 4,
 40	};
 41
 42	msg.tx_data[0] = LED_GREEN;
 43	msg.tx_data[1] = 0;
 44	if (value) {
 45		msg.tx_data[2] = 0; /* Duty cycle 256 */
 46		msg.tx_data[3] = 1;
 47	} else {
 48		msg.tx_data[2] = 1;
 49		msg.tx_data[3] = 0; /* Duty cycle 256 */
 50	}
 51	return ipaq_micro_tx_msg_sync(micro, &msg);
 52}
 53
 54/* Maximum duty cycle in ms 256/10 sec = 25600 ms */
 55#define IPAQ_LED_MAX_DUTY 25600
 56
 57static int micro_leds_blink_set(struct led_classdev *led_cdev,
 58				unsigned long *delay_on,
 59				unsigned long *delay_off)
 60{
 61	struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
 62	/*
 63	 * In this message:
 64	 * Byte 0 = LED color: 0 = yellow, 1 = green
 65	 *          yellow LED is always ~30 blinks per minute
 66	 * Byte 1 = duration (flags?) appears to be ignored
 67	 * Byte 2 = green ontime in 1/10 sec (deciseconds)
 68	 *          1 = 1/10 second
 69	 *          0 = 256/10 second
 70	 * Byte 3 = green offtime in 1/10 sec (deciseconds)
 71	 *          1 = 1/10 second
 72	 *          0 = 256/10 seconds
 73	 */
 74	struct ipaq_micro_msg msg = {
 75		.id = MSG_NOTIFY_LED,
 76		.tx_len = 4,
 77	};
 78
 79	msg.tx_data[0] = LED_GREEN;
 80	if (*delay_on > IPAQ_LED_MAX_DUTY ||
 81	    *delay_off > IPAQ_LED_MAX_DUTY)
 82		return -EINVAL;
 83
 84	if (*delay_on == 0 && *delay_off == 0) {
 85		*delay_on = 100;
 86		*delay_off = 100;
 87	}
 88
 89	msg.tx_data[1] = 0;
 90	if (*delay_on >= IPAQ_LED_MAX_DUTY)
 91		msg.tx_data[2] = 0;
 92	else
 93		msg.tx_data[2] = (u8) DIV_ROUND_CLOSEST(*delay_on, 100);
 94	if (*delay_off >= IPAQ_LED_MAX_DUTY)
 95		msg.tx_data[3] = 0;
 96	else
 97		msg.tx_data[3] = (u8) DIV_ROUND_CLOSEST(*delay_off, 100);
 98	return ipaq_micro_tx_msg_sync(micro, &msg);
 99}
100
101static struct led_classdev micro_led = {
102	.name			= "led-ipaq-micro",
103	.brightness_set_blocking = micro_leds_brightness_set,
104	.blink_set		= micro_leds_blink_set,
105	.flags			= LED_CORE_SUSPENDRESUME,
106};
107
108static int micro_leds_probe(struct platform_device *pdev)
109{
110	int ret;
111
112	ret = devm_led_classdev_register(&pdev->dev, &micro_led);
113	if (ret) {
114		dev_err(&pdev->dev, "registering led failed: %d\n", ret);
115		return ret;
116	}
117	dev_info(&pdev->dev, "iPAQ micro notification LED driver\n");
118
119	return 0;
120}
121
122static struct platform_driver micro_leds_device_driver = {
123	.driver = {
124		.name    = "ipaq-micro-leds",
125	},
126	.probe   = micro_leds_probe,
127};
128module_platform_driver(micro_leds_device_driver);
129
130MODULE_LICENSE("GPL");
131MODULE_DESCRIPTION("driver for iPAQ Atmel micro leds");
132MODULE_ALIAS("platform:ipaq-micro-leds");