Loading...
1/*
2 * Copyright (c) 2006-2008 Intel Corporation
3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
4 * Copyright (c) 2008 Red Hat Inc.
5 *
6 * DRM core CRTC related functions
7 *
8 * Permission to use, copy, modify, distribute, and sell this software and its
9 * documentation for any purpose is hereby granted without fee, provided that
10 * the above copyright notice appear in all copies and that both that copyright
11 * notice and this permission notice appear in supporting documentation, and
12 * that the name of the copyright holders not be used in advertising or
13 * publicity pertaining to distribution of the software without specific,
14 * written prior permission. The copyright holders make no representations
15 * about the suitability of this software for any purpose. It is provided "as
16 * is" without express or implied warranty.
17 *
18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
24 * OF THIS SOFTWARE.
25 *
26 * Authors:
27 * Keith Packard
28 * Eric Anholt <eric@anholt.net>
29 * Dave Airlie <airlied@linux.ie>
30 * Jesse Barnes <jesse.barnes@intel.com>
31 */
32#include <linux/ctype.h>
33#include <linux/list.h>
34#include <linux/slab.h>
35#include <linux/export.h>
36#include <linux/dma-fence.h>
37#include <linux/uaccess.h>
38#include <drm/drm_blend.h>
39#include <drm/drm_crtc.h>
40#include <drm/drm_edid.h>
41#include <drm/drm_fourcc.h>
42#include <drm/drm_framebuffer.h>
43#include <drm/drm_managed.h>
44#include <drm/drm_modeset_lock.h>
45#include <drm/drm_atomic.h>
46#include <drm/drm_auth.h>
47#include <drm/drm_debugfs_crc.h>
48#include <drm/drm_drv.h>
49#include <drm/drm_print.h>
50#include <drm/drm_file.h>
51
52#include "drm_crtc_internal.h"
53#include "drm_internal.h"
54
55/**
56 * DOC: overview
57 *
58 * A CRTC represents the overall display pipeline. It receives pixel data from
59 * &drm_plane and blends them together. The &drm_display_mode is also attached
60 * to the CRTC, specifying display timings. On the output side the data is fed
61 * to one or more &drm_encoder, which are then each connected to one
62 * &drm_connector.
63 *
64 * To create a CRTC, a KMS driver allocates and zeroes an instance of
65 * &struct drm_crtc (possibly as part of a larger structure) and registers it
66 * with a call to drm_crtc_init_with_planes().
67 *
68 * The CRTC is also the entry point for legacy modeset operations (see
69 * &drm_crtc_funcs.set_config), legacy plane operations (see
70 * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2), and other legacy
71 * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
72 * features are controlled through &drm_property and
73 * &drm_mode_config_funcs.atomic_check.
74 */
75
76/**
77 * drm_crtc_from_index - find the registered CRTC at an index
78 * @dev: DRM device
79 * @idx: index of registered CRTC to find for
80 *
81 * Given a CRTC index, return the registered CRTC from DRM device's
82 * list of CRTCs with matching index. This is the inverse of drm_crtc_index().
83 * It's useful in the vblank callbacks (like &drm_driver.enable_vblank or
84 * &drm_driver.disable_vblank), since that still deals with indices instead
85 * of pointers to &struct drm_crtc."
86 */
87struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx)
88{
89 struct drm_crtc *crtc;
90
91 drm_for_each_crtc(crtc, dev)
92 if (idx == crtc->index)
93 return crtc;
94
95 return NULL;
96}
97EXPORT_SYMBOL(drm_crtc_from_index);
98
99int drm_crtc_force_disable(struct drm_crtc *crtc)
100{
101 struct drm_mode_set set = {
102 .crtc = crtc,
103 };
104
105 WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
106
107 return drm_mode_set_config_internal(&set);
108}
109
110int drm_crtc_register_all(struct drm_device *dev)
111{
112 struct drm_crtc *crtc;
113 int ret = 0;
114
115 drm_for_each_crtc(crtc, dev) {
116 drm_debugfs_crtc_add(crtc);
117
118 if (crtc->funcs->late_register)
119 ret = crtc->funcs->late_register(crtc);
120 if (ret)
121 return ret;
122 }
123
124 return 0;
125}
126
127void drm_crtc_unregister_all(struct drm_device *dev)
128{
129 struct drm_crtc *crtc;
130
131 drm_for_each_crtc(crtc, dev) {
132 if (crtc->funcs->early_unregister)
133 crtc->funcs->early_unregister(crtc);
134 drm_debugfs_crtc_remove(crtc);
135 }
136}
137
138static int drm_crtc_crc_init(struct drm_crtc *crtc)
139{
140#ifdef CONFIG_DEBUG_FS
141 spin_lock_init(&crtc->crc.lock);
142 init_waitqueue_head(&crtc->crc.wq);
143 crtc->crc.source = kstrdup("auto", GFP_KERNEL);
144 if (!crtc->crc.source)
145 return -ENOMEM;
146#endif
147 return 0;
148}
149
150static void drm_crtc_crc_fini(struct drm_crtc *crtc)
151{
152#ifdef CONFIG_DEBUG_FS
153 kfree(crtc->crc.source);
154#endif
155}
156
157static const struct dma_fence_ops drm_crtc_fence_ops;
158
159static struct drm_crtc *fence_to_crtc(struct dma_fence *fence)
160{
161 BUG_ON(fence->ops != &drm_crtc_fence_ops);
162 return container_of(fence->lock, struct drm_crtc, fence_lock);
163}
164
165static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence)
166{
167 struct drm_crtc *crtc = fence_to_crtc(fence);
168
169 return crtc->dev->driver->name;
170}
171
172static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence)
173{
174 struct drm_crtc *crtc = fence_to_crtc(fence);
175
176 return crtc->timeline_name;
177}
178
179static const struct dma_fence_ops drm_crtc_fence_ops = {
180 .get_driver_name = drm_crtc_fence_get_driver_name,
181 .get_timeline_name = drm_crtc_fence_get_timeline_name,
182};
183
184struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc)
185{
186 struct dma_fence *fence;
187
188 fence = kzalloc(sizeof(*fence), GFP_KERNEL);
189 if (!fence)
190 return NULL;
191
192 dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock,
193 crtc->fence_context, ++crtc->fence_seqno);
194
195 return fence;
196}
197
198/**
199 * DOC: standard CRTC properties
200 *
201 * DRM CRTCs have a few standardized properties:
202 *
203 * ACTIVE:
204 * Atomic property for setting the power state of the CRTC. When set to 1
205 * the CRTC will actively display content. When set to 0 the CRTC will be
206 * powered off. There is no expectation that user-space will reset CRTC
207 * resources like the mode and planes when setting ACTIVE to 0.
208 *
209 * User-space can rely on an ACTIVE change to 1 to never fail an atomic
210 * test as long as no other property has changed. If a change to ACTIVE
211 * fails an atomic test, this is a driver bug. For this reason setting
212 * ACTIVE to 0 must not release internal resources (like reserved memory
213 * bandwidth or clock generators).
214 *
215 * Note that the legacy DPMS property on connectors is internally routed
216 * to control this property for atomic drivers.
217 * MODE_ID:
218 * Atomic property for setting the CRTC display timings. The value is the
219 * ID of a blob containing the DRM mode info. To disable the CRTC,
220 * user-space must set this property to 0.
221 *
222 * Setting MODE_ID to 0 will release reserved resources for the CRTC.
223 * SCALING_FILTER:
224 * Atomic property for setting the scaling filter for CRTC scaler
225 *
226 * The value of this property can be one of the following:
227 *
228 * Default:
229 * Driver's default scaling filter
230 * Nearest Neighbor:
231 * Nearest Neighbor scaling filter
232 */
233
234__printf(6, 0)
235static int __drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
236 struct drm_plane *primary,
237 struct drm_plane *cursor,
238 const struct drm_crtc_funcs *funcs,
239 const char *name, va_list ap)
240{
241 struct drm_mode_config *config = &dev->mode_config;
242 int ret;
243
244 WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
245 WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
246
247 /* crtc index is used with 32bit bitmasks */
248 if (WARN_ON(config->num_crtc >= 32))
249 return -EINVAL;
250
251 WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
252 (!funcs->atomic_destroy_state ||
253 !funcs->atomic_duplicate_state));
254
255 crtc->dev = dev;
256 crtc->funcs = funcs;
257
258 INIT_LIST_HEAD(&crtc->commit_list);
259 spin_lock_init(&crtc->commit_lock);
260
261 drm_modeset_lock_init(&crtc->mutex);
262 ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
263 if (ret)
264 return ret;
265
266 if (name) {
267 crtc->name = kvasprintf(GFP_KERNEL, name, ap);
268 } else {
269 crtc->name = kasprintf(GFP_KERNEL, "crtc-%d", config->num_crtc);
270 }
271 if (!crtc->name) {
272 drm_mode_object_unregister(dev, &crtc->base);
273 return -ENOMEM;
274 }
275
276 crtc->fence_context = dma_fence_context_alloc(1);
277 spin_lock_init(&crtc->fence_lock);
278 snprintf(crtc->timeline_name, sizeof(crtc->timeline_name),
279 "CRTC:%d-%s", crtc->base.id, crtc->name);
280
281 crtc->base.properties = &crtc->properties;
282
283 list_add_tail(&crtc->head, &config->crtc_list);
284 crtc->index = config->num_crtc++;
285
286 crtc->primary = primary;
287 crtc->cursor = cursor;
288 if (primary && !primary->possible_crtcs)
289 primary->possible_crtcs = drm_crtc_mask(crtc);
290 if (cursor && !cursor->possible_crtcs)
291 cursor->possible_crtcs = drm_crtc_mask(crtc);
292
293 ret = drm_crtc_crc_init(crtc);
294 if (ret) {
295 drm_mode_object_unregister(dev, &crtc->base);
296 return ret;
297 }
298
299 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
300 drm_object_attach_property(&crtc->base, config->prop_active, 0);
301 drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
302 drm_object_attach_property(&crtc->base,
303 config->prop_out_fence_ptr, 0);
304 drm_object_attach_property(&crtc->base,
305 config->prop_vrr_enabled, 0);
306 }
307
308 return 0;
309}
310
311/**
312 * drm_crtc_init_with_planes - Initialise a new CRTC object with
313 * specified primary and cursor planes.
314 * @dev: DRM device
315 * @crtc: CRTC object to init
316 * @primary: Primary plane for CRTC
317 * @cursor: Cursor plane for CRTC
318 * @funcs: callbacks for the new CRTC
319 * @name: printf style format string for the CRTC name, or NULL for default name
320 *
321 * Inits a new object created as base part of a driver crtc object. Drivers
322 * should use this function instead of drm_crtc_init(), which is only provided
323 * for backwards compatibility with drivers which do not yet support universal
324 * planes). For really simple hardware which has only 1 plane look at
325 * drm_simple_display_pipe_init() instead.
326 * The &drm_crtc_funcs.destroy hook should call drm_crtc_cleanup() and kfree()
327 * the crtc structure. The crtc structure should not be allocated with
328 * devm_kzalloc().
329 *
330 * The @primary and @cursor planes are only relevant for legacy uAPI, see
331 * &drm_crtc.primary and &drm_crtc.cursor.
332 *
333 * Note: consider using drmm_crtc_alloc_with_planes() or
334 * drmm_crtc_init_with_planes() instead of drm_crtc_init_with_planes()
335 * to let the DRM managed resource infrastructure take care of cleanup
336 * and deallocation.
337 *
338 * Returns:
339 * Zero on success, error code on failure.
340 */
341int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
342 struct drm_plane *primary,
343 struct drm_plane *cursor,
344 const struct drm_crtc_funcs *funcs,
345 const char *name, ...)
346{
347 va_list ap;
348 int ret;
349
350 WARN_ON(!funcs->destroy);
351
352 va_start(ap, name);
353 ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
354 name, ap);
355 va_end(ap);
356
357 return ret;
358}
359EXPORT_SYMBOL(drm_crtc_init_with_planes);
360
361static void drmm_crtc_init_with_planes_cleanup(struct drm_device *dev,
362 void *ptr)
363{
364 struct drm_crtc *crtc = ptr;
365
366 drm_crtc_cleanup(crtc);
367}
368
369__printf(6, 0)
370static int __drmm_crtc_init_with_planes(struct drm_device *dev,
371 struct drm_crtc *crtc,
372 struct drm_plane *primary,
373 struct drm_plane *cursor,
374 const struct drm_crtc_funcs *funcs,
375 const char *name,
376 va_list args)
377{
378 int ret;
379
380 drm_WARN_ON(dev, funcs && funcs->destroy);
381
382 ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
383 name, args);
384 if (ret)
385 return ret;
386
387 ret = drmm_add_action_or_reset(dev, drmm_crtc_init_with_planes_cleanup,
388 crtc);
389 if (ret)
390 return ret;
391
392 return 0;
393}
394
395/**
396 * drmm_crtc_init_with_planes - Initialise a new CRTC object with
397 * specified primary and cursor planes.
398 * @dev: DRM device
399 * @crtc: CRTC object to init
400 * @primary: Primary plane for CRTC
401 * @cursor: Cursor plane for CRTC
402 * @funcs: callbacks for the new CRTC
403 * @name: printf style format string for the CRTC name, or NULL for default name
404 *
405 * Inits a new object created as base part of a driver crtc object. Drivers
406 * should use this function instead of drm_crtc_init(), which is only provided
407 * for backwards compatibility with drivers which do not yet support universal
408 * planes). For really simple hardware which has only 1 plane look at
409 * drm_simple_display_pipe_init() instead.
410 *
411 * Cleanup is automatically handled through registering
412 * drmm_crtc_cleanup() with drmm_add_action(). The crtc structure should
413 * be allocated with drmm_kzalloc().
414 *
415 * The @drm_crtc_funcs.destroy hook must be NULL.
416 *
417 * The @primary and @cursor planes are only relevant for legacy uAPI, see
418 * &drm_crtc.primary and &drm_crtc.cursor.
419 *
420 * Returns:
421 * Zero on success, error code on failure.
422 */
423int drmm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
424 struct drm_plane *primary,
425 struct drm_plane *cursor,
426 const struct drm_crtc_funcs *funcs,
427 const char *name, ...)
428{
429 va_list ap;
430 int ret;
431
432 va_start(ap, name);
433 ret = __drmm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
434 name, ap);
435 va_end(ap);
436 if (ret)
437 return ret;
438
439 return 0;
440}
441EXPORT_SYMBOL(drmm_crtc_init_with_planes);
442
443void *__drmm_crtc_alloc_with_planes(struct drm_device *dev,
444 size_t size, size_t offset,
445 struct drm_plane *primary,
446 struct drm_plane *cursor,
447 const struct drm_crtc_funcs *funcs,
448 const char *name, ...)
449{
450 void *container;
451 struct drm_crtc *crtc;
452 va_list ap;
453 int ret;
454
455 if (WARN_ON(!funcs || funcs->destroy))
456 return ERR_PTR(-EINVAL);
457
458 container = drmm_kzalloc(dev, size, GFP_KERNEL);
459 if (!container)
460 return ERR_PTR(-ENOMEM);
461
462 crtc = container + offset;
463
464 va_start(ap, name);
465 ret = __drmm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
466 name, ap);
467 va_end(ap);
468 if (ret)
469 return ERR_PTR(ret);
470
471 return container;
472}
473EXPORT_SYMBOL(__drmm_crtc_alloc_with_planes);
474
475/**
476 * drm_crtc_cleanup - Clean up the core crtc usage
477 * @crtc: CRTC to cleanup
478 *
479 * This function cleans up @crtc and removes it from the DRM mode setting
480 * core. Note that the function does *not* free the crtc structure itself,
481 * this is the responsibility of the caller.
482 */
483void drm_crtc_cleanup(struct drm_crtc *crtc)
484{
485 struct drm_device *dev = crtc->dev;
486
487 /* Note that the crtc_list is considered to be static; should we
488 * remove the drm_crtc at runtime we would have to decrement all
489 * the indices on the drm_crtc after us in the crtc_list.
490 */
491
492 drm_crtc_crc_fini(crtc);
493
494 kfree(crtc->gamma_store);
495 crtc->gamma_store = NULL;
496
497 drm_modeset_lock_fini(&crtc->mutex);
498
499 drm_mode_object_unregister(dev, &crtc->base);
500 list_del(&crtc->head);
501 dev->mode_config.num_crtc--;
502
503 WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
504 if (crtc->state && crtc->funcs->atomic_destroy_state)
505 crtc->funcs->atomic_destroy_state(crtc, crtc->state);
506
507 kfree(crtc->name);
508
509 memset(crtc, 0, sizeof(*crtc));
510}
511EXPORT_SYMBOL(drm_crtc_cleanup);
512
513/**
514 * drm_mode_getcrtc - get CRTC configuration
515 * @dev: drm device for the ioctl
516 * @data: data pointer for the ioctl
517 * @file_priv: drm file for the ioctl call
518 *
519 * Construct a CRTC configuration structure to return to the user.
520 *
521 * Called by the user via ioctl.
522 *
523 * Returns:
524 * Zero on success, negative errno on failure.
525 */
526int drm_mode_getcrtc(struct drm_device *dev,
527 void *data, struct drm_file *file_priv)
528{
529 struct drm_mode_crtc *crtc_resp = data;
530 struct drm_crtc *crtc;
531 struct drm_plane *plane;
532
533 if (!drm_core_check_feature(dev, DRIVER_MODESET))
534 return -EOPNOTSUPP;
535
536 crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id);
537 if (!crtc)
538 return -ENOENT;
539
540 plane = crtc->primary;
541
542 crtc_resp->gamma_size = crtc->gamma_size;
543
544 drm_modeset_lock(&plane->mutex, NULL);
545 if (plane->state && plane->state->fb)
546 crtc_resp->fb_id = plane->state->fb->base.id;
547 else if (!plane->state && plane->fb)
548 crtc_resp->fb_id = plane->fb->base.id;
549 else
550 crtc_resp->fb_id = 0;
551
552 if (plane->state) {
553 crtc_resp->x = plane->state->src_x >> 16;
554 crtc_resp->y = plane->state->src_y >> 16;
555 }
556 drm_modeset_unlock(&plane->mutex);
557
558 drm_modeset_lock(&crtc->mutex, NULL);
559 if (crtc->state) {
560 if (crtc->state->enable) {
561 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
562 crtc_resp->mode_valid = 1;
563 } else {
564 crtc_resp->mode_valid = 0;
565 }
566 } else {
567 crtc_resp->x = crtc->x;
568 crtc_resp->y = crtc->y;
569
570 if (crtc->enabled) {
571 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
572 crtc_resp->mode_valid = 1;
573
574 } else {
575 crtc_resp->mode_valid = 0;
576 }
577 }
578 if (!file_priv->aspect_ratio_allowed)
579 crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
580 drm_modeset_unlock(&crtc->mutex);
581
582 return 0;
583}
584
585static int __drm_mode_set_config_internal(struct drm_mode_set *set,
586 struct drm_modeset_acquire_ctx *ctx)
587{
588 struct drm_crtc *crtc = set->crtc;
589 struct drm_framebuffer *fb;
590 struct drm_crtc *tmp;
591 int ret;
592
593 WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
594
595 /*
596 * NOTE: ->set_config can also disable other crtcs (if we steal all
597 * connectors from it), hence we need to refcount the fbs across all
598 * crtcs. Atomic modeset will have saner semantics ...
599 */
600 drm_for_each_crtc(tmp, crtc->dev) {
601 struct drm_plane *plane = tmp->primary;
602
603 plane->old_fb = plane->fb;
604 }
605
606 fb = set->fb;
607
608 ret = crtc->funcs->set_config(set, ctx);
609 if (ret == 0) {
610 struct drm_plane *plane = crtc->primary;
611
612 plane->crtc = fb ? crtc : NULL;
613 plane->fb = fb;
614 }
615
616 drm_for_each_crtc(tmp, crtc->dev) {
617 struct drm_plane *plane = tmp->primary;
618
619 if (plane->fb)
620 drm_framebuffer_get(plane->fb);
621 if (plane->old_fb)
622 drm_framebuffer_put(plane->old_fb);
623 plane->old_fb = NULL;
624 }
625
626 return ret;
627}
628
629/**
630 * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
631 * @set: modeset config to set
632 *
633 * This is a little helper to wrap internal calls to the
634 * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
635 * correct refcounting dance.
636 *
637 * This should only be used by non-atomic legacy drivers.
638 *
639 * Returns:
640 * Zero on success, negative errno on failure.
641 */
642int drm_mode_set_config_internal(struct drm_mode_set *set)
643{
644 WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev));
645
646 return __drm_mode_set_config_internal(set, NULL);
647}
648EXPORT_SYMBOL(drm_mode_set_config_internal);
649
650/**
651 * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
652 * CRTC viewport
653 * @crtc: CRTC that framebuffer will be displayed on
654 * @x: x panning
655 * @y: y panning
656 * @mode: mode that framebuffer will be displayed under
657 * @fb: framebuffer to check size of
658 */
659int drm_crtc_check_viewport(const struct drm_crtc *crtc,
660 int x, int y,
661 const struct drm_display_mode *mode,
662 const struct drm_framebuffer *fb)
663
664{
665 int hdisplay, vdisplay;
666
667 drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
668
669 if (crtc->state &&
670 drm_rotation_90_or_270(crtc->primary->state->rotation))
671 swap(hdisplay, vdisplay);
672
673 return drm_framebuffer_check_src_coords(x << 16, y << 16,
674 hdisplay << 16, vdisplay << 16,
675 fb);
676}
677EXPORT_SYMBOL(drm_crtc_check_viewport);
678
679/**
680 * drm_mode_setcrtc - set CRTC configuration
681 * @dev: drm device for the ioctl
682 * @data: data pointer for the ioctl
683 * @file_priv: drm file for the ioctl call
684 *
685 * Build a new CRTC configuration based on user request.
686 *
687 * Called by the user via ioctl.
688 *
689 * Returns:
690 * Zero on success, negative errno on failure.
691 */
692int drm_mode_setcrtc(struct drm_device *dev, void *data,
693 struct drm_file *file_priv)
694{
695 struct drm_mode_config *config = &dev->mode_config;
696 struct drm_mode_crtc *crtc_req = data;
697 struct drm_crtc *crtc;
698 struct drm_plane *plane;
699 struct drm_connector **connector_set = NULL, *connector;
700 struct drm_framebuffer *fb = NULL;
701 struct drm_display_mode *mode = NULL;
702 struct drm_mode_set set;
703 uint32_t __user *set_connectors_ptr;
704 struct drm_modeset_acquire_ctx ctx;
705 int ret, i, num_connectors = 0;
706
707 if (!drm_core_check_feature(dev, DRIVER_MODESET))
708 return -EOPNOTSUPP;
709
710 /*
711 * Universal plane src offsets are only 16.16, prevent havoc for
712 * drivers using universal plane code internally.
713 */
714 if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
715 return -ERANGE;
716
717 crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id);
718 if (!crtc) {
719 drm_dbg_kms(dev, "Unknown CRTC ID %d\n", crtc_req->crtc_id);
720 return -ENOENT;
721 }
722 drm_dbg_kms(dev, "[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
723
724 plane = crtc->primary;
725
726 /* allow disabling with the primary plane leased */
727 if (crtc_req->mode_valid && !drm_lease_held(file_priv, plane->base.id))
728 return -EACCES;
729
730 DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx,
731 DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret);
732
733 if (crtc_req->mode_valid) {
734 /* If we have a mode we need a framebuffer. */
735 /* If we pass -1, set the mode with the currently bound fb */
736 if (crtc_req->fb_id == -1) {
737 struct drm_framebuffer *old_fb;
738
739 if (plane->state)
740 old_fb = plane->state->fb;
741 else
742 old_fb = plane->fb;
743
744 if (!old_fb) {
745 drm_dbg_kms(dev, "CRTC doesn't have current FB\n");
746 ret = -EINVAL;
747 goto out;
748 }
749
750 fb = old_fb;
751 /* Make refcounting symmetric with the lookup path. */
752 drm_framebuffer_get(fb);
753 } else {
754 fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);
755 if (!fb) {
756 drm_dbg_kms(dev, "Unknown FB ID%d\n",
757 crtc_req->fb_id);
758 ret = -ENOENT;
759 goto out;
760 }
761 }
762
763 mode = drm_mode_create(dev);
764 if (!mode) {
765 ret = -ENOMEM;
766 goto out;
767 }
768 if (!file_priv->aspect_ratio_allowed &&
769 (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {
770 drm_dbg_kms(dev, "Unexpected aspect-ratio flag bits\n");
771 ret = -EINVAL;
772 goto out;
773 }
774
775
776 ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
777 if (ret) {
778 drm_dbg_kms(dev, "Invalid mode (%s, %pe): " DRM_MODE_FMT "\n",
779 drm_get_mode_status_name(mode->status),
780 ERR_PTR(ret), DRM_MODE_ARG(mode));
781 goto out;
782 }
783
784 /*
785 * Check whether the primary plane supports the fb pixel format.
786 * Drivers not implementing the universal planes API use a
787 * default formats list provided by the DRM core which doesn't
788 * match real hardware capabilities. Skip the check in that
789 * case.
790 */
791 if (!plane->format_default) {
792 if (!drm_plane_has_format(plane, fb->format->format, fb->modifier)) {
793 drm_dbg_kms(dev, "Invalid pixel format %p4cc, modifier 0x%llx\n",
794 &fb->format->format, fb->modifier);
795 ret = -EINVAL;
796 goto out;
797 }
798 }
799
800 ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
801 mode, fb);
802 if (ret)
803 goto out;
804
805 }
806
807 if (crtc_req->count_connectors == 0 && mode) {
808 drm_dbg_kms(dev, "Count connectors is 0 but mode set\n");
809 ret = -EINVAL;
810 goto out;
811 }
812
813 if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
814 drm_dbg_kms(dev, "Count connectors is %d but no mode or fb set\n",
815 crtc_req->count_connectors);
816 ret = -EINVAL;
817 goto out;
818 }
819
820 if (crtc_req->count_connectors > 0) {
821 u32 out_id;
822
823 /* Avoid unbounded kernel memory allocation */
824 if (crtc_req->count_connectors > config->num_connector) {
825 ret = -EINVAL;
826 goto out;
827 }
828
829 connector_set = kmalloc_array(crtc_req->count_connectors,
830 sizeof(struct drm_connector *),
831 GFP_KERNEL);
832 if (!connector_set) {
833 ret = -ENOMEM;
834 goto out;
835 }
836
837 for (i = 0; i < crtc_req->count_connectors; i++) {
838 connector_set[i] = NULL;
839 set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
840 if (get_user(out_id, &set_connectors_ptr[i])) {
841 ret = -EFAULT;
842 goto out;
843 }
844
845 connector = drm_connector_lookup(dev, file_priv, out_id);
846 if (!connector) {
847 drm_dbg_kms(dev, "Connector id %d unknown\n",
848 out_id);
849 ret = -ENOENT;
850 goto out;
851 }
852 drm_dbg_kms(dev, "[CONNECTOR:%d:%s]\n",
853 connector->base.id, connector->name);
854
855 connector_set[i] = connector;
856 num_connectors++;
857 }
858 }
859
860 set.crtc = crtc;
861 set.x = crtc_req->x;
862 set.y = crtc_req->y;
863 set.mode = mode;
864 set.connectors = connector_set;
865 set.num_connectors = num_connectors;
866 set.fb = fb;
867
868 if (drm_drv_uses_atomic_modeset(dev))
869 ret = crtc->funcs->set_config(&set, &ctx);
870 else
871 ret = __drm_mode_set_config_internal(&set, &ctx);
872
873out:
874 if (fb)
875 drm_framebuffer_put(fb);
876
877 if (connector_set) {
878 for (i = 0; i < num_connectors; i++) {
879 if (connector_set[i])
880 drm_connector_put(connector_set[i]);
881 }
882 }
883 kfree(connector_set);
884 drm_mode_destroy(dev, mode);
885
886 /* In case we need to retry... */
887 connector_set = NULL;
888 fb = NULL;
889 mode = NULL;
890 num_connectors = 0;
891
892 DRM_MODESET_LOCK_ALL_END(dev, ctx, ret);
893
894 return ret;
895}
896
897int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
898 struct drm_property *property,
899 uint64_t value)
900{
901 int ret = -EINVAL;
902 struct drm_crtc *crtc = obj_to_crtc(obj);
903
904 if (crtc->funcs->set_property)
905 ret = crtc->funcs->set_property(crtc, property, value);
906 if (!ret)
907 drm_object_property_set_value(obj, property, value);
908
909 return ret;
910}
911
912/**
913 * drm_crtc_create_scaling_filter_property - create a new scaling filter
914 * property
915 *
916 * @crtc: drm CRTC
917 * @supported_filters: bitmask of supported scaling filters, must include
918 * BIT(DRM_SCALING_FILTER_DEFAULT).
919 *
920 * This function lets driver to enable the scaling filter property on a given
921 * CRTC.
922 *
923 * RETURNS:
924 * Zero for success or -errno
925 */
926int drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc,
927 unsigned int supported_filters)
928{
929 struct drm_property *prop =
930 drm_create_scaling_filter_prop(crtc->dev, supported_filters);
931
932 if (IS_ERR(prop))
933 return PTR_ERR(prop);
934
935 drm_object_attach_property(&crtc->base, prop,
936 DRM_SCALING_FILTER_DEFAULT);
937 crtc->scaling_filter_property = prop;
938
939 return 0;
940}
941EXPORT_SYMBOL(drm_crtc_create_scaling_filter_property);
1/*
2 * Copyright (c) 2006-2008 Intel Corporation
3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
4 * Copyright (c) 2008 Red Hat Inc.
5 *
6 * DRM core CRTC related functions
7 *
8 * Permission to use, copy, modify, distribute, and sell this software and its
9 * documentation for any purpose is hereby granted without fee, provided that
10 * the above copyright notice appear in all copies and that both that copyright
11 * notice and this permission notice appear in supporting documentation, and
12 * that the name of the copyright holders not be used in advertising or
13 * publicity pertaining to distribution of the software without specific,
14 * written prior permission. The copyright holders make no representations
15 * about the suitability of this software for any purpose. It is provided "as
16 * is" without express or implied warranty.
17 *
18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
24 * OF THIS SOFTWARE.
25 *
26 * Authors:
27 * Keith Packard
28 * Eric Anholt <eric@anholt.net>
29 * Dave Airlie <airlied@linux.ie>
30 * Jesse Barnes <jesse.barnes@intel.com>
31 */
32#include <linux/ctype.h>
33#include <linux/list.h>
34#include <linux/slab.h>
35#include <linux/export.h>
36#include <linux/dma-fence.h>
37#include <linux/uaccess.h>
38#include <drm/drm_crtc.h>
39#include <drm/drm_edid.h>
40#include <drm/drm_fourcc.h>
41#include <drm/drm_managed.h>
42#include <drm/drm_modeset_lock.h>
43#include <drm/drm_atomic.h>
44#include <drm/drm_auth.h>
45#include <drm/drm_debugfs_crc.h>
46#include <drm/drm_drv.h>
47#include <drm/drm_print.h>
48#include <drm/drm_file.h>
49
50#include "drm_crtc_internal.h"
51#include "drm_internal.h"
52
53/**
54 * DOC: overview
55 *
56 * A CRTC represents the overall display pipeline. It receives pixel data from
57 * &drm_plane and blends them together. The &drm_display_mode is also attached
58 * to the CRTC, specifying display timings. On the output side the data is fed
59 * to one or more &drm_encoder, which are then each connected to one
60 * &drm_connector.
61 *
62 * To create a CRTC, a KMS drivers allocates and zeroes an instances of
63 * &struct drm_crtc (possibly as part of a larger structure) and registers it
64 * with a call to drm_crtc_init_with_planes().
65 *
66 * The CRTC is also the entry point for legacy modeset operations, see
67 * &drm_crtc_funcs.set_config, legacy plane operations, see
68 * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy
69 * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
70 * features are controlled through &drm_property and
71 * &drm_mode_config_funcs.atomic_check.
72 */
73
74/**
75 * drm_crtc_from_index - find the registered CRTC at an index
76 * @dev: DRM device
77 * @idx: index of registered CRTC to find for
78 *
79 * Given a CRTC index, return the registered CRTC from DRM device's
80 * list of CRTCs with matching index. This is the inverse of drm_crtc_index().
81 * It's useful in the vblank callbacks (like &drm_driver.enable_vblank or
82 * &drm_driver.disable_vblank), since that still deals with indices instead
83 * of pointers to &struct drm_crtc."
84 */
85struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx)
86{
87 struct drm_crtc *crtc;
88
89 drm_for_each_crtc(crtc, dev)
90 if (idx == crtc->index)
91 return crtc;
92
93 return NULL;
94}
95EXPORT_SYMBOL(drm_crtc_from_index);
96
97int drm_crtc_force_disable(struct drm_crtc *crtc)
98{
99 struct drm_mode_set set = {
100 .crtc = crtc,
101 };
102
103 WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
104
105 return drm_mode_set_config_internal(&set);
106}
107
108static unsigned int drm_num_crtcs(struct drm_device *dev)
109{
110 unsigned int num = 0;
111 struct drm_crtc *tmp;
112
113 drm_for_each_crtc(tmp, dev) {
114 num++;
115 }
116
117 return num;
118}
119
120int drm_crtc_register_all(struct drm_device *dev)
121{
122 struct drm_crtc *crtc;
123 int ret = 0;
124
125 drm_for_each_crtc(crtc, dev) {
126 drm_debugfs_crtc_add(crtc);
127
128 if (crtc->funcs->late_register)
129 ret = crtc->funcs->late_register(crtc);
130 if (ret)
131 return ret;
132 }
133
134 return 0;
135}
136
137void drm_crtc_unregister_all(struct drm_device *dev)
138{
139 struct drm_crtc *crtc;
140
141 drm_for_each_crtc(crtc, dev) {
142 if (crtc->funcs->early_unregister)
143 crtc->funcs->early_unregister(crtc);
144 drm_debugfs_crtc_remove(crtc);
145 }
146}
147
148static int drm_crtc_crc_init(struct drm_crtc *crtc)
149{
150#ifdef CONFIG_DEBUG_FS
151 spin_lock_init(&crtc->crc.lock);
152 init_waitqueue_head(&crtc->crc.wq);
153 crtc->crc.source = kstrdup("auto", GFP_KERNEL);
154 if (!crtc->crc.source)
155 return -ENOMEM;
156#endif
157 return 0;
158}
159
160static void drm_crtc_crc_fini(struct drm_crtc *crtc)
161{
162#ifdef CONFIG_DEBUG_FS
163 kfree(crtc->crc.source);
164#endif
165}
166
167static const struct dma_fence_ops drm_crtc_fence_ops;
168
169static struct drm_crtc *fence_to_crtc(struct dma_fence *fence)
170{
171 BUG_ON(fence->ops != &drm_crtc_fence_ops);
172 return container_of(fence->lock, struct drm_crtc, fence_lock);
173}
174
175static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence)
176{
177 struct drm_crtc *crtc = fence_to_crtc(fence);
178
179 return crtc->dev->driver->name;
180}
181
182static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence)
183{
184 struct drm_crtc *crtc = fence_to_crtc(fence);
185
186 return crtc->timeline_name;
187}
188
189static const struct dma_fence_ops drm_crtc_fence_ops = {
190 .get_driver_name = drm_crtc_fence_get_driver_name,
191 .get_timeline_name = drm_crtc_fence_get_timeline_name,
192};
193
194struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc)
195{
196 struct dma_fence *fence;
197
198 fence = kzalloc(sizeof(*fence), GFP_KERNEL);
199 if (!fence)
200 return NULL;
201
202 dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock,
203 crtc->fence_context, ++crtc->fence_seqno);
204
205 return fence;
206}
207
208/**
209 * DOC: standard CRTC properties
210 *
211 * DRM CRTCs have a few standardized properties:
212 *
213 * ACTIVE:
214 * Atomic property for setting the power state of the CRTC. When set to 1
215 * the CRTC will actively display content. When set to 0 the CRTC will be
216 * powered off. There is no expectation that user-space will reset CRTC
217 * resources like the mode and planes when setting ACTIVE to 0.
218 *
219 * User-space can rely on an ACTIVE change to 1 to never fail an atomic
220 * test as long as no other property has changed. If a change to ACTIVE
221 * fails an atomic test, this is a driver bug. For this reason setting
222 * ACTIVE to 0 must not release internal resources (like reserved memory
223 * bandwidth or clock generators).
224 *
225 * Note that the legacy DPMS property on connectors is internally routed
226 * to control this property for atomic drivers.
227 * MODE_ID:
228 * Atomic property for setting the CRTC display timings. The value is the
229 * ID of a blob containing the DRM mode info. To disable the CRTC,
230 * user-space must set this property to 0.
231 *
232 * Setting MODE_ID to 0 will release reserved resources for the CRTC.
233 * SCALING_FILTER:
234 * Atomic property for setting the scaling filter for CRTC scaler
235 *
236 * The value of this property can be one of the following:
237 *
238 * Default:
239 * Driver's default scaling filter
240 * Nearest Neighbor:
241 * Nearest Neighbor scaling filter
242 */
243
244__printf(6, 0)
245static int __drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
246 struct drm_plane *primary,
247 struct drm_plane *cursor,
248 const struct drm_crtc_funcs *funcs,
249 const char *name, va_list ap)
250{
251 struct drm_mode_config *config = &dev->mode_config;
252 int ret;
253
254 WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
255 WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
256
257 /* crtc index is used with 32bit bitmasks */
258 if (WARN_ON(config->num_crtc >= 32))
259 return -EINVAL;
260
261 WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
262 (!funcs->atomic_destroy_state ||
263 !funcs->atomic_duplicate_state));
264
265 crtc->dev = dev;
266 crtc->funcs = funcs;
267
268 INIT_LIST_HEAD(&crtc->commit_list);
269 spin_lock_init(&crtc->commit_lock);
270
271 drm_modeset_lock_init(&crtc->mutex);
272 ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
273 if (ret)
274 return ret;
275
276 if (name) {
277 crtc->name = kvasprintf(GFP_KERNEL, name, ap);
278 } else {
279 crtc->name = kasprintf(GFP_KERNEL, "crtc-%d",
280 drm_num_crtcs(dev));
281 }
282 if (!crtc->name) {
283 drm_mode_object_unregister(dev, &crtc->base);
284 return -ENOMEM;
285 }
286
287 crtc->fence_context = dma_fence_context_alloc(1);
288 spin_lock_init(&crtc->fence_lock);
289 snprintf(crtc->timeline_name, sizeof(crtc->timeline_name),
290 "CRTC:%d-%s", crtc->base.id, crtc->name);
291
292 crtc->base.properties = &crtc->properties;
293
294 list_add_tail(&crtc->head, &config->crtc_list);
295 crtc->index = config->num_crtc++;
296
297 crtc->primary = primary;
298 crtc->cursor = cursor;
299 if (primary && !primary->possible_crtcs)
300 primary->possible_crtcs = drm_crtc_mask(crtc);
301 if (cursor && !cursor->possible_crtcs)
302 cursor->possible_crtcs = drm_crtc_mask(crtc);
303
304 ret = drm_crtc_crc_init(crtc);
305 if (ret) {
306 drm_mode_object_unregister(dev, &crtc->base);
307 return ret;
308 }
309
310 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
311 drm_object_attach_property(&crtc->base, config->prop_active, 0);
312 drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
313 drm_object_attach_property(&crtc->base,
314 config->prop_out_fence_ptr, 0);
315 drm_object_attach_property(&crtc->base,
316 config->prop_vrr_enabled, 0);
317 }
318
319 return 0;
320}
321
322/**
323 * drm_crtc_init_with_planes - Initialise a new CRTC object with
324 * specified primary and cursor planes.
325 * @dev: DRM device
326 * @crtc: CRTC object to init
327 * @primary: Primary plane for CRTC
328 * @cursor: Cursor plane for CRTC
329 * @funcs: callbacks for the new CRTC
330 * @name: printf style format string for the CRTC name, or NULL for default name
331 *
332 * Inits a new object created as base part of a driver crtc object. Drivers
333 * should use this function instead of drm_crtc_init(), which is only provided
334 * for backwards compatibility with drivers which do not yet support universal
335 * planes). For really simple hardware which has only 1 plane look at
336 * drm_simple_display_pipe_init() instead.
337 * The &drm_crtc_funcs.destroy hook should call drm_crtc_cleanup() and kfree()
338 * the crtc structure. The crtc structure should not be allocated with
339 * devm_kzalloc().
340 *
341 * The @primary and @cursor planes are only relevant for legacy uAPI, see
342 * &drm_crtc.primary and &drm_crtc.cursor.
343 *
344 * Note: consider using drmm_crtc_alloc_with_planes() instead of
345 * drm_crtc_init_with_planes() to let the DRM managed resource infrastructure
346 * take care of cleanup and deallocation.
347 *
348 * Returns:
349 * Zero on success, error code on failure.
350 */
351int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
352 struct drm_plane *primary,
353 struct drm_plane *cursor,
354 const struct drm_crtc_funcs *funcs,
355 const char *name, ...)
356{
357 va_list ap;
358 int ret;
359
360 WARN_ON(!funcs->destroy);
361
362 va_start(ap, name);
363 ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
364 name, ap);
365 va_end(ap);
366
367 return ret;
368}
369EXPORT_SYMBOL(drm_crtc_init_with_planes);
370
371static void drmm_crtc_alloc_with_planes_cleanup(struct drm_device *dev,
372 void *ptr)
373{
374 struct drm_crtc *crtc = ptr;
375
376 drm_crtc_cleanup(crtc);
377}
378
379void *__drmm_crtc_alloc_with_planes(struct drm_device *dev,
380 size_t size, size_t offset,
381 struct drm_plane *primary,
382 struct drm_plane *cursor,
383 const struct drm_crtc_funcs *funcs,
384 const char *name, ...)
385{
386 void *container;
387 struct drm_crtc *crtc;
388 va_list ap;
389 int ret;
390
391 if (WARN_ON(!funcs || funcs->destroy))
392 return ERR_PTR(-EINVAL);
393
394 container = drmm_kzalloc(dev, size, GFP_KERNEL);
395 if (!container)
396 return ERR_PTR(-ENOMEM);
397
398 crtc = container + offset;
399
400 va_start(ap, name);
401 ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
402 name, ap);
403 va_end(ap);
404 if (ret)
405 return ERR_PTR(ret);
406
407 ret = drmm_add_action_or_reset(dev, drmm_crtc_alloc_with_planes_cleanup,
408 crtc);
409 if (ret)
410 return ERR_PTR(ret);
411
412 return container;
413}
414EXPORT_SYMBOL(__drmm_crtc_alloc_with_planes);
415
416/**
417 * drm_crtc_cleanup - Clean up the core crtc usage
418 * @crtc: CRTC to cleanup
419 *
420 * This function cleans up @crtc and removes it from the DRM mode setting
421 * core. Note that the function does *not* free the crtc structure itself,
422 * this is the responsibility of the caller.
423 */
424void drm_crtc_cleanup(struct drm_crtc *crtc)
425{
426 struct drm_device *dev = crtc->dev;
427
428 /* Note that the crtc_list is considered to be static; should we
429 * remove the drm_crtc at runtime we would have to decrement all
430 * the indices on the drm_crtc after us in the crtc_list.
431 */
432
433 drm_crtc_crc_fini(crtc);
434
435 kfree(crtc->gamma_store);
436 crtc->gamma_store = NULL;
437
438 drm_modeset_lock_fini(&crtc->mutex);
439
440 drm_mode_object_unregister(dev, &crtc->base);
441 list_del(&crtc->head);
442 dev->mode_config.num_crtc--;
443
444 WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
445 if (crtc->state && crtc->funcs->atomic_destroy_state)
446 crtc->funcs->atomic_destroy_state(crtc, crtc->state);
447
448 kfree(crtc->name);
449
450 memset(crtc, 0, sizeof(*crtc));
451}
452EXPORT_SYMBOL(drm_crtc_cleanup);
453
454/**
455 * drm_mode_getcrtc - get CRTC configuration
456 * @dev: drm device for the ioctl
457 * @data: data pointer for the ioctl
458 * @file_priv: drm file for the ioctl call
459 *
460 * Construct a CRTC configuration structure to return to the user.
461 *
462 * Called by the user via ioctl.
463 *
464 * Returns:
465 * Zero on success, negative errno on failure.
466 */
467int drm_mode_getcrtc(struct drm_device *dev,
468 void *data, struct drm_file *file_priv)
469{
470 struct drm_mode_crtc *crtc_resp = data;
471 struct drm_crtc *crtc;
472 struct drm_plane *plane;
473
474 if (!drm_core_check_feature(dev, DRIVER_MODESET))
475 return -EOPNOTSUPP;
476
477 crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id);
478 if (!crtc)
479 return -ENOENT;
480
481 plane = crtc->primary;
482
483 crtc_resp->gamma_size = crtc->gamma_size;
484
485 drm_modeset_lock(&plane->mutex, NULL);
486 if (plane->state && plane->state->fb)
487 crtc_resp->fb_id = plane->state->fb->base.id;
488 else if (!plane->state && plane->fb)
489 crtc_resp->fb_id = plane->fb->base.id;
490 else
491 crtc_resp->fb_id = 0;
492
493 if (plane->state) {
494 crtc_resp->x = plane->state->src_x >> 16;
495 crtc_resp->y = plane->state->src_y >> 16;
496 }
497 drm_modeset_unlock(&plane->mutex);
498
499 drm_modeset_lock(&crtc->mutex, NULL);
500 if (crtc->state) {
501 if (crtc->state->enable) {
502 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
503 crtc_resp->mode_valid = 1;
504 } else {
505 crtc_resp->mode_valid = 0;
506 }
507 } else {
508 crtc_resp->x = crtc->x;
509 crtc_resp->y = crtc->y;
510
511 if (crtc->enabled) {
512 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
513 crtc_resp->mode_valid = 1;
514
515 } else {
516 crtc_resp->mode_valid = 0;
517 }
518 }
519 if (!file_priv->aspect_ratio_allowed)
520 crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
521 drm_modeset_unlock(&crtc->mutex);
522
523 return 0;
524}
525
526static int __drm_mode_set_config_internal(struct drm_mode_set *set,
527 struct drm_modeset_acquire_ctx *ctx)
528{
529 struct drm_crtc *crtc = set->crtc;
530 struct drm_framebuffer *fb;
531 struct drm_crtc *tmp;
532 int ret;
533
534 WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
535
536 /*
537 * NOTE: ->set_config can also disable other crtcs (if we steal all
538 * connectors from it), hence we need to refcount the fbs across all
539 * crtcs. Atomic modeset will have saner semantics ...
540 */
541 drm_for_each_crtc(tmp, crtc->dev) {
542 struct drm_plane *plane = tmp->primary;
543
544 plane->old_fb = plane->fb;
545 }
546
547 fb = set->fb;
548
549 ret = crtc->funcs->set_config(set, ctx);
550 if (ret == 0) {
551 struct drm_plane *plane = crtc->primary;
552
553 plane->crtc = fb ? crtc : NULL;
554 plane->fb = fb;
555 }
556
557 drm_for_each_crtc(tmp, crtc->dev) {
558 struct drm_plane *plane = tmp->primary;
559
560 if (plane->fb)
561 drm_framebuffer_get(plane->fb);
562 if (plane->old_fb)
563 drm_framebuffer_put(plane->old_fb);
564 plane->old_fb = NULL;
565 }
566
567 return ret;
568}
569
570/**
571 * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
572 * @set: modeset config to set
573 *
574 * This is a little helper to wrap internal calls to the
575 * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
576 * correct refcounting dance.
577 *
578 * This should only be used by non-atomic legacy drivers.
579 *
580 * Returns:
581 * Zero on success, negative errno on failure.
582 */
583int drm_mode_set_config_internal(struct drm_mode_set *set)
584{
585 WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev));
586
587 return __drm_mode_set_config_internal(set, NULL);
588}
589EXPORT_SYMBOL(drm_mode_set_config_internal);
590
591/**
592 * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
593 * CRTC viewport
594 * @crtc: CRTC that framebuffer will be displayed on
595 * @x: x panning
596 * @y: y panning
597 * @mode: mode that framebuffer will be displayed under
598 * @fb: framebuffer to check size of
599 */
600int drm_crtc_check_viewport(const struct drm_crtc *crtc,
601 int x, int y,
602 const struct drm_display_mode *mode,
603 const struct drm_framebuffer *fb)
604
605{
606 int hdisplay, vdisplay;
607
608 drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
609
610 if (crtc->state &&
611 drm_rotation_90_or_270(crtc->primary->state->rotation))
612 swap(hdisplay, vdisplay);
613
614 return drm_framebuffer_check_src_coords(x << 16, y << 16,
615 hdisplay << 16, vdisplay << 16,
616 fb);
617}
618EXPORT_SYMBOL(drm_crtc_check_viewport);
619
620/**
621 * drm_mode_setcrtc - set CRTC configuration
622 * @dev: drm device for the ioctl
623 * @data: data pointer for the ioctl
624 * @file_priv: drm file for the ioctl call
625 *
626 * Build a new CRTC configuration based on user request.
627 *
628 * Called by the user via ioctl.
629 *
630 * Returns:
631 * Zero on success, negative errno on failure.
632 */
633int drm_mode_setcrtc(struct drm_device *dev, void *data,
634 struct drm_file *file_priv)
635{
636 struct drm_mode_config *config = &dev->mode_config;
637 struct drm_mode_crtc *crtc_req = data;
638 struct drm_crtc *crtc;
639 struct drm_plane *plane;
640 struct drm_connector **connector_set = NULL, *connector;
641 struct drm_framebuffer *fb = NULL;
642 struct drm_display_mode *mode = NULL;
643 struct drm_mode_set set;
644 uint32_t __user *set_connectors_ptr;
645 struct drm_modeset_acquire_ctx ctx;
646 int ret;
647 int i;
648
649 if (!drm_core_check_feature(dev, DRIVER_MODESET))
650 return -EOPNOTSUPP;
651
652 /*
653 * Universal plane src offsets are only 16.16, prevent havoc for
654 * drivers using universal plane code internally.
655 */
656 if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
657 return -ERANGE;
658
659 crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id);
660 if (!crtc) {
661 DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
662 return -ENOENT;
663 }
664 DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
665
666 plane = crtc->primary;
667
668 /* allow disabling with the primary plane leased */
669 if (crtc_req->mode_valid && !drm_lease_held(file_priv, plane->base.id))
670 return -EACCES;
671
672 DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx,
673 DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret);
674
675 if (crtc_req->mode_valid) {
676 /* If we have a mode we need a framebuffer. */
677 /* If we pass -1, set the mode with the currently bound fb */
678 if (crtc_req->fb_id == -1) {
679 struct drm_framebuffer *old_fb;
680
681 if (plane->state)
682 old_fb = plane->state->fb;
683 else
684 old_fb = plane->fb;
685
686 if (!old_fb) {
687 DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
688 ret = -EINVAL;
689 goto out;
690 }
691
692 fb = old_fb;
693 /* Make refcounting symmetric with the lookup path. */
694 drm_framebuffer_get(fb);
695 } else {
696 fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);
697 if (!fb) {
698 DRM_DEBUG_KMS("Unknown FB ID%d\n",
699 crtc_req->fb_id);
700 ret = -ENOENT;
701 goto out;
702 }
703 }
704
705 mode = drm_mode_create(dev);
706 if (!mode) {
707 ret = -ENOMEM;
708 goto out;
709 }
710 if (!file_priv->aspect_ratio_allowed &&
711 (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {
712 DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
713 ret = -EINVAL;
714 goto out;
715 }
716
717
718 ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
719 if (ret) {
720 DRM_DEBUG_KMS("Invalid mode (ret=%d, status=%s)\n",
721 ret, drm_get_mode_status_name(mode->status));
722 drm_mode_debug_printmodeline(mode);
723 goto out;
724 }
725
726 /*
727 * Check whether the primary plane supports the fb pixel format.
728 * Drivers not implementing the universal planes API use a
729 * default formats list provided by the DRM core which doesn't
730 * match real hardware capabilities. Skip the check in that
731 * case.
732 */
733 if (!plane->format_default) {
734 ret = drm_plane_check_pixel_format(plane,
735 fb->format->format,
736 fb->modifier);
737 if (ret) {
738 DRM_DEBUG_KMS("Invalid pixel format %p4cc, modifier 0x%llx\n",
739 &fb->format->format,
740 fb->modifier);
741 goto out;
742 }
743 }
744
745 ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
746 mode, fb);
747 if (ret)
748 goto out;
749
750 }
751
752 if (crtc_req->count_connectors == 0 && mode) {
753 DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
754 ret = -EINVAL;
755 goto out;
756 }
757
758 if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
759 DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
760 crtc_req->count_connectors);
761 ret = -EINVAL;
762 goto out;
763 }
764
765 if (crtc_req->count_connectors > 0) {
766 u32 out_id;
767
768 /* Avoid unbounded kernel memory allocation */
769 if (crtc_req->count_connectors > config->num_connector) {
770 ret = -EINVAL;
771 goto out;
772 }
773
774 connector_set = kmalloc_array(crtc_req->count_connectors,
775 sizeof(struct drm_connector *),
776 GFP_KERNEL);
777 if (!connector_set) {
778 ret = -ENOMEM;
779 goto out;
780 }
781
782 for (i = 0; i < crtc_req->count_connectors; i++) {
783 connector_set[i] = NULL;
784 set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
785 if (get_user(out_id, &set_connectors_ptr[i])) {
786 ret = -EFAULT;
787 goto out;
788 }
789
790 connector = drm_connector_lookup(dev, file_priv, out_id);
791 if (!connector) {
792 DRM_DEBUG_KMS("Connector id %d unknown\n",
793 out_id);
794 ret = -ENOENT;
795 goto out;
796 }
797 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
798 connector->base.id,
799 connector->name);
800
801 connector_set[i] = connector;
802 }
803 }
804
805 set.crtc = crtc;
806 set.x = crtc_req->x;
807 set.y = crtc_req->y;
808 set.mode = mode;
809 set.connectors = connector_set;
810 set.num_connectors = crtc_req->count_connectors;
811 set.fb = fb;
812
813 if (drm_drv_uses_atomic_modeset(dev))
814 ret = crtc->funcs->set_config(&set, &ctx);
815 else
816 ret = __drm_mode_set_config_internal(&set, &ctx);
817
818out:
819 if (fb)
820 drm_framebuffer_put(fb);
821
822 if (connector_set) {
823 for (i = 0; i < crtc_req->count_connectors; i++) {
824 if (connector_set[i])
825 drm_connector_put(connector_set[i]);
826 }
827 }
828 kfree(connector_set);
829 drm_mode_destroy(dev, mode);
830
831 /* In case we need to retry... */
832 connector_set = NULL;
833 fb = NULL;
834 mode = NULL;
835
836 DRM_MODESET_LOCK_ALL_END(dev, ctx, ret);
837
838 return ret;
839}
840
841int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
842 struct drm_property *property,
843 uint64_t value)
844{
845 int ret = -EINVAL;
846 struct drm_crtc *crtc = obj_to_crtc(obj);
847
848 if (crtc->funcs->set_property)
849 ret = crtc->funcs->set_property(crtc, property, value);
850 if (!ret)
851 drm_object_property_set_value(obj, property, value);
852
853 return ret;
854}
855
856/**
857 * drm_crtc_create_scaling_filter_property - create a new scaling filter
858 * property
859 *
860 * @crtc: drm CRTC
861 * @supported_filters: bitmask of supported scaling filters, must include
862 * BIT(DRM_SCALING_FILTER_DEFAULT).
863 *
864 * This function lets driver to enable the scaling filter property on a given
865 * CRTC.
866 *
867 * RETURNS:
868 * Zero for success or -errno
869 */
870int drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc,
871 unsigned int supported_filters)
872{
873 struct drm_property *prop =
874 drm_create_scaling_filter_prop(crtc->dev, supported_filters);
875
876 if (IS_ERR(prop))
877 return PTR_ERR(prop);
878
879 drm_object_attach_property(&crtc->base, prop,
880 DRM_SCALING_FILTER_DEFAULT);
881 crtc->scaling_filter_property = prop;
882
883 return 0;
884}
885EXPORT_SYMBOL(drm_crtc_create_scaling_filter_property);