Linux Audio

Check our new training course

Yocto distribution development and maintenance

Need a Yocto distribution for your embedded project?
Loading...
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * dts file for lg1312 SoC
  4 *
  5 * Copyright (C) 2016, LG Electronics
  6 */
  7
  8#include <dt-bindings/gpio/gpio.h>
  9#include <dt-bindings/interrupt-controller/arm-gic.h>
 10
 11/ {
 12	#address-cells = <2>;
 13	#size-cells = <2>;
 14
 15	compatible = "lge,lg1312";
 16	interrupt-parent = <&gic>;
 17
 18	cpus {
 19		#address-cells = <2>;
 20		#size-cells = <0>;
 21
 22		cpu0: cpu@0 {
 23			device_type = "cpu";
 24			compatible = "arm,cortex-a53";
 25			reg = <0x0 0x0>;
 26			next-level-cache = <&L2_0>;
 27		};
 28		cpu1: cpu@1 {
 29			device_type = "cpu";
 30			compatible = "arm,cortex-a53";
 31			reg = <0x0 0x1>;
 32			enable-method = "psci";
 33			next-level-cache = <&L2_0>;
 34		};
 35		cpu2: cpu@2 {
 36			device_type = "cpu";
 37			compatible = "arm,cortex-a53";
 38			reg = <0x0 0x2>;
 39			enable-method = "psci";
 40			next-level-cache = <&L2_0>;
 41		};
 42		cpu3: cpu@3 {
 43			device_type = "cpu";
 44			compatible = "arm,cortex-a53";
 45			reg = <0x0 0x3>;
 46			enable-method = "psci";
 47			next-level-cache = <&L2_0>;
 48		};
 49		L2_0: l2-cache0 {
 50			compatible = "cache";
 51			cache-level = <2>;
 52			cache-unified;
 53		};
 54	};
 55
 56	psci {
 57		compatible = "arm,psci-0.2", "arm,psci";
 58		method = "smc";
 59		cpu_suspend = <0x84000001>;
 60		cpu_off = <0x84000002>;
 61		cpu_on = <0x84000003>;
 62	};
 63
 64	gic: interrupt-controller@c0001000 {
 65		#interrupt-cells = <3>;
 66		compatible = "arm,gic-400";
 67		interrupt-controller;
 68		reg = <0x0 0xc0001000 0x1000>,
 69		      <0x0 0xc0002000 0x2000>,
 70		      <0x0 0xc0004000 0x2000>,
 71		      <0x0 0xc0006000 0x2000>;
 72	};
 73
 74	pmu {
 75		compatible = "arm,cortex-a53-pmu";
 76		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
 77			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 78			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
 79			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 80		interrupt-affinity = <&cpu0>,
 81				     <&cpu1>,
 82				     <&cpu2>,
 83				     <&cpu3>;
 84	};
 85
 86	timer {
 87		compatible = "arm,armv8-timer";
 88		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
 89			      IRQ_TYPE_LEVEL_LOW)>,
 90			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
 91			      IRQ_TYPE_LEVEL_LOW)>,
 92			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
 93			      IRQ_TYPE_LEVEL_LOW)>,
 94			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
 95			      IRQ_TYPE_LEVEL_LOW)>;
 96	};
 97
 98	clk_bus: clk_bus {
 99		#clock-cells = <0>;
100
101		compatible = "fixed-clock";
102		clock-frequency = <198000000>;
103		clock-output-names = "BUSCLK";
104	};
105
106	soc {
107		#address-cells = <2>;
108		#size-cells = <1>;
109
110		compatible = "simple-bus";
111		interrupt-parent = <&gic>;
112		ranges;
113
114		eth0: ethernet@c1b00000 {
115			compatible = "cdns,gem";
116			reg = <0x0 0xc1b00000 0x1000>;
117			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
118			clocks = <&clk_bus>, <&clk_bus>;
119			clock-names = "hclk", "pclk";
120			phy-mode = "rmii";
121			/* Filled in by boot */
122			mac-address = [ 00 00 00 00 00 00 ];
123		};
124	};
125
126	amba {
127		#address-cells = <2>;
128		#size-cells = <1>;
 
129
130		compatible = "simple-bus";
131		interrupt-parent = <&gic>;
132		ranges;
133
134		timers: timer@fd100000 {
135			compatible = "arm,sp804", "arm,primecell";
136			reg = <0x0 0xfd100000 0x1000>;
137			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
138			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
139			clock-names = "timer0clk", "timer1clk", "apb_pclk";
140		};
141		wdog: watchdog@fd200000 {
142			compatible = "arm,sp805", "arm,primecell";
143			reg = <0x0 0xfd200000 0x1000>;
144			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
145			clocks = <&clk_bus>, <&clk_bus>;
146			clock-names = "wdog_clk", "apb_pclk";
147		};
148		uart0: serial@fe000000 {
149			compatible = "arm,pl011", "arm,primecell";
150			reg = <0x0 0xfe000000 0x1000>;
151			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
152			clocks = <&clk_bus>;
153			clock-names = "apb_pclk";
154			status = "disabled";
155		};
156		uart1: serial@fe100000 {
157			compatible = "arm,pl011", "arm,primecell";
158			reg = <0x0 0xfe100000 0x1000>;
159			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
160			clocks = <&clk_bus>;
161			clock-names = "apb_pclk";
162			status = "disabled";
163		};
164		uart2: serial@fe200000 {
165			compatible = "arm,pl011", "arm,primecell";
166			reg = <0x0 0xfe200000 0x1000>;
167			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
168			clocks = <&clk_bus>;
169			clock-names = "apb_pclk";
170			status = "disabled";
171		};
172		spi0: spi@fe800000 {
173			compatible = "arm,pl022", "arm,primecell";
174			reg = <0x0 0xfe800000 0x1000>;
175			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
176			clocks = <&clk_bus>, <&clk_bus>;
177			clock-names = "sspclk", "apb_pclk";
178		};
179		spi1: spi@fe900000 {
180			compatible = "arm,pl022", "arm,primecell";
181			reg = <0x0 0xfe900000 0x1000>;
182			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
183			clocks = <&clk_bus>, <&clk_bus>;
184			clock-names = "sspclk", "apb_pclk";
185		};
186		dmac0: dma-controller@c1128000 {
187			compatible = "arm,pl330", "arm,primecell";
188			reg = <0x0 0xc1128000 0x1000>;
189			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
190			clocks = <&clk_bus>;
191			clock-names = "apb_pclk";
192			#dma-cells = <1>;
193		};
194		gpio0: gpio@fd400000 {
195			#gpio-cells = <2>;
196			compatible = "arm,pl061", "arm,primecell";
197			gpio-controller;
198			reg = <0x0 0xfd400000 0x1000>;
199			clocks = <&clk_bus>;
200			clock-names = "apb_pclk";
201			status = "disabled";
202		};
203		gpio1: gpio@fd410000 {
204			#gpio-cells = <2>;
205			compatible = "arm,pl061", "arm,primecell";
206			gpio-controller;
207			reg = <0x0 0xfd410000 0x1000>;
208			clocks = <&clk_bus>;
209			clock-names = "apb_pclk";
210			status = "disabled";
211		};
212		gpio2: gpio@fd420000 {
213			#gpio-cells = <2>;
214			compatible = "arm,pl061", "arm,primecell";
215			gpio-controller;
216			reg = <0x0 0xfd420000 0x1000>;
217			clocks = <&clk_bus>;
218			clock-names = "apb_pclk";
219			status = "disabled";
220		};
221		gpio3: gpio@fd430000 {
222			#gpio-cells = <2>;
223			compatible = "arm,pl061", "arm,primecell";
224			gpio-controller;
225			reg = <0x0 0xfd430000 0x1000>;
226			clocks = <&clk_bus>;
227			clock-names = "apb_pclk";
228		};
229		gpio4: gpio@fd440000 {
230			#gpio-cells = <2>;
231			compatible = "arm,pl061", "arm,primecell";
232			gpio-controller;
233			reg = <0x0 0xfd440000 0x1000>;
234			clocks = <&clk_bus>;
235			clock-names = "apb_pclk";
236			status = "disabled";
237		};
238		gpio5: gpio@fd450000 {
239			#gpio-cells = <2>;
240			compatible = "arm,pl061", "arm,primecell";
241			gpio-controller;
242			reg = <0x0 0xfd450000 0x1000>;
243			clocks = <&clk_bus>;
244			clock-names = "apb_pclk";
245			status = "disabled";
246		};
247		gpio6: gpio@fd460000 {
248			#gpio-cells = <2>;
249			compatible = "arm,pl061", "arm,primecell";
250			gpio-controller;
251			reg = <0x0 0xfd460000 0x1000>;
252			clocks = <&clk_bus>;
253			clock-names = "apb_pclk";
254			status = "disabled";
255		};
256		gpio7: gpio@fd470000 {
257			#gpio-cells = <2>;
258			compatible = "arm,pl061", "arm,primecell";
259			gpio-controller;
260			reg = <0x0 0xfd470000 0x1000>;
261			clocks = <&clk_bus>;
262			clock-names = "apb_pclk";
263			status = "disabled";
264		};
265		gpio8: gpio@fd480000 {
266			#gpio-cells = <2>;
267			compatible = "arm,pl061", "arm,primecell";
268			gpio-controller;
269			reg = <0x0 0xfd480000 0x1000>;
270			clocks = <&clk_bus>;
271			clock-names = "apb_pclk";
272			status = "disabled";
273		};
274		gpio9: gpio@fd490000 {
275			#gpio-cells = <2>;
276			compatible = "arm,pl061", "arm,primecell";
277			gpio-controller;
278			reg = <0x0 0xfd490000 0x1000>;
279			clocks = <&clk_bus>;
280			clock-names = "apb_pclk";
281			status = "disabled";
282		};
283		gpio10: gpio@fd4a0000 {
284			#gpio-cells = <2>;
285			compatible = "arm,pl061", "arm,primecell";
286			gpio-controller;
287			reg = <0x0 0xfd4a0000 0x1000>;
288			clocks = <&clk_bus>;
289			clock-names = "apb_pclk";
290			status = "disabled";
291		};
292		gpio11: gpio@fd4b0000 {
293			#gpio-cells = <2>;
294			compatible = "arm,pl061", "arm,primecell";
295			gpio-controller;
296			reg = <0x0 0xfd4b0000 0x1000>;
297			clocks = <&clk_bus>;
298			clock-names = "apb_pclk";
299		};
300		gpio12: gpio@fd4c0000 {
301			#gpio-cells = <2>;
302			compatible = "arm,pl061", "arm,primecell";
303			gpio-controller;
304			reg = <0x0 0xfd4c0000 0x1000>;
305			clocks = <&clk_bus>;
306			clock-names = "apb_pclk";
307			status = "disabled";
308		};
309		gpio13: gpio@fd4d0000 {
310			#gpio-cells = <2>;
311			compatible = "arm,pl061", "arm,primecell";
312			gpio-controller;
313			reg = <0x0 0xfd4d0000 0x1000>;
314			clocks = <&clk_bus>;
315			clock-names = "apb_pclk";
316			status = "disabled";
317		};
318		gpio14: gpio@fd4e0000 {
319			#gpio-cells = <2>;
320			compatible = "arm,pl061", "arm,primecell";
321			gpio-controller;
322			reg = <0x0 0xfd4e0000 0x1000>;
323			clocks = <&clk_bus>;
324			clock-names = "apb_pclk";
325			status = "disabled";
326		};
327		gpio15: gpio@fd4f0000 {
328			#gpio-cells = <2>;
329			compatible = "arm,pl061", "arm,primecell";
330			gpio-controller;
331			reg = <0x0 0xfd4f0000 0x1000>;
332			clocks = <&clk_bus>;
333			clock-names = "apb_pclk";
334			status = "disabled";
335		};
336		gpio16: gpio@fd500000 {
337			#gpio-cells = <2>;
338			compatible = "arm,pl061", "arm,primecell";
339			gpio-controller;
340			reg = <0x0 0xfd500000 0x1000>;
341			clocks = <&clk_bus>;
342			clock-names = "apb_pclk";
343			status = "disabled";
344		};
345		gpio17: gpio@fd510000 {
346			#gpio-cells = <2>;
347			compatible = "arm,pl061", "arm,primecell";
348			gpio-controller;
349			reg = <0x0 0xfd510000 0x1000>;
350			clocks = <&clk_bus>;
351			clock-names = "apb_pclk";
352		};
353	};
354};
v5.14.15
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * dts file for lg1312 SoC
  4 *
  5 * Copyright (C) 2016, LG Electronics
  6 */
  7
  8#include <dt-bindings/gpio/gpio.h>
  9#include <dt-bindings/interrupt-controller/arm-gic.h>
 10
 11/ {
 12	#address-cells = <2>;
 13	#size-cells = <2>;
 14
 15	compatible = "lge,lg1312";
 16	interrupt-parent = <&gic>;
 17
 18	cpus {
 19		#address-cells = <2>;
 20		#size-cells = <0>;
 21
 22		cpu0: cpu@0 {
 23			device_type = "cpu";
 24			compatible = "arm,cortex-a53";
 25			reg = <0x0 0x0>;
 26			next-level-cache = <&L2_0>;
 27		};
 28		cpu1: cpu@1 {
 29			device_type = "cpu";
 30			compatible = "arm,cortex-a53";
 31			reg = <0x0 0x1>;
 32			enable-method = "psci";
 33			next-level-cache = <&L2_0>;
 34		};
 35		cpu2: cpu@2 {
 36			device_type = "cpu";
 37			compatible = "arm,cortex-a53";
 38			reg = <0x0 0x2>;
 39			enable-method = "psci";
 40			next-level-cache = <&L2_0>;
 41		};
 42		cpu3: cpu@3 {
 43			device_type = "cpu";
 44			compatible = "arm,cortex-a53";
 45			reg = <0x0 0x3>;
 46			enable-method = "psci";
 47			next-level-cache = <&L2_0>;
 48		};
 49		L2_0: l2-cache0 {
 50			compatible = "cache";
 
 
 51		};
 52	};
 53
 54	psci {
 55		compatible  = "arm,psci-0.2", "arm,psci";
 56		method = "smc";
 57		cpu_suspend = <0x84000001>;
 58		cpu_off = <0x84000002>;
 59		cpu_on = <0x84000003>;
 60	};
 61
 62	gic: interrupt-controller@c0001000 {
 63		#interrupt-cells = <3>;
 64		compatible = "arm,gic-400";
 65		interrupt-controller;
 66		reg = <0x0 0xc0001000 0x1000>,
 67		      <0x0 0xc0002000 0x2000>,
 68		      <0x0 0xc0004000 0x2000>,
 69		      <0x0 0xc0006000 0x2000>;
 70	};
 71
 72	pmu {
 73		compatible = "arm,cortex-a53-pmu";
 74		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
 75			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 76			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
 77			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 78		interrupt-affinity = <&cpu0>,
 79				     <&cpu1>,
 80				     <&cpu2>,
 81				     <&cpu3>;
 82	};
 83
 84	timer {
 85		compatible = "arm,armv8-timer";
 86		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
 87			      IRQ_TYPE_LEVEL_LOW)>,
 88			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
 89			      IRQ_TYPE_LEVEL_LOW)>,
 90			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
 91			      IRQ_TYPE_LEVEL_LOW)>,
 92			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
 93			      IRQ_TYPE_LEVEL_LOW)>;
 94	};
 95
 96	clk_bus: clk_bus {
 97		#clock-cells = <0>;
 98
 99		compatible = "fixed-clock";
100		clock-frequency = <198000000>;
101		clock-output-names = "BUSCLK";
102	};
103
104	soc {
105		#address-cells = <2>;
106		#size-cells = <1>;
107
108		compatible = "simple-bus";
109		interrupt-parent = <&gic>;
110		ranges;
111
112		eth0: ethernet@c1b00000 {
113			compatible = "cdns,gem";
114			reg = <0x0 0xc1b00000 0x1000>;
115			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
116			clocks = <&clk_bus>, <&clk_bus>;
117			clock-names = "hclk", "pclk";
118			phy-mode = "rmii";
119			/* Filled in by boot */
120			mac-address = [ 00 00 00 00 00 00 ];
121		};
122	};
123
124	amba {
125		#address-cells = <2>;
126		#size-cells = <1>;
127		#interrupt-cells = <3>;
128
129		compatible = "simple-bus";
130		interrupt-parent = <&gic>;
131		ranges;
132
133		timers: timer@fd100000 {
134			compatible = "arm,sp804", "arm,primecell";
135			reg = <0x0 0xfd100000 0x1000>;
136			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
137			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
138			clock-names = "timer0clk", "timer1clk", "apb_pclk";
139		};
140		wdog: watchdog@fd200000 {
141			compatible = "arm,sp805", "arm,primecell";
142			reg = <0x0 0xfd200000 0x1000>;
143			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
144			clocks = <&clk_bus>, <&clk_bus>;
145			clock-names = "wdog_clk", "apb_pclk";
146		};
147		uart0: serial@fe000000 {
148			compatible = "arm,pl011", "arm,primecell";
149			reg = <0x0 0xfe000000 0x1000>;
150			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
151			clocks = <&clk_bus>;
152			clock-names = "apb_pclk";
153			status="disabled";
154		};
155		uart1: serial@fe100000 {
156			compatible = "arm,pl011", "arm,primecell";
157			reg = <0x0 0xfe100000 0x1000>;
158			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
159			clocks = <&clk_bus>;
160			clock-names = "apb_pclk";
161			status="disabled";
162		};
163		uart2: serial@fe200000 {
164			compatible = "arm,pl011", "arm,primecell";
165			reg = <0x0 0xfe200000 0x1000>;
166			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
167			clocks = <&clk_bus>;
168			clock-names = "apb_pclk";
169			status="disabled";
170		};
171		spi0: spi@fe800000 {
172			compatible = "arm,pl022", "arm,primecell";
173			reg = <0x0 0xfe800000 0x1000>;
174			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
175			clocks = <&clk_bus>;
176			clock-names = "apb_pclk";
177		};
178		spi1: spi@fe900000 {
179			compatible = "arm,pl022", "arm,primecell";
180			reg = <0x0 0xfe900000 0x1000>;
181			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
182			clocks = <&clk_bus>;
183			clock-names = "apb_pclk";
184		};
185		dmac0: dma@c1128000 {
186			compatible = "arm,pl330", "arm,primecell";
187			reg = <0x0 0xc1128000 0x1000>;
188			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
189			clocks = <&clk_bus>;
190			clock-names = "apb_pclk";
 
191		};
192		gpio0: gpio@fd400000 {
193			#gpio-cells = <2>;
194			compatible = "arm,pl061", "arm,primecell";
195			gpio-controller;
196			reg = <0x0 0xfd400000 0x1000>;
197			clocks = <&clk_bus>;
198			clock-names = "apb_pclk";
199			status="disabled";
200		};
201		gpio1: gpio@fd410000 {
202			#gpio-cells = <2>;
203			compatible = "arm,pl061", "arm,primecell";
204			gpio-controller;
205			reg = <0x0 0xfd410000 0x1000>;
206			clocks = <&clk_bus>;
207			clock-names = "apb_pclk";
208			status="disabled";
209		};
210		gpio2: gpio@fd420000 {
211			#gpio-cells = <2>;
212			compatible = "arm,pl061", "arm,primecell";
213			gpio-controller;
214			reg = <0x0 0xfd420000 0x1000>;
215			clocks = <&clk_bus>;
216			clock-names = "apb_pclk";
217			status="disabled";
218		};
219		gpio3: gpio@fd430000 {
220			#gpio-cells = <2>;
221			compatible = "arm,pl061", "arm,primecell";
222			gpio-controller;
223			reg = <0x0 0xfd430000 0x1000>;
224			clocks = <&clk_bus>;
225			clock-names = "apb_pclk";
226		};
227		gpio4: gpio@fd440000 {
228			#gpio-cells = <2>;
229			compatible = "arm,pl061", "arm,primecell";
230			gpio-controller;
231			reg = <0x0 0xfd440000 0x1000>;
232			clocks = <&clk_bus>;
233			clock-names = "apb_pclk";
234			status="disabled";
235		};
236		gpio5: gpio@fd450000 {
237			#gpio-cells = <2>;
238			compatible = "arm,pl061", "arm,primecell";
239			gpio-controller;
240			reg = <0x0 0xfd450000 0x1000>;
241			clocks = <&clk_bus>;
242			clock-names = "apb_pclk";
243			status="disabled";
244		};
245		gpio6: gpio@fd460000 {
246			#gpio-cells = <2>;
247			compatible = "arm,pl061", "arm,primecell";
248			gpio-controller;
249			reg = <0x0 0xfd460000 0x1000>;
250			clocks = <&clk_bus>;
251			clock-names = "apb_pclk";
252			status="disabled";
253		};
254		gpio7: gpio@fd470000 {
255			#gpio-cells = <2>;
256			compatible = "arm,pl061", "arm,primecell";
257			gpio-controller;
258			reg = <0x0 0xfd470000 0x1000>;
259			clocks = <&clk_bus>;
260			clock-names = "apb_pclk";
261			status="disabled";
262		};
263		gpio8: gpio@fd480000 {
264			#gpio-cells = <2>;
265			compatible = "arm,pl061", "arm,primecell";
266			gpio-controller;
267			reg = <0x0 0xfd480000 0x1000>;
268			clocks = <&clk_bus>;
269			clock-names = "apb_pclk";
270			status="disabled";
271		};
272		gpio9: gpio@fd490000 {
273			#gpio-cells = <2>;
274			compatible = "arm,pl061", "arm,primecell";
275			gpio-controller;
276			reg = <0x0 0xfd490000 0x1000>;
277			clocks = <&clk_bus>;
278			clock-names = "apb_pclk";
279			status="disabled";
280		};
281		gpio10: gpio@fd4a0000 {
282			#gpio-cells = <2>;
283			compatible = "arm,pl061", "arm,primecell";
284			gpio-controller;
285			reg = <0x0 0xfd4a0000 0x1000>;
286			clocks = <&clk_bus>;
287			clock-names = "apb_pclk";
288			status="disabled";
289		};
290		gpio11: gpio@fd4b0000 {
291			#gpio-cells = <2>;
292			compatible = "arm,pl061", "arm,primecell";
293			gpio-controller;
294			reg = <0x0 0xfd4b0000 0x1000>;
295			clocks = <&clk_bus>;
296			clock-names = "apb_pclk";
297		};
298		gpio12: gpio@fd4c0000 {
299			#gpio-cells = <2>;
300			compatible = "arm,pl061", "arm,primecell";
301			gpio-controller;
302			reg = <0x0 0xfd4c0000 0x1000>;
303			clocks = <&clk_bus>;
304			clock-names = "apb_pclk";
305			status="disabled";
306		};
307		gpio13: gpio@fd4d0000 {
308			#gpio-cells = <2>;
309			compatible = "arm,pl061", "arm,primecell";
310			gpio-controller;
311			reg = <0x0 0xfd4d0000 0x1000>;
312			clocks = <&clk_bus>;
313			clock-names = "apb_pclk";
314			status="disabled";
315		};
316		gpio14: gpio@fd4e0000 {
317			#gpio-cells = <2>;
318			compatible = "arm,pl061", "arm,primecell";
319			gpio-controller;
320			reg = <0x0 0xfd4e0000 0x1000>;
321			clocks = <&clk_bus>;
322			clock-names = "apb_pclk";
323			status="disabled";
324		};
325		gpio15: gpio@fd4f0000 {
326			#gpio-cells = <2>;
327			compatible = "arm,pl061", "arm,primecell";
328			gpio-controller;
329			reg = <0x0 0xfd4f0000 0x1000>;
330			clocks = <&clk_bus>;
331			clock-names = "apb_pclk";
332			status="disabled";
333		};
334		gpio16: gpio@fd500000 {
335			#gpio-cells = <2>;
336			compatible = "arm,pl061", "arm,primecell";
337			gpio-controller;
338			reg = <0x0 0xfd500000 0x1000>;
339			clocks = <&clk_bus>;
340			clock-names = "apb_pclk";
341			status="disabled";
342		};
343		gpio17: gpio@fd510000 {
344			#gpio-cells = <2>;
345			compatible = "arm,pl061", "arm,primecell";
346			gpio-controller;
347			reg = <0x0 0xfd510000 0x1000>;
348			clocks = <&clk_bus>;
349			clock-names = "apb_pclk";
350		};
351	};
352};