Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2008-2009 ST-Ericsson SA
4 *
5 * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
6 */
7#include <linux/types.h>
8#include <linux/init.h>
9#include <linux/device.h>
10#include <linux/amba/bus.h>
11#include <linux/interrupt.h>
12#include <linux/irq.h>
13#include <linux/irqchip.h>
14#include <linux/irqchip/arm-gic.h>
15#include <linux/mfd/dbx500-prcmu.h>
16#include <linux/platform_data/arm-ux500-pm.h>
17#include <linux/platform_device.h>
18#include <linux/io.h>
19#include <linux/of.h>
20#include <linux/of_address.h>
21#include <linux/of_platform.h>
22#include <linux/regulator/machine.h>
23
24#include <asm/outercache.h>
25#include <asm/hardware/cache-l2x0.h>
26#include <asm/mach/map.h>
27#include <asm/mach/arch.h>
28
29static int __init ux500_l2x0_unlock(void)
30{
31 int i;
32 struct device_node *np;
33 void __iomem *l2x0_base;
34
35 np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
36 l2x0_base = of_iomap(np, 0);
37 of_node_put(np);
38 if (!l2x0_base)
39 return -ENODEV;
40
41 /*
42 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
43 * apparently locks both caches before jumping to the kernel. The
44 * l2x0 core will not touch the unlock registers if the l2x0 is
45 * already enabled, so we do it right here instead. The PL310 has
46 * 8 sets of registers, one per possible CPU.
47 */
48 for (i = 0; i < 8; i++) {
49 writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
50 i * L2X0_LOCKDOWN_STRIDE);
51 writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
52 i * L2X0_LOCKDOWN_STRIDE);
53 }
54 iounmap(l2x0_base);
55 return 0;
56}
57
58static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
59{
60 /*
61 * We can't write to secure registers as we are in non-secure
62 * mode, until we have some SMI service available.
63 */
64}
65
66/*
67 * FIXME: Should we set up the GPIO domain here?
68 *
69 * The problem is that we cannot put the interrupt resources into the platform
70 * device until the irqdomain has been added. Right now, we set the GIC interrupt
71 * domain from init_irq(), then load the gpio driver from
72 * core_initcall(nmk_gpio_init) and add the platform devices from
73 * arch_initcall(customize_machine).
74 *
75 * This feels fragile because it depends on the gpio device getting probed
76 * _before_ any device uses the gpio interrupts.
77*/
78static void __init ux500_init_irq(void)
79{
80 struct device_node *np;
81 struct resource r;
82
83 irqchip_init();
84 prcmu_early_init();
85 np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
86 of_address_to_resource(np, 0, &r);
87 of_node_put(np);
88 if (!r.start) {
89 pr_err("could not find PRCMU base resource\n");
90 return;
91 }
92 ux500_pm_init(r.start, r.end-r.start);
93
94 /* Unlock before init */
95 ux500_l2x0_unlock();
96 outer_cache.write_sec = ux500_l2c310_write_sec;
97}
98
99static void ux500_restart(enum reboot_mode mode, const char *cmd)
100{
101 local_irq_disable();
102 local_fiq_disable();
103
104 prcmu_system_reset(0);
105}
106
107static const struct of_device_id u8500_local_bus_nodes[] = {
108 /* only create devices below soc node */
109 { .compatible = "stericsson,db8500", },
110 { .compatible = "simple-bus"},
111 { },
112};
113
114static void __init u8500_init_machine(void)
115{
116 of_platform_populate(NULL, u8500_local_bus_nodes,
117 NULL, NULL);
118}
119
120static const char * stericsson_dt_platform_compat[] = {
121 "st-ericsson,u8500",
122 "st-ericsson,u9500",
123 NULL,
124};
125
126DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
127 .l2c_aux_val = 0,
128 .l2c_aux_mask = ~0,
129 .init_irq = ux500_init_irq,
130 .init_machine = u8500_init_machine,
131 .dt_compat = stericsson_dt_platform_compat,
132 .restart = ux500_restart,
133MACHINE_END
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2008-2009 ST-Ericsson SA
4 *
5 * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
6 */
7#include <linux/types.h>
8#include <linux/init.h>
9#include <linux/device.h>
10#include <linux/amba/bus.h>
11#include <linux/interrupt.h>
12#include <linux/irq.h>
13#include <linux/irqchip.h>
14#include <linux/irqchip/arm-gic.h>
15#include <linux/mfd/dbx500-prcmu.h>
16#include <linux/platform_data/arm-ux500-pm.h>
17#include <linux/platform_device.h>
18#include <linux/io.h>
19#include <linux/of.h>
20#include <linux/of_address.h>
21#include <linux/of_platform.h>
22#include <linux/regulator/machine.h>
23
24#include <asm/outercache.h>
25#include <asm/hardware/cache-l2x0.h>
26#include <asm/mach/map.h>
27#include <asm/mach/arch.h>
28
29#include "db8500-regs.h"
30#include "pm_domains.h"
31
32static int __init ux500_l2x0_unlock(void)
33{
34 int i;
35 struct device_node *np;
36 void __iomem *l2x0_base;
37
38 np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
39 l2x0_base = of_iomap(np, 0);
40 of_node_put(np);
41 if (!l2x0_base)
42 return -ENODEV;
43
44 /*
45 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
46 * apparently locks both caches before jumping to the kernel. The
47 * l2x0 core will not touch the unlock registers if the l2x0 is
48 * already enabled, so we do it right here instead. The PL310 has
49 * 8 sets of registers, one per possible CPU.
50 */
51 for (i = 0; i < 8; i++) {
52 writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
53 i * L2X0_LOCKDOWN_STRIDE);
54 writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
55 i * L2X0_LOCKDOWN_STRIDE);
56 }
57 iounmap(l2x0_base);
58 return 0;
59}
60
61static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
62{
63 /*
64 * We can't write to secure registers as we are in non-secure
65 * mode, until we have some SMI service available.
66 */
67}
68
69/*
70 * FIXME: Should we set up the GPIO domain here?
71 *
72 * The problem is that we cannot put the interrupt resources into the platform
73 * device until the irqdomain has been added. Right now, we set the GIC interrupt
74 * domain from init_irq(), then load the gpio driver from
75 * core_initcall(nmk_gpio_init) and add the platform devices from
76 * arch_initcall(customize_machine).
77 *
78 * This feels fragile because it depends on the gpio device getting probed
79 * _before_ any device uses the gpio interrupts.
80*/
81static void __init ux500_init_irq(void)
82{
83 struct device_node *np;
84 struct resource r;
85
86 irqchip_init();
87 prcmu_early_init();
88 np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
89 of_address_to_resource(np, 0, &r);
90 of_node_put(np);
91 if (!r.start) {
92 pr_err("could not find PRCMU base resource\n");
93 return;
94 }
95 ux500_pm_init(r.start, r.end-r.start);
96
97 /* Unlock before init */
98 ux500_l2x0_unlock();
99 outer_cache.write_sec = ux500_l2c310_write_sec;
100}
101
102static void ux500_restart(enum reboot_mode mode, const char *cmd)
103{
104 local_irq_disable();
105 local_fiq_disable();
106
107 prcmu_system_reset(0);
108}
109
110static const struct of_device_id u8500_local_bus_nodes[] = {
111 /* only create devices below soc node */
112 { .compatible = "stericsson,db8500", },
113 { .compatible = "simple-bus"},
114 { },
115};
116
117static void __init u8500_init_machine(void)
118{
119 /* Initialize ux500 power domains */
120 ux500_pm_domains_init();
121
122 of_platform_populate(NULL, u8500_local_bus_nodes,
123 NULL, NULL);
124}
125
126static const char * stericsson_dt_platform_compat[] = {
127 "st-ericsson,u8500",
128 "st-ericsson,u9500",
129 NULL,
130};
131
132DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
133 .l2c_aux_val = 0,
134 .l2c_aux_mask = ~0,
135 .init_irq = ux500_init_irq,
136 .init_machine = u8500_init_machine,
137 .dt_compat = stericsson_dt_platform_compat,
138 .restart = ux500_restart,
139MACHINE_END