Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2011 - 2014 Xilinx
4 */
5
6/ {
7 #address-cells = <1>;
8 #size-cells = <1>;
9 compatible = "xlnx,zynq-7000";
10
11 cpus {
12 #address-cells = <1>;
13 #size-cells = <0>;
14
15 cpu0: cpu@0 {
16 compatible = "arm,cortex-a9";
17 device_type = "cpu";
18 reg = <0>;
19 clocks = <&clkc 3>;
20 clock-latency = <1000>;
21 cpu0-supply = <®ulator_vccpint>;
22 operating-points = <
23 /* kHz uV */
24 666667 1000000
25 333334 1000000
26 >;
27 };
28
29 cpu1: cpu@1 {
30 compatible = "arm,cortex-a9";
31 device_type = "cpu";
32 reg = <1>;
33 clocks = <&clkc 3>;
34 };
35 };
36
37 fpga_full: fpga-full {
38 compatible = "fpga-region";
39 fpga-mgr = <&devcfg>;
40 #address-cells = <1>;
41 #size-cells = <1>;
42 ranges;
43 };
44
45 pmu@f8891000 {
46 compatible = "arm,cortex-a9-pmu";
47 interrupts = <0 5 4>, <0 6 4>;
48 interrupt-parent = <&intc>;
49 reg = <0xf8891000 0x1000>,
50 <0xf8893000 0x1000>;
51 };
52
53 regulator_vccpint: fixedregulator {
54 compatible = "regulator-fixed";
55 regulator-name = "VCCPINT";
56 regulator-min-microvolt = <1000000>;
57 regulator-max-microvolt = <1000000>;
58 regulator-boot-on;
59 regulator-always-on;
60 };
61
62 replicator {
63 compatible = "arm,coresight-static-replicator";
64 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
65 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
66
67 out-ports {
68 #address-cells = <1>;
69 #size-cells = <0>;
70
71 /* replicator output ports */
72 port@0 {
73 reg = <0>;
74 replicator_out_port0: endpoint {
75 remote-endpoint = <&tpiu_in_port>;
76 };
77 };
78 port@1 {
79 reg = <1>;
80 replicator_out_port1: endpoint {
81 remote-endpoint = <&etb_in_port>;
82 };
83 };
84 };
85 in-ports {
86 /* replicator input port */
87 port {
88 replicator_in_port0: endpoint {
89 remote-endpoint = <&funnel_out_port>;
90 };
91 };
92 };
93 };
94
95 amba: axi {
96 compatible = "simple-bus";
97 #address-cells = <1>;
98 #size-cells = <1>;
99 interrupt-parent = <&intc>;
100 ranges;
101
102 adc: adc@f8007100 {
103 compatible = "xlnx,zynq-xadc-1.00.a";
104 reg = <0xf8007100 0x20>;
105 interrupts = <0 7 4>;
106 interrupt-parent = <&intc>;
107 clocks = <&clkc 12>;
108 };
109
110 can0: can@e0008000 {
111 compatible = "xlnx,zynq-can-1.0";
112 status = "disabled";
113 clocks = <&clkc 19>, <&clkc 36>;
114 clock-names = "can_clk", "pclk";
115 reg = <0xe0008000 0x1000>;
116 interrupts = <0 28 4>;
117 interrupt-parent = <&intc>;
118 tx-fifo-depth = <0x40>;
119 rx-fifo-depth = <0x40>;
120 };
121
122 can1: can@e0009000 {
123 compatible = "xlnx,zynq-can-1.0";
124 status = "disabled";
125 clocks = <&clkc 20>, <&clkc 37>;
126 clock-names = "can_clk", "pclk";
127 reg = <0xe0009000 0x1000>;
128 interrupts = <0 51 4>;
129 interrupt-parent = <&intc>;
130 tx-fifo-depth = <0x40>;
131 rx-fifo-depth = <0x40>;
132 };
133
134 gpio0: gpio@e000a000 {
135 compatible = "xlnx,zynq-gpio-1.0";
136 #gpio-cells = <2>;
137 clocks = <&clkc 42>;
138 gpio-controller;
139 interrupt-controller;
140 #interrupt-cells = <2>;
141 interrupt-parent = <&intc>;
142 interrupts = <0 20 4>;
143 reg = <0xe000a000 0x1000>;
144 };
145
146 i2c0: i2c@e0004000 {
147 compatible = "cdns,i2c-r1p10";
148 status = "disabled";
149 clocks = <&clkc 38>;
150 interrupt-parent = <&intc>;
151 interrupts = <0 25 4>;
152 reg = <0xe0004000 0x1000>;
153 #address-cells = <1>;
154 #size-cells = <0>;
155 };
156
157 i2c1: i2c@e0005000 {
158 compatible = "cdns,i2c-r1p10";
159 status = "disabled";
160 clocks = <&clkc 39>;
161 interrupt-parent = <&intc>;
162 interrupts = <0 48 4>;
163 reg = <0xe0005000 0x1000>;
164 #address-cells = <1>;
165 #size-cells = <0>;
166 };
167
168 intc: interrupt-controller@f8f01000 {
169 compatible = "arm,cortex-a9-gic";
170 #interrupt-cells = <3>;
171 interrupt-controller;
172 reg = <0xF8F01000 0x1000>,
173 <0xF8F00100 0x100>;
174 };
175
176 L2: cache-controller@f8f02000 {
177 compatible = "arm,pl310-cache";
178 reg = <0xF8F02000 0x1000>;
179 interrupts = <0 2 4>;
180 arm,data-latency = <3 2 2>;
181 arm,tag-latency = <2 2 2>;
182 cache-unified;
183 cache-level = <2>;
184 };
185
186 mc: memory-controller@f8006000 {
187 compatible = "xlnx,zynq-ddrc-a05";
188 reg = <0xf8006000 0x1000>;
189 };
190
191 uart0: serial@e0000000 {
192 compatible = "xlnx,xuartps", "cdns,uart-r1p8";
193 status = "disabled";
194 clocks = <&clkc 23>, <&clkc 40>;
195 clock-names = "uart_clk", "pclk";
196 reg = <0xE0000000 0x1000>;
197 interrupts = <0 27 4>;
198 };
199
200 uart1: serial@e0001000 {
201 compatible = "xlnx,xuartps", "cdns,uart-r1p8";
202 status = "disabled";
203 clocks = <&clkc 24>, <&clkc 41>;
204 clock-names = "uart_clk", "pclk";
205 reg = <0xE0001000 0x1000>;
206 interrupts = <0 50 4>;
207 };
208
209 spi0: spi@e0006000 {
210 compatible = "xlnx,zynq-spi-r1p6";
211 reg = <0xe0006000 0x1000>;
212 status = "disabled";
213 interrupt-parent = <&intc>;
214 interrupts = <0 26 4>;
215 clocks = <&clkc 25>, <&clkc 34>;
216 clock-names = "ref_clk", "pclk";
217 #address-cells = <1>;
218 #size-cells = <0>;
219 };
220
221 spi1: spi@e0007000 {
222 compatible = "xlnx,zynq-spi-r1p6";
223 reg = <0xe0007000 0x1000>;
224 status = "disabled";
225 interrupt-parent = <&intc>;
226 interrupts = <0 49 4>;
227 clocks = <&clkc 26>, <&clkc 35>;
228 clock-names = "ref_clk", "pclk";
229 #address-cells = <1>;
230 #size-cells = <0>;
231 };
232
233 gem0: ethernet@e000b000 {
234 compatible = "cdns,zynq-gem", "cdns,gem";
235 reg = <0xe000b000 0x1000>;
236 status = "disabled";
237 interrupts = <0 22 4>;
238 clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
239 clock-names = "pclk", "hclk", "tx_clk";
240 #address-cells = <1>;
241 #size-cells = <0>;
242 };
243
244 gem1: ethernet@e000c000 {
245 compatible = "cdns,zynq-gem", "cdns,gem";
246 reg = <0xe000c000 0x1000>;
247 status = "disabled";
248 interrupts = <0 45 4>;
249 clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
250 clock-names = "pclk", "hclk", "tx_clk";
251 #address-cells = <1>;
252 #size-cells = <0>;
253 };
254
255 sdhci0: mmc@e0100000 {
256 compatible = "arasan,sdhci-8.9a";
257 status = "disabled";
258 clock-names = "clk_xin", "clk_ahb";
259 clocks = <&clkc 21>, <&clkc 32>;
260 interrupt-parent = <&intc>;
261 interrupts = <0 24 4>;
262 reg = <0xe0100000 0x1000>;
263 };
264
265 sdhci1: mmc@e0101000 {
266 compatible = "arasan,sdhci-8.9a";
267 status = "disabled";
268 clock-names = "clk_xin", "clk_ahb";
269 clocks = <&clkc 22>, <&clkc 33>;
270 interrupt-parent = <&intc>;
271 interrupts = <0 47 4>;
272 reg = <0xe0101000 0x1000>;
273 };
274
275 slcr: slcr@f8000000 {
276 #address-cells = <1>;
277 #size-cells = <1>;
278 compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
279 reg = <0xF8000000 0x1000>;
280 ranges;
281 clkc: clkc@100 {
282 #clock-cells = <1>;
283 compatible = "xlnx,ps7-clkc";
284 fclk-enable = <0>;
285 clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
286 "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
287 "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
288 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
289 "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
290 "dma", "usb0_aper", "usb1_aper", "gem0_aper",
291 "gem1_aper", "sdio0_aper", "sdio1_aper",
292 "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
293 "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
294 "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
295 "dbg_trc", "dbg_apb";
296 reg = <0x100 0x100>;
297 };
298
299 rstc: rstc@200 {
300 compatible = "xlnx,zynq-reset";
301 reg = <0x200 0x48>;
302 #reset-cells = <1>;
303 syscon = <&slcr>;
304 };
305
306 pinctrl0: pinctrl@700 {
307 compatible = "xlnx,pinctrl-zynq";
308 reg = <0x700 0x200>;
309 syscon = <&slcr>;
310 };
311 };
312
313 dmac_s: dmac@f8003000 {
314 compatible = "arm,pl330", "arm,primecell";
315 reg = <0xf8003000 0x1000>;
316 interrupt-parent = <&intc>;
317 interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
318 "dma4", "dma5", "dma6", "dma7";
319 interrupts = <0 13 4>,
320 <0 14 4>, <0 15 4>,
321 <0 16 4>, <0 17 4>,
322 <0 40 4>, <0 41 4>,
323 <0 42 4>, <0 43 4>;
324 #dma-cells = <1>;
325 #dma-channels = <8>;
326 #dma-requests = <4>;
327 clocks = <&clkc 27>;
328 clock-names = "apb_pclk";
329 };
330
331 devcfg: devcfg@f8007000 {
332 compatible = "xlnx,zynq-devcfg-1.0";
333 reg = <0xf8007000 0x100>;
334 interrupt-parent = <&intc>;
335 interrupts = <0 8 4>;
336 clocks = <&clkc 12>;
337 clock-names = "ref_clk";
338 syscon = <&slcr>;
339 };
340
341 global_timer: timer@f8f00200 {
342 compatible = "arm,cortex-a9-global-timer";
343 reg = <0xf8f00200 0x20>;
344 interrupts = <1 11 0x301>;
345 interrupt-parent = <&intc>;
346 clocks = <&clkc 4>;
347 };
348
349 ttc0: timer@f8001000 {
350 interrupt-parent = <&intc>;
351 interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
352 compatible = "cdns,ttc";
353 clocks = <&clkc 6>;
354 reg = <0xF8001000 0x1000>;
355 };
356
357 ttc1: timer@f8002000 {
358 interrupt-parent = <&intc>;
359 interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
360 compatible = "cdns,ttc";
361 clocks = <&clkc 6>;
362 reg = <0xF8002000 0x1000>;
363 };
364
365 scutimer: timer@f8f00600 {
366 interrupt-parent = <&intc>;
367 interrupts = <1 13 0x301>;
368 compatible = "arm,cortex-a9-twd-timer";
369 reg = <0xf8f00600 0x20>;
370 clocks = <&clkc 4>;
371 };
372
373 usb0: usb@e0002000 {
374 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
375 status = "disabled";
376 clocks = <&clkc 28>;
377 interrupt-parent = <&intc>;
378 interrupts = <0 21 4>;
379 reg = <0xe0002000 0x1000>;
380 phy_type = "ulpi";
381 };
382
383 usb1: usb@e0003000 {
384 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
385 status = "disabled";
386 clocks = <&clkc 29>;
387 interrupt-parent = <&intc>;
388 interrupts = <0 44 4>;
389 reg = <0xe0003000 0x1000>;
390 phy_type = "ulpi";
391 };
392
393 watchdog0: watchdog@f8005000 {
394 clocks = <&clkc 45>;
395 compatible = "cdns,wdt-r1p2";
396 interrupt-parent = <&intc>;
397 interrupts = <0 9 1>;
398 reg = <0xf8005000 0x1000>;
399 timeout-sec = <10>;
400 };
401
402 etb@f8801000 {
403 compatible = "arm,coresight-etb10", "arm,primecell";
404 reg = <0xf8801000 0x1000>;
405 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
406 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
407 in-ports {
408 port {
409 etb_in_port: endpoint {
410 remote-endpoint = <&replicator_out_port1>;
411 };
412 };
413 };
414 };
415
416 tpiu@f8803000 {
417 compatible = "arm,coresight-tpiu", "arm,primecell";
418 reg = <0xf8803000 0x1000>;
419 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
420 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
421 in-ports {
422 port {
423 tpiu_in_port: endpoint {
424 remote-endpoint = <&replicator_out_port0>;
425 };
426 };
427 };
428 };
429
430 funnel@f8804000 {
431 compatible = "arm,coresight-static-funnel", "arm,primecell";
432 reg = <0xf8804000 0x1000>;
433 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
434 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
435
436 /* funnel output ports */
437 out-ports {
438 port {
439 funnel_out_port: endpoint {
440 remote-endpoint =
441 <&replicator_in_port0>;
442 };
443 };
444 };
445
446 in-ports {
447 #address-cells = <1>;
448 #size-cells = <0>;
449
450 /* funnel input ports */
451 port@0 {
452 reg = <0>;
453 funnel0_in_port0: endpoint {
454 remote-endpoint = <&ptm0_out_port>;
455 };
456 };
457
458 port@1 {
459 reg = <1>;
460 funnel0_in_port1: endpoint {
461 remote-endpoint = <&ptm1_out_port>;
462 };
463 };
464
465 port@2 {
466 reg = <2>;
467 funnel0_in_port2: endpoint {
468 };
469 };
470 /* The other input ports are not connect to anything */
471 };
472 };
473
474 ptm@f889c000 {
475 compatible = "arm,coresight-etm3x", "arm,primecell";
476 reg = <0xf889c000 0x1000>;
477 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
478 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
479 cpu = <&cpu0>;
480 out-ports {
481 port {
482 ptm0_out_port: endpoint {
483 remote-endpoint = <&funnel0_in_port0>;
484 };
485 };
486 };
487 };
488
489 ptm@f889d000 {
490 compatible = "arm,coresight-etm3x", "arm,primecell";
491 reg = <0xf889d000 0x1000>;
492 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
493 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
494 cpu = <&cpu1>;
495 out-ports {
496 port {
497 ptm1_out_port: endpoint {
498 remote-endpoint = <&funnel0_in_port1>;
499 };
500 };
501 };
502 };
503 };
504};