Loading...
Note: File does not exist in v6.13.7.
1/*
2 * Copyright 2014 Chen-Yu Tsai
3 *
4 * Chen-Yu Tsai <wens@csie.org>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45#include <dt-bindings/interrupt-controller/arm-gic.h>
46
47#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
48#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
49
50/ {
51 interrupt-parent = <&gic>;
52 #address-cells = <1>;
53 #size-cells = <1>;
54
55 chosen {
56 #address-cells = <1>;
57 #size-cells = <1>;
58 ranges;
59
60 simplefb_lcd: framebuffer-lcd0 {
61 compatible = "allwinner,simple-framebuffer",
62 "simple-framebuffer";
63 allwinner,pipeline = "de_be0-lcd0";
64 clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
65 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
66 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
67 status = "disabled";
68 };
69 };
70
71 de: display-engine {
72 /* compatible gets set in SoC specific dtsi file */
73 allwinner,pipelines = <&fe0>;
74 status = "disabled";
75 };
76
77 timer {
78 compatible = "arm,armv7-timer";
79 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
80 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
81 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
82 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
83 clock-frequency = <24000000>;
84 arm,cpu-registers-not-fw-configured;
85 };
86
87 cpus {
88 enable-method = "allwinner,sun8i-a23";
89 #address-cells = <1>;
90 #size-cells = <0>;
91
92 cpu0: cpu@0 {
93 compatible = "arm,cortex-a7";
94 device_type = "cpu";
95 reg = <0>;
96 };
97
98 cpu@1 {
99 compatible = "arm,cortex-a7";
100 device_type = "cpu";
101 reg = <1>;
102 };
103 };
104
105 clocks {
106 #address-cells = <1>;
107 #size-cells = <1>;
108 ranges;
109
110 osc24M: osc24M_clk {
111 #clock-cells = <0>;
112 compatible = "fixed-clock";
113 clock-frequency = <24000000>;
114 clock-accuracy = <50000>;
115 clock-output-names = "osc24M";
116 };
117
118 ext_osc32k: ext_osc32k_clk {
119 #clock-cells = <0>;
120 compatible = "fixed-clock";
121 clock-frequency = <32768>;
122 clock-accuracy = <50000>;
123 clock-output-names = "ext-osc32k";
124 };
125 };
126
127 soc {
128 compatible = "simple-bus";
129 #address-cells = <1>;
130 #size-cells = <1>;
131 ranges;
132
133 system-control@1c00000 {
134 compatible = "allwinner,sun8i-a23-system-control";
135 reg = <0x01c00000 0x30>;
136 #address-cells = <1>;
137 #size-cells = <1>;
138 ranges;
139
140 sram_c: sram@1d00000 {
141 compatible = "mmio-sram";
142 reg = <0x01d00000 0x80000>;
143 #address-cells = <1>;
144 #size-cells = <1>;
145 ranges = <0 0x01d00000 0x80000>;
146
147 ve_sram: sram-section@0 {
148 compatible = "allwinner,sun8i-a23-sram-c1",
149 "allwinner,sun4i-a10-sram-c1";
150 reg = <0x000000 0x80000>;
151 };
152 };
153 };
154
155 dma: dma-controller@1c02000 {
156 compatible = "allwinner,sun8i-a23-dma";
157 reg = <0x01c02000 0x1000>;
158 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
159 clocks = <&ccu CLK_BUS_DMA>;
160 resets = <&ccu RST_BUS_DMA>;
161 #dma-cells = <1>;
162 };
163
164 nfc: nand-controller@1c03000 {
165 compatible = "allwinner,sun8i-a23-nand-controller";
166 reg = <0x01c03000 0x1000>;
167 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
168 clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
169 clock-names = "ahb", "mod";
170 resets = <&ccu RST_BUS_NAND>;
171 reset-names = "ahb";
172 dmas = <&dma 5>;
173 dma-names = "rxtx";
174 pinctrl-names = "default";
175 pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
176 status = "disabled";
177 #address-cells = <1>;
178 #size-cells = <0>;
179 };
180
181 tcon0: lcd-controller@1c0c000 {
182 /* compatible gets set in SoC specific dtsi file */
183 reg = <0x01c0c000 0x1000>;
184 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
185 dmas = <&dma 12>;
186 clocks = <&ccu CLK_BUS_LCD>,
187 <&ccu CLK_LCD_CH0>,
188 <&ccu 13>;
189 clock-names = "ahb",
190 "tcon-ch0",
191 "lvds-alt";
192 clock-output-names = "tcon-pixel-clock";
193 #clock-cells = <0>;
194 resets = <&ccu RST_BUS_LCD>,
195 <&ccu RST_BUS_LVDS>;
196 reset-names = "lcd",
197 "lvds";
198 status = "disabled";
199
200 ports {
201 #address-cells = <1>;
202 #size-cells = <0>;
203
204 tcon0_in: port@0 {
205 reg = <0>;
206
207 tcon0_in_drc0: endpoint {
208 remote-endpoint = <&drc0_out_tcon0>;
209 };
210 };
211
212 tcon0_out: port@1 {
213 reg = <1>;
214 };
215 };
216 };
217
218 mmc0: mmc@1c0f000 {
219 compatible = "allwinner,sun7i-a20-mmc";
220 reg = <0x01c0f000 0x1000>;
221 clocks = <&ccu CLK_BUS_MMC0>,
222 <&ccu CLK_MMC0>,
223 <&ccu CLK_MMC0_OUTPUT>,
224 <&ccu CLK_MMC0_SAMPLE>;
225 clock-names = "ahb",
226 "mmc",
227 "output",
228 "sample";
229 resets = <&ccu RST_BUS_MMC0>;
230 reset-names = "ahb";
231 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
232 pinctrl-names = "default";
233 pinctrl-0 = <&mmc0_pins>;
234 status = "disabled";
235 #address-cells = <1>;
236 #size-cells = <0>;
237 };
238
239 mmc1: mmc@1c10000 {
240 compatible = "allwinner,sun7i-a20-mmc";
241 reg = <0x01c10000 0x1000>;
242 clocks = <&ccu CLK_BUS_MMC1>,
243 <&ccu CLK_MMC1>,
244 <&ccu CLK_MMC1_OUTPUT>,
245 <&ccu CLK_MMC1_SAMPLE>;
246 clock-names = "ahb",
247 "mmc",
248 "output",
249 "sample";
250 resets = <&ccu RST_BUS_MMC1>;
251 reset-names = "ahb";
252 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
253 status = "disabled";
254 #address-cells = <1>;
255 #size-cells = <0>;
256 };
257
258 mmc2: mmc@1c11000 {
259 compatible = "allwinner,sun7i-a20-mmc";
260 reg = <0x01c11000 0x1000>;
261 clocks = <&ccu CLK_BUS_MMC2>,
262 <&ccu CLK_MMC2>,
263 <&ccu CLK_MMC2_OUTPUT>,
264 <&ccu CLK_MMC2_SAMPLE>;
265 clock-names = "ahb",
266 "mmc",
267 "output",
268 "sample";
269 resets = <&ccu RST_BUS_MMC2>;
270 reset-names = "ahb";
271 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
272 status = "disabled";
273 #address-cells = <1>;
274 #size-cells = <0>;
275 };
276
277 usb_otg: usb@1c19000 {
278 /* compatible gets set in SoC specific dtsi file */
279 reg = <0x01c19000 0x0400>;
280 clocks = <&ccu CLK_BUS_OTG>;
281 resets = <&ccu RST_BUS_OTG>;
282 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
283 interrupt-names = "mc";
284 phys = <&usbphy 0>;
285 phy-names = "usb";
286 extcon = <&usbphy 0>;
287 dr_mode = "otg";
288 status = "disabled";
289 };
290
291 usbphy: phy@1c19400 {
292 /*
293 * compatible and address regions get set in
294 * SoC specific dtsi file
295 */
296 clocks = <&ccu CLK_USB_PHY0>,
297 <&ccu CLK_USB_PHY1>;
298 clock-names = "usb0_phy",
299 "usb1_phy";
300 resets = <&ccu RST_USB_PHY0>,
301 <&ccu RST_USB_PHY1>;
302 reset-names = "usb0_reset",
303 "usb1_reset";
304 status = "disabled";
305 #phy-cells = <1>;
306 };
307
308 ehci0: usb@1c1a000 {
309 compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
310 reg = <0x01c1a000 0x100>;
311 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
312 clocks = <&ccu CLK_BUS_EHCI>;
313 resets = <&ccu RST_BUS_EHCI>;
314 phys = <&usbphy 1>;
315 phy-names = "usb";
316 status = "disabled";
317 };
318
319 ohci0: usb@1c1a400 {
320 compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
321 reg = <0x01c1a400 0x100>;
322 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
323 clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
324 resets = <&ccu RST_BUS_OHCI>;
325 phys = <&usbphy 1>;
326 phy-names = "usb";
327 status = "disabled";
328 };
329
330 ccu: clock@1c20000 {
331 reg = <0x01c20000 0x400>;
332 clocks = <&osc24M>, <&rtc 0>;
333 clock-names = "hosc", "losc";
334 #clock-cells = <1>;
335 #reset-cells = <1>;
336 };
337
338 pio: pinctrl@1c20800 {
339 /* compatible gets set in SoC specific dtsi file */
340 reg = <0x01c20800 0x400>;
341 interrupt-parent = <&r_intc>;
342 /* interrupts get set in SoC specific dtsi file */
343 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
344 clock-names = "apb", "hosc", "losc";
345 gpio-controller;
346 interrupt-controller;
347 #interrupt-cells = <3>;
348 #gpio-cells = <3>;
349
350 i2c0_pins: i2c0-pins {
351 pins = "PH2", "PH3";
352 function = "i2c0";
353 };
354
355 i2c1_pins: i2c1-pins {
356 pins = "PH4", "PH5";
357 function = "i2c1";
358 };
359
360 i2c2_pins: i2c2-pins {
361 pins = "PE12", "PE13";
362 function = "i2c2";
363 };
364
365 lcd_rgb666_pins: lcd-rgb666-pins {
366 pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
367 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
368 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
369 "PD24", "PD25", "PD26", "PD27";
370 function = "lcd0";
371 };
372
373 mmc0_pins: mmc0-pins {
374 pins = "PF0", "PF1", "PF2",
375 "PF3", "PF4", "PF5";
376 function = "mmc0";
377 drive-strength = <30>;
378 bias-pull-up;
379 };
380
381 mmc1_pg_pins: mmc1-pg-pins {
382 pins = "PG0", "PG1", "PG2",
383 "PG3", "PG4", "PG5";
384 function = "mmc1";
385 drive-strength = <30>;
386 bias-pull-up;
387 };
388
389 mmc2_8bit_pins: mmc2-8bit-pins {
390 pins = "PC5", "PC6", "PC8",
391 "PC9", "PC10", "PC11",
392 "PC12", "PC13", "PC14",
393 "PC15", "PC16";
394 function = "mmc2";
395 drive-strength = <30>;
396 bias-pull-up;
397 };
398
399 nand_pins: nand-pins {
400 pins = "PC0", "PC1", "PC2", "PC5",
401 "PC8", "PC9", "PC10", "PC11",
402 "PC12", "PC13", "PC14", "PC15";
403 function = "nand0";
404 };
405
406 nand_cs0_pin: nand-cs0-pin {
407 pins = "PC4";
408 function = "nand0";
409 bias-pull-up;
410 };
411
412 nand_cs1_pin: nand-cs1-pin {
413 pins = "PC3";
414 function = "nand0";
415 bias-pull-up;
416 };
417
418 nand_rb0_pin: nand-rb0-pin {
419 pins = "PC6";
420 function = "nand0";
421 bias-pull-up;
422 };
423
424 nand_rb1_pin: nand-rb1-pin {
425 pins = "PC7";
426 function = "nand0";
427 bias-pull-up;
428 };
429
430 pwm0_pin: pwm0-pin {
431 pins = "PH0";
432 function = "pwm0";
433 };
434
435 uart0_pf_pins: uart0-pf-pins {
436 pins = "PF2", "PF4";
437 function = "uart0";
438 };
439
440 uart1_pg_pins: uart1-pg-pins {
441 pins = "PG6", "PG7";
442 function = "uart1";
443 };
444
445 uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
446 pins = "PG8", "PG9";
447 function = "uart1";
448 };
449 };
450
451 timer@1c20c00 {
452 compatible = "allwinner,sun8i-a23-timer";
453 reg = <0x01c20c00 0xa0>;
454 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
455 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
456 clocks = <&osc24M>;
457 };
458
459 wdt0: watchdog@1c20ca0 {
460 compatible = "allwinner,sun6i-a31-wdt";
461 reg = <0x01c20ca0 0x20>;
462 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
463 clocks = <&osc24M>;
464 };
465
466 pwm: pwm@1c21400 {
467 compatible = "allwinner,sun7i-a20-pwm";
468 reg = <0x01c21400 0xc>;
469 clocks = <&osc24M>;
470 #pwm-cells = <3>;
471 status = "disabled";
472 };
473
474 lradc: lradc@1c22800 {
475 compatible = "allwinner,sun4i-a10-lradc-keys";
476 reg = <0x01c22800 0x100>;
477 interrupt-parent = <&r_intc>;
478 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
479 status = "disabled";
480 };
481
482 uart0: serial@1c28000 {
483 compatible = "snps,dw-apb-uart";
484 reg = <0x01c28000 0x400>;
485 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
486 reg-shift = <2>;
487 reg-io-width = <4>;
488 clocks = <&ccu CLK_BUS_UART0>;
489 resets = <&ccu RST_BUS_UART0>;
490 dmas = <&dma 6>, <&dma 6>;
491 dma-names = "rx", "tx";
492 status = "disabled";
493 };
494
495 uart1: serial@1c28400 {
496 compatible = "snps,dw-apb-uart";
497 reg = <0x01c28400 0x400>;
498 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
499 reg-shift = <2>;
500 reg-io-width = <4>;
501 clocks = <&ccu CLK_BUS_UART1>;
502 resets = <&ccu RST_BUS_UART1>;
503 dmas = <&dma 7>, <&dma 7>;
504 dma-names = "rx", "tx";
505 status = "disabled";
506 };
507
508 uart2: serial@1c28800 {
509 compatible = "snps,dw-apb-uart";
510 reg = <0x01c28800 0x400>;
511 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
512 reg-shift = <2>;
513 reg-io-width = <4>;
514 clocks = <&ccu CLK_BUS_UART2>;
515 resets = <&ccu RST_BUS_UART2>;
516 dmas = <&dma 8>, <&dma 8>;
517 dma-names = "rx", "tx";
518 status = "disabled";
519 };
520
521 uart3: serial@1c28c00 {
522 compatible = "snps,dw-apb-uart";
523 reg = <0x01c28c00 0x400>;
524 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
525 reg-shift = <2>;
526 reg-io-width = <4>;
527 clocks = <&ccu CLK_BUS_UART3>;
528 resets = <&ccu RST_BUS_UART3>;
529 dmas = <&dma 9>, <&dma 9>;
530 dma-names = "rx", "tx";
531 status = "disabled";
532 };
533
534 uart4: serial@1c29000 {
535 compatible = "snps,dw-apb-uart";
536 reg = <0x01c29000 0x400>;
537 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
538 reg-shift = <2>;
539 reg-io-width = <4>;
540 clocks = <&ccu CLK_BUS_UART4>;
541 resets = <&ccu RST_BUS_UART4>;
542 dmas = <&dma 10>, <&dma 10>;
543 dma-names = "rx", "tx";
544 status = "disabled";
545 };
546
547 i2c0: i2c@1c2ac00 {
548 compatible = "allwinner,sun6i-a31-i2c";
549 reg = <0x01c2ac00 0x400>;
550 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
551 clocks = <&ccu CLK_BUS_I2C0>;
552 resets = <&ccu RST_BUS_I2C0>;
553 pinctrl-names = "default";
554 pinctrl-0 = <&i2c0_pins>;
555 status = "disabled";
556 #address-cells = <1>;
557 #size-cells = <0>;
558 };
559
560 i2c1: i2c@1c2b000 {
561 compatible = "allwinner,sun6i-a31-i2c";
562 reg = <0x01c2b000 0x400>;
563 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
564 clocks = <&ccu CLK_BUS_I2C1>;
565 resets = <&ccu RST_BUS_I2C1>;
566 pinctrl-names = "default";
567 pinctrl-0 = <&i2c1_pins>;
568 status = "disabled";
569 #address-cells = <1>;
570 #size-cells = <0>;
571 };
572
573 i2c2: i2c@1c2b400 {
574 compatible = "allwinner,sun6i-a31-i2c";
575 reg = <0x01c2b400 0x400>;
576 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
577 clocks = <&ccu CLK_BUS_I2C2>;
578 resets = <&ccu RST_BUS_I2C2>;
579 pinctrl-names = "default";
580 pinctrl-0 = <&i2c2_pins>;
581 status = "disabled";
582 #address-cells = <1>;
583 #size-cells = <0>;
584 };
585
586 mali: gpu@1c40000 {
587 compatible = "allwinner,sun8i-a23-mali",
588 "allwinner,sun7i-a20-mali", "arm,mali-400";
589 reg = <0x01c40000 0x10000>;
590 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
591 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
593 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
594 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
595 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
596 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
597 interrupt-names = "gp",
598 "gpmmu",
599 "pp0",
600 "ppmmu0",
601 "pp1",
602 "ppmmu1",
603 "pmu";
604 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
605 clock-names = "bus", "core";
606 resets = <&ccu RST_BUS_GPU>;
607 #cooling-cells = <2>;
608
609 assigned-clocks = <&ccu CLK_GPU>;
610 assigned-clock-rates = <384000000>;
611 };
612
613 gic: interrupt-controller@1c81000 {
614 compatible = "arm,gic-400";
615 reg = <0x01c81000 0x1000>,
616 <0x01c82000 0x2000>,
617 <0x01c84000 0x2000>,
618 <0x01c86000 0x2000>;
619 interrupt-controller;
620 #interrupt-cells = <3>;
621 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
622 };
623
624 fe0: display-frontend@1e00000 {
625 /* compatible gets set in SoC specific dtsi file */
626 reg = <0x01e00000 0x20000>;
627 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
628 clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
629 <&ccu CLK_DRAM_DE_FE>;
630 clock-names = "ahb", "mod",
631 "ram";
632 resets = <&ccu RST_BUS_DE_FE>;
633
634 ports {
635 #address-cells = <1>;
636 #size-cells = <0>;
637
638 fe0_out: port@1 {
639 reg = <1>;
640
641 fe0_out_be0: endpoint {
642 remote-endpoint = <&be0_in_fe0>;
643 };
644 };
645 };
646 };
647
648 be0: display-backend@1e60000 {
649 /* compatible gets set in SoC specific dtsi file */
650 reg = <0x01e60000 0x10000>;
651 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
652 clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
653 <&ccu CLK_DRAM_DE_BE>;
654 clock-names = "ahb", "mod",
655 "ram";
656 resets = <&ccu RST_BUS_DE_BE>;
657
658 ports {
659 #address-cells = <1>;
660 #size-cells = <0>;
661
662 be0_in: port@0 {
663 reg = <0>;
664
665 be0_in_fe0: endpoint {
666 remote-endpoint = <&fe0_out_be0>;
667 };
668 };
669
670 be0_out: port@1 {
671 reg = <1>;
672
673 be0_out_drc0: endpoint {
674 remote-endpoint = <&drc0_in_be0>;
675 };
676 };
677 };
678 };
679
680 drc0: drc@1e70000 {
681 /* compatible gets set in SoC specific dtsi file */
682 reg = <0x01e70000 0x10000>;
683 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
684 clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
685 <&ccu CLK_DRAM_DRC>;
686 clock-names = "ahb", "mod", "ram";
687 resets = <&ccu RST_BUS_DRC>;
688
689 ports {
690 #address-cells = <1>;
691 #size-cells = <0>;
692
693 drc0_in: port@0 {
694 reg = <0>;
695
696 drc0_in_be0: endpoint {
697 remote-endpoint = <&be0_out_drc0>;
698 };
699 };
700
701 drc0_out: port@1 {
702 reg = <1>;
703
704 drc0_out_tcon0: endpoint {
705 remote-endpoint = <&tcon0_in_drc0>;
706 };
707 };
708 };
709 };
710
711 rtc: rtc@1f00000 {
712 compatible = "allwinner,sun8i-a23-rtc";
713 reg = <0x01f00000 0x400>;
714 interrupt-parent = <&r_intc>;
715 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
716 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
717 clock-output-names = "osc32k", "osc32k-out";
718 clocks = <&ext_osc32k>;
719 #clock-cells = <1>;
720 };
721
722 r_intc: interrupt-controller@1f00c00 {
723 compatible = "allwinner,sun6i-a31-r-intc";
724 interrupt-controller;
725 #interrupt-cells = <3>;
726 reg = <0x01f00c00 0x400>;
727 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
728 };
729
730 prcm@1f01400 {
731 compatible = "allwinner,sun8i-a23-prcm";
732 reg = <0x01f01400 0x200>;
733
734 ar100: ar100_clk {
735 compatible = "fixed-factor-clock";
736 #clock-cells = <0>;
737 clock-div = <1>;
738 clock-mult = <1>;
739 clocks = <&osc24M>;
740 clock-output-names = "ar100";
741 };
742
743 ahb0: ahb0_clk {
744 compatible = "fixed-factor-clock";
745 #clock-cells = <0>;
746 clock-div = <1>;
747 clock-mult = <1>;
748 clocks = <&ar100>;
749 clock-output-names = "ahb0";
750 };
751
752 apb0: apb0_clk {
753 compatible = "allwinner,sun8i-a23-apb0-clk";
754 #clock-cells = <0>;
755 clocks = <&ahb0>;
756 clock-output-names = "apb0";
757 };
758
759 apb0_gates: apb0_gates_clk {
760 compatible = "allwinner,sun8i-a23-apb0-gates-clk";
761 #clock-cells = <1>;
762 clocks = <&apb0>;
763 clock-output-names = "apb0_pio", "apb0_timer",
764 "apb0_rsb", "apb0_uart",
765 "apb0_i2c";
766 };
767
768 apb0_rst: apb0_rst {
769 compatible = "allwinner,sun6i-a31-clock-reset";
770 #reset-cells = <1>;
771 };
772
773 codec_analog: codec-analog {
774 compatible = "allwinner,sun8i-a23-codec-analog";
775 };
776 };
777
778 cpucfg@1f01c00 {
779 compatible = "allwinner,sun8i-a23-cpuconfig";
780 reg = <0x01f01c00 0x300>;
781 };
782
783 r_uart: serial@1f02800 {
784 compatible = "snps,dw-apb-uart";
785 reg = <0x01f02800 0x400>;
786 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
787 reg-shift = <2>;
788 reg-io-width = <4>;
789 clocks = <&apb0_gates 4>;
790 resets = <&apb0_rst 4>;
791 status = "disabled";
792 };
793
794 r_i2c: i2c@1f02400 {
795 compatible = "allwinner,sun8i-a23-i2c",
796 "allwinner,sun6i-a31-i2c";
797 reg = <0x01f02400 0x400>;
798 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
799 pinctrl-names = "default";
800 pinctrl-0 = <&r_i2c_pins>;
801 clocks = <&apb0_gates 6>;
802 resets = <&apb0_rst 6>;
803 status = "disabled";
804 #address-cells = <1>;
805 #size-cells = <0>;
806 };
807
808 r_pio: pinctrl@1f02c00 {
809 compatible = "allwinner,sun8i-a23-r-pinctrl";
810 reg = <0x01f02c00 0x400>;
811 interrupt-parent = <&r_intc>;
812 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
813 clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
814 clock-names = "apb", "hosc", "losc";
815 resets = <&apb0_rst 0>;
816 gpio-controller;
817 interrupt-controller;
818 #interrupt-cells = <3>;
819 #gpio-cells = <3>;
820
821 r_i2c_pins: r-i2c-pins {
822 pins = "PL0", "PL1";
823 function = "s_i2c";
824 bias-pull-up;
825 };
826
827 r_rsb_pins: r-rsb-pins {
828 pins = "PL0", "PL1";
829 function = "s_rsb";
830 drive-strength = <20>;
831 bias-pull-up;
832 };
833
834 r_uart_pins_a: r-uart-pins {
835 pins = "PL2", "PL3";
836 function = "s_uart";
837 };
838 };
839
840 r_rsb: rsb@1f03400 {
841 compatible = "allwinner,sun8i-a23-rsb";
842 reg = <0x01f03400 0x400>;
843 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
844 clocks = <&apb0_gates 3>;
845 clock-frequency = <3000000>;
846 resets = <&apb0_rst 3>;
847 pinctrl-names = "default";
848 pinctrl-0 = <&r_rsb_pins>;
849 status = "disabled";
850 #address-cells = <1>;
851 #size-cells = <0>;
852 };
853 };
854};