Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-msm8974.dtsi"
3#include "qcom-pm8841.dtsi"
4#include "qcom-pm8941.dtsi"
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/input/input.h>
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9/ {
10 model = "LGE MSM 8974 HAMMERHEAD";
11 compatible = "lge,hammerhead", "qcom,msm8974";
12
13 aliases {
14 serial0 = &blsp1_uart1;
15 serial1 = &blsp2_uart10;
16 };
17
18 chosen {
19 stdout-path = "serial0:115200n8";
20 };
21
22 smd {
23 rpm {
24 rpm_requests {
25 pm8841-regulators {
26 s1 {
27 regulator-min-microvolt = <675000>;
28 regulator-max-microvolt = <1050000>;
29 };
30
31 s2 {
32 regulator-min-microvolt = <500000>;
33 regulator-max-microvolt = <1050000>;
34 };
35
36 s3 {
37 regulator-min-microvolt = <1050000>;
38 regulator-max-microvolt = <1050000>;
39 };
40
41 s4 {
42 regulator-min-microvolt = <815000>;
43 regulator-max-microvolt = <900000>;
44 };
45 };
46
47 pm8941-regulators {
48 vdd_l1_l3-supply = <&pm8941_s1>;
49 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
50 vdd_l4_l11-supply = <&pm8941_s1>;
51 vdd_l5_l7-supply = <&pm8941_s2>;
52 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
53 vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
54 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
55 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
56 vdd_l21-supply = <&vreg_boost>;
57
58 s1 {
59 regulator-min-microvolt = <1300000>;
60 regulator-max-microvolt = <1300000>;
61
62 regulator-always-on;
63 regulator-boot-on;
64 };
65
66 s2 {
67 regulator-min-microvolt = <2150000>;
68 regulator-max-microvolt = <2150000>;
69
70 regulator-boot-on;
71 };
72
73 s3 {
74 regulator-min-microvolt = <1800000>;
75 regulator-max-microvolt = <1800000>;
76
77 regulator-always-on;
78 regulator-boot-on;
79 };
80
81 l1 {
82 regulator-min-microvolt = <1225000>;
83 regulator-max-microvolt = <1225000>;
84
85 regulator-always-on;
86 regulator-boot-on;
87 };
88
89 l2 {
90 regulator-min-microvolt = <1200000>;
91 regulator-max-microvolt = <1200000>;
92 };
93
94 l3 {
95 regulator-min-microvolt = <1225000>;
96 regulator-max-microvolt = <1225000>;
97 };
98
99 l4 {
100 regulator-min-microvolt = <1225000>;
101 regulator-max-microvolt = <1225000>;
102 };
103
104 l5 {
105 regulator-min-microvolt = <1800000>;
106 regulator-max-microvolt = <1800000>;
107 };
108
109 l6 {
110 regulator-min-microvolt = <1800000>;
111 regulator-max-microvolt = <1800000>;
112
113 regulator-boot-on;
114 };
115
116 l7 {
117 regulator-min-microvolt = <1800000>;
118 regulator-max-microvolt = <1800000>;
119
120 regulator-boot-on;
121 };
122
123 l8 {
124 regulator-min-microvolt = <1800000>;
125 regulator-max-microvolt = <1800000>;
126 };
127
128 l9 {
129 regulator-min-microvolt = <1800000>;
130 regulator-max-microvolt = <2950000>;
131 };
132
133 l10 {
134 regulator-min-microvolt = <1800000>;
135 regulator-max-microvolt = <2950000>;
136 };
137
138 l11 {
139 regulator-min-microvolt = <1300000>;
140 regulator-max-microvolt = <1300000>;
141 };
142
143 l12 {
144 regulator-min-microvolt = <1800000>;
145 regulator-max-microvolt = <1800000>;
146
147 regulator-always-on;
148 regulator-boot-on;
149 };
150
151 l13 {
152 regulator-min-microvolt = <1800000>;
153 regulator-max-microvolt = <2950000>;
154
155 regulator-boot-on;
156 };
157
158 l14 {
159 regulator-min-microvolt = <1800000>;
160 regulator-max-microvolt = <1800000>;
161 };
162
163 l15 {
164 regulator-min-microvolt = <2050000>;
165 regulator-max-microvolt = <2050000>;
166 };
167
168 l16 {
169 regulator-min-microvolt = <2700000>;
170 regulator-max-microvolt = <2700000>;
171 };
172
173 l17 {
174 regulator-min-microvolt = <2850000>;
175 regulator-max-microvolt = <2850000>;
176 };
177
178 l18 {
179 regulator-min-microvolt = <2850000>;
180 regulator-max-microvolt = <2850000>;
181 };
182
183 l19 {
184 regulator-min-microvolt = <3000000>;
185 regulator-max-microvolt = <3300000>;
186 };
187
188 l20 {
189 regulator-min-microvolt = <2950000>;
190 regulator-max-microvolt = <2950000>;
191
192 regulator-boot-on;
193 regulator-system-load = <200000>;
194 regulator-allow-set-load;
195 };
196
197 l21 {
198 regulator-min-microvolt = <2950000>;
199 regulator-max-microvolt = <2950000>;
200
201 regulator-boot-on;
202 };
203
204 l22 {
205 regulator-min-microvolt = <3000000>;
206 regulator-max-microvolt = <3300000>;
207 };
208
209 l23 {
210 regulator-min-microvolt = <3000000>;
211 regulator-max-microvolt = <3000000>;
212 };
213
214 l24 {
215 regulator-min-microvolt = <3075000>;
216 regulator-max-microvolt = <3075000>;
217
218 regulator-boot-on;
219 };
220 };
221 };
222 };
223 };
224
225 vreg_wlan: wlan-regulator {
226 compatible = "regulator-fixed";
227
228 regulator-name = "wl-reg";
229 regulator-min-microvolt = <3300000>;
230 regulator-max-microvolt = <3300000>;
231
232 gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
233 enable-active-high;
234
235 pinctrl-names = "default";
236 pinctrl-0 = <&wlan_regulator_pin>;
237 };
238};
239
240&soc {
241 serial@f991d000 {
242 status = "okay";
243 };
244
245 pinctrl@fd510000 {
246 sdhc1_pin_a: sdhc1-pin-active {
247 clk {
248 pins = "sdc1_clk";
249 drive-strength = <16>;
250 bias-disable;
251 };
252
253 cmd-data {
254 pins = "sdc1_cmd", "sdc1_data";
255 drive-strength = <10>;
256 bias-pull-up;
257 };
258 };
259
260 sdhc2_pin_a: sdhc2-pin-active {
261 clk {
262 pins = "sdc2_clk";
263 drive-strength = <6>;
264 bias-disable;
265 };
266
267 cmd-data {
268 pins = "sdc2_cmd", "sdc2_data";
269 drive-strength = <6>;
270 bias-pull-up;
271 };
272 };
273
274 i2c1_pins: i2c1 {
275 mux {
276 pins = "gpio2", "gpio3";
277 function = "blsp_i2c1";
278
279 drive-strength = <2>;
280 bias-disable;
281 };
282 };
283
284 i2c2_pins: i2c2 {
285 mux {
286 pins = "gpio6", "gpio7";
287 function = "blsp_i2c2";
288
289 drive-strength = <2>;
290 bias-disable;
291 };
292 };
293
294 i2c3_pins: i2c3 {
295 mux {
296 pins = "gpio10", "gpio11";
297 function = "blsp_i2c3";
298 drive-strength = <2>;
299 bias-disable;
300 };
301 };
302
303 i2c11_pins: i2c11 {
304 mux {
305 pins = "gpio83", "gpio84";
306 function = "blsp_i2c11";
307
308 drive-strength = <2>;
309 bias-disable;
310 };
311 };
312
313 i2c12_pins: i2c12 {
314 mux {
315 pins = "gpio87", "gpio88";
316 function = "blsp_i2c12";
317 drive-strength = <2>;
318 bias-disable;
319 };
320 };
321
322 mpu6515_pin: mpu6515 {
323 irq {
324 pins = "gpio73";
325 function = "gpio";
326 bias-disable;
327 input-enable;
328 };
329 };
330
331 touch_pin: touch {
332 int {
333 pins = "gpio5";
334 function = "gpio";
335
336 drive-strength = <2>;
337 bias-disable;
338 input-enable;
339 };
340
341 reset {
342 pins = "gpio8";
343 function = "gpio";
344
345 drive-strength = <2>;
346 bias-pull-up;
347 };
348 };
349
350 panel_pin: panel {
351 te {
352 pins = "gpio12";
353 function = "mdp_vsync";
354
355 drive-strength = <2>;
356 bias-disable;
357 };
358 };
359
360 bt_pin: bt {
361 hostwake {
362 pins = "gpio42";
363 function = "gpio";
364 };
365
366 devwake {
367 pins = "gpio62";
368 function = "gpio";
369 };
370
371 shutdown {
372 pins = "gpio41";
373 function = "gpio";
374 };
375 };
376
377 blsp2_uart10_pin_a: blsp2-uart10-pin-active {
378 tx {
379 pins = "gpio53";
380 function = "blsp_uart10";
381
382 drive-strength = <2>;
383 bias-disable;
384 };
385
386 rx {
387 pins = "gpio54";
388 function = "blsp_uart10";
389
390 drive-strength = <2>;
391 bias-pull-up;
392 };
393
394 cts {
395 pins = "gpio55";
396 function = "blsp_uart10";
397
398 drive-strength = <2>;
399 bias-pull-up;
400 };
401
402 rts {
403 pins = "gpio56";
404 function = "blsp_uart10";
405
406 drive-strength = <2>;
407 bias-disable;
408 };
409 };
410 };
411
412 sdhci@f9824900 {
413 status = "okay";
414
415 vmmc-supply = <&pm8941_l20>;
416 vqmmc-supply = <&pm8941_s3>;
417
418 bus-width = <8>;
419 non-removable;
420
421 pinctrl-names = "default";
422 pinctrl-0 = <&sdhc1_pin_a>;
423 };
424
425 sdhci@f98a4900 {
426 status = "okay";
427
428 max-frequency = <100000000>;
429 bus-width = <4>;
430 non-removable;
431 vmmc-supply = <&vreg_wlan>;
432 vqmmc-supply = <&pm8941_s3>;
433
434 pinctrl-names = "default";
435 pinctrl-0 = <&sdhc2_pin_a>;
436
437 #address-cells = <1>;
438 #size-cells = <0>;
439
440 bcrmf@1 {
441 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
442 reg = <1>;
443
444 brcm,drive-strength = <10>;
445
446 pinctrl-names = "default";
447 pinctrl-0 = <&wlan_sleep_clk_pin>;
448 };
449 };
450
451 gpio-keys {
452 compatible = "gpio-keys";
453 input-name = "gpio-keys";
454
455 pinctrl-names = "default";
456 pinctrl-0 = <&gpio_keys_pin_a>;
457
458 volume-up {
459 label = "volume_up";
460 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
461 linux,input-type = <1>;
462 linux,code = <KEY_VOLUMEUP>;
463 };
464
465 volume-down {
466 label = "volume_down";
467 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
468 linux,input-type = <1>;
469 linux,code = <KEY_VOLUMEDOWN>;
470 };
471 };
472
473 serial@f9960000 {
474 status = "okay";
475
476 pinctrl-names = "default";
477 pinctrl-0 = <&blsp2_uart10_pin_a>;
478
479 bluetooth {
480 compatible = "brcm,bcm43438-bt";
481 max-speed = <3000000>;
482
483 pinctrl-names = "default";
484 pinctrl-0 = <&bt_pin>;
485
486 host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
487 device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
488 shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
489 };
490 };
491
492 i2c@f9967000 {
493 status = "okay";
494 pinctrl-names = "default";
495 pinctrl-0 = <&i2c11_pins>;
496 clock-frequency = <355000>;
497 qcom,src-freq = <50000000>;
498
499 led-controller@38 {
500 compatible = "ti,lm3630a";
501 status = "okay";
502 reg = <0x38>;
503
504 #address-cells = <1>;
505 #size-cells = <0>;
506
507 led@0 {
508 reg = <0>;
509 led-sources = <0 1>;
510 label = "lcd-backlight";
511 default-brightness = <200>;
512 };
513 };
514 };
515
516 i2c@f9968000 {
517 status = "okay";
518 pinctrl-names = "default";
519 pinctrl-0 = <&i2c12_pins>;
520 clock-frequency = <100000>;
521 qcom,src-freq = <50000000>;
522
523 mpu6515@68 {
524 compatible = "invensense,mpu6515";
525 reg = <0x68>;
526 interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
527 vddio-supply = <&pm8941_lvs1>;
528
529 pinctrl-names = "default";
530 pinctrl-0 = <&mpu6515_pin>;
531
532 mount-matrix = "0", "-1", "0",
533 "-1", "0", "0",
534 "0", "0", "1";
535
536 i2c-gate {
537 #address-cells = <1>;
538 #size-cells = <0>;
539 ak8963@f {
540 compatible = "asahi-kasei,ak8963";
541 reg = <0x0f>;
542 gpios = <&msmgpio 67 0>;
543 vid-supply = <&pm8941_lvs1>;
544 vdd-supply = <&pm8941_l17>;
545 };
546
547 bmp280@76 {
548 compatible = "bosch,bmp280";
549 reg = <0x76>;
550 vdda-supply = <&pm8941_lvs1>;
551 vddd-supply = <&pm8941_l17>;
552 };
553 };
554 };
555 };
556
557 i2c@f9923000 {
558 status = "okay";
559 pinctrl-names = "default";
560 pinctrl-0 = <&i2c1_pins>;
561 clock-frequency = <100000>;
562 qcom,src-freq = <50000000>;
563
564 charger: bq24192@6b {
565 compatible = "ti,bq24192";
566 reg = <0x6b>;
567 interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
568
569 omit-battery-class;
570
571 usb_otg_vbus: usb-otg-vbus { };
572 };
573
574 fuelgauge: max17048@36 {
575 compatible = "maxim,max17048";
576 reg = <0x36>;
577
578 maxim,double-soc;
579 maxim,rcomp = /bits/ 8 <0x4d>;
580
581 interrupt-parent = <&msmgpio>;
582 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
583
584 pinctrl-names = "default";
585 pinctrl-0 = <&fuelgauge_pin>;
586
587 maxim,alert-low-soc-level = <2>;
588 };
589 };
590
591 i2c@f9924000 {
592 status = "okay";
593
594 clock-frequency = <355000>;
595 qcom,src-freq = <50000000>;
596
597 pinctrl-names = "default";
598 pinctrl-0 = <&i2c2_pins>;
599
600 synaptics@70 {
601 compatible = "syna,rmi4-i2c";
602 reg = <0x70>;
603
604 interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
605 vdd-supply = <&pm8941_l22>;
606 vio-supply = <&pm8941_lvs3>;
607
608 pinctrl-names = "default";
609 pinctrl-0 = <&touch_pin>;
610
611 #address-cells = <1>;
612 #size-cells = <0>;
613
614 rmi4-f01@1 {
615 reg = <0x1>;
616 syna,nosleep-mode = <1>;
617 };
618
619 rmi4-f12@12 {
620 reg = <0x12>;
621 syna,sensor-type = <1>;
622 };
623 };
624 };
625
626 i2c@f9925000 {
627 status = "okay";
628 pinctrl-names = "default";
629 pinctrl-0 = <&i2c3_pins>;
630 clock-frequency = <100000>;
631 qcom,src-freq = <50000000>;
632
633 avago_apds993@39 {
634 compatible = "avago,apds9930";
635 reg = <0x39>;
636 interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
637 vdd-supply = <&pm8941_l17>;
638 vddio-supply = <&pm8941_lvs1>;
639 led-max-microamp = <100000>;
640 amstaos,proximity-diodes = <0>;
641 };
642 };
643
644 usb@f9a55000 {
645 status = "okay";
646
647 phys = <&usb_hs1_phy>;
648 phy-select = <&tcsr 0xb000 0>;
649
650 extcon = <&charger>, <&usb_id>;
651 vbus-supply = <&usb_otg_vbus>;
652
653 hnp-disable;
654 srp-disable;
655 adp-disable;
656
657 ulpi {
658 phy@a {
659 status = "okay";
660
661 v1p8-supply = <&pm8941_l6>;
662 v3p3-supply = <&pm8941_l24>;
663
664 qcom,init-seq = /bits/ 8 <0x1 0x64>;
665 };
666 };
667 };
668
669 mdss@fd900000 {
670 status = "okay";
671
672 mdp@fd900000 {
673 status = "okay";
674 };
675
676 dsi@fd922800 {
677 status = "okay";
678
679 vdda-supply = <&pm8941_l2>;
680 vdd-supply = <&pm8941_lvs3>;
681 vddio-supply = <&pm8941_l12>;
682
683 #address-cells = <1>;
684 #size-cells = <0>;
685
686 ports {
687 port@1 {
688 endpoint {
689 remote-endpoint = <&panel_in>;
690 data-lanes = <0 1 2 3>;
691 };
692 };
693 };
694
695 panel: panel@0 {
696 reg = <0>;
697 compatible = "lg,acx467akm-7";
698
699 pinctrl-names = "default";
700 pinctrl-0 = <&panel_pin>;
701
702 port {
703 panel_in: endpoint {
704 remote-endpoint = <&dsi0_out>;
705 };
706 };
707 };
708 };
709
710 dsi-phy@fd922a00 {
711 status = "okay";
712
713 vddio-supply = <&pm8941_l12>;
714 };
715 };
716};
717
718&spmi_bus {
719 pm8941@0 {
720 gpios@c000 {
721 gpio_keys_pin_a: gpio-keys-active {
722 pins = "gpio2", "gpio3";
723 function = "normal";
724
725 bias-pull-up;
726 power-source = <PM8941_GPIO_S3>;
727 };
728
729 fuelgauge_pin: fuelgauge-int {
730 pins = "gpio9";
731 function = "normal";
732
733 bias-disable;
734 input-enable;
735 power-source = <PM8941_GPIO_S3>;
736 };
737
738 wlan_sleep_clk_pin: wl-sleep-clk {
739 pins = "gpio16";
740 function = "func2";
741
742 output-high;
743 power-source = <PM8941_GPIO_S3>;
744 };
745
746 wlan_regulator_pin: wl-reg-active {
747 pins = "gpio17";
748 function = "normal";
749
750 bias-disable;
751 power-source = <PM8941_GPIO_S3>;
752 };
753
754 otg {
755 gpio-hog;
756 gpios = <35 GPIO_ACTIVE_HIGH>;
757 output-high;
758 line-name = "otg-gpio";
759 };
760 };
761 };
762};