Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos4412 based Trats 2 board device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 *
8 * Device tree source file for Samsung's Trats 2 board which is based on
9 * Samsung's Exynos4412 SoC.
10 */
11
12/dts-v1/;
13#include "exynos4412.dtsi"
14#include "exynos4412-ppmu-common.dtsi"
15#include <dt-bindings/gpio/gpio.h>
16#include <dt-bindings/input/input.h>
17#include <dt-bindings/interrupt-controller/irq.h>
18#include <dt-bindings/clock/maxim,max77686.h>
19#include <dt-bindings/pinctrl/samsung.h>
20
21/ {
22 compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
23
24 aliases {
25 i2c11 = &i2c_max77693;
26 i2c12 = &i2c_max77693_fuel;
27 };
28
29 chosen {
30 stdout-path = &serial_2;
31 };
32
33 firmware@204f000 {
34 compatible = "samsung,secure-firmware";
35 reg = <0x0204F000 0x1000>;
36 };
37
38 fixed-rate-clocks {
39 xxti {
40 compatible = "samsung,clock-xxti";
41 clock-frequency = <0>;
42 };
43
44 xusbxti {
45 compatible = "samsung,clock-xusbxti";
46 clock-frequency = <24000000>;
47 };
48 };
49
50 cam_io_reg: voltage-regulator-1 {
51 compatible = "regulator-fixed";
52 regulator-name = "CAM_SENSOR_A";
53 regulator-min-microvolt = <2800000>;
54 regulator-max-microvolt = <2800000>;
55 enable-active-high;
56 status = "disabled";
57 };
58
59 cam_af_reg: voltage-regulator-2 {
60 compatible = "regulator-fixed";
61 regulator-name = "CAM_AF";
62 regulator-min-microvolt = <2800000>;
63 regulator-max-microvolt = <2800000>;
64 enable-active-high;
65 status = "disabled";
66 };
67
68 vsil12: voltage-regulator-3 {
69 compatible = "regulator-fixed";
70 regulator-name = "VSIL_1.2V";
71 regulator-min-microvolt = <1200000>;
72 regulator-max-microvolt = <1200000>;
73 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
74 enable-active-high;
75 vin-supply = <&buck7_reg>;
76 };
77
78 vcc33mhl: voltage-regulator-4 {
79 compatible = "regulator-fixed";
80 regulator-name = "VCC_3.3_MHL";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
83 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
84 enable-active-high;
85 };
86
87 vcc18mhl: voltage-regulator-5 {
88 compatible = "regulator-fixed";
89 regulator-name = "VCC_1.8_MHL";
90 regulator-min-microvolt = <1800000>;
91 regulator-max-microvolt = <1800000>;
92 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
93 enable-active-high;
94 };
95
96 touchkey_reg: voltage-regulator-6 {
97 compatible = "regulator-fixed";
98 regulator-name = "LED_VDD_3.3V";
99 regulator-min-microvolt = <3300000>;
100 regulator-max-microvolt = <3300000>;
101 enable-active-high;
102 status = "disabled";
103 };
104
105 vbatt_reg: voltage-regulator-7 {
106 compatible = "regulator-fixed";
107 regulator-name = "VBATT";
108 regulator-min-microvolt = <5000000>;
109 regulator-max-microvolt = <5000000>;
110 regulator-always-on;
111 };
112
113 mic_bias_reg: voltage-regulator-8 {
114 compatible = "regulator-fixed";
115 regulator-name = "MICBIAS_LDO_2.8V";
116 regulator-min-microvolt = <2800000>;
117 regulator-max-microvolt = <2800000>;
118 gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
119 enable-active-high;
120 };
121
122 submic_bias_reg: voltage-regulator-9 {
123 compatible = "regulator-fixed";
124 regulator-name = "SUB_MICBIAS_LDO_2.8V";
125 regulator-min-microvolt = <2800000>;
126 regulator-max-microvolt = <2800000>;
127 };
128
129 gpio-keys {
130 compatible = "gpio-keys";
131 pinctrl-names = "default";
132 pinctrl-0 = <&gpio_keys>;
133
134 key-down {
135 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
136 linux,code = <114>;
137 label = "volume down";
138 debounce-interval = <10>;
139 };
140
141 key-up {
142 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
143 linux,code = <115>;
144 label = "volume up";
145 debounce-interval = <10>;
146 };
147
148 key-power {
149 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
150 linux,code = <116>;
151 label = "power";
152 debounce-interval = <10>;
153 wakeup-source;
154 };
155
156 key-ok {
157 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
158 linux,code = <139>;
159 label = "ok";
160 debounce-interval = <10>;
161 wakeup-source;
162 };
163 };
164
165 i2c_max77693: i2c-gpio-1 {
166 compatible = "i2c-gpio";
167 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
168 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
169 i2c-gpio,delay-us = <2>;
170 #address-cells = <1>;
171 #size-cells = <0>;
172
173 pmic@66 {
174 compatible = "maxim,max77693";
175 interrupt-parent = <&gpx1>;
176 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&max77693_irq>;
179 reg = <0x66>;
180
181 regulators {
182 esafeout1_reg: ESAFEOUT1 {
183 regulator-name = "ESAFEOUT1";
184 };
185 esafeout2_reg: ESAFEOUT2 {
186 regulator-name = "ESAFEOUT2";
187 };
188 charger_reg: CHARGER {
189 regulator-name = "CHARGER";
190 regulator-min-microamp = <60000>;
191 regulator-max-microamp = <2580000>;
192 };
193 };
194
195 motor-driver {
196 compatible = "maxim,max77693-haptic";
197 haptic-supply = <&ldo26_reg>;
198 pwms = <&pwm 0 38022 0>;
199 };
200
201 charger {
202 compatible = "maxim,max77693-charger";
203
204 maxim,constant-microvolt = <4350000>;
205 maxim,min-system-microvolt = <3600000>;
206 maxim,thermal-regulation-celsius = <100>;
207 maxim,battery-overcurrent-microamp = <3500000>;
208 maxim,charge-input-threshold-microvolt = <4300000>;
209 };
210 };
211 };
212
213 i2c_max77693_fuel: i2c-gpio-3 {
214 compatible = "i2c-gpio";
215 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
216 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
217 i2c-gpio,delay-us = <2>;
218 #address-cells = <1>;
219 #size-cells = <0>;
220
221 fuel-gauge@36 {
222 compatible = "maxim,max17047";
223 interrupt-parent = <&gpx2>;
224 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&max77693_fuel_irq>;
227 reg = <0x36>;
228
229 maxim,over-heat-temp = <700>;
230 maxim,over-volt = <4500>;
231 };
232 };
233
234 i2c-gpio-4 {
235 compatible = "i2c-gpio";
236 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
237 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
238 i2c-gpio,delay-us = <2>;
239 #address-cells = <1>;
240 #size-cells = <0>;
241
242 touchkey@20 {
243 compatible = "cypress,midas-touchkey";
244 reg = <0x20>;
245 vdd-supply = <&touchkey_reg>;
246 vcc-supply = <&ldo5_reg>;
247 interrupt-parent = <&gpj0>;
248 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
249 linux,keycodes = <KEY_BACK KEY_MENU>;
250 };
251 };
252
253 i2c-mhl {
254 compatible = "i2c-gpio";
255 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
256 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
257 i2c-gpio,delay-us = <100>;
258 #address-cells = <1>;
259 #size-cells = <0>;
260
261 pinctrl-0 = <&i2c_mhl_bus>;
262 pinctrl-names = "default";
263
264 sii9234: hdmi-bridge@39 {
265 compatible = "sil,sii9234";
266 avcc33-supply = <&vcc33mhl>;
267 iovcc18-supply = <&vcc18mhl>;
268 avcc12-supply = <&vsil12>;
269 cvcc12-supply = <&vsil12>;
270 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
271 interrupt-parent = <&gpf3>;
272 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
273 reg = <0x39>;
274
275 port {
276 mhl_to_hdmi: endpoint {
277 remote-endpoint = <&hdmi_to_mhl>;
278 };
279 };
280 };
281 };
282
283 wlan_pwrseq: sdhci3-pwrseq {
284 compatible = "mmc-pwrseq-simple";
285 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
286 clocks = <&max77686 MAX77686_CLK_PMIC>;
287 clock-names = "ext_clock";
288 };
289
290 sound: sound {
291 compatible = "samsung,midas-audio";
292 model = "Midas";
293 mic-bias-supply = <&mic_bias_reg>;
294 submic-bias-supply = <&submic_bias_reg>;
295
296 cpu {
297 sound-dai = <&i2s0 0>;
298 };
299 codec {
300 sound-dai = <&wm1811>;
301 };
302 };
303
304 thermistor-ap {
305 compatible = "murata,ncp15wb473";
306 pullup-uv = <1800000>; /* VCC_1.8V_AP */
307 pullup-ohm = <100000>; /* 100K */
308 pulldown-ohm = <100000>; /* 100K */
309 io-channels = <&adc 1>; /* AP temperature */
310 };
311
312 thermistor-battery {
313 compatible = "murata,ncp15wb473";
314 pullup-uv = <1800000>; /* VCC_1.8V_AP */
315 pullup-ohm = <100000>; /* 100K */
316 pulldown-ohm = <100000>; /* 100K */
317 io-channels = <&adc 2>; /* Battery temperature */
318 };
319};
320
321&adc {
322 vdd-supply = <&ldo3_reg>;
323 status = "okay";
324};
325
326&bus_dmc {
327 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
328 vdd-supply = <&buck1_reg>;
329 status = "okay";
330};
331
332&bus_acp {
333 devfreq = <&bus_dmc>;
334 status = "okay";
335};
336
337&bus_c2c {
338 devfreq = <&bus_dmc>;
339 status = "okay";
340};
341
342&bus_leftbus {
343 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
344 vdd-supply = <&buck3_reg>;
345 status = "okay";
346};
347
348&bus_rightbus {
349 devfreq = <&bus_leftbus>;
350 status = "okay";
351};
352
353&bus_display {
354 devfreq = <&bus_leftbus>;
355 status = "okay";
356};
357
358&bus_fsys {
359 devfreq = <&bus_leftbus>;
360 status = "okay";
361};
362
363&bus_peri {
364 devfreq = <&bus_leftbus>;
365 status = "okay";
366};
367
368&bus_mfc {
369 devfreq = <&bus_leftbus>;
370 status = "okay";
371};
372
373&camera {
374 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
375 pinctrl-names = "default";
376 status = "okay";
377 assigned-clocks = <&clock CLK_MOUT_CAM0>,
378 <&clock CLK_MOUT_CAM1>;
379 assigned-clock-parents = <&clock CLK_XUSBXTI>,
380 <&clock CLK_XUSBXTI>;
381};
382
383&cpu0 {
384 cpu0-supply = <&buck2_reg>;
385};
386
387&cpu_thermal {
388 cooling-maps {
389 map0 {
390 /* Corresponds to 800MHz at freq_table */
391 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
392 <&cpu2 7 7>, <&cpu3 7 7>;
393 };
394 map1 {
395 /* Corresponds to 200MHz at freq_table */
396 cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
397 <&cpu2 13 13>, <&cpu3 13 13>;
398 };
399 };
400};
401
402&csis_0 {
403 status = "okay";
404 vddcore-supply = <&ldo8_reg>;
405 vddio-supply = <&ldo10_reg>;
406 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
407 <&clock CLK_SCLK_CSIS0>;
408 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
409 assigned-clock-rates = <0>, <176000000>;
410
411 /* Camera C (3) MIPI CSI-2 (CSIS0) */
412 port@3 {
413 reg = <3>;
414 csis0_ep: endpoint {
415 remote-endpoint = <&s5c73m3_ep>;
416 data-lanes = <1 2 3 4>;
417 samsung,csis-hs-settle = <12>;
418 };
419 };
420};
421
422&csis_1 {
423 status = "okay";
424 vddcore-supply = <&ldo8_reg>;
425 vddio-supply = <&ldo10_reg>;
426 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
427 <&clock CLK_SCLK_CSIS1>;
428 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
429 assigned-clock-rates = <0>, <176000000>;
430
431 /* Camera D (4) MIPI CSI-2 (CSIS1) */
432 port@4 {
433 reg = <4>;
434 csis1_ep: endpoint {
435 remote-endpoint = <&is_s5k6a3_ep>;
436 data-lanes = <1>;
437 samsung,csis-hs-settle = <18>;
438 samsung,csis-wclk;
439 };
440 };
441};
442
443&dsi_0 {
444 vddcore-supply = <&ldo8_reg>;
445 vddio-supply = <&ldo10_reg>;
446 samsung,burst-clock-frequency = <500000000>;
447 samsung,esc-clock-frequency = <20000000>;
448 samsung,pll-clock-frequency = <24000000>;
449};
450
451&exynos_usbphy {
452 vbus-supply = <&esafeout1_reg>;
453 status = "okay";
454};
455
456&fimc_0 {
457 status = "okay";
458 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
459 <&clock CLK_SCLK_FIMC0>;
460 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
461 assigned-clock-rates = <0>, <176000000>;
462};
463
464&fimc_1 {
465 status = "okay";
466 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
467 <&clock CLK_SCLK_FIMC1>;
468 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
469 assigned-clock-rates = <0>, <176000000>;
470};
471
472&fimc_2 {
473 status = "okay";
474 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
475 <&clock CLK_SCLK_FIMC2>;
476 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
477 assigned-clock-rates = <0>, <176000000>;
478};
479
480&fimc_3 {
481 status = "okay";
482 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
483 <&clock CLK_SCLK_FIMC3>;
484 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
485 assigned-clock-rates = <0>, <176000000>;
486};
487
488&fimc_is {
489 pinctrl-0 = <&fimc_is_uart>;
490 pinctrl-names = "default";
491 status = "okay";
492
493 };
494
495&fimc_lite_0 {
496 status = "okay";
497};
498
499&fimc_lite_1 {
500 status = "okay";
501};
502
503&fimd {
504 status = "okay";
505};
506
507&gpu {
508 mali-supply = <&buck4_reg>;
509 status = "okay";
510};
511
512&hdmi {
513 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
514 pinctrl-names = "default";
515 pinctrl-0 = <&hdmi_hpd>;
516 vdd-supply = <&ldo3_reg>;
517 vdd_osc-supply = <&ldo4_reg>;
518 vdd_pll-supply = <&ldo3_reg>;
519 ddc = <&i2c_5>;
520 status = "okay";
521
522 ports {
523 #address-cells = <1>;
524 #size-cells = <0>;
525
526 port@1 {
527 reg = <1>;
528 hdmi_to_mhl: endpoint {
529 remote-endpoint = <&mhl_to_hdmi>;
530 };
531 };
532 };
533};
534
535&hsotg {
536 vusb_d-supply = <&ldo15_reg>;
537 vusb_a-supply = <&ldo12_reg>;
538 dr_mode = "peripheral";
539 status = "okay";
540};
541
542&i2c_0 {
543 samsung,i2c-sda-delay = <100>;
544 samsung,i2c-slave-addr = <0x10>;
545 samsung,i2c-max-bus-freq = <400000>;
546 pinctrl-0 = <&i2c0_bus>;
547 pinctrl-names = "default";
548 status = "okay";
549
550 s5c73m3: image-sensor@3c {
551 compatible = "samsung,s5c73m3";
552 reg = <0x3c>;
553 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
554 vdd-int-supply = <&buck9_reg>;
555 vddio-cis-supply = <&ldo9_reg>;
556 vddio-host-supply = <&ldo18_reg>;
557 vdd-af-supply = <&cam_af_reg>;
558 vdd-reg-supply = <&cam_io_reg>;
559 clock-frequency = <24000000>;
560 /* CAM_A_CLKOUT */
561 clocks = <&camera 0>;
562 clock-names = "cis_extclk";
563 status = "disabled";
564 port {
565 s5c73m3_ep: endpoint {
566 remote-endpoint = <&csis0_ep>;
567 data-lanes = <1 2 3 4>;
568 };
569 };
570 };
571};
572
573&i2c1_isp {
574 pinctrl-0 = <&fimc_is_i2c1>;
575 pinctrl-names = "default";
576
577 image-sensor@10 {
578 compatible = "samsung,s5k6a3";
579 reg = <0x10>;
580 svdda-supply = <&cam_io_reg>;
581 svddio-supply = <&ldo19_reg>;
582 afvdd-supply = <&ldo19_reg>;
583 clock-frequency = <24000000>;
584 /* CAM_B_CLKOUT */
585 clocks = <&camera 1>;
586 clock-names = "extclk";
587 samsung,camclk-out = <1>;
588 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
589
590 port {
591 is_s5k6a3_ep: endpoint {
592 remote-endpoint = <&csis1_ep>;
593 data-lanes = <1>;
594 };
595 };
596 };
597};
598
599&i2c_3 {
600 samsung,i2c-sda-delay = <100>;
601 samsung,i2c-slave-addr = <0x10>;
602 samsung,i2c-max-bus-freq = <400000>;
603 pinctrl-0 = <&i2c3_bus>;
604 pinctrl-names = "default";
605 status = "okay";
606};
607
608&i2c_4 {
609 samsung,i2c-sda-delay = <100>;
610 samsung,i2c-slave-addr = <0x10>;
611 samsung,i2c-max-bus-freq = <100000>;
612 pinctrl-0 = <&i2c4_bus>;
613 pinctrl-names = "default";
614 status = "okay";
615
616 wm1811: audio-codec@1a {
617 compatible = "wlf,wm1811";
618 reg = <0x1a>;
619 clocks = <&pmu_system_controller 0>,
620 <&max77686 MAX77686_CLK_PMIC>;
621 clock-names = "MCLK1", "MCLK2";
622 interrupt-controller;
623 #interrupt-cells = <2>;
624 interrupt-parent = <&gpx3>;
625 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
626
627 gpio-controller;
628 #gpio-cells = <2>;
629 #sound-dai-cells = <0>;
630
631 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
632 0x0 0x8000 0x0 0x0 0x0>;
633 wlf,micbias-cfg = <0x2f 0x2b>;
634
635 wlf,lineout1-feedback;
636 wlf,lineout1-se;
637 wlf,lineout2-se;
638 wlf,ldoena-always-driven;
639
640 AVDD2-supply = <&vbatt_reg>;
641 DBVDD1-supply = <&ldo3_reg>;
642 DBVDD2-supply = <&vbatt_reg>;
643 DBVDD3-supply = <&vbatt_reg>;
644 DCVDD-supply = <&ldo3_reg>;
645 CPVDD-supply = <&vbatt_reg>;
646 SPKVDD1-supply = <&vbatt_reg>;
647 SPKVDD2-supply = <&vbatt_reg>;
648 wlf,ldo1ena = <&gpj0 4 0>;
649 wlf,ldo2ena = <&gpj0 4 0>;
650 };
651};
652
653&i2c_5 {
654 status = "okay";
655};
656
657&i2c_7 {
658 samsung,i2c-sda-delay = <100>;
659 samsung,i2c-slave-addr = <0x10>;
660 samsung,i2c-max-bus-freq = <100000>;
661 pinctrl-0 = <&i2c7_bus>;
662 pinctrl-names = "default";
663 status = "okay";
664
665 max77686: pmic@9 {
666 compatible = "maxim,max77686";
667 interrupt-parent = <&gpx0>;
668 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
669 pinctrl-0 = <&max77686_irq>;
670 pinctrl-names = "default";
671 wakeup-source;
672 reg = <0x09>;
673 #clock-cells = <1>;
674
675 voltage-regulators {
676 ldo1_reg: LDO1 {
677 regulator-name = "VALIVE_1.0V_AP";
678 regulator-min-microvolt = <1000000>;
679 regulator-max-microvolt = <1000000>;
680 regulator-always-on;
681 };
682
683 ldo2_reg: LDO2 {
684 regulator-name = "VM1M2_1.2V_AP";
685 regulator-min-microvolt = <1200000>;
686 regulator-max-microvolt = <1200000>;
687 regulator-always-on;
688 regulator-state-mem {
689 regulator-on-in-suspend;
690 };
691 };
692
693 ldo3_reg: LDO3 {
694 regulator-name = "VCC_1.8V_AP";
695 regulator-min-microvolt = <1800000>;
696 regulator-max-microvolt = <1800000>;
697 regulator-always-on;
698 };
699
700 ldo4_reg: LDO4 {
701 regulator-name = "VCC_2.8V_AP";
702 regulator-min-microvolt = <2800000>;
703 regulator-max-microvolt = <2800000>;
704 regulator-always-on;
705 };
706
707 ldo5_reg: LDO5 {
708 regulator-name = "VCC_1.8V_IO";
709 regulator-min-microvolt = <1800000>;
710 regulator-max-microvolt = <1800000>;
711 regulator-always-on;
712 };
713
714 ldo6_reg: LDO6 {
715 regulator-name = "VMPLL_1.0V_AP";
716 regulator-min-microvolt = <1000000>;
717 regulator-max-microvolt = <1000000>;
718 regulator-always-on;
719 regulator-state-mem {
720 regulator-on-in-suspend;
721 };
722 };
723
724 ldo7_reg: LDO7 {
725 regulator-name = "VPLL_1.0V_AP";
726 regulator-min-microvolt = <1000000>;
727 regulator-max-microvolt = <1000000>;
728 regulator-always-on;
729 regulator-state-mem {
730 regulator-on-in-suspend;
731 };
732 };
733
734 ldo8_reg: LDO8 {
735 regulator-name = "VMIPI_1.0V";
736 regulator-min-microvolt = <1000000>;
737 regulator-max-microvolt = <1000000>;
738 regulator-state-mem {
739 regulator-off-in-suspend;
740 };
741 };
742
743 ldo9_reg: LDO9 {
744 regulator-name = "CAM_ISP_MIPI_1.2V";
745 regulator-min-microvolt = <1200000>;
746 regulator-max-microvolt = <1200000>;
747 };
748
749 ldo10_reg: LDO10 {
750 regulator-name = "VMIPI_1.8V";
751 regulator-min-microvolt = <1800000>;
752 regulator-max-microvolt = <1800000>;
753 regulator-state-mem {
754 regulator-off-in-suspend;
755 };
756 };
757
758 ldo11_reg: LDO11 {
759 regulator-name = "VABB1_1.95V";
760 regulator-min-microvolt = <1950000>;
761 regulator-max-microvolt = <1950000>;
762 regulator-always-on;
763 regulator-state-mem {
764 regulator-off-in-suspend;
765 };
766 };
767
768 ldo12_reg: LDO12 {
769 regulator-name = "VUOTG_3.0V";
770 regulator-min-microvolt = <3000000>;
771 regulator-max-microvolt = <3000000>;
772 regulator-state-mem {
773 regulator-off-in-suspend;
774 };
775 };
776
777 ldo13_reg: LDO13 {
778 regulator-name = "NFC_AVDD_1.8V";
779 regulator-min-microvolt = <1800000>;
780 regulator-max-microvolt = <1800000>;
781 };
782
783 ldo14_reg: LDO14 {
784 regulator-name = "VABB2_1.95V";
785 regulator-min-microvolt = <1950000>;
786 regulator-max-microvolt = <1950000>;
787 regulator-always-on;
788 regulator-state-mem {
789 regulator-off-in-suspend;
790 };
791 };
792
793 ldo15_reg: LDO15 {
794 regulator-name = "VHSIC_1.0V";
795 regulator-min-microvolt = <1000000>;
796 regulator-max-microvolt = <1000000>;
797 regulator-state-mem {
798 regulator-on-in-suspend;
799 };
800 };
801
802 ldo16_reg: LDO16 {
803 regulator-name = "VHSIC_1.8V";
804 regulator-min-microvolt = <1800000>;
805 regulator-max-microvolt = <1800000>;
806 regulator-state-mem {
807 regulator-on-in-suspend;
808 };
809 };
810
811 ldo17_reg: LDO17 {
812 regulator-name = "CAM_SENSOR_CORE_1.2V";
813 regulator-min-microvolt = <1200000>;
814 regulator-max-microvolt = <1200000>;
815 };
816
817 ldo18_reg: LDO18 {
818 regulator-name = "CAM_ISP_SEN_IO_1.8V";
819 regulator-min-microvolt = <1800000>;
820 regulator-max-microvolt = <1800000>;
821 };
822
823 ldo19_reg: LDO19 {
824 regulator-name = "VT_CAM_1.8V";
825 regulator-min-microvolt = <1800000>;
826 regulator-max-microvolt = <1800000>;
827 };
828
829 ldo20_reg: LDO20 {
830 regulator-name = "VDDQ_PRE_1.8V";
831 regulator-min-microvolt = <1800000>;
832 regulator-max-microvolt = <1800000>;
833 };
834
835 ldo21_reg: LDO21 {
836 regulator-name = "VTF_2.8V";
837 regulator-min-microvolt = <2800000>;
838 regulator-max-microvolt = <2800000>;
839 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
840 };
841
842 ldo22_reg: LDO22 {
843 regulator-name = "VMEM_VDD_2.8V";
844 regulator-min-microvolt = <2800000>;
845 regulator-max-microvolt = <2800000>;
846 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
847 };
848
849 ldo23_reg: LDO23 {
850 regulator-name = "TSP_AVDD_3.3V";
851 regulator-min-microvolt = <3300000>;
852 regulator-max-microvolt = <3300000>;
853 };
854
855 ldo24_reg: LDO24 {
856 regulator-name = "TSP_VDD_1.8V";
857 regulator-min-microvolt = <1800000>;
858 regulator-max-microvolt = <1800000>;
859 };
860
861 ldo25_reg: LDO25 {
862 regulator-name = "LDO25";
863 };
864
865 ldo26_reg: LDO26 {
866 regulator-name = "MOTOR_VCC_3.0V";
867 regulator-min-microvolt = <3000000>;
868 regulator-max-microvolt = <3000000>;
869 };
870
871 buck1_reg: BUCK1 {
872 regulator-name = "VDD_MIF";
873 regulator-min-microvolt = <850000>;
874 regulator-max-microvolt = <1100000>;
875 regulator-always-on;
876 regulator-boot-on;
877 regulator-state-mem {
878 regulator-off-in-suspend;
879 };
880 };
881
882 buck2_reg: BUCK2 {
883 regulator-name = "VDD_ARM";
884 regulator-min-microvolt = <850000>;
885 regulator-max-microvolt = <1500000>;
886 regulator-always-on;
887 regulator-boot-on;
888 regulator-state-mem {
889 regulator-on-in-suspend;
890 };
891 };
892
893 buck3_reg: BUCK3 {
894 regulator-name = "VDD_INT";
895 regulator-min-microvolt = <850000>;
896 regulator-max-microvolt = <1150000>;
897 regulator-always-on;
898 regulator-boot-on;
899 regulator-state-mem {
900 regulator-off-in-suspend;
901 };
902 };
903
904 buck4_reg: BUCK4 {
905 regulator-name = "VDD_G3D";
906 regulator-min-microvolt = <850000>;
907 regulator-max-microvolt = <1150000>;
908 regulator-boot-on;
909 regulator-state-mem {
910 regulator-off-in-suspend;
911 };
912 };
913
914 buck5_reg: BUCK5 {
915 regulator-name = "VMEM_1.2V_AP";
916 regulator-min-microvolt = <1200000>;
917 regulator-max-microvolt = <1200000>;
918 regulator-always-on;
919 };
920
921 buck6_reg: BUCK6 {
922 regulator-name = "VCC_SUB_1.35V";
923 regulator-min-microvolt = <1350000>;
924 regulator-max-microvolt = <1350000>;
925 regulator-always-on;
926 };
927
928 buck7_reg: BUCK7 {
929 regulator-name = "VCC_SUB_2.0V";
930 regulator-min-microvolt = <2000000>;
931 regulator-max-microvolt = <2000000>;
932 regulator-always-on;
933 };
934
935 buck8_reg: BUCK8 {
936 regulator-name = "VMEM_VDDF_3.0V";
937 regulator-min-microvolt = <2850000>;
938 regulator-max-microvolt = <2850000>;
939 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
940 };
941
942 buck9_reg: BUCK9 {
943 regulator-name = "CAM_ISP_CORE_1.2V";
944 regulator-min-microvolt = <1000000>;
945 regulator-max-microvolt = <1200000>;
946 };
947 };
948 };
949};
950
951&i2c_8 {
952 status = "okay";
953};
954
955&i2s0 {
956 pinctrl-0 = <&i2s0_bus>;
957 pinctrl-names = "default";
958 status = "okay";
959};
960
961&mixer {
962 status = "okay";
963};
964
965&mshc_0 {
966 broken-cd;
967 non-removable;
968 card-detect-delay = <200>;
969 vmmc-supply = <&ldo22_reg>;
970 clock-frequency = <400000000>;
971 samsung,dw-mshc-ciu-div = <0>;
972 samsung,dw-mshc-sdr-timing = <2 3>;
973 samsung,dw-mshc-ddr-timing = <1 2>;
974 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
975 pinctrl-names = "default";
976 status = "okay";
977 bus-width = <8>;
978 cap-mmc-highspeed;
979};
980
981&pmu_system_controller {
982 assigned-clocks = <&pmu_system_controller 0>;
983 assigned-clock-parents = <&clock CLK_XUSBXTI>;
984};
985
986&pinctrl_0 {
987 pinctrl-names = "default";
988 pinctrl-0 = <&sleep0>;
989
990 mhl_int: mhl-int {
991 samsung,pins = "gpf3-5";
992 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
993 };
994
995 i2c_mhl_bus: i2c-mhl-bus {
996 samsung,pins = "gpf0-4", "gpf0-6";
997 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
998 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
999 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1000 };
1001
1002 sleep0: sleep-states {
1003 PIN_SLP(gpa0-0, INPUT, NONE);
1004 PIN_SLP(gpa0-1, OUT0, NONE);
1005 PIN_SLP(gpa0-2, INPUT, NONE);
1006 PIN_SLP(gpa0-3, INPUT, UP);
1007 PIN_SLP(gpa0-4, INPUT, NONE);
1008 PIN_SLP(gpa0-5, INPUT, DOWN);
1009 PIN_SLP(gpa0-6, INPUT, DOWN);
1010 PIN_SLP(gpa0-7, INPUT, UP);
1011
1012 PIN_SLP(gpa1-0, INPUT, DOWN);
1013 PIN_SLP(gpa1-1, INPUT, DOWN);
1014 PIN_SLP(gpa1-2, INPUT, DOWN);
1015 PIN_SLP(gpa1-3, INPUT, DOWN);
1016 PIN_SLP(gpa1-4, INPUT, DOWN);
1017 PIN_SLP(gpa1-5, INPUT, DOWN);
1018
1019 PIN_SLP(gpb-0, INPUT, NONE);
1020 PIN_SLP(gpb-1, INPUT, NONE);
1021 PIN_SLP(gpb-2, INPUT, NONE);
1022 PIN_SLP(gpb-3, INPUT, NONE);
1023 PIN_SLP(gpb-4, INPUT, DOWN);
1024 PIN_SLP(gpb-5, INPUT, UP);
1025 PIN_SLP(gpb-6, INPUT, DOWN);
1026 PIN_SLP(gpb-7, INPUT, DOWN);
1027
1028 PIN_SLP(gpc0-0, INPUT, DOWN);
1029 PIN_SLP(gpc0-1, INPUT, DOWN);
1030 PIN_SLP(gpc0-2, INPUT, DOWN);
1031 PIN_SLP(gpc0-3, INPUT, DOWN);
1032 PIN_SLP(gpc0-4, INPUT, DOWN);
1033
1034 PIN_SLP(gpc1-0, INPUT, NONE);
1035 PIN_SLP(gpc1-1, PREV, NONE);
1036 PIN_SLP(gpc1-2, INPUT, NONE);
1037 PIN_SLP(gpc1-3, INPUT, NONE);
1038 PIN_SLP(gpc1-4, INPUT, NONE);
1039
1040 PIN_SLP(gpd0-0, INPUT, DOWN);
1041 PIN_SLP(gpd0-1, INPUT, DOWN);
1042 PIN_SLP(gpd0-2, INPUT, NONE);
1043 PIN_SLP(gpd0-3, INPUT, NONE);
1044
1045 PIN_SLP(gpd1-0, INPUT, DOWN);
1046 PIN_SLP(gpd1-1, INPUT, DOWN);
1047 PIN_SLP(gpd1-2, INPUT, NONE);
1048 PIN_SLP(gpd1-3, INPUT, NONE);
1049
1050 PIN_SLP(gpf0-0, INPUT, NONE);
1051 PIN_SLP(gpf0-1, INPUT, NONE);
1052 PIN_SLP(gpf0-2, INPUT, DOWN);
1053 PIN_SLP(gpf0-3, INPUT, DOWN);
1054 PIN_SLP(gpf0-4, INPUT, NONE);
1055 PIN_SLP(gpf0-5, INPUT, DOWN);
1056 PIN_SLP(gpf0-6, INPUT, NONE);
1057 PIN_SLP(gpf0-7, INPUT, DOWN);
1058
1059 PIN_SLP(gpf1-0, INPUT, DOWN);
1060 PIN_SLP(gpf1-1, INPUT, DOWN);
1061 PIN_SLP(gpf1-2, INPUT, DOWN);
1062 PIN_SLP(gpf1-3, INPUT, DOWN);
1063 PIN_SLP(gpf1-4, INPUT, NONE);
1064 PIN_SLP(gpf1-5, INPUT, NONE);
1065 PIN_SLP(gpf1-6, INPUT, DOWN);
1066 PIN_SLP(gpf1-7, PREV, NONE);
1067
1068 PIN_SLP(gpf2-0, PREV, NONE);
1069 PIN_SLP(gpf2-1, INPUT, DOWN);
1070 PIN_SLP(gpf2-2, INPUT, DOWN);
1071 PIN_SLP(gpf2-3, INPUT, DOWN);
1072 PIN_SLP(gpf2-4, INPUT, DOWN);
1073 PIN_SLP(gpf2-5, INPUT, DOWN);
1074 PIN_SLP(gpf2-6, INPUT, NONE);
1075 PIN_SLP(gpf2-7, INPUT, NONE);
1076
1077 PIN_SLP(gpf3-0, INPUT, NONE);
1078 PIN_SLP(gpf3-1, PREV, NONE);
1079 PIN_SLP(gpf3-2, PREV, NONE);
1080 PIN_SLP(gpf3-3, PREV, NONE);
1081 PIN_SLP(gpf3-4, OUT1, NONE);
1082 PIN_SLP(gpf3-5, INPUT, DOWN);
1083
1084 PIN_SLP(gpj0-0, PREV, NONE);
1085 PIN_SLP(gpj0-1, PREV, NONE);
1086 PIN_SLP(gpj0-2, PREV, NONE);
1087 PIN_SLP(gpj0-3, INPUT, DOWN);
1088 PIN_SLP(gpj0-4, PREV, NONE);
1089 PIN_SLP(gpj0-5, PREV, NONE);
1090 PIN_SLP(gpj0-6, INPUT, DOWN);
1091 PIN_SLP(gpj0-7, INPUT, DOWN);
1092
1093 PIN_SLP(gpj1-0, INPUT, DOWN);
1094 PIN_SLP(gpj1-1, PREV, NONE);
1095 PIN_SLP(gpj1-2, PREV, NONE);
1096 PIN_SLP(gpj1-3, INPUT, DOWN);
1097 PIN_SLP(gpj1-4, INPUT, DOWN);
1098 };
1099};
1100
1101&pinctrl_1 {
1102 pinctrl-names = "default";
1103 pinctrl-0 = <&sleep1>;
1104
1105 gpio_keys: gpio-keys {
1106 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1107 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1108 };
1109
1110 bt_shutdown: bt-shutdown {
1111 samsung,pins = "gpl0-6";
1112 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1113 };
1114
1115 bt_host_wakeup: bt-host-wakeup {
1116 samsung,pins = "gpx2-6";
1117 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1118 };
1119
1120 bt_device_wakeup: bt-device-wakeup {
1121 samsung,pins = "gpx3-1";
1122 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1123 };
1124
1125 max77686_irq: max77686-irq {
1126 samsung,pins = "gpx0-7";
1127 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1128 };
1129
1130 max77693_irq: max77693-irq {
1131 samsung,pins = "gpx1-5";
1132 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1133 };
1134
1135 max77693_fuel_irq: max77693-fuel-irq {
1136 samsung,pins = "gpx2-3";
1137 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1138 };
1139
1140 sdhci2_cd: sdhci2-cd-irq {
1141 samsung,pins = "gpx3-4";
1142 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1143 };
1144
1145 hdmi_hpd: hdmi-hpd {
1146 samsung,pins = "gpx3-7";
1147 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1148 };
1149
1150 sleep1: sleep-states {
1151 PIN_SLP(gpk0-0, PREV, NONE);
1152 PIN_SLP(gpk0-1, PREV, NONE);
1153 PIN_SLP(gpk0-2, OUT0, NONE);
1154 PIN_SLP(gpk0-3, PREV, NONE);
1155 PIN_SLP(gpk0-4, PREV, NONE);
1156 PIN_SLP(gpk0-5, PREV, NONE);
1157 PIN_SLP(gpk0-6, PREV, NONE);
1158
1159 PIN_SLP(gpk1-0, INPUT, DOWN);
1160 PIN_SLP(gpk1-1, INPUT, DOWN);
1161 PIN_SLP(gpk1-2, INPUT, DOWN);
1162 PIN_SLP(gpk1-3, PREV, NONE);
1163 PIN_SLP(gpk1-4, PREV, NONE);
1164 PIN_SLP(gpk1-5, PREV, NONE);
1165 PIN_SLP(gpk1-6, PREV, NONE);
1166
1167 PIN_SLP(gpk2-0, INPUT, DOWN);
1168 PIN_SLP(gpk2-1, INPUT, DOWN);
1169 PIN_SLP(gpk2-2, INPUT, DOWN);
1170 PIN_SLP(gpk2-3, INPUT, DOWN);
1171 PIN_SLP(gpk2-4, INPUT, DOWN);
1172 PIN_SLP(gpk2-5, INPUT, DOWN);
1173 PIN_SLP(gpk2-6, INPUT, DOWN);
1174
1175 PIN_SLP(gpk3-0, OUT0, NONE);
1176 PIN_SLP(gpk3-1, INPUT, NONE);
1177 PIN_SLP(gpk3-2, INPUT, DOWN);
1178 PIN_SLP(gpk3-3, INPUT, NONE);
1179 PIN_SLP(gpk3-4, INPUT, NONE);
1180 PIN_SLP(gpk3-5, INPUT, NONE);
1181 PIN_SLP(gpk3-6, INPUT, NONE);
1182
1183 PIN_SLP(gpl0-0, INPUT, DOWN);
1184 PIN_SLP(gpl0-1, INPUT, DOWN);
1185 PIN_SLP(gpl0-2, INPUT, DOWN);
1186 PIN_SLP(gpl0-3, INPUT, DOWN);
1187 PIN_SLP(gpl0-4, PREV, NONE);
1188 PIN_SLP(gpl0-6, PREV, NONE);
1189
1190 PIN_SLP(gpl1-0, INPUT, DOWN);
1191 PIN_SLP(gpl1-1, INPUT, DOWN);
1192 PIN_SLP(gpl2-0, INPUT, DOWN);
1193 PIN_SLP(gpl2-1, INPUT, DOWN);
1194 PIN_SLP(gpl2-2, INPUT, DOWN);
1195 PIN_SLP(gpl2-3, INPUT, DOWN);
1196 PIN_SLP(gpl2-4, INPUT, DOWN);
1197 PIN_SLP(gpl2-5, INPUT, DOWN);
1198 PIN_SLP(gpl2-6, PREV, NONE);
1199 PIN_SLP(gpl2-7, INPUT, DOWN);
1200
1201 PIN_SLP(gpm0-0, INPUT, DOWN);
1202 PIN_SLP(gpm0-1, INPUT, DOWN);
1203 PIN_SLP(gpm0-2, INPUT, DOWN);
1204 PIN_SLP(gpm0-3, INPUT, DOWN);
1205 PIN_SLP(gpm0-4, INPUT, DOWN);
1206 PIN_SLP(gpm0-5, INPUT, DOWN);
1207 PIN_SLP(gpm0-6, INPUT, DOWN);
1208 PIN_SLP(gpm0-7, INPUT, DOWN);
1209
1210 PIN_SLP(gpm1-0, INPUT, DOWN);
1211 PIN_SLP(gpm1-1, INPUT, DOWN);
1212 PIN_SLP(gpm1-2, INPUT, NONE);
1213 PIN_SLP(gpm1-3, INPUT, NONE);
1214 PIN_SLP(gpm1-4, INPUT, NONE);
1215 PIN_SLP(gpm1-5, INPUT, NONE);
1216 PIN_SLP(gpm1-6, INPUT, DOWN);
1217
1218 PIN_SLP(gpm2-0, INPUT, NONE);
1219 PIN_SLP(gpm2-1, INPUT, NONE);
1220 PIN_SLP(gpm2-2, INPUT, DOWN);
1221 PIN_SLP(gpm2-3, INPUT, DOWN);
1222 PIN_SLP(gpm2-4, INPUT, DOWN);
1223
1224 PIN_SLP(gpm3-0, PREV, NONE);
1225 PIN_SLP(gpm3-1, PREV, NONE);
1226 PIN_SLP(gpm3-2, PREV, NONE);
1227 PIN_SLP(gpm3-3, OUT1, NONE);
1228 PIN_SLP(gpm3-4, INPUT, DOWN);
1229 PIN_SLP(gpm3-5, INPUT, DOWN);
1230 PIN_SLP(gpm3-6, INPUT, DOWN);
1231 PIN_SLP(gpm3-7, INPUT, DOWN);
1232
1233 PIN_SLP(gpm4-0, INPUT, DOWN);
1234 PIN_SLP(gpm4-1, INPUT, DOWN);
1235 PIN_SLP(gpm4-2, INPUT, DOWN);
1236 PIN_SLP(gpm4-3, INPUT, DOWN);
1237 PIN_SLP(gpm4-4, INPUT, DOWN);
1238 PIN_SLP(gpm4-5, INPUT, DOWN);
1239 PIN_SLP(gpm4-6, INPUT, DOWN);
1240 PIN_SLP(gpm4-7, INPUT, DOWN);
1241
1242 PIN_SLP(gpy0-0, INPUT, DOWN);
1243 PIN_SLP(gpy0-1, INPUT, DOWN);
1244 PIN_SLP(gpy0-2, INPUT, DOWN);
1245 PIN_SLP(gpy0-3, INPUT, DOWN);
1246 PIN_SLP(gpy0-4, INPUT, DOWN);
1247 PIN_SLP(gpy0-5, INPUT, DOWN);
1248
1249 PIN_SLP(gpy1-0, INPUT, DOWN);
1250 PIN_SLP(gpy1-1, INPUT, DOWN);
1251 PIN_SLP(gpy1-2, INPUT, DOWN);
1252 PIN_SLP(gpy1-3, INPUT, DOWN);
1253
1254 PIN_SLP(gpy2-0, PREV, NONE);
1255 PIN_SLP(gpy2-1, INPUT, DOWN);
1256 PIN_SLP(gpy2-2, INPUT, NONE);
1257 PIN_SLP(gpy2-3, INPUT, NONE);
1258 PIN_SLP(gpy2-4, INPUT, NONE);
1259 PIN_SLP(gpy2-5, INPUT, NONE);
1260
1261 PIN_SLP(gpy3-0, INPUT, DOWN);
1262 PIN_SLP(gpy3-1, INPUT, DOWN);
1263 PIN_SLP(gpy3-2, INPUT, DOWN);
1264 PIN_SLP(gpy3-3, INPUT, DOWN);
1265 PIN_SLP(gpy3-4, INPUT, DOWN);
1266 PIN_SLP(gpy3-5, INPUT, DOWN);
1267 PIN_SLP(gpy3-6, INPUT, DOWN);
1268 PIN_SLP(gpy3-7, INPUT, DOWN);
1269
1270 PIN_SLP(gpy4-0, INPUT, DOWN);
1271 PIN_SLP(gpy4-1, INPUT, DOWN);
1272 PIN_SLP(gpy4-2, INPUT, DOWN);
1273 PIN_SLP(gpy4-3, INPUT, DOWN);
1274 PIN_SLP(gpy4-4, INPUT, DOWN);
1275 PIN_SLP(gpy4-5, INPUT, DOWN);
1276 PIN_SLP(gpy4-6, INPUT, DOWN);
1277 PIN_SLP(gpy4-7, INPUT, DOWN);
1278
1279 PIN_SLP(gpy5-0, INPUT, DOWN);
1280 PIN_SLP(gpy5-1, INPUT, DOWN);
1281 PIN_SLP(gpy5-2, INPUT, DOWN);
1282 PIN_SLP(gpy5-3, INPUT, DOWN);
1283 PIN_SLP(gpy5-4, INPUT, DOWN);
1284 PIN_SLP(gpy5-5, INPUT, DOWN);
1285 PIN_SLP(gpy5-6, INPUT, DOWN);
1286 PIN_SLP(gpy5-7, INPUT, DOWN);
1287
1288 PIN_SLP(gpy6-0, INPUT, DOWN);
1289 PIN_SLP(gpy6-1, INPUT, DOWN);
1290 PIN_SLP(gpy6-2, INPUT, DOWN);
1291 PIN_SLP(gpy6-3, INPUT, DOWN);
1292 PIN_SLP(gpy6-4, INPUT, DOWN);
1293 PIN_SLP(gpy6-5, INPUT, DOWN);
1294 PIN_SLP(gpy6-6, INPUT, DOWN);
1295 PIN_SLP(gpy6-7, INPUT, DOWN);
1296 };
1297};
1298
1299&pinctrl_2 {
1300 pinctrl-names = "default";
1301 pinctrl-0 = <&sleep2>;
1302
1303 sleep2: sleep-states {
1304 PIN_SLP(gpz-0, INPUT, DOWN);
1305 PIN_SLP(gpz-1, INPUT, DOWN);
1306 PIN_SLP(gpz-2, INPUT, DOWN);
1307 PIN_SLP(gpz-3, INPUT, DOWN);
1308 PIN_SLP(gpz-4, INPUT, DOWN);
1309 PIN_SLP(gpz-5, INPUT, DOWN);
1310 PIN_SLP(gpz-6, INPUT, DOWN);
1311 };
1312};
1313
1314&pinctrl_3 {
1315 pinctrl-names = "default";
1316 pinctrl-0 = <&sleep3>;
1317
1318 sleep3: sleep-states {
1319 PIN_SLP(gpv0-0, INPUT, DOWN);
1320 PIN_SLP(gpv0-1, INPUT, DOWN);
1321 PIN_SLP(gpv0-2, INPUT, DOWN);
1322 PIN_SLP(gpv0-3, INPUT, DOWN);
1323 PIN_SLP(gpv0-4, INPUT, DOWN);
1324 PIN_SLP(gpv0-5, INPUT, DOWN);
1325 PIN_SLP(gpv0-6, INPUT, DOWN);
1326 PIN_SLP(gpv0-7, INPUT, DOWN);
1327
1328 PIN_SLP(gpv1-0, INPUT, DOWN);
1329 PIN_SLP(gpv1-1, INPUT, DOWN);
1330 PIN_SLP(gpv1-2, INPUT, DOWN);
1331 PIN_SLP(gpv1-3, INPUT, DOWN);
1332 PIN_SLP(gpv1-4, INPUT, DOWN);
1333 PIN_SLP(gpv1-5, INPUT, DOWN);
1334 PIN_SLP(gpv1-6, INPUT, DOWN);
1335 PIN_SLP(gpv1-7, INPUT, DOWN);
1336
1337 PIN_SLP(gpv2-0, INPUT, DOWN);
1338 PIN_SLP(gpv2-1, INPUT, DOWN);
1339 PIN_SLP(gpv2-2, INPUT, DOWN);
1340 PIN_SLP(gpv2-3, INPUT, DOWN);
1341 PIN_SLP(gpv2-4, INPUT, DOWN);
1342 PIN_SLP(gpv2-5, INPUT, DOWN);
1343 PIN_SLP(gpv2-6, INPUT, DOWN);
1344 PIN_SLP(gpv2-7, INPUT, DOWN);
1345
1346 PIN_SLP(gpv3-0, INPUT, DOWN);
1347 PIN_SLP(gpv3-1, INPUT, DOWN);
1348 PIN_SLP(gpv3-2, INPUT, DOWN);
1349 PIN_SLP(gpv3-3, INPUT, DOWN);
1350 PIN_SLP(gpv3-4, INPUT, DOWN);
1351 PIN_SLP(gpv3-5, INPUT, DOWN);
1352 PIN_SLP(gpv3-6, INPUT, DOWN);
1353 PIN_SLP(gpv3-7, INPUT, DOWN);
1354
1355 PIN_SLP(gpv4-0, INPUT, DOWN);
1356 };
1357};
1358
1359&pwm {
1360 pinctrl-0 = <&pwm0_out>;
1361 pinctrl-names = "default";
1362 samsung,pwm-outputs = <0>;
1363 status = "okay";
1364};
1365
1366&rtc {
1367 status = "okay";
1368 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1369 clock-names = "rtc", "rtc_src";
1370};
1371
1372&sdhci_2 {
1373 bus-width = <4>;
1374 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1375 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1376 pinctrl-names = "default";
1377 vmmc-supply = <&ldo21_reg>;
1378 status = "okay";
1379};
1380
1381&sdhci_3 {
1382 #address-cells = <1>;
1383 #size-cells = <0>;
1384 non-removable;
1385 bus-width = <4>;
1386
1387 mmc-pwrseq = <&wlan_pwrseq>;
1388 pinctrl-names = "default";
1389 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1390 status = "okay";
1391
1392 brcmf: wifi@1 {
1393 reg = <1>;
1394 compatible = "brcm,bcm4329-fmac";
1395 interrupt-parent = <&gpx2>;
1396 interrupts = <5 IRQ_TYPE_NONE>;
1397 interrupt-names = "host-wake";
1398 };
1399};
1400
1401&serial_0 {
1402 pinctrl-0 = <&uart0_data &uart0_fctl>;
1403 pinctrl-names = "default";
1404 status = "okay";
1405
1406 bluetooth {
1407 compatible = "brcm,bcm4330-bt";
1408 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1409 pinctrl-names = "default";
1410 max-speed = <3000000>;
1411 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
1412 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
1413 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
1414 clocks = <&max77686 MAX77686_CLK_PMIC>;
1415 };
1416};
1417
1418&serial_1 {
1419 status = "okay";
1420};
1421
1422&serial_2 {
1423 status = "okay";
1424};
1425
1426&serial_3 {
1427 status = "okay";
1428};
1429
1430&spi_1 {
1431 pinctrl-names = "default";
1432 pinctrl-0 = <&spi1_bus>;
1433 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1434 status = "okay";
1435
1436 s5c73m3_spi: image-sensor@0 {
1437 compatible = "samsung,s5c73m3";
1438 spi-max-frequency = <50000000>;
1439 reg = <0>;
1440 controller-data {
1441 samsung,spi-feedback-delay = <2>;
1442 };
1443 };
1444};
1445
1446&tmu {
1447 vtmu-supply = <&ldo10_reg>;
1448 status = "okay";
1449};