Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig ARCH_PXA
3 bool "PXA2xx/PXA3xx-based"
4 depends on ARCH_MULTI_V5
5 depends on CPU_LITTLE_ENDIAN
6 select ARM_CPU_SUSPEND if PM
7 select CLKSRC_PXA
8 select CLKSRC_MMIO
9 select TIMER_OF
10 select CPU_XSCALE if !CPU_XSC3
11 select GPIO_PXA
12 select GPIOLIB
13 select PLAT_PXA
14 help
15 Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
16
17if ARCH_PXA
18
19config MACH_PXA25X_DT
20 bool "Support PXA25x platforms from device tree"
21 select PINCTRL
22 select POWER_SUPPLY
23 select PXA25x
24 select USE_OF
25 help
26 Include support for Marvell PXA25x based platforms using
27 the device tree. Needn't select any other machine while
28 MACH_PXA25x_DT is enabled.
29
30config MACH_PXA27X_DT
31 bool "Support PXA27x platforms from device tree"
32 select PINCTRL
33 select POWER_SUPPLY
34 select PXA27x
35 select USE_OF
36 help
37 Include support for Marvell PXA27x based platforms using
38 the device tree. Needn't select any other machine while
39 MACH_PXA27X_DT is enabled.
40
41config MACH_PXA3XX_DT
42 bool "Support PXA3xx platforms from device tree"
43 select CPU_PXA300
44 select CPU_PXA310
45 select CPU_PXA320
46 select PINCTRL
47 select POWER_SUPPLY
48 select PXA3xx
49 select USE_OF
50 help
51 Include support for Marvell PXA3xx based platforms using
52 the device tree. Needn't select any other machine while
53 MACH_PXA3XX_DT is enabled.
54
55if ATAGS
56
57comment "Legacy board files"
58
59config ARCH_GUMSTIX
60 bool "Gumstix XScale 255 boards"
61 select PXA25x
62 help
63 Say Y here if you intend to run this kernel on
64 Basix, Connex, ws-200ax, ws-400ax systems
65
66choice
67 prompt "Gumstix Carrier/Expansion Board"
68 depends on ARCH_GUMSTIX
69
70config GUMSTIX_AM200EPD
71 bool "Enable AM200EPD board support"
72
73config GUMSTIX_AM300EPD
74 bool "Enable AM300EPD board support"
75
76endchoice
77
78config PXA_SHARPSL
79 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
80 select SHARP_PARAM
81 select SHARP_SCOOP
82 help
83 Say Y here if you intend to run this kernel on a
84 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
85 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
86 SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
87 handheld computer.
88
89config PXA_SHARPSL_DETECT_MACH_ID
90 bool "Detect machine ID at run-time in the decompressor"
91 depends on PXA_SHARPSL
92 help
93 Say Y here if you want the zImage decompressor to detect
94 the Zaurus machine ID at run-time. For latest kexec-based
95 boot loader, this is not necessary.
96
97config MACH_AKITA
98 bool "Enable Sharp SL-1000 (Akita) Support"
99 depends on PXA_SHARPSL
100 select I2C
101 select I2C_PXA
102 select MACH_SPITZ
103 select PXA27x
104 select PXA_SHARP_Cxx00
105
106config MACH_SPITZ
107 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
108 depends on PXA_SHARPSL
109 select PXA27x
110 select PXA_SHARP_Cxx00
111
112config MACH_BORZOI
113 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
114 depends on PXA_SHARPSL
115 select PXA27x
116 select PXA_SHARP_Cxx00
117
118endif # ATAGS
119
120config PXA25x
121 bool
122 select CPU_XSCALE
123 help
124 Select code specific to PXA21x/25x/26x variants
125
126config PXA27x
127 bool
128 select CPU_XSCALE
129 help
130 Select code specific to PXA27x variants
131
132config PXA3xx
133 bool
134 select CPU_XSC3
135 help
136 Select code specific to PXA3xx variants
137
138config CPU_PXA300
139 bool
140 select PXA3xx
141 help
142 PXA300 (codename Monahans-L)
143
144config CPU_PXA310
145 bool
146 select CPU_PXA300
147 help
148 PXA310 (codename Monahans-LV)
149
150config CPU_PXA320
151 bool
152 select PXA3xx
153 help
154 PXA320 (codename Monahans-P)
155
156config PXA_SHARP_Cxx00
157 bool
158 select SHARPSL_PM
159 help
160 Enable common support for Sharp Cxx00 models
161
162config SHARPSL_PM
163 bool
164 select APM_EMULATION
165 select SHARPSL_PM_MAX1111
166
167config SHARPSL_PM_MAX1111
168 bool
169 select HWMON
170 select SENSORS_MAX1111
171 select SPI
172 select SPI_MASTER
173
174endif
1# SPDX-License-Identifier: GPL-2.0-only
2if ARCH_PXA
3
4menu "Intel PXA2xx/PXA3xx Implementations"
5
6comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
7
8config MACH_PXA25X_DT
9 bool "Support PXA25x platforms from device tree"
10 select PINCTRL
11 select POWER_SUPPLY
12 select PXA25x
13 select USE_OF
14 help
15 Include support for Marvell PXA25x based platforms using
16 the device tree. Needn't select any other machine while
17 MACH_PXA25x_DT is enabled.
18
19config MACH_PXA27X_DT
20 bool "Support PXA27x platforms from device tree"
21 select PINCTRL
22 select POWER_SUPPLY
23 select PXA27x
24 select USE_OF
25 help
26 Include support for Marvell PXA27x based platforms using
27 the device tree. Needn't select any other machine while
28 MACH_PXA27X_DT is enabled.
29
30config MACH_PXA3XX_DT
31 bool "Support PXA3xx platforms from device tree"
32 select CPU_PXA300
33 select PINCTRL
34 select POWER_SUPPLY
35 select PXA3xx
36 select USE_OF
37 help
38 Include support for Marvell PXA3xx based platforms using
39 the device tree. Needn't select any other machine while
40 MACH_PXA3XX_DT is enabled.
41
42config ARCH_LUBBOCK
43 bool "Intel DBPXA250 Development Platform (aka Lubbock)"
44 select GPIO_REG
45 select PXA25x
46 select SA1111
47
48config MACH_MAINSTONE
49 bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
50 select GPIO_REG
51 select PXA27x
52
53config MACH_ZYLONITE
54 bool
55 select PXA3xx
56
57config MACH_ZYLONITE300
58 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
59 select CPU_PXA300
60 select CPU_PXA310
61 select MACH_ZYLONITE
62
63config MACH_ZYLONITE320
64 bool "PXA3xx Development Platform (aka Zylonite) PXA320"
65 select CPU_PXA320
66 select MACH_ZYLONITE
67
68config MACH_LITTLETON
69 bool "PXA3xx Form Factor Platform (aka Littleton)"
70 select CPU_PXA300
71 select CPU_PXA310
72 select PXA3xx
73
74config MACH_TAVOREVB
75 bool "PXA930 Evaluation Board (aka TavorEVB)"
76 select CPU_PXA930
77 select CPU_PXA935
78 select PXA3xx
79 select FB
80 select FB_PXA
81
82config MACH_SAAR
83 bool "PXA930 Handheld Platform (aka SAAR)"
84 select CPU_PXA930
85 select CPU_PXA935
86 select PXA3xx
87 select FB
88 select FB_PXA
89
90comment "Third Party Dev Platforms (sorted by vendor name)"
91
92config ARCH_PXA_IDP
93 bool "Accelent Xscale IDP"
94 select PXA25x
95
96config ARCH_VIPER
97 bool "Arcom/Eurotech VIPER SBC"
98 select ARCOM_PCMCIA
99 select I2C_GPIO if I2C=y
100 select ISA
101 select PXA25x
102
103config MACH_ARCOM_ZEUS
104 bool "Arcom/Eurotech ZEUS SBC"
105 select ARCOM_PCMCIA
106 select ISA
107 select PXA27x
108
109config MACH_BALLOON3
110 bool "Balloon 3 board"
111 select IWMMXT
112 select PXA27x
113
114config MACH_CSB726
115 bool "Enable Cogent CSB726 System On a Module"
116 select IWMMXT
117 select PXA27x
118 help
119 Say Y here if you intend to run this kernel on a Cogent
120 CSB726 System On Module.
121
122config CSB726_CSB701
123 bool "Enable support for CSB701 baseboard"
124 depends on MACH_CSB726
125
126config MACH_CM_X300
127 bool "CompuLab CM-X300 modules"
128 select CPU_PXA300
129 select CPU_PXA310
130 select PXA3xx
131
132config MACH_CAPC7117
133 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
134 select CPU_PXA320
135 select PXA3xx
136
137config ARCH_GUMSTIX
138 bool "Gumstix XScale 255 boards"
139 select PXA25x
140 help
141 Say Y here if you intend to run this kernel on
142 Basix, Connex, ws-200ax, ws-400ax systems
143
144choice
145 prompt "Gumstix Carrier/Expansion Board"
146 depends on ARCH_GUMSTIX
147
148config GUMSTIX_AM200EPD
149 bool "Enable AM200EPD board support"
150
151config GUMSTIX_AM300EPD
152 bool "Enable AM300EPD board support"
153
154endchoice
155
156config MACH_INTELMOTE2
157 bool "Intel Mote 2 Platform"
158 select IWMMXT
159 select PXA27x
160
161config MACH_STARGATE2
162 bool "Intel Stargate 2 Platform"
163 select IWMMXT
164 select PXA27x
165
166config MACH_XCEP
167 bool "Iskratel Electronics XCEP"
168 select MTD
169 select MTD_CFI
170 select MTD_CFI_INTELEXT
171 select MTD_PHYSMAP
172 select PXA25x
173 help
174 PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
175 Tuned for usage in Libera instruments for particle accelerators.
176
177config TRIZEPS_PXA
178 bool "PXA based Keith und Koep Trizeps DIMM-Modules"
179
180config MACH_TRIZEPS4
181 bool "Keith und Koep Trizeps4 DIMM-Module"
182 depends on TRIZEPS_PXA
183 select PXA27x
184 select TRIZEPS_PCMCIA
185
186config MACH_TRIZEPS4WL
187 bool "Keith und Koep Trizeps4-WL DIMM-Module"
188 depends on TRIZEPS_PXA
189 select MACH_TRIZEPS4
190 select PXA27x
191 select TRIZEPS_PCMCIA
192
193choice
194 prompt "Select base board for Trizeps module"
195 depends on TRIZEPS_PXA
196
197config MACH_TRIZEPS_CONXS
198 bool "ConXS Eval Board"
199
200config MACH_TRIZEPS_UCONXS
201 bool "uConXS Eval Board"
202
203config MACH_TRIZEPS_ANY
204 bool "another Board"
205
206endchoice
207
208config ARCOM_PCMCIA
209 bool
210 help
211 Generic option for Arcom Viper/Zeus PCMCIA
212
213config TRIZEPS_PCMCIA
214 bool
215 help
216 Enable PCMCIA support for Trizeps modules
217
218config MACH_LOGICPD_PXA270
219 bool "LogicPD PXA270 Card Engine Development Platform"
220 select PXA27x
221
222config MACH_PCM027
223 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
224 select IWMMXT
225 select PXA27x
226
227config MACH_PCM990_BASEBOARD
228 bool "PHYTEC PCM-990 development board"
229 depends on MACH_PCM027
230
231choice
232 prompt "display on pcm990"
233 depends on MACH_PCM990_BASEBOARD
234
235config PCM990_DISPLAY_SHARP
236 bool "sharp lq084v1dg21 stn display"
237
238config PCM990_DISPLAY_NEC
239 bool "nec nl6448bc20_18d tft display"
240
241config PCM990_DISPLAY_NONE
242 bool "no display"
243
244endchoice
245
246config MACH_COLIBRI
247 bool "Toradex Colibri PXA270"
248 select PXA27x
249
250config MACH_COLIBRI_PXA270_INCOME
251 bool "Income s.r.o. PXA270 SBC"
252 depends on MACH_COLIBRI
253 select PXA27x
254
255config MACH_COLIBRI300
256 bool "Toradex Colibri PXA300/310"
257 select CPU_PXA300
258 select CPU_PXA310
259 select PXA3xx
260
261config MACH_COLIBRI320
262 bool "Toradex Colibri PXA320"
263 select CPU_PXA320
264 select PXA3xx
265
266config MACH_COLIBRI_EVALBOARD
267 bool "Toradex Colibri Evaluation Carrier Board support"
268 depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
269
270config MACH_VPAC270
271 bool "Voipac PXA270"
272 select HAVE_PATA_PLATFORM
273 select PXA27x
274 help
275 PXA270 based Single Board Computer.
276
277comment "End-user Products (sorted by vendor name)"
278
279config MACH_H4700
280 bool "HP iPAQ hx4700"
281 select IWMMXT
282 select PXA27x
283
284config MACH_H5000
285 bool "HP iPAQ h5000"
286 select PXA25x
287
288config MACH_HIMALAYA
289 bool "HTC Himalaya Support"
290 select CPU_PXA26x
291
292config MACH_MAGICIAN
293 bool "Enable HTC Magician Support"
294 select IWMMXT
295 select PXA27x
296
297config MACH_MIOA701
298 bool "Mitac Mio A701 Support"
299 select IWMMXT
300 select PXA27x
301 help
302 Say Y here if you intend to run this kernel on a
303 MIO A701. Currently there is only basic support
304 for this PDA.
305
306config PXA_EZX
307 bool "Motorola EZX Platform"
308 select IWMMXT
309 select PXA27x
310
311config MACH_EZX_A780
312 bool "Motorola EZX A780"
313 default y
314 depends on PXA_EZX
315
316config MACH_EZX_E680
317 bool "Motorola EZX E680"
318 default y
319 depends on PXA_EZX
320
321config MACH_EZX_A1200
322 bool "Motorola EZX A1200"
323 default y
324 depends on PXA_EZX
325
326config MACH_EZX_A910
327 bool "Motorola EZX A910"
328 default y
329 depends on PXA_EZX
330
331config MACH_EZX_E6
332 bool "Motorola EZX E6"
333 default y
334 depends on PXA_EZX
335
336config MACH_EZX_E2
337 bool "Motorola EZX E2"
338 default y
339 depends on PXA_EZX
340
341config MACH_MP900C
342 bool "Nec Mobilepro 900/c"
343 select PXA25x
344
345config ARCH_PXA_PALM
346 bool "PXA based Palm PDAs"
347
348config MACH_PALM27X
349 bool
350
351config MACH_PALMTE2
352 bool "Palm Tungsten|E2"
353 default y
354 depends on ARCH_PXA_PALM
355 select PXA25x
356 help
357 Say Y here if you intend to run this kernel on a Palm Tungsten|E2
358 handheld computer.
359
360config MACH_PALMTC
361 bool "Palm Tungsten|C"
362 default y
363 depends on ARCH_PXA_PALM
364 select PXA25x
365 help
366 Say Y here if you intend to run this kernel on a Palm Tungsten|C
367 handheld computer.
368
369config MACH_PALMT5
370 bool "Palm Tungsten|T5"
371 default y
372 depends on ARCH_PXA_PALM
373 select IWMMXT
374 select MACH_PALM27X
375 select PXA27x
376 help
377 Say Y here if you intend to run this kernel on a Palm Tungsten|T5
378 handheld computer.
379
380config MACH_PALMTX
381 bool "Palm T|X"
382 default y
383 depends on ARCH_PXA_PALM
384 select IWMMXT
385 select MACH_PALM27X
386 select PXA27x
387 help
388 Say Y here if you intend to run this kernel on a Palm T|X
389 handheld computer.
390
391config MACH_PALMZ72
392 bool "Palm Zire 72"
393 default y
394 depends on ARCH_PXA_PALM
395 select IWMMXT
396 select MACH_PALM27X
397 select PXA27x
398 help
399 Say Y here if you intend to run this kernel on Palm Zire 72
400 handheld computer.
401
402config MACH_PALMLD
403 bool "Palm LifeDrive"
404 default y
405 depends on ARCH_PXA_PALM
406 select IWMMXT
407 select MACH_PALM27X
408 select PXA27x
409 help
410 Say Y here if you intend to run this kernel on a Palm LifeDrive
411 handheld computer.
412
413config PALM_TREO
414 bool
415 depends on ARCH_PXA_PALM
416
417config MACH_CENTRO
418 bool "Palm Centro 685 (GSM)"
419 default y
420 depends on ARCH_PXA_PALM
421 select IWMMXT
422 select MACH_PALM27X
423 select PALM_TREO
424 select PXA27x
425 help
426 Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
427 smartphone.
428
429config MACH_TREO680
430 bool "Palm Treo 680"
431 default y
432 depends on ARCH_PXA_PALM
433 select IWMMXT
434 select MACH_PALM27X
435 select PALM_TREO
436 select PXA27x
437 help
438 Say Y here if you intend to run this kernel on Palm Treo 680
439 smartphone.
440
441config PXA_SHARPSL
442 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
443 select SHARP_PARAM
444 select SHARP_SCOOP
445 help
446 Say Y here if you intend to run this kernel on a
447 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
448 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
449 SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
450 handheld computer.
451
452config PXA_SHARPSL_DETECT_MACH_ID
453 bool "Detect machine ID at run-time in the decompressor"
454 depends on PXA_SHARPSL
455 help
456 Say Y here if you want the zImage decompressor to detect
457 the Zaurus machine ID at run-time. For latest kexec-based
458 boot loader, this is not necessary.
459
460config MACH_POODLE
461 bool "Enable Sharp SL-5600 (Poodle) Support"
462 depends on PXA_SHARPSL
463 select PXA25x
464 select SHARP_LOCOMO
465
466config MACH_CORGI
467 bool "Enable Sharp SL-C700 (Corgi) Support"
468 depends on PXA_SHARPSL
469 select PXA25x
470 select PXA_SHARP_C7xx
471
472config MACH_SHEPHERD
473 bool "Enable Sharp SL-C750 (Shepherd) Support"
474 depends on PXA_SHARPSL
475 select PXA25x
476 select PXA_SHARP_C7xx
477
478config MACH_HUSKY
479 bool "Enable Sharp SL-C760 (Husky) Support"
480 depends on PXA_SHARPSL
481 select PXA25x
482 select PXA_SHARP_C7xx
483
484config MACH_AKITA
485 bool "Enable Sharp SL-1000 (Akita) Support"
486 depends on PXA_SHARPSL
487 select I2C
488 select I2C_PXA
489 select MACH_SPITZ
490 select PXA27x
491 select PXA_SHARP_Cxx00
492
493config MACH_SPITZ
494 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
495 depends on PXA_SHARPSL
496 select PXA27x
497 select PXA_SHARP_Cxx00
498
499config MACH_BORZOI
500 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
501 depends on PXA_SHARPSL
502 select PXA27x
503 select PXA_SHARP_Cxx00
504
505config MACH_TOSA
506 bool "Enable Sharp SL-6000x (Tosa) Support"
507 depends on PXA_SHARPSL
508 select PXA25x
509
510config TOSA_BT
511 tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
512 depends on MACH_TOSA && NET
513 select RFKILL
514 help
515 This is a simple driver that is able to control
516 the state of built in bluetooth chip on tosa.
517
518config TOSA_USE_EXT_KEYCODES
519 bool "Tosa keyboard: use extended keycodes"
520 depends on MACH_TOSA
521 help
522 Say Y here to enable the tosa keyboard driver to generate extended
523 (>= 127) keycodes. Be aware, that they can't be correctly interpreted
524 by either console keyboard driver or by Kdrive keybd driver.
525
526 Say Y only if you know, what you are doing!
527
528config MACH_ICONTROL
529 bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
530 select CPU_PXA320
531 select PXA3xx
532
533config ARCH_PXA_ESERIES
534 bool "PXA based Toshiba e-series PDAs"
535 select FB_W100
536 select FB
537 select PXA25x
538
539config MACH_E330
540 bool "Toshiba e330"
541 default y
542 depends on ARCH_PXA_ESERIES
543 help
544 Say Y here if you intend to run this kernel on a Toshiba
545 e330 family PDA.
546
547config MACH_E350
548 bool "Toshiba e350"
549 default y
550 depends on ARCH_PXA_ESERIES
551 help
552 Say Y here if you intend to run this kernel on a Toshiba
553 e350 family PDA.
554
555config MACH_E740
556 bool "Toshiba e740"
557 default y
558 depends on ARCH_PXA_ESERIES
559 help
560 Say Y here if you intend to run this kernel on a Toshiba
561 e740 family PDA.
562
563config MACH_E750
564 bool "Toshiba e750"
565 default y
566 depends on ARCH_PXA_ESERIES
567 help
568 Say Y here if you intend to run this kernel on a Toshiba
569 e750 family PDA.
570
571config MACH_E400
572 bool "Toshiba e400"
573 default y
574 depends on ARCH_PXA_ESERIES
575 help
576 Say Y here if you intend to run this kernel on a Toshiba
577 e400 family PDA.
578
579config MACH_E800
580 bool "Toshiba e800"
581 default y
582 depends on ARCH_PXA_ESERIES
583 help
584 Say Y here if you intend to run this kernel on a Toshiba
585 e800 family PDA.
586
587config MACH_ZIPIT2
588 bool "Zipit Z2 Handheld"
589 select PXA27x
590endmenu
591
592config PXA25x
593 bool
594 select CPU_XSCALE
595 help
596 Select code specific to PXA21x/25x/26x variants
597
598config PXA27x
599 bool
600 select CPU_XSCALE
601 help
602 Select code specific to PXA27x variants
603
604config CPU_PXA26x
605 bool
606 select PXA25x
607 help
608 Select code specific to PXA26x (codename Dalhart)
609
610config PXA3xx
611 bool
612 select CPU_XSC3
613 help
614 Select code specific to PXA3xx variants
615
616config CPU_PXA300
617 bool
618 select PXA3xx
619 help
620 PXA300 (codename Monahans-L)
621
622config CPU_PXA310
623 bool
624 select CPU_PXA300
625 select PXA310_ULPI if USB_ULPI
626 help
627 PXA310 (codename Monahans-LV)
628
629config CPU_PXA320
630 bool
631 select PXA3xx
632 help
633 PXA320 (codename Monahans-P)
634
635config CPU_PXA930
636 bool
637 select PXA3xx
638 help
639 PXA930 (codename Tavor-P)
640
641config CPU_PXA935
642 bool
643 select CPU_PXA930
644 help
645 PXA935 (codename Tavor-P65)
646
647config PXA_SHARP_C7xx
648 bool
649 select SHARPSL_PM
650 help
651 Enable support for all Sharp C7xx models
652
653config PXA_SHARP_Cxx00
654 bool
655 select SHARPSL_PM
656 help
657 Enable common support for Sharp Cxx00 models
658
659config SHARPSL_PM
660 bool
661 select APM_EMULATION
662 select SHARPSL_PM_MAX1111
663
664config SHARPSL_PM_MAX1111
665 bool
666 select HWMON
667 select SENSORS_MAX1111
668 select SPI
669 select SPI_MASTER
670
671config PXA310_ULPI
672 bool
673
674config PXA_SYSTEMS_CPLDS
675 tristate "Motherboard cplds"
676 default ARCH_LUBBOCK || MACH_MAINSTONE
677 help
678 This driver supports the Lubbock and Mainstone multifunction chip
679 found on the pxa25x development platform system (Lubbock) and pxa27x
680 development platform system (Mainstone). This IO board supports the
681 interrupts handling, ethernet controller, flash chips, etc ...
682
683endif