Loading...
Note: File does not exist in v6.13.7.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos3250 based Rinato board device tree source
4 *
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 *
8 * Device tree source file for Samsung's Rinato board which is based on
9 * Samsung Exynos3250 SoC.
10 */
11
12/dts-v1/;
13#include "exynos3250.dtsi"
14#include "exynos4412-ppmu-common.dtsi"
15#include <dt-bindings/input/input.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/clock/samsung,s2mps11.h>
18
19/ {
20 model = "Samsung Rinato board";
21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
22
23 aliases {
24 i2c7 = &i2c_max77836;
25 };
26
27 chosen {
28 stdout-path = &serial_1;
29 };
30
31 memory@40000000 {
32 device_type = "memory";
33 reg = <0x40000000 0x1ff00000>;
34 };
35
36 firmware@205f000 {
37 compatible = "samsung,secure-firmware";
38 reg = <0x0205F000 0x1000>;
39 };
40
41 gpio-keys {
42 compatible = "gpio-keys";
43
44 power-key {
45 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
46 linux,code = <KEY_POWER>;
47 label = "power key";
48 debounce-interval = <10>;
49 wakeup-source;
50 };
51 };
52
53 wlan_pwrseq: mshc1-pwrseq {
54 compatible = "mmc-pwrseq-simple";
55 reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
56 };
57
58 i2c_max77836: i2c-gpio-0 {
59 compatible = "i2c-gpio";
60 sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
61 scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
62 #address-cells = <1>;
63 #size-cells = <0>;
64
65 max77836: pmic@25 {
66 compatible = "maxim,max77836";
67 interrupt-parent = <&gpx1>;
68 interrupts = <5 IRQ_TYPE_NONE>;
69 reg = <0x25>;
70 wakeup-source;
71
72 muic: max77836-muic {
73 compatible = "maxim,max77836-muic";
74 };
75
76 regulators {
77 compatible = "maxim,max77836-regulator";
78 safeout_reg: SAFEOUT {
79 regulator-name = "SAFEOUT";
80 };
81
82 charger_reg: CHARGER {
83 regulator-name = "CHARGER";
84 regulator-min-microamp = <45000>;
85 regulator-max-microamp = <475000>;
86 regulator-boot-on;
87 };
88
89 motor_reg: LDO1 {
90 regulator-name = "MOT_2.7V";
91 regulator-min-microvolt = <1100000>;
92 regulator-max-microvolt = <2700000>;
93 };
94
95 LDO2 {
96 regulator-name = "UNUSED_LDO2";
97 regulator-min-microvolt = <800000>;
98 regulator-max-microvolt = <3950000>;
99 };
100 };
101
102 charger {
103 compatible = "maxim,max77836-charger";
104
105 maxim,constant-uvolt = <4350000>;
106 maxim,fast-charge-uamp = <225000>;
107 maxim,eoc-uamp = <7500>;
108 maxim,ovp-uvolt = <6500000>;
109 };
110 };
111 };
112
113 haptics {
114 compatible = "regulator-haptic";
115 haptic-supply = <&motor_reg>;
116 min-microvolt = <1100000>;
117 max-microvolt = <2700000>;
118 };
119
120 thermal-zones {
121 cpu_thermal: cpu-thermal {
122 cooling-maps {
123 map0 {
124 /* Corresponds to 500MHz */
125 cooling-device = <&cpu0 5 5>,
126 <&cpu1 5 5>;
127 };
128 map1 {
129 /* Corresponds to 200MHz */
130 cooling-device = <&cpu0 8 8>,
131 <&cpu1 8 8>;
132 };
133 };
134 };
135 };
136};
137
138&adc {
139 vdd-supply = <&ldo3_reg>;
140 status = "okay";
141 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
142 assigned-clock-rates = <6000000>;
143
144 thermistor-ap {
145 compatible = "murata,ncp15wb473";
146 pullup-uv = <1800000>;
147 pullup-ohm = <100000>;
148 pulldown-ohm = <100000>;
149 io-channels = <&adc 0>;
150 };
151
152 thermistor-battery {
153 compatible = "murata,ncp15wb473";
154 pullup-uv = <1800000>;
155 pullup-ohm = <100000>;
156 pulldown-ohm = <100000>;
157 io-channels = <&adc 1>;
158 };
159};
160
161&bus_dmc {
162 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
163 vdd-supply = <&buck1_reg>;
164 status = "okay";
165};
166
167&bus_leftbus {
168 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
169 vdd-supply = <&buck3_reg>;
170 status = "okay";
171};
172
173&bus_rightbus {
174 devfreq = <&bus_leftbus>;
175 status = "okay";
176};
177
178&bus_lcd0 {
179 devfreq = <&bus_leftbus>;
180 status = "okay";
181};
182
183&bus_fsys {
184 devfreq = <&bus_leftbus>;
185 status = "okay";
186};
187
188&bus_mcuisp {
189 devfreq = <&bus_leftbus>;
190 status = "okay";
191};
192
193&bus_isp {
194 devfreq = <&bus_leftbus>;
195 status = "okay";
196};
197
198&bus_peril {
199 devfreq = <&bus_leftbus>;
200 status = "okay";
201};
202
203&bus_mfc {
204 devfreq = <&bus_leftbus>;
205 status = "okay";
206};
207
208&cmu {
209 clocks = <&xusbxti>;
210};
211
212&cpu0 {
213 cpu0-supply = <&buck2_reg>;
214};
215
216&exynos_usbphy {
217 status = "okay";
218 vbus-supply = <&safeout_reg>;
219};
220
221&hsotg {
222 vusb_d-supply = <&ldo15_reg>;
223 vusb_a-supply = <&ldo12_reg>;
224 dr_mode = "peripheral";
225 status = "okay";
226};
227
228&dsi_0 {
229 vddcore-supply = <&ldo6_reg>;
230 vddio-supply = <&ldo6_reg>;
231 samsung,burst-clock-frequency = <250000000>;
232 samsung,esc-clock-frequency = <20000000>;
233 samsung,pll-clock-frequency = <24000000>;
234 status = "okay";
235
236 panel@0 {
237 compatible = "samsung,s6e63j0x03";
238 reg = <0>;
239 vdd3-supply = <&ldo16_reg>;
240 vci-supply = <&ldo20_reg>;
241 reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
242 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
243 };
244};
245
246&fimd {
247 status = "okay";
248
249 i80-if-timings {
250 cs-setup = <0>;
251 wr-setup = <0>;
252 wr-act = <1>;
253 wr-hold = <0>;
254 };
255};
256
257&gpu {
258 mali-supply = <&buck3_reg>;
259 status = "okay";
260};
261
262&i2c_0 {
263 #address-cells = <1>;
264 #size-cells = <0>;
265 samsung,i2c-sda-delay = <100>;
266 samsung,i2c-slave-addr = <0x10>;
267 samsung,i2c-max-bus-freq = <100000>;
268 status = "okay";
269
270 pmic@66 {
271 compatible = "samsung,s2mps14-pmic";
272 interrupt-parent = <&gpx0>;
273 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
274 reg = <0x66>;
275 wakeup-source;
276
277 s2mps14_osc: clocks {
278 compatible = "samsung,s2mps14-clk";
279 #clock-cells = <1>;
280 clock-output-names = "s2mps14_ap", "unused",
281 "s2mps14_bt";
282 };
283
284 regulators {
285 ldo1_reg: LDO1 {
286 regulator-name = "VAP_ALIVE_1.0V";
287 regulator-min-microvolt = <1000000>;
288 regulator-max-microvolt = <1000000>;
289 regulator-always-on;
290
291 regulator-state-mem {
292 regulator-on-in-suspend;
293 };
294 };
295
296 ldo2_reg: LDO2 {
297 regulator-name = "VAP_M1_1.2V";
298 regulator-min-microvolt = <1200000>;
299 regulator-max-microvolt = <1200000>;
300 regulator-always-on;
301
302 regulator-state-mem {
303 regulator-off-in-suspend;
304 };
305 };
306
307 ldo3_reg: LDO3 {
308 regulator-name = "VCC_AP_1.8V";
309 regulator-min-microvolt = <1800000>;
310 regulator-max-microvolt = <1800000>;
311 regulator-always-on;
312
313 regulator-state-mem {
314 regulator-off-in-suspend;
315 };
316 };
317
318 ldo4_reg: LDO4 {
319 regulator-name = "VAP_AVDD_PLL1";
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
322 regulator-always-on;
323
324 regulator-state-mem {
325 regulator-off-in-suspend;
326 };
327 };
328
329 ldo5_reg: LDO5 {
330 regulator-name = "VAP_PLL_ISO_1.0V";
331 regulator-min-microvolt = <1000000>;
332 regulator-max-microvolt = <1000000>;
333 regulator-always-on;
334
335 regulator-state-mem {
336 regulator-off-in-suspend;
337 };
338 };
339
340 ldo6_reg: LDO6 {
341 regulator-name = "VAP_VMIPI_1.0V";
342 regulator-min-microvolt = <1000000>;
343 regulator-max-microvolt = <1000000>;
344 regulator-always-on;
345
346 regulator-state-mem {
347 regulator-off-in-suspend;
348 };
349 };
350
351 ldo7_reg: LDO7 {
352 regulator-name = "VAP_AVDD_1.8V";
353 regulator-min-microvolt = <1800000>;
354 regulator-max-microvolt = <1800000>;
355 regulator-always-on;
356
357 regulator-state-mem {
358 regulator-off-in-suspend;
359 };
360 };
361
362 ldo8_reg: LDO8 {
363 regulator-name = "VAP_USB_3.0V";
364 regulator-min-microvolt = <3000000>;
365 regulator-max-microvolt = <3000000>;
366 regulator-always-on;
367
368 regulator-state-mem {
369 regulator-off-in-suspend;
370 };
371 };
372
373 ldo9_reg: LDO9 {
374 regulator-name = "V_LPDDR_1.2V";
375 regulator-min-microvolt = <1200000>;
376 regulator-max-microvolt = <1200000>;
377 regulator-always-on;
378
379 regulator-state-mem {
380 regulator-on-in-suspend;
381 };
382 };
383
384 ldo10_reg: LDO10 {
385 regulator-name = "UNUSED_LDO10";
386 regulator-min-microvolt = <1000000>;
387 regulator-max-microvolt = <1000000>;
388
389 regulator-state-mem {
390 regulator-off-in-suspend;
391 };
392 };
393
394 ldo11_reg: LDO11 {
395 regulator-name = "V_EMMC_1.8V";
396 regulator-min-microvolt = <1800000>;
397 regulator-max-microvolt = <1800000>;
398 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
399 };
400
401 ldo12_reg: LDO12 {
402 regulator-name = "V_EMMC_2.8V";
403 regulator-min-microvolt = <2800000>;
404 regulator-max-microvolt = <2800000>;
405 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
406 };
407
408 ldo13_reg: LDO13 {
409 regulator-name = "CAM_AVDD_2.8V";
410 regulator-min-microvolt = <2800000>;
411 regulator-max-microvolt = <2800000>;
412
413 regulator-state-mem {
414 regulator-off-in-suspend;
415 };
416 };
417
418 ldo14_reg: LDO14 {
419 regulator-name = "UNUSED_LDO14";
420 regulator-min-microvolt = <2700000>;
421 regulator-max-microvolt = <2700000>;
422
423 regulator-state-mem {
424 regulator-off-in-suspend;
425 };
426 };
427
428 ldo15_reg: LDO15 {
429 regulator-name = "TSP_AVDD_3.3V";
430 regulator-min-microvolt = <3300000>;
431 regulator-max-microvolt = <3300000>;
432
433 regulator-state-mem {
434 regulator-off-in-suspend;
435 };
436 };
437
438 ldo16_reg: LDO16 {
439 regulator-name = "LCD_VDD_3.3V";
440 regulator-min-microvolt = <3300000>;
441 regulator-max-microvolt = <3300000>;
442
443 regulator-state-mem {
444 regulator-off-in-suspend;
445 };
446 };
447
448 ldo17_reg: LDO17 {
449 regulator-name = "V_IRLED_3.3V";
450 regulator-min-microvolt = <3300000>;
451 regulator-max-microvolt = <3300000>;
452
453 regulator-state-mem {
454 regulator-off-in-suspend;
455 };
456 };
457
458 ldo18_reg: LDO18 {
459 regulator-name = "CAM_AF_2.8V";
460 regulator-min-microvolt = <2800000>;
461 regulator-max-microvolt = <2800000>;
462
463 regulator-state-mem {
464 regulator-off-in-suspend;
465 };
466 };
467
468 ldo19_reg: LDO19 {
469 regulator-name = "TSP_VDD_1.8V";
470 regulator-min-microvolt = <1800000>;
471 regulator-max-microvolt = <1800000>;
472
473 regulator-state-mem {
474 regulator-off-in-suspend;
475 };
476 };
477
478 ldo20_reg: LDO20 {
479 regulator-name = "LCD_VDD_1.8V";
480 regulator-min-microvolt = <1800000>;
481 regulator-max-microvolt = <1800000>;
482
483 regulator-state-mem {
484 regulator-off-in-suspend;
485 };
486 };
487
488 ldo21_reg: LDO21 {
489 regulator-name = "CAM_IO_1.8V";
490 regulator-min-microvolt = <1800000>;
491 regulator-max-microvolt = <1800000>;
492
493 regulator-state-mem {
494 regulator-off-in-suspend;
495 };
496 };
497
498 ldo22_reg: LDO22 {
499 regulator-name = "CAM_DVDD_1.2V";
500 regulator-min-microvolt = <1200000>;
501 regulator-max-microvolt = <1200000>;
502
503 regulator-state-mem {
504 regulator-off-in-suspend;
505 };
506 };
507
508 ldo23_reg: LDO23 {
509 regulator-name = "HRM_VCC_1.8V";
510 regulator-min-microvolt = <1800000>;
511 regulator-max-microvolt = <1800000>;
512 regulator-always-on;
513 };
514
515 ldo24_reg: LDO24 {
516 regulator-name = "HRM_VCC_3.3V";
517 regulator-min-microvolt = <3000000>;
518 regulator-max-microvolt = <3000000>;
519
520 regulator-state-mem {
521 regulator-off-in-suspend;
522 };
523 };
524
525 ldo25_reg: LDO25 {
526 regulator-name = "UNUSED_LDO25";
527 regulator-min-microvolt = <3000000>;
528 regulator-max-microvolt = <3000000>;
529
530 regulator-state-mem {
531 regulator-off-in-suspend;
532 };
533 };
534
535 buck1_reg: BUCK1 {
536 regulator-name = "VAP_MIF_1.0V";
537 regulator-min-microvolt = <800000>;
538 regulator-max-microvolt = <900000>;
539 regulator-always-on;
540
541 regulator-state-mem {
542 regulator-off-in-suspend;
543 };
544 };
545
546 buck2_reg: BUCK2 {
547 regulator-name = "VAP_ARM_1.0V";
548 regulator-min-microvolt = <850000>;
549 regulator-max-microvolt = <1150000>;
550 regulator-always-on;
551
552 regulator-state-mem {
553 regulator-off-in-suspend;
554 };
555 };
556
557 buck3_reg: BUCK3 {
558 regulator-name = "VAP_INT3D_1.0V";
559 regulator-min-microvolt = <850000>;
560 regulator-max-microvolt = <1000000>;
561 regulator-always-on;
562
563 regulator-state-mem {
564 regulator-off-in-suspend;
565 };
566 };
567
568 buck4_reg: BUCK4 {
569 regulator-name = "VCC_SUB_1.95V";
570 regulator-min-microvolt = <1950000>;
571 regulator-max-microvolt = <1950000>;
572 regulator-always-on;
573
574 regulator-state-mem {
575 regulator-on-in-suspend;
576 };
577 };
578
579 buck5_reg: BUCK5 {
580 regulator-name = "VCC_SUB_1.35V";
581 regulator-min-microvolt = <1350000>;
582 regulator-max-microvolt = <1350000>;
583 regulator-always-on;
584
585 regulator-state-mem {
586 regulator-on-in-suspend;
587 };
588 };
589 };
590 };
591};
592
593&i2c_1 {
594 #address-cells = <1>;
595 #size-cells = <0>;
596 samsung,i2c-sda-delay = <100>;
597 samsung,i2c-slave-addr = <0x10>;
598 samsung,i2c-max-bus-freq = <400000>;
599 status = "okay";
600
601 fuelgauge@36 {
602 compatible = "maxim,max77836-battery";
603 interrupt-parent = <&gpx1>;
604 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
605 reg = <0x36>;
606 };
607};
608
609&i2s2 {
610 status = "okay";
611};
612
613&jpeg {
614 status = "okay";
615};
616
617&mshc_0 {
618 broken-cd;
619 non-removable;
620 cap-mmc-highspeed;
621 desc-num = <4>;
622 mmc-hs200-1_8v;
623 card-detect-delay = <200>;
624 vmmc-supply = <&ldo12_reg>;
625 clock-frequency = <100000000>;
626 max-frequency = <100000000>;
627 samsung,dw-mshc-ciu-div = <1>;
628 samsung,dw-mshc-sdr-timing = <0 1>;
629 samsung,dw-mshc-ddr-timing = <1 2>;
630 pinctrl-names = "default";
631 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
632 bus-width = <8>;
633 status = "okay";
634};
635
636&mshc_1 {
637 status = "okay";
638
639 #address-cells = <1>;
640 #size-cells = <0>;
641
642 non-removable;
643 cap-sd-highspeed;
644 cap-sdio-irq;
645 keep-power-in-suspend;
646 samsung,dw-mshc-ciu-div = <1>;
647 samsung,dw-mshc-sdr-timing = <0 1>;
648 samsung,dw-mshc-ddr-timing = <1 2>;
649 pinctrl-names = "default";
650 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
651 bus-width = <4>;
652
653 mmc-pwrseq = <&wlan_pwrseq>;
654
655 brcmf: wifi@1 {
656 compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
657 reg = <1>;
658
659 interrupt-parent = <&gpx1>;
660 interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
661 interrupt-names = "host-wake";
662 };
663};
664
665&serial_0 {
666 assigned-clocks = <&cmu CLK_SCLK_UART0>;
667 assigned-clock-rates = <100000000>;
668 status = "okay";
669
670 bluetooth {
671 compatible = "brcm,bcm4330-bt";
672 max-speed = <3000000>;
673 shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
674 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
675 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
676 clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
677 };
678};
679
680&serial_1 {
681 status = "okay";
682};
683
684&tmu {
685 vtmu-supply = <&ldo7_reg>;
686 status = "okay";
687};
688
689&rtc {
690 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
691 clock-names = "rtc", "rtc_src";
692 status = "okay";
693};
694
695&xusbxti {
696 clock-frequency = <24000000>;
697};
698
699&pinctrl_0 {
700 pinctrl-names = "default";
701 pinctrl-0 = <&initial0 &sleep0>;
702
703 initial0: initial-state {
704 PIN_IN(gpa1-4, DOWN, LV1);
705 PIN_IN(gpa1-5, DOWN, LV1);
706
707 PIN_IN(gpc0-0, DOWN, LV1);
708 PIN_IN(gpc0-1, DOWN, LV1);
709 PIN_IN(gpc0-2, DOWN, LV1);
710 PIN_IN(gpc0-3, DOWN, LV1);
711 PIN_IN(gpc0-4, DOWN, LV1);
712
713 PIN_IN(gpd0-0, DOWN, LV1);
714 PIN_IN(gpd0-1, DOWN, LV1);
715 };
716
717 sleep0: sleep-state {
718 PIN_SLP(gpa0-0, INPUT, DOWN);
719 PIN_SLP(gpa0-1, INPUT, DOWN);
720 PIN_SLP(gpa0-2, INPUT, DOWN);
721 PIN_SLP(gpa0-3, INPUT, DOWN);
722 PIN_SLP(gpa0-4, INPUT, DOWN);
723 PIN_SLP(gpa0-5, INPUT, DOWN);
724 PIN_SLP(gpa0-6, INPUT, DOWN);
725 PIN_SLP(gpa0-7, INPUT, DOWN);
726
727 PIN_SLP(gpa1-0, INPUT, DOWN);
728 PIN_SLP(gpa1-1, INPUT, DOWN);
729 PIN_SLP(gpa1-2, INPUT, DOWN);
730 PIN_SLP(gpa1-3, INPUT, DOWN);
731 PIN_SLP(gpa1-4, INPUT, DOWN);
732 PIN_SLP(gpa1-5, INPUT, DOWN);
733
734 PIN_SLP(gpb-0, PREV, NONE);
735 PIN_SLP(gpb-1, PREV, NONE);
736 PIN_SLP(gpb-2, PREV, NONE);
737 PIN_SLP(gpb-3, PREV, NONE);
738 PIN_SLP(gpb-4, INPUT, DOWN);
739 PIN_SLP(gpb-5, INPUT, DOWN);
740 PIN_SLP(gpb-6, INPUT, DOWN);
741 PIN_SLP(gpb-7, INPUT, DOWN);
742
743 PIN_SLP(gpc0-0, INPUT, DOWN);
744 PIN_SLP(gpc0-1, INPUT, DOWN);
745 PIN_SLP(gpc0-2, INPUT, DOWN);
746 PIN_SLP(gpc0-3, INPUT, DOWN);
747 PIN_SLP(gpc0-4, INPUT, DOWN);
748
749 PIN_SLP(gpc1-0, INPUT, DOWN);
750 PIN_SLP(gpc1-1, INPUT, DOWN);
751 PIN_SLP(gpc1-2, INPUT, DOWN);
752 PIN_SLP(gpc1-3, INPUT, DOWN);
753 PIN_SLP(gpc1-4, INPUT, DOWN);
754
755 PIN_SLP(gpd0-0, INPUT, DOWN);
756 PIN_SLP(gpd0-1, INPUT, DOWN);
757 PIN_SLP(gpd0-2, INPUT, NONE);
758 PIN_SLP(gpd0-3, INPUT, NONE);
759
760 PIN_SLP(gpd1-0, INPUT, NONE);
761 PIN_SLP(gpd1-1, INPUT, NONE);
762 PIN_SLP(gpd1-2, INPUT, NONE);
763 PIN_SLP(gpd1-3, INPUT, NONE);
764 };
765};
766
767&pinctrl_1 {
768 pinctrl-names = "default";
769 pinctrl-0 = <&initial1 &sleep1>;
770
771 initial1: initial-state {
772 PIN_IN(gpe0-6, DOWN, LV1);
773 PIN_IN(gpe0-7, DOWN, LV1);
774
775 PIN_IN(gpe1-0, DOWN, LV1);
776 PIN_IN(gpe1-3, DOWN, LV1);
777 PIN_IN(gpe1-4, DOWN, LV1);
778 PIN_IN(gpe1-5, DOWN, LV1);
779 PIN_IN(gpe1-6, DOWN, LV1);
780
781 PIN_IN(gpk2-0, DOWN, LV1);
782 PIN_IN(gpk2-1, DOWN, LV1);
783 PIN_IN(gpk2-2, DOWN, LV1);
784 PIN_IN(gpk2-3, DOWN, LV1);
785 PIN_IN(gpk2-4, DOWN, LV1);
786 PIN_IN(gpk2-5, DOWN, LV1);
787 PIN_IN(gpk2-6, DOWN, LV1);
788
789 PIN_IN(gpm0-0, DOWN, LV1);
790 PIN_IN(gpm0-1, DOWN, LV1);
791 PIN_IN(gpm0-2, DOWN, LV1);
792 PIN_IN(gpm0-3, DOWN, LV1);
793 PIN_IN(gpm0-4, DOWN, LV1);
794 PIN_IN(gpm0-5, DOWN, LV1);
795 PIN_IN(gpm0-6, DOWN, LV1);
796 PIN_IN(gpm0-7, DOWN, LV1);
797
798 PIN_IN(gpm1-0, DOWN, LV1);
799 PIN_IN(gpm1-1, DOWN, LV1);
800 PIN_IN(gpm1-2, DOWN, LV1);
801 PIN_IN(gpm1-3, DOWN, LV1);
802 PIN_IN(gpm1-4, DOWN, LV1);
803 PIN_IN(gpm1-5, DOWN, LV1);
804 PIN_IN(gpm1-6, DOWN, LV1);
805
806 PIN_IN(gpm2-0, DOWN, LV1);
807 PIN_IN(gpm2-1, DOWN, LV1);
808
809 PIN_IN(gpm3-0, DOWN, LV1);
810 PIN_IN(gpm3-1, DOWN, LV1);
811 PIN_IN(gpm3-2, DOWN, LV1);
812 PIN_IN(gpm3-3, DOWN, LV1);
813 PIN_IN(gpm3-4, DOWN, LV1);
814
815 PIN_IN(gpm4-1, DOWN, LV1);
816 PIN_IN(gpm4-2, DOWN, LV1);
817 PIN_IN(gpm4-3, DOWN, LV1);
818 PIN_IN(gpm4-4, DOWN, LV1);
819 PIN_IN(gpm4-5, DOWN, LV1);
820 PIN_IN(gpm4-6, DOWN, LV1);
821 PIN_IN(gpm4-7, DOWN, LV1);
822 };
823
824 sleep1: sleep-state {
825 PIN_SLP(gpe0-0, PREV, NONE);
826 PIN_SLP(gpe0-1, PREV, NONE);
827 PIN_SLP(gpe0-2, INPUT, DOWN);
828 PIN_SLP(gpe0-3, INPUT, UP);
829 PIN_SLP(gpe0-4, INPUT, DOWN);
830 PIN_SLP(gpe0-5, INPUT, DOWN);
831 PIN_SLP(gpe0-6, INPUT, DOWN);
832 PIN_SLP(gpe0-7, INPUT, DOWN);
833
834 PIN_SLP(gpe1-0, INPUT, DOWN);
835 PIN_SLP(gpe1-1, PREV, NONE);
836 PIN_SLP(gpe1-2, INPUT, DOWN);
837 PIN_SLP(gpe1-3, INPUT, DOWN);
838 PIN_SLP(gpe1-4, INPUT, DOWN);
839 PIN_SLP(gpe1-5, INPUT, DOWN);
840 PIN_SLP(gpe1-6, INPUT, DOWN);
841 PIN_SLP(gpe1-7, INPUT, NONE);
842
843 PIN_SLP(gpe2-0, INPUT, NONE);
844 PIN_SLP(gpe2-1, INPUT, NONE);
845 PIN_SLP(gpe2-2, INPUT, NONE);
846
847 PIN_SLP(gpk0-0, INPUT, DOWN);
848 PIN_SLP(gpk0-1, INPUT, DOWN);
849 PIN_SLP(gpk0-2, OUT0, NONE);
850 PIN_SLP(gpk0-3, INPUT, DOWN);
851 PIN_SLP(gpk0-4, INPUT, DOWN);
852 PIN_SLP(gpk0-5, INPUT, DOWN);
853 PIN_SLP(gpk0-6, INPUT, DOWN);
854 PIN_SLP(gpk0-7, INPUT, DOWN);
855
856 PIN_SLP(gpk1-0, INPUT, DOWN);
857 PIN_SLP(gpk1-1, INPUT, DOWN);
858 PIN_SLP(gpk1-2, INPUT, DOWN);
859 PIN_SLP(gpk1-3, INPUT, DOWN);
860 PIN_SLP(gpk1-4, INPUT, DOWN);
861 PIN_SLP(gpk1-5, INPUT, DOWN);
862 PIN_SLP(gpk1-6, INPUT, DOWN);
863
864 PIN_SLP(gpk2-0, INPUT, DOWN);
865 PIN_SLP(gpk2-1, INPUT, DOWN);
866 PIN_SLP(gpk2-2, INPUT, DOWN);
867 PIN_SLP(gpk2-3, INPUT, DOWN);
868 PIN_SLP(gpk2-4, INPUT, DOWN);
869 PIN_SLP(gpk2-5, INPUT, DOWN);
870 PIN_SLP(gpk2-6, INPUT, DOWN);
871
872 PIN_SLP(gpl0-0, INPUT, DOWN);
873 PIN_SLP(gpl0-1, INPUT, DOWN);
874 PIN_SLP(gpl0-2, INPUT, DOWN);
875 PIN_SLP(gpl0-3, INPUT, DOWN);
876
877 PIN_SLP(gpm0-0, INPUT, DOWN);
878 PIN_SLP(gpm0-1, INPUT, DOWN);
879 PIN_SLP(gpm0-2, INPUT, DOWN);
880 PIN_SLP(gpm0-3, INPUT, DOWN);
881 PIN_SLP(gpm0-4, INPUT, DOWN);
882 PIN_SLP(gpm0-5, INPUT, DOWN);
883 PIN_SLP(gpm0-6, INPUT, DOWN);
884 PIN_SLP(gpm0-7, INPUT, DOWN);
885
886 PIN_SLP(gpm1-0, INPUT, DOWN);
887 PIN_SLP(gpm1-1, INPUT, DOWN);
888 PIN_SLP(gpm1-2, INPUT, DOWN);
889 PIN_SLP(gpm1-3, INPUT, DOWN);
890 PIN_SLP(gpm1-4, INPUT, DOWN);
891 PIN_SLP(gpm1-5, INPUT, DOWN);
892 PIN_SLP(gpm1-6, INPUT, DOWN);
893
894 PIN_SLP(gpm2-0, INPUT, DOWN);
895 PIN_SLP(gpm2-1, INPUT, DOWN);
896 PIN_SLP(gpm2-2, INPUT, DOWN);
897 PIN_SLP(gpm2-3, INPUT, DOWN);
898 PIN_SLP(gpm2-4, INPUT, DOWN);
899
900 PIN_SLP(gpm3-0, INPUT, DOWN);
901 PIN_SLP(gpm3-1, INPUT, DOWN);
902 PIN_SLP(gpm3-2, INPUT, DOWN);
903 PIN_SLP(gpm3-3, INPUT, DOWN);
904 PIN_SLP(gpm3-4, INPUT, DOWN);
905 PIN_SLP(gpm3-5, INPUT, DOWN);
906 PIN_SLP(gpm3-6, INPUT, DOWN);
907 PIN_SLP(gpm3-7, INPUT, DOWN);
908
909 PIN_SLP(gpm4-0, INPUT, DOWN);
910 PIN_SLP(gpm4-1, INPUT, DOWN);
911 PIN_SLP(gpm4-2, INPUT, DOWN);
912 PIN_SLP(gpm4-3, INPUT, DOWN);
913 PIN_SLP(gpm4-4, INPUT, DOWN);
914 PIN_SLP(gpm4-5, INPUT, DOWN);
915 PIN_SLP(gpm4-6, INPUT, DOWN);
916 PIN_SLP(gpm4-7, INPUT, DOWN);
917 };
918};