Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * ASIX AX8817X based USB 2.0 Ethernet Devices
4 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
5 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
6 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
7 * Copyright (c) 2002-2003 TiVo Inc.
8 */
9
10#include "asix.h"
11
12#define AX_HOST_EN_RETRIES 30
13
14int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
15 u16 size, void *data, int in_pm)
16{
17 int ret;
18 int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
19
20 BUG_ON(!dev);
21
22 if (!in_pm)
23 fn = usbnet_read_cmd;
24 else
25 fn = usbnet_read_cmd_nopm;
26
27 ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
28 value, index, data, size);
29
30 if (unlikely(ret < size)) {
31 ret = ret < 0 ? ret : -ENODATA;
32
33 netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
34 index, ret);
35 }
36
37 return ret;
38}
39
40int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
41 u16 size, void *data, int in_pm)
42{
43 int ret;
44 int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
45
46 BUG_ON(!dev);
47
48 if (!in_pm)
49 fn = usbnet_write_cmd;
50 else
51 fn = usbnet_write_cmd_nopm;
52
53 ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
54 value, index, data, size);
55
56 if (unlikely(ret < 0))
57 netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
58 index, ret);
59
60 return ret;
61}
62
63void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
64 u16 size, void *data)
65{
66 usbnet_write_cmd_async(dev, cmd,
67 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
68 value, index, data, size);
69}
70
71static int asix_set_sw_mii(struct usbnet *dev, int in_pm)
72{
73 int ret;
74
75 ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
76
77 if (ret < 0)
78 netdev_err(dev->net, "Failed to enable software MII access\n");
79 return ret;
80}
81
82static int asix_set_hw_mii(struct usbnet *dev, int in_pm)
83{
84 int ret;
85
86 ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
87 if (ret < 0)
88 netdev_err(dev->net, "Failed to enable hardware MII access\n");
89 return ret;
90}
91
92static int asix_check_host_enable(struct usbnet *dev, int in_pm)
93{
94 int i, ret;
95 u8 smsr;
96
97 for (i = 0; i < AX_HOST_EN_RETRIES; ++i) {
98 ret = asix_set_sw_mii(dev, in_pm);
99 if (ret == -ENODEV || ret == -ETIMEDOUT)
100 break;
101 usleep_range(1000, 1100);
102 ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
103 0, 0, 1, &smsr, in_pm);
104 if (ret == -ENODEV)
105 break;
106 else if (ret < 0)
107 continue;
108 else if (smsr & AX_HOST_EN)
109 break;
110 }
111
112 return i >= AX_HOST_EN_RETRIES ? -ETIMEDOUT : ret;
113}
114
115static void reset_asix_rx_fixup_info(struct asix_rx_fixup_info *rx)
116{
117 /* Reset the variables that have a lifetime outside of
118 * asix_rx_fixup_internal() so that future processing starts from a
119 * known set of initial conditions.
120 */
121
122 if (rx->ax_skb) {
123 /* Discard any incomplete Ethernet frame in the netdev buffer */
124 kfree_skb(rx->ax_skb);
125 rx->ax_skb = NULL;
126 }
127
128 /* Assume the Data header 32-bit word is at the start of the current
129 * or next URB socket buffer so reset all the state variables.
130 */
131 rx->remaining = 0;
132 rx->split_head = false;
133 rx->header = 0;
134}
135
136int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
137 struct asix_rx_fixup_info *rx)
138{
139 int offset = 0;
140 u16 size;
141
142 /* When an Ethernet frame spans multiple URB socket buffers,
143 * do a sanity test for the Data header synchronisation.
144 * Attempt to detect the situation of the previous socket buffer having
145 * been truncated or a socket buffer was missing. These situations
146 * cause a discontinuity in the data stream and therefore need to avoid
147 * appending bad data to the end of the current netdev socket buffer.
148 * Also avoid unnecessarily discarding a good current netdev socket
149 * buffer.
150 */
151 if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
152 offset = ((rx->remaining + 1) & 0xfffe);
153 rx->header = get_unaligned_le32(skb->data + offset);
154 offset = 0;
155
156 size = (u16)(rx->header & 0x7ff);
157 if (size != ((~rx->header >> 16) & 0x7ff)) {
158 netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n",
159 rx->remaining);
160 reset_asix_rx_fixup_info(rx);
161 }
162 }
163
164 while (offset + sizeof(u16) <= skb->len) {
165 u16 copy_length;
166
167 if (!rx->remaining) {
168 if (skb->len - offset == sizeof(u16)) {
169 rx->header = get_unaligned_le16(
170 skb->data + offset);
171 rx->split_head = true;
172 offset += sizeof(u16);
173 break;
174 }
175
176 if (rx->split_head == true) {
177 rx->header |= (get_unaligned_le16(
178 skb->data + offset) << 16);
179 rx->split_head = false;
180 offset += sizeof(u16);
181 } else {
182 rx->header = get_unaligned_le32(skb->data +
183 offset);
184 offset += sizeof(u32);
185 }
186
187 /* take frame length from Data header 32-bit word */
188 size = (u16)(rx->header & 0x7ff);
189 if (size != ((~rx->header >> 16) & 0x7ff)) {
190 netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
191 rx->header, offset);
192 reset_asix_rx_fixup_info(rx);
193 return 0;
194 }
195 if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
196 netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
197 size);
198 reset_asix_rx_fixup_info(rx);
199 return 0;
200 }
201
202 /* Sometimes may fail to get a netdev socket buffer but
203 * continue to process the URB socket buffer so that
204 * synchronisation of the Ethernet frame Data header
205 * word is maintained.
206 */
207 rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
208
209 rx->remaining = size;
210 }
211
212 if (rx->remaining > skb->len - offset) {
213 copy_length = skb->len - offset;
214 rx->remaining -= copy_length;
215 } else {
216 copy_length = rx->remaining;
217 rx->remaining = 0;
218 }
219
220 if (rx->ax_skb) {
221 skb_put_data(rx->ax_skb, skb->data + offset,
222 copy_length);
223 if (!rx->remaining) {
224 usbnet_skb_return(dev, rx->ax_skb);
225 rx->ax_skb = NULL;
226 }
227 }
228
229 offset += (copy_length + 1) & 0xfffe;
230 }
231
232 if (skb->len != offset) {
233 netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
234 skb->len, offset);
235 reset_asix_rx_fixup_info(rx);
236 return 0;
237 }
238
239 return 1;
240}
241
242int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
243{
244 struct asix_common_private *dp = dev->driver_priv;
245 struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
246
247 return asix_rx_fixup_internal(dev, skb, rx);
248}
249
250void asix_rx_fixup_common_free(struct asix_common_private *dp)
251{
252 struct asix_rx_fixup_info *rx;
253
254 if (!dp)
255 return;
256
257 rx = &dp->rx_fixup_info;
258
259 if (rx->ax_skb) {
260 kfree_skb(rx->ax_skb);
261 rx->ax_skb = NULL;
262 }
263}
264
265struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
266 gfp_t flags)
267{
268 int padlen;
269 int headroom = skb_headroom(skb);
270 int tailroom = skb_tailroom(skb);
271 u32 packet_len;
272 u32 padbytes = 0xffff0000;
273 void *ptr;
274
275 padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
276
277 /* We need to push 4 bytes in front of frame (packet_len)
278 * and maybe add 4 bytes after the end (if padlen is 4)
279 *
280 * Avoid skb_copy_expand() expensive call, using following rules :
281 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
282 * is false (and if we have 4 bytes of headroom)
283 * - We are allowed to put 4 bytes at tail if skb_cloned()
284 * is false (and if we have 4 bytes of tailroom)
285 *
286 * TCP packets for example are cloned, but __skb_header_release()
287 * was called in tcp stack, allowing us to use headroom for our needs.
288 */
289 if (!skb_header_cloned(skb) &&
290 !(padlen && skb_cloned(skb)) &&
291 headroom + tailroom >= 4 + padlen) {
292 /* following should not happen, but better be safe */
293 if (headroom < 4 ||
294 tailroom < padlen) {
295 skb->data = memmove(skb->head + 4, skb->data, skb->len);
296 skb_set_tail_pointer(skb, skb->len);
297 }
298 } else {
299 struct sk_buff *skb2;
300
301 skb2 = skb_copy_expand(skb, 4, padlen, flags);
302 dev_kfree_skb_any(skb);
303 skb = skb2;
304 if (!skb)
305 return NULL;
306 }
307
308 packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
309 ptr = skb_push(skb, 4);
310 put_unaligned_le32(packet_len, ptr);
311
312 if (padlen) {
313 put_unaligned_le32(padbytes, skb_tail_pointer(skb));
314 skb_put(skb, sizeof(padbytes));
315 }
316
317 usbnet_set_skb_tx_stats(skb, 1, 0);
318 return skb;
319}
320
321int asix_read_phy_addr(struct usbnet *dev, bool internal)
322{
323 int ret, offset;
324 u8 buf[2];
325
326 ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
327 if (ret < 0)
328 goto error;
329
330 if (ret < 2) {
331 ret = -EIO;
332 goto error;
333 }
334
335 offset = (internal ? 1 : 0);
336 ret = buf[offset];
337
338 netdev_dbg(dev->net, "%s PHY address 0x%x\n",
339 internal ? "internal" : "external", ret);
340
341 return ret;
342
343error:
344 netdev_err(dev->net, "Error reading PHY_ID register: %02x\n", ret);
345
346 return ret;
347}
348
349int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
350{
351 int ret;
352
353 ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
354 if (ret < 0)
355 netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
356
357 return ret;
358}
359
360u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
361{
362 __le16 v;
363 int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
364
365 if (ret < 0) {
366 netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
367 goto out;
368 }
369 ret = le16_to_cpu(v);
370out:
371 return ret;
372}
373
374int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
375{
376 int ret;
377
378 netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
379 ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
380 if (ret < 0)
381 netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
382 mode, ret);
383
384 return ret;
385}
386
387u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
388{
389 __le16 v;
390 int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
391 0, 0, 2, &v, in_pm);
392
393 if (ret < 0) {
394 netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
395 ret);
396 return ret; /* TODO: callers not checking for error ret */
397 }
398
399 return le16_to_cpu(v);
400
401}
402
403int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
404{
405 int ret;
406
407 netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
408 ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
409 mode, 0, 0, NULL, in_pm);
410 if (ret < 0)
411 netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
412 mode, ret);
413
414 return ret;
415}
416
417/* set MAC link settings according to information from phylib */
418void asix_adjust_link(struct net_device *netdev)
419{
420 struct phy_device *phydev = netdev->phydev;
421 struct usbnet *dev = netdev_priv(netdev);
422 u16 mode = 0;
423
424 if (phydev->link) {
425 mode = AX88772_MEDIUM_DEFAULT;
426
427 if (phydev->duplex == DUPLEX_HALF)
428 mode &= ~AX_MEDIUM_FD;
429
430 if (phydev->speed != SPEED_100)
431 mode &= ~AX_MEDIUM_PS;
432 }
433
434 asix_write_medium_mode(dev, mode, 0);
435 phy_print_status(phydev);
436 usbnet_link_change(dev, phydev->link, 0);
437}
438
439int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
440{
441 int ret;
442
443 netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
444 ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
445 if (ret < 0)
446 netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
447 value, ret);
448
449 if (sleep)
450 msleep(sleep);
451
452 return ret;
453}
454
455/*
456 * AX88772 & AX88178 have a 16-bit RX_CTL value
457 */
458void asix_set_multicast(struct net_device *net)
459{
460 struct usbnet *dev = netdev_priv(net);
461 struct asix_data *data = (struct asix_data *)&dev->data;
462 u16 rx_ctl = AX_DEFAULT_RX_CTL;
463
464 if (net->flags & IFF_PROMISC) {
465 rx_ctl |= AX_RX_CTL_PRO;
466 } else if (net->flags & IFF_ALLMULTI ||
467 netdev_mc_count(net) > AX_MAX_MCAST) {
468 rx_ctl |= AX_RX_CTL_AMALL;
469 } else if (netdev_mc_empty(net)) {
470 /* just broadcast and directed */
471 } else {
472 /* We use the 20 byte dev->data
473 * for our 8 byte filter buffer
474 * to avoid allocating memory that
475 * is tricky to free later */
476 struct netdev_hw_addr *ha;
477 u32 crc_bits;
478
479 memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
480
481 /* Build the multicast hash filter. */
482 netdev_for_each_mc_addr(ha, net) {
483 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
484 data->multi_filter[crc_bits >> 3] |=
485 1 << (crc_bits & 7);
486 }
487
488 asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
489 AX_MCAST_FILTER_SIZE, data->multi_filter);
490
491 rx_ctl |= AX_RX_CTL_AM;
492 }
493
494 asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
495}
496
497static int __asix_mdio_read(struct net_device *netdev, int phy_id, int loc,
498 bool in_pm)
499{
500 struct usbnet *dev = netdev_priv(netdev);
501 __le16 res;
502 int ret;
503
504 mutex_lock(&dev->phy_mutex);
505
506 ret = asix_check_host_enable(dev, in_pm);
507 if (ret == -ENODEV || ret == -ETIMEDOUT) {
508 mutex_unlock(&dev->phy_mutex);
509 return ret;
510 }
511
512 ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2,
513 &res, in_pm);
514 if (ret < 0)
515 goto out;
516
517 ret = asix_set_hw_mii(dev, in_pm);
518out:
519 mutex_unlock(&dev->phy_mutex);
520
521 netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
522 phy_id, loc, le16_to_cpu(res));
523
524 return ret < 0 ? ret : le16_to_cpu(res);
525}
526
527int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
528{
529 return __asix_mdio_read(netdev, phy_id, loc, false);
530}
531
532static int __asix_mdio_write(struct net_device *netdev, int phy_id, int loc,
533 int val, bool in_pm)
534{
535 struct usbnet *dev = netdev_priv(netdev);
536 __le16 res = cpu_to_le16(val);
537 int ret;
538
539 netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
540 phy_id, loc, val);
541
542 mutex_lock(&dev->phy_mutex);
543
544 ret = asix_check_host_enable(dev, in_pm);
545 if (ret == -ENODEV)
546 goto out;
547
548 ret = asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2,
549 &res, in_pm);
550 if (ret < 0)
551 goto out;
552
553 ret = asix_set_hw_mii(dev, in_pm);
554out:
555 mutex_unlock(&dev->phy_mutex);
556
557 return ret < 0 ? ret : 0;
558}
559
560void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
561{
562 __asix_mdio_write(netdev, phy_id, loc, val, false);
563}
564
565/* MDIO read and write wrappers for phylib */
566int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
567{
568 struct usbnet *priv = bus->priv;
569
570 return __asix_mdio_read(priv->net, phy_id, regnum, false);
571}
572
573int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
574{
575 struct usbnet *priv = bus->priv;
576
577 return __asix_mdio_write(priv->net, phy_id, regnum, val, false);
578}
579
580int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
581{
582 return __asix_mdio_read(netdev, phy_id, loc, true);
583}
584
585void
586asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
587{
588 __asix_mdio_write(netdev, phy_id, loc, val, true);
589}
590
591void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
592{
593 struct usbnet *dev = netdev_priv(net);
594 u8 opt;
595
596 if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
597 0, 0, 1, &opt, 0) < 0) {
598 wolinfo->supported = 0;
599 wolinfo->wolopts = 0;
600 return;
601 }
602 wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
603 wolinfo->wolopts = 0;
604 if (opt & AX_MONITOR_LINK)
605 wolinfo->wolopts |= WAKE_PHY;
606 if (opt & AX_MONITOR_MAGIC)
607 wolinfo->wolopts |= WAKE_MAGIC;
608}
609
610int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
611{
612 struct usbnet *dev = netdev_priv(net);
613 u8 opt = 0;
614
615 if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
616 return -EINVAL;
617
618 if (wolinfo->wolopts & WAKE_PHY)
619 opt |= AX_MONITOR_LINK;
620 if (wolinfo->wolopts & WAKE_MAGIC)
621 opt |= AX_MONITOR_MAGIC;
622
623 if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
624 opt, 0, 0, NULL, 0) < 0)
625 return -EINVAL;
626
627 return 0;
628}
629
630int asix_get_eeprom_len(struct net_device *net)
631{
632 return AX_EEPROM_LEN;
633}
634
635int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
636 u8 *data)
637{
638 struct usbnet *dev = netdev_priv(net);
639 u16 *eeprom_buff;
640 int first_word, last_word;
641 int i;
642
643 if (eeprom->len == 0)
644 return -EINVAL;
645
646 eeprom->magic = AX_EEPROM_MAGIC;
647
648 first_word = eeprom->offset >> 1;
649 last_word = (eeprom->offset + eeprom->len - 1) >> 1;
650
651 eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
652 GFP_KERNEL);
653 if (!eeprom_buff)
654 return -ENOMEM;
655
656 /* ax8817x returns 2 bytes from eeprom on read */
657 for (i = first_word; i <= last_word; i++) {
658 if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
659 &eeprom_buff[i - first_word], 0) < 0) {
660 kfree(eeprom_buff);
661 return -EIO;
662 }
663 }
664
665 memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
666 kfree(eeprom_buff);
667 return 0;
668}
669
670int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
671 u8 *data)
672{
673 struct usbnet *dev = netdev_priv(net);
674 u16 *eeprom_buff;
675 int first_word, last_word;
676 int i;
677 int ret;
678
679 netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
680 eeprom->len, eeprom->offset, eeprom->magic);
681
682 if (eeprom->len == 0)
683 return -EINVAL;
684
685 if (eeprom->magic != AX_EEPROM_MAGIC)
686 return -EINVAL;
687
688 first_word = eeprom->offset >> 1;
689 last_word = (eeprom->offset + eeprom->len - 1) >> 1;
690
691 eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
692 GFP_KERNEL);
693 if (!eeprom_buff)
694 return -ENOMEM;
695
696 /* align data to 16 bit boundaries, read the missing data from
697 the EEPROM */
698 if (eeprom->offset & 1) {
699 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
700 &eeprom_buff[0], 0);
701 if (ret < 0) {
702 netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
703 goto free;
704 }
705 }
706
707 if ((eeprom->offset + eeprom->len) & 1) {
708 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
709 &eeprom_buff[last_word - first_word], 0);
710 if (ret < 0) {
711 netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
712 goto free;
713 }
714 }
715
716 memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
717
718 /* write data to EEPROM */
719 ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
720 if (ret < 0) {
721 netdev_err(net, "Failed to enable EEPROM write\n");
722 goto free;
723 }
724 msleep(20);
725
726 for (i = first_word; i <= last_word; i++) {
727 netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
728 i, eeprom_buff[i - first_word]);
729 ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
730 eeprom_buff[i - first_word], 0, NULL, 0);
731 if (ret < 0) {
732 netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
733 i);
734 goto free;
735 }
736 msleep(20);
737 }
738
739 ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
740 if (ret < 0) {
741 netdev_err(net, "Failed to disable EEPROM write\n");
742 goto free;
743 }
744
745 ret = 0;
746free:
747 kfree(eeprom_buff);
748 return ret;
749}
750
751void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
752{
753 /* Inherit standard device info */
754 usbnet_get_drvinfo(net, info);
755 strscpy(info->driver, DRIVER_NAME, sizeof(info->driver));
756 strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
757}
758
759int asix_set_mac_address(struct net_device *net, void *p)
760{
761 struct usbnet *dev = netdev_priv(net);
762 struct asix_data *data = (struct asix_data *)&dev->data;
763 struct sockaddr *addr = p;
764
765 if (netif_running(net))
766 return -EBUSY;
767 if (!is_valid_ether_addr(addr->sa_data))
768 return -EADDRNOTAVAIL;
769
770 eth_hw_addr_set(net, addr->sa_data);
771
772 /* We use the 20 byte dev->data
773 * for our 6 byte mac buffer
774 * to avoid allocating memory that
775 * is tricky to free later */
776 memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
777 asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
778 data->mac_addr);
779
780 return 0;
781}
1/*
2 * ASIX AX8817X based USB 2.0 Ethernet Devices
3 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
4 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
5 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
6 * Copyright (c) 2002-2003 TiVo Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 */
21
22#include "asix.h"
23
24int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
25 u16 size, void *data)
26{
27 int ret;
28 ret = usbnet_read_cmd(dev, cmd,
29 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
30 value, index, data, size);
31
32 if (ret != size && ret >= 0)
33 return -EINVAL;
34 return ret;
35}
36
37int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
38 u16 size, void *data)
39{
40 return usbnet_write_cmd(dev, cmd,
41 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
42 value, index, data, size);
43}
44
45void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
46 u16 size, void *data)
47{
48 usbnet_write_cmd_async(dev, cmd,
49 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
50 value, index, data, size);
51}
52
53int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
54 struct asix_rx_fixup_info *rx)
55{
56 int offset = 0;
57 u16 size;
58
59 /* When an Ethernet frame spans multiple URB socket buffers,
60 * do a sanity test for the Data header synchronisation.
61 * Attempt to detect the situation of the previous socket buffer having
62 * been truncated or a socket buffer was missing. These situations
63 * cause a discontinuity in the data stream and therefore need to avoid
64 * appending bad data to the end of the current netdev socket buffer.
65 * Also avoid unnecessarily discarding a good current netdev socket
66 * buffer.
67 */
68 if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
69 offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32);
70 rx->header = get_unaligned_le32(skb->data + offset);
71 offset = 0;
72
73 size = (u16)(rx->header & 0x7ff);
74 if (size != ((~rx->header >> 16) & 0x7ff)) {
75 netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n",
76 rx->remaining);
77 if (rx->ax_skb) {
78 kfree_skb(rx->ax_skb);
79 rx->ax_skb = NULL;
80 /* Discard the incomplete netdev Ethernet frame
81 * and assume the Data header is at the start of
82 * the current URB socket buffer.
83 */
84 }
85 rx->remaining = 0;
86 }
87 }
88
89 while (offset + sizeof(u16) <= skb->len) {
90 u16 copy_length;
91 unsigned char *data;
92
93 if (!rx->remaining) {
94 if (skb->len - offset == sizeof(u16)) {
95 rx->header = get_unaligned_le16(
96 skb->data + offset);
97 rx->split_head = true;
98 offset += sizeof(u16);
99 break;
100 }
101
102 if (rx->split_head == true) {
103 rx->header |= (get_unaligned_le16(
104 skb->data + offset) << 16);
105 rx->split_head = false;
106 offset += sizeof(u16);
107 } else {
108 rx->header = get_unaligned_le32(skb->data +
109 offset);
110 offset += sizeof(u32);
111 }
112
113 /* take frame length from Data header 32-bit word */
114 size = (u16)(rx->header & 0x7ff);
115 if (size != ((~rx->header >> 16) & 0x7ff)) {
116 netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
117 rx->header, offset);
118 return 0;
119 }
120 if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
121 netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
122 size);
123 return 0;
124 }
125
126 /* Sometimes may fail to get a netdev socket buffer but
127 * continue to process the URB socket buffer so that
128 * synchronisation of the Ethernet frame Data header
129 * word is maintained.
130 */
131 rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
132
133 rx->remaining = size;
134 }
135
136 if (rx->remaining > skb->len - offset) {
137 copy_length = skb->len - offset;
138 rx->remaining -= copy_length;
139 } else {
140 copy_length = rx->remaining;
141 rx->remaining = 0;
142 }
143
144 if (rx->ax_skb) {
145 data = skb_put(rx->ax_skb, copy_length);
146 memcpy(data, skb->data + offset, copy_length);
147 if (!rx->remaining)
148 usbnet_skb_return(dev, rx->ax_skb);
149 }
150
151 offset += (copy_length + 1) & 0xfffe;
152 }
153
154 if (skb->len != offset) {
155 netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
156 skb->len, offset);
157 return 0;
158 }
159
160 return 1;
161}
162
163int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
164{
165 struct asix_common_private *dp = dev->driver_priv;
166 struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
167
168 return asix_rx_fixup_internal(dev, skb, rx);
169}
170
171struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
172 gfp_t flags)
173{
174 int padlen;
175 int headroom = skb_headroom(skb);
176 int tailroom = skb_tailroom(skb);
177 u32 packet_len;
178 u32 padbytes = 0xffff0000;
179
180 padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
181
182 /* We need to push 4 bytes in front of frame (packet_len)
183 * and maybe add 4 bytes after the end (if padlen is 4)
184 *
185 * Avoid skb_copy_expand() expensive call, using following rules :
186 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
187 * is false (and if we have 4 bytes of headroom)
188 * - We are allowed to put 4 bytes at tail if skb_cloned()
189 * is false (and if we have 4 bytes of tailroom)
190 *
191 * TCP packets for example are cloned, but skb_header_release()
192 * was called in tcp stack, allowing us to use headroom for our needs.
193 */
194 if (!skb_header_cloned(skb) &&
195 !(padlen && skb_cloned(skb)) &&
196 headroom + tailroom >= 4 + padlen) {
197 /* following should not happen, but better be safe */
198 if (headroom < 4 ||
199 tailroom < padlen) {
200 skb->data = memmove(skb->head + 4, skb->data, skb->len);
201 skb_set_tail_pointer(skb, skb->len);
202 }
203 } else {
204 struct sk_buff *skb2;
205
206 skb2 = skb_copy_expand(skb, 4, padlen, flags);
207 dev_kfree_skb_any(skb);
208 skb = skb2;
209 if (!skb)
210 return NULL;
211 }
212
213 packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
214 skb_push(skb, 4);
215 cpu_to_le32s(&packet_len);
216 skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
217
218 if (padlen) {
219 cpu_to_le32s(&padbytes);
220 memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
221 skb_put(skb, sizeof(padbytes));
222 }
223
224 usbnet_set_skb_tx_stats(skb, 1, 0);
225 return skb;
226}
227
228int asix_set_sw_mii(struct usbnet *dev)
229{
230 int ret;
231 ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
232 if (ret < 0)
233 netdev_err(dev->net, "Failed to enable software MII access\n");
234 return ret;
235}
236
237int asix_set_hw_mii(struct usbnet *dev)
238{
239 int ret;
240 ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
241 if (ret < 0)
242 netdev_err(dev->net, "Failed to enable hardware MII access\n");
243 return ret;
244}
245
246int asix_read_phy_addr(struct usbnet *dev, int internal)
247{
248 int offset = (internal ? 1 : 0);
249 u8 buf[2];
250 int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
251
252 netdev_dbg(dev->net, "asix_get_phy_addr()\n");
253
254 if (ret < 0) {
255 netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
256 goto out;
257 }
258 netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
259 *((__le16 *)buf));
260 ret = buf[offset];
261
262out:
263 return ret;
264}
265
266int asix_get_phy_addr(struct usbnet *dev)
267{
268 /* return the address of the internal phy */
269 return asix_read_phy_addr(dev, 1);
270}
271
272
273int asix_sw_reset(struct usbnet *dev, u8 flags)
274{
275 int ret;
276
277 ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
278 if (ret < 0)
279 netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
280
281 return ret;
282}
283
284u16 asix_read_rx_ctl(struct usbnet *dev)
285{
286 __le16 v;
287 int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
288
289 if (ret < 0) {
290 netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
291 goto out;
292 }
293 ret = le16_to_cpu(v);
294out:
295 return ret;
296}
297
298int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
299{
300 int ret;
301
302 netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
303 ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
304 if (ret < 0)
305 netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
306 mode, ret);
307
308 return ret;
309}
310
311u16 asix_read_medium_status(struct usbnet *dev)
312{
313 __le16 v;
314 int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
315
316 if (ret < 0) {
317 netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
318 ret);
319 return ret; /* TODO: callers not checking for error ret */
320 }
321
322 return le16_to_cpu(v);
323
324}
325
326int asix_write_medium_mode(struct usbnet *dev, u16 mode)
327{
328 int ret;
329
330 netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
331 ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
332 if (ret < 0)
333 netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
334 mode, ret);
335
336 return ret;
337}
338
339int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
340{
341 int ret;
342
343 netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
344 ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
345 if (ret < 0)
346 netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
347 value, ret);
348
349 if (sleep)
350 msleep(sleep);
351
352 return ret;
353}
354
355/*
356 * AX88772 & AX88178 have a 16-bit RX_CTL value
357 */
358void asix_set_multicast(struct net_device *net)
359{
360 struct usbnet *dev = netdev_priv(net);
361 struct asix_data *data = (struct asix_data *)&dev->data;
362 u16 rx_ctl = AX_DEFAULT_RX_CTL;
363
364 if (net->flags & IFF_PROMISC) {
365 rx_ctl |= AX_RX_CTL_PRO;
366 } else if (net->flags & IFF_ALLMULTI ||
367 netdev_mc_count(net) > AX_MAX_MCAST) {
368 rx_ctl |= AX_RX_CTL_AMALL;
369 } else if (netdev_mc_empty(net)) {
370 /* just broadcast and directed */
371 } else {
372 /* We use the 20 byte dev->data
373 * for our 8 byte filter buffer
374 * to avoid allocating memory that
375 * is tricky to free later */
376 struct netdev_hw_addr *ha;
377 u32 crc_bits;
378
379 memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
380
381 /* Build the multicast hash filter. */
382 netdev_for_each_mc_addr(ha, net) {
383 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
384 data->multi_filter[crc_bits >> 3] |=
385 1 << (crc_bits & 7);
386 }
387
388 asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
389 AX_MCAST_FILTER_SIZE, data->multi_filter);
390
391 rx_ctl |= AX_RX_CTL_AM;
392 }
393
394 asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
395}
396
397int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
398{
399 struct usbnet *dev = netdev_priv(netdev);
400 __le16 res;
401
402 mutex_lock(&dev->phy_mutex);
403 asix_set_sw_mii(dev);
404 asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
405 (__u16)loc, 2, &res);
406 asix_set_hw_mii(dev);
407 mutex_unlock(&dev->phy_mutex);
408
409 netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
410 phy_id, loc, le16_to_cpu(res));
411
412 return le16_to_cpu(res);
413}
414
415void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
416{
417 struct usbnet *dev = netdev_priv(netdev);
418 __le16 res = cpu_to_le16(val);
419
420 netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
421 phy_id, loc, val);
422 mutex_lock(&dev->phy_mutex);
423 asix_set_sw_mii(dev);
424 asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
425 asix_set_hw_mii(dev);
426 mutex_unlock(&dev->phy_mutex);
427}
428
429void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
430{
431 struct usbnet *dev = netdev_priv(net);
432 u8 opt;
433
434 if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
435 wolinfo->supported = 0;
436 wolinfo->wolopts = 0;
437 return;
438 }
439 wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
440 wolinfo->wolopts = 0;
441 if (opt & AX_MONITOR_LINK)
442 wolinfo->wolopts |= WAKE_PHY;
443 if (opt & AX_MONITOR_MAGIC)
444 wolinfo->wolopts |= WAKE_MAGIC;
445}
446
447int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
448{
449 struct usbnet *dev = netdev_priv(net);
450 u8 opt = 0;
451
452 if (wolinfo->wolopts & WAKE_PHY)
453 opt |= AX_MONITOR_LINK;
454 if (wolinfo->wolopts & WAKE_MAGIC)
455 opt |= AX_MONITOR_MAGIC;
456
457 if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
458 opt, 0, 0, NULL) < 0)
459 return -EINVAL;
460
461 return 0;
462}
463
464int asix_get_eeprom_len(struct net_device *net)
465{
466 return AX_EEPROM_LEN;
467}
468
469int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
470 u8 *data)
471{
472 struct usbnet *dev = netdev_priv(net);
473 u16 *eeprom_buff;
474 int first_word, last_word;
475 int i;
476
477 if (eeprom->len == 0)
478 return -EINVAL;
479
480 eeprom->magic = AX_EEPROM_MAGIC;
481
482 first_word = eeprom->offset >> 1;
483 last_word = (eeprom->offset + eeprom->len - 1) >> 1;
484
485 eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
486 GFP_KERNEL);
487 if (!eeprom_buff)
488 return -ENOMEM;
489
490 /* ax8817x returns 2 bytes from eeprom on read */
491 for (i = first_word; i <= last_word; i++) {
492 if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
493 &(eeprom_buff[i - first_word])) < 0) {
494 kfree(eeprom_buff);
495 return -EIO;
496 }
497 }
498
499 memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
500 kfree(eeprom_buff);
501 return 0;
502}
503
504int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
505 u8 *data)
506{
507 struct usbnet *dev = netdev_priv(net);
508 u16 *eeprom_buff;
509 int first_word, last_word;
510 int i;
511 int ret;
512
513 netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
514 eeprom->len, eeprom->offset, eeprom->magic);
515
516 if (eeprom->len == 0)
517 return -EINVAL;
518
519 if (eeprom->magic != AX_EEPROM_MAGIC)
520 return -EINVAL;
521
522 first_word = eeprom->offset >> 1;
523 last_word = (eeprom->offset + eeprom->len - 1) >> 1;
524
525 eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
526 GFP_KERNEL);
527 if (!eeprom_buff)
528 return -ENOMEM;
529
530 /* align data to 16 bit boundaries, read the missing data from
531 the EEPROM */
532 if (eeprom->offset & 1) {
533 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
534 &(eeprom_buff[0]));
535 if (ret < 0) {
536 netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
537 goto free;
538 }
539 }
540
541 if ((eeprom->offset + eeprom->len) & 1) {
542 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
543 &(eeprom_buff[last_word - first_word]));
544 if (ret < 0) {
545 netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
546 goto free;
547 }
548 }
549
550 memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
551
552 /* write data to EEPROM */
553 ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
554 if (ret < 0) {
555 netdev_err(net, "Failed to enable EEPROM write\n");
556 goto free;
557 }
558 msleep(20);
559
560 for (i = first_word; i <= last_word; i++) {
561 netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
562 i, eeprom_buff[i - first_word]);
563 ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
564 eeprom_buff[i - first_word], 0, NULL);
565 if (ret < 0) {
566 netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
567 i);
568 goto free;
569 }
570 msleep(20);
571 }
572
573 ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
574 if (ret < 0) {
575 netdev_err(net, "Failed to disable EEPROM write\n");
576 goto free;
577 }
578
579 ret = 0;
580free:
581 kfree(eeprom_buff);
582 return ret;
583}
584
585void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
586{
587 /* Inherit standard device info */
588 usbnet_get_drvinfo(net, info);
589 strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver));
590 strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
591}
592
593int asix_set_mac_address(struct net_device *net, void *p)
594{
595 struct usbnet *dev = netdev_priv(net);
596 struct asix_data *data = (struct asix_data *)&dev->data;
597 struct sockaddr *addr = p;
598
599 if (netif_running(net))
600 return -EBUSY;
601 if (!is_valid_ether_addr(addr->sa_data))
602 return -EADDRNOTAVAIL;
603
604 memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
605
606 /* We use the 20 byte dev->data
607 * for our 6 byte mac buffer
608 * to avoid allocating memory that
609 * is tricky to free later */
610 memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
611 asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
612 data->mac_addr);
613
614 return 0;
615}