1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
  2//
  3// Device Tree file for LX2160A-CEx7
  4//
  5// Copyright 2019 SolidRun Ltd.
  6
  7/dts-v1/;
  8
  9#include "fsl-lx2160a.dtsi"
 10
 11/ {
 12	model = "SolidRun LX2160A COM Express Type 7 module";
 13	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
 14
 15	aliases {
 16		crypto = &crypto;
 17	};
 18
 19	sb_3v3: regulator-sb3v3 {
 20		compatible = "regulator-fixed";
 21		regulator-name = "RT7290";
 22		regulator-min-microvolt = <3300000>;
 23		regulator-max-microvolt = <3300000>;
 24		regulator-boot-on;
 25		regulator-always-on;
 26	};
 27};
 28
 29&crypto {
 30	status = "okay";
 31};
 32
 33&dpmac17 {
 34	phy-handle = <&rgmii_phy1>;
 35	phy-connection-type = "rgmii-id";
 36};
 37
 38&emdio1 {
 39	status = "okay";
 40
 41	rgmii_phy1: ethernet-phy@1 {
 42		reg = <1>;
 43		qca,smarteee-tw-us-1g = <24>;
 44	};
 45};
 46
 47&esdhc1 {
 48	mmc-hs200-1_8v;
 49	mmc-hs400-1_8v;
 50	bus-width = <8>;
 51	status = "okay";
 52};
 53
 54&i2c0 {
 55	status = "okay";
 56
 57	i2c-mux@77 {
 58		compatible = "nxp,pca9547";
 59		#address-cells = <1>;
 60		#size-cells = <0>;
 61		reg = <0x77>;
 62
 63		i2c@0 {
 64			#address-cells = <1>;
 65			#size-cells = <0>;
 66			reg = <0>;
 67
 68			eeprom@50 {
 69				compatible = "atmel,24c512";
 70				reg = <0x50>;
 71			};
 72
 73			eeprom@51 {
 74				compatible = "atmel,spd";
 75				reg = <0x51>;
 76			};
 77
 78			eeprom@53 {
 79				compatible = "atmel,spd";
 80				reg = <0x53>;
 81			};
 82
 83			eeprom@57 {
 84				compatible = "atmel,24c02";
 85				reg = <0x57>;
 86			};
 87		};
 88
 89		i2c@1 {
 90			#address-cells = <1>;
 91			#size-cells = <0>;
 92			reg = <1>;
 93
 94			fan-temperature-ctrlr@18 {
 95				compatible = "ti,amc6821";
 96				reg = <0x18>;
 97			};
 98		};
 99
100		i2c@2 {
101			#address-cells = <1>;
102			#size-cells = <0>;
103			reg = <2>;
104
105			regulator@5c {
106				compatible = "lltc,ltc3882";
107				reg = <0x5c>;
108			};
109		};
110
111		i2c@3 {
112			#address-cells = <1>;
113			#size-cells = <0>;
114			reg = <3>;
115
116			temperature-sensor@48 {
117				compatible = "nxp,sa56004";
118				reg = <0x48>;
119				vcc-supply = <&sb_3v3>;
120			};
121		};
122
123		sfp0_i2c: i2c@4 {
124			#address-cells = <1>;
125			#size-cells = <0>;
126			reg = <4>;
127		};
128
129		sfp1_i2c: i2c@5 {
130			#address-cells = <1>;
131			#size-cells = <0>;
132			reg = <5>;
133		};
134
135		sfp2_i2c: i2c@6 {
136			#address-cells = <1>;
137			#size-cells = <0>;
138			reg = <6>;
139		};
140
141		sfp3_i2c: i2c@7 {
142			#address-cells = <1>;
143			#size-cells = <0>;
144			reg = <7>;
145		};
146	};
147};
148
149&i2c2 {
150	status = "okay";
151};
152
153&i2c4 {
154	status = "okay";
155
156	rtc@51 {
157		compatible = "nxp,pcf2129";
158		reg = <0x51>;
159	};
160};
161
162&fspi {
163	status = "okay";
164
165	flash@0 {
166		#address-cells = <1>;
167		#size-cells = <1>;
168		compatible = "micron,m25p80";
169		m25p,fast-read;
170		spi-max-frequency = <50000000>;
171		reg = <0>;
172		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
173		spi-rx-bus-width = <8>;
174		spi-tx-bus-width = <1>;
175	};
176};
177
178&usb0 {
179	status = "okay";
180};
181
182&usb1 {
183	status = "okay";
184};