Loading...
Note: File does not exist in v6.13.7.
1/*
2 * Copyright (C) 2000 Deep Blue Solutions Ltd
3 * Copyright (C) 2002 Shane Nay (shane@minirl.com)
4 * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16#include <linux/gpio/driver.h>
17/* Needed for gpio_to_irq() */
18#include <linux/gpio.h>
19#include <linux/platform_device.h>
20#include <linux/mtd/mtd.h>
21#include <linux/mtd/map.h>
22#include <linux/mtd/partitions.h>
23#include <linux/mtd/physmap.h>
24#include <linux/i2c.h>
25#include <linux/irq.h>
26
27#include <linux/regulator/fixed.h>
28#include <linux/regulator/machine.h>
29
30#include <asm/mach-types.h>
31#include <asm/mach/arch.h>
32#include <asm/mach/time.h>
33#include <asm/mach/map.h>
34
35#include "common.h"
36#include "devices-imx27.h"
37#include "hardware.h"
38#include "iomux-mx27.h"
39
40/*
41 * Base address of PBC controller, CS4
42 */
43#define PBC_BASE_ADDRESS 0xf4300000
44#define PBC_REG_ADDR(offset) (void __force __iomem *) \
45 (PBC_BASE_ADDRESS + (offset))
46
47/* When the PBC address connection is fixed in h/w, defined as 1 */
48#define PBC_ADDR_SH 0
49
50/* Offsets for the PBC Controller register */
51/*
52 * PBC Board version register offset
53 */
54#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
55/*
56 * PBC Board control register 1 set address.
57 */
58#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
59/*
60 * PBC Board control register 1 clear address.
61 */
62#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
63
64/* PBC Board Control Register 1 bit definitions */
65#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
66
67/* to determine the correct external crystal reference */
68#define CKIH_27MHZ_BIT_SET (1 << 3)
69
70static const int mx27ads_pins[] __initconst = {
71 /* UART0 */
72 PE12_PF_UART1_TXD,
73 PE13_PF_UART1_RXD,
74 PE14_PF_UART1_CTS,
75 PE15_PF_UART1_RTS,
76 /* UART1 */
77 PE3_PF_UART2_CTS,
78 PE4_PF_UART2_RTS,
79 PE6_PF_UART2_TXD,
80 PE7_PF_UART2_RXD,
81 /* UART2 */
82 PE8_PF_UART3_TXD,
83 PE9_PF_UART3_RXD,
84 PE10_PF_UART3_CTS,
85 PE11_PF_UART3_RTS,
86 /* UART3 */
87 PB26_AF_UART4_RTS,
88 PB28_AF_UART4_TXD,
89 PB29_AF_UART4_CTS,
90 PB31_AF_UART4_RXD,
91 /* UART4 */
92 PB18_AF_UART5_TXD,
93 PB19_AF_UART5_RXD,
94 PB20_AF_UART5_CTS,
95 PB21_AF_UART5_RTS,
96 /* UART5 */
97 PB10_AF_UART6_TXD,
98 PB12_AF_UART6_CTS,
99 PB11_AF_UART6_RXD,
100 PB13_AF_UART6_RTS,
101 /* FEC */
102 PD0_AIN_FEC_TXD0,
103 PD1_AIN_FEC_TXD1,
104 PD2_AIN_FEC_TXD2,
105 PD3_AIN_FEC_TXD3,
106 PD4_AOUT_FEC_RX_ER,
107 PD5_AOUT_FEC_RXD1,
108 PD6_AOUT_FEC_RXD2,
109 PD7_AOUT_FEC_RXD3,
110 PD8_AF_FEC_MDIO,
111 PD9_AIN_FEC_MDC,
112 PD10_AOUT_FEC_CRS,
113 PD11_AOUT_FEC_TX_CLK,
114 PD12_AOUT_FEC_RXD0,
115 PD13_AOUT_FEC_RX_DV,
116 PD14_AOUT_FEC_RX_CLK,
117 PD15_AOUT_FEC_COL,
118 PD16_AIN_FEC_TX_ER,
119 PF23_AIN_FEC_TX_EN,
120 /* I2C2 */
121 PC5_PF_I2C2_SDA,
122 PC6_PF_I2C2_SCL,
123 /* FB */
124 PA5_PF_LSCLK,
125 PA6_PF_LD0,
126 PA7_PF_LD1,
127 PA8_PF_LD2,
128 PA9_PF_LD3,
129 PA10_PF_LD4,
130 PA11_PF_LD5,
131 PA12_PF_LD6,
132 PA13_PF_LD7,
133 PA14_PF_LD8,
134 PA15_PF_LD9,
135 PA16_PF_LD10,
136 PA17_PF_LD11,
137 PA18_PF_LD12,
138 PA19_PF_LD13,
139 PA20_PF_LD14,
140 PA21_PF_LD15,
141 PA22_PF_LD16,
142 PA23_PF_LD17,
143 PA24_PF_REV,
144 PA25_PF_CLS,
145 PA26_PF_PS,
146 PA27_PF_SPL_SPR,
147 PA28_PF_HSYNC,
148 PA29_PF_VSYNC,
149 PA30_PF_CONTRAST,
150 PA31_PF_OE_ACD,
151 /* OWIRE */
152 PE16_AF_OWIRE,
153 /* SDHC1*/
154 PE18_PF_SD1_D0,
155 PE19_PF_SD1_D1,
156 PE20_PF_SD1_D2,
157 PE21_PF_SD1_D3,
158 PE22_PF_SD1_CMD,
159 PE23_PF_SD1_CLK,
160 /* SDHC2*/
161 PB4_PF_SD2_D0,
162 PB5_PF_SD2_D1,
163 PB6_PF_SD2_D2,
164 PB7_PF_SD2_D3,
165 PB8_PF_SD2_CMD,
166 PB9_PF_SD2_CLK,
167};
168
169static const struct mxc_nand_platform_data
170mx27ads_nand_board_info __initconst = {
171 .width = 1,
172 .hw_ecc = 1,
173};
174
175/* ADS's NOR flash */
176static struct physmap_flash_data mx27ads_flash_data = {
177 .width = 2,
178};
179
180static struct resource mx27ads_flash_resource = {
181 .start = 0xc0000000,
182 .end = 0xc0000000 + 0x02000000 - 1,
183 .flags = IORESOURCE_MEM,
184
185};
186
187static struct platform_device mx27ads_nor_mtd_device = {
188 .name = "physmap-flash",
189 .id = 0,
190 .dev = {
191 .platform_data = &mx27ads_flash_data,
192 },
193 .num_resources = 1,
194 .resource = &mx27ads_flash_resource,
195};
196
197static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
198 .bitrate = 100000,
199};
200
201static struct i2c_board_info mx27ads_i2c_devices[] = {
202};
203
204static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
205{
206 if (value)
207 imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
208 else
209 imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
210}
211
212static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
213{
214 return 0;
215}
216
217#define MX27ADS_LCD_GPIO (6 * 32)
218
219static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
220 REGULATOR_SUPPLY("lcd", "imx-fb.0");
221
222static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
223 .constraints = {
224 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
225},
226 .consumer_supplies = &mx27ads_lcd_regulator_consumer,
227 .num_consumer_supplies = 1,
228};
229
230static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
231 .supply_name = "LCD",
232 .microvolts = 3300000,
233 .gpio = MX27ADS_LCD_GPIO,
234 .init_data = &mx27ads_lcd_regulator_init_data,
235};
236
237static void __init mx27ads_regulator_init(void)
238{
239 struct gpio_chip *vchip;
240
241 vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
242 vchip->owner = THIS_MODULE;
243 vchip->label = "LCD";
244 vchip->base = MX27ADS_LCD_GPIO;
245 vchip->ngpio = 1;
246 vchip->direction_output = vgpio_dir_out;
247 vchip->set = vgpio_set;
248 gpiochip_add_data(vchip, NULL);
249
250 platform_device_register_data(NULL, "reg-fixed-voltage",
251 PLATFORM_DEVID_AUTO,
252 &mx27ads_lcd_regulator_pdata,
253 sizeof(mx27ads_lcd_regulator_pdata));
254}
255
256static struct imx_fb_videomode mx27ads_modes[] = {
257 {
258 .mode = {
259 .name = "Sharp-LQ035Q7",
260 .refresh = 60,
261 .xres = 240,
262 .yres = 320,
263 .pixclock = 188679, /* in ps (5.3MHz) */
264 .hsync_len = 1,
265 .left_margin = 9,
266 .right_margin = 16,
267 .vsync_len = 1,
268 .upper_margin = 7,
269 .lower_margin = 9,
270 },
271 .bpp = 16,
272 .pcr = 0xFB008BC0,
273 },
274};
275
276static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
277 .mode = mx27ads_modes,
278 .num_modes = ARRAY_SIZE(mx27ads_modes),
279
280 /*
281 * - HSYNC active high
282 * - VSYNC active high
283 * - clk notenabled while idle
284 * - clock inverted
285 * - data not inverted
286 * - data enable low active
287 * - enable sharp mode
288 */
289 .pwmr = 0x00A903FF,
290 .lscr1 = 0x00120300,
291 .dmacr = 0x00020010,
292};
293
294static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
295 void *data)
296{
297 return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
298 IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
299}
300
301static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
302 void *data)
303{
304 return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
305 IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
306}
307
308static void mx27ads_sdhc1_exit(struct device *dev, void *data)
309{
310 free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
311}
312
313static void mx27ads_sdhc2_exit(struct device *dev, void *data)
314{
315 free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
316}
317
318static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
319 .init = mx27ads_sdhc1_init,
320 .exit = mx27ads_sdhc1_exit,
321};
322
323static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
324 .init = mx27ads_sdhc2_init,
325 .exit = mx27ads_sdhc2_exit,
326};
327
328static struct platform_device *platform_devices[] __initdata = {
329 &mx27ads_nor_mtd_device,
330};
331
332static const struct imxuart_platform_data uart_pdata __initconst = {
333 .flags = IMXUART_HAVE_RTSCTS,
334};
335
336static void __init mx27ads_board_init(void)
337{
338 imx27_soc_init();
339
340 mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
341 "mx27ads");
342
343 imx27_add_imx_uart0(&uart_pdata);
344 imx27_add_imx_uart1(&uart_pdata);
345 imx27_add_imx_uart2(&uart_pdata);
346 imx27_add_imx_uart3(&uart_pdata);
347 imx27_add_imx_uart4(&uart_pdata);
348 imx27_add_imx_uart5(&uart_pdata);
349 imx27_add_mxc_nand(&mx27ads_nand_board_info);
350
351 /* only the i2c master 1 is used on this CPU card */
352 i2c_register_board_info(1, mx27ads_i2c_devices,
353 ARRAY_SIZE(mx27ads_i2c_devices));
354 imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
355 mx27ads_regulator_init();
356 imx27_add_imx_fb(&mx27ads_fb_data);
357 imx27_add_mxc_mmc(0, &sdhc1_pdata);
358 imx27_add_mxc_mmc(1, &sdhc2_pdata);
359
360 imx27_add_fec(NULL);
361 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
362 imx27_add_mxc_w1();
363}
364
365static void __init mx27ads_timer_init(void)
366{
367 unsigned long fref = 26000000;
368
369 if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
370 fref = 27000000;
371
372 mx27_clocks_init(fref);
373}
374
375static struct map_desc mx27ads_io_desc[] __initdata = {
376 {
377 .virtual = PBC_BASE_ADDRESS,
378 .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
379 .length = SZ_1M,
380 .type = MT_DEVICE,
381 },
382};
383
384static void __init mx27ads_map_io(void)
385{
386 mx27_map_io();
387 iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
388}
389
390MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
391 /* maintainer: Freescale Semiconductor, Inc. */
392 .atag_offset = 0x100,
393 .map_io = mx27ads_map_io,
394 .init_early = imx27_init_early,
395 .init_irq = mx27_init_irq,
396 .init_time = mx27ads_timer_init,
397 .init_machine = mx27ads_board_init,
398 .restart = mxc_restart,
399MACHINE_END