1/dts-v1/;
  2
  3#include "kirkwood.dtsi"
  4#include "kirkwood-6281.dtsi"
  5
  6/ {
  7	model = "MPL CEC4";
  8	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  9
 10        memory {
 11                device_type = "memory";
 12                reg = <0x00000000 0x20000000>;
 13        };
 14
 15	chosen {
 16		bootargs = "console=ttyS0,115200n8 earlyprintk";
 17		stdout-path = &uart0;
 18	};
 19
 20	mbus {
 21		pcie-controller {
 22			status = "okay";
 23
 24			pcie@1,0 {
 25				status = "okay";
 26			};
 27		};
 28	};
 29
 30	ocp@f1000000 {
 31		pinctrl: pin-controller@10000 {
 32			pmx_led_health: pmx-led-health {
 33				marvell,pins = "mpp7";
 34				marvell,function = "gpo";
 35			};
 36
 37			pmx_sata1: pmx-sata1 {
 38				marvell,pins = "mpp34";
 39				marvell,function = "sata1";
 40			};
 41
 42			pmx_sata0: pmx-sata0 {
 43				marvell,pins = "mpp35";
 44				marvell,function = "sata0";
 45			};
 46
 47			pmx_led_user1o: pmx-led-user1o {
 48				marvell,pins = "mpp40";
 49				marvell,function = "gpio";
 50			};
 51
 52			pmx_led_user1g: pmx-led-user1g {
 53				marvell,pins = "mpp41";
 54				marvell,function = "gpio";
 55			};
 56
 57			pmx_led_user0o: pmx-led-user0o {
 58				marvell,pins = "mpp44";
 59				marvell,function = "gpio";
 60			};
 61
 62			pmx_led_user0g: pmx-led-user0g {
 63				marvell,pins = "mpp45";
 64				marvell,function = "gpio";
 65			};
 66
 67			pmx_led_misc: pmx-led-misc {
 68				marvell,pins = "mpp46";
 69				marvell,function = "gpio";
 70			};
 71
 72			pmx_sdio_cd: pmx-sdio-cd {
 73				marvell,pins = "mpp47";
 74				marvell,function = "gpio";
 75			};
 76		};
 77
 78                i2c@11000 {
 79                        status = "okay";
 80
 81			rtc@51 {
 82				compatible = "nxp,pcf8563";
 83				reg = <0x51>;
 84			};
 85
 86			eeprom@57 {
 87				compatible = "atmel,24c02";
 88				reg = <0x57>;
 89			};
 90
 91                };
 92
 93		serial@12000 {
 94			status = "okay";
 95		};
 96
 97		rtc@10300 {
 98			status = "disabled";
 99		};
100
101		sata@80000 {
102			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
103			pinctrl-names = "default";
104			nr-ports = <2>;
105			status = "okay";
106		};
107
108		mvsdio@90000 {
109			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
110			pinctrl-names = "default";
111			status = "okay";
112			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
113			/* No WP GPIO */
114		};
115	};
116
117	gpio-leds {
118		compatible = "gpio-leds";
119		pinctrl-0 = < &pmx_led_health
120			      &pmx_led_user1o
121			      &pmx_led_user1g &pmx_led_user0o
122			      &pmx_led_user0g &pmx_led_misc
123			    >;
124		pinctrl-names = "default";
125
126		health {
127			label = "status:green:health";
128			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
129		};
130
131		user1o {
132			label = "user1:orange";
133			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
134			default-state = "on";
135		};
136
137		user1g {
138			label = "user1:green";
139			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
140			default-state = "on";
141		};
142
143		user0o {
144			label = "user0:orange";
145			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
146			default-state = "on";
147		};
148
149		user0g {
150			label = "user0:green";
151			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
152			default-state = "on";
153		};
154
155		misc {
156			label = "status:orange:misc";
157			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
158			default-state = "on";
159		};
160
161	};
162};
163
164&nand {
165	status = "okay";
166
167	partition@0 {
168		label = "uboot";
169		reg = <0x0000000 0x100000>;
170	};
171
172	partition@100000 {
173		label = "env";
174		reg = <0x100000 0x80000>;
175	};
176
177	partition@180000 {
178		label = "fdt";
179		reg = <0x180000 0x80000>;
180	};
181
182	partition@200000 {
183		label = "kernel";
184		reg = <0x200000 0x400000>;
185	};
186
187	partition@600000 {
188		label = "rootfs";
189		reg = <0x600000 0x1fa00000>;
190	};
191};
192
193&mdio {
194	status = "okay";
195
196	ethphy0: ethernet-phy@1 {
197		reg = <1>;
198	};
199
200	ethphy1: ethernet-phy@2 {
201		reg = <2>;
202	};
203};
204
205&eth0 {
206	status = "okay";
207	ethernet0-port@0 {
208		phy-handle = <&ethphy0>;
209	};
210};
211
212&eth1 {
213	status = "okay";
214	ethernet1-port@0 {
215		phy-handle = <&ethphy1>;
216	};
217};