1/dts-v1/;
  2
  3#include "kirkwood.dtsi"
  4#include "kirkwood-6281.dtsi"
  5
  6/ {
  7	model = "LaCie CloudBox";
  8	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
  9
 10	memory {
 11		device_type = "memory";
 12		reg = <0x00000000 0x10000000>;
 13	};
 14
 15	chosen {
 16		bootargs = "console=ttyS0,115200n8";
 17		stdout-path = &uart0;
 18	};
 19
 20	ocp@f1000000 {
 21		pinctrl: pin-controller@10000 {
 22			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
 23				marvell,pins = "mpp15";
 24				marvell,function = "sata0";
 25			};
 26		};
 27
 28		serial@12000 {
 29			status = "okay";
 30		};
 31
 32		sata@80000 {
 33			pinctrl-0 = <&pmx_cloudbox_sata0>;
 34			pinctrl-names = "default";
 35			status = "okay";
 36			nr-ports = <1>;
 37		};
 38
 39		spi@10600 {
 40			status = "okay";
 41
 42			flash@0 {
 43				#address-cells = <1>;
 44				#size-cells = <1>;
 45				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
 46				reg = <0>;
 47				spi-max-frequency = <20000000>;
 48				mode = <0>;
 49
 50				partition@0 {
 51					reg = <0x0 0x80000>;
 52					label = "u-boot";
 53				};
 54			};
 55		};
 56	};
 57
 58	gpio_keys {
 59		compatible = "gpio-keys";
 60		#address-cells = <1>;
 61		#size-cells = <0>;
 62
 63		button@1 {
 64			label = "Power push button";
 65			linux,code = <KEY_POWER>;
 66			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 67		};
 68	};
 69
 70	gpio-leds {
 71		compatible = "gpio-leds";
 72
 73		red-fail {
 74			label = "cloudbox:red:fail";
 75			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 76		};
 77		blue-sata {
 78			label = "cloudbox:blue:sata";
 79			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 80		};
 81	};
 82
 83	gpio_poweroff {
 84		compatible = "gpio-poweroff";
 85		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 86	};
 87};
 88
 89&mdio {
 90	status = "okay";
 91
 92	ethphy0: ethernet-phy@0 {
 93		reg = <0>;
 94	};
 95};
 96
 97&eth0 {
 98	status = "okay";
 99	ethernet0-port@0 {
100		phy-handle = <&ethphy0>;
101	};
102};