Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * LP5562 LED driver
4 *
5 * Copyright (C) 2013 Texas Instruments
6 *
7 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
8 */
9
10#include <linux/cleanup.h>
11#include <linux/delay.h>
12#include <linux/firmware.h>
13#include <linux/i2c.h>
14#include <linux/leds.h>
15#include <linux/module.h>
16#include <linux/mutex.h>
17#include <linux/of.h>
18#include <linux/platform_data/leds-lp55xx.h>
19#include <linux/slab.h>
20
21#include "leds-lp55xx-common.h"
22
23#define LP5562_MAX_LEDS 4
24
25/* ENABLE Register 00h */
26#define LP5562_REG_ENABLE 0x00
27#define LP5562_EXEC_ENG1_M 0x30
28#define LP5562_EXEC_ENG2_M 0x0C
29#define LP5562_EXEC_ENG3_M 0x03
30#define LP5562_EXEC_M 0x3F
31#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
32#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
33#define LP5562_EXEC_RUN 0x2A
34#define LP5562_ENABLE_DEFAULT \
35 (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
36#define LP5562_ENABLE_RUN_PROGRAM \
37 (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
38
39/* OPMODE Register 01h */
40#define LP5562_REG_OP_MODE 0x01
41
42/* BRIGHTNESS Registers */
43#define LP5562_REG_R_PWM 0x04
44#define LP5562_REG_G_PWM 0x03
45#define LP5562_REG_B_PWM 0x02
46#define LP5562_REG_W_PWM 0x0E
47
48/* CURRENT Registers */
49#define LP5562_REG_R_CURRENT 0x07
50#define LP5562_REG_G_CURRENT 0x06
51#define LP5562_REG_B_CURRENT 0x05
52#define LP5562_REG_W_CURRENT 0x0F
53
54/* CONFIG Register 08h */
55#define LP5562_REG_CONFIG 0x08
56#define LP5562_PWM_HF 0x40
57#define LP5562_PWRSAVE_EN 0x20
58#define LP5562_CLK_INT 0x01 /* Internal clock */
59#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
60
61/* RESET Register 0Dh */
62#define LP5562_REG_RESET 0x0D
63#define LP5562_RESET 0xFF
64
65/* PROGRAM ENGINE Registers */
66#define LP5562_REG_PROG_MEM_ENG1 0x10
67#define LP5562_REG_PROG_MEM_ENG2 0x30
68#define LP5562_REG_PROG_MEM_ENG3 0x50
69
70/* LEDMAP Register 70h */
71#define LP5562_REG_ENG_SEL 0x70
72#define LP5562_ENG_SEL_PWM 0
73#define LP5562_ENG_FOR_RGB_M 0x3F
74#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
75#define LP5562_ENG_FOR_W_M 0xC0
76#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
77#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
78#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
79
80/* Program Commands */
81#define LP5562_CMD_DISABLE 0x00
82#define LP5562_CMD_LOAD 0x15
83#define LP5562_CMD_RUN 0x2A
84#define LP5562_CMD_DIRECT 0x3F
85#define LP5562_PATTERN_OFF 0
86
87static inline void lp5562_wait_opmode_done(void)
88{
89 /* operation mode change needs to be longer than 153 us */
90 usleep_range(200, 300);
91}
92
93static inline void lp5562_wait_enable_done(void)
94{
95 /* it takes more 488 us to update ENABLE register */
96 usleep_range(500, 600);
97}
98
99static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
100{
101 static const u8 addr[] = {
102 LP5562_REG_R_CURRENT,
103 LP5562_REG_G_CURRENT,
104 LP5562_REG_B_CURRENT,
105 LP5562_REG_W_CURRENT,
106 };
107
108 led->led_current = led_current;
109 lp55xx_write(led->chip, addr[led->chan_nr], led_current);
110}
111
112static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
113{
114 int ret;
115
116 /* stop engine */
117 if (!start) {
118 lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
119 lp5562_wait_enable_done();
120 lp55xx_stop_all_engine(chip);
121 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
122 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
123 lp5562_wait_opmode_done();
124 return;
125 }
126
127 ret = lp55xx_run_engine_common(chip);
128 if (!ret)
129 lp5562_wait_enable_done();
130}
131
132static int lp5562_post_init_device(struct lp55xx_chip *chip)
133{
134 int ret;
135 u8 cfg = LP5562_DEFAULT_CFG;
136
137 /* Set all PWMs to direct control mode */
138 ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
139 if (ret)
140 return ret;
141
142 lp5562_wait_opmode_done();
143
144 /* Update configuration for the clock setting */
145 if (!lp55xx_is_extclk_used(chip))
146 cfg |= LP5562_CLK_INT;
147
148 ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
149 if (ret)
150 return ret;
151
152 /* Initialize all channels PWM to zero -> leds off */
153 lp55xx_write(chip, LP5562_REG_R_PWM, 0);
154 lp55xx_write(chip, LP5562_REG_G_PWM, 0);
155 lp55xx_write(chip, LP5562_REG_B_PWM, 0);
156 lp55xx_write(chip, LP5562_REG_W_PWM, 0);
157
158 /* Set LED map as register PWM by default */
159 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
160
161 return 0;
162}
163
164static int lp5562_multicolor_brightness(struct lp55xx_led *led)
165{
166 struct lp55xx_chip *chip = led->chip;
167 static const u8 addr[] = {
168 LP5562_REG_R_PWM,
169 LP5562_REG_G_PWM,
170 LP5562_REG_B_PWM,
171 LP5562_REG_W_PWM,
172 };
173 int ret;
174 int i;
175
176 guard(mutex)(&chip->lock);
177 for (i = 0; i < led->mc_cdev.num_colors; i++) {
178 ret = lp55xx_write(chip,
179 addr[led->mc_cdev.subled_info[i].channel],
180 led->mc_cdev.subled_info[i].brightness);
181 if (ret)
182 break;
183 }
184
185 return ret;
186}
187
188static int lp5562_led_brightness(struct lp55xx_led *led)
189{
190 struct lp55xx_chip *chip = led->chip;
191 static const u8 addr[] = {
192 LP5562_REG_R_PWM,
193 LP5562_REG_G_PWM,
194 LP5562_REG_B_PWM,
195 LP5562_REG_W_PWM,
196 };
197 int ret;
198
199 guard(mutex)(&chip->lock);
200
201 ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness);
202
203 return ret;
204}
205
206static void lp5562_write_program_memory(struct lp55xx_chip *chip,
207 u8 base, const u8 *rgb, int size)
208{
209 int i;
210
211 if (!rgb || size <= 0)
212 return;
213
214 for (i = 0; i < size; i++)
215 lp55xx_write(chip, base + i, *(rgb + i));
216
217 lp55xx_write(chip, base + i, 0);
218 lp55xx_write(chip, base + i + 1, 0);
219}
220
221/* check the size of program count */
222static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
223{
224 return ptn->size_r >= LP55xx_BYTES_PER_PAGE ||
225 ptn->size_g >= LP55xx_BYTES_PER_PAGE ||
226 ptn->size_b >= LP55xx_BYTES_PER_PAGE;
227}
228
229static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
230{
231 struct lp55xx_predef_pattern *ptn;
232 int i;
233
234 if (mode == LP5562_PATTERN_OFF) {
235 lp5562_run_engine(chip, false);
236 return 0;
237 }
238
239 ptn = chip->pdata->patterns + (mode - 1);
240 if (!ptn || _is_pc_overflow(ptn)) {
241 dev_err(&chip->cl->dev, "invalid pattern data\n");
242 return -EINVAL;
243 }
244
245 lp55xx_stop_all_engine(chip);
246
247 /* Set LED map as RGB */
248 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
249
250 /* Load engines */
251 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
252 chip->engine_idx = i;
253 lp55xx_load_engine(chip);
254 }
255
256 /* Clear program registers */
257 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
258 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
259 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
260 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
261 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
262 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
263
264 /* Program engines */
265 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
266 ptn->r, ptn->size_r);
267 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
268 ptn->g, ptn->size_g);
269 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
270 ptn->b, ptn->size_b);
271
272 /* Run engines */
273 lp5562_run_engine(chip, true);
274
275 return 0;
276}
277
278static ssize_t lp5562_store_pattern(struct device *dev,
279 struct device_attribute *attr,
280 const char *buf, size_t len)
281{
282 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
283 struct lp55xx_chip *chip = led->chip;
284 struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
285 int num_patterns = chip->pdata->num_patterns;
286 unsigned long mode;
287 int ret;
288
289 ret = kstrtoul(buf, 0, &mode);
290 if (ret)
291 return ret;
292
293 if (mode > num_patterns || !ptn)
294 return -EINVAL;
295
296 guard(mutex)(&chip->lock);
297
298 ret = lp5562_run_predef_led_pattern(chip, mode);
299
300 if (ret)
301 return ret;
302
303 return len;
304}
305
306static ssize_t lp5562_store_engine_mux(struct device *dev,
307 struct device_attribute *attr,
308 const char *buf, size_t len)
309{
310 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
311 struct lp55xx_chip *chip = led->chip;
312 u8 mask;
313 u8 val;
314
315 /* LED map
316 * R ... Engine 1 (fixed)
317 * G ... Engine 2 (fixed)
318 * B ... Engine 3 (fixed)
319 * W ... Engine 1 or 2 or 3
320 */
321
322 if (sysfs_streq(buf, "RGB")) {
323 mask = LP5562_ENG_FOR_RGB_M;
324 val = LP5562_ENG_SEL_RGB;
325 } else if (sysfs_streq(buf, "W")) {
326 enum lp55xx_engine_index idx = chip->engine_idx;
327
328 mask = LP5562_ENG_FOR_W_M;
329 switch (idx) {
330 case LP55XX_ENGINE_1:
331 val = LP5562_ENG1_FOR_W;
332 break;
333 case LP55XX_ENGINE_2:
334 val = LP5562_ENG2_FOR_W;
335 break;
336 case LP55XX_ENGINE_3:
337 val = LP5562_ENG3_FOR_W;
338 break;
339 default:
340 return -EINVAL;
341 }
342
343 } else {
344 dev_err(dev, "choose RGB or W\n");
345 return -EINVAL;
346 }
347
348 guard(mutex)(&chip->lock);
349
350 lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
351
352 return len;
353}
354
355static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
356static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
357
358static struct attribute *lp5562_attributes[] = {
359 &dev_attr_led_pattern.attr,
360 &dev_attr_engine_mux.attr,
361 NULL,
362};
363
364static const struct attribute_group lp5562_group = {
365 .attrs = lp5562_attributes,
366};
367
368/* Chip specific configurations */
369static struct lp55xx_device_config lp5562_cfg = {
370 .max_channel = LP5562_MAX_LEDS,
371 .reg_op_mode = {
372 .addr = LP5562_REG_OP_MODE,
373 },
374 .reg_exec = {
375 .addr = LP5562_REG_ENABLE,
376 },
377 .reset = {
378 .addr = LP5562_REG_RESET,
379 .val = LP5562_RESET,
380 },
381 .enable = {
382 .addr = LP5562_REG_ENABLE,
383 .val = LP5562_ENABLE_DEFAULT,
384 },
385 .prog_mem_base = {
386 .addr = LP5562_REG_PROG_MEM_ENG1,
387 },
388 .post_init_device = lp5562_post_init_device,
389 .set_led_current = lp5562_set_led_current,
390 .brightness_fn = lp5562_led_brightness,
391 .multicolor_brightness_fn = lp5562_multicolor_brightness,
392 .run_engine = lp5562_run_engine,
393 .firmware_cb = lp55xx_firmware_loaded_cb,
394 .dev_attr_group = &lp5562_group,
395};
396
397static const struct i2c_device_id lp5562_id[] = {
398 { "lp5562", .driver_data = (kernel_ulong_t)&lp5562_cfg, },
399 { }
400};
401MODULE_DEVICE_TABLE(i2c, lp5562_id);
402
403static const struct of_device_id of_lp5562_leds_match[] = {
404 { .compatible = "ti,lp5562", .data = &lp5562_cfg, },
405 {},
406};
407
408MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
409
410static struct i2c_driver lp5562_driver = {
411 .driver = {
412 .name = "lp5562",
413 .of_match_table = of_lp5562_leds_match,
414 },
415 .probe = lp55xx_probe,
416 .remove = lp55xx_remove,
417 .id_table = lp5562_id,
418};
419
420module_i2c_driver(lp5562_driver);
421
422MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
423MODULE_AUTHOR("Milo Kim");
424MODULE_LICENSE("GPL");
1/*
2 * LP5562 LED driver
3 *
4 * Copyright (C) 2013 Texas Instruments
5 *
6 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/delay.h>
14#include <linux/firmware.h>
15#include <linux/i2c.h>
16#include <linux/leds.h>
17#include <linux/module.h>
18#include <linux/mutex.h>
19#include <linux/of.h>
20#include <linux/platform_data/leds-lp55xx.h>
21#include <linux/slab.h>
22
23#include "leds-lp55xx-common.h"
24
25#define LP5562_PROGRAM_LENGTH 32
26#define LP5562_MAX_LEDS 4
27
28/* ENABLE Register 00h */
29#define LP5562_REG_ENABLE 0x00
30#define LP5562_EXEC_ENG1_M 0x30
31#define LP5562_EXEC_ENG2_M 0x0C
32#define LP5562_EXEC_ENG3_M 0x03
33#define LP5562_EXEC_M 0x3F
34#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
35#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
36#define LP5562_EXEC_RUN 0x2A
37#define LP5562_ENABLE_DEFAULT \
38 (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
39#define LP5562_ENABLE_RUN_PROGRAM \
40 (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
41
42/* OPMODE Register 01h */
43#define LP5562_REG_OP_MODE 0x01
44#define LP5562_MODE_ENG1_M 0x30
45#define LP5562_MODE_ENG2_M 0x0C
46#define LP5562_MODE_ENG3_M 0x03
47#define LP5562_LOAD_ENG1 0x10
48#define LP5562_LOAD_ENG2 0x04
49#define LP5562_LOAD_ENG3 0x01
50#define LP5562_RUN_ENG1 0x20
51#define LP5562_RUN_ENG2 0x08
52#define LP5562_RUN_ENG3 0x02
53#define LP5562_ENG1_IS_LOADING(mode) \
54 ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
55#define LP5562_ENG2_IS_LOADING(mode) \
56 ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
57#define LP5562_ENG3_IS_LOADING(mode) \
58 ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
59
60/* BRIGHTNESS Registers */
61#define LP5562_REG_R_PWM 0x04
62#define LP5562_REG_G_PWM 0x03
63#define LP5562_REG_B_PWM 0x02
64#define LP5562_REG_W_PWM 0x0E
65
66/* CURRENT Registers */
67#define LP5562_REG_R_CURRENT 0x07
68#define LP5562_REG_G_CURRENT 0x06
69#define LP5562_REG_B_CURRENT 0x05
70#define LP5562_REG_W_CURRENT 0x0F
71
72/* CONFIG Register 08h */
73#define LP5562_REG_CONFIG 0x08
74#define LP5562_PWM_HF 0x40
75#define LP5562_PWRSAVE_EN 0x20
76#define LP5562_CLK_INT 0x01 /* Internal clock */
77#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
78
79/* RESET Register 0Dh */
80#define LP5562_REG_RESET 0x0D
81#define LP5562_RESET 0xFF
82
83/* PROGRAM ENGINE Registers */
84#define LP5562_REG_PROG_MEM_ENG1 0x10
85#define LP5562_REG_PROG_MEM_ENG2 0x30
86#define LP5562_REG_PROG_MEM_ENG3 0x50
87
88/* LEDMAP Register 70h */
89#define LP5562_REG_ENG_SEL 0x70
90#define LP5562_ENG_SEL_PWM 0
91#define LP5562_ENG_FOR_RGB_M 0x3F
92#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
93#define LP5562_ENG_FOR_W_M 0xC0
94#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
95#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
96#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
97
98/* Program Commands */
99#define LP5562_CMD_DISABLE 0x00
100#define LP5562_CMD_LOAD 0x15
101#define LP5562_CMD_RUN 0x2A
102#define LP5562_CMD_DIRECT 0x3F
103#define LP5562_PATTERN_OFF 0
104
105static inline void lp5562_wait_opmode_done(void)
106{
107 /* operation mode change needs to be longer than 153 us */
108 usleep_range(200, 300);
109}
110
111static inline void lp5562_wait_enable_done(void)
112{
113 /* it takes more 488 us to update ENABLE register */
114 usleep_range(500, 600);
115}
116
117static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
118{
119 u8 addr[] = {
120 LP5562_REG_R_CURRENT,
121 LP5562_REG_G_CURRENT,
122 LP5562_REG_B_CURRENT,
123 LP5562_REG_W_CURRENT,
124 };
125
126 led->led_current = led_current;
127 lp55xx_write(led->chip, addr[led->chan_nr], led_current);
128}
129
130static void lp5562_load_engine(struct lp55xx_chip *chip)
131{
132 enum lp55xx_engine_index idx = chip->engine_idx;
133 u8 mask[] = {
134 [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
135 [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
136 [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
137 };
138
139 u8 val[] = {
140 [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
141 [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
142 [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
143 };
144
145 lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
146
147 lp5562_wait_opmode_done();
148}
149
150static void lp5562_stop_engine(struct lp55xx_chip *chip)
151{
152 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
153 lp5562_wait_opmode_done();
154}
155
156static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
157{
158 int ret;
159 u8 mode;
160 u8 exec;
161
162 /* stop engine */
163 if (!start) {
164 lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
165 lp5562_wait_enable_done();
166 lp5562_stop_engine(chip);
167 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
168 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
169 lp5562_wait_opmode_done();
170 return;
171 }
172
173 /*
174 * To run the engine,
175 * operation mode and enable register should updated at the same time
176 */
177
178 ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
179 if (ret)
180 return;
181
182 ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
183 if (ret)
184 return;
185
186 /* change operation mode to RUN only when each engine is loading */
187 if (LP5562_ENG1_IS_LOADING(mode)) {
188 mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
189 exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
190 }
191
192 if (LP5562_ENG2_IS_LOADING(mode)) {
193 mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
194 exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
195 }
196
197 if (LP5562_ENG3_IS_LOADING(mode)) {
198 mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
199 exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
200 }
201
202 lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
203 lp5562_wait_opmode_done();
204
205 lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
206 lp5562_wait_enable_done();
207}
208
209static int lp5562_update_firmware(struct lp55xx_chip *chip,
210 const u8 *data, size_t size)
211{
212 enum lp55xx_engine_index idx = chip->engine_idx;
213 u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
214 u8 addr[] = {
215 [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
216 [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
217 [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
218 };
219 unsigned cmd;
220 char c[3];
221 int program_size;
222 int nrchars;
223 int offset = 0;
224 int ret;
225 int i;
226
227 /* clear program memory before updating */
228 for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
229 lp55xx_write(chip, addr[idx] + i, 0);
230
231 i = 0;
232 while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
233 /* separate sscanfs because length is working only for %s */
234 ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
235 if (ret != 1)
236 goto err;
237
238 ret = sscanf(c, "%2x", &cmd);
239 if (ret != 1)
240 goto err;
241
242 pattern[i] = (u8)cmd;
243 offset += nrchars;
244 i++;
245 }
246
247 /* Each instruction is 16bit long. Check that length is even */
248 if (i % 2)
249 goto err;
250
251 program_size = i;
252 for (i = 0; i < program_size; i++)
253 lp55xx_write(chip, addr[idx] + i, pattern[i]);
254
255 return 0;
256
257err:
258 dev_err(&chip->cl->dev, "wrong pattern format\n");
259 return -EINVAL;
260}
261
262static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
263{
264 const struct firmware *fw = chip->fw;
265
266 if (fw->size > LP5562_PROGRAM_LENGTH) {
267 dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
268 fw->size);
269 return;
270 }
271
272 /*
273 * Program momery sequence
274 * 1) set engine mode to "LOAD"
275 * 2) write firmware data into program memory
276 */
277
278 lp5562_load_engine(chip);
279 lp5562_update_firmware(chip, fw->data, fw->size);
280}
281
282static int lp5562_post_init_device(struct lp55xx_chip *chip)
283{
284 int ret;
285 u8 cfg = LP5562_DEFAULT_CFG;
286
287 /* Set all PWMs to direct control mode */
288 ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
289 if (ret)
290 return ret;
291
292 lp5562_wait_opmode_done();
293
294 /* Update configuration for the clock setting */
295 if (!lp55xx_is_extclk_used(chip))
296 cfg |= LP5562_CLK_INT;
297
298 ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
299 if (ret)
300 return ret;
301
302 /* Initialize all channels PWM to zero -> leds off */
303 lp55xx_write(chip, LP5562_REG_R_PWM, 0);
304 lp55xx_write(chip, LP5562_REG_G_PWM, 0);
305 lp55xx_write(chip, LP5562_REG_B_PWM, 0);
306 lp55xx_write(chip, LP5562_REG_W_PWM, 0);
307
308 /* Set LED map as register PWM by default */
309 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
310
311 return 0;
312}
313
314static int lp5562_led_brightness(struct lp55xx_led *led)
315{
316 struct lp55xx_chip *chip = led->chip;
317 u8 addr[] = {
318 LP5562_REG_R_PWM,
319 LP5562_REG_G_PWM,
320 LP5562_REG_B_PWM,
321 LP5562_REG_W_PWM,
322 };
323 int ret;
324
325 mutex_lock(&chip->lock);
326 ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness);
327 mutex_unlock(&chip->lock);
328
329 return ret;
330}
331
332static void lp5562_write_program_memory(struct lp55xx_chip *chip,
333 u8 base, const u8 *rgb, int size)
334{
335 int i;
336
337 if (!rgb || size <= 0)
338 return;
339
340 for (i = 0; i < size; i++)
341 lp55xx_write(chip, base + i, *(rgb + i));
342
343 lp55xx_write(chip, base + i, 0);
344 lp55xx_write(chip, base + i + 1, 0);
345}
346
347/* check the size of program count */
348static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
349{
350 return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
351 ptn->size_g >= LP5562_PROGRAM_LENGTH ||
352 ptn->size_b >= LP5562_PROGRAM_LENGTH;
353}
354
355static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
356{
357 struct lp55xx_predef_pattern *ptn;
358 int i;
359
360 if (mode == LP5562_PATTERN_OFF) {
361 lp5562_run_engine(chip, false);
362 return 0;
363 }
364
365 ptn = chip->pdata->patterns + (mode - 1);
366 if (!ptn || _is_pc_overflow(ptn)) {
367 dev_err(&chip->cl->dev, "invalid pattern data\n");
368 return -EINVAL;
369 }
370
371 lp5562_stop_engine(chip);
372
373 /* Set LED map as RGB */
374 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
375
376 /* Load engines */
377 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
378 chip->engine_idx = i;
379 lp5562_load_engine(chip);
380 }
381
382 /* Clear program registers */
383 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
384 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
385 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
386 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
387 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
388 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
389
390 /* Program engines */
391 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
392 ptn->r, ptn->size_r);
393 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
394 ptn->g, ptn->size_g);
395 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
396 ptn->b, ptn->size_b);
397
398 /* Run engines */
399 lp5562_run_engine(chip, true);
400
401 return 0;
402}
403
404static ssize_t lp5562_store_pattern(struct device *dev,
405 struct device_attribute *attr,
406 const char *buf, size_t len)
407{
408 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
409 struct lp55xx_chip *chip = led->chip;
410 struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
411 int num_patterns = chip->pdata->num_patterns;
412 unsigned long mode;
413 int ret;
414
415 ret = kstrtoul(buf, 0, &mode);
416 if (ret)
417 return ret;
418
419 if (mode > num_patterns || !ptn)
420 return -EINVAL;
421
422 mutex_lock(&chip->lock);
423 ret = lp5562_run_predef_led_pattern(chip, mode);
424 mutex_unlock(&chip->lock);
425
426 if (ret)
427 return ret;
428
429 return len;
430}
431
432static ssize_t lp5562_store_engine_mux(struct device *dev,
433 struct device_attribute *attr,
434 const char *buf, size_t len)
435{
436 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
437 struct lp55xx_chip *chip = led->chip;
438 u8 mask;
439 u8 val;
440
441 /* LED map
442 * R ... Engine 1 (fixed)
443 * G ... Engine 2 (fixed)
444 * B ... Engine 3 (fixed)
445 * W ... Engine 1 or 2 or 3
446 */
447
448 if (sysfs_streq(buf, "RGB")) {
449 mask = LP5562_ENG_FOR_RGB_M;
450 val = LP5562_ENG_SEL_RGB;
451 } else if (sysfs_streq(buf, "W")) {
452 enum lp55xx_engine_index idx = chip->engine_idx;
453
454 mask = LP5562_ENG_FOR_W_M;
455 switch (idx) {
456 case LP55XX_ENGINE_1:
457 val = LP5562_ENG1_FOR_W;
458 break;
459 case LP55XX_ENGINE_2:
460 val = LP5562_ENG2_FOR_W;
461 break;
462 case LP55XX_ENGINE_3:
463 val = LP5562_ENG3_FOR_W;
464 break;
465 default:
466 return -EINVAL;
467 }
468
469 } else {
470 dev_err(dev, "choose RGB or W\n");
471 return -EINVAL;
472 }
473
474 mutex_lock(&chip->lock);
475 lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
476 mutex_unlock(&chip->lock);
477
478 return len;
479}
480
481static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
482static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
483
484static struct attribute *lp5562_attributes[] = {
485 &dev_attr_led_pattern.attr,
486 &dev_attr_engine_mux.attr,
487 NULL,
488};
489
490static const struct attribute_group lp5562_group = {
491 .attrs = lp5562_attributes,
492};
493
494/* Chip specific configurations */
495static struct lp55xx_device_config lp5562_cfg = {
496 .max_channel = LP5562_MAX_LEDS,
497 .reset = {
498 .addr = LP5562_REG_RESET,
499 .val = LP5562_RESET,
500 },
501 .enable = {
502 .addr = LP5562_REG_ENABLE,
503 .val = LP5562_ENABLE_DEFAULT,
504 },
505 .post_init_device = lp5562_post_init_device,
506 .set_led_current = lp5562_set_led_current,
507 .brightness_fn = lp5562_led_brightness,
508 .run_engine = lp5562_run_engine,
509 .firmware_cb = lp5562_firmware_loaded,
510 .dev_attr_group = &lp5562_group,
511};
512
513static int lp5562_probe(struct i2c_client *client,
514 const struct i2c_device_id *id)
515{
516 int ret;
517 struct lp55xx_chip *chip;
518 struct lp55xx_led *led;
519 struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
520 struct device_node *np = client->dev.of_node;
521
522 if (!pdata) {
523 if (np) {
524 pdata = lp55xx_of_populate_pdata(&client->dev, np);
525 if (IS_ERR(pdata))
526 return PTR_ERR(pdata);
527 } else {
528 dev_err(&client->dev, "no platform data\n");
529 return -EINVAL;
530 }
531 }
532
533 chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
534 if (!chip)
535 return -ENOMEM;
536
537 led = devm_kzalloc(&client->dev,
538 sizeof(*led) * pdata->num_channels, GFP_KERNEL);
539 if (!led)
540 return -ENOMEM;
541
542 chip->cl = client;
543 chip->pdata = pdata;
544 chip->cfg = &lp5562_cfg;
545
546 mutex_init(&chip->lock);
547
548 i2c_set_clientdata(client, led);
549
550 ret = lp55xx_init_device(chip);
551 if (ret)
552 goto err_init;
553
554 ret = lp55xx_register_leds(led, chip);
555 if (ret)
556 goto err_register_leds;
557
558 ret = lp55xx_register_sysfs(chip);
559 if (ret) {
560 dev_err(&client->dev, "registering sysfs failed\n");
561 goto err_register_sysfs;
562 }
563
564 return 0;
565
566err_register_sysfs:
567 lp55xx_unregister_leds(led, chip);
568err_register_leds:
569 lp55xx_deinit_device(chip);
570err_init:
571 return ret;
572}
573
574static int lp5562_remove(struct i2c_client *client)
575{
576 struct lp55xx_led *led = i2c_get_clientdata(client);
577 struct lp55xx_chip *chip = led->chip;
578
579 lp5562_stop_engine(chip);
580
581 lp55xx_unregister_sysfs(chip);
582 lp55xx_unregister_leds(led, chip);
583 lp55xx_deinit_device(chip);
584
585 return 0;
586}
587
588static const struct i2c_device_id lp5562_id[] = {
589 { "lp5562", 0 },
590 { }
591};
592MODULE_DEVICE_TABLE(i2c, lp5562_id);
593
594#ifdef CONFIG_OF
595static const struct of_device_id of_lp5562_leds_match[] = {
596 { .compatible = "ti,lp5562", },
597 {},
598};
599
600MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
601#endif
602
603static struct i2c_driver lp5562_driver = {
604 .driver = {
605 .name = "lp5562",
606 .of_match_table = of_match_ptr(of_lp5562_leds_match),
607 },
608 .probe = lp5562_probe,
609 .remove = lp5562_remove,
610 .id_table = lp5562_id,
611};
612
613module_i2c_driver(lp5562_driver);
614
615MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
616MODULE_AUTHOR("Milo Kim");
617MODULE_LICENSE("GPL");