Linux Audio

Check our new training course

Loading...
v6.13.7
  1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
  2/*******************************************************************************
  3 *
  4 * Module Name: evsci - System Control Interrupt configuration and
  5 *                      legacy to ACPI mode state transition functions
  6 *
  7 ******************************************************************************/
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  8
  9#include <acpi/acpi.h>
 10#include "accommon.h"
 11#include "acevents.h"
 12
 13#define _COMPONENT          ACPI_EVENTS
 14ACPI_MODULE_NAME("evsci")
 15#if (!ACPI_REDUCED_HARDWARE)	/* Entire module */
 16/* Local prototypes */
 17static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context);
 18
 19/*******************************************************************************
 20 *
 21 * FUNCTION:    acpi_ev_sci_dispatch
 22 *
 23 * PARAMETERS:  None
 24 *
 25 * RETURN:      Status code indicates whether interrupt was handled.
 26 *
 27 * DESCRIPTION: Dispatch the SCI to all host-installed SCI handlers.
 28 *
 29 ******************************************************************************/
 30
 31u32 acpi_ev_sci_dispatch(void)
 32{
 33	struct acpi_sci_handler_info *sci_handler;
 34	acpi_cpu_flags flags;
 35	u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
 36
 37	ACPI_FUNCTION_NAME(ev_sci_dispatch);
 38
 39	/* Are there any host-installed SCI handlers? */
 40
 41	if (!acpi_gbl_sci_handler_list) {
 42		return (int_status);
 43	}
 44
 45	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 46
 47	/* Invoke all host-installed SCI handlers */
 48
 49	sci_handler = acpi_gbl_sci_handler_list;
 50	while (sci_handler) {
 51
 52		/* Invoke the installed handler (at interrupt level) */
 53
 54		int_status |= sci_handler->address(sci_handler->context);
 55
 56		sci_handler = sci_handler->next;
 57	}
 58
 59	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 60	return (int_status);
 61}
 62
 63/*******************************************************************************
 64 *
 65 * FUNCTION:    acpi_ev_sci_xrupt_handler
 66 *
 67 * PARAMETERS:  context   - Calling Context
 68 *
 69 * RETURN:      Status code indicates whether interrupt was handled.
 70 *
 71 * DESCRIPTION: Interrupt handler that will figure out what function or
 72 *              control method to call to deal with a SCI.
 73 *
 74 ******************************************************************************/
 75
 76static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context)
 77{
 78	struct acpi_gpe_xrupt_info *gpe_xrupt_list = context;
 79	u32 interrupt_handled = ACPI_INTERRUPT_NOT_HANDLED;
 80
 81	ACPI_FUNCTION_TRACE(ev_sci_xrupt_handler);
 82
 83	/*
 84	 * We are guaranteed by the ACPICA initialization/shutdown code that
 85	 * if this interrupt handler is installed, ACPI is enabled.
 86	 */
 87
 88	/*
 89	 * Fixed Events:
 90	 * Check for and dispatch any Fixed Events that have occurred
 91	 */
 92	interrupt_handled |= acpi_ev_fixed_event_detect();
 93
 94	/*
 95	 * General Purpose Events:
 96	 * Check for and dispatch any GPEs that have occurred
 97	 */
 98	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
 99
100	/* Invoke all host-installed SCI handlers */
101
102	interrupt_handled |= acpi_ev_sci_dispatch();
103
104	acpi_sci_count++;
105	return_UINT32(interrupt_handled);
106}
107
108/*******************************************************************************
109 *
110 * FUNCTION:    acpi_ev_gpe_xrupt_handler
111 *
112 * PARAMETERS:  context   - Calling Context
113 *
114 * RETURN:      Status code indicates whether interrupt was handled.
115 *
116 * DESCRIPTION: Handler for GPE Block Device interrupts
117 *
118 ******************************************************************************/
119
120u32 ACPI_SYSTEM_XFACE acpi_ev_gpe_xrupt_handler(void *context)
121{
122	struct acpi_gpe_xrupt_info *gpe_xrupt_list = context;
123	u32 interrupt_handled = ACPI_INTERRUPT_NOT_HANDLED;
124
125	ACPI_FUNCTION_TRACE(ev_gpe_xrupt_handler);
126
127	/*
128	 * We are guaranteed by the ACPICA initialization/shutdown code that
129	 * if this interrupt handler is installed, ACPI is enabled.
130	 */
131
132	/* GPEs: Check for and dispatch any GPEs that have occurred */
133
134	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
135	return_UINT32(interrupt_handled);
136}
137
138/******************************************************************************
139 *
140 * FUNCTION:    acpi_ev_install_sci_handler
141 *
142 * PARAMETERS:  none
143 *
144 * RETURN:      Status
145 *
146 * DESCRIPTION: Installs SCI handler.
147 *
148 ******************************************************************************/
149
150u32 acpi_ev_install_sci_handler(void)
151{
152	u32 status = AE_OK;
153
154	ACPI_FUNCTION_TRACE(ev_install_sci_handler);
155
156	status =
157	    acpi_os_install_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
158					      acpi_ev_sci_xrupt_handler,
159					      acpi_gbl_gpe_xrupt_list_head);
160	return_ACPI_STATUS(status);
161}
162
163/******************************************************************************
164 *
165 * FUNCTION:    acpi_ev_remove_all_sci_handlers
166 *
167 * PARAMETERS:  none
168 *
169 * RETURN:      AE_OK if handler uninstalled, AE_ERROR if handler was not
170 *              installed to begin with
171 *
172 * DESCRIPTION: Remove the SCI interrupt handler. No further SCIs will be
173 *              taken. Remove all host-installed SCI handlers.
174 *
175 * Note:  It doesn't seem important to disable all events or set the event
176 *        enable registers to their original values. The OS should disable
177 *        the SCI interrupt level when the handler is removed, so no more
178 *        events will come in.
179 *
180 ******************************************************************************/
181
182acpi_status acpi_ev_remove_all_sci_handlers(void)
183{
184	struct acpi_sci_handler_info *sci_handler;
185	acpi_cpu_flags flags;
186	acpi_status status;
187
188	ACPI_FUNCTION_TRACE(ev_remove_all_sci_handlers);
189
190	/* Just let the OS remove the handler and disable the level */
191
192	status =
193	    acpi_os_remove_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
194					     acpi_ev_sci_xrupt_handler);
195
196	if (!acpi_gbl_sci_handler_list) {
197		return (status);
198	}
199
200	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
201
202	/* Free all host-installed SCI handlers */
203
204	while (acpi_gbl_sci_handler_list) {
205		sci_handler = acpi_gbl_sci_handler_list;
206		acpi_gbl_sci_handler_list = sci_handler->next;
207		ACPI_FREE(sci_handler);
208	}
209
210	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
211	return_ACPI_STATUS(status);
212}
213
214#endif				/* !ACPI_REDUCED_HARDWARE */
v4.6
 
  1/*******************************************************************************
  2 *
  3 * Module Name: evsci - System Control Interrupt configuration and
  4 *                      legacy to ACPI mode state transition functions
  5 *
  6 ******************************************************************************/
  7
  8/*
  9 * Copyright (C) 2000 - 2016, Intel Corp.
 10 * All rights reserved.
 11 *
 12 * Redistribution and use in source and binary forms, with or without
 13 * modification, are permitted provided that the following conditions
 14 * are met:
 15 * 1. Redistributions of source code must retain the above copyright
 16 *    notice, this list of conditions, and the following disclaimer,
 17 *    without modification.
 18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 19 *    substantially similar to the "NO WARRANTY" disclaimer below
 20 *    ("Disclaimer") and any redistribution must be conditioned upon
 21 *    including a substantially similar Disclaimer requirement for further
 22 *    binary redistribution.
 23 * 3. Neither the names of the above-listed copyright holders nor the names
 24 *    of any contributors may be used to endorse or promote products derived
 25 *    from this software without specific prior written permission.
 26 *
 27 * Alternatively, this software may be distributed under the terms of the
 28 * GNU General Public License ("GPL") version 2 as published by the Free
 29 * Software Foundation.
 30 *
 31 * NO WARRANTY
 32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 42 * POSSIBILITY OF SUCH DAMAGES.
 43 */
 44
 45#include <acpi/acpi.h>
 46#include "accommon.h"
 47#include "acevents.h"
 48
 49#define _COMPONENT          ACPI_EVENTS
 50ACPI_MODULE_NAME("evsci")
 51#if (!ACPI_REDUCED_HARDWARE)	/* Entire module */
 52/* Local prototypes */
 53static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context);
 54
 55/*******************************************************************************
 56 *
 57 * FUNCTION:    acpi_ev_sci_dispatch
 58 *
 59 * PARAMETERS:  None
 60 *
 61 * RETURN:      Status code indicates whether interrupt was handled.
 62 *
 63 * DESCRIPTION: Dispatch the SCI to all host-installed SCI handlers.
 64 *
 65 ******************************************************************************/
 66
 67u32 acpi_ev_sci_dispatch(void)
 68{
 69	struct acpi_sci_handler_info *sci_handler;
 70	acpi_cpu_flags flags;
 71	u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
 72
 73	ACPI_FUNCTION_NAME(ev_sci_dispatch);
 74
 75	/* Are there any host-installed SCI handlers? */
 76
 77	if (!acpi_gbl_sci_handler_list) {
 78		return (int_status);
 79	}
 80
 81	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 82
 83	/* Invoke all host-installed SCI handlers */
 84
 85	sci_handler = acpi_gbl_sci_handler_list;
 86	while (sci_handler) {
 87
 88		/* Invoke the installed handler (at interrupt level) */
 89
 90		int_status |= sci_handler->address(sci_handler->context);
 91
 92		sci_handler = sci_handler->next;
 93	}
 94
 95	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 96	return (int_status);
 97}
 98
 99/*******************************************************************************
100 *
101 * FUNCTION:    acpi_ev_sci_xrupt_handler
102 *
103 * PARAMETERS:  context   - Calling Context
104 *
105 * RETURN:      Status code indicates whether interrupt was handled.
106 *
107 * DESCRIPTION: Interrupt handler that will figure out what function or
108 *              control method to call to deal with a SCI.
109 *
110 ******************************************************************************/
111
112static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context)
113{
114	struct acpi_gpe_xrupt_info *gpe_xrupt_list = context;
115	u32 interrupt_handled = ACPI_INTERRUPT_NOT_HANDLED;
116
117	ACPI_FUNCTION_TRACE(ev_sci_xrupt_handler);
118
119	/*
120	 * We are guaranteed by the ACPICA initialization/shutdown code that
121	 * if this interrupt handler is installed, ACPI is enabled.
122	 */
123
124	/*
125	 * Fixed Events:
126	 * Check for and dispatch any Fixed Events that have occurred
127	 */
128	interrupt_handled |= acpi_ev_fixed_event_detect();
129
130	/*
131	 * General Purpose Events:
132	 * Check for and dispatch any GPEs that have occurred
133	 */
134	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
135
136	/* Invoke all host-installed SCI handlers */
137
138	interrupt_handled |= acpi_ev_sci_dispatch();
139
140	acpi_sci_count++;
141	return_UINT32(interrupt_handled);
142}
143
144/*******************************************************************************
145 *
146 * FUNCTION:    acpi_ev_gpe_xrupt_handler
147 *
148 * PARAMETERS:  context   - Calling Context
149 *
150 * RETURN:      Status code indicates whether interrupt was handled.
151 *
152 * DESCRIPTION: Handler for GPE Block Device interrupts
153 *
154 ******************************************************************************/
155
156u32 ACPI_SYSTEM_XFACE acpi_ev_gpe_xrupt_handler(void *context)
157{
158	struct acpi_gpe_xrupt_info *gpe_xrupt_list = context;
159	u32 interrupt_handled = ACPI_INTERRUPT_NOT_HANDLED;
160
161	ACPI_FUNCTION_TRACE(ev_gpe_xrupt_handler);
162
163	/*
164	 * We are guaranteed by the ACPICA initialization/shutdown code that
165	 * if this interrupt handler is installed, ACPI is enabled.
166	 */
167
168	/* GPEs: Check for and dispatch any GPEs that have occurred */
169
170	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
171	return_UINT32(interrupt_handled);
172}
173
174/******************************************************************************
175 *
176 * FUNCTION:    acpi_ev_install_sci_handler
177 *
178 * PARAMETERS:  none
179 *
180 * RETURN:      Status
181 *
182 * DESCRIPTION: Installs SCI handler.
183 *
184 ******************************************************************************/
185
186u32 acpi_ev_install_sci_handler(void)
187{
188	u32 status = AE_OK;
189
190	ACPI_FUNCTION_TRACE(ev_install_sci_handler);
191
192	status =
193	    acpi_os_install_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
194					      acpi_ev_sci_xrupt_handler,
195					      acpi_gbl_gpe_xrupt_list_head);
196	return_ACPI_STATUS(status);
197}
198
199/******************************************************************************
200 *
201 * FUNCTION:    acpi_ev_remove_all_sci_handlers
202 *
203 * PARAMETERS:  none
204 *
205 * RETURN:      AE_OK if handler uninstalled, AE_ERROR if handler was not
206 *              installed to begin with
207 *
208 * DESCRIPTION: Remove the SCI interrupt handler. No further SCIs will be
209 *              taken. Remove all host-installed SCI handlers.
210 *
211 * Note:  It doesn't seem important to disable all events or set the event
212 *        enable registers to their original values. The OS should disable
213 *        the SCI interrupt level when the handler is removed, so no more
214 *        events will come in.
215 *
216 ******************************************************************************/
217
218acpi_status acpi_ev_remove_all_sci_handlers(void)
219{
220	struct acpi_sci_handler_info *sci_handler;
221	acpi_cpu_flags flags;
222	acpi_status status;
223
224	ACPI_FUNCTION_TRACE(ev_remove_all_sci_handlers);
225
226	/* Just let the OS remove the handler and disable the level */
227
228	status =
229	    acpi_os_remove_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
230					     acpi_ev_sci_xrupt_handler);
231
232	if (!acpi_gbl_sci_handler_list) {
233		return (status);
234	}
235
236	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
237
238	/* Free all host-installed SCI handlers */
239
240	while (acpi_gbl_sci_handler_list) {
241		sci_handler = acpi_gbl_sci_handler_list;
242		acpi_gbl_sci_handler_list = sci_handler->next;
243		ACPI_FREE(sci_handler);
244	}
245
246	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
247	return_ACPI_STATUS(status);
248}
249
250#endif				/* !ACPI_REDUCED_HARDWARE */