1/*
  2 * arch/arm/mach-dove/dove-db-setup.c
  3 *
  4 * Marvell DB-MV88AP510-BP Development Board Setup
  5 *
  6 * This file is licensed under the terms of the GNU General Public
  7 * License version 2.  This program is licensed "as is" without any
  8 * warranty of any kind, whether express or implied.
  9 */
 10
 11#include <linux/kernel.h>
 12#include <linux/init.h>
 13#include <linux/platform_device.h>
 14#include <linux/irq.h>
 15#include <linux/mtd/physmap.h>
 16#include <linux/mtd/nand.h>
 17#include <linux/timer.h>
 18#include <linux/ata_platform.h>
 19#include <linux/mv643xx_eth.h>
 20#include <linux/i2c.h>
 21#include <linux/pci.h>
 22#include <linux/spi/spi.h>
 23#include <linux/spi/flash.h>
 24#include <linux/gpio.h>
 25#include <asm/mach-types.h>
 26#include <asm/mach/arch.h>
 27#include <mach/dove.h>
 28#include "common.h"
 29
 30static struct mv643xx_eth_platform_data dove_db_ge00_data = {
 31	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
 32};
 33
 34static struct mv_sata_platform_data dove_db_sata_data = {
 35	.n_ports        = 1,
 36};
 37
 38/*****************************************************************************
 39 * SPI Devices:
 40 * 	SPI0: 4M Flash ST-M25P32-VMF6P
 41 ****************************************************************************/
 42static const struct flash_platform_data dove_db_spi_flash_data = {
 43	.type		= "m25p64",
 44};
 45
 46static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
 47	{
 48		.modalias       = "m25p80",
 49		.platform_data  = &dove_db_spi_flash_data,
 50		.irq            = -1,
 51		.max_speed_hz   = 20000000,
 52		.bus_num        = 0,
 53		.chip_select    = 0,
 54	},
 55};
 56
 57/*****************************************************************************
 58 * PCI
 59 ****************************************************************************/
 60static int __init dove_db_pci_init(void)
 61{
 62	if (machine_is_dove_db())
 63		dove_pcie_init(1, 1);
 64
 65	return 0;
 66}
 67
 68subsys_initcall(dove_db_pci_init);
 69
 70/*****************************************************************************
 71 * Board Init
 72 ****************************************************************************/
 73static void __init dove_db_init(void)
 74{
 75	/*
 76	 * Basic Dove setup. Needs to be called early.
 77	 */
 78	dove_init();
 79
 80	dove_ge00_init(&dove_db_ge00_data);
 81	dove_ehci0_init();
 82	dove_ehci1_init();
 83	dove_sata_init(&dove_db_sata_data);
 84	dove_sdio0_init();
 85	dove_sdio1_init();
 86	dove_spi0_init();
 87	dove_spi1_init();
 88	dove_uart0_init();
 89	dove_uart1_init();
 90	dove_i2c_init();
 91	spi_register_board_info(dove_db_spi_flash_info,
 92				ARRAY_SIZE(dove_db_spi_flash_info));
 93}
 94
 95MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 96	.atag_offset	= 0x100,
 97	.nr_irqs	= DOVE_NR_IRQS,
 98	.init_machine	= dove_db_init,
 99	.map_io		= dove_map_io,
100	.init_early	= dove_init_early,
101	.init_irq	= dove_init_irq,
102	.init_time	= dove_timer_init,
103	.restart	= dove_restart,
104MACHINE_END