1/*
  2 * Common support for omap3 EVM boards
  3 */
  4
  5#include <dt-bindings/input/input.h>
  6#include "omap-gpmc-smsc911x.dtsi"
  7
  8/ {
  9	cpus {
 10		cpu@0 {
 11			cpu0-supply = <&vcc>;
 12		};
 13	};
 14
 15	leds {
 16		compatible = "gpio-leds";
 17		ledb {
 18			label = "omap3evm::ledb";
 19			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 20			linux,default-trigger = "default-on";
 21		};
 22	};
 23
 24	wl12xx_vmmc: wl12xx_vmmc {
 25		compatible = "regulator-fixed";
 26		regulator-name = "vwl1271";
 27		regulator-min-microvolt = <1800000>;
 28		regulator-max-microvolt = <1800000>;
 29		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
 30		startup-delay-us = <70000>;
 31		enable-active-high;
 32		vin-supply = <&vmmc2>;
 33	};
 34};
 35
 36&i2c1 {
 37	clock-frequency = <2600000>;
 38
 39	twl: twl@48 {
 40		reg = <0x48>;
 41		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 42		interrupt-parent = <&intc>;
 43	};
 44};
 45
 46#include "twl4030.dtsi"
 47#include "twl4030_omap3.dtsi"
 48#include "omap3-panel-sharp-ls037v7dw01.dtsi"
 49
 50&backlight0 {
 51	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
 52};
 53
 54&twl {
 55	twl_power: power {
 56		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
 57		ti,use_poweroff;
 58	};
 59};
 60
 61&i2c2 {
 62	clock-frequency = <400000>;
 63};
 64
 65&i2c3 {
 66	clock-frequency = <400000>;
 67
 68	/*
 69	 * TVP5146 Video decoder-in for analog input support.
 70	 */
 71	tvp5146@5c {
 72		compatible = "ti,tvp5146m2";
 73		reg = <0x5c>;
 74	};
 75};
 76
 77&lcd_3v3 {
 78	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
 79	enable-active-low;
 80};
 81
 82&lcd0 {
 83	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
 84	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
 85	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
 86		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
 87		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
 88};
 89
 90&mcspi1 {
 91	tsc2046@0 {
 92		interrupt-parent = <&gpio6>;
 93		interrupts = <15 0>;		/* gpio175 */
 94		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 95	};
 96};
 97
 98&mmc1 {
 99	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
100	vmmc-supply = <&vmmc1>;
101	vmmc_aux-supply = <&vsim>;
102	bus-width = <8>;
103};
104
105&mmc2 {
106	vmmc-supply = <&wl12xx_vmmc>;
107	non-removable;
108	bus-width = <4>;
109	cap-power-off-card;
110
111	#address-cells = <1>;
112	#size-cells = <0>;
113	wlcore: wlcore@2 {
114		compatible = "ti,wl1271";
115		reg = <2>;
116		interrupt-parent = <&gpio5>;
117		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
118		ref-clock-frequency = <38400000>;
119	};
120};
121
122&twl_gpio {
123	ti,use-leds;
124};
125
126&twl_keypad {
127	linux,keymap = <
128			MATRIX_KEY(2, 2, KEY_1)
129			MATRIX_KEY(1, 1, KEY_2)
130			MATRIX_KEY(0, 0, KEY_3)
131			MATRIX_KEY(3, 2, KEY_4)
132			MATRIX_KEY(2, 1, KEY_5)
133			MATRIX_KEY(1, 0, KEY_6)
134			MATRIX_KEY(1, 3, KEY_7)
135			MATRIX_KEY(3, 1, KEY_8)
136			MATRIX_KEY(2, 0, KEY_9)
137			MATRIX_KEY(2, 3, KEY_KPASTERISK)
138			MATRIX_KEY(0, 2, KEY_0)
139			MATRIX_KEY(3, 0, KEY_KPDOT)
140			/* s4 not wired */
141			MATRIX_KEY(1, 2, KEY_BACKSPACE)
142			MATRIX_KEY(0, 1, KEY_ENTER)
143			>;
144};
145
146&usb_otg_hs {
147	interface-type = <0>;
148	usb-phy = <&usb2_phy>;
149	phys = <&usb2_phy>;
150	phy-names = "usb2-phy";
151	mode = <3>;
152	power = <50>;
153};
154
155&gpmc {
156	ethernet@gpmc {
157		interrupt-parent = <&gpio6>;
158		interrupts = <16 8>;
159		reg = <5 0 0xff>;
160	};
161};